Pro-Ject 6 PerspeX record player User guide

Below you will find brief information for record player 6 PerspeX. This user guide will help you understand the basic operation and features of your new record player. It details how to set up, connect, and adjust the device for optimal performance. The guide also provides information on maintenance and troubleshooting.

PDF Download
Document
Pro-Ject 6 PerspeX User Guide - Musicdirect | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Gold plated phono sockets
  • Adjustable feet
  • Anti-skating force adjustment
  • Speed switch for 33 and 45 RPM
  • Built-in spirit level
  • Sorbothane® pad for motor unit
  • Downforce adjustment
  • Azimuth adjustment
  • Tonearm lift lever
  • Removable transport lock

Frequently asked questions

±0.5%

Connect the record player to the Phono input on your amplifier. Make sure that the phono input offers correct matching and amplification for the type of cartridge used.

The anti-skating force must be adjusted corresponding to the downforce. Hang the loop of the thread of the anti-skating weight in the groove of the anti-skating stub (15) corresponding to the downforce applied to your cartridge and hang the thread in the groove of the wire support (17).

Using the accessory tool provided (3a), hook the belt (3) over the larger diameter part of the motor pulley (2). To revert to 33 1/3 r.p.m. repeat the proceedings using the smaller step on the pulley.

15-30mN

Check the adjustment of the sub-chassis with the help of the spirit level supplied. If necessary, level the sub-chassis using the three knurled sub-chassis levelling screws (A,B,C), located on the plinth.

2W
Preparing document for printing…
0%