Samsung | XE700T1A | User's Manual | Samsung XE700T1A User manual

Getting Started
Using
Usin the Slate PC
g
www.samsungcomputer.com
1
Before Reading This Guide
Before Reading This Guide
• This guide describes the general functions provided with
Samsung Slate PC. Some functions and devices may not
be provided or the version may differ depending on the
product.
Please note that the descriptions in this guide may not
match your computer’s environment exactly.
• The images on the cover and the main content of this guide
are images of representative Samsung Slate PC models and
may differ from your actual product.
Getting Started
Copyright
© 2011 Samsung Electronics Co., Ltd.
This guide is the property of Samsung Electronics Co., Ltd.
and is protected by copyright.
No information contained herein may be distributed or copied
in any form whatsoever without the prior written consent of
Samsung Electronics Co., Ltd.
Information in this guide is subject to change due to functional
enhancements of the product and other reasons without prior
notice.
2
Getting Started
CONTENTS
Getting Started
sing the Touch
U
Feature
Using the Slate PC
Overview
Using the Basic Gestures
Turning the Slate PC On and Off
Using the Applied Gestures
sing the Auto Screen RotationU
Function
Using the Touch Logon
Screen Calibration
Adjusting the Volume
LCD (Touch Screen) Brightness-
Entering Letters Using the
Wireless Network
Control
Touch Screen
Using the camera
Using the Home Button
Using the Touch Launcher
Using the Bluetooth keyboard
Using the Easy Settings
Using the Touch Supporter
Using the Slate PC Dock
Using the digitizer pen
2
Getting Started
Getting Started
Overview
Turning the Slate PC On and Off
Using the Touch Logon
LCD (Touch Screen) Brightness Control
Using the Home Button
Using the Easy Settings
4
Overview
Getting Started
Top View
Microphone
Micro SD Card Slot
Left View
Front View
Camera
Illumination Sensor
Right View
USB Port
Power Button
Ear-set /
headset Jack
Rotation Lock
Volume Control
Button
SIM Card Slot
(Optional)
Micro HDMI Port
Camera
DC Jack
Home button
Bottom View
speaker
Slate PC Dock Port
Touch Screen
Rear View
Battery
Emergency
Hole
5
Turning the Slate PC On and Off
Turning the computer on
Setting up the Windows
1
Connect the AC adapter.
2
3
Getting Started
Press the Power button to turn the computer on.
Power button LED is lit while the computer is turned on.
LED
When you use the computer for the first time, you have to
Set up the Windows.
Turn the computer on and follow the Setting up the procedures
according to the instructions on the Windows screen.
1
Turn the computer on.
2
Confirm your country and region, the time and currency,
the keyboard type and click Next.
3
Follow the activation procedures according to the
instructions on the screen.
6
Turning the Slate PC On and Off
4
Once the Windows set-up is complete, you can use the
computer.
Getting Started
Turning the computer off
Click Start
computer.
> Shut down mode
1
Entering Sleep mode
When the computer is turned on, press the computer’s power
button once briefly.
To wake the computer up, briefl y press the Power button of the
computer again.
to shutdown the
2
7
Using the Touch Logon
Getting Started
Using the Touch Logon program, you can easily log on using your fingers.
Configuring the Touch Logon program
3
Choose the Touch Logon background screen.
Select a background screen by touching it and touch Next.
To use the Touch Logon function, you have to setup the Touch
Logon function in the Windows Logon screen.
1
Click Start > All Programs > Samsung > Touch Logon >
Touch Logon Options.
2
Select Use Touch Logon.
z
x
If you haven’t set a Windows password, the Touch Logon
settings are finished at this stage.
If you have set a Windows password, proceed to the next
step.
8
Using the Touch Logon
4
Getting Started
Choose a Touch Logon theme.
If you touch a theme, you can view a video that shows you
how to use the theme to logon. Select a theme and touch
Next.
6
Set a Touch Logon password.
Set a Touch Logon password according to the method of
the corresponding theme and touch Next.
E.g. when the Color Ball theme is selected.
z
x
z
x
5
Touch OK and enter the previously configured Windows
password.
7
Confirm the Touch Logon password you entered in the
previous step.
Touch the password that you have entered again by
touching each letter of the password in sequence. When
entering the password is complete, touch Next.
8
The Touch Logon settings have been completed.
Now you can use the Touch Logon function from when you
next logon.
9
Using the Touch Logon
Using the Touch Logon function
To logon by touch in the Windows logon screen
1
Press the Power button to turn the computer on.
2
When the Windows logon screen appears, touch your
account to log on.
3
When the following screen appears, touch the
at the
bottom of the screen and drag it to the top while your
finger maintains contact.
Getting Started
4
Touch each letter of the configured Touch Logon password
in sequence.
E.g. when the Color Ball theme is set
If there is no configured Windows account password, it is
immediately Unlocked without requiring the password.
10
Using the Touch Logon
Getting Started
Changing the Touch Logon Settings
/Removing Touch Logon
1
Click Start > All Programs > Samsung > Touch Logon >
Touch Logon Options.
2
You can change the Touch Logon settings or remove the
Touch Logon function according to the instructions on the
screen.
Change Touch Logon
Remove Touch
If you change the Windows password in the Control Panel >
User Accounts, the Touch Logon function is deactivated.
11
LCD (Touch Screen) Brightness Control
Getting Started
The LCD brightness is automatically controlled using the illumination sensor. You can manually control the LCD brightness as follows.
1
Launch the Easy Settings.
2
Click Display > Screen Brightness and set the brightness
level.
x
z
Maintaining the changed LCD brightness even
after turning the computer on again
● To maintain the LCD brightness set by using the
brightness control keys or through the Power Options,
follow the procedures below.
► For Windows 7
1. Click Control Panel > Hardware and Sound >
Power Options.
2. Click Change the settings of the currently
configured mode.
3. Adjust the display brightness adjustment menu bar
and click the Save the changes button.
When the computer runs on battery power, the
touch screen is dark.
The screen brightness is set to dark when the computer is
running on battery power to extend the battery use time. In
the Easy Settings, set the level of the screen brightness.
12
Using the Home Button
Getting Started
Using the Home button, you can conveniently execute the Touch Launcher or switch to the Windows Desktop screen.
Touching
Once
Launches the Touch Launcher.
Touching
and holding
shows the Windows Desktop screen.
Touching
Twice
performs the role of the Win + Tab key
combination.
13
Using the Easy Settings
Getting Started
Easy Settings is the integrated Samsung software control program
1
Click Start > All Programs > Samsung > Easy Settings.
2
To configure a function, select the corresponding item.
The
functions
of the Easy
Settings
Advanced
Settings
screen
for each
functions
The functions of the Easy Settings
Touch
calibration
The Touch Logon setting and the screen
text font size setting.
General
Fast Start setting, silent mode and user
account.
Power
You can configure the Power Plan (highperformance, power-saving, Samsung
optimal mode), the power-saving settings
and the display settings.
Wireless
Network
You can configure whether to use the
Airplane mode and Wi-Fi options.
Display
You can configure external display devices,
and the screen brightness/color.
Desktop
Background You can configure the Desktop background
and the screen saver.
/ Screen
Saver
Sound Alive
You can configure the sound mode (Music,
Movie, Speech, Silver Mode etc.).
14
Using the Touch Feature
Using the Touch Feature
Using the Basic Gestures
Using the Applied Gestures
Screen Calibration
Entering Letters Using the Touch Screen
Using the Touch Launcher
Using the Touch Supporter
Using the digitizer pen
15
Using the Basic Gestures
Using the Touch Feature
Learning basic touch screen operations
Touch Operation
Function
Single-tap (click)
To select an item, tap over the item with your finger. This is the same as leftclicking once with a mouse.
Double-tap
(double-click)
To run an item, quickly tap the item twice with your finger. This is the same as
double-clicking once.
Moving (drag)
To drag an item, place your finger over the item and drag it to the new location.
This is the same as dragging using a mouse.
Press and take off
(mouse right-click)
If you press and hold the screen for approximately 3 seconds, the pop-up menu
appears. This is the same as right-clicking with the mouse.
Tapping two fingers in
succession
(mouse right-click)
Tap with one finger and then tap with another finger while holding down the first
finger. A pop-up menu appears.
This is equivalent to right-clicking a mouse.
Move your finger up and down, left or right to move on the screen accordingly.
Moving finger
(scroll)
This is the scroll function of the mouse.
T his operation may perform a different function depending on the application
program.
16
Using the Applied Gestures
Using the Touch Feature
Touch Operation
Drag two fingers apart / together
(zoom-in/zoom-out)
Flick one finger fast
(page move)
Quickly draw with two fingers
(this runs the Touch Launcher)
Function
Drag apart or together two fingers to zoom-in or -out of a picture or image.
Flick one finger quickly to the left or right in order to move to the previous or
next page.
By quickly drawing a line from top to bottom with two fingers, the Touch
Launcher program is launched.
Tapping three fingers
(Launching the Touch
Tapping three fingers simultaneously launches the touch supporter program.
Supporter)
Tapping five fingers
(Launching the keyboard
Tapping fi ve fingers simultaneously launches the keyboard program.
program)
Learning about touch operations
Select Start > Control Panel > Hardware and Sound > Pen and Touch > Flicks tab and select Practice using flicks to learn about
the various touch operations.
17
Screen Calibration
Using the Touch Feature
When you use the touch screen for the fi rst time or the pointer on the screen does not precisely match the points you touch,
calibrate the touch screen using the Tablet PC Settings menu.
Screen Calibration
2
The calibration process for the touch screen may differ depending
on the operating system and may not be available in some operating
systems. The following descriptions assume the Windows 7 operating
system.
1
Select the screen type to calibrate. If the Calibration screen
appears, touch the point represented by the “+” mark and then
remove your finger.
The “+” mark appears sequentially from the top left to the
bottom right of the screen.
Click Start > Control Panel > Hardware and Sound > Tablet PC
Settings > Display > Calibrate.
3
When the Do you want to save the calibration data? window
appears, click Yes.
The touch screen input points are calibrated.
18
Entering Letters Using the Touch Screen
Using the Touch Feature
You can enter letters using either the Tablet PC input panel.
Launching the Tablet PC Input Panel
Let’s learn how to enter letters in Notepad.
If you touch the touch screen with your finger, the Tablet PC Input Panel
appears with the cursor at the bottom left on the Desktop.
tab
1
Launching Notepad.
If you touch the Tablet PC Input Panel tab, the Tablet PC Input Panel
appears.
2
If you touch the
Notepad screen with your finger, the
appears on the Notepad with the cursor.
3
If you touch the
Panel appears.
Are you unable to find the Tablet PC
Input Panel tab
?
click start > Control Panel > Hardware and Sound > Tablet PC
Settings > Other tab and select [Go to Input Panel Settings],
select the “Use the Input Panel tab” in the Options window
and then click OK.
with your finger, the Tablet PC Input
Writing Pad Mode
Touch keyboard
Tools
Close
19
Entering Letters Using the Touch Screen
Entering Letters Using the Touch Screen
Using the touch keyboard, you can enter letters by touching the
corresponding keys on the keyboard that is displayed on the screen
as you do with a normal keyboard.
1
2
In the Tablet PC input panel, touch the touch keyboard icon
.
Enter letters by touching the corresponding keys on the screen.
20
Using the Touch Feature
Entering letters with the writing pad
(hand-writing input mode)
In the touch screen, you can enter letters by directly writing letters
with your finger on the writing pad input panel.
1
2
In the Tablet PC input panel, touch the writing pad icon
3
If you touch the Insert button, the converted letter is entered.
Write a letter in the input area of the writing pad in the touch
screen and wait for a moment. Then the letter is converted to
the most likely letter.
Modifying a letter
Over-write a new letter over an incorrectly recognized letter or
touch the
above the letter and select a letter.
.
Using the Touch Launcher
Using the Touch Feature
Touching the Launcher program enables you to easily play music and video files and operate downloaded applications by touching the screen
with your finger on models with a touch screen.
Touch Launcher Functions
On the touch screen, drag two fingers from top to bottom quickly.
Alternatively, Click Start > All Programs > Samsung > Play Touch and
to launch it.
select Touch Launcher
No.
Function
1
Power Option
Shows the remaining battery charge and
the currently confi gured battery mode.
2
WiFi
Shows the Wi-Fi connection status. If
the computer is connected to Wi-Fi, the
connected AP name is displayed.
3
ToDo
(Things to do)
4
Clock / Weather
Shows the time and weather information
for the confi gured region.
Edit Mode
You can move the program icons, add
groups, add/remove programs as well as
change the Desktop background.
1
2
3
4
5
5
To exit the Touch Launcher, touch
.
6
7
Description
Creates/Displays the ToDo list
You can create a list of things to do.
6
Page Indicator
Shows the position of the current page. To
navigate the pages, click the Page Indicator
or drag the screen to the left or the right.
7
Program area
Shows the program list. To launch a
program, click the program icon.
21
Using the Touch Launcher
Launching a Program
To launch a program added to the Touch Launcher, quickly touch a
program icon twice.
Using the Touch Feature
Navigating Pages
To navigate pages in the Touch Launcher (1), touch the page icon
or (2) flick one finger to the left or right.
(1)
(2)
22
Using the Touch Launcher기
Editing Program Icons
Using the Touch Feature
2
If the program icon changes to Edit mode
the new location.
3
To exit Edit mode, touch the Edit mode icon again.
, move the icon to
In Edit mode, you can add or remove a program, add a group, move
a program icon and change the background image.
To edit program icons
1
Touch the Edit mode icon.
23
Using the Touch Supporter
Using the Touch Feature
This program helps you to use functions that cannot be easily used with touch operations more easily.
Using the Touch Supporter
Using the Numeric Keypad
If you touch the screen with three fingers simultaneously the touch
support program is launched.
Ctrl
Ctrl+X
Del
Magnifier
Settings
The Numeric Keypad is to use numeric and direction keys only.
Touch the Numeric Keypad
on the screen.
1
2
Show/Hide
Hotkeys
Ctrl+C
Ctrl+V
To exit the Touch Supporter, click
fingers again.
Ctrl+Z
. The Numeric Keypad appears
If you touch the buttons on the Numeric Keypad,
the corresponding number or symbol is entered on the screen.
Numeric Keypad
or touch the screen with three
Switches the mode
between the numeric
and the direction key
input modes
What does the Ctrl key do (multiple selection mode)?
The icon performs the same function as the Ctrl key on the
keyboard. If you touch the Ctrl button, the button indicator
is turned on. While the Ctrl (multiple selection mode) icon
and you touch various files with your finger
is selected
sequentially, all the touched files are selected.
To select direction key input mode, touch
To select numeric key input mode, touch
.
.
24
Using the digitizer pen
Using the Touch Feature
If a digitizer pen is supplied with the product, you can operate the computer with the pen instead of your fi ngers.
You can use the digitizer pen as you would use your fi ngers.
Digitizer pen structure and functions
Pen tip
This performs the function of your finger tip when
you touch the screen.
If you press the pen button when the digitizer
pen tip is on the screen, circles appear around the
pointer on the screen. Touch the screen with the
digitizer pen while holding down the pen button.
Pen eraser
This performs the right-click function.
Pen button
Pen button
Ring
Erases letters with the top end of the digitizer Pen.
Pen tip
This performs the function of an eraser.
Pen tip
Pen eraser
25
Using the digitizer pen
Using the Touch Feature
Replacing the pen tip
If the pen tip is damaged, you can replace the pen tip as follows:
1
Hold the pen tip by inserting it into the hole of the ring and
remove the tip by pulling it out.
2
Insert the new pen tip into the digitizer pen.
Take care so that the pen tip does not spring out when taking
it out.
26
Using the Slate PC
Using the Slate PC
Using the Auto Screen Rotation Function
Adjusting the Volume
Wireless Network
Using the camera
Using the Bluetooth keyboard
Using the Slate PC Dock
27
Using the Auto Screen Rotation Function
Using the Slate PC
If the Auto Screen Rotation function is activated, the screen orientation automatically changes as the computer is rotated.
To disable the Auto Screen Rotation function
Press the Orientation Lock button. If the Orientation Lock function
is activated, the screen orientation does not change regardless of
the rotation of the computer.
To release the Orientation Lock function so that the screen
orientation is automatically changed, press the Orientation Lock
button again.
28
Adjusting the Volume
Using the Slate PC
29
You can control the volume using the volume control buttons or the volume control program.
Method 1 Adjusting the volume with the buttons
You can control the volume by pressing the volume control button
on the left side of the computer.
Method 2 A
djusting the Volume using the Volume
Adjustment Program
Click the Volume icon on the taskbar and slide the volume
control bar to adjust the volume.
+
_
Mute
Wireless Network
Using the Slate PC
If there is a nearby AP (Access Point), you can easily connect to a wireless LAN using the Easy Settings.
Connecting to a Wireless LAN through Easy
Settings
1
Click Start > All Programs > Samsung > Easy Settings.
2
Confi gure the Wireless Network and set the Wi-Fi device to ON.
Touch an AP in the AP list. If the computer is properly connected to
the wireless network, the wireless LAN icon appears in the system
tray.
z
x
c
If this option is set
to ON, the Wi-Fi
function will run.
AP List
30
Using the camera
Using the Slate PC
This product has 2 cameras(Optional). One is at the front and the other is at the back. Using the touch camera program,
you can conveniently take a picture or record a video using touch operations.
Using the Camera program
Click the Touch Launcher and launch the Camera.
, video
Select camera mode ( camera
Select the front or rear camera
Minimize
)
Exit
z
x
c
Select the resolution.
Take a
picture or
make a
recording
View the captured picture or video.
Open the folder to save the file with Explorer.
1
Touch the Select Front/Rear Camera
to select either the
front or the rear camera that you will use.
2
To take a picture, select camera mode. To record a video, select
video mode.
3
Touch the Take a Picture
record a video.
4
You can view the picture or recorded video through the
Preview function
or the Open the saved folder with
.
Explorer
/Record
to take a picture or
31
Using the Bluetooth keyboard
You can connect and use an external type keyboard.
Now let’s look at how to connect the Bluetooth wireless keyboard
(optional) provided by Samsung Electronics.
Using the Slate PC
Using the Bluetooth Wireless Keyboard
1
Remove the battery compartment cover at the back of the
computer.
Power Button
2
What is Bluetooth?
Bluetooth is wireless communications technology that
allows access to nearby devices such as another computer,
a cell phone, printer, keyboard, mouse, etc. without a cable
connection.
Install the battery and close the cover.
32
Using the Bluetooth keyboard
3
If you press and hold the keyboard power button for
3 seconds after starting the computer, the Bluetooth LED
will blink in blue.
4
Click
5
Select the keyboard to be connected and click Next.
Using the Slate PC
6
Enter the number displayed on the screen and press Enter. This
will connect the keyboard.
When the keyboard is connected, the blue Bluetooth LED of the
keyboard is turned off.
> Bluetooth Devices > Add a Device.
Now you can use the keyboard.
33
Using the Slate PC Dock
Using the Slate PC
By connecting the computer to the Slate PC Dock, you can use various types of ports.
Installing/Removing the Dock
Before installing a computer to the docking station, make
sure to disconnect all the cables connected to the computer.
Installing and separating the Slate PC Dock after turning the
computer off is recommended.
2
Align the computer connector of the Slate PC Dock and the
Slate PC Dock port at the bottom of the computer and connect
them.
Installing the Slate PC onto the Dock
1
Insert your fi nger into the groove on the side of the Slate PC
Dock to open the top cover of the Slate PC Dock.
Computer Connector
34
Using the Slate PC Dock
Using the Slate PC
Connecting headphones to the Dock
Ports Provided by the Dock
Using the Headphone jack
The back of the Dock
1
1
2
3
4
5
DC Jack
Wired LAN Port
Digital Video/
Audio Port
(HDMI)
USB Port
Headphone Jack
2
3
4
1
Right-click over the Volume Control icon
in the notification
area at the bottom right of the Desktop and select Playback
Devices. (Alternatively, click the Control Panel > Hardware and
Sound > Sound > Playback tab.)
2
Select the Speakers(USB audio), click Set Default and click OK.
5
A jack to connect the AC adapter that
supplies power to the computer.
Connect the Ethernet cable to this port.
You can connect an HDMI cable to this
port. Using this port, you can enjoy digital
video and audio on the TV.
You can connect USB devices to the USB
port such as a keyboard/mouse, digital
camera, etc.
Using the computer’s built-in speaker when the
computer is installing on the Dock
When the Dock is connected, the audio is output to the headphone
jack of the Dock. To use the computer’s built-in speaker when the
Dock is connected, configure it as follows.
1
Right-click over the Volume Control icon
in the notifi cation
area at the bottom right of the Desktop and select Playback
Devices. (Alternatively, click the Control Panel > Hardware and
Sound > Sound > Playback tab.)
2
Select the Speakers (Realtek High Defi nition Audio), click Set
Default and click OK.
A jack used to connect the headphones.
35
Rev 1.00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising