Yamaha | DVD-C920 | manual | DVD-C920 - Yamaha Corporation

U
DVD-C920
DVD AUDIO/VIDEO CHANGER
DIGITAL VIDEO
NATURAL SOUND
DVD AUDIO/VIDEO PLAYER
POWER
GROUP
VIDEO OFF PROGRESSIVE ON
PLAYXCHANGE
PROGRESSIVE
VIDEO OFF
DISC SKIP
D I G I TA L
SURROUND
DOLBY
D I G I T A L
DIGITAL VIDEO
OWNER’S MANUAL
001-C920(U)H1
3
12/24/1, 11:55 AM
IMPORTANT SAFETY INSTRUCTIONS
1
Read these instructions.
CAUTION
2
Keep these instructions.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11
Only use attachments/accessories specified by the
manufacturer.
12
Use only with the cart, stand, tripod,
bracket, or table specified by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the
cart/apparatus combination to avoid injury
from tip-over.
13
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert you to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
CAUTION
002-C920(U)Caut
2
12/24/1, 11:55 AM
IMPORTANT SAFETY INSTRUCTIONS
FCC INFORMATION (for US customers only)
Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit “OFF”
and “ON”, please try to eliminate the problem by using
one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
INTRODUCTIOIN
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance
with these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line filter/
s.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not
locate the appropriate retailer, please contact Yamaha
Electronics Corp., U.S.A. 6660 Orangethorpe Ave,
Buena Park, CA 90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
PLAYBACK
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
PREPARATIONS
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300
ohm ribbon lead, change the lead-in to coaxial type
cable.
We Want You Listening For A Lifetime
CAUTION
- VISIBLE AND / OR INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
VARNING
- SYNLIG OCH / ELLER OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.
VARO !
VARNING
AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA / TAI
NÄKYMÄTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
- SYNLIG OCH / ELLER OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.
SICHTBARE UND / ODER UNSICHTBARE LASERSTRAHLUNG
WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
ATTENTION - RADIATION VISIBLE ET / OU INVISIBLE LORSQUE L'ALLAREIL
EST OUVERT. EVITEZ TOUTE EXPOSITION AU FAISCEAU.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
APPENDIX
VORSICHT !
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume
levels.
SETUP MENU
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring
or distortion – and, most importantly, without affecting your
sensitive hearing.
MAIN
R
L
SORROUND
CENTER
SUB
WOOFER
6CH
DISCRETE
L
1
PR
AUDIO OUT
IN
2
Y
PB
COMPONENT VIDEO OUT
S VIDEO
VIDEO
VIDEO OUT
COAXIAL
OPTICAL
PCM/
DTS
DIGITAL
REMOTE
CONTROL
(Australia model)
CAUTION
002-C920(U)Caut
3
12/24/1, 11:55 AM
English
OUT
R
MIXED 2CH
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
3
4
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
Install this unit in a well ventilated, cool, dry, and clean
place with at least 5 cm above, behind and on the both
sides of this unit - away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
Position this unit away from other electrical appliances,
motors and transformers to avoid humming sounds, do
not place this unit where it may get exposed to rain or
any kind of liquid to prevent fire or electrical shock.
Avoid extreme temperature swings or excessive use of
humidifier in the room where this unit is installed to
prevent condensation inside this unit, which may cause
an electrical shock, fire damage to this unit, and/or
personal injury.
5
Do not cover this unit with a newspaper, a tablecloth, a
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit and/or personal injury.
6
Avoid installing this unit in a place where foreign objects
and liquid might fall. It might cause a fire, damage to this
unit and/or personal injury. Do not place the following
objects on this unit:
• Other components, as they may cause damage and/or
discoloration on the surface of this unit.
• Burning objects (i.e., candles), as they may cause fire,
damage to this unit and/or personal injury.
• Containers with liquid in them, as they may cause an
electrical shock to the user and/or damage to this unit.
7
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
8
Do not use force on switches, controls or connection
cables. Never pull the cables when disconnecting them.
9
Only voltage specified on this unit must be used. Using
this unit with a higher voltage than specified is dangerous
and may result in fire or other accidents. YAMAHA will not
be held responsible for any damage resulting from the
use of this unit with a voltage other than that specified.
10 Do not attempt to clean this unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
11 Disconnect the power cord from the wall outlet when not
planning to use this unit for a long period of time, or
during an electrical storm, as they may cause damage by
lightning.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
DANGER
Visible laser radiation when open. Avoid direct exposure to
beam.
When this unit is plugged to the wall outlet, do not place your
eyes close to the opening of the disc tray and other openings
to look into inside.
Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
This unit is designed for home use only. Do not use this unit
for business purposes.
Be sure to place this unit on a level surface. If not so, this
unit will fail to work normally at the PLAYXCHANGE
operation and cause damage to the disc(s) and this unit itself.
Caution for moving this unit
• When moving this unit, first remove all discs from the disc
table and close the table by pressing the OPEN/CLOSE
button, and then switch off the power after you confirm that
the front panel display indicates as follows.
2 3 4 5
OO:OO:OO
Never switch off the power if the front panel display is not
pictured as above, otherwise the unit will break down
during moving because the internal mechanism is not
locked.
• When moving this unit, be sure to first disconnect the
power cord from the AC outlet and disconnect all cords
connecting this unit to other equipment.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
12 Do not attempt to modify or fix this unit. Contact the
qualified YAMAHA service personnel when any service is
needed. Cabinet should never be opened for any
reasons.
13 Be sure to read ‘TROUBLESHOOTING’ section
regarding common operating errors before concluding
that this unit is faulty.
CAUTION
100-C920(E)Caution
2
12/24/1, 11:55 AM
INTRODUCTION
FEATURES
● Dolby Digital and DTS decoders
● Compatible with almost all features of DVD discs
(Multi-angle, Multi-language, Parental control, etc.)
● Easy operation through on-screen menu
● Multi-speed playback capability
● Progressive video output capability (U.S.A. and Canada
models)
● Component Video and S-Video outputs for high picture
quality
INTRODUCTION
PREPARATION
SETUP MENU
SETUP MENU ............................................. 25
Operating the setup menu ........................... 25
Summary of settings ................................... 26
Language selection and language code list
................................................................ 27
Ratings ........................................................ 28
PCM down conversion ............................... 28
Speaker settings .......................................... 28
APPENDIX
TROUBLESHOOTING .............................. 30
SPECIFICATIONS ....................... Back cover
PLAYBACK
Note
• The illustrations of the player and the remote control used in this
manual show U.S.A. and Canada model. Australia model is not
equipped with the ‘progressive’ feature, and the related controls
and printings on the illustrations are not applicable.
English
1
101-C920(E)01
1
APPENDIX
BASIC OPERATION .................................. 11
Before starting play .................................... 11
Playing a disc ............................................. 11
Multi-speed play ......................................... 13
Using a disc’s menu ................................... 14
Enhancing video quality ............................. 14
DVD-Audio features .................................. 15
Enhancing audio quality ............................. 15
Switching audio tracks, subtitles and angles
................................................................ 16
SPECIFYING THE PLAY SEQUENCE ... 17
Repeat play ................................................. 17
Repeat A-B ................................................. 18
Random play .............................................. 18
Programmed play ....................................... 19
Bookmarks ................................................. 20
SETUP MENU
REMOTE CONTROL .................................. 7
Installing batteries in the remote control ...... 7
Using the remote control .............................. 7
CONNECTIONS ........................................... 8
Audio connections ........................................ 8
Video connections ........................................ 9
Remote control in/out terminals ................. 10
Power supply cord ...................................... 10
ON-SCREEN MENU .................................. 21
Operating menu bar .................................... 21
Icons for disc menu .................................... 22
Shuttle screen ............................................. 22
Icons for player menu ................................. 23
PLAYBACK
FEATURES .................................................... 1
GETTING STARTED ................................... 2
Checking the package contents .................... 2
Disc information ........................................... 2
CONTROL REFERENCE GUIDE ............. 4
Front panel/remote control ........................... 4
Display ......................................................... 6
PREPARATION
CONTENTS
INTRODUCTION
● 5-Disc Auto-changer for playing DVD-Audio, DVDVideo, audio CD and Video CD
● CD-R and CD-RW play compatibility
● MP3 format supported
● PLAYXCHANGE; Disc changing capability while
playing another
● 1 OPTICAL and 1 COAXIAL digital outputs for Dolby
Digital, DTS, MPEG and PCM
● 96 kHz, 24 bit audio DAC for high sound quality
12/24/1, 11:55 AM
GETTING STARTED
Checking the package contents
Check that the following items are included in your package.
Remote control
OPEN/CLOSE
PLAY MODE REPEAT
SUBTITLE
A–B
AUDIO
OPEN/CLOSE
MARKER
PLAY MODE REPEAT
ANGLE
TOP MENU
SUBTITLE
MENU
TOP MENU
RETURN
ON SCREEN
PAUSE
STOP
Batteries (AA, R06, UM-3)
RCA pin cable (audio/video)
ENTER
PLAY
SKIP
MARKER
ANGLE
MENU
ENTER
ON SCREEN
STOP
A–B
AUDIO
SLOW/SEARCH
1
2
3
5
6
7
9
0
10
VIDEO OFF
GROUP
PAGE
DISC1
DISC2
DISC4
DISC5
RETURN
PLAY
SKIP
PAUSE
SLOW/SEARCH
4
1
2
3
8
5
6
7
9
0
10
VIDEO OFF
GROUP
PAGE
DISC1
DISC2
DISC4
DISC5
CANCEL
4
8
CANCEL
PROGRESSIVE
SET UP
DISC3
SET UP
DISC SKIP
(U.S.A. and Canada models)
DISC3
DISC SKIP
(Australia model)
Disc information
This DVD changer is designed for use with following types
of disc only. Never attempt to load any other type of disc
into this unit because it may damage this unit.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
D I G I TA L
SURROUND
DIGITAL VIDEO
In this manual, the type of discs are indicated as below.
DVD-Video
DVD-Audio
Video CD
Audio CD
DVD-V
DVD-A
VCD
CD
Notes
• This unit is not compatible with Photo-CD, CD-ROM, DVDROM, DVD-RAM, SVCD, CDV, etc. (some DVD-R, DVD-RW
and DVD+RW can be played).
• Be sure to use only CD-R and CD-RW discs made by reliable
manufacturers. Some discs cannot be played depending on the
disc characteristics or recording conditions.
• Do not use any non standard shaped discs (heart, etc.).
• Do not use disc with tape, seals, or paste on it, damage to the unit
may result.
• Some DVD and VCD features described in this manual may not
be available or may operate in a different way because they are
subject to software producer’s design. Check each disc’s
instruction.
Example:
‘ ’ appears when you press the skip buttons to move to the next
section.
Manufactured under license from Digital Theater
Systems, Inc. US Pat. No.5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-wide patents
issued and pending. “DTS” and “DTS Digital Surround”
are registered trademarks of Digital Theater Systems,
Inc. Copyright 1996,2000 Digital Theater Systems, Inc.
All Rights Reserved.
“DCDi” is a trademark of Faroudia, a division of Sage
Inc.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
2
102-C920(E)02-06
2
12/25/1, 2:45 PM
GETTING STARTED
■ Region management information DVD-V
This DVD player is designed to meet DVD standard that supports region management system. Check the regional code
number marked on the disc packages. If the number does not match this unit’s region number (see the below table or the back
of this unit), this unit refuses to play that disc.
Region number of this unit
Discs can be played
1
1
,
ALL
or a mark which includes
the region number ‘1’.
4
4
,
ALL
or a mark which includes
the region number ‘4’.
INTRODUCTION
Model
U.S.A. and Canada models
Australia model
• Hold discs by touching only the edges or center hole.
No!
PLAYBACK
• When a disc is not currently being loaded on the disc
tray, store it in an appropriate case.
• Playback of discs is generally not affected by small
particles of dust or fingerprints on their playing surface.
Even so, they should be kept clean. Wipe by using a
clean, dry cloth. Do not wipe with a circular motion;
wipe straight outward from the center.
• Do not try to clean the disc’s surface by using any type
of disc cleaner, record spray, anti-static spray or liquid,
or any other chemical-based liquid, because such
substances might irreparably damage the disc’s surface.
• Do not expose discs to direct sunlight, high temperature
or high humidity for a long period of time, because these
might warp or otherwise damage the disc.
SETUP MENU
■ MP3 playback
Title
(Album)
Title
(Album)
1 2 3 4 5 6 7 8 9
Chapter (Track)
Total chapter number
C
1/ 59
Current chapter
0 : 01
Elapsed play time (display only, you
cannot use ‘time index’ feature.)
English
• Starting play from a selected chapter
Select a chapter using the numeric buttons (see ‘To select
a specific track’ in p.13) and press ENTER.
3
3
APPENDIX
This unit can play MP3 format audio recorded for personal use with a computer etc. onto CD-R or CD-RW. Play may not be
possible in some cases due to the condition of the recording.
Discs recorded using MP3 differ to CDs in the following ways.
• Repeat play
• Structure of the disc (example)
You can use chapter repeat or title repeat.
Since the MP3 format can store several albums on a disc,
• Programmed play, random play
an album is assigned to a ‘Title’, and a track is assigned
You cannot use programmed play and random play.
to a ‘Chapter’.
• On-screen icons for disc information during play
102-C920(E)02-06
PREPARATIONS
■ Notes about handling discs
12/24/1, 11:55 AM
CONTROL REFERENCE GUIDE
Front panel/remote control
Front Panel
1
3
2
POWER
GROUP
VIDEO OFF PROGRESSIVE ON
PLAYXCHANGE
PROGRESSIVE
DISC SKIP
VIDEO OFF
e
w q 0 9 87 6 54
(U.S.A. model)
Remote Control
1 POWER
Press to turn the power on and off.
t
OPEN/CLOSE
r
i
o
a
f
5
9
PLAY MODE REPEAT
SUBTITLE
A–B
AUDIO
MARKER
ANGLE
TOP MENU
MENU
ENTER
ON SCREEN
RETURN
STOP
PLAY
SKIP
PAUSE
SLOW/SEARCH
1
2
3
4
5
6
7
8
9
0
10
VIDEO OFF
GROUP
PAGE
DISC1
DISC2
u
2 Disc tray
3
y
p
s
d
g
7
Up to 5 discs can be loaded on this tray.
6
h
j
Press to pause.
k
w
l
q
8 PROGRESSIVE ON: front panel
PROGRESSIVE: remote control
[U.S.A. and Canada models only] ...(p.14)
3 v (OPEN/CLOSE)
Press to open and close the disc tray.
4 PLAYXCHANGE (p.12)
5 a (STOP)
Press to stop playback.
6 d (PAUSE)
7 w (PLAY)
Press to start playback.
CANCEL
0
8
;
PROGRESSIVE
SET UP
DISC3
DISC SKIP
DISC4
DISC5
9 t/e, r/y
(SKIP, SLOW/SEARCH): front panel
t, y (SKIP),
e, r (SLOW/SEARCH): remote control
...(p.13)
0 VIDEO OFF (p.15)
(U.S.A. model)
q DISC SKIP
Press to select another disc.
4
102-C920(E)02-06
4
12/24/1, 11:55 AM
CONTROL REFERENCE GUIDE
w GROUP (p.15)
d Cursor buttons, ENTER
e Display panel
Use to select and determine an item on menu screen, etc.
f ON SCREEN (p.21)
r PLAY MODE
t REPEAT (p.17)
Press to turn the on-screen icons on and off on the video
monitor.
INTRODUCTION
Press to switch among random play, program play, and
normal play.
g RETURN (p.14, 21, 25)
y MARKER (p.20)
Press to go back to the previous screen when operating in
the menu screen.
u A-B (p.18)
h Numeric buttons
Use to select a title, chapter, track, etc.
i SUBTITLE (p.16)
j CANCEL
Press to cancel a specific mode or a setting.
p ANGLE (p.16)
k PAGE (p.15)
a TOP MENU
l DISC 1, 2, 3, 4, 5
Press to go to the initial screen when operating in the menu
screen.
Press to play the disc loaded on the guide of the corresponding number.
s MENU (p.14)
; SET UP (p.25)
Press to call up menu screen contained in the disc.
Press to call up the setup menu screen.
PREPARATIONS
o AUDIO (p.16)
PLAYBACK
SETUP MENU
APPENDIX
English
5
102-C920(E)02-06
5
12/24/1, 11:55 AM
CONTROL REFERENCE GUIDE
Display
1
23 4
5
6
7
1 2 3 4 5
PROG RND REP15DISC A–B MPEG PCM VSS
MP3 GROUP TITLE TRACK CHAP
ANGLE DMIX PPCM MLTCH
VCD
DVD
AUDIO
VIDEO
D
OOOOOOOOOOOO
8 9, 0, q
1
w
e
8 Disc type indicators
1 2 3 4 5
One of these numbers lights up to show the currently
selected disc, which is loaded on the guide of the corresponding number.
Indicates the type of disc. For example, DVD and AUDIO
lights up when playing a DVD-Audio disc.
2w
Lights up during playback.
The current (or programmed) group number appears below
the indicator.
3d
0 TITLE, CHAP DVD-V
Lights up while playback is paused.
Lights up during program play.
The current (or programmed) title number and chapter
number appears below each indicator. TITLE (or CHAP)
also lights up with REP indicator when repeating a title (or a
chapter).
5 RND
q TRACK DVD-A VCD CD
4 PROG
Lights up during random-sequence play.
6 Repeat mode indicators
• REP and A-B light up when repeating between the two
points you have specified.
• REP and 1 DISC light up when repeating the currently
selected disc.
• REP and 5 DISC light up when repeating all the discs
loaded on the disc tray.
7 Audio type indicators
t, qD (=dolby digital), MPEG, PCM (=linear PCM),
PPCM (=packed PCM):
Indicates the audio format of a disc. When a disc
contains several different formats, the currently
selected format lights up.
MLTCH: Lights up when a multi-channel audio track is
playing.
DMIX: Lights up to show that the currently playing
multi-channel audio track can be mixed down into
2 channels – does not mean that the track is
actually down-mixed. With some DVD-Audio
discs, 2 channels down-mix is prohibited and the
indicator does not light up while playing the disc.
VSS:
Lights up when the virtual surround feature is
turned on.
9 GROUP DVD-A
The current (or programmed) track number appears below
the indicator. It also lights up with REP indicator when
repeating a track.
w Multi-information display
Shows various information such as title, chapter or track
number, elapsed playing time etc.
e ANGLE
Lights up when the scene currently played contains different
angle(s).
6
102-C920(E)02-06
6
12/24/1, 11:55 AM
PREPARATION
REMOTE CONTROL
1
Turn the remote control over and slide the
battery compartment cover in the direction of
the arrow.
2
Insert the batteries (AA, R06, UM-3 type)
according the polarity markings on the inside
of the battery compartment.
3
Close the battery compartment cover.
1
2
If the remote control operates only when it is close to the unit, the batteries are weak. Replace all the batteries with new ones.
Notes
•
•
•
•
PREPARATION
3
INTRODUCTIOIN
Installing batteries in the remote control
Use only AA, R06 or UM-3 batteries for replacement.
Be sure the battery polarity is correct. (See the illustration inside the battery compartment.)
Remove the batteries if the remote control will not be used for an extended period of time.
If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
POWER
GROUP
VIDEO OFF PROGRESSIVE ON
PLAYXCHANGE
PROGRESSIVE
VIDEO OFF
DISC SKIP
Notes
Within approximately 6 m
(20 feet)
30°
30°
•
•
•
•
APPENDIX
Handle the remote control with care.
Do not spill water, tea or other liquids on the remote control.
Do not drop the remote control.
Do not leave or store the remote control in the following
conditions:
– high humidity or temperature such as near a heater, stove or
bath;
– dusty places; or
– extremely low temperature.
SETUP MENU
Remote control sensor
The remote control transmits a directional infrared beam. Be
sure to aim the remote control directly at the infrared sensor
during operation. When the sensor is covered or there is a
large object between the remote control and the sensor, the
sensor cannot receive signals. The sensor may not be able to
receive signals properly when it is exposed to direct sunlight
or a strong artificial light (such as a fluorescent or strobe
light). In this case, change the direction of the light or
reposition the unit to avoid direct lighting.
PLAYBACK
Using the remote control
English
7
103-C920(E)07-10
7
12/24/1, 11:55 AM
CONNECTIONS
CAUTION
• Never connect this unit and other equipment to power supply until all connections have been completed.
Be sure all connections are made correctly, observing the color-coding of terminals of both this unit and the equipment to be
connected. Also refer to the instructions of the equipment to be connected.
Audio connections
■ Digital outputs
6CH
DISCRETE
L
1
This unit has COAXIAL and OPTICAL digital output
terminals. Connect one of them to your AV amplifier
equipped with Dolby digital, DTS, or MPEG decoder using
each specific cable (separate purchase).
PR
R
MIXED 2CH
2
Y
S VIDEO
PB
COMPONENT VIDEO OUT
(480p/480i)
AUDIO OUT
VIDEO
COAXIAL
OPTICAL
PCM/
DTS
DIGITAL
VIDEO OUT
O
C
Required Audio settings (See p.25, 26 and 27):
• Digital Audio Output ^ On
• PCM Down Conversion, Dolby Digital, DTS Digital
Surround, MPEG ^ Verify your AV amplifier’s capability.
AV amplifier
INPUT
VOLUME
INPUT M0DE
NATURAL SOUND AV RECEIVER
6CH INPUT
COAXIAL OPTICAL
IN
IN
D I G I TA L
PRO LOGIC
STANDBY
/ON
B
A/B/C/D/E
PRESET/
TUNING
STEREO
PROGRAM
PRESET
/TUNING
FM/AM MEMORY
BASS
TUNING
MODE
TREBLE
TUNER
PROCESSOR
BASS
DIRECT
EXTENSION
SPEAKERS
A
MAN'L/AUTO FM AUTO/MAN'L MONO
EDIT
PHONES
S VIDEO
VIDEO
L
AUDIO
R
OPTICAL
DSP
EFFECT
SILENT
–
VIDEO AUX
+
–
+
Subwoofer
Center speaker
Left main
speaker
Right main
speaker
Left rear
speaker
Right rear
speaker
R
■ Analog outputs
A 6CH DISCRETE terminals
L
MAIN
SURROUND
INPUT
VOLUME
INPUT M0DE
NATURAL SOUND AV RECEIVER
6CH INPUT
D I G I TA L
PRO LOGIC
STANDBY
/ON
CENTER
SUB
WOOFER
SPEAKERS
A
B
PROCESSOR
BASS
DIRECT
EXTENSION
A/B/C/D/E
PRESET/
TUNING
STEREO
PROGRAM
PRESET
/TUNING
FM/AM MEMORY
R
PHONES
L
A
L
SORROUND
6CH
DISCRETE
L
R
MIXED 2CH
AUDIO OUT
2
Y
L
AUDIO
VIDEO AUX
R
OPTICAL
–
+
–
+
You can connect this unit to any component that has analog
2 channel input terminals using the RCA audio cable
supplied with this unit.
1
PR
B
VIDEO
B AUDIO OUT (MIXED 2CH) terminals
CENTER
SUB
WOOFER
S VIDEO
This unit incorporates multi-channel decoder and can be
connected to your AV amplifier as an external decoder. With
this connection, you can enjoy a 96 kHz or more sampling
frequency multi-channel audio track on a DVD-Audio disc,
etc. even if the disc is copyright-protected. However, your
AV amplifier’s digital sound processing features have no
effect on the audio signals output from these terminals.
Required Audio settings (See p.25, 26 and 29):
• Speaker settings ^ Multi-channel*
• Digital Audio Output ^ Off
* Also make output mode, delay time and speaker
balance adjustments.
MAIN
R
TREBLE
MAN'L/AUTO FM AUTO/MAN'L MONO
EDIT
EFFECT
SILENT
L
BASS
TUNING
MODE
TUNER
DSP
6CH INPUT
R
Notes on digital recording
You can record the source from this unit through your AV
center (AV amplifier, etc.) or connecting these terminals
directly to your CD recorder, etc.
• With CD, wait for the total play time to appear before
turning on your recording unit’s synchro recording
feature. The beginning may be cut off if you turn it while
‘READING’ is displayed.
• With DVDs, recording may be interrupted when a new
chapter begins. If it persists, use analog recording by
making analog connections. These phenomena occur
because DVD player must first determine the audio
format and sampling frequency before switching digital
output.
PB
COMPONENT VIDEO OUT
(480p/480i)
S VIDEO
VIDEO
VIDEO OUT
COAXIAL
OPTICAL
PCM/
DTS
DIGITAL
8
103-C920(E)07-10
8
12/24/1, 11:55 AM
CONNECTIONS
Video connections
MAIN
R
L
SORROUND
CENTER
SUB
WOOFER
A
B
6CH
DISCRETE
C
L
1
PR
R
MIXED 2CH
AUDIO OUT
2
Y
S VIDEO
PB
COMPONENT VIDEO OUT
(480p/480i)
VIDEO
COAXIAL
OPTICAL
PCM/
DTS
DIGITAL
VIDEO OUT
Note
V
Y
PBCB
A Component Video terminal
PRCR
COMPONENT
VIDEO IN
S VIDEO
INPUT
INPUT
VOLUME
INPUT M0DE
NATURAL SOUND AV RECEIVER
6CH INPUT
D I G I TA L
PRO LOGIC
STANDBY
/ON
SPEAKERS
A
B
PROCESSOR
BASS
DIRECT
EXTENSION
A/B/C/D/E
PRESET/
TUNING
STEREO
PROGRAM
PRESET
/TUNING
FM/AM MEMORY
BASS
TUNING
MODE
TREBLE
TUNER
MAN'L/AUTO FM AUTO/MAN'L MONO
EDIT
PHONES
S VIDEO
VIDEO
L
AUDIO
R
OPTICAL
DSP
EFFECT
SILENT
VIDEO AUX
VIDEO
–
+
–
+
S VIDEO
OUT
VIDEO
OUT
COMPONENT
VIDEO IN
S VIDEO
IN
VIDEO
IN
Note
Video monitor
PLAYBACK
COMPONENT
VIDEO OUT
AV amplifier
Component video connection achieves high fidelity in
reproducing colors (better performance than S-video
connection), separating video signal into luminance (Y,
terminal color-coded as green), and color difference (PB,
blue/PR, red). Use commercially available coaxial cables.
Amplifier (and Video monitor) with component input is
required. Observe the color of each terminal when connecting. If your amplifier does not have component output
terminals, connecting this unit’s component output directly
to your video monitor’s component input can reproduce
better video image.
PREPARATION
S
• Do not connect this unit to a video monitor through a video
cassette recorder. If you do so, the picture may not be played back
properly due to the copyright protection technology incorporated
in this unit.
INTRODUCTIOIN
If your AV amplifier has video terminals, connect your
amplifier (and then to your video monitor) so that you can
use one video monitor for several different video sources
(LD, VCR etc.) by simply switching the input source
selector of your amplifier.
This unit has three types of video output terminals. Use one
of them in accordance with the input terminals of the
equipment to be connected.
(U.S.A. model)
• Do not connect this unit’s COMPONENT VIDEO OUT terminals
to component video input terminals special for HD (HighDefinition) TV.
B S-Video terminal
C Composite Video terminal (1, 2)
APPENDIX
Use RCA video cable supplied with this unit
when connecting this unit to a video monitor.
VIDEO 1, 2 terminals of VIDEO OUT output the same
signal. You can connect one to your amplifier’s input using
supplied RCA cable, and the other to another amplifier or a
video monitor.
SETUP MENU
S (separate) video connection achieves a clearer picture than
composite video connection by separating color and
luminance when transmitting signals. Use commercially
available S-video cable. Amplifier (and Video monitor) with
S-video input is required.
English
9
103-C920(E)07-10
9
12/24/1, 11:55 AM
CONNECTIONS
Remote control in/out terminals
MAIN
R
L
SORROUND
CENTER
SUB
WOOFER
6CH
DISCRETE
L
1
PR
OUT
R
MIXED 2CH
AUDIO OUT
IN
2
Y
PB
COMPONENT VIDEO OUT
(480p/480i)
S VIDEO
VIDEO
VIDEO OUT
COAXIAL
OPTICAL
PCM/
DTS
DIGITAL
REMOTE
CONTROL
These terminals are used for custom installation system that
transmits remote control signals via cables. Connect this
unit’s REMOTE CONTROL IN to the Remote control
output of the control unit of your system.
By connecting this unit’s REMOTE CONTROL OUT to
another piece of equipment’s Remote control input terminal,
you can also operate that equipment with the system remote
control.
Power supply cord
After completing all connections, connect the AC power
cord to an AC power outlet.
OUT
IN
REMOTE
CONTROL
To AC outlet
10
103-C920(E)07-10
10
12/24/1, 11:55 AM
PLAYBACK
BASIC OPERATION
To play a disc properly, you need to adjust the formats of audio and video signals output from this unit in accordance with the
equipment connected to this unit. See p.25 to 27.
CAUTION
• If your AV amplifier does not incorporate DTS decoder and you have connected this unit and the amplifier through
digital terminals, please make sure that the ‘DTS Digital Surround’ at ‘Audio’ SETUP MENU is set to PCM (factorysetting). Otherwise, unprocessed digital signals will be output and its noise could damage your ears and your speakers.
1
2
POWER
GROUP
VIDEO OFF PROGRESSIVE ON
PLAYXCHANGE
PROGRESSIVE
VIDEO OFF
DISC SKIP
4 (PLAY)
■ Preparation
Select DVD as the input source on your AV amplifier.
1
2
Press POWER to turn the power on.
3
Load discs.
Use the disc guides (numbered, 1 to 5) to align the
discs correctly.
4
Press w (PLAY).
The disc tray closes and playback starts. This unit plays
all discs on the tray in sequence.
Label side
upward
Press v (or OPEN/CLOSE) to open the disc
tray.
y
PLAYBACK
3
PREPARATIONS
Playing a disc
INTRODUCTIOIN
Before starting play
• If necessary, select a desired disc using DISC SKIP or one of the
DISC 1, 2, 3, 4 or 5 buttons.
• When a menu screen appears DVD-A DVD-V VCD :
See ‘Using a Disc’s Menu’ in p.14.
Disc tray
OPEN/CLOSE
PLAY MODE REPEAT
SUBTITLE
A–B
AUDIO
2
MARKER
ANGLE
TOP MENU
MENU
ENTER
ON SCREEN
RETURN
STOP
PLAY
SKIP
• When this unit finishes playing a DVD, this unit stops playback or
shows the menu screen and does not start playing the next disc.
• This unit cannot play a CD-R or CD-RW disc unless the disc has
been finalized. Please make sure to finalize the disc on the CD
recorder before playing it on this unit.
SETUP MENU
Notes
4 (PLAY)
PAUSE
SLOW/SEARCH
2
3
5
6
7
9
0
10
VIDEO OFF
GROUP
PAGE
DISC1
DISC2
DISC4
DISC5
4
APPENDIX
1
8
CANCEL
PROGRESSIVE
SET UP
DISC3
DISC SKIP
English
11
104-C920(E)11-16
11
12/24/1, 11:55 AM
BASIC OPERATION
POWER
DISC SKIP
PLAYXCHANGE
■ To stop playback
Press a (STOP).
Resume function
POWER
GROUP
VIDEO OFF PROGRESSIVE ON
PLAYXCHANGE
PROGRESSIVE
VIDEO OFF
DISC SKIP
PLAY
Notes
OPEN/CLOSE
PLAY MODE REPEAT
SUBTITLE
A–B
AUDIO
• Selecting another disc cancels the resume function.
• This function may not work with some discs or on some part of
a disc.
MARKER
ANGLE
TOP MENU
MENU
ENTER
ON SCREEN
STOP
RETURN
STOP
PLAY
SKIP
PLAY
PAUSE
SLOW/SEARCH
1
2
3
5
6
7
9
0
10
VIDEO OFF
GROUP
PAGE
DISC1
DISC2
DISC4
DISC5
4
8
CANCEL
Chapter review function [DVD-V]
This function plays the first few seconds of each chapter
from the beginning of the title up to the memorized point so
that you can review previous chapters.
Press w (PLAY) while the message for chapter review is
displayed on the screen.
Notes
PROGRESSIVE
SET UP
STOP
This unit memorizes where a (STOP) was pressed as long
as this unit is turned on (W indicator flashes on the display).
When you press w (PLAY) in this status, playback resumes
from where it was stopped.
To clear the memory, press a (STOP) once more so that the
W indicator goes off.
DISC3
DISC SKIP
DISC 1—5
DISC SKIP
• This function may not work with some DVDs.
• Canceling resume function will also clear the chapter review
function.
■ To select a specific disc
Press DISC 1, 2, 3, 4 or 5.
y
• You can select another disc by pressing DISC SKIP.
Playxchange
By pressing PLAYXCHANGE, you can open the disc tray
and load or replace discs without interrupting play.
However, never load a disc on the guide half hidden
inside the unit because the disc currently being played is
to be placed there.
■ After operation
When this unit is not in use, remove discs and press
POWER.
12
104-C920(E)11-16
12
12/24/1, 11:55 AM
BASIC OPERATION
Multi-speed play
PLAY PAUSE
■ To select a specific track VCD CD
GROUP
VIDEO OFF PROGRESSIVE ON
PLAYXCHANGE
PROGRESSIVE
DISC SKIP
VIDEO OFF
SKIP / SLOW/SEARCH
AUDIO
MARKER
ANGLE
TOP MENU
MENU
Cursor buttons
(q, w)
ENTER
ON SCREEN
RETURN
STOP
PLAY
SKIP
SKIP
PLAY
PAUSE
SLOW/SEARCH
2
3
4
5
6
7
8
9
0
10
VIDEO OFF
GROUP
PAGE
DISC1
DISC2
DISC4
DISC5
Numeric buttons
CANCEL
PROGRESSIVE
SET UP
DISC3
DISC SKIP
• To increase the speed, press SLOW/SEARCH on the remote
control repeatedly or keep pressing r/y, t/e on the front
panel.
■ Pause
Press d (PAUSE).
• To resume play, press w (PLAY).
PLAYBACK
1
PAUSE
SLOW/SEARCH
y
PREPARATIONS
SUBTITLE
A–B
■ Search
Press SLOW/SEARCH r (or e) on the remote control
to search forward (or backward).
or
Press and hold r/y (or t/e) on the front panel to
search forward (or backward).
OPEN/CLOSE
PLAY MODE REPEAT
Example (to select track 17):
1 Press >=10.
2 Press 1.
3 Press 7.
INTRODUCTIOIN
Enter a desired track number using numeric buttons.
To select a two-digit number, press >
=10 and then enter the
upper figure and the last figure successively.
■ Frame advance/reverse
DVD-A DVD-V VCD
1 Press d (PAUSE) during playback.
2 Press the cursor buttons (q, w).
Each press advances (or reverses) still picture by one frame.
• To return to normal play, press w (PLAY).
SETUP MENU
Note
• With Video CD, you cannot move backward.
■ Skip
Press SKIP y (or t) on the remote control to skip
forward (or backward).
or
Press r/y (or t/e) on the front panel to skip
forward (or backward).
Press once for each chapter (track) to be skipped.
control.
or
Press and hold r/y (or t/e) on the front panel.
• To return to normal play, press w (PLAY).
y
• When playing a VCD with playback control, skip operation may
not function as described above.
• To increase the speed, press SLOW/SEARCH on the remote
control repeatedly or keep pressing r/y, t/e on the front
panel.
APPENDIX
Note
■ Slow DVD-A DVD-V VCD
1 Press d (PAUSE) during playback.
2 Press SLOW/SEARCH r (or e) on the remote
Note
• With Video CD, you cannot move backward.
English
13
104-C920(E)11-16
13
12/24/1, 11:55 AM
BASIC OPERATION
Using a disc’s menu
Discs may contain multiple audio tracks, subtitles, index and bonus materials such as movie trailers and cast information, etc.
And many of them have menu screens that enable you to control these features. This section gives you general instruction
about how to operate these screens. However, the operation methods may differ depending on the disc.
1
Press TOP MENU or MENU during playback to
show menu screen.
• With some discs, menu screen appears automatically
when you start playback.
2
Press the cursor buttons ( , , q, w) to select
the desired item.
3
Press ENTER to go to the screen of the
selected item or to start playing the selected
item.
• You may also use the numeric buttons to operate
steps 2 and 3.
OPEN/CLOSE
PLAY MODE REPEAT
SUBTITLE
A–B
MARKER
AUDIO
ANGLE
TOP MENU
TOP MENU
Cursor buttons,
ENTER
MENU
MENU
ENTER
ON SCREEN
RETURN
RETURN
STOP
PLAY
PAUSE
a (STOP)
SKIP
w (PLAY)
SLOW/SEARCH
t, y (SKIP)
1
2
3
5
6
7
4
Numeric buttons
8
CANCEL
9
0
VIDEO OFF
GROUP
PAGE
10
DISC1
DISC2
DISC4
DISC5
■ Video CD’s playback control
PROGRESSIVE
SET UP
If ‘PBC’ appears on the display while playing a Video CD,
this unit is in playback control mode and a menu screen
appears on the video monitor. You can operate menu screens
using the following buttons.
DISC3
DISC SKIP
Numeric buttons: Press to select the desired item.
RETURN: Press to go back to the previous screen
w (PLAY): Press to play the selected item
y: Press to show the next screen
t: Press to show the previous screen
a (STOP): Press while a menu screen appears on the video
monitor to cancel the playback control.
Note
• Playback control is automatically canceled during program play
or random-sequence play.
Enhancing video quality [U.S.A. and Canada models only]
PROGRESSIVE ON
GROUP
PROGRESSIVE
DISC SKIP
VIDEO OFF
PROGRESSIVE indicator
PROGRESSIVE
PROGRESSIVE
DISC1
DISC2
DISC4
DISC5
SET UP
DISC3
DISC SKIP
VIDEO OFF PROGRESSIVE ON
PLAYXCHANGE
This unit’s component video outputs are capable of output
progressive signals. You can enjoy even higher quality
picture if you have connected this unit to a monitor that can
receive progressive signals.
Press PROGRESSIVE (or PROGRESSIVE ON on the front
panel).
The PROGRESSIVE indicator lights up.
• To cancel this feature, press PROGRESSIVE again.
Note
• If the screen shifts off center when using progressive output, see
‘Adjusting the screen position’ on p.24.
• When playing 4:3 aspect software with a 16:9 aspect wide-screen
monitor using progressive output, the picture may appear
horizontally stretched to fill the screen. In that case, change the
aspect to the correct one at your monitor. If the monitor cannot
change the aspect, it is recommended to turn the progressive
feature off.
14
104-C920(E)11-16
14
12/24/1, 11:55 AM
BASIC OPERATION
DVD-Audio features
■ To play a track on a specific group
OPEN/CLOSE
PLAY MODE REPEAT
SUBTITLE
A–B
AUDIO
2
Press the cursor buttons ( , ) to select a
group number and press ENTER.
MENU
ENTER
ON SCREEN
RETURN
STOP
PLAY
1
2
3
5
6
7
9
0
10
VIDEO OFF
GROUP
PAGE
DISC1
DISC2
4
DISC4
DISC5
Numeric buttons
8
CANCEL
PAGE
■ To play a bonus group
PROGRESSIVE
SET UP
Press the cursor buttons ( , ) to select a track
number and press ENTER.
The selected track starts to play.
• You can also use the numeric buttons to select a group
and a track.
3
PAUSE
SLOW/SEARCH
DISC3
Some discs contain bonus groups. If it requires 4 digit
password, consult the disc jacket, etc. and enter the
password using the numeric buttons and then press ENTER.
DISC SKIP
PREPARATIONS
SKIP
GROUP
Press GROUP.
The group and track icons appears on the video
monitor.
ANGLE
TOP MENU
Cursor buttons,
ENTER
1
MARKER
INTRODUCTIOIN
This section explains about some features particular to DVD-Audio. Though most of the content selection can be controlled
using a disc’s menu like DVD-Video, there exists in a DVD-Audio the unit called ‘group’ that is something equivalent to
DVD-Video’s ‘title’.
■ To change pages
You can enjoy even higher quality sound by turning off the
video signal output.
VIDEO OFF
GROUP
VIDEO OFF PROGRESSIVE ON
PROGRESSIVE
DISC SKIP
VIDEO OFF
PLAYXCHANGE
Press VIDEO OFF.
Picture is turned off and the VIDEO OFF indicator lights
up.
• To cancel this feature, press VIDEO OFF again.
• While you pause or search play, this unit outputs the
video signal and the picture is shown on the video
monitor.
APPENDIX
VIDEO OFF indicator
CANCEL
VIDEO OFF
9
0
VIDEO OFF
GROUP
PAGE
10
DISC1
DISC2
DISC4
DISC5
PROGRESSIVE
SET UP
SETUP MENU
Enhancing audio quality
PLAYBACK
DVD-Audio may contain some information screens called
‘pages’ that show photo galleries, artist biographies and
lyrics, etc. When it appears, you can move to another page
by pressing PAGE (page number appears on the display
when you change pages.).
• Some discs may navigate you to press the cursor buttons
(q, w) to turn pages.
DISC3
DISC SKIP
English
15
104-C920(E)11-16
15
12/24/1, 11:55 AM
BASIC OPERATION
Switching audio tracks, subtitles and angles
Some discs are encoded with several audio tracks, multilingual subtitles or multiple camera angles. Refer to disc jacket
etc. to see which feature is supported.
OPEN/CLOSE
AUDIO
PLAY MODE REPEAT
SUBTITLE
A–B
AUDIO
MARKER
ANGLE
SUBTITLE
ANGLE
TOP MENU
MENU
, ,w
ENTER
ON SCREEN
■ Audio tracks
Different audio track languages and/or formats can be
selected if available on the disc.
RETURN
RETURN
STOP
PLAY
SKIP
PAUSE
SLOW/SEARCH
1
2
3
5
6
7
4
Numeric buttons
8
CANCEL
9
0
VIDEO OFF
GROUP
PAGE
10
DISC1
DISC2
DISC4
DISC5
PROGRESSIVE
SET UP
DISC3
Press AUDIO during play.
The Audio track icon appears on the video monitor.
• Pressing the button repeatedly toggles through all audio
tracks recorded on the disc. You can also use the cursor
buttons ( , ) or the numeric buttons to change tracks.
• You can also use the button to turn the vocals on and off
on karaoke discs. See the instruction of each disc.
DISC SKIP
Notes
• Play restarts from the beginning of the current track if you change
audio track while playing DVD-Audio, other than video section.
• With DVD-Audio, track number 2 may appear even if the disc
does not support multiple audio tracks.
■ Subtitles
AUDIO
DVD-Audio
DVD-Video
1
LPCM
1 192k24b 2ch
Digital
1 ENG 3/2.1 ch
Press SUBTITLE during play.
The subtitle icon appears on the video monitor.
• Pressing the button repeatedly toggles through all
subtitles recorded on the disc. You can also use the cursor
buttons ( , ) or the numeric buttons to change subtitles.
To turn on/off the subtitles:
Selected audio track number
– can be switched to 2 even if the
audio track does not recorded on
the disc.
1
2
3
Currently playing audio track
number
Press SUBTITLE.
Press the cursor button (w).
Press the cursor buttons ( , ) to select ON
and OFF.
Notes
SUBTITLE
ON
2 FRA
ON
1 ENG
• ‘- -’ appears if the disc does not have a subtitle.
• Subtitles may not change immediately after you press the button.
■ Angles
I love you
Je t’aime
Some DVDs have scenes encoded with multiple camera
angles so that different viewpoint can be selected during
playback. ANGLE lights up on the front panel display while
a scene encoded with multiple angles is being played.
Subtitle language number being played
ANGLE
2
1
Press ANGLE while ANGLE on the front panel display
lights up.
The angle icon appears on the video monitor.
• Pressing the button repeatedly toggles through all angles
recorded on the disc. You can also use the cursor buttons
( , ) or the numeric buttons to change angles.
■ To turn the icon off
Press RETURN.
Note
Angle number being played
• With some discs, you cannot change audio tracks, subtitles or
angles in the way described above. In that case, go to the disc
menu and change them.
16
104-C920(E)11-16
16
12/24/1, 11:55 AM
SPECIFYING THE PLAY SEQUENCE
This function allows you to play your desired chapter, track
or disc repeatedly.
■
OPEN/CLOSE
PLAY MODE REPEAT
REPEAT
SUBTITLE
A–B
AUDIO
TOP MENU
MARKER
ANGLE
MENU
ENTER
ON SCREEN
STOP
RETURN
PLAY
a
REP
PAUSE
SLOW/SEARCH
e
CHAPTER REPEAT
b
REP
TITLE
REP
TRACK REPEAT
f
TITLE REPEAT
REP1 DISC
DISC REPEAT
or
c
REP 5DISC
REP
d
GROUP REPEAT
g
REPEAT OFF
REP 5DISC
ALL REPEAT
‘REP’ goes off.
h
REPEAT OFF
‘REP’ goes off.
DVD-A VCD CD
e TRACK REPEAT: The current track is played repeatedly.
f DISC REPEAT (Video CD, CD): The current disc is
played repeatedly.
or
GROUP REPEAT (DVD Audio): The current group is
played repeatedly.
g ALL REPEAT: All the discs loaded on the tray are
played repeatedly.
h REPEAT OFF: Repeat play mode is canceled.
Program repeat
i
PROG
REP
Random-sequence repeat
l
1 STEP REPEAT
j
PROG
REP
TRACK REPEAT
m
ALL REPEAT
k
PROG
RND REP
RND REP
ALL REPEAT
n
RND
REPEAT OFF
If REPEAT is pressed during programmed play (p.19),
repeat mode changes as follows.
i 1 STEP REPEAT: Repeating the track being played
j ALL REPEAT: Repeating all the programmed tracks
k REPEAT OFF: Canceling repeat mode (go back to
normal program play)
■ Random-sequence repeat
DVD-A VCD CD
If REPEAT is pressed during random play (p.18), repeat
mode changes as follows.
l TRACK REPEAT: Repeating the track being played
m ALL REPEAT: Playing all the tracks repeatedly, each
time in different random-sequence.
n REPEAT OFF: Canceling repeat mode (go back to
normal random play)
APPENDIX
REPEAT OFF
■ Program repeat DVD-A VCD CD
SETUP MENU
Pressing REPEAT while playback is stopped switches ‘ALL
REPEAT’ to ‘REPEAT OFF’ or vice versa.
PLAYBACK
ALL REPEAT
DVD-V
a CHAPTER REPEAT: The current chapter is played
repeatedly.
b TITLE REPEAT: The current title is played repeatedly.
c ALL REPEAT: All the discs loaded on the tray are
played repeatedly.
d REPEAT OFF: Repeat play mode is canceled.
PREPARATIONS
SKIP
Press REPEAT during playback.
Each time this button is pressed, repeat mode changes
as follows. The name of the selected repeat mode
scrolls once on the multi-information display and the
corresponding indicators light up.
INTRODUCTIOIN
Repeat play
Notes
English
• Repeat play may not work properly with some DVD-Video.
• Repeat play does not work with an interactive DVD-Video or
during menu play of a VCD with playback control.
17
105-C920(E)17-20
17
12/24/1, 11:55 AM
SPECIFYING THE PLAY SEQUENCE
Repeat A-B
This function allows you to specify two points and play
between them repeatedly.
OPEN/CLOSE
PLAY MODE REPEAT
SUBTITLE
A–B
AUDIO
1
Press A-B during play at the point where you
want to start A-B repeat.
‘REP’ and ‘A-’ light up and ‘B’ flashes on the display.
2
Press A-B at the point where you want to end
A-B repeat.
‘REP’ and ‘A-B’ appear on the display and repeat play
of the section between point A and B starts.
MARKER
A–B
ANGLE
TOP MENU
MENU
ENTER
ON SCREEN
RETURN
STOP
PLAY
SKIP
PAUSE
SLOW/SEARCH
■ To cancel A-B repeat
1
REP
A–B
Press A-B repeatedly until A-B indicator on the display goes
off.
Notes
Lights up
2
REP
Flashes
• This function may not available with some DVD-Video.
• This function works only within a title (DVD-Video) or a track
(VCD, CD).
A–B
Lights up
Random play [DVD-A] [VCD] [CD]
When you select this mode, this unit plays all tracks on all
discs loaded on the disc tray in random sequence.
OPEN/CLOSE
PLAY MODE REPEAT
A–B
MARKER
PLAY MODE
SUBTITLE
AUDIO
TOP MENU
ANGLE
Press a (STOP) to stop play.
3
Press w (PLAY) to start random play.
MENU
ENTER
ON SCREEN
STOP
1
2
Press PLAY MODE repeatedly until ‘RND’ lights
up on the display.
RETURN
PLAY
PAUSE
a (STOP)
SKIP
SLOW/SEARCH
w (PLAY)
■ To cancel random mode
1 Press a (STOP) twice during play.
Random play is suspended.
2 Press PLAY MODE once.
RND
Lights up
RND indicator goes off.
If you press w (PLAY) successively, normal playback starts
from the beginning of the disc having been played before
canceling random mode.
Opening the disc tray also cancels this mode.
Note
When this unit is in random mode while a Video CD (ver.2.0) is
loaded, playback control is canceled during random play.
18
105-C920(E)17-20
18
12/24/1, 11:55 AM
SPECIFYING THE PLAY SEQUENCE
Programmed play [DVD-A] [VCD] [CD]
OPEN/CLOSE
PLAY MODE REPEAT
PLAY MODE
SUBTITLE
A–B
AUDIO
MARKER
ANGLE
TOP MENU
MENU
RETURN
Cursor buttons
(q, w)
PAUSE
w (PLAY)
ENTER
ON SCREEN
STOP
a (STOP)
PLAY
SKIP
SLOW/SEARCH
1
2
3
4
5
6
7
8
PAGE
DISC1
DISC2
DISC4
DISC5
CANCEL
10
PROGRESSIVE
SET UP
1 2 3 4 5
GROUP
1 2 3 4 5
GROUP
DVD
AUDIO
PROG
TRACK
P:O1
You can program up to 32 tracks to be played in desired
order. ‘FULL’ appears on the display when the number of
tracks exceeds 32.
5
Press w (PLAY) to start play.
■ To cancel the programmed tracks
1 Press the cursor buttons (q, w) to select the track you
PROG
TRACK
1-O2
P:O3
Track No.
Program No.
want to cancel.
2 Press CANCEL.
Note
SETUP MENU
Group No.
Press numeric buttons to select the track.
• Repeat steps 3 and 4 to program other tracks in your
desired order.
• See p.13 about how to enter the track with numeric
buttons.
• To program a whole disc (or all tracks of the
selected group of DVD-Audio), press ENTER
(‘ALL’ appears on the display).
• Pressing a (STOP) cancels all tracks programmed
so far.
DISC 1—5
Selected disc
4
4
DISC SKIP
_-__
DVD
AUDIO
Press DISC 1—5 to select the disc.
• When programming DVD-Audio, press GROUP to
specify the group.
PLAYBACK
2
DISC3
3
Press PLAY MODE repeatedly until PROG
lights up on the display.
The display shows the step information.
PREPARATIONS
0
GROUP
Press a (STOP) to stop play.
Numeric buttons
CANCEL
9
VIDEO OFF
1
2
INTRODUCTIOIN
You can enjoy listening to your favorite tracks selected from
one or more discs in any desired order by programming
tracks.
When you program a track of a Video CD (ver.2.0), playback
control is canceled during programmed play.
■ To exit programming mode
Press PLAY MODE twice or open the disc tray.
APPENDIX
English
19
105-C920(E)17-20
19
12/24/1, 11:55 AM
SPECIFYING THE PLAY SEQUENCE
Bookmarks
This feature allows you to mark up to 5 points so that you
can quickly return to those points later.
OPEN/CLOSE
PLAY MODE REPEAT
SUBTITLE
A–B
AUDIO
MARKER
TOP MENU
MENU
ENTER
ON SCREEN
RETURN
STOP
PLAY
SKIP
1
Press MARKER.
The marker icon appears on the screen.
2
Press the cursor buttons (q, w) to select one
of five asterisks.
The selected asterisk is highlighted.
3
Press ENTER.
The selected asterisk turns to be the bookmark number.
MARKER
ANGLE
Cursor buttons (q, w),
ENTER
PAUSE
SLOW/SEARCH
1
2
3
5
6
7
9
0
10
VIDEO OFF
GROUP
PAGE
DISC1
DISC2
DISC4
DISC5
4
■ To recall a bookmarked scene
8
CANCEL
CANCEL
Press the cursor buttons (q, w) to select a bookmark
number and press ENTER.
PROGRESSIVE
SET UP
DISC3
DISC SKIP
■ To clear a bookmark
Press the cursor buttons (q, w) to select a bookmark
number and press CANCEL.
Note
When you open the tray or turn this unit off, all bookmarks are
cleared.
✱✱✱✱✱
1 ✱✱✱✱
Bookmark number
20
105-C920(E)17-20
20
12/24/1, 11:55 AM
ON-SCREEN MENU
You can control various items using on-screen menu bar.
INTRODUCTIOIN
Operating menu bar
a T C
2
Digital
1 ENG 3/2.1 ch
1 : 46 : 50
2
ON
1 ENG
1
1
b
Press ON SCREEN.
Each time ON SCREEN is pressed, the menu bar
changes as below.
1 2 3 ✱✱
AB
a Icons for disc menu
c
b Icons for player menu
+100
–100
Off
• Icons for player menu
d
e
2
1 2 3 ✱✱
AB
IPB
BRIGHT
SP OFF
OFF
f
PLAYBACK
OFF
Press the cursor buttons (q, w) to select the
item you wish to adjust.
The selected item is highlighted.
• Icons for player menu has 4 different menu bars as
below. To switch the menu bar, select the leftmost
icon and then press the cursor buttons ( , ).
d Play menu
e Display menu
g
N
PREPARATIONS
c Shuttle screen
Off
f Audio menu
g Video menu
OPEN/CLOSE
PLAY MODE REPEAT
A–B
AUDIO
3
MARKER
ANGLE
TOP MENU
MENU
Cursor buttons,
ENTER
ENTER
ON SCREEN
RETURN
ON SCREEN
RETURN
STOP
PLAY
SKIP
PAUSE
SLOW/SEARCH
1
2
3
5
6
7
4
Numeric buttons
8
Press the cursor buttons ( , ) to change
setting.
• With some items, you need to press ENTER or w
(PLAY) to determine the setting.
• You can also use the numeric buttons when entering
numbers to select a chapter, etc.
• You can also use RETURN to turn the screen off.
and around the icon means that the item can be
•
changed using the cursor buttons ( , ).
T
CANCEL
9
0
VIDEO OFF
GROUP
PAGE
DISC1
DISC2
DISC4
DISC5
SETUP MENU
SUBTITLE
10
2
PROGRESSIVE
APPENDIX
SET UP
DISC3
DISC SKIP
Note
• Some items cannot be accessed when the play is stopped.
■ To change the menu bar position
When the menu bar does not appear properly, you can adjust
its position.
1
2
Select the rightmost icon ( ).
English
Press the cursor buttons ( , ) to move the
menu bar.
21
106-C920(E)21-24
21
12/24/1, 11:56 AM
ON-SCREEN MENU
Icons for disc menu
example: DVD-Video
T
C
2
2
Digital
1 ENG 3/2.1 ch
1 : 46 : 50
ON
1 ENG
1
DVD-V
Title number
DVD-A VCD CD
Track number
T
2
2
ON
DVD-A
Group number
G
2
1
A Language
ENG:
FRA:
DEU:
ITA:
ESP:
NLD:
DVD-A VCD CD
Changing the time display
Track elapsed time
Track remaining time
L R
Digital
1 ENG 3/2.1 ch
12
3
Vocal
1 ✱
OFF
ON
1 ENG
2 1
English
French
German
Italian
Spanish
Dutch
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
R
Example:
3/2 .1ch
DVD-A DVD-V
1 Audio track number
2 Audio track Language:
See A for language abbreviations.
3 Audio signal type: See B for details.
1: Subwoofer
(not displayed if there is no subwoofer signal)
0: Rear channel not available on the disc
1: Rear channel (monaural)
2: Rear channels (left/right)
DVD-A DVD-V
Karaoke vocal on/off
(Karaoke DVD only)
Solo: OFF or ON
Duet: OFF, V1+V2, V1 or V2
1: Main channel (monaural)
2: Main channels (left/right)
3: Main channels (left/right) + Center
Notes
DVD-A DVD-V
1 Subtitle on/off
2 Subtitle language
• Display may differ in accordance with the disc’s specification.
• Time remaining on the disc does not appears during program or
random-sequence play.
Shuttle screen
Slow-motion play
: Backward DVD-A DVD-V
Pause
Slow-motion play
: Forward DVD-A DVD-V VCD
+100
–100
Search
: Backward
Play
Search
: Forward
Note
• Slow-motion only works on the video parts of DVD-Audio.
22
106-C920(E)21-24
22
CHI: Chinese
KOR: Korean
MAL: Malay
VIE: Vietnamese
THA: Thai
*:
Others
B Signal type/data
LPCM/PPCM/qDigital/DTS/MPEG: Signal type
k (kHz):
Sampling frequency
b (bit):
Number of bits
ch (channel): Number of channels
Disc remaining time
VCD
Audio mode
LR
L
DVD-A
Page number
Page
DVD-A DVD-V
Time index (hour:minute:second)
You can start play from the desired point
by specifying the elapsed time.
1 : 46 : 50
VCD
Playback control
Indicates whether playback control is on
or off.
PBC
DVD-V
Chapter number
C
DVD-A DVD-V
Angle number
1
12/24/1, 11:56 AM
ON-SCREEN MENU
Icons for player menu
■ Play mode menu
■ Audio menu
example: DVD-Video
example: DVD-Video
1 2 3 ✱✱
SP OFF
A-B repeat (^ p.18)
[ENTER] (start point) ^ [ENTER] (finish point)
To cancel
[ENTER]
AB
SP OFF
To recall a bookmark
[q, w] ^ [ENTER]
To erase a bookmark
[q, w] ^ [CANCEL]
■ Display menu
example: DVD-Video
IPB
OFF
OFF
BRIGHT
BRIGHT
DVD-V
IPB display
Displays the picture type (I/P/B)* of a still
picture (when paused).
ON
OFF
Display dimmer
Changes the brightness of the front panel display
BRIGHT
DIM
AUTO*
DVD-V
Cinema dialog
Increases the volume level of the dialog part
(center channel).
Notes
• Audio output from this unit is 2-channels when the virtual
surround is turned on.
• Turn off the sound effect of the AV amplifier, etc. connected to
this unit when turning on the virtual surround.
• Turn the virtual surround off if it causes sound distortion.
SETUP MENU
* The display dims and any indicators that were
on turn off during play. The display brightens
and the indicators light up temporarily when
you perform an operation.
PLAYBACK
IPB
OFF
DVD-V VCD
Virtual surround mode
Allows you to enjoy surround-like effect without
surround speakers when playing a disc encoded
with multi-channel audio track (may not effective
with some discs). You can also enjoy the feature
connecting headphones to your AV amplifier.
SP (with main speakers):
Dolby Digital, DTS, MPEG, LPCM multichannel source
HP (with headphones):
Dolby Digital, MPEG, LPCM multi-channel
source
SP/HP OFF: Virtual surround-off
SP/HP 1: Virtual surround-on
SP/HP 2: Virtual surround-enhanced
PREPARATIONS
Bookmarks (^ p.20)
You can mark up to 5 points.
To mark a point
[q, w] ^ [ENTER] (at the desired point)
1 2 3 ✱✱
OFF
INTRODUCTIOIN
AB
* ‘I’ (intra coded picture) indicates that the picture is the original
one and has greater amount of information than that of ‘P’ or ‘B’.
‘P’ (predictive coded picture) is made from ‘I’ and ‘B’
(bidirectionally-predictive coded picture) is to fill in the space
between ‘I’ and ‘P’. It is recommended to use ‘I’ picture for
adjusting video image.
APPENDIX
English
23
106-C920(E)21-24
23
12/24/1, 11:56 AM
ON-SCREEN MENU
■ Video menu
When PROGRESSIVE is on (U.S.A. and Canada models)
N
N
DVD-A DVD-V VCD
Digital picture mode
To select the picture mode: [ , ]
N: Normal
C: Cinema image (suited for movie viewing)
U: User mode
To change the user mode
1 Select User mode and press w.
2 Press (q, w) to select the item you wish to
change.
3 Press ( , ) to change the setting.
The following items are also displayed when
you select ‘U’.
U
0
0
0
0
N
N
Auto
Auto
DVD-A DVD-V VCD
Digital picture mode
To select the picture mode: [ , ]
N: Normal
C: Cinema image (suited for movie viewing)
Transfer MODE
Selects the method of conversion for progressive
output to suit the type of material being played.
Auto (normal): for viewing film material
Video: for video material
Contrast (–7 to +7)
Adjusts the contrast between light and dark
part of the picture.
Brightness (0 to +15)
Adjusts the brightness of the picture.
Sharpness (–6 to +6) (Australia model)
Adjusts the horizontal resolution of the
picture.
Color (–7 to +7)
Adjusts the shade of the picture’s color.
■ Adjusting the screen position (when using progressive output)
(U.S.A. and Canada models)
With some video monitors, the screen may shift off center with progressive signals output from this unit. To adjust the
position, follow the below method.
1
2
3
4
Press d (PAUSE) to pause play.
Follow the steps 1 and 2 on ‘Operating menu bar’ on p.21 to show the video menu.
Press w to select the rightmost icon ( ).
Adjust the position.
To move to the left, press the numeric button 1.
To move to the right, press the numeric button 3.
To set the screen back to the original position, press the numeric button 2.
Example:
Press
right.
3
to move to the
• You can check whether the picture is in the center or not by switching to normal output (press PROGRESSIVE so the
indicator turns off).
5 Save the adjusted position.
First press a (STOP) and then press SET UP to show setup menu. Then press SET UP once again (or RETURN) and now
the position is saved. Even if you skip this procedure, the position is saved until you turn the power off.
24
106-C920(E)21-24
24
12/25/1, 2:46 PM
SETUP MENU
SETUP MENU
Operating the setup menu
This section shows common procedures (some items require
additional steps). Use the remote control to operate the
setup menu.
OPEN/CLOSE
PLAY MODE REPEAT
SUBTITLE
A–B
AUDIO
MARKER
TOP MENU
Press SET UP while playback is stopped.
The menu screen appears on the video monitor.
2
Press the cursor buttons (q, w) to select a
menu group.
There are five menu groups. The screen shows the
items that belong to the menu group of the selected tab.
MENU
ENTER
ON SCREEN
RETURN
RETURN
STOP
PLAY
SKIP
PAUSE
SLOW/SEARCH
1
2
3
5
6
7
Disc menu 1
4
8
Video menu 2
CANCEL
9
0
VIDEO OFF
GROUP
PAGE
10
DISC1
DISC2
Audio menu 3
PROGRESSIVE
SET UP
SET UP
DISC3
DISC SKIP
DISC4
Display menu 4
DISC5
PLAYBACK
Others menu 5
1
SET UP
3
Press the cursor buttons ( , ) to select the
desired item and press ENTER.
4
Press the cursor buttons ( , ) to change the
setting and press ENTER.
Disc
■ To go back to the previous screen
English
Press RETURN.
■ To get out from the setup menu mode
M
2
Press SET UP.
Video
TV Aspect
4:3 Pan&Scan
SETUP MENU
Audio
SET UP
PREPARATIONS
Cursor buttons,
ENTER
1
ANGLE
INTRODUCTIOIN
With the setup menu, you can change this unit’s system defaults to suit your preference and your home theater system. Some
items must be adjusted to play a disc properly.
TV Type
A t
ti
3
SET UP
Audio
Speaker Setting
Multi-channel
APPENDIX
4
SET UP
Display
M
L
E
li h
5
SET UP
Others
English
25
107-C920(E)25-29
25
12/24/1, 11:56 AM
SETUP MENU
Summary of settings
The below chart shows the menu groups and each items. In the ‘Options’ column, the factory settings are underlined.
Menu
groups
Disc
^ See
p.27 and
28 for
details.
Items
Audio DVD-A DVD-V
Select the preferred audio track language.
Subtitle DVD-A DVD-V
Select the preferred subtitle language.
Menus DVD-A DVD-V
Select the preferred disc menu language.
Ratings DVD-V
Set a ratings level to limit DVD-Video play. See p.28 for details.
Video
Audio
TV Aspect
If you connect to a 4:3 conventional-type monitor, select ‘4:3
Pan&Scan’ (left and right sides trimmed when playing 16:9 software) or
‘4:3 Letterbox’ (black areas appear at the top and bottom when playing
16:9 software). Select ‘16:9’ if you connect to a widescreen monitor.
Still Mode
Specify the type of picture shown when paused. First select ‘Automatic’.
If a still picture jitters, select ‘Field’. If details don’t appear clearly
enough, select ‘Frame’.
Black Level Control (U.S.A. and Canada models)
Change the black level of the picture. Select ‘Lighter’ when you connect
to the monitor using VIDEO or S VIDEO terminal. Select ‘Darker’
when using COMPONENT terminals.
NTSC Disc Output (Australia model)
Select video signal format (PAL 60 or NTSC) to be output when playing
NTSC disc.
Speaker Setting
Adjust the settings to suit your audio system and your listening
environment when you connect to your AV amplifier using 6CH
DISCRETE terminals. See p.29 for details.
Options
(U.S.A. and Canada models)
English
French
Spanish
Original
Other****
(Australia model)
English
French
German
Italian
Spanish
Original
Other****
(U.S.A. and Canada models)
Automatic English
French
Spanish
Other****
(Australia model)
Automatic English
French
German
Italian
Spanish
Other****
(U.S.A. and Canada models)
English
French
Spanish
Other****
(Australia model)
English
French
German
Italian
Spanish
Other****
Setting ratings (When level 8 is selected)
8 No Limit
1 to 7
0 Lock All
Changing ratings
(When level 0—7 is selected)
Unlock Player
Change Level
Change Password
Temporary Unlock
4:3 Pan&Scan 4:3 Letterbox
16:9
Automatic
Field
Lighter
Darker
PAL 60
NTSC
Frame
Multi-channel:
Select this when connected to multi-channel
system. There are three sub-items as below.
• Speaker presence and size
• Delay time
• Channel balance
2-channel:
Select this when connected to 2-channel system.
PCM Down Conversion DVD-A DVD-V
Select how to output the high sampling-frequency audio signals on a
disc that is not copyright-protected. See p.28 for details.
No
Yes
26
107-C920(E)25-29
26
12/24/1, 11:56 AM
SETUP MENU
Menu
groups
Audio
PCM
Bitstream
PCM
Bitstream
Off
On
On
Off
(U.S.A. and Canada models)
English
Français
Español
(Australia model)
English
Français
Deutsch
Español
On
Off
Off
On
Off
On
Italiano
PLAYBACK
On-Screen Messages
Select whether to show on-screen messages or not.
DVD-Video Mode
Decide whether to play a DVD Audio disc with DVD Video contents as
a DVD Video disc or not.
Demo
A demonstration of the unit’s on-screen displays starts when you select
‘On’. The demonstration stops when you press a button and the setting
reverts to ‘Off’.
PCM
PREPARATIONS
Others
Options
Bitstream
INTRODUCTIOIN
Display
Items
Dolby Digital DVD-A DVD-V
Decide the signal type that output from this unit’s digital outputs. Select
‘Bitstream’ when connected device has Dolby Digital decoder. Select
‘PCM’ when not.
DTS Digital Surround DVD-A DVD-V
Decide the signal type that output from this unit’s digital outputs. Select
‘Bitstream’ when connected device has DTS decoder. Select ‘PCM’
when not.
MPEG DVD-A DVD-V (Australia model)
Decide the signal type that output from this unit’s digital outputs. Select
‘Bitstream’ when connected device has MPEG decoder. Select ‘PCM’
when not.
D. Range Compression DVD-A DVD-V
(Dolby Digital only)
Change the dynamic range for late night viewing. Select ‘On’ to make it
easier to hear dialog etc. even at low volume level.
Audio during Search DVD-A DVD-V VCD
Select whether to have sound during search. Select ‘Off’ if sound
distorted when searching with Dolby Digital or DTS material. With
DVD-Audio, the sound may be heard even if you select ‘Off’.
Menu Language
Select the preferred language for on-screen messages and setup menu.
If you set to ‘Original’ at Audio, Subtitle or Menus, the original language of each disc is selected. If you set to ‘Other’, you
need to select a four-digit number of the desired language from the list below and enter with numeric buttons.
6890: Bhutani
6976: Greek
6978: English
6979: Esperanto
6983: Spanish
6984: Estonian
6985: Basque
7065: Persian
7073: Finnish
7074: Fiji
7079: Faroese
7082: French
7089: Frisian
7165: Irish
7168: Scots Gaelic
7176: Galician
7178: Guarani
7185: Gujarati
7265: Hausa
7273: Hindi
7282: Croatian
7285: Hungarian
7289: Armenian
7365: Interlingua
7378: Indonesian
7383: Icelandic
7384: Italian
7387: Hebrew
7465: Japanese
7473: Yiddish
7487: Javanese
7565: Georgian
7575: Kazakh
7576: Greenlandic
7577: Cambodian
7578: Kannada
7579: Korean
7583: Kashmiri
7585: Kurdish
7589: Kirghiz
7665: Latin
7678: Lingala
7679: Laotian
7684: Lithuanian
7686: Latvian, Lettish
7771: Malagasy
7773: Maori
7775: Macedonian
7776: Malayalam
7778: Mongolian
7779: Moldavian
7782: Marathi
7783: Malay
7784: Maltese
7789: Burmese
7865: Nauru
7869: Nepali
7876: Dutch
7879: Norwegian
7982: Oriya
8065: Punjabi
8076: Polish
8083: Pashto, Pushto
8084: Portuguese
8185: Quechua
8277: RhaetoRomance
8279: Romanian
8285: Russian
8365: Sanskrit
8368: Sindhi
8372: Serbo-Croatian
8373: Singhalese
8375: Slovak
8376: Slovenian
8377: Samoan
8378: Shona
8379: Somali
8381: Albanian
8382: Serbian
8385: Sundanese
8386: Swedish
8387: Swahili
8465: Tamil
8469: Telugu
8471: Tajik
8472: Thai
8473: Tigrinya
8475: Turkmen
8476: Tagalog
8479: Tonga
8482: Turkish
8484: Tatar
8487: Twi
8575: Ukrainian
8582: Urdu
8590: Uzbek
8673: Vietnamese
8679: Volapük
8779: Wolof
8872: Xhosa
8979: Yoruba
9072: Chinese
9085: Zulu
APPENDIX
Language code list
6565: Afar
6566: Abkhazian
6570: Afrikaans
6577: Ameharic
6582: Arabic
6583: Assamese
6588: Aymara
6590: Azerbaijani
6665: Bashkir
6669: Byelorussian
6671: Bulgarian
6672: Bihari
6678: Bengali; Bangla
6679: Tibetan
6682: Breton
6765: Catalan
6779: Corsican
6783: Czech
6789: Welsh
6865: Danish
6869: German
27
27
12/24/1, 11:56 AM
English
Note
Selecting audio, subtitle or disc menu language is a disc-dependent matter. The language selected at the setup menu is not effective if a disc
does not have it.
107-C920(E)25-29
SETUP MENU
Language selection and language code list
SETUP MENU
Ratings [DVD-V]
Depending on software capability, you can prevent discs or scenes with objectionable material from being played according to your desired rating. You can select
the level and lock it by designating password.
OPEN/CLOSE
PLAY MODE REPEAT
SUBTITLE
A–B
MARKER
AUDIO
ANGLE
TOP MENU
MENU
Level 8
All DVDs can be played.
Level 7 to 1
Level of restriction becomes severer as the
number gets smaller.
Level 0
All DVDs cannot be played.
ENTER
ON SCREEN
ENTER
RETURN
STOP
PLAY
SKIP
PAUSE
■ Setting method
SLOW/SEARCH
1
2
3
5
6
7
4
Numeric buttons
1
Follow steps 1 to 4 of ‘Operating the Setup Menu’ (see p.25) to
select the desired level.
2
Enter 4-digit number with numeric buttons and press ENTER.
• Press CANCEL if you want to re-enter other number.
The screen that confirms your password appears. Do not forget your
password.
3
Press ENTER.
8
CANCEL
9
0
VIDEO OFF
GROUP
CANCEL
10
PAGE
SET UP
Ratings
Enter a 4-digit password,
then press ENTER.
SELECT
Password
✱✱✱✱
ENTER RETURN
SET UP
■ To change settings
Ratings
Unlock Player
Change Password
Change Level
Temporary Unlock
SELECT
When you select a disc that exceeds the rating you have set, a message appears on
the monitor. If you want to play the disc, select ‘Yes’ and enter your password.
The unit unlocks the setting. It will be locked again by selecting another disc,
opening the disc tray or turning the unit off.
You must enter your designated password when you unlock the player (level is set
to 8), change the level, change the password, or unlock the playback of currently
selected disc.
Select ‘Ratings’ and then follow each procedure appears on the screen.
ENTER RETURN
PCM down conversion [DVD-A] [DVD-V]
Decide whether to output high-quality digital signals (sampling frequency of 88.2 kHz and 96 kHz) or not, in accordance
with the capability of the connected component.
• If your AV amplifier etc. is capable of handling high-rate sampling frequency digital signals, select ‘No’.
• If not, select ‘Yes’ so that digital output signals are converted to 48 kHz or 44.1 kHz.
Note
• If a disc is copy-right protected or has a sampling frequency of 176.4 kHz or more, signals are automatically converted to either 48 kHz or
44.1 kHz.
Speaker settings
If you wish to enjoy multi-channel sound reproduction connecting this unit’s 6CH
DISCRETE output terminals to your amplifier etc., you need to select ‘Multichannel’ and make following adjustments. Also, set your amplifier’s input mode to
analog.
OPEN/CLOSE
PLAY MODE REPEAT
SUBTITLE
A–B
AUDIO
TOP MENU
MARKER
ANGLE
MENU
ENTER
ON SCREEN
STOP
RETURN
PLAY
Cursor buttons,
ENTER
PAUSE
28
107-C920(E)25-29
28
12/24/1, 11:56 AM
SETUP MENU
1
Main (L)
1
Center
213
Main (R)
1
■ Output mode 1
Change the settings of each speaker in accordance with your speaker system.
Exit
Press the cursor buttons (q, w, , ) to select a speaker and press
ENTER.
2
Press the cursor buttons ( , ) to select the setting and press
ENTER.
SETUP
L
ms
0
R
dB
0
C
Exit
Test
dB
0
SW
dB
0
RS
SELECT
LS
ENTER
RETURN
dB
0
ms
0
Test signal
Rear Subwoofer
(L) 1 (L) 3 2 (R) 3 (R) 1
3 1
B
C
LS
LS
Example: Left surround (rear) speaker
A when the speaker is not used
B when using a large speaker capable of low-frequency (under 100 Hz)
output.
C when using a small speaker that is not capable of low-frequency output.
The L and R (left and right main speakers) settings are automatically decided by
the SW (subwoofer) setting.
■ Delay time 2
To obtain the maximum effect of Dolby Digital 5.1 channel source, all speakers
should be located at the same distance from the listening position. However, in
many cases they are not the center speaker is placed in line with the main
speakers, etc. You can virtually increase the distance of the center and rear
speakers by adjusting the delay time.
2
L
Press the cursor buttons (q, w, , ) to select a ‘ms’ box and
press ENTER.
2
Press the cursor buttons ( , ) to adjust the delay time and press
ENTER.
■ Speaker balance 3
You can adjust the output level of each effect speakers (center, surround L/R)
using the test tone.
RS
1
• Center speaker
Setting
Approx. 50 cm (1 1/2 feet)
1.3 ms
Approx. 100 cm (3 feet)
2.6 ms
Approx. 150 cm (5 feet)
3.9 ms
Approx. 200 cm (6 feet)
5.3 ms
• Rear speakers
Difference
L
2
C
R
RS
LS
Listening to the test tone, press the cursor buttons ( , ) to adjust
the volume of effect speakers and press ENTER.
The value in the ‘dB’ box changes.
SETUP MENU
Difference
Press the cursor buttons (q, w, , ) to select ‘Test’ and press
ENTER.
The test tone is one speaker at a time in below order, starting with the left
main speaker.
PLAYBACK
SW
LS
1
R
C
PREPARATIONS
A
INTRODUCTIOIN
1
Note
Setting
The subwoofer cannot output the test tone. Play something and return to this screen to adjust
the output level of the subwoofer.
5.3 ms
Approx. 400 cm (12 feet)
10.6 ms
■ To exit the speaker setting mode
Approx. 600 cm (18 feet)
15.9 ms
Press the cursor buttons (q, w, , ) to select ‘EXIT’ and press ENTER.
APPENDIX
Approx. 200 cm (6 feet)
Notes
• These adjustments are not effective on digital signal output from this unit. Make
adjustments at your amplifier.
• These adjustments may not be effective when the disc’s original sound design is protected.
PPCM indicator lights up or DMIX indicator turns off in that case.
English
29
107-C920(E)25-29
29
12/26/1, 4:39 PM
APPENDIX
TROUBLESHOOTING
If this unit fails to operate normally, check the following points to determine whether the fault can be corrected, or if the fault
is not listed in the PROBLEM column, disconnect the power code and contact your authorized YAMAHA dealer or service
center.
PROBLEM
This unit fails to turn
on when the POWER
switch is pressed.
This unit does not work
normally.
Playback does not
start.
POSSIBLE CAUSE
Picture appears
incorrectly.
Firmly connect the power cord.
—
This unit is affected by an external shock
(lightning, excessive static electricity,
incorrect operation, etc.)
The disc is damaged.
Turn the power off and disconnect the power
cord. After about 30 seconds have passed,
connect the power and operate the unit again.
Check the disc carefully; replace it if
necessary.
Wait 1 to 2 hours after switching the unit on
before trying to play a disc.
Reload the disc with the label side facing up.
Clean the disc.
Connect this unit and other equipment
properly.
Set the input to the right position.
—
Press VIDEO OFF to cancel the feature.
15
—
Select the right position. However, it may be
difficult to adjust many DVD-Videos’
widescreen format to fit perfectly in your 4:3
video monitor.
Connect this unit’s video outputs directly to
your video monitor or to your AV amplifier
and then to a video monitor.
Turn off the PROGRESSIVE feature.
26
Turn off the PROGRESSIVE feature.
14
The disc has been loaded upside down.
The disc is dirty.
Incorrect video connections.
Input selection at your AV amplifier or your
video monitor is not the one connected to this
unit.
VIDEO OFF is functioning.
(U.S.A. and Canada models)
If you play PAL system DVD-Audio, ‘This
disc is PAL system. The output is sound only’
may appear on the monitor. Picture is not
available because the disc’s video signal
system is different.
Incorrect ‘TV aspect’ setting.
A VCR is connected between this unit and
the video monitor.
Play is delayed, or
starts at the wrong
place.
This unit does not
recognize discs (‘No
disc’ appears on the
display, or the display
shows the status when
no disc is loaded).
No sound.
(U.S.A. and Canada models)
PROGRESSIVE is turned on even though the
connected monitor cannot receive the
progressive signals.
(U.S.A. and Canada models)
Due to the editing method or material used on
a DVD, ghosting may occur with progressive
output.
The disc may be scratched or damaged.
—
—
—
3
9
—
9
14
—
The disc(s) is not placed properly.
Place the disc(s) correctly along the guide(s).
—
Incorrect cable connections.
Connect the cables properly. If the problem
persists, the cables may be defective.
Set the amplifier controls to the correct input
selection.
8
Incorrect amplifier operation.
30
108-C920(E)30-32
Refer to
Page
The power cord is not connected or the plug
is not completely inserted.
There is moisture on the laser pickup.
No picture.
WHAT TO DO
30
12/24/1, 11:56 AM
—
TROUBLESHOOTING
No sound when playing
a disc encoded with
DTS.
No sound from some
speakers.
Incorrect setting(s) at the audio section of
‘Setup menu’ on this unit or at ‘input mode’
on your amplifier.
With some DVD-Audio, output channels are
specified by the disc.
Incorrect ‘Speaker settings’. (when 6CH
DISCRETE outputs are connected to your
amplifier)
Audio output form this unit becomes two
channels when the virtual surround feature is
on.
Virtual surround effect is emphasized too
much.
This unit is being subjected to vibrations or
impacts.
The disc is dirty.
Incorrect cable connections.
Sound distorted.
Sound ‘skips’.
Sound ‘hums’.
Noise from a nearby
tuner.
Noise from inside of
the unit.
The remote control
does not work.
26, 27
—
Change the settings to suit your speaker
system.
29
Turn virtual surround mode off.
23
Turn virtual surround mode off.
23
Relocate the unit.
—
3
8
The tuner is too close to the unit.
Clean the disc.
Securely connect the audio cables. If the
problem persists, the cables may be defective.
Place the tuner and the unit farther apart.
—
The disc maybe warped.
Replace the disc.
—
The batteries are weak.
Direct sunlight or lighting (from an inverter
type of fluorescent lamp, etc.) is striking the
remote control sensor of this unit.
The disc does not contain the language you
have selected.
Replace all batteries with new ones.
Relocate the unit.
7
7
The disc does not have subtitles.
Subtitle is turned off.
—
Show subtitles by pressing SUBTITLE or
using on-screen menu.
The disc or the scene being played does not
support multi-angle.
—
16
—
Clear all settings on the setup menu. See
‘Returning setup menu to the factory-setting’
below this table.
—
■ Returning setup menu to the factory-setting
While playback is stopped, press and hold d (PAUSE), and then DISC SKIP and PLAYXCHANGE on the front panel until
‘Initialized’ appears on the video monitor. All settings on the setup menu return to the factory settings.
SETUP MENU
Angle cannot be
changed.
The password for
setting parental level
has been forgotten.
Select proper settings.
Refer to
Page
PLAYBACK
Audio track and/or
subtitle language is not
the selected one.
No subtitles.
WHAT TO DO
PREPARATIONS
POSSIBLE CAUSE
INTRODUCTIOIN
PROBLEM
APPENDIX
English
31
108-C920(E)30-32
31
12/24/1, 11:56 AM
SPECIFICATIONS
■ Audio section
■ General
Frequency response
DVD (48 kHz sampling): ......................... 2 Hz to 22 kHz
DVD (96 kHz sampling): ......................... 2 Hz to 44 kHz
DVD Audio (192 kHz sampling): ............. 2 Hz to 88 kHz
Power supply:
[U.S.A. and Canada models] ....................... 120 V, 60 Hz
[Australia model] ......................................... 240 V, 50 Hz
CD, Video CD: .............................................. 2 Hz to 20 kHz
Harmonic distortion + noise (1 kHz): ....................... 0.002 %
S/N ratio: ................................................. 115 dB (Weighted)
Dynamic range
DVD (48 kHz, 24 bit): .......................................... 103 dB
CD, Video CD: ....................................................... 99 dB
Output level (1 kHz, 0 dB): ...................................... 2±0.3 V
■ Video section
VIDEO output: ............................................... 1 Vp-p (75 Ω)
S VIDEO output
Y output: .................................................... 1 Vp-p (75 Ω)
C output:
NTSC .................................................. 0.286 Vp-p (75 Ω)
PAL ......................................................... 0.3 Vp-p (75 Ω)
Power consumption: ..................................................... 21 W
Laser pickup:
Wave length .......................................................... 665 nm
Laser power ...................................................... CLASS II
Laser output .......................... Max. 1.0 mW (Continuous)
Output value determined by 21 CFR CHAPTER1,
SUBCHAPTER J
Dimensions: ..................... 435 (W) × 116 (H) × 404 (D) mm
(17-1/8˝ × 4-1/2˝ × 15-7/8˝)
Weight: ........................................................................ 6.2 kg
(13 lbs 10 oz)
Accessories: ............................. RCA pin cable (audio/video)
Remote control
Batteries (AA, R6, UM-3)
COMPONENT VIDEO output
Y output: .................................................... 1 Vp-p (75 Ω)
PB output: ................................................ 0.7 Vp-p (75 Ω)
PR output: ................................................ 0.7 Vp-p (75 Ω)
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
YAMAHA
ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
Printed
MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
108-C920(E)30-32
32
12/26/1, 3:54 PM
in Malaysia
V816670
Download PDF

advertising