User Guide JV222 ENGLISH (without cut mark)

Add to my manuals
12 Pages

advertisement

User Guide JV222 ENGLISH (without cut mark) | Manualzz

USER

GUIDE

Cordless

Vacuum

Cleaner

A powerful vacuum cleaner, light and manoeuvrable

JV222

ASSEMBLY

- 2 -

SAFETY PRECAUTION

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision

2. This appliance is designed for domestic use only.

3. Do not pull on the connection cord, but rather on the plug, to separate the appliance from the mains.

4. Do not use outdoor.

5. Do not leave the appliance unattended when it is switched on, as this may be a source of danger.

6. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

7. Following objects are strictly banned, otherwise the vacuum cleaner will be damaged or fire calamity will be caused, which bring such accidents as human body injuries:

• Don’t pick up large or sharp broken such as glasses,

• Don’t pick up harming or erodent liquids (solvent, corrosive, detergent…),

• Don’t pick up inflammable or explosive substance such as gasoline or alcohol.

8. Check the device and connections regularly for visible damage. The device must not be used if the housing is damaged or other damage is present.

9. Never attempt to open the device or the mains adapter yourself or to replace the connecting cable. Always have repairs to the device carried out by a specialist workshop. There is considerable danger to the user if repairs are faulty.

10. Do not trap the mains adapter cable and when using the adapter, pay attention to where the cable is to prevent any danger of tripping over it. Keep the cable away from heated surfaces (e.g. cooker surfaces).

11. Do not touch the mains adapter and cable with wet hands.

12. Do not point the vacuum cleaner at persons or animals when in operation.

13. Only use the mains adapter on dry surfaces in buildings.

14. Only use the device with the accessories supplied.

15. Please keep these instructions in a safe place. Use only with the provided adaptor.

16. The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.

17. This appliance includes Li-ion batteries; do not incinerate the batteries or expose to high temperatures, as they may explode.

18. This appliance is only charged with the adaptor delivered together

- 3 -

COMPONENTS

5

6

1

8

7

3

2

2

9

10

11

13

12

14

4

15

1. 3 in 1 accessories

2. Charging Station

3. Tube set

4. Electric brush assembly

5. Brush Release button

6. HEPA Filter

7. Release button of HEPA Filter

8. Release button of accessories

9. Suction tube

10. On/off knob

11. Main body

12. Dust cup

13. Li-ion battery pack

14. Release button of battery

15. Wall mounted tool charging

station

- 4 -

TECHNICAL DATA

Model JV222

Rated voltage 22.2V d.c.

Unpacking and assembling

Check that all the parts in the box. (See page. 4)

Step 1.

Install the battery as below picture.

Step 2.

Install the electrical brush by inserting it into tube carefully

- 5 -

Step 3.

Install the tube with brush by inserting it into the vacuum suction tube.

Step 4.

Install the 3 in 1 accessories to suction tube or tube of vacuum cleaner as below drawings.

Vacuuming floors and carpets

You should regularly check that the nozzle cushions and the brush roller are clean in order to avoid scratching sensitive floors.

Following Step 1 to Step 3 to assemble the whole unit and then start the device by pushing the on/off button.

Vacuuming tables, furniture, car seats etc.

To clean the tables, furniture, car seats or some corners, just remove the tube by pressing the release button. And following step 4 to install the 3 in

1 tools, then press the on/off knob to start the cleaning.

- 6 -

CHARGING

Insert the adaptor into the mains socket (Note: Always make sure that the device is turned off) and then connect to the device. The indicator light will flash once the device has made contact with the adaptor.

It takes 3 hours or so to fully charge the batteries before the first use, the light will turn off on once it is full charged. In order to ensure that it is always ready for use, the device should be left on connection with adaptor when not being used.

The adaptor may become warm during charging-this is normal.

If your vacuum cleaner is with charging station, there is optional charging method.

Put the battery onto the charging base (well away from heat sources or wet places).

Insert the adaptor into the mains socket and connect the charging station.

- 7 -

HOW EMPTYING / CLEANING

1. Remove the accessories from the body by pressing the release button

2. Press the release button to open the dust cup cover, drop out the trash into the dustbin.

3. Remove the dust cup by pressing the release button, clean the cyclone part by toothbrush, Make sure that the parts are dry before they are assembled back for next using.

- 8 -

FOR CLEAN OR REPLACE THE HEPA FILTER

4. Press the button to open the front cover, take out the HEPA filter to wash it under flowing water, Dry it in air naturally before next time using (Make sure the HEPA is dry before next time using).

Or open the front cover of vacuum cleaner to replace a new HEPA filter.

RE-INSTALL THE COMPONENTS

Firstly re-install the dust cup back to the unit following up the opposite procedures when detaching the dust cup, then install the HEPA filter, the tubeset, brush or 3 in 1 tools for next time using.

- 9 -

HOW TO CLEAN THE ROLLER BRUSH

If the roller brush becomes blocked or jammed for any reason, the vacuum will be lower down. The roller brush may then need to be cleaned. Switch off the device firstly, and then carefully use a pair of scissors or a sharp knife to remove any items such as threads that may have become entangled.

If the roller brush needs to be taken out for cleaning, push slip button on the bottom of brush by finger or a coin, remove slip button as below picture, take out the roller brush for cleaning, afterwards, Put the slip button on roller brush and lock it by finger.

Cleaning of wheel axles If a wheel is jammed by threads or dirt: Remove the wheels by carefully prizing them loose using a screwdriver inserted into the cavity. Remove threads or any other objects that may have become jammed in the wheels axles.

Reassemble the wheels by pressing them tightly together.

HOW TO STORE THE VACUUM CLEANER

Install the wall-mounted tool on the wall, put the vacuum cleaner by insert it into hook as picture.

- 10 -

If your vacuum cleaner is with charging station, install the handheld vacuum cleaner into the station, put the aluminum tube by insert it into hook as picture.

Basic Technical Data

BATTERY: 22.2 V 2200 mah Li-ion

ADAPTER: Input 100~240V 50Hz

OUTPUT:27V 800 mah

CHARGE TIME: 3 hours

DISPOSAL

If the device is to be disposed of, the batteries should be removed. Used batteries should never be disposed of with household waste. These should always be taken to a recycling station.

Made in China

- 11 -

FOR

PARTS, ACCESSORIES & VACUUM BAGS

VISIT OUR WEBSITE AT

WWW.JOHNNYVAC.COM

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement