SECO-LARM USA EV-133C-DWBWQ User manual

SECO-LARM USA EV-133C-DWBWQ User manual
EV-133C-DWBWQ
15 Hi-Intensity IR LEDs
Up to 250 ft. (75m) Range
5 - 50mm Varifocal Lens
Day/Night Weatherproof
15 Hi-Intensity Infrared LEDs
These LEDs illuminate the protected area with
bright infrared light to a range of up to 250 ft.
(75 meters), allowing a single EV-133C-DWBWQ
camera to replace multiple cameras at many
customer sites.
Split-Glass Design To Stop IR Reflection
Two separate panes of glass–one covering the lens,
the other covering the LEDs–are separated by the
lens hood to stop the LEDs’ infrared light from
reflecting off the glass and back into the lens.
DC Auto Iris Varifocal Lens
The focal length of the lens can be adjusted
from 5mm to 50mm via a convenient adjustment
screw under the camera. This allows the camera
to be set to cover a wide area or focus in on a
specific target.
Concealed Cabling Through The
Camera Mount
The power and video cables are concealed in
the mount between the camera and the
mounting base in order to protect the cables and
provide for a more attractive installation.
EV-133C-DWBWQ
Features:
1/3" Sony Super HAD CCD.
550 TV lines for high resolution.
15 Hi-Intensity IR LEDs: Up to 250 ft. (75m) range.
Day/Night Operation (0 lux with LEDs on).
DC auto iris varifocal 5 - 50mm lens.
External adjustments for zoom and focus.
Split-glass design to eliminate IR reflection.
CDS sensor.
Wiring concealed in bracket to prevent tampering.
Weatherproof IP66 for outdoor use.
Dual voltage: 12VDC or 24VAC.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
16842 Millikan Avenue, Irvine, CA 92606
1.949.261.2999 (CA & Int’l)
Email: [email protected]
1.800.662.0800
Fax: 1.949.261.7326
Website: www.seco-larm.com
EV-133C-DWBWQ-Data.cdr
Specifications:
Type
Color camera
Chip
1/3” Sony Super HAD CCD
Resolution
550 TV lines
Pickup elements
768 x 494 pixels
Scanning system
NTSC 2:1 interlace
Sync
Internal
Video output
1V pp composite output, 75 ohms
Lens
DC Auto Iris, Varifocal 5mm ~ 50mm, F1.4
IR LEDs
15 high-power IR LEDs
IR distance
Up to 250’ (76m)
Minimum illumination
0.1 lux (IR off), 0 lux (IR on)
Gamma correction
0.45
S/N ratio
More than 50dB
CDS sensor
Photoconductive cells, 10 lux, Resistance 5~10k ohm
Shutter control
Auto
Backlight compensation
Off
Gain control
Auto
White balance
Auto
Power source
12VDC/24VAC (dual voltage)
Power consumption
600mA max. (IR on)
Storage temperature
-4°~140° F (-20°~60° C), humidity 95% max.
Operating temperature
14°~122° F (-10°~50° C), humidity 95% max.
Dimensions
315/16” x 59/32” x 11 7/16” (100 x 134 x 290 mm)
Weight
4lb., 7oz. (2,000g)
Dimensions:
11 13/32” (290mm)
315/16” (100mm)
313/16” (97mm)
59/32” (134mm)
311 /16” (68mm)
67/32” (158mm)
37/16” (88mm)
Copyright 2008 SECO-LARM U.S.A., Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
16842 Millikan Avenue, Irvine, CA 92606
1.949.261.2999 (CA & Int’l)
Email: [email protected]
1.800.662.0800
Fax: 1.949.261.7326
Website: www.seco-larm.com
EV-133C-DWBWQ-Data.cdr
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement