Samsung SP-R4232 User manual

Add to My manuals
16 Pages

advertisement

Samsung SP-R4232 User manual | Manualzz

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 1

List of Parts

Accessories Once you have unpacked your TV, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer.

Owner’s Instructions Remote Control (BN59-00462A) /

AAA Batteries

Power Cord

(3903-000144)

Anynet Cable

(BN39-00518A)

BN68-00766E-00

English-1

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 2

Connecting VHF and UHF Antennas

Antennas with 75-ohm Round Leads

If your antenna looks like this: it has 75-ohm round leads.

1 Plug the antenna lead into the ANT 2 IN (AIR IN) on the TV.

Use the antenna cable, an accessory included in the product package.

Connecting Cable TV

You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels.

Cable without a Cable Box

1 Plug the incoming cable into the ANT 1 IN (CABLE

IN) on the TV.

Use the antenna cable, an accessory included in the product package.

Cable with a Cable Box that Descrambles All Channels

1 Find the cable connected to the ANTENNA OUT terminal on your Cable box. This terminal might be labeled “ANT OUT”, “VHF OUT” or simply “OUT”.

2 Connect the cable to the ANT 1 IN (CABLE IN) on the TV.

Use the antenna cable, an accessory included in the product package.

English-2

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 3

Cable with a Cable Box that Descrambles Some (But Not All) Channels

To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store).

1 Find and disconnect the cable that is connected to the ANTENNA IN terminal of your Cable box. This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”. Connect this cable to a two-way splitter.

2 Connect a coaxial cable between an

OUT terminal of the splitter and the

IN terminal of the Cable box.

3 Connect a coaxial cable between the

ANTENNA OUT terminal of the

Cable box and the B-IN terminal of the RF (A/B) switch.

4 Connect a coaxial cable between the other OUT terminal of the Cable box and the A-IN terminal of the RF (A/B) switch.

5 Connect the last coaxial cable between the OUT terminal of the RF (A/B) switch and the ANT 1 IN (CABLE IN) on the TV.

After you've made this connection, set the A/B switch to the “A” position for normal viewing.

Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to

“B”, you will need to tune your Set-Top Box to the Cable box's output channel, which is usually channel 3 or 4.)

English-3

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 4

Connecting CableCARD

You must obtain a CableCARD from a local cable service provider.

TV

Power cord

From cable TV

Please insert the card as shown.

1 Insert the CableCARD into the “CableCARD” slot and the message “CableCARD Inserted” is displayed on the screen. If the channel information does not exist, the message “Updating

Channel List” is displayed during channel information configuration. It could take several minutes to update the channel information depending on your cable service provider.

2

3

The pairing information containing a telephone number, CableCARD ID, Host ID, and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

When the channel information configuration has finished, the message “Updating Completed” is displayed, indicating that the channel list is now updated.

4 The Channel list can now be displayed by pressing CH LIST button.

• Once the channel list has been updated, only the channels on the channel list can be selected.

• Remove the CableCARD by carefully pulling it out with your hands since dropping the

CableCARD may cause damage to it.

English-4

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 5

Connecting a VCR

Connecting a VCR to the Video or S-Video/Audio jack

Connect the Video/Audio cables between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output jacks on the VCR.

(Note: For better video, use an S-Video cable.)

TV

Power cord

VCR

• Please be sure to match the color coded input terminals and cable jacks.

Audio cable

Video cable

S-Video cable

Connecting a Camcorder

Viewing camcorder tapes

Connect a Video/Audio cable between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and the

VIDEO or S-VIDEO/AUDIO output jacks on the camcorder.

(Note: For better video, use an S-VIDEO cable.)

TV

Power cord Camcorder

• Please be sure to match the color coded input terminals and cable jacks.

Audio cable

Video cable

S-Video cable

English-5

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 6

Connecting a DVD Player

(480i, 480p)

Playing DVD

TV

DVD Player

Power cord

Component cable

Audio cable

1 Connect the Y, P

B

, P

R

(COMPONENT1, 2) input jacks on the TV to the Y, P

B

, P

R output jacks on the DVD player using a component cable.

2 Connect the AUDIO L/R (COMPONENT1, 2) input jacks on the TV to the AUDIO output jacks on the DVD player using a audio cable.

• Please be sure to match the color coded input terminals and cable jacks.

English-6

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 7

Connecting a DTV Receiver

(480p, 720p, 1080i)

This TV displays the optimum picture in 720p mode.

Watching DTV

TV

DTV Receiver

Power cord

Component cable

Audio cable

HDMI/DVI cable

1 Connect the cable or antenna to the antenna input jack on the DTV.

2 Connect the Y, P

B

, P

R

(COMPONENT1, 2) or HDMI input jack on the TV to the Y, P

B

, P

R or DVI output jacks on the DTV receiver using a component or HDMI/DVI cable.

3 Connect the AUDIO L/R (COMPONENT1, 2 or DVI AUDIO IN) input jacks on the TV with the

AUDIO output jacks on the DTV receiver using an audio cable.

• Please be sure to match the color coded input terminals and cable jacks.

English-7

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 8

Connecting to HDMI (High Definition

Multimedia Interface)

(480p, 720p, 1080i)

Watching DTV

1 Connect the cable or antenna to the antenna input jack on the DTV.

TV

2 Connect the HDMI input jack on the TV with the HDMI output jack on the DTV

Set-Top Box using an

HDMI cable.

Power cord

HDMI cable

DTV Set-Top Box

• Please make sure the HDMI source’s power is on before selecting HDMI from the

“Source List” on the TV.

Connecting a Digital TV Set-Top Box

(480p, 720p, 1080i)

By inputting a high-bandwidth digital content protection High-Definition picture source to the HDMI input jack on the TV, High-Definition pictures can be displayed on the screen in their digital form.

Connecting to HDMI (High Definition Multimedia Interface)/DVI Compatible

1 Connect the DVI

AUDIO (L, R) input jacks on the TV with the AUDIO output jacks on the

Set-Top Box using an audio cable.

TV

Power cord DTV Set-Top Box 2 Connect the HDMI input jack on the

TV and the VIDEO output jack on the

Set-Top Box using an HDMI/DVI cable.

From cable or Antenna HDMI/DVI cable

Audio cable

English-8

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 9

Connecting a Digital Audio System

There are many types of digital audio systems on the market today.

A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual.

TV

Power cord Digital Audio System

Coaxial cable

Optical cable

1

2

3

If your audio system has a coaxial digital audio input, connect to the “COAXIAL” output jack on the TV.

If your audio system has a optical digital audio input, connect to the “OPTICAL“ output jack on the TV.

Be certain to remove the black cover from the optical output before inserting the cable.

If your system has both coaxial and optical digital audio inputs, SAMSUNG recommends you use the optical digital output on the TV.

Do not connect both optical and coaxial cables. This may damage your audio system.

OPTICAL: converts the electric signal into an optical light signal, and transmits it through glass fibers.

COAXIAL: The digital audio signal is received through a coaxial copper cable.

English-9

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 10

Connecting to an Analog Amplifier

1 The “AUDIO OUT

(AUDIO L/R)” terminals cannot be used for external speakers.

You must hook them up to an amplifier.

When an audio amplifier is connected to the

“AUDIO OUT

(AUDIO L/R)” terminals:

Decrease the gain

(volume) of the audio amplifier, and adjust the volume level with the volume control on the TV.

TV

Power cord

Audio cable

Analog Amplifier

Connecting a PC

Connection to a Macintosh computer may require an adapter.

Connecting a PC (15p D-SUB) to the TV

1 Connect a PC cable between the

PC Output jack on the PC and the

RGB input jack

(PC IN) on the TV.

TV

2 Connect a Audio cable between the

Audio jack on the

PC and the Audio input jacks (PC

AUDIO IN) on the

TV.

Power cord

Audio cable

PC cable

• Please be sure to match the color coded input terminals and cable jacks.

• A PC will not operate when connected with a

HDMI/DVI cable.

PC

English-10

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 11

Remote Control Buttons

Remote Control

ΠPOWER button

Turns the TV on and off.

´ GUIDE button

Press to display the on-screen

Electronic Program Guide (EPG).

ˇ ANTENNA button

Press to select “Air” or “Cable”.

¨ Number buttons

ˆ - button

Press to select additional channels

(digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “-” and “3”.

Ø MUTE button

Press to mute the TV sound.

∏ VOL (Volume) buttons

Use it to adjust volume.

” Anynet button

Runs the Anynet view functions and sets up Anynet devices.

’ MENU button

Displays the main on-screen menu.

˝ ENTER button

Confirms a selection.

Ô FAV.CH button

Press to switch to your favorite channels.

 CH LIST button

Displays the channel list.

Ò MODE button

Selects a target device to be controlled by the Samsung remote control (i.e., TV, STB, VCR, CABLE, or DVD).

Ú PRE-CH button

Tunes to the previous channel.

Æ SOURCE button

Press to display all of the available video sources (TV, AV, S-VIDEO,

COMPONENT1, COMPONENT2, PC, and HDMI).

ı CH (Channel) buttons

Use it to switch channels.

˜ INFO button

Press to display information on the

TV screen.

¯ EXIT button

Press to exit the menu.

˘ Up/Down/Left/Right buttons

Control the cursor in the menu.

¿ P.MODE button

Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings).

¸ S.MODE button

Select Sound effect.

˛ E.SAVING button

Press to adjust screen brightness according to surrounding environment.

◊ P.SIZE button

Select Picture size.

± DNIe button

Activates DNIe (Digital Natural

Image engine).

≠ MTS button

Press to choose stereo, mono or

Separate Audio Program

(SAP broadcast).

– SET button

Used during set up of this Samsung remote control, so that it will work compatibly with other devices (VCR,

Cable Box and DVD).

— PIP button

Activates picture in picture.

÷ PIP control buttons

CH , : Displays the available channels in sequence.

(These buttons change channels in the PIP window only.)

® CAPTION button

Controls the caption decoder.

∑ VCR, DVD control buttons

Controls VCR tape or DVD disc functions: Stop, Rewind,

Play/Pause, and Fast Forward.

µ RESET button

If your remote control is not functioning properly, take out the batteries and press the reset button for about 2~3 seconds.

Re-insert the batteries and try using the remote control again.

English-11

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 12

Turning the TV On and Off

Press the POWER button on the remote control.

The TV will be turned on and you will be able to use its features. You can also use the Power button on the front of the TV.

• If your TV isn’t turned on when the power button is pressed: Press the MODE button to check if the TV mode has been chosen.

Viewing the Menus and Displays

Your TV has a simple, easy-to-use menu system that appears on the TV screen.

This system makes it convenient and fast to use features on the TV.

Your TV also lets you display the status of many of your TV’s features.

Viewing the Menus

1 With the power on, press the MENU button on the remote control. The main menu appears on the screen.

The Input menu is selected.

T V

Source List : TV

Edit Name

Anynet

Input

Move Enter Return

2 Press the ▲ or ▼ button to move to items in the menu.

Press the œ/√/ENTER buttons to display, change, or use the selected items.

Press the ENTER ( ) button to enter items in the menu. On screen menus disappear from the screen automatically after about two minutes or you can press the MENU or EXIT button on your remote control to exit the menu.

Displaying Status Information

Press the INFO button on the remote control.

The TV will display the mode, Sound mode, MTS,

V-Chip, and Current Time.

AIR 28

Mono

Mode : Dynamic

Sound Mode : Custom

MTS : Stereo

V-Chip : Off

12 : 00 am

English-12

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 13

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits.

There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting a broadcast source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.

T V

2

3

Press the

Press the

▲ or ▼ button to select “Auto Program”, then press the ENTER button.

▲ or ▼ button to select the antenna connection, then press the ENTER button.

Notes

• Air : “Air” antenna signal.

• Cable : “Cable” antenna signal.

• Air + Cable : “Air” and “Cable” antenna signals.

If the CableCARD is inserted into the “CableCARD” slot on the rear panel, “Cable” and “Air + Cable” are not available.

T V

T V

T V

Antenna

Auto Program

Add / Delete

Favorite Channels

Name

Fine Tune

† More

Channel

: Air

Move Enter

Antenna

Auto Program

Add / Delete

Favorite Channels

Name

Fine Tune

† More

Move

Channel

: Air

Enter

Auto Program

Select the antennas to memorize

Air

Cable

Air + Cable

Start

Start

Start

Return

Return

Move Enter

Auto Program

Select the antennas to memorize

Air

Cable

Air + Cable

Start

Start

Start

Return

Move Enter Return

English-13

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 14

When selecting Cable TV system :

Press the ▲ or ▼ button to select “Cable” or “Air + Cable”, then press the ENTER button.

Press the press the ENTER button.

Press the press the ENTER button.

Press the

▲ or ▼ button to select “Digital Channel”, then

▲ or ▼ button to select “STD”, “HRC”, or “IRC”,

▲ or ▼ button to select “Analog Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “STD”, “HRC”, or “IRC”, press the ENTER button.

Press the ▲ or ▼ button to select “Start”, then press the

ENTER button to memorize the channels.

T V Auto Program

Select the cable system.

Digital Channel

Analog Channel

Start

: STD

: STD

T V

Move Enter

Auto Program

Select the cable system.

Digital Channel

Analog Channel

Start

: STD

IRC

Return

T V

Move Enter

Auto Program

Select the cable system.

Digital Channel

Analog Channel

Start

: STD

IRC

Return

T V

Move Enter

Auto Program

Select the cable system.

Digital Channel

Analog Channel

Start

: STD

: STD

Return

• STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to

“Storing Channels in Memory” on page 43 of the instruction manual.

Move

Stop

Enter

Enter Return

Auto Program

Auto Program in Progress.

CABLE Channel 67

Return

English-14

BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 15

Storing Channels in Memory

4 Press the ▲ or ▼ button to select the antennas to memorize. Press the ENTER button to select “Start”.

T V Auto Program

Select the antennas to memorize

Air

Cable

Air + Cable

Start

Start

Start

Move Enter Return

5 In Air, press the ENTER button to start the auto program. In Cable or Air + Cable, press the ENTER button to select the cable system.

Press the ▲ or ▼ button to select “Digital Channel or

Analog Channel”, then select the cable system.

Press the ▲ or ▼ button to select “Start” and press the ENTER button to start the auto program.

T V Auto Program

Select the cable system.

Digital Channel

Analog Channel

Start

: STD

: STD

Move Enter Return

6 The TV begins memorizing all available stations.

Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit.

Note

• The TV must be connected to an antenna in order to receive digital TV signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control.

Auto Program

Auto Program in Progress.

Stop

Enter

AIR Channel 67

• All available DTV and analog channels are automatically stored in memory when channels are selected by directly accessing channels.

• It takes approximately 3 to 10 minutes to memorize channels.

Return

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment, such as VCR,

DVD, Set-Top Box, and the TV source (broadcast or cable).

Setting the Signal Source

1 Press the MENU button.

Press the ENTER button to select “Input”.

➤ Quick way to access viewing an external signal source :

Just press the “SOURCE” button on the remote control.

T V

Source List : TV

Edit Name

Anynet

Input

2 Press the ENTER button to select “Source List”.

T V

Move Enter

Source List

TV

AV

S-Video

Component 1

Component 2

PC

HDMI

Move

: ----

: ----

: ----

: ----

: ----

: ----

Enter

Return

Return

English-15

BN68-00766E-00Eng_0214 2/14/05 5:28 PM Page 16

3 Press the ▲ or ▼ button to select signal source, then press the ENTER button.

4 Press the MENU button to exit.

The image is too light or too dark.

The image is too large or too small.

Digital broadcasting screen problem.

Screen is black and power indicator light blinks steadily.

Adjust the Size settings.

T V

TV

AV

S-Video

Component 1

Component 2

PC

HDMI

Move

Source List

: ----

: ----

: ----

: ----

: ----

: ----

Enter Return

• When you connect equipment to the TV, you can choose between the following sets of jacks:

AV, S-VIDEO, COMPONENT 1, COMPONENT 2,

PC, or HDMI on the TV’s rear panel.

• HDMI input can only be selected when the external device is turned on.

Troubleshooting

If the TV seems to have a problem, first try this list of possible problems and solutions.

If none of these troubleshooting tips apply, then call your nearest service center.

Problem

Poor picture.

No picture or sound.

Poor sound quality.

Your remote control does not operate the TV.

The TV won’t turn on.

There is no screen image.

Possible Solution

Check all wire connections.

Try another channel. Press the SOURCE button.

Make sure the TV is plugged in.

Check the antenna connections.

Try another channel.

Adjust the volume.

Press the “MODE” button to put your remote control in the “TV” mode.

Check if the power plug is connected.

Check to see that both the TV and the source are plugged in and turned on.

Adjust the Brightness or Contrast settings.

Please check the digital signal strength and input antenna.

On your computer check; Power, Signal Cable.

The TV is using its power management system.

Move the computer’s mouse or press any key on the keyboard.

On your equipment check (STB, DVD, etc) ; Power,

Signal Cable.

The TV is using its power management system.

Press the Source button on the panel or remote control.

Turn the TV off and on.

English-16

advertisement

Related manuals

advertisement