Samsung UN85S9VF -ZA TV คู่มือผู้ใช้
Below you will find brief information for UN85S9VF UN85S9VF-ZA. This Samsung TV boasts Smart Hub for web browsing, app downloads, and social media access. It features 3D viewing capabilities and Anynet+ for controlling compatible Samsung devices with a single remote. The included Smart Touch Control offers voice recognition and a virtual remote. Enjoy seamless media playback from external devices and explore a wealth of entertainment options.
Advertisement
Advertisement
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country Customer Care Center Web Site
CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca (English) www.samsung.com/ca_fr (French)
Address
Samsung Electronics Canada Inc., Customer Service 55
Standish Court Mississauga, Ontario L5R 4B2 Canada
U.S.A
1-800-SAMSUNG (726-7864) www.samsung.com/us Samsung Electronics America, Inc. 85 Challenger Road
Ridgefield Park, NJ 07660
© 2013 Samsung Electronics Co., Ltd. All rights reserved.
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 1
BN68-05628A-00
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at www.samsung.com/register
Model _____________ Serial No. _____________
✎ If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.
2013-10-29 �� 1:30:36
Important Safety Instructions
Warning! Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER ALL SERVICING TO QUALIFIED
PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol indicates that important literature concerning operation and maintenance has been included with this product.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
− Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
− Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
− Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the
DC adaptor corresponds to the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
• Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).
− Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.
• Be sure to contact an authorized service center for information if you intend to install your TV in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such in an airport, a train station, etc. Failing to do so may lead to serious damage of your TV.
• Use only a properly grounded plug and wall outlet.
− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.
• Do not allow children to hang onto the product.
• Store the accessories (battery, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.
• Do not drop or apply any shock to the product. If the product is damaged, disconnect the power cord and contact a service center.
• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the TV or erase the printing on the product.
• Do not expose this apparatus to dripping or splashing.
• Do not dispose of batteries in fire.
• Do not short-circuit, disassemble or overheat the batteries.
• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN
FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
• This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.
English - 2
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 2 2013-10-29 �� 1:30:37
English - 3
English - 2
Contents
Basic Features
5
Using the Smart Touch Control
6 Connecting to the TV
6 Inserting the Batteries
(AAA X 2)
7 Low Battery Power Warning
7
Using the touch pad
8 Changing Channels by
Entering Numbers
8 Show Status and
Notification Banner
8 Recommended
8 History
9 Searching
9 Using the Virtual
Remote Control
10
Connecting the TV to One Connect
10 Ferrite Core for One connect cable
10
Turning on the TV
11
External Device Connections
11 TV - Side
12 One Connect - Front
13
Switching Between
Video Sources
14
Universal Remote Setup
14 Add the External Device
Viewing the e-Manual
15
Viewing the e-Manual
15 Scrolling a Page
15 Using the Top Icons
15 Returning to the Home Page
15 Searching the Index
15 Searching Pages
Network
Configuration
16
Connecting to a Network
16 Network Connection
- Wireless
16 Wireless Network
Precautions
16 Closing the e-Manual
16 Jumping to a Menu Item
16 Updating the e-Manual
17 Network Security Protocols
17 Network Connection - Wired
3D Basics
18
3D Active Glasses
18 Features
19 Pairing 3D Active Glasses
20 Pairing for the first time
Troubleshooting and
Other Information
21
What is Remote Support?
22
Troubleshooting
23
Mounting the TV on the Wall
24
Eco Sensor and
Screen Brightness
25
Maintenance
25
TV Upgrade using One
Connect
(sold separately)
Specifications
26
Specifications
26
Licenses
Guides
27
Warranty Information
29
Regulatory Compliance
Statements
(For 3D Active Glasses)
30
SAMSUNG BRAND
PRODUCTS
30 LIMITED WARRANTY TO
ORIGINAL PURCHASER
English - 3
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 3 2013-10-29 �� 1:30:37
• Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and specifications may change without notice.
• You can download a copy of the e-Manual from Samsung's website and read it on your computer or print it out.
Features of your new TV
• 3D: This new feature enables you to view 3D content.
• SMART HUB:
This TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, you can surf the web, download applications, and stay in touch with family and friends through social networking services.
In addition, you can view or play photo, video, and music files stored on external storage devices.
Press the ™ button to launch Smart Hub. Choose a service using the icons displayed in the top part of the screen.
Smart Hub services and functionality include:
Social: Watch the latest YouTube videos and your and your friends' video posts on Facebook and Twitter.
Apps: Samsung Apps offers an extensive collection of free and paid news, sports, weather, and gaming content you can directly download to and enjoy on your TV.
On TV: Check a listing of programs that are currently airing or are scheduled to air.
Movies & TV Shows: Purchase and watch movies and series without a separate external device.
Photos, Videos & Music: Play back photo, video, and music files from an external storage device.
• Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.
• e-Manual: Provides a detailed, on-screen user's manual built into your TV.
• SMART Interaction: Use the Smart Touch Control’s VOICE button for voice recognition.
• Device Manager: Use the TV features with a USB or Bluetooth keyboard and mouse.
• MHL & Screen Mirroring: Displays mobile device screens on your TV using a wired or wireless connection.
English - 4
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 4 2013-10-29 �� 1:30:38
English - 5
English - 4
Basic Features
Using the Smart Touch Control
Use Voice Recognition function with the microphone embedded in remote control.
✎ The Voice Recognition function can be affected by unclear pronunciation, voice level, or surrounding noise.
Turns the TV on and off.
TV
Displays and selects the available video sources.
MIC
STB
SOURCE
MUTE : Cuts off the sound
VOL
✎
VOICE temporarily.
To do so, use the
Sound Share function the audio device is connected to the TV’s
HDMI (ARC) port.
Adjust the volume of a connected audio device.
✎ To do so, use the Sound Share function or make sure that the audio device is connected to the TV’s HDMI (ARC) port.
LIGHT
RETURN
EXIT
LIGHT : Turn on the backlight for the buttons.
The backlight lasts for only a few seconds. Turns the remote control light on or off. When on, the pressed. (Using the remote control with this button set to On will reduce the battery usage time.)
DVR : This button is only available when the Smart
Touch Control is configured to function as a universal remote control to control a set-top box.
Run DVR (Digital Video Recording) in set-top box.
MENU : Opens the OSD.
3D : Turns the 3D function on or off.
See the e-Manual chapter,
TV Viewing > 3D TV.
Returns to the previous menu.
TV
MIC
SOURCE
STB
VOL
VOICE
MORE
CH
LIGHT DVR MENU 3D
RETURN
EXIT SMART HUB
GUIDE
English - 5
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 5
Turn on and off the satellite or cable set-top box connected to the TV.
For this, the Smart Touch Control must be configured as a universal remote control. See the e-Manual chapter, Controlling the TV > Universal
Remote Setup.
VOICE : Take your voice command and enter a text using your voice.
Changes channels.
Displays a virtual remote panel on the screen. See the e-Manual chapter, Controlling the TV > Using the Virtual Remote Control.
Touch Pad
• Drag on the touch pad to move the focus on the screen.
• Press the touch pad to run, activate, or select the highlighted item.
• Press and hold the touch pad to display the
Channel List.
Displays the EPG
(Electronic Program Guide).
Brings up Smart Hub applications.
See the e-Manual chapter, SMART TV Features
> Smart Hub.
✎ To exit an application that is running easily, press the ™ button.
2013-10-29 �� 1:30:39
Connecting to the TV
In order to operate the TV using a Smart Touch Control, you must first pair it to the TV via Bluetooth. However, the Smart Touch Control is only available for the paired Samsung TV.
✎ We recommend to use the Smart Touch Control in less than 20ft(6m).
A usable distance may differ depending on the wireless environmental conditions.
1. To turn on the TV, point the Smart Touch Control at the remote control receiver of the TV and press the P button. The remote control receiver's location may vary depending on the model.
2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the Smart Touch Control automatically.
Inserting the Batteries (AAA X 2)
1 2 3
1. Slightly lift the battery cover using a plastic card. Next, pull on the cover’s notch with a fingernail to remove the cover completely.
✎ Check the location of the battery cover groove. The groove's location may vary depending on the type of Smart Touch Control is provided with the product.
2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
3. Align the battery cover with the back of the remote control, and then press down along the edges until it is completely attached to the remote control.
<Attempting to connect and completion icons>
English - 6
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 6 2013-10-29 �� 1:30:39
English - 7
English - 6
Reconnecting the Smart Touch Control
If the Smart Touch Control stops operating or works abnormally, replace the battery as this may be caused by insufficient battery power. If the problem persists, press the PAIRING button on the Smart Touch Control to restore pairing with the TV. The PAIRING button cannot be accessed without removing the Smart Touch Control's battery cover. Within a distance between 1ft to
13.1ft(30cm to 4m), point the Smart Touch Control to the TV receiver and press the PAIRING button. When pairing is complete, the pairing image displays at the bottom left of the TV screen.
Using the touch pad
Use the touch pad to implement various commands. Navigate to Tutorial
(System > Device Manager > Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.
Dragging Pressing
<The Smart Touch Control's pairing button>
Low Battery Power Warning
If the battery becomes low while using the Smart Touch Control, the following alarm window appears at the bottom of the left screen. If the alarm window pops up, replace the batteries of the Smart Touch Control. Use alkaline batteries for longer usage.
Drag on the touch pad to move the focus, pointer, or highlight in the direction the finger is dragging.
Press the touch pad to select the item highlighted or in focus. When watching TV, press and hold the touch pad for 2 seconds displays the channel list. On some apps, press and hold the touch pad for 2 seconds displays a list of functions available for the app.
<Low battery alarm window>
English - 7
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 7 2013-10-29 �� 1:30:40
Changing Channels by Entering Numbers
While watching TV, tap on the protruding line on the left or right edge of the touchpad to bring up the numerical input window on the screen. Use your finger to enter the number for the channel you want to watch. The recognized number is displayed on the screen and the TV switches to the corresponding channel. However, the number you have entered may not be recognized properly by the TV. Refer to the guide below to ensure that your numerical entries are recognized accurately.
Numerical Input Guide
Refer to the diagrams below when entering numerical values. The TV may not recognize your entries if you do not follow the sequences shown below.
Show Status and Notification Banner
Press the MORE button on the Smart Touch Control and then select STATUS on the virtual remote panel that appears on the screen. The status and notification banner appears at the top of the screen. For more information about using the status and notification banner, refer to e-Manual > SMART
TV Features > Status and Notification.
Recommended
Press the RECOMM. / SEARCH button and then select the Recommended from the list on bottom of the screen. This shows the current/scheduled program and application recommendations.
Select a program that is currently airing to jump to the corresponding channel or a program that is scheduled to air to set up a Schedule Viewing setting.
Refer to e-Manual > SMART TV Features > On TV for more information.
Select an application to launch. Samsung Apps will launch if the selected application is not installed on the TV. Refer to e-Manual > SMART TV
Features > Apps > Samsung Apps for more information.
History
Press the RECOMM. / SEARCH button and then select History from the list displayed at the bottom of the screen. This displays an interactive list of recently accessed channels, media content and applications.
English - 8
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 8 2013-10-29 �� 1:30:41
English - 9
English - 8
Searching
Press the RECOMM. / SEARCH button on the Smart Touch Control. The list appears at the bottom of the screen. Press the RECOMM. / SEARCH button again. The keypad will appear on the screen. Enter search criteria to search not only many apps and their contents on the TV but also the Web.
Refer to e-Manual > SMART TV Features > Searching for more information.
Using the Virtual Remote Control
Press the MORE button to display the virtual remote panel on the TV screen.
The virtual remote panel consists of the number panel, a playback control panel, and the quick access panel. Use the touch pad to highlight and select icons, numbers, and buttons on the panels.
✎ The displayed virtual remote panel on the TV screen may differ depending on the country.
Channel History
No Channel numbers have been saved.
E F G
TOOLS 3D STATUS MENU
Netflix INFO Amazon
TOOLS
PIP
P.Size
Ext. Speaker
P.Mode
MTS
CC
Web Brow...
B e-Manual
Changing the Virtual Remote Panel
You can change which virtual remote panel is displayed on the TV screen. To shift between panels, move the focus highlight beyond the left or right edge of the displayed panel.
Use left/right scroll function on the touch pad to change the panel easily.
Change a position of the Virtual Remote Panel
Press the MORE button on the Smart Touch Control. The virtual remote panel appears on the screen. Press and hold the touch pad for one second. Users can change a position of the virtual remote panel of the screen.
Using the Number Panel
Use the number panel to enter numbers on a keypad screen or webpage or to change the channel while watching TV. Changing the channel using the number pad leaves a record, allowing you to easily return to previous channels.
Using the Playback Control Panel
Use the playback control panel to pause, rewind, fast forward, skip to the next file, select a function with the a , b , { , } buttons, and much more while enjoying media content.
Using the Quick Access Panel
Use the buttons on the quick access panel to bring up the TV's INFO, TOOLS or e-Manual screens. Note that the buttons that appear may vary depending on the operating mode of the Smart Touch Control (with the TV only, as a universal remote, etc.).
English - 9
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 9 2013-10-29 �� 1:30:41
Turning on the TV
Turn on the TV using the P button on the Smart Touch Control or TV panel.
✎ The first time you turn on your TV, it will immediately start the initial setup.
✎ The product color and shape may vary depending on the model.
Connecting the TV to One Connect
One Connect must be connected to the TV via the One Connect cable before connecting an external device. The One Connect cable has two different ends,
Connect the TV to One Connect referring to the diagram.
One Connect
<One Connect-end Connector> <TV-end Connector>
TV
Power button
Ferrite Core for One connect cable
The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.
English - 10
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 10 2013-10-29 �� 1:30:43
English - 11
English - 10
<One Connect-end Connector> <TV-end Connector>
[ The connectors at both ends of the One Connect cable are different from each other in shape. When connecting the One
Connect cable to the TV, make sure that the right connector is plugged into the TV. Otherwise, it may cause product failure.
External Device Connections
TV - Side
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 11
English - 11
2013-10-29 �� 1:30:43
One Connect - Front
Connect Audio divice
✎ Be sure to connect an audio device to the UN85S9VF model for audio output.
To make it possible to adjust the connected audio device’s volume, use the Sound Share function or make sure that the audio device is connected to the TV’s
HDMI (ARC) port.
English - 12
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 12 2013-10-29 �� 1:30:45
English - 13
English - 12
Switching Between Video Sources
Press the SOURCE button to switch between devices connected to the TV.
For example, to switch to a game console connected to the second HDMI connector, press the SOURCE button. From the Source list, select HDMI2.
The connector names may vary depending on the product.
Select Tools at the upper-right corner of the source screen to access the following functions.
• Edit Name: Lets you associate a device name to an input source.
You can select the following device names in the Edit Name option:
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver /
Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray /
HD DVD / DMA
To associate a device name to an input source, follow these steps:
1. Select Tools in the upper right corner of the source screen.
2. Select Edit Name.
3. Find the input source you want in the Source list (HDMI1, HDMI2,
Component, etc.).
4. Select the blank field next to the input.
5. In the device name list that appears, select the name of the device attached to the input.
When you view the Source list, the device name and the input port will be displayed together.
− If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI cable, select PC from the device name list.
− If you have connected a PC to the HDMI IN 2 (DVI) port with an HDMI to DVI cable, select DVI PC from the device name list.
− If you connected an AV device to the HDMI IN 2 (DVI) port with an
HDMI to DVI cable, select DVI Devices from the device name list.
• Information: View detailed information about the connected devices.
• Anynet+ (HDMI-CEC): A list appears showing Anynet+ compatible ones of external devices connected to the TV.
• Remove USB: Remove the USB device from the list safely. This function is only available when the USB device selected.
Universal Remote Setup: Use to configure universal remote control settings.
Using the universal remote control, users can control external devices connected to the TV, such as a set-top box, Blu-ray player, and AV receiver.
English - 13
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 13 2013-10-29 �� 1:30:45
Universal Remote Setup
This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home theaters, and other third-party external devices connected to the TV using the TV's remote control.
Keep a distance of 2 inches at least between the IR Extender and the external device, as the illustration shows. Face the IR Extender toward the external device’s remote control signal receiver. Note that it should be no obstacle between IR Extender and external device. The presence of an obstacle will interfere with the transmission of the remote control signal.
Add the External Device
1. Turn on the external device you wish to set up universal remote function for and then press the SOURCE to bring up the Source screen.
2. Select Universal Remote Setup from the top of the screen. This initiates the universal remote setup process.
3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the remote control by entering the model number manually.
2 inches
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 14
English - 14
2013-10-29 �� 1:30:46
English - 15
English - 14
Viewing the e-Manual
Viewing the e-Manual
This TV has a built-in e-Manual that contains information about your TV's key features and instructions for using them. To view the e-Manual, use one of the following methods:
• Open the Support menu and choose e-Manual (Troubleshooting).
• Press the MORE button on the Smart Touch Control to display the virtual remote panel on the TV screen. Flick the touch pad until the quick access panel appears, select the e-Manual icon, and then press the touch pad.
✎ In the e-Manual, words in blue refer to screen menu options and words in light blue refer to remote control buttons.
✎ A printable version of this guide is also available at www.samsung.com/ support.
Scrolling a Page
To scroll a page, use of one of the following methods:
• Place the focus on the or button at the right edge of the screen, and then press the touch pad.
• Drag or flick up or down the line on either the left or right edge of the touch pad.
• Place the focus on the or button at the right edge of the screen, drag or flick up or down on the touch pad.
Using the Top Icons
Use the Back, Forward, and Opened pages icons on the top left of the screen to navigate through pages. These icons are available after you have viewed two or more pages.
Returning to the Home Page
To return to the home page, select the a button or select on the top right of the screen.
✎ To select a letter button ( a , b , { , } ), press the MORE button on the
Smart Touch Control to display to display the virtual remote panel on the
TV screen. Flick the touch pad until the playback control panel appears, select the a button, and then press the touch pad.
Searching the Index
Select the b button or select on the top right of the screen to display the index. Select a term to display the page containing the term.
Searching Pages
Select the { button or select on the top right of the screen, and enter search criteria. Select a page from the list of search results to display it.
English - 15
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 15 2013-10-29 �� 1:30:47
Network Configuration
Closing the e-Manual
To close the e-Manual, press and hold the RETURN button or select at the upper-right corner of the screen.
