Samsung Digital Camera EZ View Kit User's manual

Samsung Digital Camera EZ View Kit User's manual
SDE-3004
EZ View Kit
Quick Start Guide
1.
2.
3.
4.
5.
6.
7.
Connecting with Other Devices
Installation
Starting Up
REC & Play
Router & Port Forwarding Set Up
Web Browsing
Monitoring
1. CONNECTING WITH OTHER DEVICES
Broadband Modem
Local PC
Broadband
Router or HUB
1
AUDIO IN
2
NETWORK
DC 12V
ALARM IN
ALARM OUT
1 2 3 4 G 1 COM G
3
4
VIDEO OUT
AUDIO OUT
VGA
CONSOLE
USB
make sure not to fully expose the camera to rain. The camera must be installed under a shelter to avoid exposure to excessive rain or
JJ `` Please
moisture.
``
The camera satisfies the IP65 standard, and direct exposure to water or moisture may cause problem such as condensation.
ÚÚ If you do not use the Internet, just follow the steps below:
1
2
4
5
6
11 12 13 14 15 16 24
English-2
2. INSTALLATION
1
Connect the camera to the Camera In port.
AUDIO OUT Connection
3
TO DV
R SIDE
Connect the LAN cable and mouse.
The default connection for use of the Internet is as follows:
You can connect a USB HDD mouse to the USB port.
AUD
IO IN
ONLY
VIDE
O OUT
ALARM
IN
1 2
3 4
AUD
IO OUT
VGA
ALARM
G 1
OUT
COM
G
NETW
ORK
DC 12V
CON
SOLE
USB
TO CA
MERA
SIDE ON
LY
LAN
Connecting the Camera
are two labels affixed at the end of the jacks of camera
MM `` There
cable, indicating one of the jacks should be connected to DVR,
AUDIO IN
Connect the Video and Audio Out connectors to the
monitor.
For a PC monitor, use the VGA connector for the
connection.
NETWORK
DC 12V
1
and the other should be connected to camera. Please check it
first before connection.
2
Mouse
VIDEO OUT
AUDIO OUT
ALARM IN
2 3 4 G
ALARM OUT
1 COM G
CONSOLE
USB
VGA
Broadband
Router or HUB
Broadband
Modem
Local PC
Connect the modem to the
WAN port of the router and
connect each of the PC and
the set to the LAN port.
VIDEO OUT Connection
4
VGA OUT Connection
English-3
Connect the DC adaptor.
3. Starting Up
5
Connect the power source.
7
Press the [MENU] button on the remote control.
8
Select <Date/Time/Language> in <System> menu.
Logout
Return
System
ÚÚ If you don't change the “auto logout” item, please
refer 7 . The login prompt in 6 only appears when
you change the auto logout time.
6
When prompted, use the virtual keyboard to enter the
password (default: 4321) in the PASSWORD input box.
2012-01-01 01:10:25
Date/Time/Language
Permission Management
System Management
Log Information
9
Use the mouse to adjust the time setting.
Date/Time/Language
Date/Time/Language
Login
Holiday
 Date2012-01-01
YYYY-MM-DD
 Time
24 Hours
 IDadmin
 Password
OK
08:14:24
 Time ZoneGMT
Cancel
 Time Sync.
Setup
 DST
 Language
Dec First (Sun) 0
ÚÚ All operations can be controlled with the mouse.
6-1
10
1. Use the direction buttons ($%_+) to move to a desired
character and press the [ENTER] button.
> button to toggle the letter case.
` 1234567890- =

r
t
y
u
i
o p [ ] \
Del
g h
j
k
l;‘
Caps Lock
a
s d
f
z
x c
v b n m ,./
Shift
Space
OK
Select the Network menu. Sets the Connection type to
<Static IP> and enter the IP address. Click the <OK>
button.
Connection
4. Complete your input and when done, click <OK> to close the
virtual keyboard.
q w e
Cancel
Connection Mode
> button to erase the previous character.
3. Use the <
OK
ÚÚ To apply your setting click the <OK> button.
Using the Virtual Keyboard
2. Use the <
Dec First (Sun) 0
English
Protocol
 Connection Mode
Static IP
 Bandwidth
2Mbps
 IP
192.168. 1.200
 Gateway
192.168. 1.
 Subnet Mask
255.255.255. 0
 DNS
Manual
1
168.126. 63. 1
OK
Cancel
ÚÚ If using DI-624 manufactured by D-link
IP ADDRESS:192.168.1.200/
GATEWAY: 192.168.1.1 / SUBNET MASK: 255.255.255.0 /
1ST DNS SERVER: 168.126.63.1 / 2ND DNS SERVER:
168.126.63.2
Ctrl
Cancel
English-4
4. REC & PLAY
11
Press the [MENU] button on the remote control.
Select <Record>.
12
Set each of the Record Schedule options.
To change the setting, set the channel then select the
time and date you when want to record.
15-1
Select a desired date in the calendar, and a desired
timeline in the Time bar, and press the <Play> button.
Time Search
Go to First
2012-01-01
All
CAM 02
CAM 03
2012/01/01 00:01:17
CAM 04
StandardSchedule
MotionEtc
V.Loss
Event Record Duration
15-2
REC Quality & Resolution
Record Option
To change the record quality & resolution, select
<REC Quality & Resolution>.
If you have set the event recording, you can play a
desired scene using the <Event Search> function. Set
a desired date in the calendar and the result will be
listed on the table.
Select one you desired and press the <Play> button.
Event Search
If you change the setting of the resolution and the remaining
rate, the remaining count shows each available resolution.
CAM 01
2012-01-01
Overlapped Data List1
REC Quality & Resolution
Standard
1
Event
2
2CIF(M) : 4
Resolution 
CIF(S)
CIF(S)
7fps
7fps


Level4
Level4

7fps

Level4


7fps

Level4

16
RECORD SIZE
POSSIBLE FPS
NTSC
2CIF 704 × 240
OFF, 1~30
14
1
00:01:22 ~ 00:02:28
Motion
Event
Play
Return
You can change the play speed or channel, or stop the
playback using the onscreen button bar.
2012-01-01 01:10:25
OFF, 1~30
OFF, 1~30
CIF 352 x 288
OFF, 1~25
4CIF 704 x 576
OFF, 1~25
2CIF 704 x 288
Motion
Previous/Next Page
SYSTEM
PAL
Motion
00:39:06 ~ 00:40:30
Cancel
4CIF 704 × 480
02:47:54 ~ 02:48:59
2

CIF(S)
CIF(S)
CIF 352 × 240
Date/Time Preview
3

3
OK
Go to Last
No.
Record Quality 

4
Go to First
2012/01/01 00:01:22
CIF(S) : 8
Record Rate 

Return
The colored line indicates types of the recording data.
If you want to play a time specific data, enter an exact
time.
Recording Schedule
CH
Play
Return
Record
Remaining count : 4CIF(L) : 2
Zoom Out
Data
CAM 01
13
Zoom In
00:01
Press the [ENTER] button while the cells are selected.
The record type will cycle through <No Recording><Continuous>-<Event>-<Both(Cont&Evnt)>.
The default is as shown below.
Logout
Go to Last
Overlapped Data List1
OFF, 1~25
REC
Press the [SEARCH] button on the remote control.
English-5
5. Router & Port Forwarding SET Up
17
The following is configuration for the Internet connection.
This is a typical example.
Broadband
Router or HUB
Cable/ADSL Modem
Internet
21-1
or
DDNS Server
(websamsung.net)
Direct LAN
(Fixed/Static IP)
IP : 192.168.1.200
Protocol : TCP
Private Port : 4520~4524
Public Port : 4520~4524
DIGITAL VIDEO RECORDER
POWER
IP : 192.168.1.200
Protocol : TCP
Private Port : 80
Public Port : 80
REC
21-2
DVR
Local PC
18
Port Forwarding
When the router setting is done, select Virtual Server in
the “Advanced” tab where you can configure the Port
Forwarding settings. Click “Apply” to apply your
settings.
`` For more information, refer to the router guide of the manual CD.
(Model: D-LINK DI-624).
In the Network Properties window, check the IP address
and gateway.
Running the Quick Connect program
`` For more information, refer to the quick connect guide of the
provided manual CD.
It is easy for you to use DHCP setting for Quick Connection Program.
Path: Network  Connection Mode  Connection
Change: Static IP  Dynamic IP
1. Insert the provided CD into your computer’s CD drive, and
double click “Quick Connect.exe” program to run it.
2. Click [Next >] button.
192.168.1.200
255.255.255.0
192.168.1.1
19
Connect to the router using the gateway address found
in step ‘ 18 ’ above.
3. When < > appears on the right side of TCP Port and Web
port number, click [Next >] button.
4. Click [Finish] button to exit the program.
20
If you first connect to the router, you will see the “Setup Wizard” run that proceeds in the following order.


English-6


6. Web Browsing
22
In the address bar of Internet Explorer, enter the Set IP.
For the internal network, enter the Set Local IP and for the
external network, enter the DDNS address.
* Refer to the domain name of the set defined in DDNS
Menu.
`` If you select <iPOLiS>, the “DDNS host address” item will be
displayed. iPOLiS users should register the device with the website
(Domestic (Korea): http://www.samsungipolis.co.kr, Overseas:
http://www.samsungipolis.com) and provide the user name.
(ex: Registered as SDE-300X_HOME)
DDNS
 DDNS Site
iPOLiS
 Host Name
www.samsungip...
 User Name
SDE-3004_HOME
 User Password
 DDNS Host Address
http://www.samsungipolis.com/SDE-3004_HOME
If the popup window is not activated, unblock the popup.
If you first connect to the PC, you will see
a message as shown.
Install the suggested ActiveX control.
23
OK
Cancel
Connect to the Web Viewer and enter the user ID and
password.
Default ID: admin, PW: 4321
`` For more information, refer to the user manual. (Page 66)
`` The default password can be exposed to a hacking thread so it is
recommended to change the password after installing the product.
Note that the security and other related issues caused by the
unchanged password shall be responsible for the user.
If you first connect to the PC, you will see a message as
shown above. Click “Install” to install the suggested
software.
Connection Mode
Connection
Protocol
 Connection Mode
Static IP
 Bandwidth
2Mbps
 IP
192.168. 1.200
 Gateway
192.168. 1.
 Subnet Mask
255.255.255. 0
 DNS
Manual
1
168.126. 63. 1
OK
Cancel
EX. L
AN http://192.168.1.200:80
(when you connect the set within Local
Network or know that IP)
WAN http://www.samsungipolis.com/User ID
(When you connect the set via External Network)
English-7
7. Monitoring
24-1
26
Right click the screen or press the [MODE] on the
remote control.
Using a Smartphone
1. Download iPOLiS mobile to your Smartphone.
2012-01-01 01:10:25
2. From the start screen of iPOLiS mobile, tap <Device List>.
The Add Device screen appears.
3. Register the DVR to the iPOLiS mobile.
more information, refer to the user manual.
MM `` For
(http://www.samsungcctv.com)
2012-01-01
01:10:25
24-2
When the launcher menu appears, press the <
button.
>
ÚÚ Y
ou can add or modify the screen transition interval
in “System > Device > Monitor” menu.
25
If the DVR set is connected to the Internet in normal
network settings, you can set the DVR’s current time in
sync with the selected <Time Server> regularly if you
select to use <Time Server>.
If you want to use the DST functions, set it to ON.
Date/Time/Language
Date/Time/Language
 Date
Time
Holiday
2012 -01-01
YYYY-MM-DD
Synchronization
Setup
Use
 Synchronization
08:14:24
24 Hours
 Time
 Time Server203.248.240.103
 Time ZoneGMT+08:00
Fail
 Last Sync Time
Setup
Not Used
 Time Sync.
Use
 Activate as Server
Dec First (Sun) 0H
Dec First (Sun) 0H
 DST
 Language
OK
Cancel
OK
Cancel
English
English-8
1.X
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement