Samsung SNB 5000, SND 5080, SND 5080F, SNV 5080 Network Camera คู่มือผู้ใช้

Below you will find brief information for SNB-5000, SND-5080, SND-5080F, SNV-5080. These Samsung network cameras offer HD video quality, support multiple streaming codecs (H.264, MPEG-4, MJPEG), and various communication protocols. They feature alarm capabilities, intelligent video analysis, and ONVIF compliance. Monitor your surroundings remotely via web browser and utilize SD card recording.
PDF Download
Document
Network Camera
SNB-5000/SND-5080/SND-5080F/SNV-5080
User Manual
Before installing and operating this product, please read this manual thoroughly.
English
overview
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat reaisters, stoves, or other
apparatus (including ampliﬁers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug, A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety, If the provided plug does not ﬁt into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/ accessories speciﬁed by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table speciﬁed by
the manufacturer, or sold with the apparatus. When a cart is used.
Use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for
long periods of time.
14. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
2_ overview
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC
OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS
ON THE EQUIPMENT.
Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus
M OVERVIEW
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the product.
Class construction
An apparatus with CLASS construction shall be connected to a MAINS
socket outlet with a protective earthing connection.
Battery
Batteries(battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
English _3
overview
Disconnection Device
Disconnect the main plug from the apparatus, if it’s defected. And please call
a repair man in your location.
When used outside of the U.S., it may be used HAR code with fittings of
an approved agency is employed.
CAUTION
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do so.
The BNC output port is used to monitor the installation process of the
network camera.
If you keep the BNC cable connected, a risk of lightening may cause damage
or malfunction to the product.
4_ overview
Please read the following recommend safety precautions carefully.
Do not install on a surface where it is exposed to direct
sunlight, near heating equipment or heavy cold area.
Do not place this apparatus near.
Do not attempt to service this apparatus yourself.
Do not place a glass of water on the product.
Do not install near any magnetic sources.
Do not block any ventilation openings.
Do not place heavy items on the product.
User’s Manual is a guidance book how to use the products
The meaning of the using sign in the book is following
y Reference : In case of providing information for helping of product’s usages
y Notice : If there’s any possibility to occur any damages for the goods and
human caused by not following the instruction
&Uacute; Please read this manual for the safety before using of goods and keep it in
the safe place.
English _5
M OVERVIEW
Do not Place this apparatus on an uneven surface.
overview
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Samsung Techwin cares for the environment at all product manufacturing stages, and is
taking measures to provide customers with more environmentally friendly products.
The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly
products, and indicates that the product satisfies the EU RoHS Directive.
Correct Disposal of This Product (Waste Electrical &amp; Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate these items from other
types of waste and recycle them responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with other
commercial wastes for disposal.
6_ overview
CONTENTS
OVERVIEW
INSTALLATION &amp; CONNECTION
24
Important Safety Instructions
Product Features
Recomended PC Speciﬁcations
What’s Included
At a Glance (SNB-5000)
At a Glance (SND-5080)
At a Glance (SND-5080F)
At a Glance (SNV-5080)
24
26
28
32
33
Installation (SND-5080)
Installation (SND-5080F)
Installation (SNV-5080)
Mounting the Lens
Inserting/Removing an SD
Memory Card
Memory Card Information (Not
Included)
Connecting with other Device
36
37
NETWORK CONNECTION
AND SETUP
42
42
43
44
45
46
47
50
51
52
52
Connecting the Camera Directly
to Local Area Networking
Connecting the Camera Directly
to a DHCP Based DSL/Cable
Modem
Connecting the Camera Directly
to a PPPoE Modem
Connecting the Camera to an
IP Router with the PPPoE/Cable
Modem
IP Address Setup
Static IP Setup
Dynamic IP Setup
Port Range Forward (Port
Mapping) Setup
Connecting to the Camera from a
Shared Local PC
Connecting to the Camera from a
Remote PC via the Internet
English _7
M OVERVIEW
2
2
9
9
10
12
15
18
21
overview
CAMERA SETUP
53
WEB VIEWER
62
SETUP SCREEN
70
APPENDIX
87
8_ overview
53
53
How to use the Menu Key
Camera Menu Setup
62
63
64
66
67
68
Connecting to the Camera
Login
Installing Silverlight Runtime
Using the Live Screen
Using OSD Screen Menu
Playback
70
70
73
77
83
Setup
Audio &amp; Video Setup
Network Setup
Event Setup
System Setup
87
89
91
93
Camera Speciﬁcation
Network Speciﬁcation
Troubleshooting
GPL/LGPL Software License
PRODUCT FEATURES
RECOMENDED PC SPECIFICATIONS
y CPU : Pentium4 / 2.4GHz or higher
y Operating System : Windows XP, VISTA, 7
Mac OS
y Resolution : 1280X1024 pixels or higher
y RAM : 1GB or higher
y Web Browser : Internet Explorer 7.0 or higher
Firefox, Google Chrome, Safari
y Video Memory : 128MB or higher
English _9
M OVERVIEW
y HD Video Quality
Supports up to 1.3 mega pixels of HD video quality.
y H.264/MPEG-4/MJPEG Multi-Streaming
This network camera supports the H.264/MPEG-4/MJPEG codec and can display videos
in different resolutions and qualities simultaneously with different Codecs.
y Support various communication protocols
Supports TCP/IP, UDP, RTP/RTSP, email, and FTP protocols as well as various
internet protocols such as ARP, HTTP, HTTPS and DHCP.
y Web Browser-based Monitoring
Using the Internet web browser to display the image in a local network environment.
y Alarm
If an event occurs, the event-related video will be transferred to the FTP/email speciﬁed by
the user or saved to the SD memory, or the event signal will be sent to the ALARM OUT
port.
y Intelligent Video Analysis
Analyzes the event video according to the user-speciﬁed rules to recognize the event.
y ONVIF (Spec 1.01) Compliance
This product supports ONVIF Core Spec. 1. 01.
For more information, refer to www.onvif.org.
overview
WHAT’S INCLUDED
Please check if your camera and accessories are all included in the product package.
Appearance
10_ overview
Item Name
Quantity
Description
Model Name
User Manual/
IP Installer DVD
1
User Manual
1
Power Adapter
1
Used for connecting to the power
source
Jack Modular
1
LAN cable gender
Cable for the testing
monitor
1
Used to test the camera connection
to a portable display device
Alarm Cable
1
Used to connect to Alarm I/O
Template
1
Product installation guide
SND-5080F
SNV-5080
Iron Screw
3
Used for fixing to an iron plate
SND-5080/5080F
Dustproof Plate
1
Preventing dust inflow
SND-5080
SNB-5000
SND-5080/5080F
SNV-5080
SND-5080/5080F
SNV-5080
Appearance
Quantity
Description
C Mount Adapter
Auto Iris Lens
Connector
1
Used to install the camera lens
Camera Holder
(Mount)
1
Used to install the camera holder
Camera Holder
(Mount) Screws
2
Used to install the mount
ASSY-Screw Tapping
4
Used for installation on the wall or
ceiling
L Wrench
1
Used to remove/fix the dome cover
Plastic Anchor
4
For fixing a screw, Inserted in a hole
(reinforced anchoring force)
Model Name
SNB-5000
M OVERVIEW
Item Name
SNV-5080
Tapping Screw
SND-5080F
Bracket Safety
Lens Options (not included)
CS Lens
Optional lens to be inserted in a
camera
SNB-5000
C Lens
M
 The Test Monitor Cable is connected to a portable displayer and used for testing the camera.
If you intend to use it for an actual monitoring camera, use the BNC cable instead.
English _11
overview
AT A GLANCE (SNB-5000)
Front Side
SNB-50
www.sam 00
sungcc
tv.c
om
Item
M
Description
Camera Holder
(Mount) Holes
Used when you mount the camera onto the bracket by fixing the camera
holder (mount) adaptor with the bracket.
Auto Iris Lens
(Optional)
Installed on the lens adaptor.
Auto Iris Lens
Connector
Used to supply power and output signal to control the iris of the lens.
 Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied
ethanol.
12_ overview
Rear Side
AUDIO OUT AUDIO IN
SD CARD
SD
SYSTEM POWER
1 2 3 4 5
1 : ALARM IN 4 : 2 : ALARM OUT 5 : GND
3 : ALARM COM
Item
SD Memory Card
Compartment
M OVERVIEW
VIDEO
RESET
NETWORK
ACT
LINK
GND
AC 24V
DC 12V
Description
Compartment for the SD memory card.
AUDIO OUT
Terminal for audio output.
AUDIO IN
Terminal for audio input.
Audio terminal
ON : A memory card is inserted and operates normally.
SD
Flashing : Failed to record, insufficient space, or inserted
abnormally.
OFF : Camera is off, camera is restarting, or memory card is
not in place.
System, Power,
SD Indicators
ON : The camera is turned on and connected to the network
properly.
SYSTEM
Blinking : During DDNS setup, or in case of setup failure, or
in a state of unstable network connection
OFF : When the system is rebooting, or turned off
POWER
ON : While the power is on
OFF : If the power is off
English _13
overview
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
Reset Button
J Resetting the camera requires reconfiguration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.
Power Port
Used to plug the power cable.
GND
Used for earth-grounding.
Network Port
Used to connect a PoE or LAN cable.
ALARM IN
Used to connect the alarm input signal.
ALARM OUT
Used to connect the alarm output signal.
I/O Port
ALARM COM Common port where the alarm output signal is connected.
GND
Video Out Port
14_ overview
Used for earth-grounding.
Video signal output port connected to the monitor.
AT A GLANCE (SND-5080)
Appearance
M OVERVIEW
Item
Description
Dome Cover
Dome cover for the lens and unit protection.
Main unit
Main unit includes the lens, switch board, PCB boards and screws.
Power Port
Used to plug the power cable.
Video Out Port
Video signal output port connected to the monitor.
Network Port
Used to connect a PoE or LAN cable.
Audio In Jack
Used to connect to a microphone.
Audio Out Jack
Used to connect to speakers.
English _15
overview
Inside
3
Item
Alarm In / Out
terminals
SD Memory Card
Compartment
Description
ALARM IN
Used to connect the alarm input signal.
ALARM OUT
Used to connect the alarm output signal.
ALARM COM
Common port where the alarm output signal is connected.
GND
Used for earth-grounding.
Compartment for the SD memory card.
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
Reset Button
16_ overview
J Resetting the camera requires reconfiguration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.
Components
1
2
7
8
Item
Description
Inner Cover
Cover for the main unit’s protection.
Side wing hooks
By lifting it while gently pressing the both ends, you can separate the inner
cover.
ZOOM lever
Turn the barrel left or right to adjust the zoom, and turn the knob clockwise
to lock the zoom.
Focus lever
Turn the barrel left or right to adjust the focus, and turn the knob clockwise
to lock the focus.
SD Memory Card
Compartment
Compartment for the SD memory card.
Monitor Out
Using the test monitor cable, you can connect to a mobile display for camera
test.
7
Wiring Cover
If you drill a hole in the wiring cover for wiring,
remove the cover and attach the provided dustproof
plate to it, and arrange the cables through the plate.
The dust-proof plate is to prevent outside dust from
inflow to the wiring compartment.
8
Lock Release
To separate the bracket from the main unit for the installation or to separate
the camera from an installed camera, push this release and turn the main
unit in the marked direction of &lt;UNLOCK&gt;.
6
English _17
M OVERVIEW
3
4
5
6
overview
AT A GLANCE (SND-5080F)
Appearance
Item
7
Description
Dome Cover
Dome cover for the lens and unit protection.
Main unit
Main unit includes the lens, switch board, PCB boards and screws.
Power Port
Used to plug the power cable.
Video Out Port
Video signal output port connected to the monitor.
Network Port
Used to connect a PoE or LAN cable.
Audio In Jack
Used to connect to a microphone.
Audio Out Jack
Used to connect to speakers.
18_ overview
Inside
M OVERVIEW
3
Item
Description
ALARM IN
Alarm In / Out
terminals
ALARM OUT Used to connect the alarm output signal.
ALARM COM Common port where the alarm output signal is connected.
GND
SD Memory Card
Compartment
Used to connect the alarm input signal.
Used for earth-grounding.
Compartment for the SD memory card.
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
Reset Button
J Resetting the camera requires reconfiguration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.
English _19
overview
Components
3
4
5
Item
Description
Inner Cover
Cover for the main unit’s protection.
Side wing hooks
By lifting it while gently pressing the both ends, you can separate the inner
cover.
ZOOM lever
Turn the barrel left or right to adjust the zoom, and turn the knob clockwise
to lock the zoom.
Focus lever
Turn the barrel left or right to adjust the focus, and turn the knob clockwise
to lock the focus.
Monitor Out
Using the test monitor cable, you can connect to a mobile display for camera
test.
20_ overview
AT A GLANCE (SNV-5080)
Appearance
M OVERVIEW
Item
Description
Dome Cover
Dome cover for the lens and unit protection.
Main unit
Main unit includes the lens, switch board, PCB boards and screws.
Power Port
Used to plug the power cable.
Video Out Port
Video signal output port connected to the monitor.
Network Port
Used to connect a PoE or LAN cable.
Audio In Jack
Used to connect to a microphone.
Audio Out Jack
Used to connect to speakers.
