Sanyo DP26670 - 26" Diagonal LCD/DVD HDTV Combo Owner's Manual

Add to my manuals
41 Pages

advertisement

Sanyo DP26670 - 26

diagonal / diagonale 66cm

31.5

diagonal / diagonale 80cm

Owner’s Manual

Manual del usuario

Manuel d’instructions

HDTV LCD / DVD Combo

Combo TVHD de LCD / DVD

TVHD Combine ACL / DVD

© 2010 Sanyo Manufacturing Corporation

D P26670

DP32670

Model No. / No. de Modelo / Nº de modèle

Part No. / No. de parte / Nº de piece: J54H0521B 26-Z5AE

2

ENGLISH

ONE-YEAR LIMITED PARTS AND LABOR WARRANTY

THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PUR-

CHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO,

EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY

APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT APPLY TO PRODUCTS

USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.

WARRANTY APPLICATION

FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing Corporation (SMC) warrants this TV to be free from manufacturing defects in materials and workmanship under normal use and conditions for parts and labor.

For the FIRST 90 DAYS from the date of original retail purchase, Sanyo Manufacturing Corporation will replace any defective TV via exchange at the retailer. To ensure proper warranty application, keep the original-dated-sales receipt for evidence of purchase. Return the defective TV to the retailer along with the receipt and the included accessories, such as the remote control. The defective TV will be exchanged for the same model, or a replacement model of equal value, if necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo

Manufacturing Corporation.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

OBLIGATIONS

For one year from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from defects in material and workmanship under normal use and conditions. During the first 90 days under this warranty for any manufacturing defect or malfunction Sanyo

Manufacturing Corporation will provide a new TV via exchange at the retailer.

HOW TO MAKE A CLAIM UNDER THIS WARRANTY

Please call 1-800-877-5032. Please be prepared to give us the television’s model number and serial number when you call. The model number and serial number are printed on a label attached to the back of the unit.

For customer assistance, call toll free 1-800-877-5032.

This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which vary from state to state.

(EFFECTIVE: March 1, 2007)

Your Sanyo HDTV is registered at the time of purchase, please keep sales receipt for future reference.

For your protection in the event of theft or loss of this product, please fill in the information requested below and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.

Model No. _________________________ Date of Purchase ____________________

Serial No ._________________________ Purchase Price ______________________

Where Purchased ____________________

Sanyo Manufacturing Corp.

3333 Sanyo Road, Forrest City, AR 72335

TRADEMARKS

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

This product incorporates copy protection technology that is protected by U.S. and other intellectual property rights. The use of Rovi Corporation’s copy protection technology in the product must be authorized by Rovi

Corporation. Reverse engineering or disassembly is prohibited.

is a trademark of DVD Format/Logo Licensing Corporation.

Manufactured under license under U.S.Patent#: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks and DTS Digital

Out and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All

Rights Reserved.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

“As an Energy Star® Partner, Sanyo Manufacturing Corporation has determined that this product meets the EnergyStar® guidelines for energy efficiency.”

This symbol on the nameplate means the product is Listed by Underwriter’s Laboratories Inc.

It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.

SANYO recommends keeping the TV set at its factory settings or moving Energy Saver settings from “Level

1” to “Level 2” or “Level 3” to further reduce power requirements and increase energy savings. Doing so contributes to the sustainability of our resources and environment.

For more information visit www.energystar.gov

3

4

ENGLISH

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY

FROM THIS PRODUCT AT TIMES.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN

BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE

READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN

FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE

MAINTENANCE, CONTACT AN AUTHORIZED SERVICE

LOCATION-SEE SERVICE PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE

PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO THE LASER BEAM,

DO NOT TRY TO OPEN THE ENCLOSURE. RADIATION MAY

BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO

NOT STARE INTO THE BEAM.

CLASS 1

LASER PRODUCT

Location of the required Marking

The rating sheet and the safety caution are on the rear of the unit.

CERTIFICATION: COMPLIES WITH FDA

RADIATION PERFORMANCE STANDARDS, 21

CFR SUBCHAPTER J.

Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated

June 24, 2007.

The lamp(s) within this product contain mercury.

Disposal should be in compliance with local, state or federal laws.

15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus.

16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

19) If an outside antenna or cable system is

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN WIRE connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National

Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge

ELECTRIC SERVICE

EQUIPMENT

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS unit, size of grounding conductors, location of antenna discharge unit, connection to

NEC-NATIONAL

ELECTRICAL CODE

S2898A

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H) grounding electrodes, and requirements for the grounding electrode.

20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

22) Keep your fingers clear of the disc slot as it is closing. It may cause injury.

5

6

IMPORTANT SAFETY INSTRUCTIONS

(continued)

23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage.

25) Do not allow the product to output distorted sound for an extended period of time. It may cause speaker overheating and fire.

26) When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage.

27) Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the laser beam. It may cause eye damage.

28) Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

29) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

30) The socket-outlet must be installed near the unit and easily accessible.

CONDENSATION

Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired.

To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.

Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In such cases, change the location of the player.

HOW TO HANDLE THE LCD PANEL

Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.

If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.

If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE

The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.

Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury.

THIS MANUFACTURER CARES!

The consumer electronics industry is committed to making home entertainment enjoyable and safe.

TUNE INTO SAFETY

One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display.

Carefully read and understand all enclosed instructions for proper use of this product.

Don’t allow children to climb on or play with furniture and television sets.

Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

Remember that children can become excited while watching a program, especially on a “larger than life” flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.

Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

Follow all instructions supplied by the display and wall mount manufacturers.

If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation.

Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/ product and wall mount. If you are unsure, contact a professional installer.

A minimum of two people are required for installation. Flat panel displays can be heavy.

SAFETY PRECAUTIONS

The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit.

10cm

10cm

Notes when mounting the LCD TV/DVD on a wall

If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV/DVD for advice, and have the equipment professionally installed. Incomplete or improper installation may cause injury to you, and/or damage to the LCD TV/DVD.

IMPORTANT NOTICE

Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your

LCD Panel on for long periods of time while it is displaying the following formats or images:

• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.

Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).

The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any responsibility for these symptoms.

LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be missing picture elements or have luminous spots.

This is not a sign of a malfunction.

Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some equipment placed too near this unit may cause interference.

Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless headphones.

7

8

Features

LCD color TV With DVD/CD player

Unique space saving design combines a 26/32 LCD color TV and a DVD/CD player.

A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a

DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language selection, or multi-angle, etc.

The DVD PLAYER can play back both audio CDs and MP3/WMA/JPEG CDs.

Compatible with a wide range of DVD audio outputs

Digital Audio Jack (Coaxial)

When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect of being in a movie theater or a concert hall.

Surround standard is different from Dolby Digital. This format is already in use in many theaters. By connecting this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs recorded in this format can be enjoyed. However, audio will not be output from the analog audio output jacks.

By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs recorded in this format can be enjoyed.

The Linear PCM sound of a 48 kHz/24 bit through 96 kHz/24 bit exceeds audio CD sound.

Convenience Features

Direct selection of your desired scenes using Title/Chapter/Time/Track - You can play back from the desired scene.

Recalling Up to 12 Scenes - You can program up to 12 scenes in memory and recall the marked scenes.

Frame Advance - The PAUSE moves one frame at a time.

Slow Motion - The SLOW moves you back and forth through the program by 4 steps of 1/16-1/2 times.

Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.

Program Playback (Audio CD/MP3/WMA/JPEG CD) - You can play back tracks in programmed sequences.

Zoom - You can zoom in the selected subject on the screen during playback.

Note: Make sure that discs are suitable for the following functions.

Multi-Language - Maximum 32 language subtitles and maximum 8 language soundtracks can be played back for movies or programs.

Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc, you can change the angles during playback.

Parental Control - You can limit the play back of scenes or sounds of DVD discs that have a rating level encoded on the disc.

Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor.

TV Features

Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.

Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers.

Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.

Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up to 120 minutes to turn off automatically.

On-Screen 3 Language Display - You can select one of 3 languages, English, Spanish or French for onscreen programming.

V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded with this information. V-chip will allow you to set a restriction level.

Contents

Before using your unit

WARRANTY .....................................................2

TRADEMARKS .................................................3

IMPORTANT SAFETY INSTRUCTIONS ...........5

SAFETY PRECAUTIONS .................................7

IMPORTANT NOTICE .......................................7

Features ............................................................8

Contents ...........................................................9

Disc.................................................................10

Location of controls .........................................11

How to attach the stand ..................................12

How to remove the stand ................................12

Remote control ...............................................13

Power source ..................................................14

Antenna connections ......................................15

Cable TV connections .....................................16

TV operation

Starting setup .................................................17

TV operation ...................................................17

Quick guide for menu operation ......................18

Convenience functions ...................................19

Memorizing channels ......................................20

Checking the digital signal strength ................21

Labeling channels ...........................................21

Labeling video inputs ......................................21

Setting the V-Chip ...........................................22

Closed Caption ...............................................23

CC advanced ..................................................23

Setting the picture size ....................................24

DVD operation

Preparation .....................................................25

Status display of disc ......................................25

Playback procedure ........................................25

Special playback .............................................26

Zooming ..........................................................26

Locating desired scene ...................................26

A-B Repeat playback ......................................26

Marking desired scenes ..................................27

Changing angles .............................................27

Changing soundtrack language ......................27

Subtitles ..........................................................27

Using HOME MENU .......................................28

Play mode .......................................................28

Audio Settings menu .......................................29

Video Adjust menu ..........................................30

Quick guide for DVD menu operation ..............30

Function Setup ................................................31

Parental Control ..............................................32

Additional information

Language Code List ........................................33

Country/Area Code List ..................................33

Connections to other equipment .....................34

Reception disturbances ..................................38

Problems and troubleshooting ........................39

Specifications ................................................41

9

10

Disc

Playable discs

Disc type and logo mark

DVD Video

CD-DA content

The following discs are also available.

DVD-R/RW discs of DVD video format.

CD-R/RW discs of MP3/WMA/JPEG.

Audio

+

Video

(moving pictures)

Audio

CAUTION:

Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be played.

8cm discs can be played directly. If an 8cm disc adapter is used it will cause errors.

If you insert an irregular shaped disc, it may get stuck and cause a malfunction.

The use of a ring protector or other disc accessories will cause errors.

This unit is to be used exclusively with the NTSC color system. PAL and SECAM system discs cannot be used with this unit.

Some CD-R/RWs and DVD-R/RW cannot be played back depending on the recording conditions.

Region Number

Region number (Regional restriction code) is built-in to the unit and DVD video discs.

Region number “1” or “ALL” of DVD video discs can be used on this unit.

1

ALL

Title

When two or more movies are recorded on a disc, the disc is divided into two or more sections. Each section is called a “TITLE”.

Chapter

The titles can be subdivided into many sections.

Each section is called a “CHAPTER”.

Track

An Audio CD can contain several items.

These are assigned to the tracks.

DVD DISC

TITLE 1

CHAPTER 1 CHAPTER 2 CHAPTER 1

TRACK 1 TRACK 2

TITLE 2

CHAPTER 2 CHAPTER 3

Audio - CD

TRACK 3 TRACK 4 TRACK 5

Removing Disc from Case

Be sure to hold the edge of disc. Do not touch the surface of the disc.

Pick up the disc gently from the case.

Do not scratch the disc.

Do not get dirt on the surface of the disc.

Do not stick a label or adhesive tape on the disc.

Do not drop or bend the disc.

Storing Disc

Store the disc in the case to avoid risk of scratches, dirt or damage.

Do not leave disc exposed to direct sunlight or in hot or humid places.

Cleaning Disc

Wipe the disc with a clean, dry cloth from center to edge.

Do not wipe the disc in a circular motion.

Do not use liquid or aerosol cleaners.

Front

Rear side

Remote sensor

Location of controls

Left side

DISC slot

EJECT button

VOLUME +/– buttons

CHANNEL /1

(PLAY) button

CHANNEL /3

(STOP) button

MENU button

INPUT/ENTER button

POWER button

POWER indicator To display the menu screen.

Press MENU button to display the menu screen.

CHANNEL / buttons, VOLUME

+/– buttons and INPUT/ENTER button can be used to select the desired setting during the menu screen operations.

PC MONITOR IN jack

VAR (VARIABLE) AUDIO OUT jack

DIGITAL AUDIO COAXIAL OUT jack

RF (ANT.) IN jack

AC INPUT jack HDMI 2 IN jack

COMPONENT IN jacks

HDMI 1/DVI IN jack

LINE 2 VIDEO IN jack

PC/DVI AUDIO IN jack

LINE 1 IN jacks (VIDEO/S-VIDEO/AUDIO (L/R))

AUDIO (L/R) jacks

(for COMPONENT IN and LINE2 VIDEO IN)

11

12

How to attach the stand

NOTE:

• Unplug the AC cord from the AC INPUT terminal.

• Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit.

• Do not touch or press the LCD-screen, glass might break under pressure.

Place the TV on its front onto a table.

Align the stand’s bottom-plate (supplied) as seen here.

It will fi t in only one direction.

Hold the unit and attach the stand slowly.

Finally secure the bottom-plate with 2 screws (supplied).

Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

How to remove the stand

When you transport this product, remove the stand and pack fl at against the back of the unit in the carton. To remove the stand, perform these steps in reverse order.

For wall mounting, the stand must be removed (see page 7).

Remote control

TOP MENU

CCD/

JUMP

RETURN

AUDIO

SUBTITLE

ANGLE

PLAY MODE

SLOW

MARKER

REPEAT A-B

SEARCH

PLAY

SKIP

PAUSE

POWER

DISPLAY

Power On/Off

Call TV information

Call DVD information

Switch between TV and DVD TV/DVD

(EJECT)

0-9

SLEEP

Eject a disc

Direct channel selection of TV

Input setting

Enter a password

Input “–” for digital channels

Sleep timer

SETUP/

TV MENU

TV mode - Display menu of TV

DVD mode - Call up initial setup mode

PICTURE SIZE Display PICTURE SIZE menu

▲▼◀▶

ENTER

Cursor buttons

Enter information in the menu

MUTE

EXIT/

CANCEL

Switch off the sound

Exit from On-Screen menu

Reset information in the menu

VOL +/– Adjust volume of TV

INPUT SELECT Display source selection menu

RECALL/

ZOOM

CH /

DVD MENU

Switch between present/last channel

Zoom

Select channel of TV

Display DVD menu

STOP

Select title

Closed Caption

Locating desired scene

Remove DVD setup menu

Change sound track language

Set subtitle

Change playback angle

Select playback mode

Forward/Reverse- slow motion

Index

Repeat playback between A and B

Fast Forward/Review playback

Playback

Skip chapter to forward or reverse direction

Pause CD sound

Still picture of DVD

Stop

13

Remote control (continued)

Inserting Batteries

1

Open the battery compartment cover in the direction of the arrow.

2

Install two “AA” batteries, paying attention to the polarity diagram in the battery compartment.

3

Replace the compartment cover.

Operation

Aim the remote control at the remote sensor and press control buttons to operate.

Operate the remote control within a 30° angle on either side of the remote sensor, up to a distance of approximately 15 feet.

Approximately 15 feet

NOTE:

Do not leave the remote control unit exposed to direct sunlight or in hot or humid places.

The remote control unit uses infrared beams to transmit signals, so sunlight or fluorescent light on the remote sensor may shorten operating distance.

Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or rechargeable, (ni-cad, ni-mh, etc) batteries.

Remove batteries if the remote control will not be operated for an extended period of time.

Power source

TO USE AC POWER

1.

2.

Connect the AC cord plug into this unit’s AC IN jack.

Connect the AC cord into an AC outlet.

AC Outlet

Wider Hole and Blade

AC cord (supplied)

AC 120V, 60Hz

14

NOTE:

Please make sure to insert the cord securely at both the LCD TV/DVD and the wall outlet.

The AC Cord has a polarized type AC line plug. If the supplied AC cord does not match your AC outlet, contact a qualified electrician.

WARNING:

DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC

CORD. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.

DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE SPECIFIED. THIS COULD CAUSE

FIRE, ELECTRICAL SHOCK, OR DAMAGE.

CAUTION:

WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF

SAFETY, BE SURE TO UNPLUG IT FROM THE AC OUTLET.

DO NOT PLUG/UNPLUG THE AC CORD WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL

SHOCK.

IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED ONE IS

RECOMMENDED. CONTACT CUSTOMER SERVICE AT 1-800-877-5032.

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 16 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Antenna

Jack

Antenna

Jack

Connect the 75 ohm cable from the combination

VHF/UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matching transformer may be necessary.

75 ohm

Coaxial

Cable

300-75 ohm

Matching

Transformer

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna

Jack

Connect the UHF 300 ohm twin-lead wire to the Combiner (not supplied). Connect the VHF

300 ohm twin-lead wire to the 300-75 ohm

Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the

Antenna Jack.

Combiner

UHF 300 ohm

VHF 300 ohm

300-75 ohm Matching Transformer

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Antenna

Jack

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the Combiner (not supplied).

Attach the Combiner to the Antenna Jack.

Combiner

UHF 300 ohm

VHF 75 ohm

15

16

Cable TV connections

This TV has an extended tuning range and can tune most cable channels without using a Cable TV

Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.

Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.

For subscribers to basic Cable TV service

Antenna

Jack

For basic Cable TV service not requiring a Converter/

Descrambler box, connect the 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the TV.

75 ohm

Coaxial Cable

For subscribers to scrambled Cable TV service

If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial

Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel

3 or 4) and use the Converter/Descrambler box to select channels.

Incoming

75 ohm

Cable TV

Cable

Converter/

Descrambler

75 ohm Cable to TV

Antenna

Jack

For subscribers to unscrambled Cable TV service with scrambled premium channels

If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from the Cable TV company or an electronics supply store). Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the

“A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the

Converter/Descrambler box to tune scrambled channels.

Incoming

75 ohm

Cable TV

Cable

Splitter

Converter/

Descrambler

A/B Switch

A

B

75 ohm Cable to TV

Antenna

Jack

Starting setup

The Starting Setup menu appears the first time you turn on the TV, and assists you to specify the

Air/Cable setting, and program your channels automatically.

IMPORTANT: Make sure that the antenna or cable

TV system connection is made!

1

To turn on the TV, press POWER (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.). The starting setup function begins.

Auto Setup

TV Location

Signal Type

Store

Cable

Automatic Search Start

This unit has been preset to STORE brightness

This setting does not qualify under Energy

Star V4.0. To reduce brightness and energy consumption, change setting to ‘HOME’. This setting does qualify under Energy Star V4.0.

: Select : Adjust 2

Press ▲/▼ to select “TV Location”, then press

◀/▶ to select “Home” or “Store”. This product qualifies for ENERGY STAR In Home mode default setting.

NOTE:

This unit has been preset to STORE brightness.

This setting does not qualify under Energy

Star V4.0. To reduce brightness and energy consumption, change setting to ‘HOME’. This setting does qualify under Energy Star V4.0.

The device may not conform to the Energy Star

4.0 standard after Reset is performed or the

Backlight is adjusted.

3

Press ▲ or ▼ to select “Signal Type”, then press

◀ or ▶ to select “Cable” or “Air”.

4

Press ▲ or ▼ to select “Automatic Search”, then press ▶ or ENTER.

5

Now the “Auto Setup” starts. After the starting setup is completed, the TV channel appears on the screen.

• Depending on the reception condition, it may take from 15 minutes to 30 minutes to complete memorizing digital cable channels. Please be patient.

NOTE:

If you press ENTER in the process of “Auto Setup”, the Starting Setup stops and changes to the normal screen.

When you make a menu selection, your changes occur immediately. You do not have to press EXIT/

CANCEL to see your changes.

TV operation

1

To turn on the TV, press POWER.

(POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.)

2

Adjust the volume level by pressing VOL + or .

The volume level will be indicated on the screen by blue bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of blue bars also decreases.

3

Set the Signal Type option to the appropriate position (see “Air/Cable selection” on page 20).

4

Press the Direct Channel Selection (0-9, –) buttons to select the channel.

(If you press only channel number, channel selection will be delayed for a few seconds.)

TO SELECT ANALOG CHANNELS

1-9: Press 1-9 as needed. Example, to select channel 2, press 2, then press

ENTER.

10-99: Press the 2 digits in order. Example, to select channel 12, press 1, 2, then press ENTER.

100-135: Press the 3 digits in order. Example, to select channel 120, press 1, 2, 0, then press ENTER.

TO SELECT DIGITAL CHANNELS

Press the first 1-3 digits, then press the button, followed by the remaining number.

Example, to select channel 15-1, press 1, 5,, 1, then press ENTER.

If a channel is selected with only audio content,

“Audio only” will be displayed on the screen.

If a channel is selected with a weak digital signal,

“Digital channel signal strength is low” will be displayed on the screen.

The same program may be available on either an analog channel or a digital channel. You may choose to watch either format.

If a channel is selected to which you have not displayed on the screen.

VHF/UHF/CABLE CHANNELS

Air

VHF

2-13

UHF

14-69

Cable

VHF

2-13

STD/HRC/IRC

14-36 (A)

37-59 (AA)

60-85 (AAA)

86-94 (86)

(A-1)

100-135 (100)

01 (4A)

(94)

95-99 (A-5)

(135)

NOTE:

If a channel with no broadcast is selected, the sound will automatically be muted.

It may take a few seconds for a digital channel picture to appear on screen after being selected.

To select the video input source

To view a signal from another device connected to your LCD TV, such as a VCR player, press INPUT

SELECT, then press ▲/▼ or corresponding Number

buttons (0-7), then press ENTER. You can select

TV, Video1, Video2, Component, HDMI1, HDMI2, PC or DVD depending on which input jacks you used to connect your devices.

Input Select

0.TV

1.Video1

2.Video2

3.Component

4.HDMI1

5.HDMI2

6.PC

7.DVD

[0-7]:Select

CH /

Press and release CH / . The channel automatically stops at the next channel set into memory.

For proper operation, before selecting channels, they should be set into the memory. See “Memorizing channels” on page 20.

DISPLAY

Press DISPLAY to display the current information on the screen.

17

18

When the TV receives a digital signal, the digital information will appear.

62-1 HDTV

CH-1

Digital

TV-MA

Air

No Program Information is available

Sleep Timer

Off

English

Full

1080i

Channel number

Channel label (if preset)

V-Chip rating

Sleep timer

Program guide

Resolution

Station name

Broadcast program name

Signal type

Audio language

Picture size

When the TV receives an analog signal, the analog information will appear.

14

X

Analog Cable

Sleep Timer

Off

Mono

Full

480i

• Channel number

V-Chip rating

Sleep timer

Audio information

(Stereo, SAP or Mono)

• Channel label (if preset)

Signal type

Picture size

Resolution

Broadcast program name

Press DISPLAY again to clear the call display.

NOTE:

After a few seconds, DISPLAY screen will return to normal TV-operation automatically.

RECALL

This button allows you to go back to the last channel selected by pressing RECALL. Press RECALL again to return to the last channel you were watching.

MUTE

Press MUTE to switch off the sound. The TV’s sound will be silenced and “Mute” will appear on the screen.

The sound can be switched back on by pressing this button again or the VOL + or.

SLEEP

To set the TV to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each press of the SLEEP button (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press

SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to Off.

Quick guide for menu operation

Call menu and for example: Select Language.

1

Press INPUT SELECT to select TV mode.

2

Press SETUP/TV MENU. The TV menu screen will appear.

Main Menu

Picture

Audio

Channel

Lock

Setup

>>

: Select ENTER:Set 3

Press ▲ or ▼ to select “Setup”, then press ▶ or

ENTER.

4

Press ▲ or ▼ to select “Language”, then press

◀/▶ to select the desired language.

…on the following pages the menu can be called in the same way as here.

5

Press EXIT to return to the normal screen.

NOTE:

If no buttons are pressed for more than about 60 seconds, the menu screen will return to normal operation automatically.

Convenience functions

You can change the default settings by pressing the Menu button on your remote, then select the one of the icons at the top of the menu - follow the On-Screen prompts to set your preferences.

Icon

Picture Picture

Setting

Dynamic

Gamma

Picture

Preference

Selected Items

Brightness / Contrast

/ Sharpness / Color

/ Tint

Setup hint

You can adjust the picture quality to your preference.

Color Temperature Bluish (Cool) / Neutral (Standard) / Reddish (Warm)

Backlight* 2 The Backlight feature adjusts the screen brightness for improved picture clarity.

On/Off The Dynamic Gamma feature produces greater picture detail in dark or bright scene areas.

Sports

Standard

Bright and dynamic picture (factory-set)

Standard picture quality (factory-set)

Picture Size

Film Mode

Movie

Memory

On/Off

Movie-like picture setting (factory-set)

Your personal preferences (set by you; see “Picture Setting”).

See page 24.

A smoother motion may be obtained by setting the Film Mode to “On” or HDMI input.

PC Setting

DNR

Clock

Phase

Auto Adjust

On/Off

To minimize any vertical bars or stripes visible on the screen background.

This must be adjusted after the frequency has been set optimize picture quality.

To adjust the all PC settings automatically.

DNR (Digital Noise Reduction) can reduce the roughness of the picture.

Audio Bass / Treble / Balance

MTS

You can adjust the sound quality to your preference.

Stereo / SAP / Mono The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language or other audio information.

“SAP” displays on-screen every time you press DISPLAY.

Surround On/Off

Audio Language

The dynamic presence and sound created offers a thoroughly enjoyable listening experience.

When two or more audio languages are included in a digital signal, you can select one of the audio languages. (This function is available only for digital broadcast.)

HDMI1 Audio HDMI

DVI

When you connect the HDMI device to the TV, select this setting.

When you connect the DVI device to the TV with analog audio cords, select this setting.

Speakers

Channel Add / Delete

DTV Signal

Auto Ch Memory

Ch Label

On/Off

Lock

Setup Closed Caption

Language

Video Label

On Timer Off / 0h30m / 1h00m

/ 1h30m / 2h00m

/ 3h00m⋅⋅⋅12h00m

Auto Shut Off* 1 On/Off

Use this feature to turn the TV speakers off when you connect an audio system.

See page 20.

See page 21.

See page 20.

See page 21.

See page 22.

See page 23.

You can choose from three different languages (English, Français (French) and Español (Spanish)) for the on-screen displays.

Select the language you prefer first, then proceed with the other menu options.

See page 21.

You can set the On Timer to automatically turn on the TV. To cancel the On

Timer select “Off”.

Auto Setup

Reset* 2

If the Auto Shut Off feature is On, a station being viewed stops broadcasting and the TV is not operated, the TV will automatically shut itself off after 15 minutes.

See page 15.

“Picture Size”, “MTS”, “Audio Language”, “HDMI1 Audio” and “Speakers” cannot be reset by this function.

*

*

NOTE:

1 If there is no input signal in the HDMI or PC mode, after 1 minute Auto Shut Off will be activated.

2 The device may not conform to the Energy Star 4.0 standard after Reset is performed or the Backlight is adjusted.

19

Memorizing channels

This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the

TV’s memory. To use this TV with an antenna, set the Signal Type option to the Air mode. When shipped from the factory, this menu option is in the Cable mode.

Air/Cable selection

1

Select “Channel”, then press ▶ or ENTER.

2

Press ▲ or ▼ to select “Auto Ch Memory”, then press ▶ or ENTER.

3

Press ▲ or ▼ to select “Signal Type”.

4

Press ◀ or ▶ to select “Air” or “Cable”.

Air - VHF/UHF channels

Cable - CABLE TV channels

Auto Ch Memory

Signal Type

Automatic Search

Cable

Start

: Select : Adjust

CABLE CHART

The chart below is typical of many cable system channel allocations.

4

The TV will begin memorizing all the channels

• available in your area.

It may take from 15 minutes to 30 minutes to complete memorizing digital cable channels.

Depending on the reception condition, a bar display may not advance for several minutes, please be patient.

NOTE:

• Memorizing channels is best accomplished during evening “PRIMETIME” hours, as more stations are broadcasting digital signals. Memorizing channels can only be accomplished while a station is broadcasting a digital signal to set that channel into memory.

If you are unsure of the digital channels available in your area, you may visit www.antennaweb.org to receive a list based on your address or zip code.

Should you require further assistance you may call our toll-free customer service line at 1-800-877-5032.

New digital channels may be added to your area periodically, it is recommended to perform the

“Automatic Search” procedure regularly.

Adding Channel

If you find a new digital channel unregistered, you can add the new channel into the channel memory.

1

Tune in the new channel.

2

Select “Channel”, then press ▶ or ENTER.

3

Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER.

Add/Delete

Adding Channel

Add/Delete

Clear All

>>

>>

>>

20

NOTE:

It may take a few seconds for a digital channel picture to appear on screen after being selected.

Automatic Search

1

Select “Channel”, then press ▶ or ENTER.

2

Press ▲ or ▼ to select “Auto Ch Memory”, then press ▶ or ENTER.

3

Press ▲ or ▼ to select “Automatic Search”, then press ▶ or ENTER.

Auto Ch Memory

Signal Type

Automatic Search

Cable

Stop

Analog Channel Found : 7

Digital Channel Found : 5

Programming Now

: Select ENTER:Cancel

: Select ENTER:Set 4

Press ▲ or ▼ to select “Adding Channel”, then press ▶ or ENTER. The new channel will be added into the channel memory.

Add/Delete channel

You can select the channel that you want to skip.

1

Select “Channel”, then press ▶ or ENTER.

2

Press ▲ or ▼ to select “Add/Delete”, then press

▶ or ENTER.

3

Press ▲ or ▼ to select “Add/Delete”, then press

▶ or ENTER.

4

Press ▲ or ▼ to select the channel that you want to skip.

Add/Delete

CH

2

3

3-1

3-2

4

Signal

Analog

Analog

Digital

Digital

Analog

Add

Add

Delete

Add

Delete

: Select : Adjust 5

Press ◀ or ▶ to select “Add” or “Delete”, whichever function you want to perform.

6

Repeat steps 4 - 5 for other channels you want to add or delete.

Clear All

All channels are deleted from the channel memory.

1

Select “Channel”, then press ▶ or ENTER.

2

Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER.

3

Press ▲ or ▼ to select “Clear All”, then press ▶ or

ENTER.

Add/Delete

Adding Channel

Add/Delete

Clear All

>>

>>

>>

: Select

Checking the digitalsignal strength

This TV will allow you to view the digital signal meter for digital channels.

1

Select “Channel”, then press ▶ or ENTER.

2

Press ▲ or ▼ to select “DTV Signal”.

3

Press ▶ or ENTER to check the Digital-signal strength. The Digital-Signal strength screen will appear. If necessary, adjust the direction of the antenna to obtain the maximum signal strength.

DTV Signal

Signal Level

ENTER:Set

NOTE:

Signal meter feature is not available for analog channels.

After 240 seconds, DTV Signal screen will return to normal TV-operation automatically.

Labeling channels

Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.

You can choose any four characters to identify a channel.

To create channel labels

1

Select “Channel”, then press ▶ or ENTER.

2

Press ▲ or ▼ to select “Ch Label”, then press ▶ or ENTER.

The “Ch Label” menu will appear.

3

Press ◀ or ▶ to select a channel you want to label, then press ▼.

Ch Label

Channel Number

Ch Label

Label Clear

15-1

CH-1

>>

4

Press ◀ or ▶ repeatedly until the character you want appears in the first space.

Ch Label

Channel Number

Ch Label

Label Clear

15-1

A

>>

: Select : Adjust ENTER:Set

The characters rotation as follows:

- , () @ / + = -

SPACE

If the character which you desire appears, press

ENTER.

Repeat this step to enter the rest of the characters.

If you would like a blank space in the label name, you must choose the empty space from the list of characters.

5

Repeat steps 3-4 for other channel. You can assign a label to each channel.

6

When you finish inputting the label name, press

EXIT to return to the normal screen.

To clear a Ch Label

After step 3 above, press ▲ or ▼ to select “Label

Clear”, then press ▶ or ENTER.

NOTE:

The channel labels will be reset after “Automatic

Search” on page 20.

Labeling video inputs

The Video Label feature allows you to label each input source for your TV.

1

Select “Setup”, then press ▶ or ENTER.

Press ▲ or ▼ to select “Video Label”, then press

▶ or ENTER.

3

Press ▲ or ▼ to select an input which you want to label.

4

Press ◀ or ▶ to select the desired label for that input source.

Video Label

Video1

Video2

Component

HDMI1

HDMI2

-

-

-

-

-

: Adjust

: Select

– : Uses the default label name

VCR : Video cassette recorder

DVD : DVD video

DTV : Digital TV set-top box

SAT :

CBL : Cable box

HD box

: HDMI device (only for HDMI inputs)

: Select : Adjust 21

22

Setting the V-Chip

An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV

Rating” and “Movie Rating” if this data is transmitted.

You may set this restriction separately. To use the

V-Chip function, you must register a password.

To register a password

1

Select “Lock”, then press ▶ or ENTER.

2

Select and enter your password (4 digits) using

Number buttons (0-9), then press ENTER.

Lock

New Password

* * *_

[0-9] : Select ENTER:Set

“ ” appears instead of the number.

3

Enter the same password again to confirm, then press ENTER.

The password is now registered.

NOTE:

If you forget the password, contact Customer

Service at 1-800-877-5032 for assistance.

Your original remote control will be required.

To avoid forgetting the password, write it down and keep in a safe place.

To set the V-Chip

1

Select “Lock” menu, then press ▶ or ENTER.

2

Use Number buttons (0-9) to enter your password, then press ENTER. Then Lock menu will appear.

3

Press ◀ or ▶ to set “V-Chip” to “On” .

4

Press ▲ or ▼ to select “V-Chip Set”, then press

▶ or ENTER.

The V-Chip Set Menu appears.

5

Press ▲ or ▼ to select which rating will be used, then press ▶ or ENTER. Each rating below will appear.

TV Rating

TV Rating

ALL D

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

: Select

L S V FV

ENTER:Set

You can set the rating using age level and genre.

Age:

TV-Y : All children

TV-Y7 : 7 years old and above

TV-G : General audience

TV-PG : Parental guidance

TV-14 : 14 years old and above

TV-MA : 17 years old and above

Genre:

ALL : All

Dialogue

L :

S :

Violence

Violence

Movie Rating

Movie Rating

G

PG

PG-13

R

NC-17

X

: Select ENTER:Set

G : All ages

PG : Parental guidance

PG-13 : Parental guidance less than 13 years old

R : Under 17 years old parental guidance

suggested

NC-17 : 17 years old and above

X : Adult only

6

Press ▲/▼/◀/▶ to select the desired rating, then press ENTER.

7

Press EXIT to return to the normal screen.

V-Chip function is activated now.

To use the TV after the TV is protected.

When a program is received that is blocked by the V-

Chip, press MUTE, then enter your password.

The protection will be temporarily overridden. If the

TV is turned off or the channel is changed, the V-Chip restriction will be reactivated.

NOTE:

The V-Chip function is activated only on programs and input sources that include a rating signal.

To change the password

1

Select “Lock”, then press ▶ or ENTER.

2

Use Number buttons (0-9) to enter your password, then press ENTER. The Lock menu will appear.

3

Press ▲ or ▼ to select “Change Password”, then press ▶ or ENTER.

The Change Password screen will appear.

4

Enter a new password using Number buttons

(0-9), then press ENTER.

5

Enter the same password again to confirm, then press ENTER.

The password is now registered.

Downloading the additional V-Chip rating system

As a supplement to the standard V-Chip rating system, your television will be able to download an additional rating system, if such a system becomes available in the future.

To download the additional V-Chip rating system

(when available)

1

Select “Lock”, then press ▶ or ENTER.

Use Number buttons (0-9) to enter your password, then press ENTER. The Lock menu will appear.

3

Press ◀ or ▶ to set “V-Chip” to “On”.

Press ▲ or ▼ to select “V-Chip Set (DTV)”, then press ▶ or ENTER.

5

If the TV is not storing the additional rating system, the TV will begin downloading it, which may take some time to be completed.

6

Set your preferred content rating limits for the additional rating system.

7

You also need “Update” procedure to update rating information.

NOTE:

You can only download the additional V-Chip rating system when your TV is receiving a digital signal.

When you download the additional rating system, it may take some time for the download to occur.

The V-Chip rating information and system are not determined or controlled by the TV.

The standard V-Chip rating system is available whether your TV is receiving a digital signal or not, and will block both analog and digital programs. To set the restriction level using the standard V-Chip rating system, select V-Chip Set in step 4.

The downloadable V-Chip rating system is an evolving technology, and availability, content, and format may vary.

You cannot select this feature if the TV is not receiving a digital signal for the current station.

To clear the all V-Chip settings

1

Select “Lock”, then press ▶ or ENTER.

2

Use Number buttons (0-9) to enter your password, then press ENTER. The Lock menu will appear.

3

Press ▲ or ▼ to select “V-Chip Clear”, then press

▶ or ENTER.

The “V-Chip Clear” screen will appear.

4

Use Number buttons (0-9) to enter your password, then press ENTER. All your settings return to the factory settings.

Closed Caption

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed Captioned television programs. Closed

Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.

Captions: This Closed Caption Mode will display text on the screen in English or another language.

Generally, Closed Captions in English are transmitted on C1 and Closed Captions in other languages are transmitted on C2.

Text: The Text Closed Caption Mode will usually fill

1/2 of the screen with a programming schedule or other information.

1

Select “Setup”, then press ▶ or ENTER.

2

Press ▲ or ▼ to select “Closed Caption”, then press ▶ or ENTER.

The Closed Caption menu will appear.

3

Press ◀ or ▶ to set “CC Setting” to “On”.

On: Captions will be displayed on the screen.

Off: Captions will not be displayed on the screen.

4

Press ▲ or ▼ to select “Analog Caption” or “Digital

Caption”.

When you select “Analog Caption”, you can choose from C1, C2, C3, C4, T1, T2, T3 and T4.

When you select “Digital Caption”, you can choose from CS1, CS2, CS3, CS4, CS5 and CS6.

5

Press ◀ or ▶ to select the desired Closed

Caption mode for both Digital and Analog Caption.

6

Press ▲ or ▼ to select “CC Priority”, then press

◀ or ▶ to select “Digital CC” or “Analog CC”.

NOTE:

Depending on the broadcast signal, some

Analog Captions will function with a Digital broadcast signal. This step prevents two types of captions from overlapping.

NOTE:

If the program or video you selected is not closedcaptioned, no captions will display on-screen.

If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, set the CC Setting to “Off”.

When selecting Closed Captions, the captioning will be delayed approx. 10 seconds.

If no caption signal is received, no captions will appear, but the television will remain in the Caption

Mode.

Misspellings or unusual characters may occasionally appear during Closed Captioning.

This is normal with Closed Captioning, especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing.

When Captions are being displayed, on-screen displays, such as volume and mute may be seen but may interfere with Closed Captions.

Some cable systems and copy protection systems may interfere with the Closed Captioned signal.

If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.

CC advanced

When you have selected Custom as the display method, you can adjust the various setting listed below as follows:

This feature is designed to customize Digital Captions only.

1

Select “Setup”, then press ▶ or ENTER.

2

Press ▲ or ▼ to select “Closed Caption”, then press ▶ or ENTER.

The Closed Caption menu will appear.

3

Press ◀ or ▶ to set “CC Setting” to “On”.

23

4

Press ▲ or ▼ to select “Digital CC Preset”, then press ◀ or ▶ to select “Custom”.

5

Press ▲ or ▼ to select “CC Advanced”, then press ▶ or ENTER.

The CC Advanced menu will appear.

6

Press ▲ or ▼ to select the desired item, then press ◀ or ▶ to change the setting.

CC Advanced

Text Size

Text Type

Text Edge

Text Color

Text Opacity

Auto

Auto

Auto

Auto

Auto

Background Color

Background Opacity

: Select

: Adjust

Auto

Auto

You can select from among the following items and parameters.

Text Size: Auto, Small, Standard, Large

Text Type: Auto, Style1, Style2, Style3, Style4,

Style5, Style6, Style7

Text Edge: Auto, None, Raised, Depressed,

Uniform, Left Shadow, Right

Shadow

Text Color: Auto, Black, White, Red, Green,

Blue, Yellow, Magenta, Cyan

Text Opacity: Auto, Solid, Transparent,

Translucent, Flashing

Background

Color:

Background

Opacity:

Auto, Black, White, Red, Green,

Blue, Yellow, Magenta, Cyan

Auto, Solid, Transparent,

Translucent, Flashing

NOTE:

You cannot set both “Text Color” and “Background

Color” as a same color.

You cannot set both “Text Opacity” and “Background

Opacity” to “Transparent”.

Setting the picture size

You can view 480i and 480p format programs in a variety of picture sizes— Natural, Cinema Wide1,

Cinema Wide2, Cinema Wide3, Full and Native.

Selecting the picture size

1

Select “Picture”, then press ▶ or ENTER.

2

Press ▲ or ▼ to select “Picture Size”, then press

▶ or ENTER to display Picture Size menu. Press

▲/▼ or corresponding Number buttons (0-4) to select the desired picture size, as described below.

Picture Size

0.Natural

1.Cinema Wide1

2.Cinema Wide2

3.Cinema Wide3

4.Full

24

[0-4]:Select

NOTE:

Selectable picture sizes may vary depending on the input source or broadcast signal.

Picture Size menu also can be displayed by pressing PICTURE SIZE on the remote control.

Natural

In some cases, this image will display the size of standard 4:3 with a black side bar.

Cinema Wide1 (for 4:3 format programs)

To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio.

The top and bottom edges of the picture may be hidden.

Cinema Wide2 (for letter box programs)

The entire picture is uniformly enlarged—it is stretched the same amount both wider and taller

(retains its original proportion).

The top and bottom edges of the picture may be hidden.

Cinema Wide3 (for letter box programs with subtitles)

To fill the width of the screen, it is extended horizontally. However; it is only slightly extended at the top and the bottom.

The top and bottom edges of the picture may be hidden.

A B C D E F G - - - - - - - - - - - - - - - -

A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -

Full (for 16:9 source programs)

Full will display the picture at the maximum size.

Native (for PC mode only)

Detects the resolution of the signal of the image and it will be shown on the screen with same amount of pixels.

NOTE:

Some High Definition and/or Digital broadcasts may not allow you to change the picture size.

In HDMI or COMPONENT mode with a scanning rate of 720p, 1080i or 1080p (only HDMI) only the Cinema

Wide2 and Full picture size feature is available.

In PC Mode, only the Natural, Full and Native picture size features are available. In PC Mode (WXGA), only the Full and Native picture size features are available.

Preparation

The following pages describe the setup/ operation in DVD mode.

Preparation

Before DVD/CD operation, please make the following preparations.

1

Insert the AC cord plug into a standard 120V

60Hz polarized AC outlet.

If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing

POWER.

NOTE:

When connecting to other equipment, unplug the unit from the AC outlet.

2

Press POWER on the unit or on the remote

• control to turn on the unit. The POWER indicator will change to green.

Each time you turn the unit ON, the TV/DVD starts from the TV mode.

When using an amplifier, switch on the amplifier.

3

Press TV/DVD to select DVD mode.

The DVD startup screen will appear on the screen.

NOTE:

If the unit does not operate properly:

Static electricity, etc., may affect the player’s operation. Disconnect the AC power cord once, then connect it again.

About inserting disc:

If the unit is slanted or moved while inserting disc, the disc may get damage.

Status display of disc

Press DISPLAY. The status display of the disc will appear on the screen

• Display messages may change at every time when you press DISPLAY for some discs or files.

To make the status display screen disappear, press

DISPLAY again.

Playback procedure

1

Press TV/DVD to select DVD mode.

2

Place the disc in the disc slot with the label side facing forward. (If the disc has a label.)

Hold the disc without touching either of its surfaces, align it with the guides, and place it in position.

3

On the screen, “ ” changes to “Loading” and then

• playback will commence.

A menu screen may appear on the TV screen, if the disc has a menu feature. In this case, press ▲, ▼, ◀, ▶ or ENTER to operate a menu feature.

4

Press STOP to end playback.

The unit can record where you stop a video, but it depends on a disc you are using. Press PLAY to resume a playback point. The unit can store a memory of stopped point of last five discs that you have played. When one of these discs is next loaded, you can resume playback from where you stopped playing last time.

If you press STOP again (“Resume off” appears on the screen) the unit will clear the stopped point.

You cannot save a stopped point for some discs. If a number of discs played and stored in the unit exceeds five, a new memory will overwrite the old stored memory.

5

Press

Remove the disc and then press POWER.

The unit turns off.

When you eject the disc, you may hear mechanism noise, but it is not malfunction.

NOTE:

If a non-compatible disc is loaded, “Can’t play disc” or “Incompatible disc region number Can’t play disc” will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (see pages 10 and 32).

Some discs may take a minute or so to start playback.

If an 8 cm disc is placed into the disc slot and picture playback or menu display does not begin automatically, press PLAY.

A prohibition message “Depending on the disc, this operation may be prohibited” or “This operation can’t be performed” may appear at the screen. This message means either the feature you tried is not available on the disc, or the unit cannot access the feature at this time. This does not indicate a problem with the unit.

When you set a single-faced disc label downwards

(i.e. the wrong way up) “Loading” will appear on the display and then “Can’t play disc” will be displayed.

Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc content recorded, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

25

26

Special playback

Fast Forward Playback

Press SEARCH (XX) during normal playback.

Each press of SEARCH (XX) will increase the speed of the search.

• To resume normal playback, press PLAY.

Review Playback

Press SEARCH (WW) during normal playback.

Each press of SEARCH (WW) will increase the speed of the search.

• To resume normal playback, press PLAY.

Still Playback

Press PAUSE during normal playback to pause playback.

• To resume normal playback, press PLAY or

PAUSE.

Frame Advance

Press PAUSE during still playback.

One frame is advanced each time you press SEARCH

(WW) or SEARCH (XX).

• To resume normal playback, press PLAY.

Slow-motion Playback

Press SLOW ( ) or SLOW ( ) during normal playback or still playback.

Each press of SLOW will change the speed of the slow.

• To resume normal playback, press PLAY.

• To resume the still playback, press PAUSE.

Locating a chapter or track

Press SKIP( ) Forward or SKIP( ) Reverse during playback to locate a chapter that you want to watch.

Each time you press the button, a chapter or track is skipped.

NOTE:

The TV/DVD is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent damage to your television screen.

Zooming

This TV/DVD will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

1

Press ZOOM during playback.

The center part of the image will be zoomed in.

Each press of ZOOM will change the ZOOM magnification Zoom 2× and Zoom 4×.

2

Press ▲/▼/◀/▶ to view a different part of the frame.

You may move the frame from the center position

UP, DOWN, LEFT or RIGHT.

3

In the zoom mode press ZOOM repeatedly to return to a 1:1 view.

NOTE:

You can select the Still Playback or Fast Forward

(Review) Playback in the zoom mode.

Some discs may not respond to zoom feature.

Locating desired scene

Use the title, chapter and time recorded on the disc to locate the desired point to play back.

1

Press JUMP during playback.

2

Press ▲/▼ to select the “Title Search”, “Chapter

Search” or “Time Search”. Then press ▶ or

ENTER.

3

Press Number buttons (0–9) to input the number.

• If you input a wrong number, press CANCEL.

Refer to the package supplied with the disc to check the numbers.

4

Press ENTER.

• Playback starts.

When you change the title, playback starts from

Chapter 1 of the selected title.

Some discs may not work in the above operation.

A-B Repeat playback

A-B repeat playback allows you to repeat material between two selected points.

1

Press REPEAT A-B during playback.

The start point is selected.

2

Press REPEAT A-B again.

The end point is selected.

Playback starts at the point that you selected.

Playback stops at the end point, returns to Point A automatically, then starts again.

• To resume normal playback press REPEAT A-B again.

NOTE:

In A-B Repeat mode, subtitles near the A or B locations may not be displayed.

You may not be able to set A-B Repeat during certain scenes of the DVD.

A-B Repeat does not work with an interactive DVD,

MP3/WMA/JPEG-CD.

Marking desired scenes

The TV/DVD stores the points that you want to watch again up to 12 points.

You can resume playback from each scene.

Marking the scenes

1

Press MARKER during playback.

2

Select the blank Marker using ▲/▼/◀/▶, then press ENTER at the desired scene.

• Up to 12 scenes can be selected.

• Repeat this procedure to set the other 11 scenes.

3

Press MARKER to return to the normal screen.

Returning to the scenes

1

Press MARKER during playback or stop mode.

2

Press ▲/▼/◀/▶ to select the Marker 1-12.

3

Press ENTER.

Playback starts from the marked scene.

To cancel the Marker

Follow the above steps 1~2, then press CANCEL.

NOTE:

Some discs may not work with the marking operation.

The marking is cancelled when you eject the disc or turn the power off.

Some subtitles recorded around the marker may fail to appear.

Changing angles

When playing back a disc recorded with multi-angle facility, you can change the view angle.

1

Press ANGLE during playback.

The current angle will appear.

Current/Total

Angle 1/2

Changing soundtrack language

You can select the language when you play a multilingual disc.

1

Press AUDIO during playback.

The current soundtrack language will appear.

Current/Total

Audio 1/2 English Dolby Digital 2/0CH

2

Press AUDIO repeatedly until the desired language is selected.

The on-screen display will disappear after a few seconds.

Current/Total

Audio 2/2 French Dolby Digital 2/0CH

NOTE:

If the desired language is not heard after pressing

AUDIO several times, the language is not recorded on the disc.

Changing soundtrack language is cancelled when you eject the disc.

The initial default language or available language will be heard if the disc is played back again.

Subtitles

Changing the subtitle language

You can select the language when playing back a disc recorded with multilingual subtitles.

1

Press SUBTITLE repeatedly during playback until your desired language appears.

The on-screen display will disappear after a few seconds.

Current/Total

Subtitle 1/2 English

2

Press ANGLE repeatedly until the desired angle is selected.

Turning the subtitles off

Press SUBTITLE during playback until “Off” appears.

NOTE:

In case of JPEG-playback, the JPEG-image is rotated 90 degrees to the right.

Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD.

• Changing subtitle language is cancelled when you eject the disc.

• Some functions may not work on some DVDs. You may not be able to turn subtitles on or off or change subtitles.

While playing the DVD, the subtitle may change when:

- you eject or insert the disc.

- you change the title.

• In some cases, the subtitle language is not changed to the selected one immediately.

27

28

Using HOME MENU

Playing a disc

1

Press SETUP during stop mode.

HOME MENU will appear.

2

Press ▲/▼/◀/▶ to select “Disc

Navigator”, then press ENTER .

Audio Settings

Play Mode

HOME MENU

DVD

Initial Settings

Video Adjust

Disc Navigator

3

Press ▲/▼ to select desired option, then press ENTER.

Disc Navigator

Title

Chapter

• Some discs may not work Disc Navigator.

Depending on a disc, you can select Title,

Chapter, or both.

4

Press ▲/▼/◀/▶ or Number Buttons (0–9) to

• select Title or Chapter, then press ENTER.

Press SKIP or to move next/previous page.

Press RETURN to return to HOME MENU screen.

Playing a file

1

Press SETUP during stop mode.

HOME MENU will appear.

2

Press ▲/▼/◀/▶ to select “Disc Navigator”, then press ENTER.

3

Press ▲/▼ to select folder, then press

ENTER.

00:00/ 00:00 0kbps

Folder1

Folder2

Folder3

Folder4

4

Press ▲/▼ to select file, then press ENTER.

• If you select JPEG file, unit shows the pictures one after another automatically.

Press RETURN to clear HOME MENU screen.

Press SETUP to go to previous step.

NOTE:

When music files and JPEG files are recorded in one disc, you can play simultaneously. Please select the music file then select the JPEG file.

Play mode

A-B repeat playback

A-B repeat playback allows you to repeat selection between two selected points.

1

Press PLAY MODE

Play Mode during playback.

Play Mode screen will appear.

A-B Repeat

Repeat

Random

Program

A(Start Point)

B(End Point)

Off

Search Mode

2

Press ▲/▼ to select “A-B Repeat”, then press ▶ or

ENTER.

3

Press ▲/▼ to select “A(Start Point)”, then press

ENTER. The start point is selected.

4

Press ▲/▼ to select “B(End Point)”, then press

ENTER.

The end point is selected. Playback starts at the point that you selected. Playback stops at the end point and returns to Point A automatically, then starts again.

To resume normal playback

Select “Off” in step 3.

NOTE:

Some discs may not work Play mode function.

A-B Repeat playback does not work with MP3/WMA

CD.

Repeat playback

1

Press PLAY MODE during playback.

Play Mode screen will appear.

2

Press ▲/▼ to select “Repeat”, then press ▶ or

ENTER.

3

Press ▲/▼ to select desired repeat option, then press ENTER.

The unit automatically starts repeat playback after finishing the current title or chapter.

To resume normal playback

Select “Repeat Off” in step 3.

Random playback

1

Press PLAY MODE during playback or stop mode.

Play Mode screen will appear.

2

Press ▲/▼ to select “Random”, then press ▶ or

ENTER.

3

Press ▲/▼ to select desired random playback option, then press ENTER.

The unit automatically starts random playback.

To resume normal playback

Select “Random Off” in step 3.

NOTE:

You cannot play Random for programmed contents

(Random play is not permitted during Program playback).

During Random playback, it may repeat the same title, chapter or track.

In stop mode, you can also enter Play Mode screen by selecting “Play Mode” in HOME MENU.

Random playback does not work with MP3/WMA CD.

Program playback

1

Press PLAY MODE during playback or stop mode.

Play Mode screen will appear.

2

Press ▲/▼ to select “Program”, then press or

ENTER.

3

Press ▲/▼ to select

Program Current Title:02 Chapter:001 “Create/Edit”, then press ENTER.

“Create/Edit” display differs, depending on discs or files.

Program Step

01. 01

02.

03.

04.

05.

06.

07.

08.

Title 1-38

Title 01

Title 02

Title 03

Title 04

Title 05

Title 06

Title 07

Title 08

Chapter 1-004

Chapter 001

Chapter 002

Chapter 003

Chapter 004

4

Press ▲/▼/◀/▶ to select Title, Chapter, Track or

File, then press ENTER.

When you add a program, find where you want to add it (Program Step) and select Title,

Chapter or Track then press ENTER. (It will be added to the left if File is added.)

To go to previous step, press RETURN.

If RETURN is pressed while programming, the content will be deleted.

To delete a program, select Program Step that you want to delete and press CANCEL.

5

Press PLAY ( ).

• To play existing programmed contents, select

“Playback Start” from Play Mode screen and press ENTER.

To resume normal playback, select “Playback

Stop” in Play Mode screen and press ENTER.

Your programmed contents are saved.

To delete all programmed contents, select

“Program Delete” in Play Mode screen and press ENTER.

NOTE:

You can repeat the programmed contents. Select

“Program Repeat” from “Repeat” in the Play Mode screen during Program playback.

You cannot play Random for programmed contents (Random play is not permitted during

Program playback).

In stop mode, you can also enter Play Mode screen by selecting “Play Mode” in HOME MENU.

Locating desired scene

1

Press PLAY MODE during playback or stop mode.

Play Mode screen will appear.

2

Press ▲/▼ to select “Search Mode”, then press ▶ or ENTER.

3

Press ▲/▼ to select desired search mode option,

• then press ▶ or ENTER.

Search Mode options differs, depending on discs or files.

4

Input Title, Chapter,

Play Mode

Track or Folder number or Time by using

Number buttons

(0–9) and press

ENTER.

A-B Repeat

Repeat

Random

Program

Search Mode

Title Search

Chapter Search

Time Search

Input Chapter

0 0 1

• For instance, if you want to enter 1hr 4min

(64:00), input 6, 4, 0, 0.

NOTE:

You can locate desired scene in Menu screen for some DVD video.

In stop mode, you can also enter Play Mode screen by selecting “Play Mode” in HOME

MENU.

Audio Settings menu

The Audio Settings menu offers features for adjusting the way discs sound.

1

Press SETUP during stop mode.

HOME MENU will appear.

2

Press ▲/▼/◀

/▶ to select “Audio

Settings”, then press

ENTER.

Play Mode

HOME MENU

DVD

Audio Settings

Initial Settings

Video Adjust

Disc Navigator

3

Press ▲/▼/◀/▶ to setting the option, then press ENTER.

Audio Settings

Equalizer

Audio DRC

Dialog

Off

Rock

Pop

Live

Dance

Techno

Classic

Soft

4

Press SETUP to save the setting.

Equalizer

Select the most suitable setting to match a category of music that you are listening to.

Audio DRC

Loud sound level goes down and quiet sound level goes up while playing. This is useful, for instance, when you watch a film in the late night.

It only works with Dolby Digital Sound.

The effect depends on your AV amplifier and speakers volume. Adjust the sound as you wish and find the most effective setting.

Dialog

Adjust setting when you cannot hear dialogs very well.

NOTE:

It may not be very effective for some discs or files.

30

Video Adjust menu

From the Video Adjust menu you can adjust various settings that affect how the picture is presented.

1

Press SETUP during stop mode.

HOME MENU will appear.

2

Press ▲/▼/◀/▶ to select “Video Adjust”, then press ENTER.

Audio Settings Video Adjust

Play Mode Disc Navigator

3

Press ▲/▼/◀/▶ to setting the option, then press ENTER.

Initial Settings

Video Adjust

Sharpness

Brightness

Contrast

Gamma

Hue

Chroma Level

Fine

Standard

Soft

4

Press SETUP to save the setting.

Sharpness

Adjust sharpness of images.

Brightness

Adjust brightness of images.

Contrast

Adjust a ratio of brightness between the brightest part and the darkest part.

Gamma

Emphasize dark part of images.

Hue

Adjust a balance between green and red.

Chroma Level

Adjust color density. It is effective with animation or something with high color density.

NOTE:

It may not be very effective for some discs or files.

Quick guide for DVD menu operation

You can change the default settings to customize performance to your preference.

Setting procedure

1

Press SETUP in stop mode.

HOME MENU will appear.

2

Press ▲/▼/◀/▶ to select “Initial Settings”, then press ENTER.

Audio Settings

Play Mode

HOME MENU

DVD

Video Adjust

Disc Navigator

Initial Settings

3

Press ▲/▼/◀/▶ to select the desired option, then press ENTER.

4

Change the selection using ▲/▼/◀/▶ or ENTER,

• by referring to the corresponding page 31.

Repeat steps 3 and 4 to change other option.

5

To clear HOME MENU screen, press SETUP.

Function Setup

Setting Option

Digital Audio Out settings

Digital Out

Dolby Digital Out

DTS Out

96kHz PCM Out

On

Off

Dolby Digital

Dolby Digital > PCM

DTS

MPEG Out

96kHz

MPEG

MPEG > PCM

96 kHz digital audio is output as is at 96 kHz.

MPEG encoded digital audio is output as is.

MPEG encoded digital audio is converted to PCM audio for digital output.

Video Output settings

TV Screen 4:3 (Letter Box)

4:3 (Pan & Scan)

Set if you have a conventional 4:3 TV. Widescreen movies are shown with black bars top and bottom.

Set if you have a conventional 4:3 TV. Widescreen movies are shown with the sides cropped so that the image fills the screen.

Set if you have a widescreen TV.

16:9 (Wide)

Language settings

Audio Language English/French/Spanish If there is an English, French or Spanish soundtrack on the disc, then it will be played.

Other Language Select to choose a language other than the ones displayed.

(See Language Code List on page 33.)

Subtitle Language English/French/Spanish If there is an English, French or Spanish subtitle on the disc, then it will be displayed.

Other Language Select to choose a language other than the ones displayed. (see

Language Code List on page 33.)

DVD Menu Lang.

Off

96kHz > 48kHz

Digital audio is output from the digital outputs.

No digital audio output.

Dolby Digital encoded digital audio is output when playing a

Dolby Digital DVD disc.

Dolby Digital audio is converted to PCM audio before being output.

DTS encoded digital audio is output when playing a DTS disc.

(Noise will be output if your amplifier/receiver is not compatible with DTS audio.)

No digital audio is output.

96 kHz digital audio is converted to 48 kHz for digital output.

Subtitle Display w/Subtitle Lang.

DVD disc menus will be displayed in the same language as your selected subtitle language, if possible.

English/French/Spanish If there is an English, French or Spanish DVD menu language on the disc, then it will be displayed.

Other Language

On

Select to choose a language other than the ones displayed. (see

Language Code List on page 33.)

Subtitles are displayed according to your selected subtitle language (see above).

Off Subtitles are always off by default when you play a DVD disc

(note that some discs override this setting).

Display settings

Angle Indicator On

Off

A camera icon is displayed on-screen during multi-angle scenes on a DVD disc.

No multi-angle indication is shown.

Options settings

Parental Lock See page 32.

31

32

Parental Control

Some discs are specified as not suitable for children.

Such discs can be limited not to playback with the unit.

How to into the Parental menu

1

Press SETUP in stop mode.

HOME MENU will appear.

2

Press ▲/▼/◀

/▶ to select “Initial

Settings”, then press

ENTER.

Audio Settings

Play Mode

Initial Settings

Video Adjust

Disc Navigator

3

Press ▲/▼ to select “Options”, then press ▶ or

ENTER.

Then press ▶ or ENTER to enter the Parental

Lock menu.

Change Password

1

Press ▲ or ▼ to select “Password

Change”, then press

ENTER.

2

Press Number

buttons (0–9) to input the current password, then press

ENTER.

3

Press Number

buttons (0–9) to input the new password. Press

ENTER. Now your new password has been set. Be sure to remember this number!

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

Parental Lock Password Change

Level Change

Country Code

Parental Lock: Password Change

Password

New Password

Parental Lock: Password Change

Password

New Password

Level Change

1

Press ▲ or ▼ to select

“Level Change”, then press ENTER.

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

Parental Lock Password Change

Level Change

Country Code

2

Press Number

buttons (0–9) to input the current password, then press

ENTER.

3

Press ◀ or ▶ to select from the level

1 to level 8.

The limitation will be more severe as the level number is lower.

Then press ENTER.

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

Parental Lock: Level Change

Password

1 2 3 4 5 6 7 8 Off

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

Parental Lock: Level Change

Password

1 2 3 4 5 6 7 8 Off

Level 1: DVD software for adults cannot be played back.

Level 8: Virtually all DVD software can be played back.

Level Off: The parental control setting does not function.

Country Code

1

Press ▲ or ▼ to select

“Country Code”, then press ENTER.

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

Parental Lock Password Change

Level Change

Country Code

2

Press Number

buttons (0–9) to input the current password, then press

ENTER.

3

Press ▲ or ▼ to select the input mode from “Country Code

List” or “Code”.

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

Parental Lock: Change Country Code

Password

Code Country Code List us 2 1 1 9

Parental Lock: Change Country Code

Password

Code Country Code List us

2 1 1 9

When you selected “Country Code List”: Press

▲ or ▼ to select Country Code, then press

ENTER.

When you selected “Code”: Press ▶ then use the Number buttons (0-9) to enter the 4-digit

Country Code. (see Country/Area Code List on page 33)

NOTE:

Depending on the discs, the unit cannot limit playback.

Some discs may not be encoded with specific rating level information though its disc jacket says “adult.” For those discs, the age restriction will not work.

If you input a wrong number, press ◀, then input correct number.

Language Code List

Language (Language code letter), Language code

Japanese (ja), 1001

English (en), 0514

French (fr), 0618

German (de), 0405

Italian (it), 0920

Spanish (es), 0519

Chinese (zh), 2608

Dutch (nl), 1412

Portuguese (pt), 1620

Swedish (sv), 1922

Russian (ru), 1821

Korean (ko), 1115

Greek (el), 0512

Afar (aa), 0101

Abkhazian (ab), 0102

Afrikaans (af), 0106

Amharic (am), 0113

Arabic (ar), 0118

Assamese (as), 0119

Aymara (ay), 0125

Azerbaijani (az), 0126

Bashkir (ba), 0201

Byelorussian (be), 0205

Bulgarian (bg), 0207

Bihari (bh), 0208

Bislama (bi), 0209

Bengali (bn), 0214

Tibetan (bo), 0215

Breton (br), 0218

Catalan (ca), 0301

Corsican (co), 0315

Czech (cs), 0319

Welsh (cy), 0325

Danish (da), 0401

Bhutani (dz), 0426

Esperanto (eo), 0515

Estonian (et), 0520

Basque (eu), 0521

Persian (fa), 0601

Finnish (fi), 0609

Fiji (fj), 0610

Faroese (fo), 0615

Frisian (fy), 0625

Irish (ga), 0701

Scots-Gaelic (gd), 0704

Galician (gl), 0712

Guarani (gn), 0714

Gujarati (gu), 0721

Hausa (ha), 0801

Hindi (hi), 0809

Croatian (hr), 0818

Hungarian (hu), 0821

Armenian (hy), 0825

Interlingua (ia), 0901

Interlingue (ie), 0905

Inupiak (ik), 0911

Indonesian (in), 0914

Icelandic (is), 0919

Hebrew (iw), 0923

Yiddish (ji), 1009

Javanese (jw), 1023

Georgian (ka), 1101

Kazakh (kk), 1111

Greenlandic (kl), 1112

Cambodian (km), 1113

Kannada (kn), 1114

Kashmiri (ks), 1119

Kurdish (ku), 1121

Kirghiz (ky), 1125

Latin (la), 1201

Lingala (ln), 1214

Laothian (lo), 1215

Lithuanian (lt), 1220

Latvian (lv), 1222

Malagasy (mg), 1307

Maori (mi), 1309

Macedonian (mk), 1311

Malayalam (ml), 1312

Mongolian (mn), 1314

Moldavian (mo), 1315

Marathi (mr), 1318

Malay (ms), 1319

Maltese (mt), 1320

Burmese (my), 1325

Nauru (na), 1401

Nepali (ne), 1405

Norwegian (no), 1415

Occitan (oc), 1503

Oromo (om), 1513

Oriya (or), 1518

Panjabi (pa), 1601

Polish (pl), 1612

Pashto, Pushto (ps), 1619

Quechua (qu), 1721

Rhaeto-Romance (rm), 1813

Kirundi (rn), 1814

Romanian (ro), 1815

Kinyarwanda (rw), 1823

Sanskrit (sa), 1901

Sindhi (sd), 1904

Sangho (sg), 1907

Serbo-Croatian (sh), 1908

Sinhalese (si), 1909

Slovak (sk), 1911

Slovenian (sl), 1912

Samoan (sm), 1913

Shona (sn), 1914

Somali (so), 1915

Albanian (sq), 1917

Serbian (sr), 1918

Siswati (ss), 1919

Sesotho (st), 1920

Sundanese (su), 1921

Swahili (sw), 1923

Tamil (ta), 2001

Telugu (te), 2005

Tajik (tg), 2007

Thai (th), 2008

Tigrinya (ti), 2009

Turkmen (tk), 2011

Tagalog (tl), 2012

Setswana (tn), 2014

Tonga (to), 2015

Turkish (tr), 2018

Tsonga (ts), 2019

Tatar (tt), 2020

Twi (tw), 2023

Ukrainian (uk), 2111

Urdu (ur), 2118

Uzbek (uz), 2126

Vietnamese (vi), 2209

Volapük (vo), 2215

Wolof (wo), 2315

Xhosa (xh), 2408

Yoruba (yo), 2515

Zulu (zu), 2621

Country/Area Code List

Country/Area, Country/Area code, Country/Area code letter

Argentina, 0118, ar

Australia, 0121, au

Austria, 0120, at

Belgium, 0205, be

Brazil, 0218, br

Canada, 0301, ca

Chile, 0312, cl

China, 0314, cn

Denmark, 0411, dk

Finland, 0609, fi

France, 0618, fr

Germany, 0405, de

Hong Kong, 0811, hk

India, 0914, in

Indonesia, 0904, id

Italy, 0920, it

Japan, 1016, jp

Republic of Korea, 1118, kr

Malaysia, 1325, my

Mexico, 1324, mx

Netherlands, 1412, nl

New Zealand, 1426, nz

Norway, 1415, no

Pakistan, 1611, pk

Philippines, 1608, ph

Portugal, 1620, pt

Russian Federation, 1821, ru

Singapore, 1907, sg

Spain, 0519, es

Sweden, 1905, se

Switzerland, 0308, ch

Taiwan, 2023, tw

Thailand, 2008, th

United Kingdom, 0702, gb

USA, 2119, us

33

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.

To connect the LCD TV/DVD to a VCR

Rear of the unit

To Audio/Video OUT

VCR

To VIDEO/AUDIO IN

Audio/Video cord (not supplied)

To connect the LCD TV/DVD to a VCR with an S-Video cord

If you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also connect the audio cables to the AUDIO IN jacks on the rear side of the unit.

The S-Video cable only carries the video signal. The audio signal is separate.

NOTE:

When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable takes precedence.

Rear of the unit

VCR

To Audio OUT

To

S-VIDEO

IN

To AUDIO IN

To S-Video OUT

Audio cord (not supplied)

S-Video cord (not supplied)

To connect to a DVD player with Component Video Input

You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD player with the COMPONENT video cables (not supplied).

Rear of the unit

Component video cord (not supplied)

To COMPONENT IN

To Component OUT

Y

P b

P r

DVD

To Audio OUT

To LINE 2 AUDIO IN

34

Audio cord (not supplied)

NOTE:

Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and

480p/720p progressive signals.

Connections to other equipment (continued)

To connect a HDMI or a DVI device to the unit

The HDMI 1 input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.

Rear of the unit

To DVI output

To PC/DVI

AUDIO IN

Audio cord (not supplied)

DVI device or

HDMI device

HDMI - to - DVI adapter cable

(HDMI type A connector)

(not supplied)

To HDMI out

To

HDMI1/DVI

IN HDMI cable (type A connector)

NOTE:

(not supplied)

When using HDMI 1/DVI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 19). Otherwise you will only see the image with no sound.

If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component.

Should you require further instruction, please contact the manufacturer of the external component.

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including

Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.

Rear of the unit

TV/DVD

Subwoofer

Front

Speaker

(Right)

Front

Speaker

(Left)

Coaxial Digital

Audio Output

Coaxial digital cable

(not supplied)

To Coaxial

Digital Audio Input

Center Speaker

AV Amplifier with built-in digital surround decoder as listed above

Surround

Speaker (Left)

Surround

(Right)

NOTE:

When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.

There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.

35

36

Connections to other equipment (continued)

To connect an audio system

This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the

TV’s remote control.

To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s built-in speakers

(see “Speakers” on page 19).

Rear of the unit

Amplifier

To Audio (L) Input

Audio cord (not supplied)

To Audio (R) Input

NOTE:

To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set above 0 (zero).

For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the amplifier is at its highest level.

To connect the TV/DVD to a camcorder, or a TV Game

To playback from a camcorder, connect the camcorder to the unit as shown.

This unit can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You’ll need to consult each component’s Owner’s Manual for additional information.

Rear of the unit

To VIDEO/AUDIO IN

Audio/Video cord

(not supplied)

To Audio/Video OUT or

Connections to other equipment

To connect the TV to a PC (Personal Computer)

NOTE: Before connecting any cables, disconnect the AC Power Cords of both the TV and Personal

Computer from the AC outlets.

1

Connect an RGB cable from the monitor output (a) on your PC to the RGB connector on the TV and tighten the screws. (Monitor Cable not supplied.)

NOTE:

If Computer has only DVI Output (b), a DVI to RGB converter will be required (converter not included).

2

Insert one end of a Stereo Mini-Audio cable into the PC Audio Out jack and the other end into the

TV PC/HDMI AUDIO Input jack. (Stereo Mini-

Audio Cable not supplied.)

HINT:

Volume can be adjusted both from the PC and the TV

VOL +/–.

3

Press the INPUT SELECT on your Remote

Control to step through signal inputs to select PC.

4

Press the SETUP/TV MENU to display the TV’s

PC Setup Menu. Select Auto Adjustment.

NOTE:

Power on the TV and any other peripheral equipment before powering on the computer.

(a)

RGB

Rear of the unit

(b)

DVI JACK

VGA cable (not supplied)

Audio cord (not supplied)

NOTE:

Save and close all documents, in case computer might need to be restarted.

Before connecting your computer to your TV, please refer to the following chart to set to a compatible resolution.

A Refresh Rate value of 60 Hz on your computer is recommended for your TV.

RESOLUTION

640 x 480

720 x 400

800 x 600

1024 x 768

1280 x 768

1280 x 720

1360 x 768

ASPECT RATIO

4:3

18:10

4:3

4:3

15:9

16:9

16:9

REFRESH RATE

(Hz)

56

60

72

75

60

72

75

70

60

60

60

60

HORIZONTAL

FREQUENCY

(kHz)

31.47

37.86

37.50

31.47

35.16

37.88

48.08

46.88

48.36

47.78

45.00

47.71

VERTICAL

FREQUENCY (Hz)

59.94

72.81

75.00

70.00

56.25

60.32

72.19

75.00

60.00

59.87

60.00

60.00

37

Reception disturbances

Most types of television interference can be remedied by adjusting the height and position of the VHF/

UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.

IGNITION

Black spots or horizontal streaks may appear, the picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.

GHOSTS

Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception.

SNOW

If the TV is located far from the TV station, in a fringe reception area where the signal is weak, small dots may appear in the picture.

If the signal is extremely weak, the installation of a larger external antenna may be necessary.

RADIO FREQUENCY INTERFERENCE (RFI)

Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and position of the antenna or installing an RFI filter may improve the picture.

PICTURE SIZE VARIATION

A slight picture size variation is normal when you adjust the CONTRAST or

BRIGHTNESS settings.

38

CARE AND MAINTENANCE

To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.

The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.

Use caution when cleaning or wiping the plastic parts.

Problems and troubleshooting

Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local dealer or service outlet if problems persist.

Be sure all connections are properly made when using with other units.

PAGE SYMPTOMS

POWER

POSSIBLE SOLUTIONS

TV/DVD does not operate.

TV BROADCAST RECEPTION

Make sure the power cord is plugged in.

Power is off, check fuse or circuit breaker.

Unplug unit, then plug it back in.

Poor sound or no sound.

Poor picture or no picture.

Poor reception on some channels.

Poor color or no color.

Picture wobbles or drifts.

No Cable TV reception.

Station or Cable TV experiencing problems, tune to another station.

Check Volume adjustments or muting.

Check for sources of possible interference.

Station or Cable TV experiencing problems, tune to another station.

Check antenna or Cable TV connections, reorient antenna.

Check for sources of possible interference.

Check picture control adjustments.

Station or Cable TV experiencing problems, tune to another station.

Station signal is weak, reorient antenna to receive stronger station.

Check for sources of possible interference.

Station or Cable TV experiencing problems, tune to another station.

Make sure channels are set into memory.

Check picture control adjustments.

Check antenna or Cable TV connections, reorient antenna.

Check for sources of possible interference.

Station or Cable TV experiencing problems, tune to another station.

Make sure channels are set into memory.

Cable TV company is scrambling signal.

Check antenna orientation.

Check all Cable TV connections.

Set Signal Type option to the “Cable” mode.

Station or Cable TV system problems, try another station.

Horizontal or diagonal bars on screen.

No reception above channel 13.

TV shuts off.

Closed - Caption is not activated.

• Check antenna connections, reorient antenna.

Check for sources of possible interference.

Make sure Signal Type option is in the appropriate mode.

If using antenna, check UHF antenna connections.

No broadcast on station tuned.

Sleep Timer is set.

Power interrupted.

TV station experiencing problems or program tuned is not closed captioned. Try another channel.

Check Cable TV connection or VHF/UHF antenna, reposition or rotate antenna.

Set Closed caption in the menu.

Display is not shown in your language.

REMOTE CONTROL

• Select proper language in the menu options.

The remote control does not function.

• Aim at the remote control at the remote sensor.

Operate within Approx. 15 feet or reduce the light in the room.

Clear the path of the beam.

The batteries are weak. Replace the batteries.

Check the batteries are inserted correctly.

14

14

17

18

17

15

38

20

15

17

17, 18

38

17

15, 16

38

19

17

15

38

17

20

19

15, 16

38

17

20

15

16

20

17

15, 16

23

19

• The LCD panel is a very high technology product, giving you fine picture details. Occasionally, a few nonactive pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

39

40

Problems and troubleshooting (continued)

SYMPTOMS POSSIBLE SOLUTIONS

DVD

Playback doesn’t start.

No picture.

No sound.

No disc is inserted.

The disc may be dirty. Clean up the disc.

The unit cannot play CD-ROMs, etc.

TV/DVD selector is not set correctly.

Check the input selector of the amplifier is set properly.

The unit is in the Special playback mode.

Select the correct Audio Output position on AV amplifier.

Picture is distorted during

CUE or REVIEW.

Stopping playback, search, slow-motion play, repeat play, or program play, etc. cannot be performed.

No surround sound.

The unit or remote operation key is not functioning.

Playback does not start when the title is selected.

Audio soundtrack and/or subtitle language is not changed when you play back a DVD.

• The picture will be distorted occasionally.

Some discs may not allow some functions.

The setup does not match your stereo system.

Turn off the unit and unplug the AC power cord for several minutes, then replug it.

Check the Parental setup.

Multilingual language is not recorded on the DVD disc.

No subtitle.

Angle cannot be changed.

“This operation can’t be performed” appears on the screen.

Some discs have no subtitles.

Subtitles are cleared. Press SUBTITLE.

Multi-angles are not recorded on the DVD disc.

• The function is prohibited with the unit or the disc.

PAGE

32

27

25

10

10

25

26

35

35

14

27

27

25

Specifications

Model

GENERAL

Power supply:

Power consumption:

Tuner type:

Receiving channels:

DP26670

AC 120V 60Hz

Operation: 61W

Stand by: 0.3W

8.3 kg (18.3 lbs) Weight:

Dimensions:

Display method:

Number of Pixels:

Width: 663 mm (26-1/8 inches)

Height: 498 mm (19-5/8 inches)

Depth: 214 mm (8-7/16 inches)

Operating temperature: 5˚C - 40˚C

Operating humidity: Less than 80%

TELEVISION

Type: 66.05 cm (26” class/26.01” diagonal)

Transmission TFT color LCD panel

1366 (H) x 768 (V)

NTSC standard

ATSC standard (8VSB), QAM

VHF 2-13

UHF 14-69

(A)-(W)

37-59

60-85 (AAA)-(ZZZ)

86-94

(A-5)-(A-1)

100-135

(4A)

(100)-(135)

01

Inputs:

Outputs:

Speaker:

Audio output power:

DVD/CD player

Signal system:

Applicable disc:

DP32670

Operation: 108W

Stand by: 0.3W

9.9 kg (21.8 lbs)

Width: 796.5 mm (31-3/8 inches)

Height: 581 mm (22-7/8 inches)

Depth: 214 mm (8-7/16 inches)

80.04 cm (32” class/31.51” diagonal)

S-Video: Y-Input:1.0 V (p-p), 75 ohms

C-Input:0.3 V (p-p), 75 ohms

Video: (RCA) 1 V p-p/75 ohms

Audio: (RCA) –8 dBm/50K ohms

Component video: (Y) 1 V (p-p), 75 ohms

(Pb)/(Pr) 0.7 V (p-p), 75 ohms

HDMI: HDMI compliant (type A connector) compliant

E-EDID

Suggested scan rates: 480p, 480i, 720p,1080i,1080p

PC Monitor: Mini-Dsub 15pin x 1

Antenna:

HDMI Audio: 2-channel PCM

32/44.1/48 kHz sampling frequency

16/20/24 bits per sample

VHF/UHF In 75 ohms coaxial

Digital audio out: 0.5 Vp-p 75 ohms terminated

Audio: 0-600 mV/1k ohm

40.6 mm x 121.9 mm (1-5/8 inches x 4-13/16 inches), 8 ohms x 2

5.0W + 5.0W

Pickup:

ACCESSORIES

NTSC

1.DVD (12 cm, 8 cm)

2.CD (12 cm, 8 cm)

CD: Wavelength: 790 nm

Maximum output power: 7 mW

DVD: Wavelength: 655 nm

Maximum output power: 5 mW

Remote control

AC Cord

Stand

Screws x 2

Designs and specifications are subject to change without notice.

41

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement