Samsung LS17M24CU User manual

Add to My manuals
68 Pages

advertisement

Samsung LS17M24CU User manual | Manualzz

BN68-00858A-00cover.qxd 1/9/04 10:13 AM Page 1

LT-P1545

LT-P1745

LT-P1745U

LT-P2045

LT-P2045U

1-800-SAMSUNG(1-800-726-7864)

U . S . A

Samsung Electronics America

Service Division

400 Valley Road, Suite 201

Mount Arlington, NJ 07856 www.samsung.com

Canada

Samsung Electronics Canada Inc.

Samsung Customer Care

7037 Financial Drive

Mississauga, Ontario

L5N 6R3 www.samsung.ca

BN68-00858A-00

This device is a Class B digital apparatus.

Register your product at www.samsung.com/global/register

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 1

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Digital Ready TV: When you select the regular screen (4:3) mode to watch an SD-grade digital broadcast (and the set-top box output is 480p).

• Digital Ready TV: When you select the wide screen (16:9) mode to watch an SD-grade digital broadcast (and the set-top box output is 1080i).

Although digital broadcasting must be in the wide screen (16:9) HD format, broadcasters sometimes show programs made originally in the regular screen format (4:3) by converting the signals into digital form, in which case the left and right side edges of the screen are cropped.

Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.

Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.

• Digital Ready TV: When the

TV receives HD-grade signals

(and the set-top box output is 1080i).

When you watch a digital HD-grade broadcast on a regular (4:3) TV with the screen size "16:9" or "Panorama" selected, you will be able to watch the program but the top and bottom edges of the screen will be cropped.

Note : If the borders at the top, bottom and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.

Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 2

• Integrated Digital TV

(Wide-screen): When the TV receives SD-grade (regular) broadcasting signals (receives

480p regular signals).

• Digital Ready TV (wide-screen): digital TV: When the TV receives

SD-grade (regular) broadcasting signals (with a set-top box).

When you watch an analog

(regular) broadcast on a wide-screen TV (with the 4:3 screen mode selected).

• When you watch a DVD, CD or a video in wide-screen (21:9) format on a wide-screen (16:9) TV.

• When you connect a computer or a game console to the TV and select the 4:3 screen mode.

Although digital broadcasting must be in the wide screen (16:9) HD format, broadcasters sometimes show programs made originally in the regular screen format (4:3) by converting the signals into digital form, in which case the left and right side edges of the screen are cropped.

Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.

Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.

If you connect a DVD player, computer or a game console to the wide-screen TV and watch a movie or play a game in regular

(4:3) or wide (21:9) screen mode, the left and right side edges, or the top and bottom edges of the screen will be cropped.

Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.

Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn.

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 3

C

O N T E N T S

Chapter 1: Your New TV

List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

List of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Familiarizing Yourself with Your New TV . . . . . . . . . . . . . . . . . . . . . .2

Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Installing Batteries in the Remote Control . . . . . . . . . . . . . . .5

If remote control doesn’t work! . . . . . . . . . . . . . . . . . . . . . . .5

Chapter 2: Installation

Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . . .6

Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . .6

Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . .7

Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . .7

Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . .7

Connecting to a Cable Box that Descrambles All Channels . .8

Connecting to a Cable Box that Descrambles Some Channels . .8

Connecting a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Connecting an S-VHS VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Chapter 3: Special Features

Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . .13

Using the PRE-CH Button to select the Previous Channel . .13

Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Chapter 4: Operation

Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . .16

Storing Channels in Memory (Automatic Method) . . . . . . . .17

To check the channels stored in memory . . . . . . . . . . . . . . .17

To select channels over 100 . . . . . . . . . . . . . . . . . . . . . . . . .17

ADD and DEL Channels (Manual Method) . . . . . . . . . . . . .18

To select the Input Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

To Edit the Input Source Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

To select the Sound option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

C

O N T E N T S

1

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 4

C

O N T E N T S

Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Setting the Blue Screen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Adjusting the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Automatic Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Option 1: Setting the Clock Manually . . . . . . . . . . . . . . . . .29

Option 2: Using the Local PBS Channel to Automatically

Set the TV Clock . . . . . . . . . . . . . . . . . . . . . . . .30

Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Using the V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . .36

How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . .37

How to Set up Restrictions Using the ‘TV guidelines’ . . . . .38

How to Set up Restrictions Using the MPAA Ratings:

G, PG, PG-13, R, NC-17, X . . . . . . . . . . . . . . . . . . . . . . . .40

How to Reset the TV after the V-Chip

Blocks a Channel (‘Emergency Escape’) . . . . . . . . . . . . . . .41

How to Set up Restrictions Using Canadian English . . . . . .42

How to Set up Restrictions Using Canadian French . . . . . . .43

Chapter 5: PC Display

Using Your TV as a Computer (PC) Display . . . . . . . . . . . . . . . . . . .44

How to Set up Your PC Software (Windows only) . . . . . . . .44

Adjusting the Screen Quality . . . . . . . . . . . . . . . . . . . . . . . .45

Changing the Screen Position . . . . . . . . . . . . . . . . . . . . . . .46

To Initialize the Screen Position or Color Settings . . . . . . . .47

How to Auto Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Adjusting the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Customizing the Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Chapter 6: Troubleshooting

Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Appendix

Using the Anti-Theft Kensington Lock . . . . . . . . . . . . . . . . . . . . . . .55

Retractable Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Installing VESA compliant mounting devices . . . . . . . . . . . . . . . . . .57

Installing the Wall Mount Kit (LT-P1545/LT-P1745/LT-P1745U) . . . . . .58

Installing the Wall Mount Kit (LT-P2045/LT-P2045U) . . . . . . . . . . . . . .60

Display Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . .62

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

C

O N T E N T S

2

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 1

C h a p t e r O n e

Y

O U R

N

E W

T V

List of Features

Your TV was designed with the latest technology.

This TV is a high-performance unit that includes the following special features:

• Easy-to-use remote control

• Easy-to-use on-screen menu system

• Automatic timer to turn the TV on and off

• Adjustable picture and sound settings that can be stored in the TV’s memory

• Automatic channel tuning for up to 194 channels.(Air : 69 , STD : 125 )

• A special filter to reduce or eliminate reception problems

• Fine tuning control for the sharpest picture possible

• A built-in multi-channel sound decoder for stereo and bilingual listening

• Built-in, dual channel speakers

• Headphone jack for private listening

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

Remote Control

(BN59-00429A) &

Batteries (AAA x 2)

17”

15” / 20”

Power Cord

17" : 3903-000144

15"/20" : 3903-000085

15” / 17” 20”

Wall Mount kit

15"/17" : BN96-01270A

20" : BN96-01271A

Owner’s

Instructions

English1

BN68-00858A-00Eng 1.qxd 1/9/04 10:51 AM Page 2

Y

O U R

N

E W

T V

Familiarizing Yourself with Your New TV

Front Panel Buttons

The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.

SOURCE

Displays a menu of all of the available input sources (TV, VIDEO, S-VIDEO,

Component, PC)

You can also use the SOURCE( ) button on the TV’s control panel to make selections.

MENU

Press to see an on-screen menu of your TV’s features.

– VOL +

Press to decrease or increase the volume.

These keys can be used to move to a menu item that you want to select in the OSD menu.

CH

Press to change channels. Also press to highlight various items on the on-screen menu.

English2

POWER

Press to turn the TV on and off.

HEADPHONE JACK

Connect a set of external headphones to this jack for private listening.

SPEAKERS

REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.

POWER INDICATOR

Lights up when you turn the power off.

(Red light shows in stand-by mode, Red shows when you turn the power on, and light is off after the power is on. Green shows when you set Timer on or off.)

BN68-00858A-00Eng 1.qxd 1/9/04 11:21 AM Page 3

Y

O U R

N

E W

T V

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player.

For more information on connecting equipment, see pages 6 ~ 12.

< LT-P1745 / LT-P1745U > < LT-P1545 / LT-P2045 / LT-P2045U >

POWER INPUT

PC AUDIO IN (STEREO)

PC VIDEO INPUT

Connect to the video output port on your PC.

VIDEO INPUT

Connect a video signal from a camcorder or VCR.

AUDIO INPUT

Connect an audio signal(L/R) from a camcorder or VCR.

S-VIDEO INPUT

Connect an S-Video signal from a camcorder or VCR.

TV ANTENNA

Connect to an antenna or to a cable

TV system.

COMPONENT

Connect a component video/audio.

KENSINGTON LOCK

(See page 55)

English3

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 4

Y

O U R

N

E W

T V

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

When using the remote, always point it directly at the TV.

POWER (See Page 13)

Turns the TV on and off.

NUMBER BUTTONS

Press to select channels directly on the TV.

+100

Press to select channels over 100.

For example, to select channel

121, press “+100,” then press

“2” and “1.”

CH and CH

(Channel Up/Down) channels.

VOL+ and VOL-

Press to increase or decrease the volume.

MUTE (See Page 13)

Press to temporarily cut off the sound.

SLEEP (See Page 34)

Press to select a time for the TV to turn off automatically.

MENU

Displays the main on-screen menu.

UP/DOWN/LEFT/

RIGHT/ENTER

Use to select on-screen menu items and change menu values.

(The remote control will only function with VCR or DVD units that are compatible with the LCD TV.)

AUTO PROG.

Use to store the broadcast/cable channels that you receive.

P.MODE

Adjust the TV picture by selecting one of the preset factory settings.

PRE-CH

Turns to the previous channel.

SOURCE (See Page 19)

Input source selection

INFO DISPLAY

Use to see information on the current broadcast.

EXIT

Press the menu to exit.

ADD/DEL

Use to store and delete channels to/from memory.

CAPTION

Press to set caption on/off.

MTS

(Multichannel Television Stereo)

Press to choose stereo, mono or

Separate Audio Program

(SAP broadcast).

S.MODE

Adjust the TV sound by selecting one of the preset factory settings.

English4

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 5

Y

O U R

N

E W

T V

Installing Batteries in the Remote Control

1

Slide the cover out completely.

2

Install two AAA size batteries.

Make sure to match the “

+

” and

” ends of the batteries with the diagram inside the compartment.

3

Replace the cover.

If remote control doesn’t work

Check the following:

1. Is the TV power switch on?

2. Are the plus and minus ends of the batteries reversed?

3. Did the batteries run out?

4. Is the power out, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

English5

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 6

C h a p t e r Tw o

I

N S TA L L AT I O N

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with

300-ohm Flat Twin Leads” below.

If your antenna has one lead that looks like this, see “Antennas with 75-ohm

Round Leads” on page 7.

If you have two antennas, see “Separate

VHF and UHF Antennas” on page 7.

Antennas with 300-ohm Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has

300-ohm twin flat leads, follow the directions below.

1

Place the wires from the twin leads under the screws on a 300-

75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws.

2

Plug the adaptor into the TV ANTENNA terminal on the bottom of the back panel.

English6

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 7

I

N S TA L L AT I O N

Antennas with 75-ohm Round Leads

1

Plug the antenna lead into the TV

ANTENNA terminal on the bottom of the back panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1

Connect both antenna leads to the combiner.

2

Plug the combiner into the TV

ANTENNA terminal on the bottom of the rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1

Plug the incoming cable into the TV

ANTENNA terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

English7

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 8

I

N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the

ANTENNA OUT terminal on your cable box.

This terminal might be labeled

“ANT OUT”, “VHF OUT”, or simply, “OUT”.

2

Connect the other end of this cable to the TV

ANTENNA terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the

ANTENNA IN terminal on your cable box.

This terminal might be labeled

“ANT IN”, “VHF IN”, or simply,

“IN”.

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an

OUTPUT terminal on the splitter and the IN terminal on the cable box.

English8

BN68-00858A-00Eng 1.qxd 1/9/04 11:31 AM Page 9

I

N S TA L L AT I O N

4

Connect a coaxial cable between the

ANTENNA OUT terminal on the cable box and the

B–IN terminal on the

A/B switch.

5

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

6

Connect the last coaxial cable between the OUT terminal on the RF

(A/B) switch and the

VHF/UHF terminal on the rear of the

TV.

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels.

(When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

Connecting a PC

1

Connect a PC video cable(D-Sub) between

PC IN [PC] connector on the TV and the PC output connector on your computer.

2

Connect a PC audio cable between

PC IN [AUDIO] on the

TV and the Audio Out of the sound card on your computer.

English9

BN68-00858A-00Eng 1.qxd 1/9/04 11:31 AM Page 10

I

N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6-9).

Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the

ANTENNA IN terminal on the back of the

VCR.

3

Connect a coaxial cable between the

ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO

OUT jacks on the

VCR and the AUDIO jacks on the TV.

If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV.

If your VCR is stereo, you must connect two cables.

5

Connect a video cable between the

VIDEO OUT jack on the VCR and the

VIDEO jack on the

TV.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

* Each external input source device has a different back panel configuration.

English10

BN68-00858A-00Eng 1.qxd 1/9/04 11:31 AM Page 11

I

N S TA L L AT I O N

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.

(This connection delivers a better picture as compared to a standard VHS VCR.)

1

To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your

VCR and your TV.

2

Connect a set of audio cables between the

AUDIO OUT jacks on the VCR and the

AUDIO INPUT jacks on the TV.

3

Connect an S-video cable between the

S-VIDEO OUT jack on the VCR and the

S-VIDEO INPUT jack on the TV.

An S-video cable is usually included with an S-VHS VCR.

(If not, check your local electronics store.)

* Each external input source device has a different back panel configuration.

English11

BN68-00858A-00Eng 1.qxd 1/9/04 11:31 AM Page 12

I

N S TA L L AT I O N

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

1

Connect a set of audio cables between the

L, R AUDIO INPUT jacks on the TV and the AUDIO OUT jacks on the DVD player.

2

Connect a video cable between the

COMPONENT

(Y, Pb, Pr) jacks on the TV and the Y, Pb,

Pr jacks on the DVD player.

Note : For an explanation of Component video, see your DVD player owner's manual.

The component terminal of this set only supports 480i/480p resolution.

* Each external input source device has a different back panel configuration.

English12

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 13

C h a p t e r T h r e e

S

P E C I A L

F

E AT U R E S

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the Power button on the front panel.

Changing Channels

Using the Channel Buttons

1

Press the CH / buttons to change channels.

When you press the CH / buttons, the TV changes channels in sequence.

You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized.

Using the PRE-CH Button to select the Previous Channel

1

Press the PRE-CH button.

The TV will switch to the last channel viewed.

To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them.

Adjusting the Volume

1 To control speaker volume.

2 To control headphone volume.

- when headphone is connected.

When a headphone is connected, the Volume Control OSD screen changes automatically as in number 2.

Press the VOL +/– buttons to increase or decrease the volume.

Using Mute

At any time, you can temporarily cut off the sound using the Mute button.

1

Press MUTE and the sound cuts off.

The word

“ ” will appear in the lower-left corner of the screen.

2

To turn mute off, press the MUTE button again, or simply press the VOL +/- buttons.

English13

BN68-00858A-00Eng 1.qxd 1/9/04 10:11 AM Page 14

S

P E C I A L

F

E AT U R E S

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

1

Press the INFO button on the remote control.

The TV will display the channel, the type of sound, and the status of certain picture and sound settings.

The on-screen displays disappear after about ten seconds.

Press the button once more or wait approximately 10 seconds and it disappears automatically.

Allows the user to adjust the settings according to his/her preference and shows the current settings.

Viewing the Menus

1

With the power on, press the MENU button.

The main menu appears on the screen. Its left side has five icons:

Input, Picture, Sound,

Channel, and Setup.

2

Use the UP/DOWN buttons to select one of the five icons. Then press ENTER to access the icon’s sub-menu.

3

Press the EXIT button to exit.

The on-screen menus disappear from the screen after about two minutes.

You can also use the

SOURCE buttons on the control panel of the TV to make selections.(See page 19)

English14

BN68-00858A-00Eng 2.qxd 1/9/04 10:34 AM Page 15

C h a p t e r F o u r

O

P E R AT I O N

Plug & Play Feature

When the TV is initially powered On, two basic customer settings proceed automatically and subsequently: Setting Auto program, Clock.

1

Press the POWER button on the remote control.

The message “Plug &

Play” is displayed.

2

Press the

UP/DOWN buttons to select “English”,

“Français”, “Español”, or

“Português” then press the ENTER button.

Press the UP/DOWN buttons to select

“Air”,“STD”, “HRC” or

“IRC”, then press the

ENTER button.

3

Press the ENTER

Button. The TV will begin memorizing all of the available channels.

Press the ENTER button to stop.

Press the MENU( Clock ) button on the remote control to display a window where you can configure the time settings.

You can select the Hour or Minute by pressing the number buttons on the remote control.

4

Press the

LEFT/RIGHT buttons to move to the hour or minute.

Set the Hour or Minute by pressing the

UP/DOWN buttons.

(refer to “Setting the

Clock” on page 29).

5

The message

“Enjoy your watching.” is displayed.

English15

BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 16

O

P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels

(manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Channel”, then press the ENTER button.

2

Press the ENTER button to cycle through these choices:

Air, STD, HRC or IRC

(all cable TV).

Press the

UP/DOWN buttons to select the

Video signal source, then press the

ENTER button.

Press the EXIT button to exit.

Note : STD, HRC and IRC identify various types of cable

TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point, the signal source has been selected.

Proceed to “Storing Channels in Memory” (next page).

English16

BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 17

O

P E R AT I O N

Storing Channels in Memory (Automatic Method)

1

First, select the correct signal source (Air, STD,

HRC, IRC). See steps

1~2 on previous page.

Press the MENU button.

Press the

UP/DOWN buttons to select “Channel”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “Auto Program”.

Press the ENTER button.

3

Press the ENTER button.

The TV will begin memorizing all of the available channels.

4

After all the available channels are stored, the Auto Program menu reappears.

Press the EXIT button to exit.

To check the channels stored in memory

Press the CH / button.

Only the channels stored in memory are selected.

To select channels over 100

Ex) Press to select channel 108.

The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.

Press ENTER at any time to interrupt the memorization process and return to the CHANNEL menu.

Note: You can also press the

AUTO PROG. button to select available channels.

English17

BN68-00858A-00Eng 2.qxd 1/9/04 10:41 AM Page 18

O

P E R AT I O N

ADD and DEL Channels (Manual Method)

1

Use the number buttons to directly select the channel to Add or Delete.

Press the MENU button to display the menu.

Press the UP/DOWN buttons to select “Channel”, then press the ENTER button.

Press the UP/DOWN buttons to select “Add/Delete”.

Press the ENTER button.

Press the ENTER button to select

“Add" or "Delete”.

Press the CH / buttons to select channel that you wish to add or delete.

If the channel that you wish to edit is not in memory, the “Add” is selected and displayed.

Otherwise, if the channel that you wish to edit is in memory, the “Delete” is selected and displayed.

Press the EXIT button.

2 Alternate method

Press the ADD/DEL button.

Repeatedly pressing ENTER will alternate between “Add”and“Delete”.

Press the EXIT button.

You can view any channel (including an erased channel) by using the number buttons on the remote control.

English18

BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 19

O

P E R AT I O N

To select the Input Source

Use to select TV or other external input sources connected to the TV.

Use to select the screen of your choice.

1

Press the MENU button to display the on-screen menu.

Press the ENTER button.

2

Press the ENTER button to select “TV”, then press the

ENTER button.

3

Press the

UP/DOWN buttons to select the

Input source, then press ENTER .

Note: You can also press the SOURCE button on the remote to choose the Input source.

English19

BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 20

O

P E R AT I O N

To Edit the Input Source Name

Name the input device connected to the input jacks to make your input source selection easier.

1

Press the MENU button to display the menu.

Press the ENTER button.

Press the UP/DOWN buttons to select

“Edit Name” then press the ENTER button.

2

Press the UP/DOWN buttons to select “AV”,

“S-Video”, “Component”, or “PC” then press the

ENTER button.

3

Press the

UP/DOWN buttons repeatedly until the appropriate source name appears.

After the source is selected, press the

ENTER button.

Press the EXIT button to exit.

Note: DHR = DVD HDD Receiver

English20

BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 21

O

P E R AT I O N

Using Automatic Picture Settings

Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and

“Custom”) that are preset at the factory. You can activate either Dynamic, Standard, or

Movie by pressing P.MODE (or by making a selection from the menu). Or, you can select “Custom” which automatically recalls your personalized picture settings.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Picture”, then press the ENTER button twice.

2

Press the

UP/DOWN to select the buttons

“Dynamic”, “Standard”,

“Movie”, or “Custom” picture setting.

Press the

ENTER button.

Press the EXIT button to exit.

Alternate method:

Simply press the P.MODE button on the remote control to select one of the standard picture settings.

• Choose Dynamic to increase the clarity and sharpness of the picture.

• Choose Standard for the standard factory settings.

• Choose Movie when viewing a Movie.

• Choose Custom if you want to adjust the settings according to personal preference (see “Customizing the Picture”, page 22).

English21

BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 22

O

P E R AT I O N

Customizing the Picture

You can use the on-screen menus to change the contrast, brightness, sharpness, color and tint according to personal preference.

(Alternatively, you can use one of the “automatic” settings. See the previous page.)

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Picture”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “Custom”, then press the ENTER button.

3

Press the

UP/DOWN buttons to select

Contrast, Brightness,

Sharpness,

Color, or Tint.

Press the ENTER button to select a particular item.

4

Press the

LEFT/RIGHT buttons to decrease or increase the value of a particular item.

For example, if you select

“Contrast”, pressing RIGHT increases it.

Press the EXIT button to exit.

Note: The Tint feature does not work in component mode.

English22

BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 23

O

P E R AT I O N

Using Automatic Sound Settings

Your TV has two automatic sound settings (“Standard”, and “Speech”) that are preset at the factory. You can activate either of them by pressing the S.MODE button (or by making a selection from the on-screen menu). Or, you can select “Custom Sound”, which automatically recalls your personalized sound settings.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Sound”, then press the ENTER button.

Press the

ENTER button to select “Mode”

2

Press the

UP/DOWN buttons repeatedly to select the

“Standard”, or “Speech” sound settings.

Press the EXIT button to exit.

Alternate method:

Simply press the S.MODE button on the remote control to select one of the standard sound settings.

• Choose Standard for the standard factory settings.

• Choose Speech when watching a show that is mostly dialogue (i.e., news).

English23

BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 24

O

P E R AT I O N

To select the Sound option

The sound settings can be adjusted to suit your personal preference.

(Alternatively, you can use one of the “automatic” settings. See the previous page.)

Depending on the particular program being broadcast, you can listen to stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather.)

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Sound”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select

“MTS”, then press the ENTER button.

3

Press the

UP/DOWN buttons to select

“Mono”, “Stereo” or

“SAP”, then press the

ENTER button.

Press the EXIT button to exit.

• Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal.

• Choose Stereo for channels that are broadcasting in stereo.

• Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language translation.

You can also change the MTS setting by pressing the “MTS” button on the remote control. (When you change channels, MTS is set to “Stereo” automatically. To listen in ‘SAP’ or ‘Mono’, change the MTS setting.)

In other modes except RF, only Mono and Stereo can be selected.

English24

BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 25

O

P E R AT I O N

Selecting a Menu Language

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select Language.

Press the ENTER button.

3

Press the

UP/DOWN buttons to select “English”,

“Français”, “Español”, or

“Português”.

Press the EXIT button to exit.

English25

BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 26

O

P E R AT I O N

Setting the Blue Screen Mode

If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.

If you wish to continue viewing the poor picture, you must set the “Blue screen” mode to “Off ”.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “Blue Screen”, then press the

ENTER button.

Pressing the UP/DOWN buttons will alternate between

“On” and “Off ”.

3

Press the

UP/DOWN buttons to set Blue Screen

“On” or “Off ”.

Press the EXIT button to exit.

English26

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 27

O

P E R AT I O N

Adjusting the Color Tone

You can change the color of the entire screen according to your preference.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Picture”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “Color Tone”, then press the

ENTER button.

3

Press the

UP/DOWN buttons to select Color Tone.

Press the EXIT button to exit.

Choose from the following

Color Tone settings:

“Cool 2”, “Cool 1”, “Normal”,

“Warm 1”, “Warm 2” according to personal preference.

English27

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 28

O

P E R AT I O N

Automatic Volume Control

Reduces the differences in volume level among broadcasters.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Sound”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “Auto Volume”, then press the

ENTER button.

3

Press the

UP/DOWN buttons to set Auto Volume “Off” or “On”.

Press the EXIT button to exit.

English28

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 29

O

P E R AT I O N

Setting the Clock

Setting the clock is necessary in order to use the various timer features of the TV.

Also, you can check the time while watching the TV. (Just press the INFO button.)

Option 1: Setting the Clock Manually

1

Press the MENU button to display the on-screen menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

Press the ENTER button to select "Time".

2

Press the ENTER button to select "Clock".

Press the

UP/DOWN buttons to select "Clock Set" then press the

ENTER button.

Note :You can also set the time using the numeric buttons on the remote.

3

Press the

UP/DOWN buttons repeatedly until the correct hour appears.

After the hour is entered, press the

LEFT/RIGHT select “Minute”.

buttons to

Press the

UP/DOWN buttons until the correct minute appears.

Press the

LEFT/RIGHT buttons to select am/pm and adjust with the

UP/DOWN buttons.

Press the EXIT button to exit.

English29

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 30

O

P E R AT I O N

Option 2: Using the Local PBS Channel to Automatically

Set the TV Clock

1

Press the MENU button to display the on-screen menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

Press the ENTER button to select "Time".

Press the ENTER button to select "Clock".

2

Press the

UP/DOWN buttons to select "Clock Mode" then press the

ENTER button.

Press the UP/DOWN buttons to select "Auto" then press the

ENTER button.

4

Press the UP/DOWN buttons to select "PBS

Channel"then press the

ENTER button.

5

Press the UP/DOWN buttons to select your local “PBS Channel” then press the ENTER button.

English30

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 31

O

P E R AT I O N

6

Press the UP/DOWN buttons to select "Time

Zone" then press the

ENTER button.

7

Press the UP/DOWN buttons to change

Time Zone.

Sequence: ATL., EAST,

CEN, MTN, PAC., ALAS,

HAW..

Press the ENTER button.

Press the UP/DOWN buttons to select "DST"

(Daylight Saving Time)then press the ENTER button.

9

Press the UP/DOWN buttons to select "No" or

"Yes" then press the

ENTER button.

Press the EXIT button to exit.

Note: Make sure the PBS channel is in memory before using this feature.

English31

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 32

O

P E R AT I O N

Setting the On/Off Timer

1

Press the MENU button to display the on-screen menu.

Press the

UP/DOWN buttons to select

“Setup”, then press the

ENTER button.

Press the ENTER button to select "Time".

2

Press the UP/DOWN buttons to select “On

Timer”, then press the

ENTER button.

Press the UP/DOWN buttons repeatedly to select the appropriate hour.

After the hour is entered, press the

LEFT/RIGHT to select “Minute”.

buttons

Press the

UP/DOWN buttons until the correct minute appears.

Press the

LEFT/RIGHT buttons to select “am/pm” and adjust with the

UP/DOWN buttons.

Before using the timer, you must set the TV’s clock.

(See “Setting the Clock” on page 29)

When you set the hours, make sure the correct time of day (am or pm) appears to the right of the time.

English32

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 33

O

P E R AT I O N

3

Press the

LEFT/RIGHT buttons to select “Channel” and adjust with the

UP/DOWN buttons.

Press the

LEFT/RIGHT buttons to select “Volume” and adjust with the

UP/DOWN buttons.

Press the

LEFT/RIGHT buttons to select Setup.

Press the

UP/DOWN buttons to set the “On”.

(Repeatedly pressing the UP/DOWN buttons will alternate between On and Off.)

When finished, press the

ENTER button.

4

To set the Off time, press the UP/DOWN buttons to select

“Off Timer”.

Press the ENTER button and set the hours and minutes. (Follow the same procedure as in steps 2~3 above.)

5

When finished setting the timer, press the EXIT button to exit.

• Auto Power Off

When you set the timer on, your television will be turned off if you do not operate any controls for 3 hours after the TV has been turned on with the ‘Timer On’ function.

English33

To deactivate the “On time”, select “Off” during this step.

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 34

O

P E R AT I O N

Setting the Sleep Timer

Set the timer for the TV to turn off at the preset time automatically.

Sleep timer

1

Press the MENU button to display the on-screen menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

Press the ENTER button to select “Time”.

2

Press the

UP/DOWN buttons to select “Sleep Timer”, then press the

ENTER button.

3

Press the

UP/DOWN buttons repeatedly until the correct time appears.

Press the EXIT button to exit.

• Easy Way to Set the Sleep Timer

Press the button on the remote.

The number on the screen changes from

Off • 30 • 60 • 90 • 120 • 150 • 180

English34

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 35

O

P E R AT I O N

Viewing Closed Captions

Your TV decodes and displays the closed captions that are broadcast with certain TV shows.

These captions are usually subtitles for the hearing impaired or foreign-language translations.

All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed captions as well. Check for the closed caption symbol in your television schedule and on the tape’s packaging :

.

1

Press the MENU button to display the on-screen menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “Caption”, then press the ENTER button.

Misspellings and unusual

3 characters sometimes occur during when you change channels. These are not malfunctions of the TV.

In caption mode, captions to set caption “Off” or

In text mode, information unrelated to the program, such as news or weather, is displayed. Text often button to exit.

5

Depending on the particular broadcast, it might be necessary to make changes to “Channel” and “Field”.

Press the EXIT button to exit.

English35

Note: You can also press the

CAPTION button on the remote control to set up caption.

Different channels and fields display different information:

Field 2 carries additional information that supplements the information in Field 1.

(For example, Channel 1 may have subtitles in English, while

Channel 2 has subtitles in Spanish.)

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 36

O

P E R AT I O N

Using the V-Chip

The V-Chip feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a PIN (personal ID number) before any of the V-Chip restrictions can be set up or changed.

Setting Up Your Personal ID Number (PIN)

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “V-Chip”, then press the ENTER button.

3

The “Enter PIN” screen will appear. Enter your

4-digit PIN.

Note: The default PIN for your new TV set is

0-0-0-0”.

4

After entering a valid

PIN number, the

“V-Chip” screen will appear. Press the

UP/DOWN buttons to select “Change PIN”.

[ USA ]

5

Press the ENTER button.

The Change PIN screen will appear. Choose any

4-digits for your PIN and enter them.

As soon as the 4 digits are entered, the “Confirm new PIN” screen appears.

Re-enter the same

4 digits.

When the Confirm screen disappears, your PIN has been memorized. Press the EXIT button to exit.

[ Canada ]

Note: If you forget the PIN, press the remote-control buttons in the following sequence,which resets the PIN to 0-0-0-0:

POWER OFF

➔ MUTE ➔

8

➔ 2 ➔ 4 ➔ POWER ON.

English36

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 37

O

P E R AT I O N

How to Enable/Disable the V-Chip

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “V-Chip”, then press the ENTER button.

3

The “Enter PIN” screen will appear. Enter your

4-digit PIN.

4

The “V-Chip” screen will appear, and “V-Chip Lock” will be selected.

[ USA ]

To enable the V-Chip feature, press the

ENTER button so that the “V-Chip Lock” is set to Yes. (Pressing the

UP/DOWN buttons will alternate between On and Off.)

[ Canada ]

English37

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 38

O

P E R AT I O N

How to Set up Restrictions Using the ‘TV guidelines’

First, set up a personal identification number (PIN), and enable the V-Chip.

(See previous section.) Parental restrictions can be set up using either of two methods:

The TV guidelines or the MPAA rating.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “V-Chip”, then press the ENTER button.

The “Enter PIN” screen will appear. Enter your

4-digit PIN.

3

Press the UP/DOWN buttons to select

“TV Parental Guidelines”, then press the ENTER button.

[ USA ] [ Canada ]

4

The “TV Parental Guidelines” screen will appear.

Press the UP/DOWN buttons to select one of the six age-based categories:

TV-Y Young children

TV-Y7 Children 7 and over

-----------------------------------------

TV-G General audience

TV-PG Parental guidance

TV-14 Viewers 14 and over

TV-MA Mature audience

Note: These categories consist of two separate groups : TV-Y and

TV-Y7 (young children through age 7), and TV-G through TV-MA

(everybody else).

The restrictions for these two groups work independently:

If a household includes very young children as well as young adults, the TV guidelines must be set up separately for each age group.

(See next step.)

English38

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 39

O

P E R AT I O N

5

At this point, one of the TV-Ratings is selected.

Press the ENTER( )button: Depending on your existing setup, the color of the letter “U” or “B” will be highlighted. (U= Unblocked, B= Blocked)

When the color of the “U” or “B” is highlighted, press the ENTER( )button to block or unblock the category.

A TV-Rating will be highlighted. To exit this screen, press MENU again. To select a different TV-Rating, press the UP/DOWN buttons and then repeat the process.

Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options.

See the next step to change any of the following sub-ratings:

FV: Fantasy Violence

D: Sexual suggestive Dialog

L: Adult Language

S: Sexual situation

V: Violence

Note 2: The V-Chip will automatically block certain categories that are “more restrictive.” For example, if you block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the “young adult” group will be blocked

(TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together similarly.

(See next section.)

6

How to set the FV, D, L, S and V sub-ratings.

First, highlight one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA

(See Step 4, on previous page).

Next, while the TV-Rating is selected, repeatedly press the ENTER( )button.

This will cycle through the available sub-ratings (FV,L, S, D or V).

A highlighted letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is highlighted, press the ENTER( )buttons to change the sub-rating.

Press MENU once to save the TV guidelines. A TV-Rating will be selected, and no letters

“U” or “B” will be changed to yellow.

To exit this screen, press the MENU button again. To select a different TV-Rating, press the

UP/DOWN buttons and then repeat the process.

Note: The V-chip will automatically block certain categories that are “More restrictive”.

For example, if you block the “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 andTV-MA will automatically be blocked.

7

Press the EXIT button to clear all the screens.

(Or proceed to the next section, and set up additional restrictions based on the MPAA codes).

English39

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 40

O

P E R AT I O N

How to Set up Restrictions Using the MPAA Ratings:

G, PG, PG-13, R, NC-17, X

The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies.

When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

Press the

UP/DOWN buttons to select “V-Chip”, then press the ENTER button.

2

The “Enter PIN” screen will appear. Enter your

4-digit PIN.

3

Press the

UP/DOWN buttons to select “MPAA Rating”, then press the

ENTER button.

[ USA ] [ Canada ]

English40

BN68-00858A-00Eng 3.qxd 1/9/04 11:08 AM Page 41

O

P E R AT I O N

4

Repeatedly press the

UP/DOWN buttons to select a particular

MPAA category.

(When a category is selected, its color changes to yellow.)

Pressing the

UP/DOWN buttons will cycle through the

MPAA categories:

G

PG Parental guidance suggested.

PG-13 PG-13 (Parents strongly cautioned).

R

General audience

(no restrictions).

R (Restricted. Children under 17 should be accompanied by an adult).

NC-17 No children under age 17.

X X (Adults only).

NR Not rated.

Press the UP/DOWN buttons to select a category.

Press the ENTER ( ) buttons to select “U” or “B”.

Press the EXIT button to save the settings and to clear all screens.

Note: The V-Chip will automatically block any category that is “more restrictive”. For example, if you block the

“PG-13” category, then “R,” “NC-17,” and “X”will automatically be blocked also.

How to Reset the TV after the V-Chip

Blocks a Channel (‘Emergency Escape’)

If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: “Excessive rating”.

To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the channels.

In this case, use the Menu button for an “emergency escape”:

Select the V-Chip on the Menu. Enter your PIN number, and press the ENTER( ) button to temporarily disable the V-Chip Lock.

English41

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 42

O

P E R AT I O N

How to Set up Restrictions Using Canadian

English

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “V-Chip”, then press the ENTER button.

The “Enter PIN” screen will appear. Enter your

4-digit PIN.

[ Canada ]

3

Press the UP/DOWN buttons to select

“Canadian English”, then press the ENTER button.

4

Press the UP/DOWN button to select a appropriate restriction.

Press the ENTER button to activate the restriction selected. The “B” is indicated.

Press the EXIT button to exit.

Canadian English

E: Exempt programming includes ...news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

Programming intended for children under age 8.

C:

C8+: Programming generally considered acceptable for children 8 years and over to watch on their own.

G: General programming, suitable for all audiences.

PG: Parental Guidance.

14+: Programming contains themes or content which may not be suitable for viewers under the age of 14.

18+: Adult programming.

English42

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 43

O

P E R AT I O N

How to Set up Restrictions Using Canadian

French

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Setup”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “V-Chip”, then press the ENTER button.

The “Enter PIN” screen will appear. Enter your

4-digit PIN.

[ Canada ]

3

Press the UP/DOWN buttons to select

“Canadian French”, then press the ENTER button.

4

Press the UP/DOWN button to select a appropriate restriction.

Press the ENTER button to activate the restriction selected. The “B” is indicated.

Press the EXIT button to exit.

Canadian French

E: Exempt programming includes...news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

General.

G:

8 ans+: 8+ General-Not recommended for young children.

13 ans+: Programming may not be suitable for children under the age of 13.

16 ans+: Programming is not suitable for children under the age of 16.

18 ans+: Programming restricted to adults.

English43

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 44

C h a p t e r F i v e

P C D

I S P L AY

Using Your TV as a Computer (PC) Display

How to Set up Your PC Software (Windows only)

The Windows display-settings for a typical computer are shown below.

However, the actual screens on your PC will probably look different, depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in most cases.

(If not, contact your computer manufacturer or Samsung Dealer.)

First, click on “Settings” on the

Windows start menu.

While “Settings” is highlighted, move the cursor so that “Control

Panel” is highlighted.

When the control panel screen appears, click on “Display” and a display dialog-box will appear.

Navigate to the “settings” tab on the display dialog-box.

English44

The two key variables that apply to the TV-PC interface are “resolution” and “colors.” The correct settings for these two variables are:

* Size (sometimes called “resolution”)

- See page 54, 62

If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”.

Otherwise, just click “OK” and exit the dialog box.

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 45

P C D

I S P L AY

Adjusting the Screen Quality

The purpose of the picture quality adjustment is to remove or reduce picture noise.

If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned to the center of the screen.

Preset to PC mode by pressing the SOURCE button on t he remote control.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select

“Setup”, then press the

ENTER button.

Press the

UP/DOWN buttons to select

“PC”, then press the ENTER button.

2

Press the

ENTER button to select “Image Lock”.

3

Press the

UP/DOWN buttons to select

“Coarse” or “Fine”, then press the

ENTER button.

Press the

LEFT/RIGHT buttons to adjust the screen quality, vertical stripes may appear or the picture may be blurry.

<Adjusting Coarse>

<Adjusting Fine>

4

When you are satisfied with the settings, press the

MENU button repeatedly to return to normal viewing.

English45

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 46

P C D

I S P L AY

Changing the Screen Position

Preset to PC mode by pressing the SOURCE button on t he remote control.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select

“Setup”, then press the

ENTER button.

Press the

UP/DOWN buttons to select

“PC”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select

“Position”, then press the ENTER button.

3

Press the

UP/DOWN buttons to adjusting the V-Position.

Press the

LEFT/RIGHT buttons to adjust the H-Position.

Press the EXIT button to exit.

English46

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 47

P C D

I S P L AY

To Initialize the Screen Position or Color Settings

Preset to PC mode by pressing the SOURCE button on t he remote control.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select

“Setup”, then press the

ENTER button.

Press the

UP/DOWN buttons to select

“PC”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select

“Reset”, then press the ENTER button.

3

Press the

UP/DOWN buttons to select

“Image Reset” or

“Color Reset”, then press the ENTER button.

Press the EXIT button to exit.

<Image Reset>

<Color Reset>

English47

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 48

P C D

I S P L AY

How to Auto Adjust

Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions.

Preset to PC mode by pressing the SOURCE button on t he remote control.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select

“Setup”, then press the

ENTER button.

Press the

UP/DOWN buttons to select

“PC”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select

“Auto Adjustment”, then press the

ENTER button.

Press the EXIT button t o exit.

English48

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 49

P C D

I S P L AY

Using Automatic Picture Settings

Preset to PC mode by pressing the SOURCE button on t he remote control.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Picture”, then press the ENTER button twice.

2

Press the

UP/DOWN select the buttons to

“Entertain”, “Internet”,

“Text”, or “Custom” picture setting.

Press ENTER button.

Press the EXIT button to exit.

English49

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 50

P C D

I S P L AY

Customizing the Picture

You can use the on-screen menus to change the contrast, brightness,and sharpness according to personal preference.

(Alternatively, you can use one of the “automatic” settings.)

Preset to PC mode by pressing the SOURCE button on t he remote control.

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Picture”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “Custom”, then press the ENTER button.

3

Press the UP/DOWN buttons to select

“Contrast” or “Brightness”, then press the ENTER button.

4

Press the

LEFT/RIGHT buttons to decrease or increase the value of a particular item.

For example, if you select “Contrast”, pressing RIGHT increases it.

Press the EXIT button to exit.

English50

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 51

P C D

I S P L AY

Adjusting the Color Tone

You can change the color of the entire screen according to your preference.

Preset to PC mode by pressing the SOURCE button on t he remote contro

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Picture”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “Color Tone”, then press the

ENTER button.

3

Press the

UP/DOWN buttons to select color tone.

Press the EXIT button to exit.

Choose from the following

Color Tone settings:

“Cool”, “Normal”, “Warm”,

“Custom”, according to personal preference.

English51

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 52

P C D

I S P L AY

Customizing the Color

Preset to PC mode by pressing the SOURCE button on t he remote contro

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Picture”, then press the ENTER button.

2

Press the

UP/DOWN buttons to select “Color Control”, then press the ENTER button.

3

Press the

UP/DOWN buttons to select Red,

Green, or Blue.

Press the ENTER button to select a particular item.

4

Press the

LEFT/RIGHT buttons to decrease or increase the value of a particular item.

For example, if you select “Red”, pressing RIGHT increases it.

Press the EXIT button to exit.

English52

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 53

C h a p t e r S i x

T

R O U B L E S H O O T I N G

If the TV seems to have a problem, first try this list of possible problems and solutions.

If none of these troubleshooting tips apply, call your nearest Samsung service center.

Identifying Problems

Problem

Poor picture

Poor sound quality.

No picture or sound.

No sound or sound is too low at maximum volume.

Picture rolls vertically.

The TV operates erratically.

The TV won’t turn on.

Remote control malfunctions

“Check Signal Cable” message.

Possible Solution

Try another channel.

Adjust the antenna.

Check all wire connections.

Try another channel.

Adjust the antenna.

Try another channel.

Press the SOURCE button.

Make sure the TV is plugged in.

Check the antenna connections.

First, check the volume of units connected to your TV

(digital broadcasting receiver, DTV, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.

Check all wire connections.

Unplug the TV for 30 seconds, then try operating it again.

Make sure the wall outlet is working.

Replace the remote control batteries.

Clean the upper edge of the remote control

(transmission window).

Check the battery terminals.

Ensure that the signal cable is firmly connected to the

PC sources.

English53

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 54

T

R O U B L E S H O O T I N G

Problem

“Mode Not Supported!” message.

Possible Solution

Check the maximum resolution and the frequency of the video Adapter.

Compare these values with the data in the Display Modes.

The image is too light or too dark.

Horizontal bars appear to flicker, jitter or shimmer on

(See page 62)

Adjust the Brightness and Contrast.

Adjust the Fine function.

Adjust the Coarse function and then adjust the Fine function. (See page 45) the image.

Vertical bars appear to flicker, Adjust the Coarse function and then adjust the Fine jitter or shimmer on the image.

function. (See page 45)

Screen is black and power indicator light blinks steadily.

Image is not stable and may appear to vibrate.

On your computer check: Power,

Signal Cable(15-pin D-Sub)

The TV is using its power management system.

Move the computer's mouse or press any key on the keyboard.

If the setting is not correct, use your computer utility program to change the display settings.

NOTE: Your TV supports multiscan display functions within the following frequency domain:

15”(LT-P1545) 17”(LT-P1745)

17”(LT-P1745U)

20”(LT-P2045) 20”(LT-P2045U)

Horizontal frequency(kHz)

30~69 30~80 28~33 28~47

Vertical frequency(Hz)

50~75 50~75 50~70

Maximum refresh rate

(at 75Hz)

1024x768 1280x1024 640x480

Image is not centered on the screen.

If a still image is displayed for an extended period of time, residual images or blurring may appear.

Adjust the horizontal and vertical position.

When you need to leave the monitor unused for an extended period of time, adjust the settings so that the monitor automatically goes into energy saving mode or activates the screen saver to display moving images.

50~75

800x600

The TFT LCD panel uses a panel consisting of sub pixels (LT-P1545 - 2,359,296 /

LT-P1745/LT-P1745U - 3,932,160 / LT-P2045 - 921,600 / LT-P2045U - 1,440,000) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Note : The component terminal of this set only supports 480i/480p resolution.

English54

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 55

A

P P E N D I X

Using the Anti-Theft Kensington Lock

Cable

Figure 2

Figure 1

<Optional>

The Kensington lock is a device used to physically fix the system when using it in a public place.

The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.

1.

Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2).

2.

Connect the Kensington lock cable.

3.

Fix the Kensington lock to a desk or a heavy stationary object.

English55

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 56

A

P P E N D I X

Retractable Stand

Note: The maximum tilt angle is 13 degrees in the backward direction.

Please do not tilt the TV outside the specified range. Using excessive force to tilt the TV may cause permanent damage to the mechanical part of the stand.

The 20" model swivels left and right.

< LT-P1545 / LT-P1745 / LT-P1745U > < LT-P2045 / LT-P2045U >

English56

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 57

A

P P E N D I X

Installing VESA compliant mounting devices

<1> <2>

T

SCAR

SCART

SC

AR

T

Mounting pad

< LT-P1545 / LT-P1745 / LT-P1745U > < LT-P2045 / LT-P2045U >

<1> Fold the stand pressing the button on the back of the stand.

<2> Align the mounting interface pad with the holes in the stand bottom and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases.

Wall Mount Instructions

The following instructions apply to a hollow sheet-rock wall only. Tools/Hardware needed - Philips screwdriver, four toggle bolts, 5/8in dia. Drill bit and drill. Contact Ergotron at (800) 888-8458 to purchase the triple pivot direct mount adapter and wall mount bracket kit.

• LT-P1545 (15") : No. 47 - 007 - 099 (Pivot direct mount adapter)

No. 97 - 101 - 003 (Wall mount bracket kit)

• LT-P1745 (17") : No. 47 - 007 - 099 (Pivot direct mount adapter)

No. 97 - 101 - 003 (Wall mount bracket kit)

• LT-P1745U (17") : No. 47 - 007 - 099 (Pivot direct mount adapter)

No. 97 - 101 - 003 (Wall mount bracket kit)

• LT-P2045 (20") : No. 47 - 007 - 099 (Pivot direct mount adapter)

No. 97 - 101 - 003 (Wall mount bracket kit)

• LT-P2045U (20") : No. 47 - 007 - 099 (Pivot direct mount adapter)

No. 97 - 101 - 003 (Wall mount bracket kit)

Align the wall mount bracket on the wall at the desired height, making sure that the bracket will be mounted between the wall studs. Mark the four corner openings and drill four 5/8-diameter holes.

Assemble the wall mount kit according to the instructions provided with it. Securely attach Ergotron’s flat panel, triple pivot direct mount adapter to the back of the TV using the four 4mm,

0.7 pitch x 10mm screws provided with the arm. Secure the assembly to the wall using four 3/16 by

3-inch long toggle bolts.

English57

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 58

A

P P E N D I X

Installing the Wall Mount Kit

(LT-P1545/LT-P1745/LT-P1745U)

Note : This installation is to be used when attaching the wall mount to a concrete wall.

When attaching to other building materials, please contact your nearest dealer.

Components

Please use provided components or parts to install the Wall Mount Kit.

Bracket Anchors : 3EA Screws : 3EA Installation Guide

How to assemble the Wall Mount Kit

1

Mark the location of hole on the wall using installation guide.

Make over 35mm- depth- hole on the marked location using

5.0-diameter drill.

Fix anchors on each hole on the wall.

Connect bracket to the wall with screws after fitting anchors into the bracket holes.

Note : If the bracket is not firmly fixed to the wall, LCD TV can fall off.

2

You may use LCD TV right after fixing it to the wall since stand is wrapped already turned over as shown in the picture below.

3

When using LCD TV in stand-based form, place the product on a cushion or other soft materials. Then turn over stand following the arrow direction below only after pressing button on the connected part where LCD TV is attached to stand.

(Turn over stand in the opposite direction after pressing button when using LCD TV in wall-mounted form as well.)

English58

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 59

A

P P E N D I X

Installing the Wall Mount Kit

(LT-P1545/LT-P1745/LT-P1745U)

4

Adjust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be completely fixed to the bracket.

When bracket is assembled on the wall How to hang monitor up on a hook When installation is completed

5

Remove Installation Guide after completing setup of LCD TV on the wall.

6

Push the LCD TV up and shift to the right to detach it from bracket.

When moving or transferring to other areas, reverse No. 4 procedure so as to disconnect LCD TV with ease.

How to adjust an angle

(1) Angle adjustment section of general stand-besd LCD TV

(2) Angle abjustment section while converting the form

(1->3, 3->1)

(3) Angle adjustment section of wall-mounted LCD TV

Picture (1) shows the adjustment angle (0°~ 13°) when you use LCD TV in its general form (stand-based

LCD TV).

Excessive tilting can turn LCD TV over which might cause damage to LCD TV.

Picture (2) shows the adjustment angle (13°~ 80°) when you convert stand-based LCD TV into wall-mounted one.

Picture (3) shows the adjustment angle (0°~ 10°) when you use wall-mounted LCD TV after fixing it to wall.

Note : Picture (2) shows the angle adjustment section while LCD TV is being converted from stand-based one to wall-mounted one or vice versa.

- Click" sound indicates section change from 1 to 2 or 3 to 2 (1->2, 3->2).

English59

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 60

A

P P E N D I X

Installing the Wall Mount Kit

(LT-P2045/LT-P2045U)

Note : This installation is to be used when attaching the wall mount to a concrete wall.

When attaching to other building materials, please contact your nearest dealer.

Components

Please use provided components or parts to install the Wall Mount Kit.

Bracket Anchors : 4EA Screws : 4EA Installation Guide

How to assemble the Wall Mount Kit

1

Mark the location of hole on the wall using installation guide.

Make over 35mm- depth- hole on the marked location using

5.0-diameter drill.

Fix anchors on each hole on the wall.

Connect bracket to the wall with screws after fitting anchors into the bracket holes.

Note : If the bracket is not firmly fixed to the wall, LCD TV can fall off.

2

You may use LCD TV right after fixing it to the wall since stand is wrapped already turned over as shown in the picture below.

3

When using LCD TV in stand-based form, place the product on a cushion or other soft materials. Then turn over stand following the arrow direction below only after pressing button on the connected part where LCD TV is attached to stand.

(Turn over stand in the opposite direction after pressing button when using LCD TV in wall-mounted form as well.)

English60

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 61

A

P P E N D I X

Installing the Wall Mount Kit

(LT-P2045/LT-P2045U)

4

Adjust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be completely fixed to the bracket.

When bracket is assembled on the wall How to hang monitor up on a hook When installation is completed

5

Remove Installation Guide after completing setup of LCD TV on the wall.

6

Push the LCD TV up and shift to the right to detach it from bracket.

When moving or transferring to other areas, reverse No. 4 procedure so as to disconnect LCD TV with ease.

How to adjust an angle

(1) Angle adjustment section of general stand-besd LCD TV

(2) Angle abjustment section while converting the form

(1->3, 3->1)

(3) Angle adjustment section of wall-mounted LCD TV

Picture (1) shows the adjustment angle (0°~ 13°) when you use LCD TV in its general form (stand-based LCD

TV).

Excessive tilting can turn LCD TV over which might cause damage to LCD TV.

Picture (2) shows the adjustment angle (13°~ 80°) when you convert stand-based LCD TV into wall-mounted one.

Picture (3) shows the adjustment angle (0°~ 10°) when you use wall-mounted LCD TV after fixing it to wall.

Note : Picture (2) shows the angle adjustment section while LCD TV is being converted from stand-based one to wall-mounted one or vice versa.

English61

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 62

A

P P E N D I X

Display Mode

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your Videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacture.

VGA

Mode(PC)

LT-P1545

1745

1745U

2045

2045U

LT-P1545/1745/

1745U/2045U

Resolution

Horizontal

Frequency

(kHz)

720X400 31.469

Vertical

Frequency

(Hz)

70.087

Pixel

Clock

Frequency

(MHz)

28.322

640X480

640X480

31.469

37.500

59.940

75.000

25.175

31.500

800X600 46.875

75.000

49.500

SVGA

LT-P1545, 1745, 1745U, 2045U 800X600 37.879

60.317

40.000

1024X768 48.363

60.004

65.000

XGA

LT-P1545, 1745, 1745U 1024X768 60.023

75.029

78.750

1280X1024 63.981

60.020

108.000

SXGA

LT-P1745, 1745U 1280X1024 79.976

75.025

135.000

Sync Polarity

(H/V)

- / +

- / -

- / -

+ / +

+ / +

- / -

+ / +

+,- / -,+

+ / +

Using Your TV in Another Country

If you plan to take your TV with you to a foreign country, please be aware of the different television systems that are in use around the world. A TV designed for one system may not work properly with another system due to differences in the TV channel frequencies.

English62

BN68-00858A-00Eng 4.qxd 1/9/04 10:13 AM Page 63

A

P P E N D I X

Specifications

Model Name

Panel

Size

Display Size

Type

Pixel Pitch

Viewing Angle

Frequency

Horizontal

Vertical

Display Color

Resolution

Optimum

Maximum

Input Signal

Sync.

Video Signal

Video

Color System

Video System

Component

Video Input

Audio Input

Power Supply

Input

Power Consumption

Maximum

Power Saving

Dimension (W x D x H)

TV Body

With stand

LT-P1545

13.05(H) x 10.03(V)inch

331.6(H) x 254.9(V)mm

11.97(H) x 8.98(V)inch

304.1(H) x 228.1(V)mm a-si TFT active matrix

0.297(H) x 0.297(V)mm

140/115

15.09(H) x 11.73(V)inch

383.5(H) x 298.0(V)mm

13.30(H) x 10.64(V)inch

337.9(H) x 270.3(V)mm a-si TFT active matrix

0.264(H) x 0.264(V)mm

140/120

16.25(H) x 12.24(V)inch

413.0(H) x 311.0(V)mm

16.06(H) x 12.05(V)inch

408.0(H) x 306.0(V)mm a-si TFT active matrix

0.6375(H) x 0.6375(V)mm

160/150

16.25(H) x 12.24(V)inch

413.0(H) x 311.0(V)mm

16.06(H) x 12.05(V)inch

408.0(H) x 306.0(V)mm a-si TFT active matrix

0.51(H) x 0.51(V)mm

160/120

30 ~ 69kHz

50 ~ 75Hz

16.2 Million

1024 x 768@60Hz

1024 x 768@75Hz

480i, 480p

500mVrms

40W

<3W

LT-P1745/LT-P1745U

30 ~ 80kHz

50 ~ 75Hz

16.2 Million

1280 x 1024@60Hz

1280 x 1024@75Hz

H/V Separate, TTL, P or N

0.7 Vp-p @75 Ω

480i, 480p

500mVrms

45W

<3W

LT-P2045

28 ~ 33kHz

50 ~ 70Hz

16.7 Million

640 x 480@60Hz

640 x 480@70Hz

NTSC

CVBS, S-VHS, RGB

480i, 480p

500mVrms

AC 120V ~ 60Hz

55W

<3W

LT-P2045U

28 ~ 47kHz

50 ~ 75Hz

16.7 Million

800 x 600@60Hz

800 x 600@75Hz

480i, 480p

500mVrms

55W

<3W

14.18 x 2.53 x 13.33 inch

(360.2 x 64.2 x 338.6 mm)

14.18 x 7.59 x 15.61 inch

(360.2 x 192.9 x 396.5 mm)

16.40 x 2.82 x 15.46 inch

(416.7 x 71.8 x 392.9 mm)

16.40 x 7.59 x 16.68 inch

(416.7 x 192.9 x 423.8 mm)

18.86 x 2.94 x 17.18 inch

(479.0 x 74.7 x 436.4 mm)

18.86 x 8.90 x 18.23 inch

(479.0 x 226.0 x 463.0 mm)

18.86 x 2.94 x 17.18 inch

(479.0 x 74.7 x 436.4 mm)

18.86 x 8.90 x 18.23 inch

(479.0 x 226.0 x 463.0 mm)

Weight

With stand

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Audio Characteristics

Audio Input

PC Audio Input

Audio Output

Headphone Output

Frequency

Response

3.6 kg (7.94 lbs) 4.95 kg (10.91 lbs) 7.15 kg (15.76 lbs)

50°F to 104°F (10°C to 40°C)

10%to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5%to 95%, non-condensing

RCA Jack (L, R), 0.5Vrms(-9dB)

3.5

ø Stereo Jack, 0.5Vrms(-9dB)

2.5W x 2

Max.10mW Output(3.5

ø Stereo Jack 32)

RF : 80Hz ~15kHz at -3dB

A/V : 80Hz ~20kHz at -3dB

7.45 kg (16.42 lbs)

English63

advertisement

Related manuals

advertisement

Table of contents