English _21
overview
Inside
3
Item
Description
ALARM IN
Alarm In / Out
terminals
ALARM OUT Used to connect the alarm output signal.
ALARM COM Common port where the alarm output signal is connected.
GND
SD Memory Card
Compartment
Used to connect the alarm input signal.
Used for earth-grounding.
Compartment for the SD memory card.
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
Reset Button
22_ overview
J Resetting the camera requires reconfiguration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.
Components
3
4
Item
Description
Inner Cover
Cover for the main unit’s protection.
Side wing hooks
By lifting it while gently pressing the both ends, you can separate the inner
cover.
ZOOM lever
Turn the barrel left or right to adjust the zoom, and turn the knob clockwise
to lock the zoom.
Focus lever
Turn the barrel left or right to adjust the focus, and turn the knob clockwise
to lock the focus.
Monitor Out
Using the test monitor cable, you can connect to a mobile display for camera
test.
English _23
M OVERVIEW
5
installation &amp; connection
INSTALLATION (SND-5080)
Precautions before installation
Ensure you read out the following instructions before installing the camera:
y Select an installation site (ceiling or wall) that can endure at least 5 times of the camera
weight.
y Stuck-in or peeled-off cables can cause damage to the product or a fire.
y For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
Installing the camera
1. Hold down the bottom lock lever while
removing the cover with the other hand.
Removing the cover reveals the main unit
and inner cover.
24_ installation &amp; connection
2. To ﬁx the camera position, hold down either
hook of the inner cover and lift it up.
M INSTALLATION &amp; CONNECTION
3. Push the release lock out while turning the main unit in
the &lt;UNLOCK&gt; direction to remove the bracket.
If this doesn't work, use the hole on the bottom of the
bracket to turn the bracket in the &lt;LOCK&gt;direction.
4. Use the provided screws (x3) to ﬁx the bracket to a
desired position (ceiling or wall).
 Ensure that the &lt;CAMERA FRONT&gt; label on the bracket faces
the direction for camera monitoring.
5. Arrange the cables through the bracket to the
ceiling or wall.
If you drill a hole in the ceiling cover for wiring,
press hard to remove the cover and attach the
dust-proof plate to it, and arrange the cables
through the plate. If you intend to arrange the
cables without drilling a hole, use the empty
area opposite to the &lt;CAMERA FRONT&gt;
label side for the wiring purpose.
6. Mount the main unit onto the bracket.
Align the marking hole of the main unit with the
&lt;CAMERA FRONT&gt; label of the bracket, and
turn the unit in the &lt;LOCK&gt; direction.
Wiring Cover
7. Adjust the lens in a desired direction.
For adjusting the lens direction, refer to &quot;Adjusting the monitoring direction for
the camera&quot;. (page 31)
8. Secure the inner cover to the main unit.
Fit the two holes of the wing-side locks on the inner cover into the corresponding
hole of the main unit, and press it down until you hear a click.
9. Fix the cover to the main unit.
Fit the protruding part inside the cover into the corresponding hole of the main unit,
and turn the cover to ﬁx it.
English _25
installation &amp; connection
INSTALLATION (SND-5080F)
Removing the dome cover
1. Hold down the bottom lock lever while removing
the cover with the other hand. Removing the
cover reveals the main unit and inner cover.
2. To ﬁx the camera position, hold down both
hooks of the inner cover while lifting it up.
Ceiling Mount
1. Use the provided template to drill one hole
for the camera, and one for the screw (5
mm in diameter, at least 35 mm in depth),
and insert the plastic anchor (HUR 5) to the
end of the screw hole.
2. Connect and arrange the necessary cables
(power, video, etc) lest that they should
be damaged or caught while installing the
camera.
26_ installation &amp; connection
3. Insert the camera assembly into the hole
so that it ﬁts to the camera hole, and ﬁx
the assembly using the assembly screw
tappings (TH, M4xL30). (x3)
4. Close the dome cover.
M INSTALLATION &amp; CONNECTION
5. Fix the cover to the main unit. Fit the
protruding part inside the cover into the
corresponding hole of the main unit, and
turn the cover to ﬁx it.
To add an alarm cable
1. For this, ﬁrst you should remove the dome
cover from the housing.
2. Pull out the protruding rubber bar as shown.
3. This will reveal a hole in the place of the rubber
bar, through which you insert the cable, and
connect it to the alarm terminal on the PCB.
4. Connect and arrange the necessary cables
(power, video, etc) lest that they should be
damaged or caught while installing the camera.
Then, install the camera assembly in the
reverse order of the disassembly.
5. Adjust the lens in a desired direction and close
the dome cover.
English _27
installation &amp; connection
INSTALLATION (SNV-5080)
Disassembling
To connect the alarm in/out, the dome cover and lens cover are to be separated.
1. Using the L-wrench provided, loosen 3
screws by turning them counterclockwise
and separate the dome cover.
2. Lift up the inner cover while gently pressing
its both ends to separate it from the unit.
28_ installation &amp; connection
Optional Accessories for Installation
For your easier installation, you can purchase appropriate optional accessories available.
1. WALL MOUNT ADAPTOR(SCX-300WM)/
HANGING MOUNT(SCX-300HM)
This adaptor is used when installing the dome
camera onto a wall.
M INSTALLATION &amp; CONNECTION
2. CEILING MOUNT ADAPTOR(SCX-300CM)/
HANGING MOUNT(SCX-300HM)
This adaptor is used when installing the dome
camera on a concrete ceiling.
3. POLE MOUNT ADAPTOR(SCX-300PM)
This is an adaptor for WALL MOUNT ADAPTOR
(SCX-300WM) installation on a pole whose
diameter is bigger than 80mm.
English _29
installation &amp; connection
4. CORNER MOUNT ADAPTOR (SCX-300KM)
This is an adaptor for WALL MOUNT
ADAPTOR (SCX-300WM) installation on the
corner of wall joint.
Installing on the ceiling directly
1. Using the L-wrench provided, loosen 3 screws
by turning them counterclockwise and separate
the dome cover.
2. Loosen 3 screws by turning them
counterclockwise, press both left and right lock
releases inwards (in arrow direction) to unlock
the stopper, and then separate the camera
from the case.
30_ installation &amp; connection
3. Drill holes (diameter 5mm, more than 35mm
deep) on the ceiling by matching to the holes
on the case bed, and insert plastic anchors
(HUD 5) fully into the holes. Fix the case bed
on the ceiling by using Tapping Screws (TH
M4xL30). (4 places)
5. Adjust the lens aiming to your desired direction.
6. Assemble the Dome Cover.
For waterproof purpose, ﬁx and secure the bolt using L-wrench provided.
M
 For the wall mounting installation and how to connect the alarm cables, refer to the installation
instructions of SND-5080F. (pages 26~27)
Adjusting the monitoring direction for the camera (SND-5080/SND5080F/SNV-5080)
Panning
Tilting
Lens rotation
You can adjust the camera direction only when the camera is fixed on the ceiling.
Then, turning the camera to the left or right is referred to as &quot;Panning&quot;, while tilting the
angle is &quot;Tilting&quot;. For panning, the panning limit is 220&deg; for the clockwise, and 120&deg; for the
counterclockwise, a total of 340&deg; enabled; further rotation is stopped by the stopper.
English _31
M INSTALLATION &amp; CONNECTION
4. Connect power and video cables and arrange cable running not to damage or
squeeze them, and assemble the camera unit in the reverse way.
installation &amp; connection
MOUNTING THE LENS
Disconnect the power before proceeding.
M
 The C lens and CS lens are not included in the product package.
You must use the mega lens only for this purpose.
Mounting the CS lens
Turn the optional CS lens clockwise to insert it.
SNB-50
www.sam 00
sungcc
tv.c
om
CS Lens
Mounting the C lens
Turn the C mount adaptor clockwise to insert it and do the same with the C lens.
SNB-50
www.sam 00
sungcc
tv.c
om
32_ installation &amp; connection
C Lens
Connecting the Auto Iris Lens connector
Insert the lens connector into the corresponding hole of the camera.
www.sam 00
sungcc
tv.c
om
Focusing
Turn the lens left or right to control the zoom and focus the lens so that you can view a clear,
sharp object.
INSERTING/REMOVING AN SD MEMORY CARD
Inserting an SD Memory Card
Push the SD memory card in the direction of the arrow shown in the diagram.
000 .com
SNB-5msungcctv
www.sa
English _33
M INSTALLATION &amp; CONNECTION
SNB-50
installation &amp; connection
J
 Do not insert the SD memory card while it’s upside down by force. Otherwise, it may damage the
SD memory card.
Removing an SD Memory Card
Gently press down on the exposed end of the memory card as shown in the diagram to
eject the memory card from the slot.
000 .com
SNB-5msungcctv
www.sa
34_ installation &amp; connection
M INSTALLATION &amp; CONNECTION
J
 Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the
slot when released.
 To remove the SD memory card, set &lt;Record&gt; to OFF from &lt;SD Record&gt; and press [Apply].
(page 78)
 If you saved data in the SD memory card, removing the SD memory card will cause damage to
the data stored in the card.
 If the SD memory is inserted, the SD LED indicator on the rear of the camera will turn on.
 If there occurs a problem in the SD memory, the SD LED indicator will blink.
English _35
installation &amp; connection
MEMORY CARD INFORMATION (NOT INCLUDED)
What is a memory card?
The memory card is an external data storage device that has been developed to offer an
entirely new way to record and share video, audio, and text data using digital devices.
Selecting a memory card that’s suitable for you
Your camera supports SDHC memory cards.
You may, however, experience compatibility issues depending on the model and make of
the memory card.
For your camera, we recommend you use a memory card from the following
manufacturers:
SDHC/SD Memory Card : Sandisk, Transcend, Kingston
Your camera supports 2GMB to 32GB of memory card capacity.
Playback performance can be affected depending on the speed of memory card, so use
the high-speed memory card.
To ensure proper recording of video data, we recommend you use a memory card that
supports at least read/write speed 10Mbps and Class 6.
Memory Card Use
SD and SDHC memory cards feature a switch that disables writing data on to the media.
Having this switch to the Lock position will prevent accidental deletion of data stored in the
memory card but at the same time will also prevent you from writing data on to the media.
W Memory Card Components
Contacts
Lock Switch
SD/SDHC
36_ installation &amp; connection
CONNECTING WITH OTHER DEVICE
SD
M INSTALLATION &amp; CONNECTION
AUDIO OUT AUDIO IN
Monitor
SD CARD
SYSTEM POWER
VIDEO
RESET
1 2 3 4 5
1 : ALARM IN 4 : 2 : ALARM OUT 5 : GND
3 : ALARM COM
NETWORK
ACT
LINK
GND
AC 24V
DC 12V
Power
Network
Monitor Out
Power
Monitor
Network
English _37
installation &amp; connection
Connecting to the monitor
Connect the [VIDEO] port of the camera to the video input port of the monitor.
M
 In the initial installation of the camera, you can connect the camera to the monitor for checking
the connection status.
You must set &lt;Video Output&gt; to &lt;ON&gt; before the display screen can be activated. (page 72)
 Connect the monitor test cable to the output port of the monitor.
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
Power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
J
 Be careful not to reverse the polarity when you connect the power cable.
M
 The instructions above are also applied to SND-5080/SND-5080F/SNV-5080.
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
38_ installation &amp; connection
Connecting to Audio Input/Output
Microphone
Network
00 tv.com
SNB-am50sungcc
www.s
Speaker
Amp
Amp
Microphone
Amp
Microphone
Microphone
Speaker
Amp
English _39
M INSTALLATION &amp; CONNECTION
PC
installation &amp; connection
1. Connect the AUDIO IN port of the camera with the microphone directly or LINE OUT
port of the ampliﬁer that the microphone is connected to.
2. Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker.
3. Check the speciﬁcations for audio input.
y Audio Codec
G.711 PCM. μ-law 64kbps 8kHz sampling
y Full duplex Audio
y Audio in
Used for mono signal line input (Max.2.4 Vpp)
y Audio out
Used for mono signal line output (Max.2.4 Vpp)
y Line out impedance
600
Alarm I/O Wiring Diagram
ALARM IN
1
ALARM OUT
2
ALARM COM
3
4
GND
5
40_ installation &amp; connection
(5mA sink)
(30VDC 2A,
125VAC 0.5A MAX)
Connecting to the I/O port box
Connect the Alarm I/O signal to the corresponding port of the rear port box.
AUDIO OUT AUDIO IN
1 2 3 4 5
SD CARD
SD
SYSTEM POWER
RESET
1 2 3 4 5
1 : ALARM IN 4 : 2 : ALARM OUT 5 : GND
3 : ALARM COM
1 : ALARM IN 4 : 2 : ALARM OUT 5 : GND
3 : ALARM COM
NETWORK
ACT
LINK
GND
AC 24V
DC 12V
&lt;SNB-5000&gt;
5 4 3 2 1
1 : ALARM IN 4 : 2 : ALARM OUT 5 : GND
3 : ALARM COM
&lt;SND-5080/SND-5080F/SNV-5080&gt;
y
y
y
y
ALARM IN : Used to connect the alarm input signal.
ALARM OUT : Used to connect the alarm output signal.
ALARM COM : Common port where the alarm output signal is connected.
GND : Used for earth-grounding.
English _41
M INSTALLATION &amp; CONNECTION
VIDEO
network connection and setup
You can set up the network settings according to your network configurations.
CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA
NETWORKING
Connecting to the camera from a local PC in the LAN
1. Launch an Internet browser on the local PC.
2. Enter the IP address of the camera in the address bar of the browser.
SNB-50
www.samsu00
ngcctv.com
Camera
INTERNET
SNB-50
www.samsu00
ngcctv.com
Camera
Local PC
External Remote PC
Firewall
DDNS Server
(Data Center, KOREA)
&lt;Local Network&gt;
M
 A remote PC in an external Internet out of the LAN network may not be able to connect to the
camera installed in the intranet if the port-forwarding is not properly set or a ﬁrewall is set.
In this case, to resolve the problem, contact your network administrator.
42_ network connection and setup
CONNECTING THE CAMERA DIRECTLY TO A DHCP
BASED DSL/CABLE MODEM
INTERNET
SNB-50
www.samsu00
ngcctv.com
DSL/Cable
Modem
External Remote PC
Camera
1. Use the cross LAN cable to connect the network cable directly to your PC.
2. Run the IP Installer and change the IP address of the camera so that you can use
the web browser on your desktop to connect to the Internet.
3. Use the Internet browser to connect to the camera.
4. Move to [Setup] page.
5. Move to [Network] – [DDNS] and conﬁgure the DDNS settings.
6. Move to [Network] – [Interface], and set the network type to [DHCP].
7. Connect the camera, which was removed from your PC, directly to the modem.
8. Restart the camera.
M
 For registering the DDNS settings, refer to &quot;DDNS&quot;. (page 74)
 For conﬁguring the DDNS settings, refer to &quot;Registering with DDNS&quot;. (page 76)
 For setting the network type, refer to &quot;Interface&quot;. (page 73)
English _43
M NETWORK CONNECTION AND SETUP
DDNS Server
(Data Center, KOREA)
network connection and setup
CONNECTING THE CAMERA DIRECTLY TO A PPPOE
MODEM
INTERNET
SNB-50
www.samsu00
ngcctv.com
PPPoE Modem
External Remote PC
Camera
DDNS Server
(Data Center, KOREA)
1. Use the cross LAN cable to connect the network cable directly to your PC.
2. Run the IP Installer and change the IP address of the camera so that you can use
the web browser on your desktop to connect to the Internet.
3. Use the Internet browser to connect to the camera.
4. Move to [Setup] page.
5. Move to [Network] – [DDNS] and conﬁgure the DDNS settings.
6. Move to [Network] – [Interface], and set the network type to [PPPoE].
7. Connect the camera, which was removed from your PC, directly to the modem.
8. Restart the camera.
M
 For registering the DDNS settings, refer to &quot;DDNS&quot;. (page 74)
 For conﬁguring the DDNS settings, refer to &quot;Registering with DDNS&quot;. (page 76)
 For setting the network type, refer to &quot;Interface&quot;. (page 73)
44_ network connection and setup
CONNECTING THE CAMERA TO AN IP ROUTER WITH THE
PPPOE/CABLE MODEM
This is for a small network environment such as homes, SOHO and ordinary shops.
SNB-50
www.samsu00
ngcctv.com
INTERNET
www.samsu00
ngcctv.com
Camera
IP Router
PPPoE or
Cable Modem
PPPoE or
Cable Modem
External Remote
PC
Local PC
DDNS Server
(Data Center, KOREA)
Configuring the network settings of the local PC connected to an
IP router
Configuring the network settings of the local PC connected to an IP router, follow the
instructions below.
y Select : &lt;Network Neighborhood&gt;  &lt;Properties&gt;  &lt;Local Area
Connection&gt;  &lt;Properties&gt;  &lt;General&gt;  &lt;Internet Protocol (TCP/IP)&gt; 
&lt;Properties&gt;  &lt;Obtain an IP address automatically&gt; or &lt;Use the following IP
address&gt;.
y Follow the instructions below if you select &lt;Use the following IP address&gt;:
ex1) If the address (LAN IP) of the IP router is 192.168.1.1
IP address : 192.168.1.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
ex2) If the address (LAN IP) of the IP router is 192.168.0.1
IP address : 192.168.0.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1
IP address : 192.168.xxx.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.xxx.1
M
 For the address of the IP router, refer to the product’s documentation.
English _45
M NETWORK CONNECTION AND SETUP
Camera
SNB-50
network connection and setup
IP ADDRESS SETUP
Buttons used in IP Installer
Item
Description
Device Name
Model name of the connected camera.
Click the column to sort the list by model name.
However, search will be stopped if clicked during the search.
Mode
Displays either &lt;Static&gt; or &lt;Dynamic&gt; for the current network connection
status.
MAC(Ethernet)
Address
Ethernet address for the connected camera.
Click the column to sort the list by Ethernet address.
However, search will be stopped if clicked during the search.
IP Address
IP address.
Click the column to sort the list by IP address.
However, search will be stopped if clicked during the search.
The factory default is &quot;192.168.1.100&quot;
Protocol
Network setting for the camera.
The factory default is &quot;IPv4&quot;.
Cameras with the IPv6 setting will be displayed &quot;IPv6&quot;.
46_ network connection and setup
This function is not currently implemented.
URL
DDNS URL address enabling access from the external Internet.
However, this will be replaced with the &lt;IP Address&gt; of the camera if
DDNS registration has failed.
IPv4
Scans for cameras with the IPv4 setting.
IPv6
Scans for cameras with the IPv6 setting.
Search
Scans for cameras that are currently connected to the network.
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
Auto Set
&lt;IP Installer&gt; will automatically configure the network settings for you.
Manual Set
You should configure the network settings manually.
Exit
Exits the IP Installer program.
STATIC IP SETUP
Manual Network Setup
Run &lt;IP Installer.exe&gt; to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
M
 For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
1. Select a camera in the search list.
Find the MAC (Ethernet) address
labeled on the rear of the camera.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
2. Click [Manual Set].
The Manual Setting dialog appears.
The default values of &lt;IP Address&gt;,
&lt;Subnet Mask&gt;, &lt;Gateway&gt;, &lt;HTTP Port&gt; and &lt;VNP Port&gt; of the camera will
be displayed.
The default &lt;Password&gt; is 4321.
English _47
M NETWORK CONNECTION AND SETUP
UPnP Status
network connection and setup
3. In the &lt;Address&gt; pane, provide the
necessary information.
MAC (Ethernet) Address : The MAC
(Ethernet) address of the applicable
camera will be set automatically so you
don't need to input it manually.
If using an IP router
y IP Address : Enter an address falling in
the IP range provided by the IP router.
ex) 192.168.1.2~254,
192.168.0.2~254,
192.168.XXX.2~254
y Subnet Mask : The &lt;Subnet Mask&gt; of
the IP router will be the &lt;Subnet Mask&gt;
of the camera.
y Gateway : The &lt;Local IP Address&gt; of
the IP router will be the &lt;Gateway&gt; of the camera.
M
 The settings may differ depending on the connected IP router model.
For more information, refer to the user manual of the applicable router.
If not using an IP router :
For setting &lt;IP Address&gt;, &lt;Subnet Mask&gt;, and &lt;Gateway&gt;, contact your network
administrator.
4. In the &lt;Port&gt; pane, provide
necessary information.
y HTTP Port : Used to access the
camera using the Internet browser,
defaulted to 80. Use the spin button
to change the HTTP Port value.
y VNP Port : Used to control the video
signal transfer, defaulted to 4520.
5. Enter the password.
This is the login password for the &quot;admin&quot; user who accesses the camera.
The default password is &quot;4321&quot;.
6. Click [OK].
Manual network setup will be completed.
7. When the manual setup including &lt;IP&gt; is completed, the camera will restart.
48_ network connection and setup
If the IP router has more than one camera connected
Configure the IP related settings and the Port related settings distinctly with each other.
Category
Camera #1
Camera #2
IP Address
Subnet Mask
Gateway
192.168.1.200
255.255.255.0
192.168.1.1
192.168.1.201
255.255.255.0
192.168.1.1
Port related settings
HTTP Port
VNP Port
80
4520
10000
4530
M
 If the &lt;HTTP Port&gt; is set other than 80, you must provide the &lt;Port&gt; number in the address
bar of the Internet browser before you can access the camera.
ex) http://IP address : HTTP Port
http://192.168.1.201:10000
Auto Network Setup
Run &lt;IP Installer.exe&gt; to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
M
 For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
1. Select a camera in the search list.
Find the MAC (Ethernet) address labeled
on the rear of the camera.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
2. Click [Auto Set].
The Auto Setting dialog appears.
The &lt;IP Address&gt;, &lt;Subnet Mask&gt;,
and &lt;Gateway&gt; will be set automatically.
3. Enter the password.
This is the login password for the
&quot;admin&quot; user who accesses the
camera. The default password is
&quot;4321&quot;.
4. Click [OK].
Auto network setup will be completed.
5. The camera will automatically complete
the network setting and restart.
English _49
M NETWORK CONNECTION AND SETUP
IP related settings
network connection and setup
DYNAMIC IP SETUP
Dynamic IP Environment Setup
y Example of the dynamic IP environment
- If an IP router, with cameras connected, is assigned an IP address by the DHCP
server
- If connecting the camera directly to modem using the DHCP protocols
- If IPs are assigned by the internal DHCP server via the LAN
Checking the dynamic IP
1. From a local PC, run &lt;IP Installer&gt; to
display a list of cameras that are
assigned &lt;Dynamic IP&gt;.
2. Select a camera in the list, and click
[Manual Set] to check the &lt;Dynamic
IP&gt; of the camera.
If you uncheck &lt;DHCP&gt;, you can
change &lt;IP&gt; or &lt;Port&gt; to &lt;Static&gt;.
50_ network connection and setup
PORT RANGE FORWARD (PORT MAPPING) SETUP
If you have installed an IP router with a camera connected, you must set the port range
forwarding on the IP router so that a remote PC can access the camera in it.
Manual Port Range Forwarding
M NETWORK CONNECTION AND SETUP
1. From the Setup menu of the IP router,
select &lt;Applications &amp; Gaming&gt; &lt;Port Range Forward&gt;.
For setting the port range forward for
a third-party IP router, refer to the user
guide of that IP router.
2. Select &lt;TCP&gt; and &lt;UDP Port&gt; for
each connected camera to the IP
router.
Each port number for the IP router
should match that speciﬁed in
&lt;Netwok&gt; - &lt;IP&gt; from the camera's
Setup menu.
3. When done, click [Save Settings].
Your settings will be saved.
M
 The settings may differ depending on the
connected IP router model.
For more information, refer to the user
manual of the applicable router.
English _51
network connection and setup
CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC
1. Launch &lt;IP Installer&gt;.
It will scan for connected cameras and
display a list of them.
2. Double-click a camera to access.
The Internet browser starts and connects to the camera.
M
 You can also access the camera in such way you type the IP address of the found camera in the
address bar of the Internet browser.
CONNECTING TO THE CAMERA FROM A REMOTE PC VIA
THE INTERNET
As a remote PC can not directly access &lt;IP Installer&gt;, you should access the camera in the IP
router network using DDNS URL of the camera.
1. Before you can access a camera in the IP router network, you should have set the
port range forward for the IP router.
2. From the remote PC, launch the Internet browser and type the DDNS URL address
of the camera, or the IP address of the IP router in the address bar.
ex) http://www.samsungipolis.com/[Product ID]
52_ network connection and setup
camera setup
HOW TO USE THE MENU KEY
Follow the steps below if you run the Web Viewer for setting the menus.
1. Launch the Web Viewer.
M CAMERA SETUP
2. Click [Camera Menu (
)] in the left
corner of the Live screen.
The camera setup menu appears.
3. Use the Up/Down (▲/▼) buttons to move
to a desired item.
4. To change the value of a selected item,
use the Left/Right (◄/►) buttons.
To break down to a sub-menu structure,
)] on the selected item.
click [Enter (
: This arrow appears next to a menu that contains sub items.
J
 If &lt;IV analysis function&gt; is enabled, camera’s OSD menu operation can be set as an event.
CAMERA MENU SETUP
You can change the camera settings according to the environment where the camera is located.
SSDR (Samsung Super Dynamic Range) Setup
In a scene where the difference between bright and dark is severe, you can increase the
brightness of the dark area alone to regulate the overall brightness.
▲/▼ &Ouml; ◄/► &Ouml; ENTER &Ouml; ▲/▼ &Ouml; ◄/► &Ouml; ENTER
1. Move to &lt;SSDR&gt; and select &lt;ON&gt;.
MAIN SETUP
SSDR
WHITE BAL
BACKLIGHT
EXPOSURE
SPECIAL
EXIT
ON
ATW
OFF
English _53
camera setup
2. Conﬁgure the &lt;SSDR&gt; and &lt;D-RANGE&gt;
settings as necessary.
y SSDR : Adjust the level of the dynamic
range.
y D-RANGE : Select the amplitude area of
the dynamic range.
SSDR SETUP
SSDR
D-RANGE
RETURN
8
 
NARROW
3. When completed, select &lt;RETURN&gt; to
return to the previous screen.
White Balance Setup
You can correct the image colors based on white under any lighting conditions.
▲/▼ &Ouml; ◄/► &Ouml; ENTER &Ouml; ▲/▼ &Ouml; ◄/► &Ouml; ENTER
1. Move to &lt;WHITE BAL&gt; and select a
setting value.
MAIN SETUP
y ATW : Corrects the colors of the camera
SSDR
ON
video automatically.
WHITE BAL
ATW
BACKLIGHT
OFF
y MANUAL : You can adjust the red and
EXPOSURE
SPECIAL
blue gains of the camera video manually.
EXIT
y AWC l SET : Corrects the colors of the
camera video to be optimized to the
current lighting condition and screen
mode.
You may need readjustment if the lighting condition is changed.
Put the focus of the camera to a white paper and press the [Enter (
)] button.
y OUTDOOR : Automatically corrects the video colors of the camera to be
optimized to the outdoor environment.
y INDOOR : Automatically corrects the video colors of the camera to be optimized
to the indoor environment.
2. To adjust it manually, select
&lt;MANUAL&gt;.
3. Specify the &lt;RED&gt; and &lt;BLUE&gt; values
as necessary.
4. When completed, select &lt;RETURN&gt; to
return to the previous screen.
54_ camera setup
WHITE BAL MANUAL SETUP
RED
BLUE
RETURN
  529
  532
Custom Backlight Setup
You can specify a desired area on the video manually and set the area to be displayed
more clearly.
▲/▼ &Ouml; ◄/► &Ouml; ENTER &Ouml; ▲/▼/◄/► &Ouml; ENTER
1. Move to &lt;BACKLIGHT&gt;.
MAIN SETUP
SSDR
WHITE BAL
BACKLIGHT
EXPOSURE
SPECIAL
EXIT
3. Set the BLC &lt;LEVEL&gt;.
You can change the level to adjust the
brightness of the monitoring area.
4. Set the &lt;TOP, BOTTOM, LEFT, RIGHT&gt;
levels to specify the target area.
5. When completed, select &lt;RETURN&gt; to
return to the previous screen.
ON
ATW
BLC
BLC SETUP
LEVEL
TOP
BOTTOM
LEFT
RIGHT
RETURN
 
 
 
 
LOW
30
75
30
70
English _55
M CAMERA SETUP
2. Select &lt;BLC&gt;.
camera setup
HLC (Highlight Compensation) Setup
When a strong light such as streetlamp or headlight faces forward to the camera, you can
mask that exposed area in order to protect it from being saturated.
▲/▼ &Ouml; ◄/► &Ouml; ENTER &Ouml; ▲/▼ &Ouml; ◄/► &Ouml; ENTER
1. Select &lt;BACKLIGHT&gt;.
2. Select &lt;HLC&gt;.
MAIN SETUP
SSDR
WHITE BAL
BACKLIGHT
EXPOSURE
SPECIAL
EXIT
3. Set the &lt;LEVEL&gt; and the &lt;MASK
TONE&gt;.
y LEVEL : Adjust the brightness level so
as to remove the incoming highlight
from a speciﬁc condition.
y MASK TONE : Adjust the mask tone of
the highlighted area.
ON
ATW
HLC
HLC SETUP
LEVEL
MASK TONE
RETURN
MIDDLE
  7
4. When completed, select &lt;RETURN&gt; to
return to the previous screen.
M
 At night operation, this function will be activated only if the highlight comes from more than a
certain area in a dark environment.
 At night operation, HLC will not function in too a bright or too a dark scene.
56_ camera setup
Exposure Setup
You can adjust the exposure level of the camera.
▲/▼ &Ouml; ENTER &Ouml; ▲/▼/◄/► &Ouml; ENTER &Ouml; ▲/▼/◄/► &Ouml; ENTER
1. Move to &lt;EXPOSURE&gt; and select a
setting value.
MAIN SETUP
ON
ATW
OFF
2. Select each item and set it appropriately.
y BRIGHTNESS : Adjust the screen
EXPOSURE SETUP
brightness.
BRIGHTNESS
  50
y IRIS : If set to &lt;MANUAL&gt;, you can
IRIS
AUTO
SHUTTER
--adjust the iris of the camera manually.
AGC
HIGH
SSNR3
ON
y SHUTTER : Adjust the electronic shutter
SENS-UP
AUTO
of the camera.
RETURN
- MANUAL : Adjust the shutter speed of
the camera manually.
- A.FLK : This will prevent the screen from ﬂickering.
y AGC : Specify how to adjust the level according to the luminance.
- MANUAL : Adjust the screen brightness manually.
y SSNR3 : Adjust the noise reduction level.
SSNR3 LEVEL SETUP
LEVEL
RETURN
 
12
English _57
M CAMERA SETUP
SSDR
WHITE BAL
BACKLIGHT
EXPOSURE
SPECIAL
EXIT
camera setup
y SENS-UP : Automatically senses the
darkness level at night or in a low contrast
scene and extends the accumulation time
accordingly for a bright and sharp image.
SENS-UP LIMIT SETUP
LIMIT
RETURN
2X
 If you set the shutter mode to MANUAL/
FLICKERLESS, SENS-UP mode will be
deactivated.
 The greater the video accumulation factor is,
the brighter the screen is but the afterimage
of a moving object grows accordingly.
- AUTO : Set the work condition to Auto mode in a low contrast scene.
3. When completed, select &lt;RETURN&gt; to return to the previous screen.
Screen Display Setup
You can specify the camera title and the OSD color that will be displayed on the screen.
▲/▼ &Ouml; ◄/► &Ouml; ENTER &Ouml; ▲/▼ &Ouml; ◄/► &Ouml; ENTER
1. Select &lt;SPECIAL&gt;.
MAIN SETUP
SSDR
WHITE BAL
BACKLIGHT
EXPOSURE
SPECIAL
EXIT
ON
ATW
OFF
2. Select &lt;CAM TITLE&gt;.
SPECIAL SETUP
CAM TITLE
OSD COLOR
DAY/NIGHT
IMAGE ADJ
RETURN
58_ camera setup
OFF
WHITE
AUTO
3. Use alphanumeric characters in the list
and enter a desired title in the bottom
input line.
 You can enter up to 15 characters for the title.
_______________
M CAMERA SETUP
4. Select &lt;POS&gt; and specify where to
display the camera title.
When the camera title is displayed, use the
direction buttons to specify the position;
Click OK to return to the previous menu.
CAMERA TITLE SETUP
A BCD E F G H I J K L M
NO P Q R S T U V W X Y Z
abcde f g h i j k l m
_n o p q r s t u v w x y z
. 0123 45 6 789
I J CLR POS
END
5. When done, select &lt;END&gt;.
To cancel your input, select &lt;CLR&gt;.
6. When completed, select &lt;RETURN&gt; to return to the previous screen.
OSD Color
You can set the OSD color on the screen to your preference.
▲/▼ &Ouml; ENTER &Ouml; ▲/▼ &Ouml; ◄/► &Ouml; ENTER
1. Select &lt;SPECIAL&gt;.
MAIN SETUP
SSDR
WHITE BAL
BACKLIGHT
EXPOSURE
SPECIAL
EXIT
2. Move to &lt;OSD COLOR&gt; and select a
desired color.
3. When completed, select &lt;RETURN&gt; to
return to the previous screen.
ON
ATW
OFF
SPECIAL SETUP
CAM TITLE
OSD COLOR
DAY/NIGHT
IMAGE ADJ
RETURN
OFF
WHITE
AUTO
English _59
camera setup
Day/Night Mode Setup
You can switch the mode to adjust the black and white level as well as the colors.
▲/▼ &Ouml; ◄/► &Ouml; ENTER &Ouml; ▲/▼ &Ouml; ◄/► &Ouml; ENTER
1. Select &lt;SPECIAL&gt;.
MAIN SETUP
SSDR
WHITE BAL
BACKLIGHT
EXPOSURE
SPECIAL
EXIT
2. Select &lt;DAY/NIGHT&gt;, and specify a
desired mode setting value.
y AUTO : Displays in color mode during
normal daytime and switches to black
and white mode in a low contrast scene
at night.
Press the [Enter (
)] button to
adjust the switching interval between
the two modes.
ON
ATW
OFF
SPECIAL SETUP
CAM TITLE
OSD COLOR
DAY/NIGHT
IMAGE ADJ
RETURN
OFF
WHITE
AUTO
 If you set the AGC mode to OFF from
&lt;EXPOSURE&gt;, the AUTO DAY/NIGHT mode will be disabled accordingly.
- DWELL TIME : This is the time while
each applicable lighting condition is
DAY/NIGHT AUTO SETUP
kept in order to enable the switch
DWELL TIME
between day and night modes.
DURATION
RETURN
- DURATION : Adjust the brightness of
the lighting where the mode switch
occurs.
y COLOR : Always displays the video in
colors.
y BW : Always displays the video in black and white.
3. When completed, select &lt;RETURN&gt; to return to the previous screen.
60_ camera setup
5 SEC
SLOW
Image Adjustment
You can configure the sharpness, gamma level, and color settings of an image to your
preference.
▲/▼ &Ouml; ◄/► &Ouml; ENTER &Ouml; ▲/▼ &Ouml; ◄/► &Ouml; ENTER
1. Select &lt;SPECIAL&gt;.
MAIN SETUP
ON
ATW
OFF
2. Select &lt;IMAGE ADJ&gt;.
SPECIAL SETUP
CAM TITLE
OSD COLOR
DAY/NIGHT
IMAGE ADJ
RETURN
3. Select each item and set it appropriately.
If selecting &lt;SHARPNESS&gt;, you can
IMAGE SETUP
adjust the sharpness of the image.
SHARPNESS
y SHARPNESS : Adjust the overall sharpGAMMA
COLOR LEVEL

ness of the image.
RETURN
The higher the level is, the sharper
and clearer the outline of the image
becomes.
y GAMMA : Adjust the contrast of the
image.
y COLOR LEVEL : Adjust the color level of the image.
OFF
WHITE
AUTO
ON
0.45
50

4. When completed, select &lt;RETURN&gt; to return to the previous screen.
English _61
M CAMERA SETUP
SSDR
WHITE BAL
BACKLIGHT
EXPOSURE
SPECIAL
EXIT
web viewer
CONNECTING TO THE CAMERA
Normally, you would
1. Launch the Internet browser.
2. Type the IP address of the camera in
the address bar.
ex) • IP address (IPv4) : 192.168.1.100
 http://192.168.1.100
- the Login dialog should appear.
• IP address (IPv6) : 2001:230:abcd:
ffff:0000:0000:ffff:1111
 http://[2001:230:abcd:ffff:0000
:0000:ffff:1111]
If the HTTP port is other than 80
1. Launch the Internet browser.
2. Type the IP address and HTTP port number of the camera in the address bar.
ex) IP address : 192.168.1.100:Port number(10000)  http://192.168.1.100:10000
- the Login dialog should appear.
Using URL
1. Launch the Internet browser.
2. Type the DDNS URL of the camera in the address bar.
ex) URL address : http://www.samsungipolis.com/[Product ID]
- the Login dialog should appear.
62_ web viewer
To check the DDNS address
If the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE
modem, the IP address of your network will be changed each time you try to connect to
the ISP (Internet Service Provider) server.
If this is the case, you will not be informed of the IP address changed by DDNS.
LOGIN
The default user ID is &quot;admin&quot;, and the default password is &quot;4321&quot;.
1. Enter &quot;admin&quot; in the &lt;User Name&gt;
input box.
2. Enter &quot;4321&quot; in the &lt;Password&gt; input
box.
If the password is changed, enter the
changed password instead.
3. Click [OK].
If you have logged in successfully, you
will the Live Viewer screen.
M
 For security purposes, ensure that you change the password in &lt;System&gt; - &lt;User&gt;.
The administrator ID, &quot;admin&quot;, is ﬁxed and can not be changed.
 If you check the &quot;Save this password in your password list&quot; option when your input is done, you
will be logged in automatically without being prompted to enter the login information from next time
on.
J
 If you are using Internet Explorer 7.0 or 8.0 as the default web browser, you can view the best
quality image with a screen ratio of 100%. Reducing the ratio may cut the image on the borders.
English _63
M WEB VIEWER
Once you register a dynamic IP-based device with the DDNS server, you can easily check
the changed IP when you try to access the device.
To add the IP address to the &lt;DDNS&gt; server, visit www.samsungipolis.com and register
your device, and set the DDNS option to &lt;Samsung DDNS&gt; before providing the user ID
and password for the DDNS server.
web viewer
This network camera uses Microsoft Silverlight for displaying the video.
INSTALLING SILVERLIGHT RUNTIME
If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will
be redirected to the Silverlight Runtime installation page automatically when accessing the web
viewer.
1. Click &lt;Click Here&gt;.
2. When the ﬁle download dialog pops up,
click &lt;Run&gt;.
3. When the download is completed, click
&lt;Run&gt;.
4. The Silverlight Runtime installation page
will be displayed. &lt;Install now&gt; to
proceed with the installation.
64_ web viewer
5. When done, click &lt;Close&gt;.
J
M WEB VIEWER
6. Close and restart the web browser, and
try to access the Web Viewer.
When Siverlight Runtime is properly
installed, you will see the Live screen.
 For normal installation, set the Block
Popup setting as follows:
Internet Explorer l Tools l Block
Popup l Always allow popups from
the current site(A)
English _65
web viewer
USING THE LIVE SCREEN
Item
Description
Monitoring
Move to the monitoring screen.
Playback
Switch to the monitoring screen that plays recording data in the SD memory.
Setup
Move to the Setup screen.
Viewer Screen
Displays the Live video on the screen.
Alarm Output
Activate the Alarm Out port.
Audio
Display the audio Listen and Talk toggle button on the screen.
Reset Alarm
Reset the alarm output settings.
Camera Menu
Used to retrieve and customize the Camera Setup menu.
For selecting and saving each menu item, refer to &quot;How to use the menu key&quot;.
(page 53)
Digital PTZ
You can use the mouse wheel to activate the digital zooming.
Screen
Optimization,
Full Screen
Adjust the screen to the optimal size, and display the Full Screen icon on the Live
screen.
66_ web viewer
Capture
Saves the snapshot as an image file in the .jpeg or .bmp format.
Video Format
You can select a profile type in &lt;Video Profile&gt; under the &lt;Audio &amp; Video&gt; setup
menu.
To capture the snapshot
M WEB VIEWER
1. Click [
] on the scene to capture.
The Capture dialog should appear.
2. Click [Save] button.
The screenshot will be saved in the
speciﬁed path.
USING OSD SCREEN MENU
To toggle the audio sound
1. Click the [Audio (
)] button.
The corresponding button will be
displayed in the Viewer.
2. Click the button to listen to / mute the
sound as you wish.
This button operates as a toggle button.
To toggle the microphone sound
1. Click the [Mic (
)] button.
The corresponding button will be
displayed in the Viewer.
2. Click the button to start / stop talking.
This button operates as a toggle button.
Click the microphone button that pops
up on the screen to display the Silverlight installation screen.
To fit the full screen
)] button.
1. Click the [Full Screen (
The corresponding button will be displayed in the Viewer.
2. Click the button.
This will ﬁt the Viewer to the full screen.
3. To exit the full screen mode, press [Esc] on the keyboard.
English _67
web viewer
PLAYBACK
1. Click the [Playback (
)] button.
2. Specify the start time and end time of
your search.
3. Select a search type.
)] button.
4. Click the [Search (
The search results will be displayed in
the list.
5. Select a data item to play in the search
list.
6. Click the [Play (
)] button.
7. To stop playing the video, click [Stop
)].
(
To return to the search screen, click
)].
[Exit (
To capture the snapshot
] on the scene to capture.
1. Click [
The Capture dialog should appear.
2. Click [Save].
The screenshot will be saved in the
speciﬁed path.
J
 If you are using the Internet Explorer as
the default web browser, select &quot;ToolsInternet Options-Security&quot; and uncheck
&quot;Use protected mode&quot;.
68_ web viewer
To check the information of the searched video
Click the [About (
)] button.
To back up the searched video
M WEB VIEWER
1. Click [
] on the scene to back up.
The Capture dialog should appear.
2. Click [Save].
The screenshot will be backed up to the
specified path.
To download SlimPlayer
You can download SlimPlayer that is designed to play videos stored in your PC.
1. Click [SlimPlayer (
)].
You will see a download dialog where
you can specify the download path.
2. Specify the path with a proper ﬁle name
and click [Save].
3. Unzip the downloaded file and run the
executable.
English _69
setup screen
SETUP
You can configure the audio &amp; video, network, event and system settings of the camera in the
network.
1. In the Live screen, click &lt;Setup (
)&gt;.
2. The Setup screen appears.
AUDIO &amp; VIDEO SETUP
You can configure the audio &amp; video, network, event and system settings of the camera in the
network.
Video Profile
1. From the Setup menu, select the &lt;Audio
&amp; Video (
)&gt; tab.
2. Click &lt;Video Proﬁle&gt;.
3. Select a &lt;Video Proﬁle&gt; number.
4. Click the input box of each item and
enter / select a desired value.
 The context menu may differ depending on the
selected codec type.
y Default Proﬁle : This is the default
video proﬁle.
y Fixed Framerate Proﬁle : Fix the
frame rate of the selected proﬁle
regardless of the settings of other
proﬁles.
y E-mail/FTP Proﬁle : Video proﬁle to be transferred to the speciﬁed email or FTP
site.
 Only the MJPEG codec can be set as the E-mail/FTP Proﬁle.
y Record Proﬁle : This is the proﬁle that is applied to video recording.
5. When done, click [Apply].
70_ setup screen
To add a video profile
You can add as many codec as necessary so that a variety of profiles can be applied
according to the recording condition.
1. Select a proﬁle number.
2. Provide the name and select a codec.
3. Specify the conditions under which the codec will be applied.
y Target bitrate : Specify the bit rate at which you will transfer the video.
y Encoding priority : You can set the video transfer method to Framerate or
Compression.
y GOP size : Select a GOP size between 1 and 15.
y Proﬁle : The H.264 proﬁling method is ﬁxed to &lt;HIGH&gt;.
y Entropy coding : Reduce the possible compression loss due to encoding.
y Multicast (VNP) : Specify the use of the VNP protocol.
- IPv4 : Enter an IPv4 address with which you can connect to the IPv4 network.
- Port : Specify the video communication port.
- TTL : Set the TTL for the VNP packet.
y Multicast (RTP) : Specify the use of the RTP protocol.
- IPv4 : Enter an IPv4 address with which you can connect to the IPv4 network.
- Port : Specify the video communication port.
- TTL : You can set the TTL for the RTP packet.
What is GOP size?
GOP (Group of Pictures) is a set of video frames for MPEG4 and H.264 format
compression, indicating a collection of frames from the initial I-Frame (key frame) to the
next I-Frame. GOP consists of 2 kinds of frames: I-Frame and P-Frame.
I-Frame is the basic frame for the compression, also known as Key Frame, which
contains one complete image data. P-Frame contains only the data that has changed
from the preceding I-Frame.
You can set between 1 and 15 for the MPEG4 and H.264 CODEC.
English _71
M SETUP SCREEN
4. Specify the details of the selected codec including resolution and frame rate.
y Resolution : Set the video size of the MPEG4, H.264, and MJPEG ﬁles.
y Framerate : Specify the frame rate.
y Compression : Specify the compression rate of the video.
y Bitrate control : You can select either the ﬁxed bit rate or the variable one for the
compression type.
 If you set the resolution to 1280X1024, the maximum frame rate is 22 fps.
setup screen
Video Setup
1. From the Setup menu, select the
&lt;Audio &amp; Video (
)&gt; tab.
2. Click &lt;Video Setup&gt;.
3. Select a &lt;Video Source&gt; mode.
y Flip Mode : Turn upside down the
image that is captured by the
camera.
y Mirror Mode : Flip horizontal the
image that is captured by the
camera.
4. Click the input box of each item in
&lt;Privacy Area Conﬁguration&gt; and enter / select a desired value.
 You can set up to 12 privacy zones.
5. Set the &lt;Video Output&gt;.
– If you select &lt;OFF&gt;, the video signal will not be output via the VIDEO OUT port.
6. When done, click [Apply].
To set the privacy zone
You can specify a certain area of the camera video to be protected for your privacy.
1. Set it to &lt;Enable&gt;.
2. Place the cursor at a point in the video
and drag it to whatever you need.
3. Specify the &lt;Color&gt; that will ﬁll the
privacy area.
4. To cancel your selection, simply click
[Clear].
5. When done, click [Apply].
72_ setup screen
Audio Setup
You can configure the I/O settings of the audio source from the camera.
1. From the Setup menu, select the
)&gt; tab.
&lt;Audio &amp; Video (
2. Click &lt;Audio Setup&gt;.
M SETUP SCREEN
3. Adjust the audio I/O levels to your
preference.
y Audio-In : Set the audio input value.
y Audio - Out : Set the audio output
value.
4. When done, click [Apply].
NETWORK SETUP
Interface
1. From the Setup menu, select the
&lt;Network (
)&gt; tab.
2. Click &lt;Interface&gt;.
3. Set the &lt;Interface&gt; and &lt;IPv6 Setup&gt;
as necessary.
y IP Type : Select an IP connection
type.
- Manual : Specify the IP address,
Subnet Mask, Gateway, DNS1,
and DNS2.
- PPPoE : Specify the DNS1, DNS2, ID and password.
- DHCP : Specify the DNS1 and DNS2.
 If you set it to &lt;Manual&gt;, you should specify the IP, Subnet Mask, Gateway, DNS 1 &amp; 2 manually.
y
y
y
y
y
y
y
MAC Address : Shows the MAC address.
IP Address : Displays the current IP address.
Subnet Mask : Displays the &lt;Subnet Mask&gt; for the set IP.
Gateway : Displays the &lt;Gateway&gt; for the set IP.
DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
IPv6 Use : Specify the use of IPv6.
IPv6 Address : Obtains the IPv6 address to access the IPv6 network.
4. When done, click [Apply].
English _73
setup screen
Port
1. From the Setup menu, select the
&lt;Network (
)&gt; tab.
2. Select &lt;Port&gt;.
3. Type in each item in the Port menu as
necessary.
 Neither the port range between 0 and 1023
nor port 3702 is available.
y HTTP port : HTTP port used to
access the camera via the web
browser.
The default is 80(TCP).
y VNP Port : Set a port used to transfer video signals with the Samsung protocols.
y RTSP Port : Used to transfer videos in the RTSP mode; the default is 554.
y VIEWER Port : Used to transfer videos to the Web Viewer; the default is 4520.
 The port range of the Web Viewer is between 4502 and 4532. If the VNP port is with this effective
range, the Web Viewer port should be speciﬁed the same as the VNP port.
4. When done, click [Apply].
DDNS
DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of
a camera into a general Host Name so that the user can easily remember it.
1. From the Setup menu, select the
)&gt; tab.
&lt;Network (
2. Click &lt;DDNS&gt;.
3. Select &lt;DDNS&gt;.
4. Type in the DDNS items according to
the selected type.
y Samsung DDNS : Select this if you
use the DDNS server provided by
Samsung Techwin.
y Public DDNS : Select this if you use a public DDNS server.
- Host Name : Enter the name of the host (i.e., host name of Dyndns) that is
registered with the DDNS server.
74_ setup screen
- User Name : Enter the user name for the DDNS service. (i.e., user ID that is
registered with Dyndns)
- Password : Enter the password for the DDNS service. (i.e., password that is
registered with Dyndns)
5. When done, click [Apply].
IP Filtering
M SETUP SCREEN
You can create a list of IPs that you want to grant or deny access to them.
1. From the Setup menu, select the
&lt;Network (
)&gt; tab.
2. Click &lt;IP ﬁltering&gt;.
3. Select a &lt;Filtering Type&gt;.
y Deny : If selecting this, access from
those IPs that are added to the
ﬁltering will be restricted.
y Allow : If selecting this, access from
only those IPs that are added to the
ﬁltering will be accepted.
4. Provide the IP that you want to grant or
deny access from.
5. When done, click [Apply].
SSL
You can select a secure connection system or install the public certificate for this purpose.
1. From the Setup menu, select the
)&gt; tab.
&lt;Network (
2. Click &lt;SSL&gt;.
3. Select a secure connection system.
 To access the camera using HTTPS mode,
you have to type the IP address for the camera
in the form of “https://&lt;Camera_IP&gt;”.
4. Search for the public certiﬁcate that you
want to install on the camera.
To install the certiﬁcate on the camera, you need to provide a certiﬁcate name (it can
be arbitrarily assigned by the user), certiﬁcate ﬁle issued from the certiﬁcation authority and a key ﬁle.
 The &lt;HTTPS(Secure connection mode using the public certiﬁcate)&gt; item will be active only if
there exists a public certiﬁcate installed.
5. When done, click [Apply].
English _75
setup screen
Registering with DDNS
To register your product with the Samsung DDNS
1. Visit the iPOLiS web site(www.
samsungipolis.com) and sign in with a
registered account.
2. From the top menu bar, select &lt;DDNS
SERVICE&gt;-&lt;MY DDNS&gt;.
3. Click [PRODUCT REGISTRATION].
4. Enter the product domain.
 You must perform the duplicate check for the
domain that you entered.
5. Select a &lt;CLASSIFICATION&gt; and
specify the &lt;MODEL NUMBER&gt;.
6. Specify the product location with a
description if necessary.
7. Click [REGISTRATION].
The product will be added to the product list that you can check.
76_ setup screen
To connect to the Samsung DDNS in camera setup
1. From the DDNS setup page, set &lt;DDNS&gt; to &lt;Samsung DDNS&gt;.
2. Provide the &lt;User Name&gt; and &lt;Password&gt; that you registered with the DDNS
site.
M SETUP SCREEN
3. Click [Apply].
When the connection is successfully
made, you will see the message of
&lt;Success&gt; on the screen.
EVENT SETUP
FTP/Email
You can configure the FTP/Email server settings so that you can transfer the images stored
in the camera to your PC if an event occurs.
1. From the Setup menu, select the
&lt;Event (
)&gt; tab.
2. Click &lt;FTP/Email&gt;.
3. Select &lt;FTP Conﬁguration&gt; or
&lt;Email Conﬁguration&gt; and enter /
select a desired value.
y FTP Conﬁguration
- Server Address : Enter the IP address of the FTP server that you
transfer the alarm images to.
- User ID : Enter the user ID with
which you will log in to the FTP
server.
- Password : Enter the user account password for logging into the FTP server.
- Upload Directory : Specify the FTP path where you will transfer the alarm
images.
- Port : The default port of the FTP server is 21; however, you can use a different
port number according to the FTP server settings.
- Passive Mode : Select &lt;On&gt; if you need to connect in passive mode due to the
ﬁrewall or the FTP server settings.
English _77
setup screen
y Email Conﬁguration
- Server Address : Enter the IP address of the email server that you use for the
email transfer.
ex) SMTP. hotmail. com
- User ID : Enter the user ID for logging into the email server.
- Password : Enter the user account password for logging into the email server.
- Port : The default port of the email server is 25; however, you can use a different
port number according to the email server settings.
- Recipient : Enter the address of the email recipient.
- Sender : Enter the address of the email sender. If the sender address is incorrect, the email from the sender may be classiﬁed as SPAM by the email server
and thus may not be sent.
- Subject : Enter a subject for your email.
- Body : Provide the text for the massage. Attach the alarm images to the email
that you are preparing.
4. When done, click [Apply].
SD Record
You can set the record conditions or the use of recording for the SD memory, check the
size of stored data, or format the SD memory itself.
1. From the Setup menu, select the
)&gt; tab.
&lt;Event (
2. Click &lt;SD Record&gt;.
78_ setup screen
To make recording on the SD memory
1. Check the &lt;Total Size&gt; and the &lt;Free Size&gt;.
2. If the SD memory has a sufﬁcient free space, set &lt;Record&gt; to On.
Otherwise, check the stored data and if you ﬁnd them not important, then click
&lt;Format&gt; to format the SD memory.
 If your SD memory card writes slowly, only one frame per second will be stored.
1280x720, 800x600.
 If the size of data grows with time, only 1 fps can be stored even if you set the record quality to Full
Frame.
3. Specify the record conditions.
y Record 1 fps forcibly : Only one frame per second will be recorded regardless of
the existing record proﬁle.
y Overwrite : If the SD memory is full, this will delete old data and store new data in
replacement.
y Pre-alarm duration : Specify the time point before the occurrence of the alarm;
starting from the time point, the images will be transferred. You can specify up to
5 seconds before the occurrence of the alarm.
y Post-alarm duration : Specify the time point after the occurrence of the alarm; to
the speciﬁed time point, the images will be transferred. You can specify up to 120
seconds after the occurrence of the alarm.
4. When done, click [Apply].
Alarm Input
You can set the alarm input type, activation time, and operation mode.
1. From the Setup menu, select the
&lt;Event (
)&gt; tab.
2. Click &lt;Alarm input&gt;.
3. Specify an input device.
y Normal Open : It is normally open,
but if it is closed, an alarm will be
triggered.
y Normal Close : It is normally closed,
but if it is open, an alarm will be
triggered.
4. Specify the &lt;Activation time&gt;.
y Always : Always activates when an alarm occurs.
y Only scheduled time : Activates at a speciﬁed day of the week for a speciﬁed time
period. The start time should be earlier than the end time, both of which are
different with each other.
English _79
M SETUP SCREEN
 For a SD memory card with a large capacity, the formatting will be slowed down accordingly.
 Note that only one frame per second (1 fps) will be stored for the following resolutions : 1280x1024,
setup screen
5. Specify an operation that will perform if an alarm occurs.
y Output duration : Specify the alarm output time in the alarm input setup.
y E-mail Sending : Specify the use of email transfer in the alarm input setup.
y Record : Specify the use of recording in the alarm input setup.
6. When done, click [Apply].
Video analysis
1. From the Setup menu, select the
&lt;Event (
)&gt; tab.
2. Click &lt;Video analysis&gt;.
3. Specify the use of Intelligent Video
Analysis.
4. Specify the use of overlay.
If you set it to Enable, the event rules
will be shown on the screen.
5. Specify the object size.
6. Select a sensitivity level at which the
camera detects the object.
7. Select an event rule.
 You can select a total of 3 rules including the
virtual line and the speciﬁed area.
8. Specify the activation time and activation
condition.
 For more information about &lt;Activation time&gt; and &lt;Action&gt;, refer to &quot;Alarm Input&quot;.
(page 79)
9. Specify whether or not the alarm area is displayed.
- If you set it to &lt;On&gt;, the suspect area where the alarm occurs will be marked in a
red box.
80_ setup screen
To use the IV analysis function according to the virtual line based rule
1. Set &lt;IV analysis function&gt; to
&lt;Enable&gt;.
2. Set the event rule to &lt;Virtual line based
rules&gt;.
4. Select a desired &lt;Virtual Line Rules&gt;.
 You can specify up to 3 event rules for the virtual line.
y Right : A movement from left to right in the virtual line will be detected.
y Left : A movement from right to left in the virtual line will be detected.
y Both : A movement in any direction in the virtual line will be detected.
5. Click [OK].
To cancel the existing line, right-click on the line and select [Delete] in the context
menu.
6. When done, click [Apply].
To use the IV analysis function according to the defined area based rule
1. Set &lt;IV analysis function&gt; to
&lt;Enable&gt;.
2. Set the event rule to &lt;Deﬁned area
based rules&gt;.
3. Select the vertex of a desired area,
and right-click it to display the context
menu.
4. Select a desired &lt;Deﬁned Area Rules&gt;.
 You can specify up to 3 deﬁned area event rules.
y Entering : An event where a moving object passes through the deﬁned area and
enters inside will be detected.
y Exiting : An event where a moving object passes through the deﬁned area and
exits outside will be detected.
y Appearing/Disappearing : An event will be detected where an object that has not
existed in the area until the previous frame, suddenly appears or disappears in the
area without passing through the deﬁned area.
5. Click [OK].
To cancel the speciﬁed area, right-click on the area and select [Delete] in the context
menu.
6. When done, click [Apply].
English _81
M SETUP SCREEN
3. Click a desired area in the video and
drag it to the end point, and right-click
it.
setup screen
To use the IV analysis function according to the whole area based rule
1. Set &lt;IV analysis function&gt; to
&lt;Enable&gt;.
2. Set the event rule to &lt;Entire area
based rules&gt;.
3. Select a desired &lt;Entire Area Rules&gt;.
y Appearing : An event where an object
that has not existed suddenly
appears will be detected.
y Disappearing : An event where an object that has existed suddenly disappears will
be detected.
y Scene Change : An event where the screen is changed at more than a certain time
interval will be detected.
 You can set the &lt;Scene Change&gt; rule along with rules : &lt;Appearing&gt; and &lt;Disappearing&gt;.
4. Click [OK].
5. When done, click [Apply].
Time Schedule
You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.
1. From the Setup menu, select the
)&gt; tab.
&lt;Event (
2. Click &lt;Time Schedule&gt;.
To set the timer event
1. Set &lt;Timer Event Setup&gt; to Enable.
2. Specify the &lt;Activation time&gt;.
y Always : Always sends an image at
the set interval.
y Only scheduled time : Periodically
transfers image only at a speciﬁed
time and date.
3. Specify the &lt;Transfer interval&gt;.
82_ setup screen
4. Specify the activation conditions.
y FTP Sending : Specify the use of the FTP transfer if an event occurs.
y Record : Specify the use of recording if an event occurs.
5. When done, click [Apply].
M SETUP SCREEN
SYSTEM SETUP
Product Information
1. From the Setup menu, select the
&lt;System (
)&gt; tab.
2. Click &lt;Product information&gt;.
3. Check the camera information, or
provide details according to your
network environment.
y Location : Specify the location where
the camera is installed.
y Description : Provide detailed
information about the camera location.
y Memo : Provide an explanation about the camera for better understanding.
y Language : Select a preferred language for the camera menus and the Web
Viewer OSD.
4. When done, click [Apply].
Date &amp; Time
1. From the Setup menu, select the
&lt;System (
)&gt; tab.
2. Click &lt;Date &amp; Time&gt;.
3. Specify the time and date that will be
applied to the camera.
y Current system time : Displays the
current time settings of your system.
y Timezone : Specify the local time
zone based on the GMT.
y Use Daylight Saving Time :
If checked, the time will be set one
hour before the local time zone for
the speciﬁed time period.
This option will be displayed only in areas where DST is applied.
English _83
setup screen
y System time setup : Specify the time and date that will be applied to your system.
- Manual : Specify the time manually.
- Synchronize with NTP server : Sync with the time of the speciﬁed server address.
- Synchronize with PC viewer : Synchronize the time with the connected PC.
4. When done, click [Apply].
User
1. From the Setup menu, select the
&lt;System (
)&gt; tab.
2. Click &lt;User&gt;.
3. Provide the necessary user information.
y Administrator Password Change :
Change the current password for the
administrator.
y Guest setup : If &lt;Guest access&gt; is
permitted, any guest can access the
Web Viewer screen but can view only the Live viewer screen.
y Current Users : You can change the user information and adjust the permission
level for a user who is set to &lt;Enable&gt;.
- Video : You can select a video proﬁle in the Liver viewer screen.
- Audio-In : The audio input option will be activated in the Live Viewer screen.
- Controls : You can conﬁgure the camera menus and control the use of the
alarm button.
4. When done, click [Apply].
Upgrade/Reboot
1. From the Setup menu, select the
&lt;System (
)&gt; tab.
2. Click [Upgrade/Reboot].
3. Select a desired item and set it
appropriately.
y Upgrade : Performs upgrading the
system.
84_ setup screen
y Factory default : Resets the system to the factory default.
- Except network parameter : Reset the other settings except for the interface/
port/DDNS/IP ﬁltering settings.
- All : Resets all settings including the camera settings. (however, the log
information will not be reset)
 If you reset all settings, the IP address will be defaulted to 192.168.1.100.
4. When done, click [Apply].
To perform the upgrade
1. Click [Upgrade].
2. Click [Browse] and specify a ﬁle to
upgrade.
3. Click [Send].
4. The &quot;UPGRADE&quot; dialog appears where
the progression will be shown in the
bottom.
M
 If you forcibly terminate the upgrade
process, upgrade will not be completed
properly.
To save the current settings and restore the backup settings
1. Click [Backup].
The Save As dialog should appear.
2. Specify the backup path with a proper
ﬁle name, and click [Save].
The backup ﬁle will be saved to the
speciﬁed path in the format of &quot;.bin&quot;.
3. To restore the backup settings, click
[Restore].
English _85
M SETUP SCREEN
y Conﬁguration backup &amp; Restore : Backs up the current system settings before
performing the restoration process.
y Restart : Restarts the system.
setup screen
4. Select a backup ﬁle and click [Open].
Log
You can check the system log or event log.
1. From the Setup menu, select the
)&gt; tab.
&lt;System (
2. Click &lt;Log&gt;.
3. Select a log type.
y Syslog : You can check the system
logs where any system changes are
recorded including the time information.
y Evtlog : You can check the event logs
including the time information.
4. From the right log list, select an item to
search for.
y If you select &lt;All&gt; in the top left
dropdown list, all logs for the applicable log type will be displayed.
5. If one page can not display all the logs available, use the bottom buttons to move to
the previous, next, or the last item.
M
 If you want to view the details of a log, click &lt;Description&gt; in the right column of the log; the log
information will be shown in the bottom pane.
 Each page displays 15 logs with the latest one displayed at the top.
 The event/system log list can contain up to 1000 logs; after that, the existing logs will be deleted
from the oldest one each time a new log is created.
86_ setup screen
appendix
CAMERA SPECIFICATION
Items
Camera Type
Color
Device
1.3Mega Pixel Progressive Scan CMOS
Size
1/3 inch
Scan
Pixels
Min. Scene
Illumination
M APPENDIX
Image
Description
Color/BW
Progressive Scan
Total
1,384(H) x 1,076(V), 1.49M pixels
Effective
1,329(H) x 1,049(V), 1.39M pixels
Color
Sens Up Off
0.3Lux (F1.2, 50 IRE)
B/W
Sens Up Off
0.01Lux (F1.2, 50 IRE)
Privacy Mask
Off / On (12 Programmble Zones)
Day/Night
Color / BW / AUTO(IR Cut Filter)
Backlight Compensation
BLC / HLC / SSDR / Off
Electronic Shutter Speed
Auto (1/30 ~ 30,000sec) / A.FLK / Manual
Gain Control
Off / Low / Medium / High / Manual
Sens Up
Off / Auto (Seletable up to 60X)
2D+3D Digital Noise Reduction
(SSNRIII)
Off / On (Level Adjusment)
White Balance
ATW / AWC / Manual / Indoor / Outdoor
On Screen Display
Yes (Camera Title Support)
OSD Language
English, French, Germany, Spanish, Italian
Chinese, Korean, Russian, Japanese
Swedish, Denish, Portuguese
Video Output
VBS 1.0Vp-p
VBS 1.0Vp-p
S/N Ratio
S/N Ratio
About 50 dB
Functions
English _87
appendix
Items
Lens
SNB-5000
SND-5080/F
-
Zoom ratio
-
x3.6
Aperature Ratio
-
F1.2
Tele
-
28.8˚(H) x 21.6˚(V)
Wide
-
94.6˚(H) x 68.4˚(V)
Viewing Angle
Lens Drive Type
Mount Type
2.8~10mm
Manual / DC
AI(DC)
CS/C
Board Type
Environmental Operating Temperature
Conditions
Humidity
-10˚C ~ +50˚C
-40˚C ~ +50˚C
(Fan/Heater Built-in)
0% ~ 90%
0% ~ 90% (Waterproof)
Power Requirement
Power
Power Consumption
AC24V, DC12V, PoE
6W
7W
72x 60x138.6mm
129.5(H)x133(&Oslash;)/
125(H)x160(&Oslash;)mm
525g / 765g
LED Indicator
Dimensions
(WxHxD)
Physical
Specification
SNV-5080
Focal Length
Yes
Net
Weight
Net
438g
Color
Body
Dark Grey
Case
88_ appendix
7 W (Heater Off)
11 W (Heater On)
Metal
134.5(H)x160(&Oslash;)mm
1,340g
White
Plastic
Aluminum (IP66)
NETWORK SPECIFICATION
Items
Description
OS
Alarm
Hardware
Input
Output
Compression
Resolution
SXGA
HD (16:9)
SVGA
VGA
QVGA
Max Frame Rate
Video
H.264 / MPEG4 Quality
MJPEG Quality
Bitrate Control
Streaming
Audio
Compression
Bi-Directional Communication
Motion
Detection
Intelligent Motion Detection
M APPENDIX
Network
Board
Flash memory
RAM
Ethernet
Video Out
Audio
SD Memory Slot
PoE
Embedded Linux
128M byte
256M byte
RJ-45 (10/100BASE-T)
VBS 1.0Vp-p
Line In / Line Out
Yes (SD/SDHC)
Yes (IEEE802.3af Class 2)
1 ea
1 ea (Relay)
H.264 / MPEG4 / MJPEG Multiple Codec
1280x1024
1280x720P
800x600
640x480
320x240
SXGA : 22ips
HD / SVGA / VGA / QVGA : 30ips
Compression : 1 ~ 20 (20 steps)
Target Bitrate (CBR mode only)
- 1280x1024 : 1024 ~ 10240 kbps
- 1280x720 : 1024 ~ 10240 kbps
- 800x600 : 512 ~ 5120 kbps
- 640x480 : 512 ~ 5120 kbps
- 320x240 : 64 ~ 2048 kbps
1 ~ 20 level
H.264 / MPEG4 : VBR / CBR
MJPEG : VBR
H.264 / MPEG4 / MJPEG multiple streaming
(Individual streaming simultaneously)
G.711 μ-law
Yes
Scene Change, Virtual Line
Enter / Exit, Appear / Disappear
English _89
appendix
Items
Description
IP
Network
Protocol
Protocol
IPv4
IPv6
Streaming
Security
DDNS
Maximum User Access
Connection
Administrator
User Access
Guest
Level
Additional User
Alarm Input
Event
Intelligent Motion Detection
Management
Schedule
Supported OS
Supported Browser
Web Browser
PTZ Control
Viewer
Plug-in
(Default)
UI Language
S/W upgrade
Video Player RTP/RTSP streaming
Video
Management
Software
Application IP Installation
90_ appendix
IPv4 / IPv6
TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP
HTTP, HTTPS, SSL, DHCP, FTP, SMTP, ICMP, IGMP
SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS
TCP/IP, HTTP, HTTPS, SSL, DHCP
Unicast, Multicast
HTTPS(SSL) Login Authentication
Digest Login Authentication
IP Address Filtering, User access Log
Supporting Samsung DDNS and Public DDNS services
Max 10 Users at Unicast Mode
Max 20 Users at Multicast Mode
Full Control Privilege
Live Monitoring only
Configurable privilege individually
Pre/Post Alarm Image Buffering
Image Recording : SD memory
Event Notification
E-mail Notification
Alarm Out Activation
JPEG Image transfer : FTP
Image Recording : SD memory
Alarm Out Activation
Windows XP, VISTA, 7
Mac OS
Internet Explorer 7.0 or Higher
Firefox, Google Chrome, Safari
Digital PTZ based on Mega Pixel Resolution
MS SilverLight 4.0
English, French, Germany, Spanish, Italian
Chinese, Korean, Russian, Japanese
Swedish, Denish, Portuguese
Using Web viewer UI
Quicktime, VLC player
Samsung CMS S/W, 3rd Party S/W appliction
IP Installer Application for All Samsung IP Devices
TROUBLESHOOTING
PROBLEM
SOLUTION
y Check to make sure that the camera’s Network settings are appropriate.
y Check to make sure that all network cables have been connected
properly.
y If connected using DHCP, verify that the camera is able to acquire
dynamic IP addresses without any problem.
y If connected using a DDNS URL, verify that the MAC address has been
properly entered.
y If the camera is connected to a router, verify that port forwarding is
properly configured.
y Connected Viewers become disconnected upon any change to camera or
network configurations.
Viewer got disconnected during
monitoring.
y Check all network connections.
y If the camera is connected over an PPPoE network, it’ s possible for
Viewer to disconnect under poor network conditions.
I cannot connect to the system
using a tab browser of Internet
Explorer 7.0.
y When you try to connect to the system using a tab browser, the same
cookie information is shared, resulting in errors when connected.
Therefore, instead of using a tab browser, open a new browser window
to connect to the system.
The camera connected to the
network is not detected in the IP
installer program.
y Turn off the firewall settings on your PC and then search the camera
again.
Images overlap.
y Check whether two or more cameras are set to a single multicast address
instead of different addresses. If a single address is used for multiple
cameras, the images may overlap.
No image appears.
y If the transmission method is set to multicast, check whether there is a
router that supports multicast in the LAN the camera is connected to.
English _91
M APPENDIX
I can’t access the camera from a
web browser.
appendix
PROBLEM
SOLUTION
No JPEG file is transferred via
e-mail on occurrence of intelligent
video analysis event of camera
even when the &lt;IV analysis
Function&gt; is set to &lt;Enable&gt;.
y Verify the settings in the following sequence:
Can &lt;Set Rules&gt; be configured
even when the &lt;IV analysis
Function&gt; is set to &lt;Disable&gt;?
y Yes, it can be. You can set rules for events despite of the intelligent
video analysis setting.
No signal is found at the Alarm
Output port even when an
intelligent video analysis event is
generated.
y Check alarm output port settings.
A. Check &lt;Data &amp; Time&gt; settings.
B. The &lt;IV analysis Function&gt; should be set to &lt;Enable&gt;.
C. Alarm Video Transmission must be enabled.
Cannot record into the SD memory y Check if the memory card is defective.
card.
y Check if the write protection tab of the memory card is set to &quot;Lock&quot;.
y Check if the memory card is defective.
SD memory indicator does not
turn on even when the SD memory y Check if the &lt;Record&gt; is checked in &lt;Setup&gt;  &lt;Event&gt;  &lt;SD
card is inserted.
Record&gt; menu.
SD memory card is inserted but
the camera does not operate
properly.
Cannot format the SD memory
card.
92_ appendix
y Check if the memory card is inserted in the proper direction. Operation
of memory card that is formatted by other devices is not guaranteed with
this camera unit
y Format the memory card again in &lt;Setup&gt;  &lt;Event&gt;  &lt;SD
Record&gt; menu.
y Check if the write protection tab of the memory card is set to &quot;Lock&quot;.
GPL/LGPL SOFTWARE LICENSE
This product uses some Software programs which are distributed under the GNU GPL
(General Public License)/LGPL license, and the program is licensed as is without warranty
of any kind. , The program can be obtained from us for a period of three years after our
last distribution of this product by sending email to [email protected]. If you want
to obtain the complete Corresponding Source Code in the physical medium such as CDROM by airmail, the cost of physically performing source distribution might be charged.
This offer is valid to anyone in receipt of this information. For more additional information
visit http://www.samsungsecurity.com/gpl
y GPL Software
- linux kernel, busybox.,.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C)1989, 1991 Free Software
Foundation, Inc.
51 Franklin Street,Fifth Floor, Boston,
MA 02110-1301, USA
Everyone is permitted to copy and
distribute verbatim copies of this license
document, but changing it is not allowed.
Preamble
The licenses for most software are designed
to take away your freedom to share and
change it. By contrast, the GNU General
Public License is intended to guarantee
your freedom to share and change free
software-- to make sure the software is free
for all its users.
This General Public License applies to most
of the Free Software Foundation's software
and to any other program whose authors
commit to using it. (Some other Free Software
Foundation software is covered by the GNU
Lesser General Public License instead.) You
can apply it to your programs, too.
When we speak of free software, we are
referring to freedom, not price.
Our General Public Licenses are designed
to make sure that you have the freedom
to distribute copies of free software (and
charge for this service if you wish), that you
receive source code or can get it if you
want it, that you can change the software
or use pieces of it in new free programs ;
and that you know you can do these things.
To protect your rights, we need to make
restrictions that forbid anyone to deny you
these rights or to ask you to surrender the
rights. These restrictions translate to certain
responsibilities for you if you distribute
copies of the software, or if you modify it.
For example, if you distribute copies of
such a program, whether gratis or for a fee,
you must give the recipients all the rights
that you have.
You must make sure that they, too, receive or
can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps :
(1)copyright the software, and (2)offer
you this license which gives you legal
permission to copy, distribute and/or
modify the software.
Also, for each author's protection and ours,
we want to make certain that everyone
understands that there is no warranty for
this free software. If the software is modiﬁed
by someone else and passed on, we want
its recipients to know that what they have
is not the original, so that any problems
introduced by others will not reﬂect on the
original authors' reputations.
Finally, any free program is threatened
constantly by software patents. We wish
to avoid the danger that redistributors of a
free program will individually obtain patent
licenses, in effect making the program
proprietary. To prevent this, we have made
it clear that any patent must be licensed for
everyone's free use or not licensed at all.
The precise terms and conditions for
copying, distribution and modiﬁcation follow.
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program
or other work which contains a notice
placed by the copyright holder saying it
may be distributed under the terms of
this General Public License.
The &quot;Program&quot;, below, refers to any such
program or work, and a &quot;work based on
the Program&quot; means either the Program
or any derivative work under copyright
law : that is to say, a work containing the
Program or a portion of it, either verbatim
or with modiﬁcations and/or translated
into another language. (Hereinafter,
translation is included without limitation
in the term &quot;modiﬁcation&quot;.) Each licensee
is addressed as &quot;you&quot;.
Activities other than copying, distribution
and modiﬁcation are not covered by
this License ; they are outside its scope.
The act of running the Program is not
restricted, and the output from the
Program is covered only if its contents
constitute a work based on the Program
(independent of having been made by
running the Program). Whether that is
true depends on what the Program does.
1. You may copy and distribute verbatim
copies of the Program's source code as
you receive it, in any medium, provided
that you conspicuously and appropriately
publish on each copy an appropriate
copyright notice and disclaimer of
warranty; keep intact all the notices that
refer to this License and to the absence
of any warranty ; and give any other
recipients of the Program a copy of this
License along with the Program.
You may charge a fee for the physical
act of transferring a copy, and you may
at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies
of the Program or any portion of it,
thus forming a work based on the
Program, and copy and distribute such
modiﬁcations or work under the terms of
Section 1 above, provided that you also
meet all of these conditions :
a) You must cause the modiﬁed ﬁles to
carry prominent notices stating that
you changed the ﬁles and the date of
any change.
b) You must cause any work that you
distribute or publish, that in whole or
in part contains or is derived from the
Program or any part thereof, to be
licensed as a whole at no charge to
all third parties under the terms of this
License.
c) If the modiﬁed program normally
reads commands interactively
when run,you must cause it, when
started running for such interactive
use in the most ordinary way, to
print or display an announcement
including an appropriate copyright
notice and a notice that there is no
warranty (or else, saying that you
provide a warranty) and that users
may redistribute the program under
these conditions, and telling the user
how to view a copy of this License.
(Exception:if the Program itself is
interactive but does not normally print
such an announcement, your work
based on the Program is not required
to print an announcement.)
These requirements apply to the modiﬁed
work as a whole. If identiﬁable sections
of that work are not derived from
the Program, and can be reasonably
considered independent and separate
works in themselves, then this License, and
its terms, do not apply to those sections
when you distribute them as separate
works. But when you distribute the same
sections as part of a whole which is a work
based on the Program, the distribution
of the whole must be on the terms of this
License, whose permissions for other
licensees extend to the entire whole, and
thus to each and every part regardless of
who wrote it.
Thus, it is not the intent of this section to
claim rights or contest your rights to work
written entirely by you ; rather, the intent is to
exercise the right to control the distribution
of derivative or collective works based on
the Program. In addition, mere aggregation
of another work not based on the Program
with the Program (or with a work based on
the Program)on a volume of a storage or
distribution medium does not bring the other
work under the scope of this License.
3. You may copy and distribute the
Program (or a work based on it, under
Section 2)in object code or executable
form under the terms of Sections 1 and
2 above provided that you also do one of
the following :
a) Accompany it with the complete
corresponding machine-readable
source code, which must be
distributed under the terms of
Sections 1 and 2 above on a medium
customarily used for software
interchange ; or,
b) Accompany it with a written offer,
valid for at least three years, to give
any third party, for a charge no
more than your cost of physically
performing source distribution, a
complete machinereadable copy
of the corresponding source code,
to be distributed under the terms
of Sections 1 and 2 above on a
medium customarily used for software
interchange ; or,
c) Accompany it with the information
you received as to the offer to
distribute corresponding source code.
(This alternative is allowed only for
noncommercial distribution and only
if you received the program in object
code or executable form with such
an offer, in accord with Subsection b
above.)
The source code for a work means the
preferred form of the work for making
modiﬁcations to it. For an executable work,
complete source code means all the source
code for all modules it contains, plus any
associated interface deﬁnition ﬁles, plus
the scripts used to control compilation and
installation of the executable. However,
as a special exception, the source code
distributed need not include anything that
is normally distributed (in either source or
binary form)with the major components
(compiler, kernel, and so on)of the operating
system on which the executable runs,
unless that component itself accompanies
the executable.
If distribution of executable or object code
is made by offering access to copy from a
designated place, then offering equivalent
access to copy the source code from the
same place counts as distribution of the
source code, even though third parties are
not compelled to copy the source along
with the object code.
4. You may not copy, modify, sublicense,
or distribute the Program except as
expressly provided under this License.
Any attempt otherwise to copy, modify,
sublicense or distribute the Program is
void, and will automatically terminate
your rights under this License.
However, parties who have received
copies, or rights, from you under this
License will not have their licenses
terminated so long as such parties
remain in full compliance.
5. You are not required to accept this
License, since you have not signed it.
However, nothing else grants you
permission to modify or distribute the
Program or its derivative works.
These actions are prohibited by law if you
do not accept this License.Therefore, by
modifying or distributing the Program (or
any work based on the Program), you
indicate your acceptance of this License
to do so, and all its terms and conditions
for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program
(or any work based on the Program),
the recipient automatically receives a
license from the original licensor to copy,
distribute or modify the Program subject
to these terms and conditions.
You may not impose any further
restrictions on the recipients' exercise of
the rights granted herein.
You are not responsible for enforcing
compliance by third parties to this
License.
7. If, as a consequence of a court judgment
or allegation of patent infringement or for
any other reason (not limited to patent
issues), conditions are imposed on you
(whether by court order, agreement or
otherwise)that contradict the conditions
of this License, they do not excuse you
from the conditions of this License. If
you cannot distribute so as to satisfy
simultaneously your obligations under
this License and any other pertinent
obligations, then as a consequence you
may not distribute the Program at all.
For example, if a patent license would
not permit royalty-free redistribution of
the Program by all those who receive
copies directly or indirectly through you,
then the only way you could satisfy both
it and this License would be to refrain
entirely from distribution of the Program.
If any portion of this section is held invalid
or unenforceable under any particular
circumstance, the balance of the section
is intended to apply and the section as
a whole is intended to apply in other
circumstances. It is not the purpose of
this section to induce you to infringe any
patents or other property right claims or
to contest validity of any such claims; this
section has the sole purpose of protecting
the integrity of the free software distribution
system, which is implemented by public
license practices. Many people have made
generous contributions to the wide range
of software distributed through that system
in reliance on consistent application of that
system ; it is up to the author/donor to
decide if he or she is willing to distribute
software through any other system and a
licensee cannot impose that choice.
This section is intended to make thoroughly
clear what is believed to be a consequence
of the rest of this License.
8. If the distribution and/or use of the
Program is restricted in certain countries
either by patents or by copyrighted
interfaces, the original copyright holder
who places the Program under this
License may add an explicit geographical
distribution limitation excluding those
countries,so that distribution is permitted
only in or among countries not thus
excluded. In such case, this License
incorporates the limitation as if written in
the body of this License.
9. The Free Software Foundation may
publish revised and/or new versions of
the General Public License from time to
time. Such new versions will be similar
in spirit to the present version, but may
differ in detail to address new problems
or concerns.
Each version is given a distinguishing
version number. If the Program speciﬁes
a version number of this License which
applies to it and &quot;any later version&quot;, you
have the option of following the terms and
conditions either of that version or of any
later version published by the Free Software
Foundation. If the Program does not specify
a version number of this License, you may
choose any version ever published by the
Free Software Foundation.
10. If you wish to incorporate parts of the
Program into other free programs
whose distribution conditions are
different, write to the author to ask
for permission. For software which
is copyrighted by the Free Software
Foundation,write to the Free Software
Foundation ; we sometimes make
exceptions for this. Our decision will be
guided by the two goals of preserving
the free status of all derivatives of our
free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS
LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR
THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE
THE PROGRAM &quot;ASIS&quot; WITHOUT
WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF
THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAMPROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED
BY APPLICABLE LAW OR AGREED
TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MAY MODIFY
AND/OR REDISTRIBUTE DAMAGES,
INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT
LIMITED TO LOSS OF DATA OR DATA
BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU
OR THIRD PARTIES OR A FAILURE
OF THE PROGRAM TO OPERATE
WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Programs
If you develop a new program, and you
want it to be of the greatest possible use to
the public, the best way to achieve this is to
make it free software which everyone can
redistribute and change under these terms.
To do so, attach the following notices to
the program. It is safest to attach them
to the start of each source ﬁle to most
effectively convey the exclusion of warranty
; and each ﬁle should have at least the
&quot;copyright&quot; line and a pointer to where the
full notice is found.
one line to give the program's name and an
idea of what it does.
Copyright (C)yyyy name of author
This program is free software ; you can
redistribute it and/or modify it under the
terms of the GNU General Public License as
published by the Free Software Foundation
; either version 2 of the License, or (at your
option)any later version.
This program is distributed in the hope
that it will be useful, but WITHOUT ANY
WARRANTY ; without even the implied
warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for
more details.
You should have received a copy of the
GNU General Public License along with this
program ; if not, write to the Free Software
Foundation, Inc.,51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you
by electronic and paper mail. If the program
is interactive, make it output a short notice
like this when it starts in an interactive
mode :
Gnomovision version 69,
Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY
NO
WARRANTY ; for details type ‘show w’.
This is free software, and you are welcome
to redistribute it under certain conditions ;
type ‘show c’ for details.
The hypothetical commands ‘show w’ and
‘show c’ should show the appropriate parts
of the General Public License. Of course,
the commands you use may be called
something other than ‘show w’ and ‘show
c’ ; they could even be mouse-clicks or
menu items-- whatever suits your program.
You should also get your employer (if you
work as a programmer)or your school, if
any, to sign a &quot;copyright disclaimer&quot; for the
program,if necessary. Here is a sample ;
alter the names:
Yoyodyne, Inc.,hereby disclaims all
copyright interest in the program ‘
Gnomovision’ (which makes passes at
compilers) written by James Hacker.
signature of Ty Coon, 1 April 1989 Ty
Coon, President of Vice This General Public
License does not permit incorporating your
program into proprietary programs. If your
program is a subroutine library, you may
consider it more useful to permit linking
proprietary applications with the library. If
this is what you want to do, use the GNU
Lesser General Public License instead of
this License.
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright &copy; 2007 Free Software Foundation,
Inc. &lt;http://fsf.org/&gt;
Everyone is permitted to copy and distribute
verbatim copies of this license document, but
changing it is not allowed.
0. Additional Deﬁnitions.
As used herein, “this License” refers to version
3 of the GNU Lesser General Public License,
and the “GNU GPL” refers to version 3 of the
GNU General Public License.
“The Library” refers to a covered work
governed by this License, other than an
Application or a Combined Work as deﬁned
below.
An &quot;Application&quot; is any work that makes use
of an interface provided by the Library, but
which is not otherwise based on the Library.
Deﬁning a subclass of a class deﬁned by
the Library is deemed a mode of using an
interface provided by the Library.
A “Combined Work” is a work produced by
combining or linking an Application with the
Library. The particular version of the Library
with which the Combined Work was made is
also called the “Linked Version”.
The “Minimal Corresponding Source” for a
Combined Work means the Corresponding
Source for the Combined Work, excluding
any source code for portions of the Combined
Work that, considered in isolation, are based
on the Application, and not on the Linked
Version.
The “Corresponding Application Code” for a
Combined Work means the object code and/
or source code for the Application, including
any data and utility programs needed for
reproducing the Combined Work from
the Application, but excluding the System
Libraries of the Combined Work.
1. Exception to Section 3 of the GNU GPL.
You may convey a covered work under
sections 3 and 4 of this License without being
bound by section 3 of the GNU GPL.
2. Conveying Modiﬁed Versions.
If you modify a copy of the Library, and,
in your modiﬁcations, a facility refers to
a function or data to be supplied by an
Application that uses the facility (other than
as an argument passed when the facility is
invoked), then you may convey a copy of the
modiﬁed version:
 a) under this License, provided that you
make a good faith effort to ensure that,
in the event an Application does not
supply the function or data, the facility
still operates, and performs whatever
part of its purpose remains meaningful,
or b) under the GNU GPL, with none of
the additional permissions of this License
applicable to that copy.
3. Object Code Incorporating Material from
Library Header Files.
The object code form of an Application may
incorporate material from a header ﬁle that
is part of the Library. You may convey such
object code under terms of your choice,
provided that, if the incorporated material
is not limited to numerical parameters, data
structure layouts and accessors, or small
macros, inline functions and templates (ten
or fewer lines in length), you do both of the
following:
 a) Give prominent notice with each copy of
the object code that the Library is used
in it and that the Library and its use are
covered by this License.
 b) Accompany the object code with a
copy of the GNU GPL and this license
document.
4. Combined Works.
You may convey a Combined Work under
terms of your choice that, taken together,
effectively do not restrict modiﬁcation of
the portions of the Library contained in the
Combined Work and reverse engineering for
debugging such modiﬁcations, if you also do
each of the following:
 a) Give prominent notice with each copy of
the Combined Work that the Library is
used in and that the Library and its use
are covered by this License.
 b) Accompany the Combined Work with a
copy of the GNU GPL and this license
document.
 c) For a Combined Work that displays
copyright notices during execution,
include the copyright notice for the
Library among these notices, as well
as a reference directing the user to the
copies of the GNU GPL and this license
document.
 d) Do one of the following:
Convey the Minimal Corresponding
Source under the terms of this License,
and the Corresponding Application Code
in a form suitable for, and under terms
that permit, the user to recombine or
relink the Application with a modiﬁed
version of the Linked Version to produce
a modiﬁed Combined Work, in the
manner speciﬁed by section 6 of the
GNU GPL for conveying Corresponding
Source.
1) Use a suitable shared library mechanism
for linking with the Library. A suitable
mechanism is one that (a) uses at run time
a copy of the Library already present on
the user's computer system, and (b) will
operate properly with a modiﬁed version of
the Library that is interface-compatible with
the Linked Version.
 e) Provide Installation Information, but only
if you would otherwise be required to
provide such information under section 6
of the GNU GPL, and only to the extent
that such information is necessary to
install and execute a modiﬁed version
of the Combined Work produced by
recombining or relinking the Application
with a modiﬁed version of the Linked
Version. (If you use option 4d0, the
Installation Information must accompany
the Minimal Corresponding Source and
Corresponding Application Code. If you
use option 4d1, you must provide the
Installation Information in the manner
speciﬁed by section 6 of the GNU GPL for
conveying Corresponding Source.)
5. Combined Libraries.
You may place library facilities that are a work
based on the Library side by side in a single
library together with other library facilities that
are not Applications and are not covered by
this License, and convey such a combined
library under terms of your choice, if you do
both of the following:
 a) Accompany the combined library with
a copy of the same work based on the
Library, uncombined with any other library
facilities, conveyed under the terms of this
License.
 b) Give prominent notice with the combined
library that part of it is a work based on
the Library, and explaining where to ﬁnd
the accompanying uncombined form of
the same work.
6. Revised Versions of the GNU Lesser
General Public License.
The Free Software Foundation may publish
revised and/or new versions of the GNU
Lesser General Public License from time to
time. Such new versions will be similar in spirit
to the present version, but may differ in detail
to address new problems or concerns.
Each version is given a distinguishing version
number. If the Library as you received it
speciﬁes that a certain numbered version of
the GNU Lesser General Public License “or
any later version”
applies to it, you have the option of following
the terms and conditions either of that
published version or of any later version
published by the Free Software Foundation.
If the Library as you received it does not
specify a version number of the GNU Lesser
General Public License, you may choose any
version of the GNU Lesser General Public
License ever published by the Free Software
Foundation.
If the Library as you received it speciﬁes that
a proxy can decide whether future versions
of the GNU Lesser General Public License
shall apply, that proxy's public statement
of acceptance of any version is permanent
authorization for you to choose that version
for the Library.
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
701, Sampyong-dong, Bundang-gu, Seongnam-si Gyeonggi-do, Korea, 463-400
TEL : +82-70-7147-8771~8 FAX : +82-31-8018-3745
SAMSUNG TECHWIN AMERICA Inc.
1480 Charles Willard St, Carson, CA 90746, UNITED STATES
Tol Free : +1-877-213-1222 FAX : +1-310-632-2195
www.samsungcctvusa.com
SAMSUNG TECHWIN EUROPE LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS
TEL : +44-1932-45-5300 FAX : +44-1932-45-5325
www.samsungsecurity.com
www.samsungipolis.com
VAN 10. 04
">
Hello! I am an AI chatbot specifically trained to assist you with the Samsung SND 5080F SNV 5080 Network Camera คู่มือผู้ใช้. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!
Show related prompts