EX-series Switch Chassis Physical Specifications

EX-series Switch Chassis Physical Specifications
EX-series Switch Chassis Physical Specifications
The EX-series switch chassis is a rigid sheet-metal structure that houses the other
hardware components. Table 1 on page 1 summarizes the physical specifications
of the EX-series switch chassis.
Table 1: Physical Specifications of the EX-series Switch Chassis
Description
Value
Chassis height
1.75 inches (4.445 cm)
Chassis width
■
17.25 inches (43.82 cm)
■
19 inches (48.2 cm) with mounting brackets attached
Chassis depth
17 inches (43.18 cm), extended by 2.25 inches by power supply in models that have 600 W
and 930 W power supply
Weight
■
EX 3200 switch with 1 power supply: 15–17 lbs (6.8–7.7 kg)
■
EX 4200 switch with 1 power supply: 16–18 lbs (7.2–8.2 kg)
■
320 W power supply: 2.5 lbs (1.1 kg)
■
600 W and 960 W power supplies: 3.1 lbs (1.4 kg)
You can mount an EX-series switch on a 19-in. or 23-in. equipment rack or cabinet
by using mounting brackets. You can mount an EX-series switch on a desk or other
level surface by using rubber feet. The switch is shipped with mounting brackets and
screws to be used to secure the chassis to rack or cabinet rails. It is also shipped with
4 rubber feet to be used to stabilize the chassis on a desk or other level surface.
Related Topics
■
EX 3200 Switch—Front-Panel Description
■
EX 4200 Switch—Front-Panel Description
■
Mounting an EX-series Switch
■
Rack Requirements and Specifications for an EX-series Switch
■
Cabinet Requirements and Specifications for an EX-series Switch
■
Installing and Connecting an EX-series Switch
■
Installing and Removing EX-series Switch Hardware Components
EX-series Switch Chassis Physical Specifications
■
1
2
■
EX-series Switch Chassis Physical Specifications
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement