DIY_catalogi A4 1702-14.indd

DIY_catalogi A4 1702-14.indd
CATALOG
DESIGNED AND DEVELOPED IN THE NETHERLANDS
CORDLESS LI-ION SCREWDRIVER
3.6V - 1.3AH CDM1124
CORDLESS LI-ION DRILL
12V - 1.5AH CDM1118
Specifications
Mains voltage (charger)
Specifications
Mains voltage (charger)
100-240V~,
50/60Hz
3.6V-1.3Ah
3Nm
200/min.
3-5 hours
Power input
Max. torque
No load speed
Charging time
Features
- Cordless, Li-Ion technology
- Spindle lock
- LED work light
- Magnetic bitholder ¼”
- Storage case
Features
- Cordless, Li-Ion technology
- LED work light
- Single sleeve chuck 1.0-10mm
- Adjustable torque settings
- Two mechanical speed settings
- Variable electronic speed control
- Storage case
Includes
Includes
Optional Accessories
25pcs bit set - Charger adapter
Li-Ion battery (12V-1.5Ah) - 2 Double sided 50mm bits (S2) - Charger
Bit set CDA1035 - Battery CDA1085
CORDLESS LI-ION DRILL
12V - 1.5AH CDM1119
CORDLESS LI-ION DRILL
18V - 1.5AH CDM1120
Specifications
Mains voltage (charger)
Specifications
Mains voltage (charger)
Power input
Max. torque (hard)
No load speed position I
No load speed position II
Number of torque positions
Charging time
100-240V~,
50/60Hz
12V-1.5Ah
20Nm
0-350/min.
0-1.300/min.
17+1
1 hour
Power input
Max. torque (hard)
No load speed position I
No load speed position II
Number of torque positions
Charging time
100-240V~,
50/60Hz
18V-1.5Ah
32Nm
0-350/min.
0-1.300/min.
17+1
1 hour
Features
- Cordless, Li-Ion technology
- 2 Batteries
- LED work light
- Single sleeve chuck 1.0-10mm
- Adjustable torque settings
- Two mechanical speed settings
- Variable electronic speed control
- Storage case
Features
- Cordless, Li-Ion technology
- 2 Batteries
- LED work light
- Single sleeve chuck 1.5-13mm
- Adjustable torque settings
- Two mechanical speed settings
- Variable electronic speed control
- Storage case
Includes
Includes
Optional Accessories
2 Li-Ion batteries (12V-1.5Ah) - 2 Double sided 50mm bits (S2) Charger
Bit set CDA1035 - Battery CDA1085
Optional Accessories
2 Li-Ion batteries (18V-1.5Ah) - 2 Double sided 50mm bits (S2) Charger
Bit set CDA1035 - Battery CDA1087
CORDLESS LI-ION IMPACT WRENCH
18V - 4.0AH CDM1127
IMPACT DRILL
550W PDM1051
Specifications
Mains voltage (charger)
Specifications
Mains voltage
Power input
No load speed
No load impact rate
Chuck capacity
100-240V~,
50/60Hz
18V-4.0Ah
380Nm
0-2.300/min.
3-5 hours
Power input
Max torque
No load speed
Charging time
2
Power input
Max. torque (hard)
No load speed position I
No load speed position II
Number of torque positions
Charging time
100-240V~,
50/60Hz
12V-1.5Ah
20Nm
0-350/min.
0-1.300/min.
17+1
1 hour
220-240V~, 50Hz
550W
0-3.000/min.
0-48.000/min.
1.5-13mm
Features
- Cordless, Li-Ion technology
- ½” square drive shaft
- LED work light
- Variable electronic speed
- Soft grip
- Storage case
Features
- Double function
(drilling and impact drilling)
- Depth limiter
- Variable electronic speed control
- Lock-on switch
- 3m rubber cable
Includes
Includes
Li-Ion battery (18V-4.0Ah) - Socket 19mm - Socket 21mm - Charger
Side handle - Depth limiter - Chuck key
ROTARY HAMMER
850W HDM1028
IMPACT DRILL
800W PDM1052
Specifications
Mains voltage
Power input
No load speed
No load impact rate
Chuck capacity
230V~, 50Hz
800W
0-3.000/min.
0-48.000/min.
1.5-13mm
Features
- Double function
(drilling and impact drilling)
- Depth limiter
- Variable electronic speed control
- Lock-on switch
- 3m rubber cable
Includes
Side handle - Depth limiter - Chuck key
Specifications
Mains voltage
Power input
No load speed
No load impact rate
Impact energy
230-240V~,50/60Hz
850W
900/min.
4.000/min.
4.5 Joule
Features
- 3 Functions
(dilling, hammer drilling, chiseling)
- Universal SDS-plus toolholder
- 3m cable
- Storage case
Includes
Side handle - Dust cover - Grease tube - Depth gauge - 3 SDS
concrete drills (8mm, 10mm, 12mm) - Chisel pointed (250mm) Chisel flat (250mm) - Grease cover - Wrench
ROTARY HAMMER
1500W HDM1037
ANGLE GRINDER
500W - 115MM AGM1086
Specifications
Mains voltage
Power input
No load speed
No load impact rate
Impact energy
Specifications
Mains voltage
Power input
No load speed
Disc diameter
Spindle
230V~, 50Hz
1.500W
0-950/min.
0-4.400/min.
6.0 Joule
Features
- 4 Functions (drilling, hammer drilling,
free rotation chiseling, chiseling)
- Universal SDS-plus toolholder
- Variable electronic speed control
- 3m cable
- Storage case
Includes
Side handle - Dust cover - Grease tube - Depth gauge - 3 SDS
concrete drills (8mm, 10mm, 12mm) - Chisel pointed (250mm) Chisel flat (250mm) - Grease cover - Wrench
230V~, 50Hz
500W
11.000/min.
115mm
M14
Features
- Lock-on switch
- Spindle lock
- Adjustable open safety guard
- Electronic restart protection
- 3m cable
Includes
Optional Accessories
Side handle - Wrench - Hexagonal key
Diamond disc 115mm AGA1018 (open) - AGA1020 (closed)
ANGLE GRINDER
750W - 115MM AGM1060S
ANGLE GRINDER
850W - 125MM AGM1087
Specifications
Mains voltage
Power input
No load speed
Disc diameter
Spindle
Specifications
Mains voltage
Power input
No load speed
Disc diameter
Spindle
230-240V~, 50Hz
750W
12.000/min.
115mm
M14
230V~, 50Hz
850W
11.000/min.
125mm
M14
Features
- Paddle switch
- 3 Side handle positions
- Spindle lock
- Adjustable open safety guard
with quick release
- 3m rubber cable
Features
- Lock-on switch
- Spindle lock
- Adjustable open safety guard
- Electronic restart protection
- 3m cable
Includes
Optional Accessories
Includes
Optional Accessories
Side handle - Wrench
Diamond disc 115mm AGA1018 (open) - AGA1020 (closed)
Side handle - Wrench - Hexagonal key
Diamond disc 115mm AGA1019 (open) - AGA1021 (closed)
3
ANGLE GRINDER
900W - 125MM AGM1061S
ANGLE GRINDER
2500W - 230MM AGM1088
Specifications
Mains voltage
Power input
No load speed
Disc diameter
Spindle
Specifications
Mains voltage
Power input
No load speed
Disc diameter
Spindle
230-240V~, 50Hz
900W
12.000/min.
125mm
M14
Features
- Paddle switch
- 3 Side handle positions
- Spindle lock
- Adjustable open safety guard
with quick release
- 3m rubber cable
Features
- Lock-off safety switch
- Spindle lock
- Adjustable open safety guard
- Soft start
- 3 Side handle positions
- 3m rubber cable
Includes
Optional Accessories
Includes
Side handle - Wrench
Diamond disc 115mm AGA1019 (open) - AGA1021 (closed)
Side handle - Wrench - Hexagonal key
CORDLESS LI-ION JIG SAW
12V - 1.5AH JSM1026
JIG SAW
570W JSM1023
Specifications
Mains voltage (charger)
Specifications
Mains voltage
Input power
No load speed
Bevel adjustment
Saw stroke
Saw capacity wood max.
Saw capacity steel max.
100-240V~,
50/60Hz
12V-1.5Ah
2.100/min.
3-5 hours
Power input
No load speed
Charging time
230V~, 50Hz
570W
500-3.000/min.
0-45°
18mm
70mm
6mm
Features
- Cordless, Li-Ion technology
- Quick release blade holder
- Universal, suitable for T & U shank blades
- Soft grip
- Storage case
Features
- Lock-on switch
- Electronic variable speed
- 4 Pendulum positions
- Variable mitre cut adjustment to 45°
- Dust extraction outlet
- 3m cable
Includes
Includes
Optional Accessories
Li-Ion battery (12V-1.5Ah) - Saw blade (wood) Saw blade (metal) - Charger
Battery CDA1094 - Jig saw blades 10pcs JSA1004
JIG SAW
710W JSM1014
Specifications
Mains voltage
Input power
No load speed
Bevel adjustment
Saw stroke
Saw capacity wood max.
Saw capacity steel max.
Optional Accessories
Parallel guide - Hexagonal key - Vacuum cleaner adapter 4 T-shank saw blades
Jig saw blades 10pcs JSA1004
RECIPROCATING SAW
710W RSM1019
230V~, 50Hz
710W
800-3.000/min.
0-45°
20mm
110mm
10mm
Specifications
Mains voltage
Input power
No load speed
Saw stroke
230-240V~, 50Hz
710W
0-2.800/min.
20mm
Features
- Lock-on switch
- Electronic variable speed
- 4 Pendulum positions
- Variable mitre cut adjustment to 45°
- Dust extraction outlet
- 3m cable
Features
- Lock-on switch
- Electronic variable speed
- Toolless saw blade release
- Adjustable front plate
- 3m rubber cable
Includes
Includes
Optional Accessories
Optional Accessories
4
230-240V~, 50Hz
2.500W
6.500/min.
230mm
M14
Parallel guide - Hexagonal key - Vacuum cleaner adapter 3 T-shank saw blades
Jig saw blades 10pcs JSA1004
Hexagonal key - 2 Saw blades
Reciprocating blades 9pcs RSA1001
PRECISION CIRCULAR SAW
400W CSM1038
CIRCULAR SAW
1200W - 185MM CSM1039
Specifications
Mains voltage
Input power
No load speed
Saw blade diameter
Saw blade bore
Cutting depth
Specifications
Mains voltage
Input power
Bevel adjustment
No load speed
Saw blade diameter
Saw blade bore
Cutting depth max.
Cutting depth max.
230-240V~, 50Hz
400W
4.200/min.
54.8mm
11.1mm
0-12mm
230-240V~, 50Hz
1.200W
0-45°
5.000/min.
185mm
20mm
65mm (90°)
43mm (45°)
Features
- Laser guidance
- Adjustable sawing depth
- 4pcs saw blade set included
- 3m cable
- Storage case
Features
- Angle and depth adjustment
- Parallel guide
- Spindle lock
- 3m rubber cable
Includes
Includes
Optional Accessories
Optional Accessories
Hexagonal key - Batteries for laser - Diamond blade G50 TCT saw blade T14 - HSS saw blade T44 - HSS saw blade T60 Dust extraction hose
Precision saw blade CSA1033 (G50) - CSA1034 (18T-TCT) - CSA1035
(44T-HSS) - CSA1037 (80T-HSS) - Dust extraction hose CSA1039
Hexagonal key - Parallel guide - TCT saw blade 185mm T24
Saw blade CSA1007 (T24)
WALL SLOTTER
1700W - 125MM WSM1009
WALL SLOTTER
1600W - 150MM WSM1008
Specifications
Mains voltage
Input power
No load speed
Cutting depth
Cutting width
Disc diameter
Specifications
Mains voltage
Input power
No load speed
Cutting depth
Cutting width
Disc diameter
230-240V~, 50Hz
1.700W
4.000/min.
0-28mm
14-19-29mm
125mm
230V~, 50Hz
1.600W
6.000/min.
8-40mm
8-30mm
150mm
Features
- Overload protection
- Soft start
- Spindle lock
- Laser guidance
- Adjustable cutting depth and width
- 3m cable
- Storage case
Features
- Overload protection
- Soft start
- Power feedback
- Spindle lock
- Laser guidance
- Adjustable cutting depth and width
- 3m cable
- Canvas storage bag
Includes
Includes
Optional Accessories
2 Diamond discs - Universal vacuum cleaner adapter - Chisel Hexagonal key - Batteries for laser
Saw blade set 2pcs WSA1001 (125mm open)
Optional Accessories
2 Diamond discs - Universal vacuum cleaner adapter - Chisel Batteries for laser
Saw blade set 2pcs WSA1002 (150mm open)
PAINT/CEMENT MIXER
1400W PMM1006
DETAIL SANDER
220W PSM1013
Specifications
Mains voltage
Input power
No load speed (I)
No load speed (II)
Specifications
Mains voltage
Input power
No load speed
Sanding movements
Sanding paper size
230V~, 50Hz
1.400W
180-380/min.
300-650/min.
Features
- Lock-on switch
- Variable electronic speed control
- Two mechanical speed settings
- Whisk included
- 3m rubber cable
Features
- Velcro ® base plate
- Active dust extraction
- 3m cable
- Storage case
Includes
Optional Accessories
Includes
Optional Accessories
Whisk for general purposes - 2 Wrenches
Whisk PMA1004
230V~, 50Hz
220W
13.000/min.
26.000/min.
145x145x88mm
triangle shape
5 Sanding papers (P80) - 5 Sanding papers (P120) - Dust bag
Sanding paper set 5pcs PSA1007 (P80) - PSA1008 (P120)
5
ORBITAL SANDER
135W PSM1027
Specifications
Mains voltage
Input power
No load speed
Sanding surface
230V~, 50Hz
135W
13.000/min.
90x187mm
Specifications
Mains voltage
Input power
No load speed
Sanding movements
Sanding surface
230V~, 50Hz
180W
12.000/min.
24.000/min.
90x187mm
Features
- Velcro ® base plate
- Paper clamping system
- Universal vacuum cleaner adapter
- 3m rubber cable
Features
- Aluminum Velcro ® base plate
- Paper clamping system
- Universal vacuum cleaner adapter
- 3m cable
Includes
Optional Accessories
Includes
Sanding paper (P80) - Vacuum cleaner adapter
Sanding paper set 10pcs PSA1035 (P60) - PSA1036 (P80) PSA1037 (P120)
Optional Accessories
5 Sanding papers (P80) - 5 Sanding papers (P120) Vacuum cleaner adapter
Sanding paper set 5pcs PSA1029 (P80) - PSA1030 (P120) PSA1037 (P60 P80 P120)
DELTA SANDER
280W DSM1009
RANDOM ORBITAL SANDER
430W ESM1010
Specifications
Mains voltage
Input power
No load speed
Sanding movements
Sanding surface
Specifications
Mains voltage
Input power
No load speed
Base plate diameter
230-240V~, 50Hz
280W
6.000-11.000/min.
12.000-22.000/min.
90x90x90mm
230-240V~, 50Hz
430W
5.000-13.000/min.
125mm
Features
- Velcro ® base plate
- Electronic variable speed
- Universal vacuum cleaner adapter
- 3m cable
Features
- Velcro ® base plate
- Electronic variable speed
- 3m cable
Includes
Includes
Optional Accessories
2 Sanding papers (P80 / wood) - 2 Sanding papers (P80 / paint) 2 Sanding papers (P80 / stone) - Vacuum cleaner adapter Protection cover for sanding pad nose
Sanding paper set 10pcs PSA1033 (P80) - PSA1034 (P120)
Optional Accessories
Dust collection box - 2 Sanding papers (P60) 2 Sanding papers (P80) - 2 Sanding papers (P120)
Sanding paper set 5pcs PSA1018 (P60) - PSA1019 (P80) PSA1020 (P120)
PRECISION BELT SANDER
400W EFM1001
BELT SANDER
950W BSM1024
Specifications
Mains voltage
Input power
No load speed
Belt length
Belt width
Specifications
Mains voltage
Input power
Belt dimension
Sanding surface
Belt speed
230-240V~, 50Hz
400W
1.070-1.650/min.
455mm
8 and 13mm
230V~, 50Hz
950W
75x533mm
75x135mm
380m/min.
Features
- Electronic variable speed
- Quick release belt exchange
- 3m cable
- Storage case
Features
- Electronic variable speed
- Quick release belt exchange
- 3m cable
Includes
Includes
Optional Accessories
Optional Accessories
6
ORBITAL SANDER
180W PSM1024
Dust bag - Vacuum cleaner adapter - 3 Sanding arm (8mm, 13mm,
13mm angled) - 12 Sanding papers
Sanding belt set 8pcs P40, P80, P120 EFA1003 (10mm) EFA1004 (13mm)
Sanding belt (P80) - Dust bag
Sanding belt set 3pcs P60, P80, P120 (BSA1013)
BELT SANDER
950W BSM1021
Specifications
Mains voltage
Input power
Belt dimension
Sanding surface
Belt speed
PLANER
650W PPM1010
230V~, 50Hz
950W
76x533mm
76x135mm
220-350m/min.
Specifications
Mains voltage
Input power
No load speed
Max. planing width
Max. planing depth max
230V~, 50Hz
650W
16.500/min.
82mm
2mm
Features
- Dual function for both manual and
stationary use
- Electronic variable speed
- Quick release belt exchange
- 3m cable
Features
- Lock-on switch
- Adjustable planing depth
- Reversible hard metal planing knives
- 3m cable
Includes
Includes
Optional Accessories
Optional Accessories
Dust bag - Sanding paper (P60) - Sanding paper (P80) Sanding paper (P120) - 2 Stationary clamps - Rubber sheet
Sanding belt set 3pcs P60, P80, P120 (BSA1013)
Parallel guide - Spare belt - Dust bag
Chisel set 2pcs 82mm PPA1003
PRECISION ROUTER
1300W PRM1015
ROUTER TABLE
PRA1011
Specifications
Mains voltage
Power input
No load speed
Max. cutting depth
Max. cutter diameter
Specifications
Mains voltage
230V~, 50Hz
Table size
455x330mm
Max. base plate diameter router
162mm
230V~, 50Hz
1300W
9.000-30.000/min.
60mm
30mm
Features
- Accurate depth adjustment: 0.1mm
- Electronic variable speed control
- LED work light
- Lock-on switch in handle
- Dust extraction connector
- Spindle lock
- 3m cable
Features
- Safety switch
- Dust extraction port
- Adjustment plate
- Robust and stable aluminum construction,
provided with rubber feet
- Fits all current FERM routers and most
other routers
Includes
Includes
Optional Accessories
Parallel guide - Template guide - Wrench - Hexagonal key 6pcs bit set - 6mm+8mm collet
Router bit set 8pcs PRA1008 - Router table PRA1011
Fence - Featherboard - Vacuum cleaner adapter
PRECISION BISCUIT JOINTER
900W BJM1009
CORDLESS LI-ION MULTI TOOL
12V - 1.5AH OTM1006
Specifications
Mains voltage
Input power
No load speed
Saw blade
Saw blade thickness
Cutting depth
Base adjustment
Biscuits size
Specifications
Mains voltage (charger)
230V~, 50Hz
900W
11.000/min.
100x22mm
4mm
0-14mm
0°-90°
0-10-20
Features
- For creating precise joints and sawing
parquet along walls
- Easy adjustment for angle and material
thickness
- Aluminum base plate
- Spindle lock function
- Storage case
Includes
Optional Accessories
Saw blade 100x22x4mm - Hexagon key - Dustbag - 50 Biscuits (#20)
Biscuits 50pcs 56x23x4mm BJA1004 - Saw blade BJA1005
Power input
No load speed
Oscillation angle
Charging time
100-240V~,
50/60Hz
12V-1.5Ah
5.000-18.000/min.
3.0°
3-5 hours
Features
- Cordless, Li-Ion technology
- Universal blade connection
- Electronic variable speed
- Easy blade exchange
- Soft grip
- Storage case
Includes
Optional Accessories
Li-Ion battery (12V-1.5Ah) - 3 Sanding papers - Velcro® sanding
base plate - HSS half round cutting blade - Plunge cutting blade Scraping knife - Hexagon key
Battery CDA1094 - Plunge cutting blade OTA1001 - Scraping knife
OTA1002 - Sanding pad OTA1003 - HSS segment saw blade OTA1004
- Carbide blade OTA1005
7
MULTI TOOL
280W OTM1005
CORDLESS LI-ION COMBITOOL
12V - 1.5AH CTM1016
Specifications
Mains voltage
Input power
No load speed
Oscillating angle
Specifications
Mains voltage (charger)
230V~, 50Hz
280W
11.000-20.000/min.
2.8°
Features
- Lock-on switch
- LED work light
- Universal vacuum cleaner adapter
- Electronic variable speed
- Easy blade exchange
- 3m cable
- Storage case
Includes
Optional Accessoires
Vacuum cleaner adapter - 10 Sanding papers - Velcro® sanding
base plate - HSS half round cutting blade - Plunge cutting blade Scraping knife - Carbide saw blade - Hexagon key
Plunge cutting blade OTA1001 - Scraping knife OTA1002 Sanding pad OTA1003 - HSS segment saw blade OTA1004 Carbide blade OTA1005
Power input
No load speed
Charging time
Features
- Cordless, Li-Ion technology
- Electronic variable speed
- Suitable for 2.4mm and 3.2mm
accessories
- Soft grip
- Spindle lock
- Storage case
Includes
Optional Accessories
1 Li-Ion battery (12V-1.5Ah) - 43 Accessories - Collet Ø2.4mm Collet Ø3.2mm - Wrench - Charger
Battery CDA1094 - Combitool set 100pcs CTA1007 Combitool set 40pcs CTA1008
COMBITOOL
160W CTM1012
COMBITOOL SET
160W CTM1010
Specifications
Mains voltage
Input power
No load speed
Collet diameter
Specifications
Mains voltage
Input power
No load speed
Collet diameter
230V~, 50Hz
160W
15.000-35.000/min.
2.4 and 3.2mm
230V~, 50Hz
160W
15.000-35.000/min.
2.4 and 3.2mm
Features
- Electronic variable speed
- Spindle lock
- 3m cable
- Storage case
Features
- Electronic variable speed
- Spindle lock
- 3m cable
- Flexible shaft
- Adjustable stand
- Desk stand
- Storage case
Includes
Optional Accessories
Includes
Optional Accessories
40 Accessories - Collet Ø2.4mm - Collet Ø3.2mm - Wrench
Combitool set 100pcs CTA1007 - Combitool set 40pcs CTA1008
40 Accessories - Collet Ø2.4mm - Collet Ø3.2mm -Wrench
Combitool set 100pcs CTA1007 - Combitool set 40pcs CTA1008
HOT AIR GUN
2000W HAM1015
CORDLESS LI-ION ELECTRIC TACKER
3.6V - 1.5AH ETM1005
Specifications
Mains voltage
Input power
Pos. I:
Pos. II:
Specifications
Mains voltage (charger)
220-240V~, 50Hz
2.000W
300 L/min. 450°C
500 L/min. 600°C
Power input
Staple width
Staple length
Max. staple speed
Charging time
100-240V~,
50/60Hz
3.6V - 1.5Ah
11.3mm (type 530)
6-12mm
30pcs/min.
1 hour
Features
- Overheat protection
- Stationairy mode
- 2 Heat and air flow settings
- 3m cable
- Storage case
Features
- Cordless, Li-Ion technology
- Max. staple size 12mm
- LED work light
- 100pcs max. capacity
- Soft grip
- USB charger
- Storage case
Includes
Includes
Fishtail diffuser - Deflector diffuser
Optional Accessories
8
100-240V~,
50/60Hz
12V-1.5Ah
3.000-20.000/min.
3-5 hours
1000 Staples 6mm - 1000 Staples 12mm - Charger USB charge cable
Staples 2000pcs ETA1009 (8mm)
ELECTRIC TACKER
MAX. 16MM ETM1004
CORDLESS LI-ION GLUE GUN
7.2V - 1.5AH GGM1003
Specifications
Mains voltage
Staple width
Staple length
Nail length
Specifications
Mains voltage (charger)
230V~, 50Hz
11.3mm
8-16mm
15-16mm
Features
- Impact control wheel
- Anti-jam mechanism
- Compact design
- Safety switch
Includes
Optional Accessories
100-240V~,
50/60Hz
7.2V-1.5Ah
45min.
1 hour
Ø7mm
Power input
Runtime on 1 charge:
Charging time
Glue stick size
Features
- Cordless, Li-Ion technology
- Fast: 15s pre-heat time
- 170° C work temp.
- Automatic stop
(after 5 minutes of inactivity)
- Soft grip
- Storage case
400 Staples 14mm - 100 nails 15mm
Nails 1500pcs ETA1005 (15mm) - Staples 2000pcs ETA1009 (8mm) Staples 2000pcs ETA1010 (14mm)
6 Glue sticks GGA1003 (7x150mm)
SOLDERING SET
100W/30W SGM1001
GLUE GUN
16W GGM1002
Specifications
Mains voltage
Input power
Glue stick diameter
Includes
230V~, 50Hz
16W
11.2mm
Specifications
Mains voltage
Input power soldering gun
Input power soldering iron
Heating time soldering gun
Heating time soldering iron
Features
- LED work light
- Adjustable table stand
- Changeable nozzle
- Storage case
Features
- LED work light
- Storage case
Includes
Optional Accessories
Includes
4 Glue sticks - Nozzle round - Nozzle flat
6 Glue sticks GGA1002 (11.2x100mm)
230V~, 50Hz
100W
30W
35sec.
120sec.
Soldering clamp with magnifying glass - Solder suction tool Stand for soldering iron - Roll of solder - Soldering paste Terminal pin - Spare tip
SOLDERING / BLOW TORCH
MAX. 1500°C SGM1006
MULTIPURPOSE SPRAY GUN
110W SGM1012
Specifications
Runtime on single fill
Max. flame temperature
Max. soldering temperature
Specifications
Mains voltage
Input power
Max flow
Container
35min.
1500°C
500°C
220-240V~, 50Hz
110W
300ml/min.
800ml
Features
- For precise soldering, shrinking,
hot cutting, lighting your fireplace,
for kitchen use etc.
- Suitable for standard lighter gas
- Storage case
Features
- Adjustable flow control
- Easy cleaning
- Airless spray
- 3m cable
Includes
Includes
Standard tip - Chisel tip - Diagonal tip - Hot blower tip - Hot knife tip Scraper - 2 Wrenches - De-soldering sponge
Paint container - Flexible nozzle extension - Spare nozzle - Viscosity
measuring cup - Cleaning pin - Ear plugs - Wrench - Piston
9
BENCH PILLAR DRILL
350W TDM1025
BENCH GRINDER
150W - 150MM BGM1019
Specifications
Mains voltage
Input power
Chuck capacity
Taper of spindle
No load speed
Specifications
Mains voltage
Input power
Grinding stone dimensions
Grinding stone grain
Grinding stone bore
No load speed
230V~, 50Hz
350W
13mm
B16
580-850-1.2201.650-2.650/min.
580mm
50mm
104mm
Total height
Travel of spindle
Horizontal distance
chuck to column
Features
- Cast iron base for maximum stability
- Key chuck (13mm)
- Cross laser
- In height adjustable working table with
two way angle adjustment from 0° to 45°
- Safety switch
Features
- Dust protected switch
- Metal base
- Mountable to work bench
Includes
Optional Accessories
Includes
Chuck key - 2 Hexagonal keys - 2 Batteries (AAA)
Machine vise TDA1013
Grinding stones (P36 & P60) - 2 Spark arresters - 2 Work rests Safety glasses
Grinding stone 150mm BGA1053 (16mm - P36) BGA1054 (16mm - P60)
BENCH GRINDER
250W - 150MM BGM1020
WET AND DRY GRINDER
250W BGM1021
Specifications
Mains voltage
Input power
Grinding stone dimensions
Specifications
Mains voltage
Input power
Grinding stone dimensions
Grinding stone grain
Grinding stone bore
No load speed
230V~, 50Hz
250W
150x20mm
150x40mm
P36 (grey)
P80 (white)
12.7mm
2.950/min.
Grinding stone grain
Grinding stone bore
Features
- Dust protected switch
- Metal base
- Mountable to work bench
Features
- Dust protected switch
- Metal base
- Mountable to work bench
Includes
Includes
Optional Accessories
Grinding stones (P36 & P80) - 2 Spark arresters - 2 Work rests Safety glasses
Grinding stone 150mm BGA1055 (20mm - P36) BGA1056 (40mm - P80)
BENCH SANDER
375W BGM1003
Specifications
Mains voltage
Input power
Belt dimension
Disc diameter
Belt speed
Disc speed
Belt position adjustable
Table position adjustable
Optional Accessories
230V~, 50Hz
250W
150x20mm
200x40mm
P36 (dry)
P80 (wet)
12.7mm(dry)
20mm (wet)
Grinding stones (P36 & P80) - 2 Spark arresters - 2 Work rests Safety glasses
Grinding stone BGA1055 (150mm - 20mm - P36) BGA1057 (200mm - 40mm - wet use)
SCROLL SAW
90W SSM1005
230V~, 50Hz
375W
100x915mm
150mm
276m/min.
1.450/min.
0°-90°
0°-45°
Specifications
Mains voltage
Input power
Bevel adjustment table
Max. working depth
Max. material thickness
No load speed
Saw blade length
230V~, 50Hz
90W
0-45°
400mm
55mm
1.440/min.
132mm
Features
- Dust protected safety switch
- Adjustable sanding belt position
- Adjustable working table
- Quick release belt exchange
- Rubber feet
Features
- Safety switch
- Toolless saw blade release
- Transparent guard
- Working table adjustable from 0-45°
- Flexible dust blower
- Mitre/parallel guide
- Rubber feet
Includes
Includes
Optional Accessories
Optional Accessories
10
Optional Accessories
230V~, 50Hz
150W
150x16mm
P36 & P60
12.7mm
2.950/min.
2 Sanding belts (P80, P120) - 2 Sanding discs (P80, P120) - Wrench Mitre guide - Hexagonal key
Sanding belt set 3pcs BGA1058 (P60, P80, P150) - BGA1059 (P60) BGA1060 (P100) - Sanding disc set 10pcs BGA1036 (P60) BGA1037 (P100) - BGA1038 (P150) - BGA1039 (P60, P100, P150)
Mitre guide - 10 Saw blades - 2 Universal saw blade adapters
Scroll saw blade set 5pcs SSA1001 (15TPI) - SSA1002 (10TPI) SSA1003 (18TPI) - SSA1004 (25TPI)
MITRE SAW
1300W - 210MM MSM1037
RADIAL MITRE SAW
1900W - 210MM MSM1035
Specifications
Mains voltage
Power input
No load speed
Max. saw capacity
Mitre 0°,bevel 0°
Mitre 0°,bevel 45°
Mitre 45°,bevel 0°
Mitre 45°,bevel 45°
Specifications
Mains voltage
Power input
No load speed
Max. saw capacity
Mitre 0°,bevel 0°
Mitre 0°,bevel 45°
Mitre 45°,bevel 0°
Mitre 45°,bevel 45°
230-240V~, 50Hz
1.300W
4.500/min.
55x120mm
32x120mm
55x80mm
32x80mm
230V~, 50Hz
1.900W
4.800/min.
60x310mm
35x310mm
60x210mm
35x210mm
Features
- Metal base plate
- Sliding fence
- Laser guidance
- Transparent saw blade cover
- Mountable to workbench
- Toolless mitre and bevel adjustment
- 2m cable
Features
- Metal base plate
- Sliding fence
- Laser guidance
- Mountable to workbench
- Pre-settings for quick and accurate
mitre-angle adjustment
- 2.5m cable
Includes
Includes
Optional Accessories
TCT saw blade 210x30mm T48 - Hexagonal key - Dust bag Work piece clamp - 2 Side extensions - Batteries for laser Safety glasses - Ear plugs
Saw blade 210mm MSA1024 (24T) - MSA1025 (40T)
Optional Accessories
TCT saw blade 210x30mm T48 - Hexagonal key - Dust bag Work piece clamp - 2 Side extensions - Batteries for laser Safety glasses - Ear plugs
Saw blade 210mm MSA1024 (24T) - MSA1025 (40T)
RADIAL MITRE SAW
1900W - 255MM MSM1038
TABLE SAW
800W - 200MM TSM1032
Specifications
Mains voltage
Power input
No load speed
Max. saw capacity
Mitre 0°,bevel 0°
Mitre 0°,bevel 45°
Mitre 45°,bevel 0°
Mitre 45°,bevel 45°
Specifications
Mains voltage
Input power
No load speed
Table size
Saw blade diameter
Saw blade bore
Cutting capacity max.
Cutting capacity max.
230V~, 50Hz
1.900W
4.800/min.
70x310mm
40x310mm
70x210mm
40x210mm
230V~, 50Hz
800W
2.950/min.
500x355mm
200mm
16mm
45mm (bevel 0°)
27mm (bevel 45°)
Features
- Metal base plate
- Sliding fence
- Laser guidance
- Transparent saw blade cover
- Mountable to workbench
- Pre-settings for quick and accurate
mitre-angle adjustment
- 2.5m cable
Features
- Safety switch
- Induction motor
- Adjustable table 0-45°
- Mountable to workbench
- Parallel/mitre guide and clear scale
- 2m cable
Includes
Includes
Optional Accessories
TCT saw blade 255x30mm T48 - Hexagonal key - Dust bag Work piece clamp - 2 Side extensions - Batteries for laser Safety glasses - Ear plugs
Saw blade 255mm MSA1028 (40T) - MSA1029 (72T)
Optional Accessories
TCT saw blade 200x16mm T24 - Wrench - Mitre guide Parallel guide - Push stick - Safety glasses - Ear plugs
Saw blade 200mm MSA1021 (24T) - MSA1022 (40T)
TABLE SAW
1800W - 250MM TSM1033
TILE CUTTER
600W - 180MM TCM1010
Specifications
Mains voltage
230-240V~, 50Hz
Input power
1.800W
No load speed
4.700/min.
Saw blade adjustment
0-45°
Max. cutting capacity
0° 74mm - 45° 63mm
Saw blade diameter
250mm
Table height
865mm
Table size (fully extended)
930x625mm
Specifications
Mains voltage
Input power
No load speed
Table adjustment
Table size
Disc diameter
Saw blade bore
Features
- Safety switch
- Overload protection
- Dust extraction
- Extendable aluminum table top
- Height adjustable saw blade
- Angle adjustable saw blade
Features
- Safety switch
- Adjustable table from 0-45°
- Durable chrome plated table
- Parallel / mitre guide
- Low noise induction motor
- Water cooling
- Mountable to workbench
Includes
Includes
Optional Accessories
TCT saw blade 250x30mm T40 - Wrench - Hexagonal key Mitre guide - Parallel guide - Push stick - 1 Set sliding feed Safety glasses - Ear plugs
Saw blade 250mm MSA1026 (40T) - MSA1027 (72T)
Optional Accessories
230V~, 50Hz
600W
2.950/min.
0-45°
360x330mm
180mm
22.2mm
Diamond saw blade 180x22.2mm - Wrench - Parallel guide Water tray - Safety glasses - Ear plugs
Diamond disc 180mm TCA1004
11
TILE CUTTER
900W - 200MM TCM1011
AIR COOLED GENERATOR
700W - 2HP PGM1010
Specifications
Mains voltage
Input power
No load speed
Table adjustment
Table size
Disc diameter
Saw blade bore
Specifications
Engine power
Voltage
Rated output
Max. output
Tank capacity
Fuel
230V~, 50Hz
900W
2.950/min.
0-45°
500x400mm
200mm
25.4mm
Sound pressure (Lwa)
Features
- Safety switch
- Adjustable table from 0-45°
- Durable chrome plated table
- Parallel / mitre guide
- Low noise induction motor
- Water cooling
- Mountable to workbench
Features
- 2-Stroke generator with up to 8 hours
runtime on a single tank of fuel
- Overload switch
- Shock absorbing feet
Includes
Includes
Optional Accessories
Diamond saw blade 200x25.4mm - Wrench - Parallel guide Water tray - Safety glasses - Ear plugs
Diamond disc 200mm TCA1005
Spark plug socket - Driver handle - Oil cup
ARC WELDER
40 - 100A WEM1042
ARC WELDER
55 - 160A WEM1035
Specifications
Mains voltage
Welding current
Electrode thickness
Welding cable
Earth cable
Specifications
Mains voltage
Welding current
230V~, 50Hz
40-100A
1.6-2.5mm
2.1m
1.5m
Electrode thickness
Welding cable
Earth cable
230/400V~, 50Hz
400V max. 160A
230V max. 140A
2.0-4.0mm
2.1m
1.5m
Features
- Current indicator
- Thermal cut-out with control lamp
- Forced cooling
Features
- Current indicator
- Thermal cut-out with control lamp
- Suitable for use with either 230V~ or
400V~
- Forced cooling
Includes
Includes
Optional Accessoriesºº¡
Welding mask - Scaling hammer/ Steel-wire brush Quick instruction card
Electrodes 12pcs WEA1016 (2mm) - WEA1017 (2.6mm) Electrodes 1kg WEA1011 (2mm) - WEA1012 (2.6mm) Electrodes 5kg WEA1014 (2.6mm)
Optional Accessories
Welding mask - Scaling hammer/ Steel-wire brush Quick instruction card
Electrodes 12pcs WEA1016 (2mm) - WEA1017 (2.6mm) WEA1018 (3.2mm) - Electrodes 1kg WEA1011 (2mm) WEA1012 (2.6mm) - WEA1013 (3.2mm) Electrodes 5kg WEA1014 (2.6mm) - WEA1015 (3.2mm)
BATTERY CHARGER
6V / 12V BCM1021
BATTERY CHARGER
6V / 12V BCM1020
Specifications
Mains voltage
Power Input
Battery capacity
Specifications
Mains voltage
Power Input
Fast charge
230V~, 50Hz
Max. 110W
Min. 20Ah
Max. 75Ah
Normal charge
Includes
230V~, 50Hz
Max. 400W
12V DC,
12A 100S
6A 180S
6/12V DC, 2A
Features
- Transport handle
- Fast and normal charge
- Deep cycle
- LCD display and indicator
- Reverse polarity, short circuit and
overload protection
- Recharge of drained batteries
Features
- Ampere meter
- 6/12V charging
12
2HP
230V~, 50Hz
700W
800W
4.5 Liter
Gasoline and oil
Mixture (50:1)
60dB
Set battery clamps - 10A fuse
Includes
Set battery clamps - 80A fuse
BOTTLE JACK
MAX. 2000KG JBM1001
TROLLY JACK KIT
MAX. 2000KG TJM1008
Specifications
Max. lifting capacity
Min. height
Max. height
Spindle travel
Lifting height
Specifications
Max. lifting capacity
Min. height
Max. height
Lifting height
2.000kg
181mm
345mm
48mm
116mm
2.000kg
135mm
356mm
221mm
Features
- Controlled release system
- Compact design
- Large lifting range
- Storage case
Features
- Solid construction with integrated safety
valve against overloading
- Control release system
- Two ball bearing castors
- Carrying handle
- Storage case
PLATFORM TRUCK
MAX. 150KG TTM1027
HAND TRUCK
MAX. 225KG TTM1028
Specifications
Max. carrying capacity
Platform dimensions
2 Swivel wheels
2 Fixed wheels
Specifications
Max. carrying capacity
225kg
Size
1.130x545x430mm
Lifting plate thickness
3.5mm
150kg
734x480mm
Features
- Rubber wheels
- Foldable push bar
- Large plateau
Features
- Ball bearing wheels with inflatable tyres
- Stable base plate
- Steel rims
HIGH PRESSURE CLEANER
1850W GRM1013_1
PORTABLE COMPRESSOR
1100W CRM1049
Specifications
Mains voltage
Power input
Max. pressure
Max. flow
Specifications
Mains voltage
Power input
No load speed
Air displacement
230V~, 50Hz
1.850W
135 bar
427 liter/hour
230V~, 50Hz
1.100W (S3-15%)
3.550/min.
180 liter/min.
Features
- Aluminium pump
- Seperate detergent bottle
- Auto stop system
- Accessory storage facility
- 5m cable
Features
- Oil free
- 3m Rubber hose with
universal quick coupling
- Carrying handle with soft grip
- 5m cable
Includes
Includes
Standard lance (on machine) - 6m Hose - Detergent bottle Turbo lance - Fixed brush - Rotary brush
Tyre inflator with manometer - Blow gun nozzle - 3 Adapters
13
OIL LUBRICATED COMPRESSOR
1.1HP-750W-8L CRM1044
OIL LUBRICATED COMPRESSOR
1.5HP-1100W-24L CRM1045
Specifications
Mains voltage
Power input
Tank capacity
No load speed
Air displacement
Specifications
Mains voltage
Power input
Tank capacity
No load speed
Air displacement
230V~, 50Hz
750W-1.1HP
8L
2.850/min.
118 liter/min.
230V~, 50Hz
1100W-1.5HP
24L
2.850/min.
155 liter/min.
Features
- Powerful single cylinder pump
- Pressure adjustment from 0-8 bar
- Silent direct drive induction motor
- Universal ¼” quick coupling
- 2 Manometers for tank and outlet
pressure
Features
- Powerful single cylinder pump
- Pressure adjustment from 0-8 bar
- Silent direct drive induction motor
- Universal ¼” quick coupling
- 2 Manometers for tank and outlet
pressure
Includes
Optional Accessories
Includes
Optional Accessories
Oil
Air accessory set 6pcs ATA1025 Coiled hose 5m + couplings ATA1026
Air hose 10m + coupling ATA1027 Hose reel 9m ATA1033
Oil
Air accessory set 6pcs ATA1025 Coiled hose 5m + couplings ATA1026
Air hose 10m + coupling ATA1027 Hose reel 9m ATA1033
OIL LUBRICATED COMPRESSOR
2HP-1500W-50L CRM1046
AIR TOOL SET, 5PCS
ATM1036
Specifications
Mains voltage
Power input
Tank capacity
No load speed
Air displacement
Specifications
Spray gun
- Operating pressure 4.5-6 bar
- Container capacity 400 cc
230V~, 50Hz
1.500W-2HP
50L
2.850/min.
206 liter/min.
Tyre inflator with pressure gauge
- Operating pressure 0-8 bar
Air blow gun
- Recommended pressure 2-4 bar
Features
- Powerful single cylinder pump
- Pressure adjustment from 0-8 bar
- Silent direct drive induction motor
- Universal ¼” quick coupling
- 2 Manometers for tank and outlet
pressure
Includes
Optional Accessories
5m Coiled hose with DIN coupler
Connection universal / DIN
Oil
Air accessory set 6pcs ATA1025 Coiled hose 5m + couplings ATA1026
Air hose 10m + coupling ATA1027 Hose reel 9m ATA1033
PAINT SPRAY GUN
ATM1039
Specifications
Operating pressure
Container capacity
14
Cleaning gun
- Recommended pressure 2-4 bar
- 5m coiled hose with DIN coupler
- Connection universal / DIN
PAINT SPRAY GUN
ATM1040
4.5-6 bar
400 cc
Specifications
Operating pressure
Container capacity
4.5-6 bar
750 cc
With both DIN and Orion coupling
With both DIN and Orion coupling
Includes
Includes
DIN coupling - Orion coupling
DIN coupling - Orion coupling
TYRE INFLATOR
ATM1041
PNEUMATIC TACKER
ATM1042
Operating pressure
Includes
0-8 bar
DIN coupling - Orion coupling
Specifications
Operating pressure
Staple length
Staple width
Staple capacity
4-7 bar
12-25mm gauge 18
5.8mm
100 pcs
AIR BLOW GUN
ATM1050
Recommended pressure
Includes
2-4 bar
Long nozzle - Short nozzle - DIN coupling - Orion coupling
Includes
Optional Accessories
Oil - 100 Staples 25mm - DIN coupling - Orion coupling Storage case
Staples ATA1028 (1800pcs - 12mm) - ATA1029 (1300pcs - 18mm) ATA1030 (1100pcs - 22mm) - ATA1031 (1000pcs - 25mm)
AIR NAILER 50 MM
ATM1044
IMPACT WRENCH
ATM1043
Specifications
Specifications
Operating pressure
Max. nail size
Nail capacity
Includes
Optional Accessories
7 bar
1.25x1.05x50mm
100pcs
Oil - 100 Nails 20mm - 100 Nails 30mm - 100 Nails 50mm 2 Hex keys - DIN coupling - Orion coupling - Storage case
1000 Nails ATA1086 (20mm) - ATA1087 (30mm) ATA1088 (50mm)
Operating pressure
No load speed
Bolt size capacity
Max. torque
Drive shaft
Includes
6.3 bar
7.000/min
16mm
310Nm
½” square
10 Air sockets - 5” Extension bar - Oil - HEX wrench - Nipple Mini oiler - DIN coupling - Orion coupling - Storage case
15
WWW.FERM.COM
1702-14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement