advertisement
OR-YUV44S
Component 4 x 4 Matrix
Switcher with Digital Audio
OPERATION MANUAL
Table of Contents
1.
2.
Introduction
Features
3.
4.
Package Contents
Operation Controls and Functions
4.1
Front Panel Diagram
4.2
Rear Panel Diagram
5.
6.
4.3
Remote Control
Connection Diagram
Specifications
1
1
1
2
2
3
4
5
5-6
1. Introduction
OR-YUV44S is a high performance Component of Digital/Analog Audio with Video
Matrix. It offers you maximum convenience in HDTV audio/video signal distribution when you have multiple sources to display. Each of the four HDTV audio/video sources can be directed to any one of the four outputs and or all four displays can show one identical output sources at the same time. It provides a variety of choices on where to play your image with remote controller.
2. Features
• Provides 4 x 4 matrix input/output of Component (YPbPr/YCbCr) video and L/R stereo & Coaxial digital audio signal.
• Component 4 x 4 Matrix Switcher with Digital Audio
• Supports high resolution input/output: HDTV: 480i, 576i, 480p, 576p, 1080i, and
1080p.
• Analogue stereo audio & Coaxial digital audio supporting PCM stereo, Dolby
Digital & DTS.
• Buffered video and audio output.
• IR remote control plus RS-232 control.
• Input source LED indicators on each output select.
3. Package Contents
• OR-YUV44S Component Matrix
• 12VDC Power Supply Adaptor
• Remote Controller
• Operation Manual
Page 1
4. Operation Controls and Functions
4.1 Front Panel
1
POWER
OR-YUV44S
HD 4x4
1
INPUT-SELECT
2 3 4
OUT A
2 3
1
INPUT-SELECT
2 3 4
OUT B
4
1
INPUT-SELECT
2 3 4
OUT C
5
1
INPUT-SELECT
2 3 4
OUT D
6
1. Remote control sensor.
2. Power Switch & LED Indicator: The LED will illuminate when the power is turned on.
3. 3 Input Select/Indicators for Output A: Press the “OUT A” button repeatedly to switch to your desired source. One of the four LEDs will illuminate to indicate which input source is being selected, and routed to the display.
4. Input Select/Indicators for Output B: Press the “OUT B” button repeatedly to switch to your desired source. One of the four LEDs will illuminate to indicate which input source is being selected, and routed to the display.
5. Input Select/Indicators for Output C: Press the “OUT C” button repeatedly to switch to your desired source. One of the four LEDs will illuminate to indicate which input source is being selected, and routed to the display.
6. Input Select/Indicators for Output D: Press the “OUT D” button repeatedly to switch to your desired source. One of the four LEDs will illuminate to indicate which input source is being selected, and routed to the display.
Page 2
4.1 Rear Panel
RS-232
Coaxial R
Coaxial R
L Pr/Cr Pb/Cb Y
C
Coaxial R
L Pr/Cr Pb/Cb Y
D
OUTPUT
Coaxial R
L Pr/Cr Pb/Cb Y
A
Coaxial R
L Pr/Cr Pb/Cb Y
B
Coaxial R
L Pr/Cr Pb/Cb Y
3
Coaxial R
L Pr/Cr Pb/Cb Y
4
INPUT
Coaxial R
L Pr/Cr Pb/Cb Y
1
DC 12V
L Pr/Cr Pb/Cb Y
2
1 2 3 4
1. RS-232 Communication Port: Connect to the COM port of your PC for the distant control over RS-232 Channel.
2. 2 Component with Digital (Coaxial) & L/R Audio OUTPUT Ports A, B, C and D:
Connect each set of Component (3 RCA) and Audio (2 RCA/Coaxial) to the input of your HDTV displays.
3. Component with Digital (Coaxial) & L/R Audio INPUT Ports 1, 2, 3 and 4:
Connect each set of Component (3 RCA) and Audio (2 RCA/Coaxial) to the output of your source equipments such as DVD player or set-top-box.
4. Power: Plug the 12VDC power supply into the unit and connect the adaptor to
AC wall outlet.
Page 3
4.3 Remote Control
OUTPUT
A
OUTPUT
B
OUTPUT
C
OUTPUT
D
POWER
1
2
3
4
5
CR-33
1. Power: Press the button to turn on/off the unit.
2. Input Select for Component/Audio OUT A: Press 1, 2, 3 or 4 to select the desired input source for Component/Audio OUT A.
3. Input Select for Component/Audio OUT B: Press 1, 2, 3 or 4 to select the desired input source for Component/Audio OUT B.
4. Input Select for Component/Audio OUT C: Press 1, 2, 3 or 4 to select the desired input source for Component/Audio OUT C.
5. Input Select for Component/Audio OUT D:
6. Press 1, 2, 3 or 4 to select the desired input source for Component/Audio OUT
D.
Page 4
8. RS-232 Protocol
7
8
9
3
4
5
6
PIN
1
2
OR-YUV44S
Definition
NC
Tx
Rx
NC
GND
NC
NC
NC
NC
Baud Rate: 9600bps
Data bit: 8bits
Parity: None
Stop bit: 1bit
8.1 Command Sets
COMMAND
P0
P1
ST
VR
A1
A2
A3
Page 5
Remote Control Console
7
8
9
3
4
5
6
PIN
1
2
Definition
NC
Rx
Tx
NC
GND
NC
NC
NC
NC
ACTION
Power Off (standby)
Power On *
System Status *
Firmware Version
Output A select Input 1
Output A select Input 2
Output B select Input 3
C3
C4
D1
D2
D3
D4
B3
B4
C1
C2
A4
B1
B2
*: Command “P1” and “ST” response: P? A? B? C? D?
5. Connection Diagram
Output B select Input 4
Output B select Input 1
Output B select Input 2
Output C select Input 3
Output C select Input 4
Output C select Input 1
Output C select Input 2
Output D select Input 3
Output D select Input 4
Output D select Input 1
Output D select Input 2
Output B select Input 3
Output B select Input 4
Page 6
6. Specifications
Frequency bandwidth
Input ports
Output ports
EDID
HDMI Audio output
HDMI Cable in
HDMI Cable out
Colour Space
IR
Deep Colour
HDMI Resolution
DVI Resolution
Power Supply
Dimensions (mm)
Weight (g)
Chassis Material
Silk Skin Color
Operating Temperature
Power Consumption
2.25Gbps (single link)
4 x independent IR Blasters; 1 x total IR blaster control
4 x independent IR Receiver; 1 x total IR receiver control
Standard, TV/Moving Port 1
PCM2, PCM5.1, PCM7.1, Dolby5.1, DTS5.1, DD+, D-True-
HD, DTS-HD
1080p 8bit (10M), 1080p 12bit (10M)
1080p 8bit (10M), 1080p 12bit (6M)
RGB_24/36,YCbCr 4:4:4_24/36, YCbCr 4:2:2,xvycc
Yes
1080p 12bit
480I~1080p 50/60, 1080p 24, VGA~UXGA
480I~1080p 50/60, 1080p 24, VGA~UXGA
5V 1Amp (US/EU standards, CE/FCC/UL certified)
180(W) x 120(D) x 25(H)
840
Aluminum
Black
Operating from 0°C ~ 40°C
0.86W
Page 7
Notes:
www.cypeurope.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project