Jumping to a Menu Item
To jump directly to the menu item that is described in the current section, select . It is possible to jump from a menu item directly to the related section in the e-Manual. On a menu screen, press the MORE button on the
Smart Touch Control and then select e-Manual on the virtual remote panel that appears on the screen.
✎ This feature may not be available, depending on the menu.
Picture
Picture Mode
• Backlight
• Contrast
• Brightness
• Sharpness
• Color
• Tint (G/R) G50
Standard
14
100
45
50
50
R50 e-Manual
Try Now
Connecting to a Network
Connecting the TV to a network gives you access to online services such as Smart Hub and lets you update the TV's software online directly from
Samsung.com.
Network Connection - Wireless
Connect the TV to the Internet using a standard wireless router or modem.
Wireless IP Router or Modem that has a DHCP Server
The LAN Port on the Wall
LAN Cable (Not Supplied)
Updating the e-Manual
Press the ™ button and select Apps, and then select More Apps. The e-Manual can be updated in the same way with an application update.
On the More Apps screen, select Update Apps, and then select e-Manual from the list. The e-Manual starts updating to the latest version. However,
Update Apps appears on the screen only when the update is required.
Wireless Network Precautions
• This TV supports the IEEE 802.11a/b/g /n communication protocols.
Samsung recommends using IEEE 802.11n. Otherwise, when you play video over a network connection, the video may not play smoothly.
English - 16
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 16 2013-10-29 �� 1:30:49
English - 17
English - 16
• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.
• Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently being used by another device, the result is usually interference and/or a communications failure.
• Most wireless networks have an optional security system. To enable a wireless network's security system, you need to create a security key using characters and numbers, and then enter that key into the router through its menu. You then must enter this security key into any other devices you want to connect to the wireless network.
Network Security Protocols
The TV only supports the following wireless network security protocols:
• Authentication Modes: WEP, WPAPSK, WPA2PSK
• Encryption Types: WEP, TKIP, AES
In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security encryption in networks running in the
802.11n mode.
If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC (Push Button Configuration) or a PIN
(Personal Identification Number). WPS automatically configures the SSID and
WPA key settings.
Your Smart TV cannot connect to uncertified wireless routers.
Network Connection - Wired
There are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:
The Modem
Port on the Wall
The LAN Port on the Wall
Modem Cable
(Not Supplied)
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)
The Modem
Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
LAN Cable
(Not Supplied)
LAN Cable (Not Supplied)
IP Router that has a DHCP Server
LAN Cable
(Not Supplied)
One Connect
One Connect
One Connect
LAN Cable (Not Supplied)
✎ The TV does not support network speeds less than or equal to 10Mbps.
✎ Use Cat 7 cable for the connection.
English - 17
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 17 2013-10-29 �� 1:30:51
3D Basics
3D Active Glasses
Features
Samsung's SSG-3570CR 3D glasses enable you to view 3D images on your
3D TV. The Samsung 3D glasses communicate with Samsung 3D TVs via the
2.4GHz RF band.
✎ This product can be used only with Samsung D, E, and F series 3D TVs released in 2011 to 2013 or with 3D TVs that have any of the logos below.
Other wireless devices are not compatible with this product.
Parts
Charging the Battery
If the red LED blinks every 2 seconds, charge the battery as shown below.
The orange LED will blink every second when battery charging is in progress.
The green LED will blink every 2 seconds when the charging is finished. (It takes about 30 minutes to fully charge the battery that is dead; however, the time required to charge it to full capacity may vary depending on the battery level and the voltage of the supplied power.)
SAMSUNG TV
PC
Nose pad USB PORT
Note Book
Micro USB Cable
Liquid-crystal shutter pairing button
The nose pads are adjustable.
✎ To wear the 3D glasses over eyeglasses, detach the nose pad from the
3D glasses.
✎ For details on how to attach or detach the glasses' Nose pad, refer to the separate 3D glasses manual.
English - 18
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 18 2013-10-29 �� 1:30:52
English - 19
English - 18
Pairing 3D Active Glasses
✎ What is Pairing? Pairing is a process that prepares devices to exchange data so that, in operation, the devices can transmit and exchange data instantly.
• Pairing
Press the pairing button on the 3D glasses for more than 1 seconds. Pairing will start.
• Turning the glasses on and off
Put on the 3D glasses. The glasses will automatically power on and the green
LED will be lit for 3 seconds. To power off the glasses, take off the glasses. Several minutes later, the glasses will automatically power off and the red LED will be lit for 3 seconds.
(Make sure that 3D is activated on the TV before using the 3D glasses.)
• Operating range
Recommended pairing distance
2~6m
50cm
Recommended viewing distance
Recommended viewing distance
2~6m (6.5 to 19.5 ft)
Recommended pairing distance
50 cm or less (19.5 in)
✎ The working distance depends on obstacles (a person, metal, walls, etc.) or electromagnetic waves.
✎ Note that if you take off the 3D glasses while viewing 3D video and the
3D mode remains enabled on your TV, it will take 5 minutes for the 3D glasses to power off.
✎ If the glasses do not operate immediately when you put them on while the
TV is in 3D mode, put the glasses on again.
✎ This product is rechargeable. It may not operate due to the dead battery when you attempt to use it for the first time. In this case, charge the battery.
English - 19
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 19 2013-10-29 �� 1:30:52
Pairing for the first time
1. Turn on the TV and wait until the TV is fully on.
2. Press the pairing button on the 3D glasses shortly. The 3D glasses will power on and pairing will start.
3. The message “3D glasses are connected to TV.” will be displayed on the
TV screen when the pairing is successfully completed.
4. Enjoy 3D video after configuring the 3D function settings on the TV.
• After the first pairing, putting on the 3D glasses will automatically power on the glasses. To power off, take off the glasses.
• If the pairing fails, the 3D glasses will power off.
• If the first attempt to pair fails, turn the TV off and on again, and then go to Step 2.
• The LED will blink green and red alternately for 1 seconds if pairing is in progress.
How to pair again: Press the pairing button on the 3D glasses for more than
1 seconds.
Pairing is needed again in the following occasions:
− Pairing may be needed again after you have had your 3D TV repaired.
− If you want to play 3D content on another Samsung 3D TV model that belongs to the D, E, or F series released in 2011 through 2013.
Watching 3D Video
Some 3D modes may not be available depending on the format of the image source.
To watch in 3D, you must wear 3D Active Glasses and turn the glasses on by pressing the power button.
1. Go to the 3D screen. (Picture > 3D)
2. Select the 3D Mode. The 3D Mode screen appears.
3. Set the 3D Mode of the image you want to view.
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 20
English - 20
2013-10-29 �� 1:30:53
English - 21
English - 20
Troubleshooting and Other Information
Troubleshooting
If you encounter...
My 3D glasses do not work.
The LED keeps blinking
Try this...
The 3D glasses should be close to the TV. Move the 3D glasses to within 6m
(19.5 ft) of the TV.
Try the paring again in order to check if it is completed.
Check the 3D function settings on the TV.
Take off the glasses and put them on again. The glasses may not be turned on if not properly worn.
The battery is low. Charge the battery.
What is Remote Support?
Samsung Remote Support service offers you one-on-one support with a
Samsung Technician who can remotely:
• Diagnose your TV
• Adjust the TV settings for you
• Perform a factory reset on your TV
• Install recommended firmware updates
How Does it Work?
Having a Samsung Tech remotely service your TV is easy.
Specifications (Model Number: SSG-3550CR/SSG-3570CR)
Optics
Weight
Power
Power consumption
Operating conditions
Shutters
Recommended operating distance
Glasses
Liquid crystal
2~6m (6 to 19.5 ft)
29g (0.99 oz)
Glasses
Glasses
Battery
Operating temperature
Custody temperature
Transmittance
Field Rate
Built-in 3.7V Lithium-polymer battery
1.12mA
Type
Operating time
65mAh, 3.7V
40Hr
50 °F ~ 104 °F (10°C ~ 40°C)
-4 °F ~ 113 °F (-20°C ~ 45°C)
37±2%
120 fields/second
✎ Product specifications may be changed without notice in order to enhance product performance.
✎ The continuous operating time may differ depending on the wireless communication environment and usage conditions.
1. Call the Samsung Contact
Center and ask for remote support.
2. Open the menu on your TV and go to the Support section.
3. Select Remote Management and
Provide the Pin# to the agent.
4. The agent will then access your
TV. That's it!
English - 21
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 21 2013-10-29 �� 1:30:53
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solutions. Also, review the Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung.com/support or call
Samsung Customer Service at 1-800-SAMSUNG (1-800-726-7864).
Issues
Flickering and Dimming
Component Connections /
Screen Color
Screen Brightness
Auto Motion Plus/Blur
Unwanted Powering Off
Solutions and Explanations
If your Samsung Television is flickering or dimming sporadically, you may need to disable some of the energy efficiency features.
Disable Energy Saving (System > Eco Solution > Eco Sensor) and/ or Energy Saving (System > Eco Solution > Energy Saving) and check again.
If you find that the color on your Samsung television screen is not correct or the black and white colors are off, run a Self Diagnosis Picture Test (Support
> Self Diagnosis > Picture Test).
If the picture problem is caused by the TV, the problem should be visible in the Picture Test. If the problem is not visible, next confirm that the TV's video input ports are connected to the correct external video device output ports and that none of the connections are loose. Finally, if possible, test your external video devices by connecting them to another TV.
If you find that the colors on your Samsung TV are correct but just a little too dark or bright, try adjusting the following settings first.
Navigate to Picture and adjust Backlight, Contrast, Brightness,
Sharpness, Color, Tint (G/R) and other picture quality adjustment settings.
If you find that there is a blur or “ghost” shadow to the images on your television screen, you might be able to correct the issue using Auto Motion
Plus (Picture > Picture Options > Auto Motion Plus).
If your Samsung TV appears to turn off by itself, try disabling some of the TV's energy efficiency and automatic off features. Check if Sleep
Timer (System > Time > Sleep Timer) has been enabled. Sleep Timer automatically turns off the TV after an amount of time that you select. If the
Sleep Timer has not been enabled, see if No Signal Power Off (System >
Eco Solution > No Signal Power Off) or Auto Power Off (System > Eco
Solution > Auto Power Off) has been enabled. No Signal Power Off turns off the TV if no signal has been received by the TV for a specified period time.
Auto Power Off turns off the TV if there has been no user input in four hours.
Issues
Trouble Powering On
Cannot Find a Channel
Solutions and Explanations
When the TV is turned on, the remote control receiver flashes 5 times before the screen turns on.
If you find that you are having problems powering on your Samsung television, there are a number of things to check before calling the service department.
If the power cord is connected properly and the remote control is operating normally, the problem might be with the antenna cable connection or the cable/satellite box not being turned on. Check the antenna connection or turn on the cable/satellite box.
Re-run Setup (Go to Menu > System > Setup) or run Auto Program. (Go to Menu > Broadcasting > Auto Program).
✎ For detailed troubleshooting information, watch the troubleshooting videos at www.samsung.com/spsn.
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and Ports are shown below.
Cable Plugs Ports
HDMI
USB
Optical
Warning
Do not plug cables in upside down.
Be sure to check the orientation of the plug before plugging it in.
English - 22
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 22 2013-10-29 �� 1:30:55
English - 23
English - 22
Issues
The TV won’t turn on.
There is no picture/video.
The picture is good but there is no sound.
The remote control does not work.
The cable/set top box remote control doesn’t turn the TV on or off or adjust the volume.
Solutions and Explanations
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the below.
P button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “Remote control does not work”
• Check the cable connections. Remove and reconnect all cables connected to the TV and external devices.
• Set the video outputs of your external devices (Cable/Sat Box, DVD,
Blu-ray etc) to match the TV's input connections. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the correct input source.
• Reboot the connected device by unplugging it, and then reconnecting the device’s power cable.
• Please check the volume of the device (cable/satellite box, DVD, Blu-ray, etc.) connected to your TV.
✎ To make it possible to adjust the connected audio device’s volume, use the Sound Share function or make sure that the audio device is connected to the TV’s HDMI (ARC) port.
• Replace the remote control batteries. Make sure the batteries are installed with their poles (+/–) in the correct direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
• Program the Cable/Set remote control to operate the TV. Refer to the
Cable/Set-Top-Box user manual for the SAMSUNG TV code.
✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. There may be, however, a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
✎ To keep your TV in optimum condition, upgrade to the latest software.
Use the Update Now or Auto Update functions on the TV's menu (Screen
Menu > Support > Software Update > Update now or Screen Menu >
Support > Software Update > Auto Update).
Mounting the TV on the Wall
Wall Mounting
If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product.
VESA Wall Mount Kit Notes and Specifications
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the TV on a slanted wall, it may fall and result in severe personal injury.
English - 23
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 23 2013-10-29 �� 1:30:56
✎ NOTE
• Standard dimensions for wall mount kits are shown in the table below.
• Do not use screws that do not comply with VESA standard screw specifications.
• Do not use screws that are longer than the standard length or do not comply with VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
• Always have at least three people mount the TV on to a wall.
Product Family TV size in inches
VESA screw hole specs
(A * B) in millimeters
Standard Screw Quantity
LED-TV
[UHD]
85 1000 X 800 M8 4
Eco Sensor and Screen Brightness
Eco Sensor measures the light in your room and optimizes the brightness of the TV automatically to reduce power consumption. This causes the TV to brighten and dim automatically. If you want to turn this function off, go to
Menu > System > Eco Solution > Eco Sensor
Eco Sensor
[ Do not block the sensor with any material. It can decrease picture brightness.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury from electric shock.
English - 24
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 24 2013-10-29 �� 1:30:56
English - 25
English - 24
Maintenance
✎ If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean the debris off before watching TV.
✎ The exterior and screen of the product can get scratched during cleaning.
Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches.
TV Upgrade using One Connect
(sold separately)
One Connect
(sold separately)
TV
Do not spray water directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dampened with a small amount of water. Do not use a flammable liquid
(e.g. benzene, thinners) or a cleaning agent.
Connecting a more current version of One Connect (sold separately) to your
Samsung TV will allow you to enjoy the latest features and content without having to purchase a new TV. Experience the latest features and services offered by Samsung Electronics via One Connect.
✎ One Connect is sold separately. Purchasing One Connect will allow you to upgrade the software to the version from the year in which your One
Connect was released. Not supported on all models.
English - 25
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 25 2013-10-29 �� 1:30:57
Specifications
Specifications
Display Resolution
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Model Name
Screen Size
(Diagonal)
Dimensions (W x H x D)
Weight
3840 x 2160
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
UN85S9VF
85˝ Class
(84.5 measured diagonally)
74.9 x 42.9 x 2.1 inches
(1903.0 x 1091.0 x 55.6 mm)
129.1 lbs (58.6 kg)
✎ Design and specifications are subject to change without prior notice.
✎ The actual appearance of the TV may differ from the images in this manual, depending on the model.
✎ This device is a Class B digital apparatus.
✎ For information about the power supply, and more information about power consumption, refer to the label attached to the product.
✎ Typical power consumption is measured according to Energy Star
Program requirements for Televisions.
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799
Standby mode
To decrease power consumption, unplug the power cord when you don't intend to use the TV for a long time.
Licenses
English - 26
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 26 2013-10-29 �� 1:30:58
English - 27
English - 26
Guides
Warranty Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du
Canada.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
English - 27
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 27 2013-10-29 �� 1:30:58
IMPORTANT WARRANTY INFORMATION REGARDING
TELEVISION FORMAT VIEWING
✎ See the warranty card for more information on warranty terms.
Wide screen format LED Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen, 16:9 ratio format, or expanded to fill the screen, if your model offers this feature, with the images constantly in motion. Displaying stationary graphics and images on the screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing time per week.
Additionally, viewing other stationary images and text such as stock market crawls, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions.
Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful about the television formats you select and the length of time you view them. Uneven LED aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY
STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair
Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG
Authorized Service Center. Along with this Statement, the Original Limited
Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service
Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, inhome or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
− In the United States: 1-800-SAMSUNG (1-800-726-7864)
− In Canada: 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files), still image elements
(such as TV channel logos, stock or news bars at the screen bottom etc.), or programs in panorama or 4:3 image format on the screen. Constantly displaying still pictures can cause image burn-in on the LED screen, which will affect image quality. To reduce risk of this effect, please follow the recommendations below:
• Avoid displaying the same TV channel for long periods.
• Always try to display any image in full screen. Use the TV set’s picture format menu for the best possible match.
• Reduce brightness and contrast to avoid the appearance of after-images.
• Use all TV features designed to reduce image retention and screen burn.
Refer to the e-Manual for details.
English - 28
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 28 2013-10-29 �� 1:30:59
English - 29
English - 28
Regulatory Compliance Statements
(For 3D Active Glasses)
FCC COMPLIANCE
Federal Communication Commission Interference Statement
1. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA USA ONLY
This perchlorate warning applies only to primary CR
(Manganese Dioxide)
Lithium coin cells in the product sold or distributed ONLY in California
USA
" Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate."
English - 29
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 29 2013-10-29 �� 1:30:59
SAMSUNG BRAND PRODUCTS
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for period as shown below:
Categories
UN85S9VF
Parts
2 Year
Labor
2 Year
Size
85"
Service
In Home
For Commercial Use, the warranty is 90 Days Parts and Labor.
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
Certain products are eligible for In-home service at Samsung’s discretion. To receive in-home service, the product must be unobstructed and accessible to service personnel. If during in-home service, repair cannot not be completed, it may be necessary to remove, repair and return the product. If in-home service is unavailable,
SAMSUNG may elect, at our option, to provide for transportation of our choice to and from a SAMSUNG authorized service center. Otherwise, and for 37" and smaller LCD/LED TV, transportation to and from the
SAMSUNG authorized service center is the responsibility of the purchaser.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finishes; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems; brightness related to normal aging, or burned-in images.
SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND
NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY
AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY
OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT
SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR
PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT,
REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND
AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY
SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER
ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S
PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO
USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG.
THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF
THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG at:
Samsung Electronics America, Inc.
85 Challenger Road
Ridgefield Park, NJ 07660-2112
1-800-SAMSUNG (7267864) – www.samsung.com
1-800-749-0260: Projectors only
English - 30
[UN85S9VF-ZA]BN68-05628A-00ENG.indb 30 2013-10-29 �� 1:30:59

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Smart Hub with apps and social media
- 3D viewing capability
- Anynet+ (HDMI-CEC) control
- Integrated e-Manual
- One Connect external device connection
- Voice recognition
- Sound Share functionality