SSAC Dual Function Timer
Timer - Delay-on-Make/Delay-on-Break
The TDMB combines both delay-on-make and
delay-on-break functions into one plug-in package.
Selection of the time period is accomplished with
dual switches, one for the on delay and the other
for the off delay. SPDT or DPDT output options
provide isolated, 10A switching capability.
Operation (Delay-on-Make/Delay-on-Break):
Input voltage must be applied at all times. The output
relay is de-energized. Upon closure of the initiate switch,
the green LED glows and the delay-on-make time delay
(T1) begins. At the end of T1, the output relay energizes
and the red LED glows. When the initiate switch opens,
the green LED turns OFF and the delay-on-break time
delay (T2) begins. At the end of T2, the output relay deenergizes and the red LED turns OFF.
Reset: Removing input voltage resets time delay and
output. Opening the initiate switch during the delay-onmake delay, resets T1. Closing the initiate switch during
the delay-on-break delay, resets T2.
Connection:
For more information see:
Appendix A, pages 156-164 for function descriptions
and diagrams .
Appendix B, page 165, Figure 8 for dimensional drawing.
8-pin octal SPDT
L1
Digi-Set Binary Switch Operation:
TDMB Series
Features
• Switch settable time delays from
0.1s - 10,230s in 3 ranges
• ±2% setting accuracy
• ±0.1% repeat accuracy
• 10A, SPDT or DPDT output contacts
Approvals:
Auxiliary Products:
• Panel mount kit: P/N: BZ1
• 11-pin socket: P/N: NDS-11
• Octal 8-pin socket: P/N: NDS-8
• Hold-down c lips (sold i n p airs):
P/N: PSC8 (NDS-8)
P/N: PSC11 (NDS-11)
Available Models:
TDMB422
TDMB411
TDMB422D
TDMB411D
TDMB622
TDMB413D
If desired part number is not listed, please call us to
see if it is technically possible to build .
N/L2
11-pin DPDT
(P/N ends with D)
L1
N/L2
Relay contacts are isolated .
Order Table:
TDMB
X
Input Voltage
X
Delay-on-Make
─A - 24 to 240VAC/DC
─1 - 0.1 - 102.3s in
─D - 12 to 48VDC
0.1s increments
─1 - 12VDC*
─2 - 1 - 1023s in 1s
─2 - 24VAC
increments
─3 - 24VDC
─3 - 10 - 10230s in
─4 - 120VAC
10s increments
─5 - 110VDC
─6 - 230VAC
*No control status LED for 12VDC
X
Delay-on-Break
─1 - 0.1 - 102.3s in
0.1s increments
─2 - 1 - 1023s in 1s
increments
─3 - 10 - 10230s in
10s increments
X
Type Plug/Output Form
─Blank - Octal plug (8-pin) SPDT
─D - 11-pin plug DPDT
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microcontroller circuitry
Range** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1 - 102.3s in 0.1s increments
1 - 1023s in 1s increments
10 - 10,230s in 10s increments
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . . . . . ±0.1% or 20ms, whichever is greater
Setting Accuracy . . . . . . . . . . . . . . . . . . . . . . . . ≤ ±2% or 50ms, whichever is greater
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 150ms
Time Delay vs Temp. & Voltage . . . . . . . . . . . ≤ ±2%
Control LED Indicator . . . . . . . . . . . . . . . . . . . . Green; on when the initiate switch is closed
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 or 24VDC; 24, 120, or 230VAC;
24 to 240VAC/DC; 12 to 48VDC
Tolerance
12VDC & 24VDC/AC . . . . . . . -15% - 20%
110 to 230VAC/DC . . . . . . . -20% - 10%
AC Line Frequency / DC Ripple . . . . . . . . . . . 50/60 Hz / ≤ 10%
Power Consumption . . . . . . . . . . . . . . . . . . . . . AC ≤ 2VA; DC ≤ 2W
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electromechanical relay
Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPDT or DPDT
Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10A resistive @ 120/240VAC & 28VDC;
1/3 hp @ 230VAC
Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical - 1 x107; Electrical - 1 x 10 5
Max. Switching Voltage . . . . . . . . . . . . . . . . . . 250VAC
Relay LED Indicator . . . . . . . . . . . . . . . . . . . . . Red; on when output relay energizes
(not included on 12VDC units)
Protection
Insulation Resistance . . . . . . . . . . . . . . . . . . . . . ≥ 100M
Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC units are reverse polarity protected
Isolation Voltage . . . . . . . . . . . . . . . . . . . . . . . . ≥ 1500V RMS input to output
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Plug-in socket
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 x 2.4 x 1.8 in. (81.3 x 60.7 x 45.2 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . Octal 8-pin plug-in, magnal 11-pin plug-in
Environmental
Operating / Storage Temperature . . . . . . . . . -20° to 60°C / -30° to 85°C
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 6 oz (170 g)
** For CE approved applications, power must be removed from the unit when a switch
position is changed.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Timer - Delayed Interval
ESD5 Series
The ESD5 Series is an accurate, solid-state, delayed
interval timer. It offers a 1A steady, 10A inrush
output and is available with adjustable or fixed
time delays of 0.1 seconds to 1000 minutes in six
ranges. Input voltages of 24, 120, or 230VAC are
available. Encapsulation offers protection against
shock and vibration. Adjustment options are
factory fixed, onboard or externally adjustable. The
repeat accuracy, under stable conditions, is 0.1%.
The factory calibration of the time delay is ± 5%.
Operation (Delayed Interval):
Upon application of input voltage, the T1 delay-on-make
time delay begins and the output remains de-energized.
At the end of this delay, the output energizes and the T2
interval delay begins. At the end of the interval delay
period, the output de-energizes.
Reset: Removing input voltage resets the output and the
time delays, and returns the sequence to the first delay.
Connection:
L1
For more information see:
Appendix A, pages 156-164 for function descriptions
and diagrams .
Appendix B, page 165, Figure 1 for dimensional drawing.
N/L2
External Resistance vs . Time Delay:
Features:
• Delay-on-Make with interval output
• 0.1s - 1000m in 6 ranges
• ±0.1% repeat accuracy
• ±5% factory calibration
• Factory fixed, onboard or external adjust
• Totally solid state & encapsulated
• 24, 120 or 230VAC
• 1A, solid-state output
Approvals:
Auxiliary Products:
• External ad just potentiometer:
P/N: P1004-95
P/N: P1004-95-X
• Female quick connect:
P/N: P1015-64 (AWG 14/16)
• Mounting bracket: P/N: P1023-6
• Quick connect t o s crew ad aptor:
P/N: P1015-18
• Versa-knob: P/N: P0700-7
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
Available Models:
ESD52233
ESD54160S2S
ESD54233
ESD54500
If desired part number is not listed, please call us to
see if it is technically possible to build .
RT is the external adjustment component.
Note: Terminals 4, 5 and/or 7, 8 are included
when external adjustment is ordered. A knob
is included when onboard adjust is ordered.
Order Table:
ESD5
X
Input Voltage
─2 - 24VAC
─4 - 120VAC
─6 - 230VAC
Specifications
X
Adjustment
─1 - Both Times Fixed
─2 - Both Times External Adj.
─3 - T1 Fixed, T2 External Adj.
─4 - T1 External Adj., T2 Fixed
─5 - Both Times Onboard Adj.
─6 - T1 Fixed, T2 Onboard Adj.
─7 - T1 External Adj., T2 Onboard Adj.
─8 - T1 Onboard Adj., T2 Fixed
─9 - T1 Onboard Adj., T2 External Adj.
X
T1 Delay-on-Make*
─0 - 0.1 - 10s
─1 - 1 - 100s
─2 - 10 - 1000s
─3 - 0.1 - 10m
─4 - 1 - 100m
─5 - 10 - 1000m
Time Delay
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1s - 1000m in 6 adjustable ranges or fixed
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . . . . . ±0.1% or 20ms, whichever is greater
Tolerance (Factory Calibration) . . . . . . . . . . . . ≤ ±5%
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 150ms
Time Delay vs Temp. & Voltage . . . . . . . . . . . ≤ ±2%
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 120, or 230VAC
Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20%
AC Line Frequency . . . . . . . . . . . . . . . . . . . . . . 50/60 Hz
Power Consumption . . . . . . . . . . . . . . . . . . . . . ≤ 2VA
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solid state
Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1A steady state, 10A inrush at 60°C
OFF State Leakage Current . . . . . . . . . . . . . . . ≅ 5mA @ 230VAC
Voltage Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 2.5V @ 1A
X
T2 Interval*
─0 - 0.1 - 10s
─1 - 1 - 100s
─2 - 10 - 1000s
─3 - 0.1 - 10m
─4 - 1 - 100m
─5 - 10 - 1000m
*If fixed delay is selected, insert delay (0 .1 - 1000)
followed by (S) sec . or (M) min .
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Dielectric Breakdown . . . . . . . . . . . . . . . . . . . . ≥ 2000V RMS terminals to mounting surface
Insulation Resistance . . . . . . . . . . . . . . . . . . . . . ≥ 100 MΩ
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface mount with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 2 x 1.21 in. (50.8 x 50.8 x 30.7 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connect terminals
Environmental
Operating / Storage Temperature . . . . . . . . . -40° to 75°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 2.4 oz (68g)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement