Samsung | LE27S73BD | User's Manual | Samsung LE27S73BD User manual

Samsung LE27S73BD User manual
LCD TV
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
Customer Care Center
Web Site
BELGIUM
02 201 2418
www.samsung.com/be
CZECH REPUBLIC
844 000 844
www.samsung.com/cz
DENMARK
38 322 887
www.samsung.com/dk
FINLAND
09 693 79 554
www.samsung.com/fi
FRANCE
08 25 08 65 65 (€ 0,15/Min)
www.samsung.com/fr
GERMANY
01805 - 121213 (€ 0,12/Min)
www.samsung.de
HUNGARY
06 40 985 985
www.samsung.com/hu
ITALIA
199 153 153
www.samsung.com/it
LUXEMBURG
02 261 03 710
www.samsung.lu
NETHERLANDS
0900 20 200 88 (€ 0.10/Min)
www.samsung.com/nl
NORWAY
231 627 22
www.samsung.com/no
POLAND
0 801 801 881
www.samsung.com/pl
PORTUGAL
80 8 200 128
www.samsung.com/pt
RUSSIA
8-800-200-0400
www.samsung.ru
SLOVAKIA
0850 123 989
www.samsung.com/sk
SPAIN
902 10 11 30
www.samsung.com/es
SWEDEN
08 585 367 87
www.samsung.com/se
U.K
0870 242 0303
www.samsung.com/uk
UKRAINE
8-800-502-0000
www.samsung.com/ur
LE27S7
LE32S7
LE37S7
LE40S7
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
BN68-01007K-00
BN68-01007K-00Cover.indd 1
2006-07-05 �� 4:55:24
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
WARNINGS:
Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is
displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen.
These logos are common on many programmes received via a Setop Box. To reduce this risk, avoid displaying still images
for long durations and lower the brightness or contrast settings to decrease the intensity of the picture. Extended viewing
of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention.
Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black
borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is
not recommended. When using a PC input, avoid displaying still images for long durations and reduce the brightness or
contrast settings to decrease the intensity of the picture.
IMPORTANT:
Image retention issues are not covered by your Samsung® warranty.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on
the left, right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
•Displaying still images from Video games and PC for longer than a certain period of time may produce partial
after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2006 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01007K-00Eng DTV Still.indd1 1
2006-07-05 �� 4:55:34
Contents
Connecting and Preparing Your TV
uSING The DTV FeATuRe
List of Parts..............................................................................
Installing the Stand..................................................................
Installing the Wall Mount Kit............................................... Viewing the Control Panel.......................................................
Viewing the Connection Panel.................................................
Viewing the Remote Control....................................................
Installing Batteries in the Remote Control...............................
Switching On and Off...............................................................
Placing Your Television in Standby Mode...............................
Plug & Play..............................................................................
2
2
2
3
4
6
6
7
7
7
Setting the Channels
Storing Channels Automatically............................................... 8
Storing Channels Manually...................................................... 8
Setting the Channel Manager.................................................. 9
Activating the Child Lock.................................................... 9
Sorting the Stored Channels...................................................10
Assigning Channels Names....................................................10
Fine Tuning Channel Reception..............................................10
LNA (Low Noise Amplifier).......................................................11
Setting the Picture
Changing the Picture Standard...............................................11
Adjusting the Custom Picture..................................................11
Changing the Colour Tone.......................................................11
Resetting the Picture Settings to the Factory Defaults......................................................................12
Changing the Picture Size.......................................................12
Freezing the Current Picture...................................................12
Digital Noise Reduction...........................................................12
DNIe Demo (Digital Natural Image engine).............................13
Viewing the Picture In Picture (PIP)........................................13
PIP Settings.............................................................................14
Changing the Sound Standard........................................... 14
Adjusting the Sound Settings............................................. 14
Connecting Hheadphones.................................................. 14
Setting the TruSurround XT (SRS TSXT).......................... 15
Adjusting the Volume Automatically................................... 15
Selecting the Internal Mute................................................ 15
Listening to the Sound of the Sub Picture......................... 15
Resetting the Sound Settings to the Factory Defaults....... 16
Setting the Time
Using the Teletext Feature
Teletext Decoder................................................................ 29
Displaying the Teletext Information.................................... 29
Selecting a Specific Teletext Page..................................... 30
Using Fastext to Select a Teletext Page............................ 30
Setting Up Your Remote Control........................................ 31
Remote Control Codes...................................................... 33
Setting the PC
Setting the Sound
Previewing the DTV Menu System..........................................19
Updating the Channel List Automatically.................................19
Updating the Channel List Manually.................................. 20
Editing Your Favourite Channels.............................................20
Selecting Channel Manager....................................................21
Displaying Programme Information.........................................22
Viewing the EPG (Electronic Programme Guide)
Information...............................................................................22
Using the Scheduled List.........................................................23
Setting the Default Guide........................................................23
Viewing All Channels and Favourite Channels.......................24
Setting the Preferred Languages............................................24
Choosing Your Language........................................................25
Adjusting the Translucency Level...................................... 25
Setting up the Parental Lock...................................................25
Setting the Subtitle..................................................................26
Selecting the Preferred Language
(Subtitle or Audio)....................................................................26
Setting the Digital Text.............................................................26
Viewing Product Information....................................................27 Checking the Signal Information.............................................27
Upgrading the Software (Option).............................................27
Viewing Common Interface.....................................................28
Selecting the CI (Common Interface) Menu............................28
Resetting..................................................................................28
Setting and Displaying the Current Time........................... 16
Setting the Sleep Timer...................................................... 16
Switching the Television On and Off Automatically................................................... 16
Setting up Your PC Software (Based on Windows XP).................................................... 36
Display Modes.................................................................... 36
Setting the PC.................................................................... 37
Recommendations For Use
Using the Anti-Theft Kensington Lock................................ 38
Troubleshooting: Before Contacting Service Personnel................................ 38
Technical and Environmental Specifications . ................... 39
Warning! Important Safety Instructions
Wiring the Mains Power Supply Plug(UK Only)
Warranty Card
Setting the Others
Choosing Your Language................................................... 17
Using Game Mode............................................................. 17
Setting the Blue Screen Mode / Selecting the Melody ........................................................ 17
Using the Energy Saving Feature...................................... 18
Selecting the Source.......................................................... 18
Editing the Input Source Names........................................ 18
Symbol
Press
Important
Note
One-Touch
Button
English-
BN68-01007K-00Eng.indd 1
2006-07-05 �� 4:55:41
List of Parts
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
M4 X L16
Remote Control &
Batteries (AAA x 2)
 Owner’s Instructions
Power Cord
Cover-Bottom
 Warranty card
Stand Screw X 4
 Service Network Card
Stand
 Safety Guide
Cleaning Cloth
 Registration Cards
Warranty card / Service Network Card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Installing the Stand
<2>
<3>
1.Place the TV faced down on a soft cloth or cushion on a table.
2.Put the stand into the hole at the bottom of the TV.
3.Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 40 inch and above.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV
on the wall.
For detailed information on installing the wall mount, see the
instructions provided with the Wall Mount items. Contact a
technician for assistance when installing the wall mounted
bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV on your own.
emove the stand and cover the bottom hole with a cap
R
and fasten with two screws.
English-
BN68-01007K-00Eng.indd 2
2006-07-05 �� 4:55:42
Viewing the Control Panel
The product colour and shape may vary depending on the model.
SOURCE
Toggles between all the available input sources
(TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI,
DTV). In the on-screen menu, use this button as you use
the ENTER
button on the remote control.
MENU
Press to see an on-screen menu of your TV’s features.
In case of DTV mode, the DTV menu appears.
Press to decrease or increase the volume.
In the on-screen menu, use the
buttons as you
use the  and  buttons on the remote control.
Press to change channels. In the on-screen menu, use the
buttons as you
use the  and  buttons on the remote control.
(Without the Remote Control, you can turn on the TV by
using the Channel buttons.)
Speakers
Remote Control Sensor
Aim the remote control towards this spot on the TV.
(Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights up in stand-by mode.
English-
BN68-01007K-00Eng.indd 3
2006-07-05 �� 4:55:43
Viewing the Connection Panel
[Side Panel Jacks]
[Rear Panel Jacks]
(32 inch, 37 inch, 40 inch)
(27 inch model does not have the side panel jacks.)
Power Input
[Rear Panel Jacks]
(27 inch)
Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable.
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
-An outdoor aerial / A cable television network / A satellite network
English-
BN68-01007K-00Eng.indd 4
2006-07-05 �� 4:55:44
Connecting HDMI/DVI
-Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs).
-No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the "R - AUDIO - L" terminal on DVI for sound output.
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture distortion, image breakup or no picture. Supported modes for DVI or HDMI
480i
480p
576i
576p
720p
1080i
50 Hz
X
O
X
O
O
O
60 Hz
X
O
X
X
O
O
Component
O
O
O
O
O
O
- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen being displayed)
Connecting Set-Top Box, VCR or DVD
Connector
Video
Input
Audio (L/R)
Output
Video + Audio (L/R)
Only TV or DTV output is available.
Output you can choose.
RGB
EXT 1
EXT 2
- Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
Connecting External A/V Devices
-Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
-Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.
-Headphone may be connected to the headphone output ( ) on the rear of your set. While the headphone is connected, the sound from the built-in speakers will be disabled.
SERVICE
-Service connection for qualified service engineer.
Connecting AUDIO
-Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theater.
Connecting Computer
-Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer. -Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer.
Connecting Component Devices (DTV/DVD)
-Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.
-If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set.
-The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
-Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place. - If you want to use a locking device, contact the dealer where you purchased the TV. - The place of the Kensington Lock may be different depending on its model.
DIGITAL AUDIO OUT (OPTICAL)
- Connect to a Digital Audio Component.
Connecting CI (Common Interface) CARD
TV Rear Panel
- When not inserting "CI CARD" in some channels,
"Scrambled Signal" is displayed on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID, and other information will be displayed
Please insert in about 2~3 minutes. If an error message is displayed, the card as
please contact your service provider.
shown
- When the channel information configuration has finished, CI CARD
the message "Updating Completed" is displayed, indicating that the channel list is now updated.
Y
ou must obtain a CI CARD from a local cable service provider.
Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.
Service Port
- Service connection for qualified service engineer.
English-
BN68-01007K-00Eng.indd 5
2006-07-05 �� 4:55:45
Viewing the Remote Control
Selects
a target device to be controlled by the Samsung remote control
(TV, DVD, STB, CABLE, VCR)
(Refer to page 31~35)
Television Standby button
Number buttons for direct channel access
One/Two-digit channel selection
display "Channel Manager" It
on the screen.
Automatic Power-off
P : Next channel
P : Previous channel
Exit the OSD
Control the cursor in the menu
U
se to see information on the current broadcast
Picture size selection
Digital subtitle display
Selects the TV and DTV mode directly
Sound mode selection
VCR/DVD Functions
Rewind, Stop, Play/Pause, Fast/Forward
SRS TSXT selection
Volume increase
Volume decrease
T
emporary sound switch-off
Menu display and change confirmation
Electronic Program Guide (EPG) display
Picture-In-Picture On / Off
Picture freeze
Picture effect selection
hen your remote does not work, change
W
the batteries and press the “RESET” button
for 2-3 seconds before use.
Teletext Functions
Exit
from the teletext display
Teletext index
Teletext hold
Teletext size selection
Teletext mode selection (LIST/FLOF)
Teletext sub page
ound effect selection
S
: Teletext next page
P
P : Teletext previous page
Adjusts 5 separate devices - TV, DVD,
STB, CABLE, or VCR.
Teletext cancel
vailable source selection
A
Previous channel
DTV menu display
Teletext reveal
Alternately select Teletext, Double, or Mix.
Fastext topic selection
Teletext store
T
he performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired, and has Braille points on the
Power, Channel and Volume buttons.
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
M
ake sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3. R
eplace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
English-
BN68-01007K-00Eng.indd 6
2006-07-05 �� 4:55:47
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set.
You also can press the POWER
button or the TV/DTV button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3. P
ress the numeric button (0~9) or channel up/down ( / ) button on the remote control or button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4. To switch your set off, press the POWER
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when
you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER
button on the remote control.
The
screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER
, numeric buttons (0~9), TV/DTV button or channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial. Plug & Play
When the TV is initially powered on, several basic settings proceed automatically
and subsequently. The following settings are available.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the  or  button.
Press the ENTER button to confirm your choice.
3. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER button.
Please check that the antenna cable is connected correctly.
4. Select the appropriate country by pressing the  or  button.
Press the ENTER button to confirm your choice.
5. T
he "Auto Store" menu is displayed with the "Start" selected. Press the ENTER
button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears. button at any time to interrupt the memorization process.
Press the ENTER
6. P
ress the ENTER button.
Select the "Hour" or "Minute" by pressing the  or  button.
Set the "Hour" or "Minute" by pressing the  or  button.
You can also set the hour and minute by pressing the number buttons on the remote control.
7. P
ress the ENTER button to confirm your setting. The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV.
For detailed descriptions about DTV channel update, refer to page 19 of this manual.
 Language: Select your language.
 Country: Select your country.
 Auto Store: A
utomatically scans for and stores channels available in the local area.
 Clock Set: Sets the current time for the TV clock.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the  or  button to select "Setup", then press the ENTER
2. Press the ENTER
button.
button again, to select "Plug & Play".
3. The message to "Start Plug & Play" is displayed.
English-
BN68-01007K-00Eng.indd 7
2006-07-05 �� 4:55:48
- Storing Channels Automatically
- Storing Channels Manually
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme numbers.
However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER
2. Press the ENTER
button.
button to select "Country".
3. Select the appropriate country by pressing the  or  button. Press the ENTER
4. Press the  or  button to select "Auto Store", then press the ENTER
5. P
ress the ENTER
button to confirm your choice.
button.
button.
The TV will begin memorizing all of the available channels.
Press the ENTER
button at any time to interrupt the memorization process and return to the "Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears.
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER
button.
2. Press the  or  button to select "Manual Store", then press the ENTER
3. Press the ENTER
button.
button to select "Programme".
4. To assign a programme number to a channel, find the correct number by pressing the  or  button and then press the ENTER button.
You can also set a programme number by pressing number buttons on the remote control.
5. Press the  or  button to select "Colour System", then press the ENTER
button.
6. Select the colour standard required by pressing the  or  button then, press the ENTER
7. Press the  or  button to select "Sound System", then press the ENTER
8. Select the sound standard required by pressing the  or  button, then press the ENTER
button.
button.
If there is an abnormal sound or no sound, re-select the sound system required.
button.
9. If you know the number of the channel to be stored, press the  or  button to select "Channel". Press the ENTER
Select C (Air channel) or S (Cable channel) by pressing the  or  button. Press the  button to select channel. Select the required number by pressing the  or  button and then press the ENTER button.
button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10.If you do not know the channel numbers, press the  or  button to select "Search". Press the ENTER button. Search by pressing the  or  button and then press the ENTER
11.Press the  or  button to select "Store". Press the ENTER
button.
button to select "OK".
12.Repeat steps 3 to 11 for each channel to be stored.
 Programme: Selects a program number for the channel.
 Colour System: Sets the colour supporting system.
 Sound System: Sets the sound supporting system.
 Channel: Selects a channel.  Search: Scans for the frequency value for the channel.
 Store: Saves your settings.
English-
BN68-01007K-00Eng.indd 8
2006-07-05 �� 4:55:49
Setting the Channel Manager
Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.
1.
Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER
2.
Press the  or  button to select "Channel Manager", then press the ENTER
button.
3.
Press the ENTER
4.
Press the  button to select "
5.
Press the  or  button to select the undesired channel, then press the ENTER
button to cancel.
6.
Repeat steps 5 for each channel to be selected or canceled
7.
button again, to select "Channel Manager".
".
Press the EXIT button to exit.
"
button.
" is active when "Child Lock" is selected to "On".
You can select these options by simply
pressing the CH MGR button on the
remote control.
Activating the Child Lock
This feature allows you to prevent unauthorized users, such as children, from
watching unsuitable programmes by muting out video and audio.
Child Lock cannot be released using the buttons on the side.
Only the remote control can release the Child Lock setting, so keep the remote
control away from children.
1. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER button.
2. Press the  or  button to select "Channel Manager", then press the ENTER button.
3. Press the  or  button to select "Child Lock", then press the ENTER
4. Press the  or  button to select "On" or "Off". Press the ENTER
button.
button.
5. Press the  or  button to select "Channel Manager", then press the ENTER button.
6. Press the  button to select " " line.
7. Press the  or  button to select the channels you want to lock, then press the ENTER button.
8. Repeat steps 7 for each channel to be locked or unlocked.
9. Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active or inactive.
English-
BN68-01007K-00Eng.indd 9
2006-07-05 �� 4:55:50
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been automatically stored.
G
ive easily remembered numbers to the channels that you watch most often.
1. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER button.
2. Press the  or  button to select "Sort", then press the ENTER
button.
3. Select the channel number that you wish to change by pressing the
 or  button repeatedly. Press the ENTER button.
The selected channel number and name are moved to right side.
4. P
ress the  or  button to move to the position in which you would like to change and
then press the ENTER button.
The selected channel is exchanged with the one previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
6. Press the EXIT button to exit.
Assigning Channels Names
Channel names will be assigned automatically when channel information is broadcast.
These names can be changed, allowing you to assign new names.
1. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER button.
2. Press the  or  button to select "Name", then press the ENTER
button.
3. If necessary, select the channel to be assigned to a new name by pressing the  or  button. Press the ENTER button.
The selection bar is displayed around the name box.
4. To...
Then...
Select a letter, number or symbol
Press the  or  button
Move on the next letter
Press the  button
Move back the previous letter
Press the  button
Confirm the name
Press the ENTER
button
he characters available are :
T
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for optimal reception.
1. Use the number buttons to directly select the channel that you want to fine tune.
2. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER
3. Press the  or  button to select "Fine Tune", then press the ENTER
button.
button.
4. Press the  or  button to adjust the fine tuning. Press the ENTER button.
5. Press the EXIT button to exit.
ine tuned channels that have been saved are marked with an asterisk "*" on the F
right-hand side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select "Reset" by pressing the  or  button and then press the ENTER �������
button.
English-10
BN68-01007K-00Eng.indd 10
2006-07-05 �� 4:55:50
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, the LNA function can improve the reception
(a low-noise preamplifier boosts the incoming signal).
1. Press the MENU button to display the menu. Press the  or  button to select "Channel", then press the ENTER
2. Press the  or  button to select "LNA", then press the ENTER
button.
button.
3. Press the  or  button to select "On" or "Off". Press the ENTER
button.
4. Press the EXIT button to exit.
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu. Press the  or  button to select "Picture", then press the ENTER
2. Press the ENTER
Press the ENTER
button.
button again, to select "Mode".
button again.
3. P
ress the  or  button to select the desired picture effect. Press the ENTER
button.
4. Press the EXIT button to exit.
 Dynamic: Selects the picture for high-definition in a bright room.
 Standard: Selects the picture for optimum display in a normal environment.
 Movie: Selects the picture for comfortable display in a dark room.
 Custom: S
elect to view your favorite display settings. (Refer to "Adjusting the Custom Picture")
ou can also press the P.MODE
Y
button on the remote control to
select one of the picture settings.
The Picture mode must be adjusted separately for each input source.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 12)
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3.
2. Press the  or  button to select a particular item. Press the ENTER
button.
3. Press the  or  button to decrease or increase the value of a particular item. Press the ENTER button.
4. Press the EXIT button to exit.
 Contrast: Adjusts the lightness and darkness between objects and the background.
 Brightness: Adjusts the brightness of the whole screen.
 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
 Colour: Adjusts the colours, making them lighter or darker.
 Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted.
Changing the Colour Tone
You can select the most comfortable colour tone to your eyes.
1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3.
2. Press the  or  button to select "Colour Tone", then press the ENTER
button.
3. Press the  or  button to select the desired colour tone setting.
Press the ENTER button.
4. Press the EXIT button to exit.
 Cool2:Makes the colour temperature bluer than "Cool1" menu.  Warm1: Makes whites reddish.
 Cool1: Makes whites bluish.
 Warm2: Makes the colour temperature redder than
 Normal:Keeps whites white.
"Warm1" menu.
The adjusted values are stored according to the selected Picture mode.
English-11
BN68-01007K-00Eng.indd 11
2006-07-05 �� 4:55:51
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3 on page 11.
2. Press the  or  button to select "Reset", then press the ENTER
button.
3. Press the EXIT button to exit.
The "Reset" will be set for each picture mode.
Changing the Picture Size
You can select the picture size which best corresponds to your
viewing requirements.
1.
Press the MENU button to display the menu. Press the  or  button to select "Picture", then press the ENTER
2.
Press the  or  button to select "Size", then press the ENTER
3.
Select the required option by pressing the  or  button.
Press the ENTER
button.
4.
Press the EXIT button to exit.
button.
button.
 Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
 Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
 4:3: This is the default setting for a video movie or normal broadcasting.
You can select these options by
simply pressing the P.SIZE button
on the remote control.
“Auto Wide” function is available only in “TV”, “Ext1”, “Ext2”, “AV”, and “S-Video” mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Select by pressing the  or  buttons. Use the  or  button to move the picture up and down. After selecting , use the  or  button to magnify or reduce the picture size in the vertical direction.
Freezing the Current Picture
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the
screen.
1. Press the MENU button to display the menu. Press the  or  button to select "Picture", then press the ENTER
button.
2. Press the  or  button to select "Digital NR", then press the ENTER
3. Press the  or  button to select "On" or "Off". Press the ENTER
button.
button.
4. Press the EXIT button to exit.
English-12
BN68-01007K-00Eng.indd 12
2006-07-05 �� 4:55:52
DNIe Demo (Digital Natural Image engine)
Samsung’s new technology brings you more detailed images with contrast and white
enhancement. A new image compensation algorithm gives viewers brighter and
clearer images. DNIe technology will match every signal to your eyes.
You can see how DNIe improves the picture by setting DNIe Demo mode to On.
1. Press the MENU button to display the menu. Press the  or  button to select "Picture", then press the ENTER
button.
2. Press the  or  button to select "DNIe Demo", then press the ENTER
3. Press the  or  button to select "On" or "Off". Press the ENTER
button.
button.
4. Press the EXIT button to exit.
These functions don’t work in PC mode.
The DNle Demo is designed to show the difference between the regular and DNIe pictures.
By default, the product displays the picture with DNle applied.
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set programme or video
input. In this way, you can watch the picture of set programme or video input from
any connected equipment while watching the main picture.
Press the PIP button on the remote
control repeatedly to activate or
deactivate the "PIP".
1.
Press the MENU button to display the menu. Press the  or  button to select "Picture", then press the ENTER
2.
Press the  or  button to select "PIP", then press the ENTER
3.
Press the ENTER
button again. Press the  or  button to select "On", then press ENTER
4.
Press the  or  button to select "Source",then press ENTER
button. Select a source of the sub picture by pressing the  or  button and press the ENTER
button.
button.
button.
button.
If the PIP is activated, the size of the main picture turns to “16:9”.
he sub picture can serve different source selections based on what the main T
picture is set to.
5.
Press the  or  button to select "Swap".
To interchange the main picture and the sub picture, select "Swap" option and press the ENTER
button.
The main picture and the sub picture are interchanged.
If main picture is in "PC" mode, "Swap" is not available.
6. P
ress the  or  button to select "Size" of the sub picture and then press the ENTER button. Select a size of the sub picture by pressing the  or  button and then press the ENTER button.
If main picture is in "PC" mode, "Size" is not available.
7. Press the  or  button to select "Position", then press the ENTER button. Select the position of the sub picture by pressing the  or  button and then press the ENTER button.
8. P
ress the  or  button to select "Programme" and then press the ENTER button.
You can select the channel that you want to view through sub picture by pressing the  or  button. Press the ENTER button.
The "Programme" can be active when the sub picture is set to TV.
9. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the main
screen to view a game or karaoke.
 Source: Used to select a source of the sub picture.
 Swap: Used to interchange the main picture and the sub picture.
 Size: Used to select a size of the sub picture.
 Position: Used to move the sub picture.
 Programme: Used to Change the sub picture.
English-13
BN68-01007K-00Eng.indd 13
2006-07-05 �� 4:55:53
PIP Settings
O: PIP operates, X: PIP doesn’t operate
Main
Sub
TV
Ext.1
Ext.2
AV
S-Video
Component
PC
HDMI
DTV
TV
X
X
X
X
X
X
O
O
X
Ext.1
X
X
X
X
X
X
O
O
X
Ext.2
X
X
X
X
X
X
O
O
X
AV
X
X
X
X
X
X
O
O
X
S-Video
X
X
X
X
X
X
X
O
X
Component
X
X
X
X
X
X
X
O
X
PC
X
X
X
X
X
X
X
X
X
HDMI
O
O
O
O
O
O
X
X
X
DTV
X
X
X
X
X
X
X
X
X
Changing the Sound Standard
You can select the type of the special sound effect to be used when watching
a given broadcast.
1.
Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER
button.
2.
Press the ENTER
3.
Select the required sound effect by pressing the  or  button repeatedly and then
press the ENTER
button.
4.
Press the EXIT button to exit.
button again, to select "Mode".
 Standard: Selects the normal sound mode.
 Music: Emphasizes music over voices.
 Movie: Provides live and full sound for movies.
 Speech: Emphasizes voices over other sounds.
 Custom: S
elects your custom sound settings. (Refer to "Adjusting the Sound Settings")
ou can also select these options
Y
by simply pressing the S.MODE
button on the remote control.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
1. Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER
button.
2. Press the  or  button to select "Equalizer", then press the ENTER
button.
3. P
ress the  or  button to select a particular item.
Press the ENTER button.
4. Press the  or  button to reach the required setting. Press the ENTER button.
5. Press the EXIT button to exit.
If you make any changes to these settings, the Sound Mode is automatically switched to "Custom".
Connecting Hheadphones
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port, you can operate only
“Internal Mute” and “Sound Select” (in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
English-14
BN68-01007K-00Eng.indd 14
2006-07-05 �� 4:55:54
Setting the TruSurround XT (SRS TSXT)
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1
multichannel content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience through any twospeaker playback system, including internal television speakers. It is fully compatible with
all multichannel formats.
1. Press the MENU button to display the menu. Press the  or  button to select “Sound”, then press the ENTER button.
2. Press the  or  button to select “SRS TSXT”, then press the
ENTER
button.
3. Press the  or  button to select “On” or “Off”. Press the ENTER
button.
4. Press the EXIT button to exit.
symbol are trademarks of TruSurround XT, SRS and
SRS Labs, Inc. TruSurround XT technology is incorporated under
license from SRS Labs, Inc.
ou can also set these options
Y
simply by pressing the SRS button
on remote control.
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it is not easy for you
to adjust the volume every time the channel is changed. This feature allows you to
automatically adjust the volume of the desired channel by lowering the sound
output when the modulation signal is high or by raising the sound output when the
modulation signal is low.
1. Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER
button.
2. Press the  or  button to select "Auto Volume", then press the ENTER
3. Press the  or  button to select "On" or "Off". Press the ENTER
button.
button.
4. Press the EXIT button to exit.
Selecting the Internal Mute
If you want to hear the sound through separate speakers, cancel the internal amplifier.
1. Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER
button.
2. Press the  or  button to select "Internal Mute", then press the ENTER
3. Press the  or  button to select "On" or "Off". Press the ENTER
button.
button.
4. Press the EXIT button to exit.
When
"Internal Mute" is set to "On’, the Sound menus except for "Sound Select" (in PIP mode) cannot be adjusted.
Listening to the Sound of the Sub Picture
During the PIP features activation, you can listen to the sound of the sub picture.
1. Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER
button.
2. Press the  or  button to select "Sound Select", then press the ENTER
3. Press the  or  button to select "Sub". Press the ENTER
button.
button.
4. Press the EXIT button to exit.
 Main: Used to listen to the sound of the main picture.
 Sub: Used to listen to the sound of the sub picture.
You can select this option when the "PIP" is set to "On". (refer to page 13)
English-15
BN68-01007K-00Eng.indd 15
2006-07-05 �� 4:55:55
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset
function after setting the equalizer resets the equalizer setting to the factory defaults.
1. Press the MENU button to display the menu. Press the  or  button to select "Sound", then press the ENTER
button.
2. Press the  or  button to select "Reset", then press the ENTER
button.
3. Press the EXIT button to exit.
You can select this option when the "Game Mode” is set to "On".
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is displayed when you press the
INFO button. You must also set the time if you wish to use the
automatic On/Off timers.
1.
Press the MENU button to display the menu. Press the  or  button to select "Setup", then press the ENTER
2.
Press the  or  button to select "Time", then press the ENTER
3.
Press the ENTER
4.
5.
button to select "Clock Set".
To...
Press the...
Move to "Hour" or "Minute"
 or  button.
Set the "Hour" or "Minute"
 or  button.
Press the ENTER
button.
button.
button.
Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
Y
ou can also set hour and minute by pressing the number buttons on the remote control.
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after which the
television automatically switches to standby mode.
Press the SLEEP button on the
1.
Press the MENU button to display the menu. Press the  or  button to select "Setup", then press the ENTER
2.
Press the  or  button to select "Time", then press the ENTER
3.
Press the  or  button to select "Sleep Timer", then press the ENTER
4.
Press the  or  button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180). Press the ENTER
button.
5.
Press the EXIT button to exit.
button.
button.
button.
The TV automatically switches to standby mode when the timer reaches 0.
remote control repeatedly until the
appropriate time interval appears.
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice at the time you select.
Switch off automatically at the time you select.
The first step is to set the television’s clock.
1. Press the MENU button to display the menu. Press the  or  button to select "Setup", then press the ENTER button.
2. Press the  or  button to select "Time", then press the ENTER
button.
3. Press the  or  button to select "On Timer", then press the ENTER
button.
English-16
BN68-01007K-00Eng.indd 16
2006-07-05 �� 4:55:56
4. Press the  or  button to adjust "Hour", then press the  button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return.
5. Press the  or  button to select "Off Timer", then press the ENTER
button.
6. Press the  or  button to adjust "Hour", then press the  button to move to the next step. Set other items using the same method as above. When finished, press the ENTER button to return.
7. Press the EXIT button to exit.
You can also set hour and minute by pressing the number buttons on the remote control.
The "Activation" setting must be set to "Yes" in order for the timers to work.
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1.
Press the MENU button to display the on-screen menu.
Press the  or  button to select "Setup", then press the ENTER
button.
2.
Press the  or  button to select "Language", then press the ENTER
3.
Select a particular language by pressing the  or  button repeatedly.
Press the ENTER
button.
4.
Press the EXIT button to exit.
button.
You can choose one of 5 languages.
Using Game Mode
When connecting to a game console such as PlayStationTM or XboxTM,
you can enjoy a more realistic gaming experience by selecting game menu.
1. Press the MENU button to display the menu. Press the  or  button to select “Setup”, then press the ENTER
button.
2. Press the  or  button to select “Game Mode”, then press the ENTER
3. Press the  or  button to select “On” or “Off”. Press the ENTER
button.
button.
4. Press the EXIT button to exit.
To disconnect the game console and connect another external device, cancel game mode in the picture menu.
If you display the TV menu in Game mode, the screen shakes slightly.
Game Mode is not available in TV mode.
If Game Mode is On:
• Picture Mode and Sound Mode are automatically changed to Custom and users cannot change the mode.
• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer
resets the equalizer setting to the factory defaults.
Setting the Blue Screen Mode / Selecting the Melody
Blue Screen:
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background. If you wish to continue viewing the poor
picture, you must set the "Blue Screen" mode to "Off".
Melody:
You can hear melody sound when the television is powered on or off.
1. Press the MENU button to display the menu. Press the  or  button to select "Setup", then press the ENTER
button.
2. Press the  or  button to select "Blue Screen" or "Melody". Press the ENTER button.
3. Press the  or  button to select "On" or "Off". Press the ENTER button.
4. Press the EXIT button to exit.
English-17
BN68-01007K-00Eng.indd 17
2006-07-05 �� 4:55:57
Using the Energy Saving Feature
This function adjusts the brightness of the TV so as to reduce power consumption.
When you watching TV at night, set the "Energy Saving " mode option to "High" so
as to reduce the dazzling of your eyes as well as the power consumption.
1. Press the MENU button to display the on-screen menu.
Press the  or  button to select "Setup", then press the ENTER
button.
2. Press the  or  button to select "Energy Saving", then press the ENTER
button.
3. Select the required option (Off, Low, Medium, High) by pressing the  or  button.
Press the ENTER button.
4. Press the EXIT button to exit.
Selecting the Source
You can select among external sources connected to your TV’s input jacks.
1.
Press the MENU button to display the menu.
Press the ENTER
button, to select "Input".
2.
Press the ENTER
3.
button again, to select "Source List".
hen no external device is connected to your set, only "TV", "Ext.1", "Ext.2" are W
activated in the "Source List". "AV", "S-Video", "Component", "PC", "HDMI", "DTV" are
activated only when they are connected to your set.
Select the required device by pressing the  or  button. Press the ENTER
button.
Press
the SOURCE button on the remote control to toggel between all the available source. TV mode can be selected by pressing the TV/DTV button, number buttons(0~9), and the
P / button on the remote control. But it cannot be selected using the SOURCE button. Editing the Input Source Names
Name the device connected to the input jacks to make your input source
selection easier.
1. Press the MENU button to display the menu. Press the ENTER button, to select "Input".
2. Press the  or  button to select "Edit Name", then press the ENTER
button.
3. Press the  or  button to select the device that you wish to edit. Press the ENTER button.
4. Press the  or  button to select the required device.
Press the ENTER button.
5. Press the EXIT button to exit.
English-18
BN68-01007K-00Eng.indd 18
2006-07-05 �� 4:55:58
Previewing the DTV Menu System
To help you navigate around the on-screen menu system and adjust the
various settings available, refer to the following illustration.
Available in the Digital TV mode.
Press the D.MENU button.
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Now/Next, Full Guide
Preference
Preferred Subtitle Language
Preferred Audio Language
OSD Language
Translucency Level
Parental Lock
English, Welsh, Gaelic, Irish
English, Welsh, Gaelic, Irish
English, Deutsch, Italiano, Français, Svenska
High, Medium, Low, Opaque
Parental Rating Change PIN
Feature
Subtitle
Subtitle Language
Audio Language
Digital Text
On, Off
Disable, Enable
Channel
Auto Store
Manual Store
Edit Favourite Channels
Channel Manager
System
Product Information
Signal Information
Software Upgrade
Common Interface
Reset
Application Info
CI Menu
Module Information
Smart card information
Language
Software Download
The sub-items of the CI Menu may vary depending on the CAM model.
You can select these options by simply
pressing the D.MENU button on the
remote control.
Updating the Channel List Automatically
You can update the channel list when the broadcaster adds new Services or if
you move the TV to a new location.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Channel", then press the ENTER
3.
Press the ENTER
4.
When it has finished, the number of scanned services will be displayed.
5.
button.
button again, to select "Auto Store".
The existing favourite channel list will not be deleted when the channel list is updated.
To stop the scan before it has finished, press the ENTER
button with "STOP" selected.
Press the EXIT button to exit.
If the signal status is poor, the “No Service found! Check the aerial connection” message is displayed.
English-19
BN68-01007K-00Eng.indd 19
2006-07-05 �� 4:56:00
Updating the Channel List Manually
You can specify the channel or frequency for a fast channel search.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Channel", then press the ENTER
3.
Press the  or  button to select "Manual Store", then press the ENTER
4.
To...
 or  button
Set the "Channel", or "Bandwidth"
 or  button
Set the "Frequency"
Numeric button (0~9)
• Channel: Channel “21” to “68” in sequence are displayed in UK.
• Frequency: The frequency available in the Channel group is displayed.
• Bandwidth: The available bandwidths are 7 and 8 MHz.
5.
Press the red button to start the scan for digital services.
When it has finished,channels are updated in the channel list.
6.
Press the EXIT button to exit.
button.
Then...
Move to "Channel", "Frequency", or "Bandwidth"
button.
You can input by pressing the button on the remote control.
You can not change only Frequency and when changing a channel, the Frequency will be automatically changed.
Editing Your Favourite Channels
You can edit your favourite channels using the four colour buttons.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Channel", then press the ENTER
3.
Press the  or  button to select "Edit Favourite Channels", then press the ENTER
button.
4.
Press the red button to display all currently stored channels.
5.
Press the  or  button to select a channel you want. Press the ENTER
button.
A "★" icon is shown next to the selected channel and the channel will be added to the favourite channel list. button again.
• To undo, press the ENTER
• Select All: Select all channels currently displayed.
• Select None: Deselect all selected channels.
• Preview: Displays (a) currently selected channel(s).
The Favorite Channels settings have been completed.
6.
Press the EXIT button to exit.
button.
Add
You can use this function when one or more favourite channels have been selected.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Channel", then press the ENTER
3.
Press the  or  button to select "Edit Favourite Channels", then press the ENTER
button.
4.
Press the red button in the "Edit Favourite Channels" menu.
To add more channels, refer to the step 5 on the previous description.
5.
If you want to check the channel to be stored, press D.MENU button. button.
Press the EXIT button to exit.
• ������������������������������������������������������������������������
��������������������������������������������������������������������������
To add all channels to the favourite channel list, press the red button.
�������������������������������������������������
• �����������������������������������������������
To remove all channels, press the green button.
��• Preview : Displays (a) currently selected channel(s).
������������
• ����������
Press the CH MGR button to display the favourite channel manager.
English-20
BN68-01007K-00Eng.indd 20
2006-07-05 �� 4:56:01
Move
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Channel", then press the ENTER
3.
Press the  or  button to select "Edit Favourite Channels", then press the ENTER
button.
4.
Select the required channel using the  or  button.
5.
Press the green button.
button.
A " " icon is displayed on the left side of the channel name.
6.
Press the  or  button to select the channel that you want to move, and press the green or ENTER
button.
7.
Press the EXIT button to exit.
Preview
1.
In the "Edit Favourite Channels" menu, select the channel to be previewed by pressing the  or  button.
2.
Press the yellow button.
The selected channel is displayed on the screen.
Delete
1.
In the "Edit Favourite Channels" menu, select the channel to be deleted from the favourite channels list by pressing the  or  button.
2.
Press the blue button.
The selected channel and number will be deleted.
To add a deleted channel back in to the favourite channel list, see "Add" on page 20.
Selecting Channel Manager
You can exclude the channels you have chosen from the channels you have scanned.
When you scan through the stored channels, those you have chosen to skip are not
displayed. All channels that you do not specifically choose to skip are displayed
during scanning.
You can select these options by
simply pressing the CH MGR button
on the remote control.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Channel", then press the ENTER
3.
Press the  or  button to select "Channel Manager". Press the ENTER
4.
Press the yellow button to toggle between your favourite channels and all channels.
5.
Press the red or green button to display the previous or next channel manager page.
6.
Press the  or  button to select a channel to be tuned. Press the ENTER
button.
7.
button.
button.
Your favourite channels are only displayed if they were previously set in the " Editing Your Favourite Channels" menu (refer to page 20~21).
The channel number, name and an icon are displayed in the top left corner while changing
the channel. The channel number and name are displayed if the channel is one of the all
channels, and a icon if the channel is one of the favourite channels.
Press the blue or CH MGR button to exit from the channel manager.
English-21
BN68-01007K-00Eng.indd 21
2006-07-05 �� 4:56:03
Displaying Programme Information
While viewing a channel, additional information about the current programme may be
displayed.
1.
2.
While viewing a programme, press the INFO (
) button.
The programme information is displayed.
To exit from banner information, press the INFO (
) button.
Viewing the EPG (Electronic Programme Guide) Information
The EPG (Electronic Programme Guide) information is provided by the
broadcasters. Programme entries may appear blank or out of date as a result of the
information broadcast on a given channel. The display will dynamically update as
soon as new information becomes available.
ow & Next Guide
N
For the six channels indicated in the left-hand column, displays the Current
programme and the Next programme information.
ull Guide
F
Displays the programme information as time ordered One hour segments.
Two hours of programme information is displayed which may be scrolled
forwards or backwards in time.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the ENTER
3.
Press the  or  button to select "Now & Next Guide" or "Full Guide". Press the ENTER
button.
4.
button, to select "Guide".
You can also display the guide menu simply by pressing the GUIDE button.
To...
Then...
Watch a programme in the EPG list
• Select a programme by pressing the 5, 6, 3, 4 button.
• Press the ENTER
button.
If the next program is selected, it is scheduled with the clock icon displayed. If the ENTER
button is pressed again, the scheduling is canceled with the clock
icon gone. For details about scheduling programmes, refer to the next page.
View programme information
• Select a programme of your choice by pressing the 5, 6, 3, 4 button.
• Press the INFO (
) button when the programme of your choice is highlighted.
Toggle between the "Now & Next Guide" or "Full Guide"
• Press the red button repeatedly.
Display the "Favourites" and the "All
Channels" list
• Press the green button repeatedly.
Scrolls backwards quickly (2 hours).
• Press the yellow button repeatedly.
Scrolls forward quickly (2 hours).
• Press the blue button repeatedly.
Exit the guide
• Press the EXIT button.
The programme title is on the upper part of the screen center. Please click on INFO (
) button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information(HD/SD), Sound Modes, Subtitle or Teletext, Languages of Subtitle or Teletext, and brief summary of the highlighted programme are included on the detailed information. "..." will be appeared if the summary is long.
Six channels are displayed. To scroll between channels, move to a channel using the  or  button. To display page by page, use the P
or
button.
English-22
BN68-01007K-00Eng.indd 22
2006-07-05 �� 4:56:04
Using the Scheduled List
If you make a scheduled viewing list of programs you may like to see,
the channel will be automatically switched to the scheduled program at the
scheduled time even if you are watching another program.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the ENTER
3.
Press the  or  button to select "Scheduled List", then press the ENTER
4.
Press the red button.
The channel will be switched to the scheduled program.
5.
Press the ENTER
button, to select "Guide".
button to select an item and adjust with the 3 or 4 button .
You can also set hour and minute by pressing the number buttons on the remote control.
• Channel: Set the channel.
• Time: Set the time.
• Date: Set Year, Month and Day.
• Frequency: Set the frequency. ("Once", "Daily", or "Weekly")
6.
After setting the schedule, Press the red button.
7.
Press the EXIT button to exit.
button.
The Scheduled list may be displayed in the EPG menu.
• Save: Save the adjusted schedule.
• Cancle: Cancel the adjusted schedule.
• Add Programme: Add a new schedule.
• Edit: Re-adjust the selected schedule.
• Delete: Delete the selected schedule.
Setting the Default Guide
You can preset the default guide style.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the ENTER
3.
Press the  or  button to select "Default Guide", then press the ENTER
4.
Select "Now/Next" or "Full Guide" using the 5 or 6 button, and press the ENTER
button.
5.
Press the EXIT button to exit.
button, to select "Guide".
button.
ou can select these options Y
by simply pressing the GUIDE button on the remote control.
English-23
BN68-01007K-00Eng.indd 23
2006-07-05 �� 4:56:06
Viewing All Channels and Favourite Channels
In the EPG menu, you can display all channels or favourite channels.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the ENTER
3.
Select the your required guide ("Now & Next Guide" or "Full Guide") by pressing the  or  button.
4.
Press the ENTER
5.
Press the green button.
All the channel lists and the favorite channel lists will be toggled.
button again, to select "Guide".
button.
6.
Select a programme of your choice by pressing the , 6, 3, or 4 button.
7.
Press the INFO (
8.
When the Edit Favourite Channels list has not been set up:
��• "The favourites list is empty. Would you like to choose your favourites now?" message is displayed.
• Select “Yes”.
The "Edit Favourite Channels" menu is displayed.
If you select “No”, all channels will remain unchanged.
• ������������������������������������������������������������������
To edit the favourite channels, refer to page 20 for more details.
) button to display information about the highlighted programme.
9 . Press the EXIT button to exit.
"All Channels" is the list of channels that have been scanned by the channel list update. All channels are displayed in the all channel mode.
"Favourites" (favourite channels) is the list of channels that has been set in the "Edit Favourite Channels" menu (refer to page 20).
Setting the Preferred Languages
Using this feature, users can select one of the four languages
(English, Welsh, Gaelic, Irish). The language selected here is the
default when the user selects a channel.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Preference", then press the ENTER
3.
Press the  or  button to select "Preferred Subtitle Language" or "Preferred Audio Language". Press the ENTER
button.
4.
Select the required option by pressing the  or  button,and press the ENTER
button to change the setting.
• Preferred Subtitle Language: English, Welsh, Gaelic, Irish
• Preferred Audio Language: English, Welsh, Gaelic, Irish
5.
Press the EXIT button to exit.
button.
If you change the language setting, the "Subtitle Language" and the "Audio Language" of the features menu (refer to page 26) are automatically changed to the selected language.
The "Subtitle Language" and the "Audio Language" of the features menu show a list of languages supported by the current channel and the selection is highlighted. If you change this language setting,the new selection is only valid for the current channel.
The changed setting does not change the setting of the "Preferred Subtitle Language" or the "Preferred Audio Language" of the preference menu.
English-24
BN68-01007K-00Eng.indd 24
2006-07-05 �� 4:56:08
Choosing Your Language
When you start using your set for the first time, you must select the language which
will be used for displaying menus and indications.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Preference", then press the ENTER
button.
3.
Press the  or  button to select "OSD Language", then press the ENTER
button.
4.
Select a particular language by pressing the  or  button repeatedly.
Press the ENTER
button.
5.
Press the EXIT button to exit.
You can choose one of five languages.
Adjusting the Translucency Level
You can set the translucency of the menu.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Preference", then press the ENTER
3.
Press the  or  button to select "Translucency Level", then press the ENTER
button.
4.
Select the required option ("High", "Medium", "Low", or "Opaque") by pressing the  or  button, and press the ENTER
button to change the setting.
5.
Press the EXIT button to exit.
button.
Setting up the Parental Lock
This feature allows you to prevent unauthorized users, such as children, from
watching unsuitable programmes by a 4-digit PIN (Personal Identification Number)
code that is defined by the user. The on-screen menu will instruct you to assign a
PIN code (you can change it later, if necessary).
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Preference", then press the ENTER
3.
Press the  or  button to select "Parental Lock.", then press the ENTER
4.
The "Enter PIN" is displayed.
5.
Enter your current 4-digit PIN code by using the numeric buttons (0~9).
The options available in the "Parental Lock" group are displayed with the "Parental Rating" selected.
6.
Press the ENTER
7.
Press the  or  button to select the age rating you want to lock out.
Press the ENTER
button.
8.
If you want to change the PIN code,select "Change PIN" by pressing the  or  button. Press the ENTER
button.
9.
button.
button.
The default PIN code for a new TV set is 0000.
If you enter an invalid PIN code,the "Invalid PIN code. Please try again." message is displayed.
button.
The "Enter New PIN" is displayed.
Enter your new PIN code by using the numeric buttons (0~9).
The "Confirm New PIN" is displayed.
10. Re-enter your new PIN code to confirm by using the numeric buttons (0~9).
The Your PIN code has been changed successfully message is displayed.
11. Press the ENTER
button.
12. Press the EXIT button to exit.
If you forget the PIN code, press the remote control buttons in the following sequence, which
resets the PIN to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On).
English-25
BN68-01007K-00Eng.indd 25
2006-07-05 �� 4:56:09
Setting the Subtitle
You can activate and deactivate the subtitles.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Feature", then press the ENTER
3.
Press the ENTER
4.
Select "On" by pressing the  or  button. Press the ENTER
5.
Press the EXIT button to exit.
button.
button again, to select "Subtitle".
button.
Selecting the Preferred Language (Subtitle or Audio)
You can change the default value for subtitle and audio languages.
Displays the language information for the incoming stream.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Feature", then press the ENTER
3.
Press the  or  button to select "Subtitle Language" or "Audio Language". Press the ENTER
button.
4.
Select the required option by pressing the  or  button, and press the ENTER
button to change the setting.
5.
Press the EXIT button to exit.
button.
English is the default in cases where the selected language is unavailable in the broadcast.
While viewing a programme, the subtitle can be selected.
While viewing a programme, audio languages can be selected.
Setting the Digital Text
If the programme is broadcast with digital text, this feature is enabled.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "Feature", then press the ENTER
3.
Press the  or  button to select "Digital Text", then press the ENTER
4.
Select "Disable" or "Enable" by pressing the  or  button.
5.
Press the EXIT button to exit.
button.
button.
HEG(Multimedia and Hypermedia Information Coding Experts Group) An International M
standard for data encoding systems used in multimedia and hypermedia. This is at a higher level
than the MPEG system which includes data-linking hypermedia such as still images, character
service, animation, graphic and video files as well as multimedia data. MHEG is user runtime
interaction technology and is being applied to various fields including VOD (Video-On-Demand),
ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and network games.
English-26
BN68-01007K-00Eng.indd 26
2006-07-05 �� 4:56:10
Viewing Product Information
You can view your product information. For service or repair, please contact a
Samsung approved dealer.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "System", then press the ENTER
3.
Press the ENTER
4.
button.
button again, to select "Product Information".
The Product Information menu is selected.
- Software Version, Firmware Version
Press the EXIT button to exit.
Checking the Signal Information
You can get information about the signal status.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "System", then press the ENTER
3.
Press the  or  button to select "Signal Information", then press the ENTER
button.
4.
button.
Press the EXIT button to exit.
If the signal status is poor, the "No signal." message is displayed.
Upgrading the Software (Option)
To keep your product up-to-date with new Digital Television features then software
upgrades are periodically broadcast as part of the normal Television signal.
It will automatically detect these signals and display the software upgrade banner.
You are given the option to install the upgrade.
pgrade Now
U
If you select "Upgrade Now", the "iDTV" immediately installs the new upgrade and then
restarts.
pgrade Later
U
If you select "Upgrade Later", the upgrade is postponed until the next restart or channel
change some 90 minutes later, when the upgrade dialog appears again.
on’t Upgrade
D
If you select "Don’t Upgrade", the "iDTV" does not perform the upgrade and the
software upgrade banner is not displayed again.
The upgrade is still stored internally, to subsequently upgrade to the new version then
the following sequence of steps are performed.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "System", then press the ENTER
3.
Press the  or  button to select "Software Upgrade", then press the ENTER
button.
4.
To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
5.
Press the EXIT button to exit.
button.
English-27
BN68-01007K-00Eng.indd 27
2006-07-05 �� 4:56:11
Viewing Common Interface
This contains information on CAM inserted in the CI slot and displays it.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "System", then press the ENTER
3.
Press the  or  button to select "Common Interface", then press the ENTER
button.
4.
Press the ENTER
5.
button.
button to display the information for your application.
Press the EXIT button to exit.
The Application Info inserting is about the CI CARD.
You can install the CAM anytime whether the TV is ON or OFF.
1. Purchase the CI CAM module by visiting your nearest dealer or by phone.
2. Insert the CI CARD into the CAM in the direction of the arrow until it fits.
3. Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
4. Check if you can see a picture on a scrambled signal channel.
Selecting the CI (Common Interface) Menu
This enables the user to select from the CAM-provided menu.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "System", then press the ENTER
3.
Press the  or  button to select "Common Interface", then press the ENTER
button.
4.
Select to "CI Menu" by pressing the  or  button, and press the ENTER
5.
Select the required option by pressing the  or  button, and press the ENTER
button.
6.
Press the EXIT button to exit.
button.
button.
Select the CI Menu based on the menu PC Card.
Resetting
You can reset the values stored to the factory default values.
The Reset operation deletes all channel information and user preferences returning all values to their default factory state.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the  or  button to select "System", then press the ENTER
3.
Press the  or  button to select "Reset", then press the ENTER
4.
The "Enter PIN" screen will appear.
5.
Enter your current 4-digit PIN code by using the numeric buttons (0~9).
6.
Press the EXIT button to exit.
button.
button.
The warning message is displayed.All values will be reset by pressing the coloured buttons (red, green, yellow, and blue)in turn.
English-28
BN68-01007K-00Eng.indd 28
2006-07-05 �� 4:56:12
Teletext Decoder
Most set channels carry " teletext ", pages of written information that
provide information such as:
Television programme times.
N
ews bulletins and Weather forecasts.
S
ports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:
Contents
Part
A
Selected page number.
B
Broadcasting station identity.
C
Current page number or search status.
D
Date and time.
E
Text.
F
Status information.
Displaying the Teletext Information
You can display teletext information at any time, but signal reception must be good.
Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the teletext mode and display the contents page:
1.
Using the P
(
teletext service.
2.
Press the TTX/MIX (
) or P
(
) button, select the channel providing the ) button to activate the teletext mode.
he contents page is displayed. It can be redisplayed at any time by pressing the T
MENU (
) button.
3.
Press the TTX/MIX (
) button again.
he actual broadcast will be displayed with “Teletext”, “Double”, and “Mix” in order T
on the screen.
4.
Press the TV/DTV button to exit from the Text display.
If any broken character appears while Text is being viewed, make sure that the Text language is identical with the language in the "Setup" menu mode. If both languages are different, select the
same language with the Text language on the "Setup" menu.
English-29
BN68-01007K-00Eng.indd 29
2006-07-05 �� 4:56:13
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the page number directly:
1. Enter the three-digit page number listed in the contents by pressing the
corresponding numeric buttons.
2. If the selected page is linked with several secondary pages, the secondary pages
are displayed in sequence. To freeze the display on a given page, press the PIP ( ) . Press the PIP ( ) button again to resume.
3. Using the various display options:
To display...
Press the...
Both teletext information and the normal broadcast
TTX/MIX (
Hidden text (answers to quiz games, for example)
INFO (
)
The normal screen
INFO (
)
A secondary page, by entering its 4-digit number
PRE-CH (
The next page
The previous page
P
P
Double-size letters in the:
 Upper half of the screen  Lower half of the screen
P.MODE (
 Once  Twice
Normal screen
 Three times
(
(
)
)
)
)
)
Using Fastext to Select a Teletext Page
The various topics included in the teletext pages are colour-coded, and can be
selected by pressing the coloured buttons on the remote control.
1.
Display the teletext contents page by pressing the TTX/MIX (
2.
Press the coloured button corresponding to the topic that you wish to select (The
available topics are listed on the status information line).
3.
Press the Red button to display the previous page.
Press the Green button to display the next page.
4.
Press the TV/DTV button to exit from the Text display.
) button.
English-30
BN68-01007K-00Eng.indd 30
2006-07-05 �� 4:56:14
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five different
modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the
remote control allows you to switch between these modes, and control whichever
piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1. T
urn off your VCR. 2. Press the VCR button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4. U
sing the number buttons on your remote control, enter three digits of the VCR
code listed on page 33 of this manual for your brand of VCR. Make sure you enter
three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)
5. P
ress the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try one of
the other codes listed for your brand of VCR. If no other codes are listed, try each VCR code, 000 through 080.
ote on Using Remote Control Modes: VCR
N
When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.
Setting Up the Remote to Operate Your Cable Box
1. T
urn off your cable box.
2. Press the CABLE button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4. U
sing the number buttons on your remote control, enter three digits of the cable
box code listed on page 34 of this manual for your brand of cable box. Make sure
you enter three digits of the code, even if the first digit is a “0”. (If there is more
than one code listed, try the first one.)
5. P
ress the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps 2, 3, and 4, but try one
of the other codes listed for your brand of cable box. If no other codes are listed,
try each code, 000 through 046.
ote on Using Remote Control Modes: Cable Box
N
When your remote control is in “CABLE” mode, the volume buttons still control your TV’s
volume.
English-31
BN68-01007K-00Eng.indd 31
2006-07-05 �� 4:56:14
Setting Up the Remote to Operate Your DVD
1. T
urn off your DVD.
2. Press the DVD button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4. U
sing the number buttons on your remote control, enter three digits of the DVD
code listed on page 34~35 of this manual for your brand of DVD. Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5. P
ress the POWER button on the remote control. Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3, and 4, but try one of
the other codes listed for your brand of DVD.
If no other codes are list-ed, try each code, 000 through 141.
ote on Using Remote Control Modes: DVD
N
When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.
Setting Up the Remote to Operate Your STB
1. T
urn off your STB.
2. Press the STB button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4. U
sing the number buttons on your remote control, enter three digits of the STB
code listed on page 35 of this manual for your brand of STB. Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5. P
ress the POWER button on the remote control. Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of
the other codes listed for your brand of STB. (If no other codes are listed, try each code, 000 through 074.)
ote on Using Remote Control Modes: STB
N
When your remote control is in “STB” mode, the volume buttons still control your TV’s volume.
English-32
BN68-01007K-00Eng.indd 32
2006-07-05 �� 4:56:15
Remote Control Codes
VCR
Brand
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
JVC
KENWOOD
KLH
KONIA
LG(Goldstar)
LIOYD
LOGIK
LXI
MAGNAVOX
MARANTZ
MARTA
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
MITSUBISHI
Code
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034 040 047 050 052 060 063 065 066 067 069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041 054 056
007 008 018 021 026 037
081 082 083
007 008 018 021 026 037
070
036
006 007 008 009 010
025
038
025
021 056 059
007 008 018 021 026 037 062
006
021
006 021 024 025
034
005
019 041 075
019 034 041 046
Brand
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
ORION
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Code
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
073 074 075 076
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034 048 056
002 017 019 021 035 041 043 057 068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034 038 041
007 008 018 026 037
023 027 033
English-33
BN68-01007K-00Eng.indd 33
2006-07-05 �� 4:56:15
CABLE BOX
Brand
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Code
000 001 002 003 004 005 006 007
041
003 024 031
025 030
038 039
025 030
019 023 028
026
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
Brand
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH
Code
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
SAMSUNG DVD
Product
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Product
Home Theater VCR COMBO
HDD Recorder COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
AV Receiver
Code
030
075
085
072
070 071 074 086 083 084 088 111 112
114
062
074
122 123
027
077 078 079 082
080 125
081
065
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
Brand
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
Code
014 015 016
017
018
019
020
021
DVD
Brand
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CYBER HOME
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
Code
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
English-34
BN68-01007K-00Eng.indd 34
2006-07-05 �� 4:56:16
DVD
Brand
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
Code
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129 130 141
039 041
042
043 093
140
062
062 090
094
Brand
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
SAMSUNG SET-TOP BOX
Product
Ground wave STB
Satellite STB
CABLE STB
STB DVD COMBO
Satellite STB HDD COMBO Standard
Code
001 002
003
004
008
009
Product
Satellite STB HDD COMBO Premium
CABLE STB HDD COMBO Standard
CABLE STB HDD COMBO Premium
Ground wave STB HDD COMBO Standard
Ground wave STB HDD COMBO Premium
Code
010
011
012
013
014
SET-TOP BOX
Brand
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
LG(Goldstar)
Code
023
043
018 034
019
035
015 016 017 019 022 045 060 061 062 065 066 067 068
074
069 070
069
018 024 032
027
025 069 070 071
069
069
065
046 047 048 063 064
069
056
022
015 017
020
020
059
063
069 070
044 073
Brand
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STAR TRAK
STS
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Code
016 021 036 038 039 040 041 042
016
064
018
015
047 048 064
015 016 017 021 033 036 038 039 040 041 042 067
046 049 050 063
058 059 061 062
016
065 066
051 052 053 065 066
064
057
026
020 027
031
005 006 007
064
064
054 060
015 017 028 029 030 072
060 066
016 021 037 055 056 057
024 031 068
English-35
BN68-01007K-00Eng.indd 35
2006-07-05 �� 4:56:16
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be
different depending upon your particular version of Windows and your particular video card. Even if your actual
screens look different, the same, basic set-up information will apply in almost all cases.
(If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. W
hen the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear.
3. W
hen the control panel window appears, click on "Display" and a display dialog-box will appear.
4. N
avigate to the "Settings" tab on the display dialog-box. The correct size setting (resolution): Optimum- 1360 X 768
If a vertical-frequency option exists on your display settings dialog box, the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are supported)
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
640 x 480
720 x 400
31.469
31.469
59.940
70.087
25.175
28.322
- / -
-/+
VESA
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
37.861
37.500
37.879
48.077
46.875
48.364
56.476
60.023
47.712
72.809
75.000
60.317
72.188
75.000
60.000
70.069
75.029
60.015
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.800
- / -
- / -
+ /+
+ /+
+ /+
- / -
- / -
+ /+
+ /+
The interface mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
DVI does not support PC function.
Separate and Composite modes are supported. SOG is not supported.
English-36
BN68-01007K-00Eng.indd 36
2006-07-05 �� 4:56:17
Setting the PC
Coarse and Fine Tuning of the Image (Image Lock):
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust the frequency as best
as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust
the picture so that it is aligned on the center of screen.
1.
Preset: Press the SOURCE button to select PC mode.
2.
Press the MENU button to display the menu. Press the  or  button to select "Setup", then press the ENTER
3.
Press the  or  button to select "PC", then press the ENTER
4.
Press the ENTER
5.
Press the  or  button to select "Coarse" or "Fine", then press the ENTER
6.
Press the  or  button to adjust the screen quality. Press the ENTER
button.
7.
Press the EXIT button to exit.
button.
button.
button to select "Image Lock".
button.
Changing the Image Position (Position):
Adjust the PC’s screen positioning if it does not fit the TV screen.
1.
Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3.
2.
Press the  or  button to select "Position", then press the ENTER
3.
Press the  or  button to adjusting the Vertical-Position. Press the  or  button to adjust the Horizontal-Position. Press the ENTER
button.
4.
Press the EXIT button to exit.
button.
Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video
signal. The values of fine, coarse and position are adjusted automatically.
1.
Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3.
2.
Press the  or  button to select "Auto Adjustment", then press the ENTER
3.
Press the EXIT button to exit.
button.
Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default values.
1.
Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3.
2.
Press the  or  button to select "Image Reset", then press the ENTER
3.
Press the EXIT button to exit.
button.
English-37
BN68-01007K-00Eng.indd 37
2006-07-05 �� 4:56:17
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ from the illustration
depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.
1.Insert the locking device into the
Kensington slot on the LCD TV
(Figure 1), and turn it in the locking
direction (Figure 2).
Cable
Figure 2
2.Connect the Kensington lock cable.
3.Fix the Kensington lock to a desk
or a heavy stationary object.
Figure 1
<Optional>
The place of the Kensington Lock may be different depending on its model.
Troubleshooting: Before Contacting Service Personnel
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the POWER
buttons on the front of the set.
Check the picture contrast and brightness settings.
 Check the volume.
Normal picture but no sound
Check the volume.
 Check whether the MUTE button has been pressed on the remote control.
 Check if "Internal Mute" is off
No picture or black and white
picture
Adjust the colour settings.
 Check that the broadcast system selected is correct.
Sound and picture interference
 Try to identify the electrical appliance that is affecting the set and move it further away.
 Plug your set into a different mains socket.
Blurred or snowy picture, distorted sound
 Check the direction, location and connections of your aerial. This interference is often due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.  Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
"Check signal cable." message is displayed.
Check that the signal cable is firmly connected to the PC or video sources. Check that the PC or video sources are turned on.
On PC mode, "Not Supported
Mode." message is displayed.
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
The TFT LCD panel uses a panel consisting of sub pixels (3,133,440) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English-38
BN68-01007K-00Eng.indd 38
2006-07-05 �� 4:56:18
Technical and Environmental Specifications
Model Name
Screen Size (Diagonal)
PC Resolution
Input Signal
Sync.
Video Signal
LE27S7
LE32S7
LE37S7
LE40S7
27 inch
32 inch
37 inch
40 inch
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
TV
Colour System
Sound System
PAL, SECAM-B/G, D/K,
PAL, SECAM-B/G, D/K,
PAL, SECAM-B/G, D/K,
PAL, SECAM-B/G, D/K,
I, I/I, L/L’, NTPB (AV3.58, 4.43) I, I/I, L/L’, NTPB (AV3.58, 4.43) I, I/I, L/L’, NTPB (AV3.58, 4.43) I, I/I, L/L’, NTPB (AV3.58, 4.43)
BG, DK, I, L
BG, DK, I, L
BG, DK, I, L
BG, DK, I, L
DTV Signal Reception
UHF Cgannel
Demodulation
Channel 21~68 (474~850 MHz) Channel 21~68 (474~850 MHz) Channel 21~68 (474~850 MHz) Channel 21~68 (474~850 MHz)
Bandwidth 8 MHz
Bandwidth 8 MHz
Bandwidth 8 MHz
Bandwidth 8 MHz
DVB-T
DVB-T
DVB-T
DVB-T
MPEG2 DVB Compliant (Main Profile @ Main Level)
UP to 15 Mb/s
720 x 576 pixels
MPEG-2 Layer I & II
Mono/Stereo
MPEG2 DVB Compliant (Main Profile @ Main Level)
UP to 15 Mb/s
720 x 576 pixels
MPEG-2 Layer I & II
Mono/Stereo
MPEG2 DVB Compliant (Main Profile @ Main Level)
UP to 15 Mb/s
720 x 576 pixels
MPEG-2 Layer I & II
Mono/Stereo
MPEG2 DVB Compliant (Main Profile @ Main Level)
UP to 15 Mb/s
720 x 576 pixels
MPEG-2 Layer I & II
Mono/Stereo
Video
Colour System
Video System
PAL/NTSC/SECAM
CVBS, S-VHS, RGB
PAL/NTSC/SECAM
CVBS, S-VHS, RGB
PAL/NTSC/SECAM
CVBS, S-VHS, RGB
PAL/NTSC/SECAM
CVBS, S-VHS, RGB
SCART 1
Video Input/Output
RGB Input
Audio Input/Output
1.0 Vp-p @ 75 ohm
0.7 Vp-p @ 75 ohm
500 mVrms
1.0 Vp-p @ 75 ohm
0.7 Vp-p @ 75 ohm
500 mVrms
1.0 Vp-p @ 75 ohm
0.7 Vp-p @ 75 ohm
500 mVrms
1.0 Vp-p @ 75 ohm
0.7 Vp-p @ 75 ohm
500 mVrms
SCART 2
Video Input/Output
Audio Input/Output
Power Supply
1.0 Vp-p @ 75 ohm
500 mVrms
1.0 Vp-p @ 75 ohm
500 mVrms
1.0 Vp-p @ 75 ohm
500 mVrms
1.0 Vp-p @ 75 ohm
500 mVrms
AC220-240V 50 Hz
AC220-240V 50 Hz
AC220-240V 50 Hz
AC220-240V 50 Hz
1 W
< 0.7 W
152 W
< 0.7 W
170 W
< 0.7 W
190 W
< 0.7 W
769.0 X 79.0 X 471.0 mm
(30.3 X 3.1 X 18.5 inches)
769.0 X 226.0 X 526.0 mm
(30.3 X 8.9 X 20.7 inches)
892.5 X 82.0 X 544.0 mm
(35.1 X 3.2 X 21.4 inches)
892.5 X 249.0 X 615.0 mm
(35.1 X 9.8 X 24.2 inches)
1026.5 × 94.1 × 626.1 mm
(40.4 X 3.7 X 24.6 inches)
1026.5 × 330.0 × 698.8 mm
(40.4 X 13.0 X 27.5 inches)
1100.5 X 95.0 X 661.0 mm
(43.3 X 13.0 X 28.8 inches)
1100.5 X 330.0 X 732.5 mm
(43.3 X 13.0 X 28.8 inches)
DTV Video/ Audio Decoding
Video Decoding
Bit rate
Resolution
Audio Decoding
Sound Mode
Power Consumption
Stand-by
Dimension (W x D x H)
Body
With stand
Weight (With stand)
10.4 kg (22.9 Ibs)
13.9 kg (30.6 Ibs)
22.5 kg (49.6 Ibs)
23.7 kg (52.2 Ibs)
Environmental Considerations
Operating Temperature
10 °C to 40 °C (50 °F to 104 °F) 10 °C to 40 °C (50 °F to 104 °F) 10 °C to 40 °C (50 °F to 104 °F) 10 °C to 40 °C (50 °F to 104 °F)
Operating Humidity
10 % to 80 %, non-condensing 10 % to 80 %, non-condensing 10 % to 80 %, non-condensing 10 % to 80 %, non-condensing
Storage Temperature
-20 °C to 45 °C (-4 °F to 113 °F) -20 °C to 45 °C (-4 °F to 113 °F) -20 °C to 45 °C (-4 °F to 113 °F) -20 °C to 45 °C (-4 °F to 113 °F)
Storage Humidity
5 % to 95 %, non-condensing 5 % to 95 %, non-condensing 5 % to 95 %, non-condensing 5 % to 95 %, non-condensing
Audio Characteristics
Audio Input
RCA Jack(L, R), 0.5 Vrms(-9 dB) RCA Jack(L, R), 0.5 Vrms(-9 dB) RCA Jack(L, R), 0.5 Vrms(-9 dB) RCA Jack(L, R), 0.5 Vrms(-9 dB)
Audio Input (PC)
3.5 Ø Stereo Jack, 0.5 Vrms (-9 dB) 3.5 Ø Stereo Jack, 0.5 Vrms (-9 dB) 3.5 Ø Stereo Jack, 0.5 Vrms (-9 dB) 3.5 Ø Stereo Jack, 0.5 Vrms (-9 dB)
Headphone Output
Max. 10 mW Output
Max. 10 mW Output
Max. 10 mW Output
Max. 10 mW Output
(3.5 Ø Stereo Jack, 32 Ω)
(3.5 Ø Stereo Jack, 32 Ω)
(3.5 Ø Stereo Jack, 32 Ω)
(3.5 Ø Stereo Jack, 32 Ω)
Frequency
RF: 80 Hz ~ 15 kHz (at -3 dB) RF: 80 Hz ~ 15 kHz (at -3 dB) RF: 80 Hz ~ 15 kHz (at -3 dB) RF: 80 Hz ~ 15 kHz (at -3 dB)
Response
A/V: 80 Hz ~ 20 kHz (at -3 dB) A/V: 80 Hz ~ 20 kHz (at -3 dB) A/V: 80 Hz ~ 20 kHz (at -3 dB) A/V: 80 Hz ~ 20 kHz (at -3 dB)
Sound
Output
5WX2
10 W X 2
10 W X 2
10 W X 2
3D Surround
SRS TrusurroundXT SRS TrusurroundXT SRS TrusurroundXT SRS TrusurroundXT Stereo
Nicam/A2
Nicam/A2
Nicam/A2
Nicam/A2
English-39
BN68-01007K-00Eng.indd 39
2006-07-05 �� 4:56:18
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before
attempting to install the product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any
internal part of this product.
This symbol alerts you that important literature
concerning operation and maintenance has been
included with this product.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be
blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation
is provided.
• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
• Do not place sources of heat on this apparatus, such as a candles, ash trays, incense or other similar items.
• Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool etc.).
If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean this apparatus with damp cloth when necessary, but be sure to unplug the apparatus first.
• Do not expose this apparatus to extreme temperature conditions or to extreme humidity conditions.
• This appratus use batteries. In your community there might be regulations that require you to dispose of these batteries
properly under environmental considerations. Please contact your local authorities for disposal or recycling information.
• To cut off the power source, unplug this apparatus from the wall outlet.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor
corrsponds to the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Be sure to hold the plug, not the cord, when disconnecting this apparatus from an electric socket.
• Locate this apparatus near an easily accessible AC outlet.
• If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it
- unplug it immediately and contact an authorized dealer or service center.
• Unplug this apparatus from the AC outlet before any service.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an
extended period of time (especially when children, elderly or disabled people will be left alone in the house).
- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate
sparks and heat or the insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train
station etc. Failure to do so may cause serious damage to your set.
182x257-safty.indd 2
2006-07-05 �� 4:52:04
Wiring the Mains Power Supply Plug(UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated
on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must
be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point,
you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no
alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains
socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows :
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
Warranty Card
United Kingdom
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective
materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from
whom it was purchased.
However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty
on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are
available from:
Samsung Electronics (U.K.) Ltd.,
Unit C, Customer Care Centre, Stafford Park 12,
TELFORD, Shropshire TF3 3BJ,
Tel: 0870) 242 0303, Fax: 01952) 297617
WARRANTY CONDITIONS
1.The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced.
2.Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.
3.Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement
will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.
4.This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any Country other than the one for which the product was originally designed and manufactured.
182x257-safty.indd 3
2006-07-05 �� 4:52:04
This page is intentionally
left blank.
BN68-01007K-00Eng.indd 40
2006-07-05 �� 4:56:18
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product should not be mixed with other
commercial wastes for disposal.
Wee-UK.indd 1
2006-07-05 �� 4:43:27
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising