Power on Wheels 12 V - LEAB Automotive GmbH
Power on Wheels
12 V
24 V
230 V 230
400
V V 400 V
Product Descriptions
1
Many Requirements – One Solution
LEAB Power Supply Systems for Commercial and Emergency Vehicles
Police, fire-fighting and emergency rescue vehicles are important resources for fulfilling increasingly demanding tasks
in an ever more complex world. The smooth functioning of
the vehicle and its ancillary equipment is a basic requirement
for reducing the stress on emergency services, enabling them
to concentrate on their main objective: to protect and save
human lives. Today‘s concepts for such vehicles place high
demands on a continuously available power supply that
guarantees the uninterrupted functioning of onboard communication, medical and signalling technology.
LEAB – which has focussed on providing specialised electrical equipment for vehicles for more than 20 years – develops,
designs and delivers all of the equipment for mobile power
supplies in emergency vehicles from a single point. However,
we do not see ourselves as a parts distributor; instead, we
offer sophisticated concepts whose reliability has been proven by years of experience and which meet today‘s practical demands. Since automotive technology and operational
tactics are continuously changing, we are also constantly
developing new solutions for optimum power supplies based
on practical application.
In accordance with the wide range of possible uses, LEAB
offers what is probably the most extensive portfolio of mobile
power supply products on the market.
LEAB products
LEAB can provide you with battery chargers from 3 A up to
hundreds of amps, 230V and 400V converters, onboard generators for 14V, 28V, 230V or 400V with an output of 2 to 100 kilowatts as well as all of the products required for a fail-safe and
standard-compliant installation.
One of LEAB’s particularly innovative fields is the successful development of a practical and safe lithium-ion battery
system as a supply battery for emergency vehicles. A unique
battery system was developed in cooperation with the
world‘s leading manufacturer of battery management
systems. From the very beginning, we focussed on a system
that is perfectly suited to everyday use while, at the same
time, fulfilling the highest safety requirements. This has made
our lithium-ion battery system the supply battery with the
highest safety concept and the most advanced solution on
the market.
Now, LEAB is presenting an in-house development for the first
time – the PowAirBox, a fast and safe system for the reliable
supply of both electrical power and compressed air to rescue
vehicles.
Since there is rarely an emergency vehicle or operational
profile that is similar to another, we can put together a
bespoke solution from our range of products that will fit your
specific needs. We will be happy to assist you: just give us a call
or send us an e-mail, or visit our website at www.leab.eu/en.
• 230 V supply up to 5,000 VA continuous,
uninterruptible
• 28 V/100 A & 28V/150 A auxiliary generators
• redundant wiring systems
• automatic mains switchover and
start prevention
• automatic ejection both electric and
pneumatic
2
Info & more:
www.leab.eu/en
All products at a glance
CONTENTS
CTC Twin Charger
4
CPC Onboard Battery Chargers
5
Champ & Champ Pro Chargers
6&7
Onboard ABC Chargers & Accessories
8&9
PWC 12-24/70 Workshop Chargers
10
Onboard Chargers TS 12/12 & TS 24/12
10
CLP G3 Sine Wave Inverters
11
CLP Combined Sine Wave Inverters/Chargers
12
Lithium-Ion Batteries
© 2014 LEAB Automotive GmbH.
All rights reserved.
All trademarks and registered trademarks
are the property of the respective owner
and must be treated as such.
Subject to technical modifications,
errors excepted.
13 & 14
Battery Management System BMS
15
G3 Display/Remote Control
15
Dynawatt 230V Power Generator according to DIN 14687
16
High-performance Generators 14V & 28V
17
Low Voltage Distribution/Electric Switch Panels
18
Underfloor Generators
19
Electronic Cut-off Relays, Bidirectional / Unidirectional
20
Undervoltage Protection Relays
21
Electronic Charging Current Distributor CDR
21
Alfatronix DC-DC Converters “Click’n’fit”
22 & 23
DC-DC Converters & Equalizers
24 & 25
PowAirBox – combined power & compressed air supply
26 & 27
Battery Monitor & Booster
28
EXIDE GEL Batteries
29
Battery Terminals, Insulators, Busbars, Fuses & Fuse Holders
Plugs & Sockets according to VG 96917 & DIN 14690
30 & 31
31
3
LEAB CTC Twin Charger
INFO
Install & charge – twice as good
The outputs of the CTC twin charger can be set separately for wet
cell, gel/AGM or traction batteries as well as for CP lithium-ion
batteries. It is suitable for all types of 12V lead batteries as well as
for CP lithium-ion batteries. Connections for a battery sensor and
ignition interlock as well as a remote display round off the extensive
features.
• 2 completely separate charging units
• charging current 2 x 30 A
• connection for 2 temperature sensors
• connection for ignition interlock
• 4 switchable charging characteristics
• suitable for lithium batteries
The new LEAB CTC 1230-2 is an innovative battery charger with two
outputs which work completely independently and can be used for
charging different types of batteries. It can be used for the reliable
charging of two 12V/30 Amp batteries. The size and shape of the new
LEAB twin charger corresponds to the familiar CPC series.
The keypad is easy to use and permits each output to be switched
separately between four different charging characteristics for standard wet cell, gel/AGM or traction batteries as well as lithium batteries. A twin LED display provides information about the respective
state of charge during charging as well as about any faults that may
occur.
The completely separate structure means that there are two independently settable and adjustable outputs available, enabling different battery types to be charged at the same time at the two outputs. Both outputs can charge batteries even better and more gently
by compensating the ambient temperature through CTS sensor
cables for temperature and voltage measurement.
NEW!
CTC 1230-2 Twin Charger
The standard rubber border around the case and the 230V connection via the Neutrik plug system are further advantages of the CTC
1230-2 twin charger.
12 V
CTC Twin Charger
Type
Art. no.
1230-2
01.010.36880
Charging characteristic
three-stage IUoU, with balancing charge IU1U2oU depending on program
Input voltage
230 V / 50 Hz, max. 8 A
Voltage range
195 … 270 VAC / 40 – 60 Hz
Charging current
2x 30 A
Ripple
< 3%
Temperature range
-25 to +40°C full power, from 40°C reduction up to 80°C
Battery types
all types of lead batteries, open and sealed, AGM, gel, traction and lithium
Battery capacity
2x 100-300 Ah
Dimensions
298 x 135 x 98 mm
IP-class/protection class
IP20/I
Weight (without cable)
2.3 kg
Charging cable
2 x Twinflex, length 1.5 m
Mains cable
2 m with Schuko plug and Neutrik plug on the charger
See page 9 for optional accessories
4
LEAB CPC Onboard Battery Chargers
INFO
Install & charge – simply good
• mains cable detachable – Neutrik connector
The renowned and extremely successful LEAB ABC series of battery
chargers is now being actively supported by models of the CPC series.
LEAB has redefined the subject of battery charging and reduced it to
the essentials – that is to say the fast, reliable and safe charging of
batteries.
• charging cable can be screwed/clamped
from the outside
• rubber border and fastening bases
• optional: temp. sensor cable/remote display
• 600W/800W equipped with switched
output CBL as a standard feature
Plug & Play:
All dimension specifications in mm.
fast installation
thanks to Neutrik
plug system
LEAB CPC 1230
12 V
CPC Chargers 12 V
CPC 600 W/ 800 W
CPC 1600 W
CPC 600 W/800 W
CPC 1600 W
Type
Art. no.
1215
01.010.36900
1220
01.010.36901
Charging curve
three-stage IUoU, with balancing charging depending on program, choice of 15 charging curves (see charging curve sheet)
Input voltage range
90 … 270 V (< 200 V reduced charging current)
Input frequency range
0 … 400 Hz
Charging current
15A
Ripple
< 3%
Temperature range
-30 … +60° C
Battery types
open and sealed lead acid, lead gel, AGM batteries
Battery capacity
50-150 Ah
Dimensions
264 x 127 x 86 mm
IP-class/protection class
IP20/I
Weight (without cable)
1.5 kg
Charging cable
Twinflex 2x 6 mm², length 1.5 m
Mains cable
1.5 m Neutrik connector / Schuko plug
20A
1230
01.010.36930
1260
01.010.36970
30A
60A
60-200 Ah
90-300 Ah
150-600Ah
1.5 kg
1.5 kg
2.2 kg
Twinflex 2x 10 mm², length 1.5 m
24 V
CPC Chargers 24 V
CPC 600 W / 800W
2420
01.010.36903
CPC 1600 W
Type
Art. no.
2415
01.010.36902
Charging curve
three-stage IUoU, with balancing charging depending on program, choice of 15 charging curves (see charging curve sheet)
Input voltage range
90 … 270 V (< 200 V reduced charging current)
Input frequency range
0 … 400 Hz
Charging current
15 A
Ripple
< 3%
Temperature range
-30 … +60° C
Battery types
open and sealed lead acid, lead gel, AGM batteries
Battery capacity
50-150 Ah
Dimensions
264 x 127 x 86 mm
IP-class/protection class
IP20/I
20 A
60-200 Ah
2430
01.010.36931
30 A
90-300 Ah
2440
01.010.36971
2450
01.010.36972
2460
01.010.36973
40 A
50 A
60 A
120-400 Ah
140-500 Ah
150-600 Ah
2.2 kg
2.2 kg
294x 135 x 95 mm
Weight (without cable)
1.5 kg
Charging cable
Twinflex 2x 6 mm², length 1.5 m
1.5 kg
Mains cable
1.5 m Neutrik connector / Schuko plug
1.5 kg
2.2 kg
Twinflex 2x 10 mm², length 1.5 m
See page 9 for optional accessories
5
LEAB Champ & Champ Pro Chargers
IP67 waterproof and dust-tight
now also available with higher output
INFO
Champ Pro chargers:
Like their predecessors, the LEAB Champ chargers of the new Pro
series in IP67 enclosures are extremely compact, light and robust as
well as fully waterproof and dust-tight. They are used to charge wet,
gel and AGM batteries fully automatically.
The chargers of the Champ Pro series can be converted to different
battery types using a keypad and can even be used as a power supply
independent of the battery.
• higher output
• state of charge display
• keypad for setting
• temperature sensor integrated in DC cable
• simple to use
NEW!
Champ Pro display
12 V
Champ Pro 1217, 1230, 2412, 2420
Champ Chargers 12V
Type
Art. no.
Charging curve
Charge current [A]
Battery capacity [Ah]
AC cable [m] / type
DC cable
DC fuse [A]
Champ 1207
01.010.33330
Gel/AGM
7
20 - 70
2 / Schuko plug
Cable shoe M8
10
Champ 1207
01.010.33315
Gel/AGM
7
20 - 70
0.2 / DEFA plug
Cable shoe M8
10
Champ 1207
01.010.33316
Wet
7
20 - 70
0.2 / DEFA plug
Cable shoe M8
10
Champ 1207
01.010.33319
Wet
7
20 - 70
2 / Schuko plug
Cable shoe M8
10
Champ 1217
01.010.33810
Gel/AGM
17
55 - 170
2 / Schuko plug
Cable shoe M8
20
Champ 1217
01.010.33811
Wet
17
55 - 170
2 / Schuko plug
Cable shoe M8
20
Champ 1217
01.010.33819
Gel/AGM
17
55 - 170
0.2 / DEFA plug
Cable shoe M8
20
Champ 1217
01.010.33820
Wet
17
55 - 170
0.2 / DEFA plug
Cable shoe M8
20
Champ 1217
01.010.33825
Gel/AGM
17
55 - 170
2 / Schuko plug
MagCode PRO*
–
Champ 1217
01.010.33826
Wet
17
55 - 170
2 / Schuko plug
MagCode PRO*
–
Champ Pro Chargers 12V
Champ 1217 Pro
01.010.43880
Wet/gel/AGM
17
Traction/power supply
55 - 170
2 / Schuko plug
Cable shoe M8
–
Champ 1230 Pro
01.010.43890
Wet/gel/AGM
30
Traction/power supply
100 - 300
2 / Schuko plug
Cable shoe M8
–
* incl. port/plug permanently attached
Technical Data
Champ 1207
Champ 1217
Characteristic curve
IU1U2, pre-assigned, cannot be changed
Input voltage [V]/[HZ]
230 / 40 - 60
Champ 1217 Pro
Champ 1230 Pro
U1U2, pre-assigned, choice of 4 charging curves
Min. / max. input voltage [V]
90/ 270
195/ 270
195/ 270
195/ 270
DC cable [m]
1.5x1.5mm2
1.5x2.5mm2
1.5x2.5mm2
1.5x6mm2
Temperature sensor
–
–
integrated
integrated
Temperature range [°C]*
-30 to +55
-30 to +55
-25 to +70
-25 to +70
Cooling
convection
IP-class/protection class
IP 67/I
Weight [kg]
1.1
1.4
1.6
1.9
Dimensions [mm]
155 x 80 x 43
192 x 98 x 47
192 x 98 x 47
192 x 98 x 47
Short-circuit proof
yes
Reverse voltage protection
yes
Mark of conformity
CE
*reduced current from 40°C
6
LEAB Champ chargers are provided with different connecting plug
systems such as the magnetic MagCode PRO plug, the DIN 14690 plug
or the DEFA plug directly from LEAB. 115 V versions are available on
request.
INFO
Champ Chargers:
• sturdy, light & compact
These compact and sturdy chargers are particularly suitable as
onboard chargers in emergency doctors’ vehicles, for example.
• IP67 waterproof and dust-tight
• charging of cyclically operated batteries
• maintenance charging for starter batteries
• charging characteristic IU1U2
permanently set
• with different DC & AC connector plugs
available
Champ 1207
with DEFA connection
Further
models:
www.leab.eu/en
Champ 2405
GEL/AGM
24 V
MagCode
Pro-system
Cable shoes
M8
Champ 2412
Wet battery
DIN 14690
plug
DEFA plug
Champ Chargers 24V
Type
Art. no.
Charging curve
Charge current [A] Battery capacity [Ah]
AC cable [m] / type
DC cable
DC fuse [A]
Champ 2405
01.010.33351
Gel/AGM
5
15 - 50
1.5 / Schuko plug
Cable shoe M8
10
Champ 2412
01.010.33850
Gel/AGM
12
25 - 120
1.5 / Schuko plug
Cable shoe M8
20
Champ 2412
01.010.33852
Gel/AGM
12
25 - 120
0.2 / DEFA plug
Cable shoe M8
20
Champ 2412
01.010.33854
Wet
12
25 - 120
1.5 / Schuko plug
Cable shoe M8
20
Champ Pro Chargers 24 V
Champ 2412 Pro
01.010.43881
Wet/gel/AGM
Traction/power supply
12
40 - 120
2/ Schuko plug
Cable shoe M8
–
Champ 2420 Pro
01.010.43891
Wet/gel/AGM
Traction/power supply
20
65 - 200
2/ Schuko plug
Cable shoe M8
–
Technical data
Champ 2405
Champ 2412
Charging curve
IU1U2, pre-assigned, cannot be changed
Input voltage [V]/[HZ]
230 / 40 - 60
Champ 2412 Pro
Champ 2420 Pro
U1U2, pre-assigned, choice of 4 charging curves
Min. / max. input voltage [V]
90/ 270
170/ 270
195/ 270
195/ 270
DC cable [m]
1.5x1.5mm2
1.5x2.5mm2
1.5x2.5mm2
1.5x6mm2
Temperature sensor
–
–
integrated
integrated
Temperature range [°C]*
-30 to +55
-30 to +55
-25 to +70
-25 to +70
Cooling
convection
IP-class/protection class
IP 67/I
Weight [kg]
1.1
1.4
1.6
1.9
Dimensions [mm]
155 x 80 x 43
192 x 98 x 47
192 x 98 x 47
192 x 98 x 47
Short-circuit proof
yes
Reverse voltage protection
yes
Mark of conformity
CE
*reduced current from 40°C
7
LEAB Onboard ABC Chargers
INFO
Selecting the Right Charger
• numerous basic models available
Most battery manufacturers recommend a charging capacity for
their batteries of 10 to 30 % of the battery‘s nominal capacity (Ah). For
this reason, automatic chargers are specified for a certain range of
battery sizes.
• IU1U2 charging characteristics can be set
• multi-coloured LED lights indicate
charging status
• handles major deviations in incoming
voltage
However, some applications such as hand-held lamps, radios, DC
chargers, refrigerators, lights, etc., require operational feed while
charging the battery. This means that part of the charging power is
diverted and effectively reduced. This consumption must be taken
into account when determining the loading capacity so as to achieve
a charge that is fast, sufficient and protects the battery.
• reliable charge
NEW:
ABC 12100 now
also in more
compact design
ABC 1215, ABC 1220, ABC 1230, ABC 1240, ABC 1250
ABC 1230, protection class II, ABC 1260, ABC 12100
ABC 1280, ABC 12120
12 V
ABC Chargers 12 V
Type
Art. no.
Charge current [A]
Bat. capacity [Ah]
IP-class/ protection class
Sensor / ext.LED
L x W x H [mm]
Weight [kg]
DC cable [m] / [mm²]
ABC 1215
01.010.36115
15
40 - 150
IP 21 / I
option / option
220 x 112 x 73
1.5
2/2x6
ABC 1220
01.010.36120
20
50 - 200
IP 21 / I
option / option
220 x 112 x 73
1.5
2/2x6
ABC 1230
01.010.36130
30
75 - 300
IP 21 / I
option / option
220 x 112 x 73
1.5
2/2x6
ABC 1230-II
01.012.36130
30
75 - 300
IP 21 / II
option / option
240 x 135 x 85
2.0
2/2x6
ABC 1230 IP44
01.010.36135
30
75 - 300
IP 44 / I
–/–
220 x 112 x 73
1.5
2/2x6
ABC 1230 CBL*
01.010.36134
30
75 - 300
IP 21 / I
option / option
220 x 112 x 73
1.5
2 / 2 x 10
ABC 1240
01.010.36140
40
100 - 400
IP 21 / I
option / option
220 x 112 x 73
1.5
2 / 2 x 10
ABC 1240 CBL*
01.010.36144
40
100 - 400
IP 21 / I
option / option
220 x 112 x 73
1.5
2 / 2 x 10
ABC 1250
01.010.36160
50
125 - 500
IP 21 / I
option / option
220 x 112 x 73
1.5
2 / 2 x 10
ABC 1260
01.010.36170
60
150 - 600
IP 21 / I
option / option
265 x 135 x 85
2.6
2 / 2 x 10
ABC 12100
01.010.36178
100
250 - 1000
IP 21 / I
option / option
265 x 135 x 85
2.9
2 / 2 x 25
ABC 1280
01.010.36180
80
200 - 800
IP 21 / I
option / –
415 x 255 x 90
9.6
2 / 2 x 25
ABC 12120
01.010.36186
120
300 - 1200
IP 21 / I
option / –
415 x 255 x 90
9.6
2 / 2 x 35
*with relay output 3A
Technical Data ABC Chargers 12 V & 24 V
Charging curve
IU1U2 preassigned, 16 charging curves stored in E-Prom
Input voltage [V]/[HZ]
230 / 40 - 60
Min. / max. input voltage [V]
90 / 260 (< 200VAC reduced power )
AC-cable [m]
1.5 with Schuko plug
Temperature range [°C]
-25 to +55
Cooling
temperature-controlled fan
Short-circuit proof
yes
Inverse polarity protection
yes
Norms
EN 60335-2-29, EN 55022 B, EN 61000-3-2, EN 61000-4-2, EN 61000-4-4, EN 61000-4-11, ENV 50140, ENV 50204, DIN 14679
Mark of conformity
CE
See page 9 for optional accessories
8
INFO
• ABC chargers also available in
36 V & 48 V versions: www.leab.eu
ABC 2415, ABC 2420, ABC 2430, ABC 2430 CBL
• ABC chargers for the charging of
– lithium-polymer- /
– lithium-ion batteries available
on request
ABC 2440, ABC 2450, ABC 2460
For
power supplies
APD & APP:
www.leab.eu/en
24 V
ABC 2480, ABC 24100, ABC 24125
ABC Chargers 24 V
Type
Art. no.
Charge current [A]
Bat. capacity [Ah]
IP-class/ protection class
Sensor / ext.LED
L x W x H [mm]
Weight [kg]
DC cable [m] / [mm²]
ABC 2415
01.010.36015
15
40 - 150
IP 21 / I
option / option
220 x 112 x 73
1.5
2/2x6
ABC 2420
01.010.36020
20
50 - 200
IP 21 / I
option / option
220 x 112 x 73
2.0
2/2x6
ABC 2420 IP44
01.010.36220
20
50 - 200
IP 44 / I
–/–
350 x 176 x 83
2.0
2/2x6
ABC 2420-II
01.012.36020
20
50 - 200
IP 21 / II
option / option
240 x 135 x 85
2.0
2/2x6
ABC 2425 IP44
01.010.36225
25
60 - 250
IP 44 / I
–/–
350 x 176 x 83
2.2
2/2x6
ABC 2430
01.010.36030
30
75 - 300
IP 21 / I
option / option
220 x 112 x 73
1.5
2/2x6
ABC 2430 CBL*
01.010.36034
30
75 - 300
IP 21 / I
option / option
220 x 112 x 73
1.5
2/2x6
ABC 2430-II
01.012.36030
30
75 - 300
IP 21 / II
option / option
240 x 135 x 85
2.0
2/2x6
ABC 2440
01.010.36040
40
100 - 400
IP 21 / I
option / option
265 x 135 x 85
2.6
2 / 2 x 10
ABC 2450
01.012.36050
50
125 - 500
IP 21 / I
option / option
265 x 135 x 85
2.6
2 / 2 x 10
ABC 2460
01.010.36060
60
150 - 600
IP 21 / I
option / option
265 x 135 x 85
2.6
2 / 2 x 16
ABC 2480
01.010.36080
80
200 - 800
IP 21 / I
option / –
420 x 255 x 86
9.6
2 / 2 x 35
ABC 24100
01.010.36100
100
250 - 1000
IP 21 / I
option / –
420 x 255 x 86
9.6
2 / 2 x 35
ABC 24125
01.010.36110
125
310 - 1250
IP 21 / I
option / –
420 x 255 x 86
9.6
2 / 2 x 35
*with relay output 3A
Further
accessories:
www.leab.eu/en
Accessories for ABC & CPC Chargers
Accessories for
ABC chargers
Sensor cable for
temperature & voltage
Sensor cable for
temperature
Remote display
Type
Art. no.
CTS-2.5
16.010.35593
TS-3.1
16.010.36708
ABC-display**
14.010.36720
ABC-display**
14.010.36730
Description
sensor cable ABC charger with 3A fuse
temperature sensor cable for ABC charger remote display
5m cable
flush installation
remote display
12m cable
flush installation
Length/dimensions
2.5m*
3.0m*
50x50x2.4mm
50x50x2.4mm
Measuring function
temperature & voltage
temperature
3-colour LED charging status
* other lengths on request **compatible for all ABC, CPC & CTC devices except for ABC chargers in IP44 / protection class II / 3.2 kW
9
LEAB PWC 12-24/70 Workshop Chargers
INFO
Unlimited Energy for the Workshop
• autom. 12 V / 24 V voltage recognition
Easy handling, automatic recognition of the battery voltage, moulded
200A charging clips and a one-key menu for switching between wet/
gel/AGM or calcium batteries – that’s all you need to charge batteries
quickly, safely and with all possible care. An all-round rubber border
protects the vehicle paintwork and makes it more difficult for the
workshop charger to slip off the vehicle.
• power supply function 13.7 V –
even without the battery connected
• can be switched to battery type
• LED battery state of charge display
NEW!
Workshop Charger PWC 12-24/70
PWC 12-24/70
Art. no.
01.010.36830
Battery types
wet/gel/AGM batteries
Charging characteristic
IUoU
Rec. battery capacity
40 - 1,000 Ah
Charging current, max. 70 A for 12 V / 60 A for 24 V
70 A at 12 V / 60 A at 24 V
Accessories & Spare Parts
Standard
AGM/gel
Type
Art. no.
Charging voltage main charging [VDC]
14.7 / 29.4
14.4 / 28.8
Charging cable 2x 10 mm² 1.5 m w. terminal clips 200 A / 0.7kg*
16.003.60063
Charging voltage maintenance charging [VDC]
13.8 / 27.6
13.8 / 27.6
Charging cable 2x 10 mm² 5 m w. terminal clips 200 A/ 1.9kg* *
16.003.60064
Input voltage (nominal values) [V/Hz/A]
230 / 50 / 8
Charging cable 2x 10 mm² 1.5 m w. terminal clips
temperature sensor / 1.0kg*
16.003.60065
Input voltage range/frequency range [V/Hz]
90 … 270/ 0 … 400
Standby current (from the battery) [mA]
<2
Mains cable 1.5 m Neutrik connector / Schuko plug D / 0.2kg
16.010.01122
IP-class/protection class
IP 20/I
Mains cable 1.5 m Neutrik connector / Mains plug CH / 0.2kg
16.010.01123
Operating temperature range [° C]
-20 … +50
Neutrik connector NAC3FCA blue, single (set)/ 0.1kg
02.059.000
Housing dimensions (L x W x H) [mm]
294 x 135 x 94.5
Weight (without cable) [kg]
2.2
* included in scope of supply
** other lengths on request
LEAB Onboard Chargers TS 12/12 & TS 24/12
Charge Generators & Portable Pumps using Onboard Power Supply
Portable pumps and fire service generators with their own
starter batteries will only start up reliably if the batteries are
charged regularly. LEAB TS onboard chargers are used for
the automatic charging of 12V batteries for generators and
portable pumps using the 12V or 24V onboard power supply
– depending on the vehicle type. A helix charging cable, preassembled with MagCode or plug connection according to
DIN 14690 as required, makes flexible use possible.
INFO
• waterproof in
accordance with IP65
• sturdy metal casing
• straightforward
installation
• overvoltage &
overheating protection
Charger TS 12
Onboard Chargers TS 12/12 & TS 24/12
Type
Art. no.
TS12/12-03
04.312.12039
TS24/12-06
04.324.12065
TS12/12-03
04.312.12040
TS24/12-06
04.324.12066
Input voltage
10 - 15 VDC
17 - 32 VDC
10 - 15 VDC
17 - 32
VDC Output voltage
13.6 VDC (-20% / +15%)
6 A / 10 A
3A/4A
6 A / 10 A
Permanent/peak load*
3A/4A
Standby current
<15 mA
Cable input
1m
Cable output
helix cable 1.0 - 3.5 m / MagCode plug
helix cable 1.0 - 3.5 m / plug in accordance with DIN 14690
Dimensions
108 x 91 x 52 mm
108 x 91 x 52 mm
Weight without cable
0.37 kg
0.37 kg
Operating temperature
-25 to +30°C
Marks of conformity for the converter
CE; E
* max. 2 Min.
10
CLP G3 Sine Wave Inverters
INFO
Plug & play Plug System for Safe Installation
• pure 230VAC sine wave current
CLP G3 sine wave inverters and combi units are designed with
switch mode power supply technology. This makes them compact
and light, making installation in mobile applications significantly easier. A protective coating increases the boards’ resistance to
humidity.
• compact, light, powerful
• full power output from -20° to +50°C
The Neutrik plug system makes installation as easy as plugging a
device into a socket. The automatic locking mechanism prevents the
plug loosening due to vehicle vibrations.
Further
selection of
inverters:
www.leab.eu
Two different CLP DC universal cable sets (medium/large) are available as accessories, for connection to the existing or new consumer
battery. All CLP G3 inverters and combi units are compatible with
lithium and lead battery systems and have E-marking.
G3 Display/Remote Control
The G3 display/remote control is an optional accessory which can
be used to control and monitor up to 6 combi units or inverters. It
can also be used for the automatic switching of a generator. The
wide range of remote control
functions for use with CP
lithium batteries is described
on page 15.
Undervoltage, switched output
& overvoltage display
G3 CLP display/remote control
12 V
CLP G3 Inverter
1512, 1524, 2012, 2324
24 V
CLP G3 Inverter
1012, 1024, 1312
CLP G3 Inverters 12 V / 24 V
Type
Art. no.
CLP 1012
02.053.10120
CLP 1312
02.053.13120
CLP 1512
02.053.15120
CLP 2012
02.053.20120
CLP 1024
02.053.10240
CLP 1524
02.053.15240
CLP 2324
02.053.23240
Nominal voltage of the battery [V]
12
12
12
12
24
24
24
Input voltage range [VDC]
10.5 - 15.0
10.5 - 15.0
10.5 - 15.0
10.5 - 15.0
21.0 - 30.0
21.0 - 30.0
21.0 - 30.0
Continuous power at 50 °C [VA]
1000
1300
1500
2000
1000
1500
2300
Overload [VA]
2000
2600
3000
4000
2000
2800
4500
Max. efficiency [%]
90
Output voltage [V]
230
Min. / max. output voltage
-10% to +5%
Wave mode
pure sine wave
Frequency [VAC/Hz]
50
Search mode [W]
<2
Sleep mode [mA]
<5
Operating temperature range [°C]
-20 to +50
Dimensions incl. connections [mm]
334 x 198 x 116
334 x 198 x 116
412 x 198 x 116
412 x 198 x 116
334 x 198 x 116
412 x 198 x 116
412 x 198 x 116
Casing
anodised aluminium
IP-class/protection class
IP21/II
Weight [kg]
7.5
7.5
9.5
9.5
7.5
9.5
9.5
AC connection
Neutrik NAC3FCB
DC connection
screw terminals
Mark of conformity
CE, E
See page 15 for optional accessories
11
CLP Combined Sine Wave Inverters/Chargers
INFO
• battery charging
• pure 230VAC sine wave current
• autom. switching mains / battery
• full power output from -20° to +50°C
Plug & Play:
fast installation
thanks to Neutrik
plug system
CLP Combi Unit
1512-80, 2012-100, 2324-50
12 V
Delivery includes a Neutrik plug
for fast, easy & safe installation.
CLP Combi Unit
1012-50, 1024-30, 1312-80
24 V
CLP Inverters / Combined Chargers 12V / 24V
Type
Art. no.
CLP 1012-50
02.051.01250
CLP 1312-80
02.051.31280
CLP 1512-80
02.051.51280
CLP 2012-100
02.052.01210
CLP 1024-30
02.051.02430
CLP 2324-50
02.052.32450
Nominal voltage of the battery [V]
12
12
12
12
24
24
Input voltage range [VDC]
10.5 - 15.0
10.5 - 15.0
10.5 - 15.0
10.5 - 15.0
21.0 - 30.0
21.0 - 30.0
Continuous power at 55 °C [VA]
1000
1300
1500
2000
1000
2300
Overload [VA]
2000
3000
3000
4000
0000
3000
Max. efficiency [%]
90
Output voltage [V]
230
Min. / max. output voltage
-10% to +5%
Wave mode
pure sine wave
Frequency [Hz]
50
Search mode [W]
<2
Sleep mode [mA]
<5
Operating temperature range [°C]
-20 to +50
334 x 198 x 116
412 x 198 x 116
412 x 198 x 116
334 x 198 x 116
412 x 198 x 116
7.5
9.5
9.5
7.5
9.5
Dimensions incl. connections [mm]
334 x 198 x 116
Casing
anodized aluminium
IP-class/protection class
IP21/II
Weight [kg]
7.5
AC connection
Neutrik NAC3FCB
DC connection
screw terminals
Mark of conformity
CE, E
Technical Data Battery Charger
Charging current [A] adjustable
0 - 50 | 0 - 30
0 - 80
0 - 80
0 - 100 | 0 - 50
14.4 /13.5
14.4 / 13.5
14.4 / 13.5 | 28.8 / 27.0
Charging voltage* [V]
14.4 / 13.5 | 28.8 / 27.0
Charging characteristic*
IU1U2
Input voltage range AC [V]
185 - 265
Input frequency range [Hz]
45 - 65
Protection class
I
Efficiency [%]
90
* can be programmed individually
12
See page 15 for optional accessories
Powerful & Effective in Permanent Use
Lithium-Ion Batteries
INFO
Why an LEAB CP lithium-ion battery is
the better solution for emergency vehicles
• can be charged in 50 minutes
• 1/3 of the weight*
• 1/3 of the space requirement*
There is one vital factor that matters in rescue work – reliability.
Over the past few years, numerous electrical consumers have been
integrated in rescue vehicles, worsening their energy balance and
leading to vehicles not being able to be used or having to be taken
out of service unplanned and at short notice due to faulty or flat
batteries.
• 10-times the service life*
• higher cost effectiveness
• greater efficiency
• emission-free
Conventional lead batteries, no matter whether these are of the
AGM, gel or wet type, are not able to provide sufficient current
for today’s equipment requirements, particularly since the physical characteristics of these types of batteries do not permit fast
charging within a very short time. In addition, there is no room for
larger batteries in the vehicle, not to mention the very heavy
weight of lead batteries.
* compared with conventional lead batteries
(discharged to 80 %)
As with all modern vehicles, you don’t want to know how much fuel
is still in the tank but rather how far it will take you or how much
longer you will be able to work. With the CP lithium-ion battery
you are informed about the residual battery capacity range.
12V – 100Ah
192
301.4
274
Providing the power supply has been designed correctly, emergency vehicles can work almost independently without any external
supply being necessary. The display of the lithium system provides
constant information, including about when the battery is fully charged again. If the battery should become completely discharged, it
only takes 50 minutes for it to be completely recharged.
The system installation couldn’t be easier: battery, display, charging current distributor. Measuring resistors, relays, bus systems,
sensors and other potential sources of error are not required.
296.5
If emergency vehicles are connected to the mains supply less
often because the “onboard” power supply has been designed more
efficiently and in line with modern requirements, so that vehicles
can operate more or less independently, efficiency is significantly
increased, costs are reduced and supply is more reliably guaranteed.
192
558
275
All these factors make the LEAB CP lithium system into a unique
and tailor-made solution for vehicles used by authorities and
rescue organisations.
24V – 100Ah
All dimension specifications in mm.
13
Energy for Working at All Times
Lithium-ion Battery Systems for Commercial Vehicles
INFO
• 12 V/100 Ah lithium battery
with integrated BMS
• Phoenix connector plug
• data connection cable
• parallel connection of max.
20 batteries possible
Example of connection:
Remote display/control
G3 inverter/battery charger
12 V DC output
PCM electric switch panel
230 V AC input
CDR charging current
distributor
12V – 200Ah Lithium-ion battery
12 V
230V AC output
Generator
Starter battery
24 V
CLAYTON POWER Lithium Systems
CLAYTON POWER Lithium Systems
Type
Art. no.
Lithium Power Pack 12V / 100Ah
012-00002GF
Type
Art. no.
Lithium Power Pack 24V / 100Ah
012-00004GF
Capacity [Ah]
100
Capacity [Ah]
100
Nominal voltage [V] DC
12
Nominal voltage [V] DC
24
Lower voltage limit [V] DC
9.2
Lower voltage limit [V] DC
18,4
Upper voltage limit [V] DC
15
Upper voltage limit [V] DC
30
Permanent discharge current [A]
100
Permanent discharge current [A]
100
Peak discharge current (5 sec.) [A]
500
Peak discharge current (5 sec.) [A]
500
Cycles (at 80% depth of discharge)
3000
Cycles (at 80% depth of discharge)
3000
Permanent charging current [A]
100
Permanent charging current [A]
100
Peak discharge current (5 sec.) [A]
500
Peak discharge current (5 sec.) [A]
500
Parallel connection
1 to 20
Parallel connection
1 to 20
IP-class
IP20
IP-class
IP20
Dimensions [mm]
274 x 192 x 558
Dimensions [mm]
274 x 192 x 558
Weight [kg]
38
Weight [kg]
38
Marks of conformity
CE, E13
Marks of conformity
CE, E13
See page 15 for optional accessories
14
Battery Management System BMS
The Safest and Most Efficient Control System for Lithium-ion Batteries
The BMS stands for a long life span for the lithium-ion-battery system, safe functioning of the system as well as the
exact measurement of the state of charge (SOC).
The Battery Management System (BMS)
continuously monitors and measures all input and
output power.
Problems with lithium-ion batteries often result
from overcharging – this does not happen with a BMS.
The BMS knows that the difference between
a fully charged and a practically discharged lithium
cell is merely 0.125V.
The BMS knows that all of the measurement data
is dependent on the time and temperature.
The BMS knows that the difference between a
lithium cell in idle mode and a cell that has been
discharged at 0.5 C is merely 0.2 V.
The BMS uses complex and tested algorithms
to calculate the state of charge (SOC) to a highly
exact figure.
Active cell balancing alone does not guarantee
that individual cells are evenly charged; the BMS does.
The precise calculation of the state of charge (SOC)
protects the lithium-ion battery system from total
discharge.
The BMS interrupts charging if overcharged to prevent
the lithium-ion battery from being overloaded.
The BMS immediately shuts down if there is a short
circuit. After the problem has been eliminated, the
system can be restarted manually.
G3 Display/Remote Control
Everything under Control
A simple connection is all that’s required for easy monitoring and
operation of standard lead battery systems as well as lithium-ion battery
systems using the G3 display/remote control. The display has the following
functions:
Control &
Lithium-ion battery system
regulation of up
to 6 combi units or
• Operation (on/off)
G3 inverters
• Live display: battery current (charging/discharging)
• Live display: 230 V power output
• Live display: State of charge, remaining run time
(charging/discharging)
• Connection cable 5 m: ACWO0074GF
• Up to six G3 inverters or combi units can be connected
• Supply voltage 8-35 VDC
• Power consumption <5 mA in standby mode (without background lighting)
Type
G3 Display/Remote Control
* without cable
G3 CLP display/remote control
Lead battery system
• Operation (on/off)
• Live display: battery current
(charging/discharging
• Live display: battery voltage
• Live display: 230˘V power output
Art. no.
Voltage [V]
Current measurement
Dimensions [mm]
Weight [kg]
02.006.00001
12/ 24
Hall effect
37 x 43.8 x 88
0.26 *
15
The Advantageous Choice
INFO
Dynawatt 230 V Power Generator according
to DIN 14687
• use of the existing vehicle engine as a drive
• no separate drive required – reducing
weight, noise & costs
Special-purpose vehicles for the fire brigade and rescue services,
police force and customs require a reliable and high-capacity power supply to fulfil the increasingly complex tasks they face. LEAB
offers a wide range of onboard power generators for these requirements: from auxiliary alternators in compact state-of-the-art designs
through speed-independent Dynawatt generator systems through
to compact and powerful underfloor generators with up to 50,000 VA
power.
The Dynawatt generator systems comply with the current standard
DIN 14687 for “built-in power generators up to 12kVA”.
Control Unit DW 4000
• advantages compared with power unit:
less fuel consumption, emissions & noise
• works independently of the onboard
power supply
• safe separation of
extra-low & low voltage
Generator type P.30026E for DW 5000
Control Init DW 5000
230 V
Dynawatt Generators
Type
Art. no.
P-30016A-10
03.010.14501
P-30026C-10
03.010.15100
P-30026E-10
03.010.15200
Designation
Generator Dynawatt 4000
Generator Dynawatt 5000
Generator Dynawatt 5000
Output voltage [V]
3 x 250
3 x 250
3 x 250
Continuous speed [rpm]
15000
14000
15000
Max. speed [rpm]
18000
16000
18000
Dimensions [mm]
185 x 200
235 x 228
168 x 185
Weight [kg]
8.3
9.6
9.0
Connection cable [m]
10
10
10
Efficiency [%]
96
96
96
Temperature range [°C]
-25 to +80
-25 to +85
-25 to +85
Cooling
fan
fan
fan
IP-class
IP45
IP45
IP45
Marks of conformity
CE
CE
CE
Dynawatt Control Units
Type
Art. no.
P-32309
03.010.14150
P-52305
03.010.14200
Designation
Control unit Dynawatt 4000
Control unit Dynawatt 5000
Output voltage [V]
230
230
Frequency [Hz]
50
50
Wave shape
pure sine
pure sine
Dimensions L x W x H [mm]
390 x 260 x 110
420 x 260 x 70
Weight [kg]
7.5
8.0
Efficiency [%]
96
96
Temperature range [°C]
-25 to +60
-25 to +60
Protection against short-circuit/
overload/excess temperature
yes
yes
Over- and undervoltage protection yes
yes
Cooling
fan
fan
IP-class
IP21
IP21
Marks of conformity
CE
CE
16
LEAB Generators – Ensuring Technology Works!
High-performance Generators 14V & 28 V
A dependable synchronous 3-phase alternator is the power station of
a vehicle. Even when the engine is idling, it supplies all of the auxiliary
components with electric power and charges the starter battery.
Today‘s basic equipment includes 14 V generators with a charging
current of 90 to more than 200 A and 28 V generators with 55 to 100 A.
They are driven almost exclusively by V-belts: depending on the engine,
either by poly V ribbed belts or by simple V belts.
Info & more:
For auxiliary alternators www.leab.eu/en
and 230 V generators,
LEAB has developed a
range of mounting kits
for the most popular
types of vehicles.
Auxiliary Generator 14 V/150 A
14 V
Auxiliary Generator 28 V/100 A
28 V
Auxiliary Generators 14 V and 28 V
Type
Art. no.
14V/150A
03.112.15011
14V/200A
03.112.20010
14V/220A
03.112.22010
28V/80A
03.124.80500
28V/100A
03.128.10500
Output voltage [V]
14
14
14
28
28
Nominal current [A]
150
200
220
80
100
Max. speed [rpm]
20000
20000
20000
20000
20000
Axle diameter [mm]
17
17
17
17
17
Axle thread
M16x1.5
M16x1.5
M16x1.5
M16x1.5
M16x1.5
Weight [kg]
7.3
7.3
7.3
9.5
9.5
Electronic control unit
yes; standard
yes; LIN bus
yes; LIN bus
yes; multifunctional
yes; multifunctional
Connection
B+, D+, W
Compact plug,
2-pole, without W
Compact plug,
2-pole, without W
Compact plug,
5-pole
Compact plug,
5-pole
Temperature range [°C]
-40 to +110
-40 to +110
-40 to +110
-40 to +110
-40 to +110
Cooling
fan
fan
fan
fan
fan
IP-class
IP21
IP21
IP21
IP54
IP54
Mark of conformity
CE
CE
CE
CE
CE
17
Low Voltage Distribution/
Electric Switch Panels
INFO
• ideal sub-distributor for single-phase
alternating current systems in vehicles
• fast installation in emergency vehicles
• earth leakage circuit breaker as standard
• numerous socket combinations and mains
priority switches available
PCM 53-14687
PCM 4 PowerCon2
230 V
Electric Switch Panels PCM 4
Type
Art. no.
PCM 4
15.01035006
Voltage [V]
230
PCM 4 Relais
15.01035013
PCM 4 PowerCon
15.01035011
PCM 4 PowerCon2
15.01035014
PCM 4 PowerCon2 Relais PCM 4-NVS
15.01035004
15.01035015
230
230
PCM 4 DEFA
15.02035005
PCM 4 DEFA
15.02035006
230
230
230
230
230
Personal protection
1 x FI 30mA
1 x FI 30mA
1 x FI 30mA
1 x FI/LS
1 x FI 30mA
Cable protection, 2-pole
1 x B16
1 x B10
1 x B16
1 x FI/LS
1 x B16
Earth leakage circuit
breaker, 2-pole
1 x FI/LS
30mA/B16
2 x FI/LS 30mA/B16 2 x FI/LS 30mA/B16
Output type
1 x Neutrik
2 x Neutrik
2 x Neutrik
Cable output length [m]
Input type
1 x Neutrik
2 x Neutrik
2 x Neutrik
DEFA
Cable input length [m]
Additional relay
Casing
1 x 1S/1Ö
1 x 1S/1Ö
2 x 1S/1Ö
DEFA
H05VV-F
0.5
0.5
DEFA
DEFA
0.5
0.5
1 x 1S/1Ö
plastic
IP-class
IP65
IP20
IP20
IP20
IP65
Dimensions:
W x H x D [mm]
100 x 150 x 90 125 x 200 x 120
IP65
125 x 200 x 120
125 x 200 x 120
125 x 200 x 120
125 x 200 x 120 100 x 150 x 90
125 x 200 x 120
Application (example)
protection
for supply
protection for
CLP inverter
protection for
CLP Combi Unit
protection for
CLP Combi Unit
+ start block
protection
protection
for supply +
for supply +
mains priority mains priority
protection for
supply
protection
for supply
+ start block
IP44
IP44
Electric Switch Panels PCM 6, 8 and 10
Type
Art. no.
PCM 6i PowerCon
15.010.35130
Voltage [V]
230
Personal protection
PCM 6 PowerCon
15.010.35010
PCM 8
15.010.35007
PCM 8 NVS
15.010.35005
PCM 10
15.010.35008
PCM 10 time
15.010.35018
230
230
230
230
230
1 x FI 30mA
1 x FI 30mA
1 x FI 30mA
1 x FI 30mA
1 x FI 30mA
1 x B16
2 x B16
2 x B16
2 x B16
2 x B16
Cable protection, 1-pole
Cable protection, 2-pole
Earth leakage circuit breaker, 1 x FI/LS 30mA/B16
2-pole
Additional function
ISO-monitor
mains priority
Output type
2 x Neutrik
2 x Neutrik
3 x Neutrik
2 x Neutrik
2 x Neutrik
2 x Neutrik
Cable output length [m]
Input type
Cable input length [m]
Additional relay
2 x 1S/1Ö
1 x 2S/2Ö
Casing
Plastic
Plastic
1 x 2S/2Ö
Plastic
Plastic
Plastic
Plastic
IP-class
IP20
IP20
IP65
IP65
IP65
IP65
Dimensions L x W x H [mm]
200 x 200 x 130
200 x 200 x 130
200 x 200 x 130
200 x 200 x 130
200 x 200 x 130
200 x 200 x 130
Application (example)
protection for supply
+ ISO-monitoring CLP
Combi Unit
protection for supply
+ mains priority
CLP G3 Inverter
protection for supply
protection for supply
+ additional consumers + consumers + mains
priority circuit
protection for supply
+ consumers +
manual circuit
protection for supply +
consumers +
automatic circuit
18
Convenient Power
INFO
LEAB Underfloor Generators
• Certificates of Conformity
(CoC) from Daimler & Volkswagen
Ideal electric power providers for service and workshop vehicles
used by craftsmen, industrial and private companies as well as
municipalities and public authorities.
• Output ranges:
7 to 100 kVA at 400 V
• save on weight, space & fuel
• lower emissions
LEAB underfloor generators are available for all transporters with a
power take-off, such as the VW Crafter, MB Sprinter and Iveco Daily, as
well as for most trucks from 7.5 to over 40 tons with an output of up to
100 kW.
• also for Euro 6!
Underfloor generator with mounting kit, drive shaft and vehicle frame
Mounting kits
& switch cabinets
on request and at:
www.leab.eu/en
Plastic switch cabinet
acc. to GW 308
Underfloor generator, size 132 (7kVA to 25kVA)
Fire brigade switch cabinet
acc. to DIN 14686
LEAB Underfloor Generators
Type
Art. no.
Size
UF7000
03.040.73030
132
Power 3ph.
400V [kVA]
–
Power 1ph. [kVA]
230V [kVA]
7
Number of terminals
2
Weight
[kg]
53
UF7000
03.040.73010
132
–
7
4
71
UF9000
03.040.73035
132
9
5
2
53
UF10000
03.040.73015
132
10
6
4
73
UF15000
03.040.73040
132
15
7
2
74
UF15000L
03.040.73020
132
15
7
4
92
UF20000
03.040.73045
132
20
10
2
93
UF20000L
03.040.83010
160
20
10
4
131
108
UF25000
03.040.83030
132
25
12
2
UF20000
03.310.05072
132
20
20
2
93
UF25000L
03.040.83015
160
25
12
4
159
UF35000
03.040.83040
160
35
15
2
153
UF35000L
03.040.83020
160
35
15
4
201
UF40000
03.040.83050
160
40
20
2
190
UF50000
03.040.83060
160
50
20
2
203
UF50000
03.040.73047
250
50
20
4
265
UF80000
03.040.83080
250
80
35
4
340
UF100000
03.040.83100
250
100
50
4
415
19
Switching and Distribution
INFO
Electronic Cut-off Relays,
Bidirectional / Unidirectional
Bidirectional:
• automatic charging of 2 batteries or
battery banks
• automatic switching between the
two charging sources
Unidirectional:
• simultaneous charging of one or more
batteries
• parallel switching of the batteries
with separate circuits
EDR 1275,
EDR 2450
SP 1314-100, SP 1315-100,
SP 1318-100, SP 1319-100
SP 1314-200, SP 1315-200,
SP 1318-200, SP 1319-200
12 V
12 V Unidirectional Relay
12 V Bidirectional Relay
Type
Art. no.
EDR 12-75
13.011.71411
SP 1314-100
13.040.11314
SP 1314-200
13.040.21314
SP 1315-100
13.040.11315
SP 1315-200
13.040.21315
Min. / max. input voltage [V]
9 - 16
Terminal voltage [V]
12.8
Switching voltage [V]
13.5
13.2
Continuance [A]
75
Overload / 1s [A]
250
100
200
100
200
300
300
300
Standby consumption / on [mA / A]
1/ 0.28
600
3/ 0.7
10/ 1.5
1.8/ 0.75
Relay function
n.o. contact
10/ 1.5
Flange
side
base
side
base
side
Additional function
none
emergency start,
control output
Operating temperature range [°C]**
-20 to + 60
-40 to +85
Weight [g]
115
265
840
450
450
Dimensions L x W x H [mm]
75 x 32 x 50
66 x 66 x 80
105 x 86 x 98
66 x 66 x 80
105 x 86 x 98
** sufficient ventilation required at place of installation
24 V
24 V Unidirectional Relay
24 V Bidirectional Relay
Type
Art. no.
EDR 24-50
13.011.71250
SP 1318-100
13.040.11318
SP 1318-200
13.040.21318
SP 1319-100
13.040.11319
SP 1319-200
13.040.21319
Min. / max. input voltage [V]
18 - 32
Terminal voltage [V]
25.5
Switching voltage [V]
Continuance [A]
27
26.8
26.8
26.8
26.8
50
100
200
100
200
Overload / 1s [A]
250
300
600
300
600
Standby consumption / on [mA / A]
1/ 0.23
3/ 0.5
10/ 0.85
3/ 0.5
10/ 0.85
Relay function
n.o. contact
Flange
side
base
side
base
side
Additional function
none
emergency start,
control output
Operating temperature range [°C]**
-20 to + 60
-40 to +85
Weight [g]
115
450
860
450
860
Dimensions L x W x H [mm]
75 x 32 x 50
66 x 66 x 80
105 x 86 x 98
66 x 66 x 80
105 x 86 x 98
20
** sufficient ventilation required at place of installation
Undervoltage Protection Relays
Choice of unidirectional/bidirectional
The Sure Power relays of the SP 31xx series are used for switching higher currents. Their
advantage is that no further coil current flows after the switching process. They are particularly suitable for use as undervoltage protection and remote control battery master
switches. Terminal and switching voltages can be set individually.
24 V
12 V
24 V Bidirectional Relay
Type
Art. no.
Separating relay SP3103 300A/24V Uni/Bi
12 V Bidirectional Relay
SP 3103
13.040.13103
Type
Art. no.
SP 3104
13.040.13104
Min. / max. input voltage [V]
Min. / max. input voltage [V]
Terminal voltage [V]
Terminal voltage [V]
Switching voltage [V]
26
Switching voltage [V]
Continuous [A]
300
Continuous [A]
300
2400
Overload / 1s [A]
2400
Standby consumption / on [mA / A]
9 / 2.8 (0.55)
Standby consumption / on [mA / A]
9 / 6,6 (0,55)
Relay function
n.o. contact, bistable
Relay function
Schließer, bistabil
base
Flange
base
Additional function
manual switchover,
adjustable delay, control output
Additional function
manual switchover,
adjustable delay, control output
Operating temperature range [°C]
-40 to +85
Operating temperature range [°C]
-40 to +85
750
Weight [g]
750
105 x 86 x 98
Dimensions L x W x H [mm]
105 x 86 x 98
Overload / 1s [A]
Flange
Weight [g]
Dimensions L x W x H [mm]
12,7
INFO
Electronic Charging Current Distributor CDR:
Universal for
12V & 24V incl.
battery terminal
insulators
• incl. emergency start function
• separation of the batteries (starter & auxiliary battery)
• efficient power distribution with little drop in voltage
(when connected to generator or similar charging
equipment)
• optimum use of the battery system thanks to priority
charging of the starter battery
CDR 200/100
CDR Charging Current Distributor
Type
Art. no.
CDR 200/100
13.011.71460
Max. voltage against ground [V]
32
Typ. initial starting voltage [V]
13.5 / 27.0
13.5 / 27.0
Max. current output [A] *
100
40
Voltage drop at max. current [mV]
150 (30 at 30A)
30
IP-class
IP67
max. casing temperature [°C]
95
Range of operating temperature [°C] **
- 20 to + 60
Connections
M8
Weight [kg]
1.1
Dimensions L x W x H [mm]
155 x 80 x 43
Height incl. bolts [mm]
63
Attachment
bolt 4 x M6
Mechanical vibration
40G, acc. to IEC 60068-2-6
Marks of conformity / standards
* current is restricted
CDR 200/40
13.011.71450
CE / EN 55022
** sufficient ventilation required at place of installation
21
Alfatronix DC-DC Converters “Click’n’fit”
NEW!
The converters in the PV series make it easy to operate standard versions of 12 V devices such
as mobile phones, built-in radios and CD players, or 12 V refrigerators in vehicles with a 24 V
electrical system or aircraft with a 28 V wiring system. The voltage converters operate with low
heat emission thanks to their efficient switch mode power supply technology with SMD circuit
boards throughout. This achieves high efficiency as well as high resistance to mechanical shocks.
RU range in
IP65
The PV converters in IP65 enclosure version (RU series) are new in the
Alfatronix product range, and include a 1 m connection cable and a
vibration-proof cable clamp as standard.
PV3s
12 V
PV6s-RU, IP65
DD12-24 168-RU, IP65
Converters 24 – 12V – common ground
Type
Art. no.
PV3s
0432412032
PV6s
04.324.12062
PV12s
04.324.12122
PV18s
04.324.12182
PV24s
04.324.12242
DD24-12 600s
04.324.12600
Input voltage [V]
24
24
24
24
24
24
Output voltage [V]
13.6
13.6
13.6
13.6
13.6
13.6
Continuous current [A]
3
6
12
18
24
50
Peak current [A] max. 2 minutes
6
10
18
22
30
60
Min. / max. input voltage [V]
17 - 32
17 - 32
17 - 32
17 - 32
17 - 32
17 - 32
Min. / max. output voltage
-20% / 15%
Galvanic separation
no
no
no
no
no
no
Ripple [mV] (peak)
< 100
< 100
< 100
< 100
< 100
< 100
Standby current [mA]
< 15
< 15
< 15
< 15
< 15
< 15
Typical efficiency [%]
90
90
90
90
90
90
Dimensions [mm]
67 x 87 x 50
89 x 87 x 50
127 x 87 x 50
167 x 87 x 50
167 x 87 x 50
300 x 76 x 110
IP-class
IP53
IP53
IP53
IP53
IP53
IP53
Weight [g]
225
270
405
620
635
1180
Connections
4 x 6.3 mm
blade terminals
4 x 6.3 mm
blade terminals
4 x 6.3 mm
blade terminals
4 x 6.3 mm
blade terminals
4 x 6.3 mm
blade terminals
4 x 6.3 mm
blade terminals
Converters 24 – 12V – galvanically separated
Type
Art. no.
PV3i
04.324.12031
PV6i
04.324.12061
PV12i
04.324.12121
PV18i
04.324.12181
PV24i
04.324.12241
Input voltage [V]
24
24
24
24
24
Output voltage [V]
13.6
13.6
13.6
13.6
13.6
Continuous current [A]
3
6
12
18
24
Peak current [A] max. 2 minutes
6
10
18
22
30
Min. / max. input voltage [V]
17 - 32
17 - 32
17 - 32
17 - 32
17 - 32
Min. / max. output voltage
-20% / 15%
Galvanic separation
yes
yes
yes
yes
yes
Ripple [mV] (peak)
< 100
< 100
< 100
< 100
< 100
Standby current [mA]
< 15
< 15
< 15
< 15
< 15
Typical efficiency [%]
85
85
85
85
85
Dimensions [mm]
89 x 87 x 50
127 x 87 x 50
167 x 87 x 50
217 x 87 x 50
217 x 87 x 50
IP-class
IP53
IP53
IP53
IP53
IP53
Weight [g]
290
410
590
835
850
Connections
4 x 6.3 mm
blade terminals
4 x 6.3 mm
blade terminals
4 x 6.3 mm
blade terminals
4 x 6.3 mm
blade terminals
4 x 6.3 mm
blade terminals
Common technical data of the Alfatronix DC-DC converters
Operating temperature [°C] according to specifications
-25 to +30
Min. / max operating temperature [°C] linear decrease in power to 0A
+30 to +80
Operating display
LED
Casing
anodised aluminium, glass-fibre reinforced polycarbonate
Installation
installation clip with three-hole bracket, click attachment
Marks of conformity
CE, E
22
24 V
Converters 12 – 24V – common ground
Type
Art. no.
DD 12-24 072
04.312.24072
DD 12-24 168
04.312.24168
DD 12-24 240
04.312.24240
DD 12-24 400
04.312.24400
DD 12-24 600
04.312.24600
Input voltage [V]
12
12
12
12
12
Output voltage [V]
27.2
27.2
27.2
27.2
27.2
Continuous current [A]
3
7
10
16
25
Peak current [A] max. 2 minutes
4
9
13
20
32
Min. / max. input voltage [V]
10.0 - 15.0
10.0 - 15.0
10.0 - 15.0
10.0 - 15.0
10.0 - 15.0
Min. / max. output voltage
+/- 5%
+/- 5%
+/- 5%
+/- 5%
+/- 5%
Galvanic separation
no
no
no
no
no
Ripple [mV] (peak)
< 100
< 100
< 100
< 100
< 100
Standby current [mA]
< 100
< 100
< 100
< 20
< 20
Typical efficiency [%]
93
93
93
93
93
Dimensions [mm]
89 x 87 x 50
167 x 87 x 50
217 x 87 x 50
233 x 125 x 74
283 x 125 x 74
IP-class
IP53
IP53
IP53
IP53
IP53
Weight [g]
300
640
820
1,610
1,860
Connections
4 x 6.3 mm
blade terminals
4 x 6.3 mm
blade terminals
4 x 6.3 mm
blade terminals
5 x slot connector with
threadlocker and plug
5 x slot connector with
threadlocker and plug
PV12s_RU
04.324.12122
PV18s_RU
04.324.12182
PV24s_RU
04.324.12242
12 V
Waterproof converters 24 – 12V – common ground
Type
Art. no.
PV3s_RU
04.324.12032
PV6s_RU
04.324.12062
Input voltage [V]
24
24
24
24
24
Output voltage [V]
13.6
13.6
13.6
13.6
13.6
Continuous current [A]
3
6
12
18
24
Peak current [A] max. 2 minutes
6
10
18
22
30
Min. / max. input voltage [V]
17 - 32
17 - 32
17 - 32
17 - 32
17 - 32
Galvanic separation
no
no
no
no
no
Ripple [mV] (peak)
< 50
< 50
< 50
< 50
< 50
Min. / max. output voltage
-20% / 15%
Standby current [mA]
< 15
< 15
< 15
< 15
< 15
Typical efficiency [%]
90
90
90
90
90
Dimensions [mm]
86 x 91 x 52
108 x 91 x 52
146 x 91 x 52
186 x 91 x 52
186 x 91 x 52
IP-class
IP65
IP65
IP65
IP65
IP65
Weight [g]
325
370
505
820
835
Connections
1 m cable
1 m cable
1 m cable
1 m cable
1 m cable
PV12i_RU
04.324.12124
PV18i_RU
04.324.12184
PV24i_RU
04.324.12244
Waterproof converters 24 – 12V – galvanically separated
Type
Art. no.
PV3i_RU
04.324.12035
PV6i_RU
04.324.12064
Input voltage [V]
24
24
24
24
24
Output voltage [V]
13.6
13.6
13.6
13.6
13.6
Continuous current [A]
3
6
12
18
24
Peak current [A] max. 2 minutes
6
10
18
22
30
Min. / max. input voltage [V]
17 - 32
17 - 32
17 - 32
17 - 32
17 - 32
Min. / max. output voltage
-20% / 15%
Galvanic separation
yes
yes
yes
yes
yes
Ripple [mV] (peak)
< 50
< 50
< 50
< 50
< 50
Standby current [mA]
< 15
< 15
< 15
< 15
< 15
Typical efficiency [%]
85
85
85
85
85
Dimensions [mm]
108 x 91 x 52
146 x 91 x 52
186 x 91 x 52
236 x 91 x 52
236 x 91 x 52
IP-class
IP65
IP65
IP65
IP65
IP65
Weight [g]
390
510
690
1035
1050
Connections
1 m cable
1 m cable
1 m cable
1 m cable
1 m cable
23
Convertible
INFO
Voltage Converters for DC
LEAB has numbers of step-up and step-down DC-DC converters and
equalizers in its range of products with which to cover almost all
purposes. Various converters are also available with galvanic insulation and/or in an IP65 or IP67 enclosure (RU series by Alfatronix and
Sure Power series).
Parallel connection of several converters or equalizers to increase
power output is possible – we’d be pleased to advise you on this.
SP210xxC00 - 6 pin
Deutsch series: DT
SP21030C02 –
screw terminals
SP DC-DC Converters & Equalizers:
• specially designed for special vehicles
• device operation & charging of
batteries in a dual-voltage wiring system
• protected against reverse polarity, shortcircuiting, overvoltage, undervoltage,
current peaks and loss of ground
For further
converters &
equalizers visit:
www.leab.eu/en
SP21030C02
SP21030C00 - 4 pin +
6 pin Deutsch series: DT
SP21030C00
SP21100C00
12 V
DC-DC Equalizers 12 V-24 V
Type
Art. no.
SP12010E00
04.020.12010
SP12025E00
04.020.12025
SP12040E10
04.020.12042
Input voltage [V]
12
12
12
Output voltage [V]
2 x Vin
2 x Vin
2 x Vin
Continuous current [A]
10
25
40
Min. / max. input voltage [V]
9.5 - 16.5
9.5 - 16.5
9.5 - 16.5
Switched input for e.g. terminal 50
yes
yes
yes
Dimensions [mm]
154 x 143 x 59
208 x 216 x 81
216 x 303 x 78
Weight [kg]
1.7
4.2
6
Connections
6 pin Deutsch series DT
M8 screw
M8 screw
Type
Art. no.
SP12010C00
04.020.12011
SP12025C00
04.020.12026
SP12040C10
04.020.12043
Input voltage [V]
12
12
12
Output voltage [V]
24
24
24
Continuous current [A]
10
25
40
Min. / max. input voltage [V]
9.5 - 16.5
9.5 - 16.5
9.5 - 16.5
Switched input for e.g. terminal 50
yes
yes
yes
Dimensions [mm]
154 x 143 x 59
208 x 216 x 81
216 x 303 x 78
Weight [kg]
1.7
4.2
6
Connections
6 pin Deutsch series DT
M8 screw
M8 screw
DC-DC Converters 12 V-24 V
24
24 V
DC-DC Equalizers 24 V-12 V
Type
Art. no.
SP21030E02
04.020.21030
SP52204
04.020.52204
SP21060E00
04.020.21060
SP21080E00
04.020.21080
SP21100E00
04.020.21100
Input voltage [V]
24
24
24
24
24
Output voltage [V]
Vin / 2
Vin / 2
Vin / 2
Vin / 2
Vin / 2
Continuous current [A]
30
40
60
80
100
Max. output current [A]
32
42
69
92
115
Min. / max. input voltage [V]
17 - 34
14.0 - 34.0
16.9 - 34.0
16.9 - 34.0
16.9 - 34.0
Switched input for e.g. terminal 50
yes
no
no
no
no
Dimensions [mm]
168 x 142.9 x 59.7
208 x 215.9 x 80.5
302.9 x 203.2 x 77.6
302.9 x 203.2 x 77.6
302.9 x 203.2 x 77.6
Weight [kg]
4.0
4.5
4.5
4.6
4.7
Connections
screw terminals
3 x M6 screws
3 x M6 screws
3 x M6 screws
3 x M6 screws
SP21008C00
04.020.21008
SP21012C10
04.020.21013
SP21015C00
04.020.21015
SP21020C00
04.020.21020
SP21030C02
04.020.21031
DC-DC Converters 24 V-12 V
Type
Art. no.
Input voltage [V]
24
24
24
24
24
Output voltage [V]
13.7
13.7
13.7
13.5
13.5
Continuous current [A]
7.5
12
15
20
30
Max. output current [A]
8.4
13.5
16
22
32
Min. / max. input voltage [V]
18 - 36
17 - 35
17 - 36
17 - 36
17 - 34
Switched input for e.g. terminal 50
yes
yes
yes
yes
yes
Dimensions L x W x H [mm]
59.7 x 114.3 x 76.2
88 x 114.3 x 60
146.1 x 114.3 x 59.7
146.1 x 114.3 x 59.7
168 x 142.8 x 59.7
Weight [kg]
0.5
0.6
1.4
1.4
4.0
DC-DC Wandler 24V-12V
Connections
6 pin Deutsch series: DT
6 pin Deutsch series: DT
6 pin Deutsch series: DT
6 pin Deutsch series: DT
screw terminals
Type
Art. no.
SP21030C00
04.020.21032
SP52304
04.020.5230
SP21060C00
04.020.21061
SP21080C00
04.020.21081
SP21100C00
04.020.21101
Input voltage [V]
24
24
24
24
24
Output voltage [V]
13.5
13.5
13.5
13.5
13.5
Continuous current [A]
30
40
60
80
100
Max. output current [A]
32
42
69
92
115
Min. / max. input voltage [V]
17 - 34
17 - 34
15.9 - 34.0
15.9 - 34.0
15.9 - 34.0
Switched input for e.g. terminal 50
yes
no
no
no
no
Dimensions L x W x H [mm]
181.0 x 142.9 x 59.7
208 x 215.9 x 80.5
302.9 x 203.2 x 77.6
302.9 x 203.2 x 77.6
302.9 x 203.2 x 77.6
Weight [kg]
4.0
4.5
4.55
4.65
4.75
Connections
1 x 4 pin + 1 x 6 pin
Deutsch series
3 x M6 screws
3 x M6 screws
3 x M6 screws
3 x M6 screws
Technical Data LEAB SP Converters and SP Equalizers
Typical efficiency [%]
> 90
Operating temperature range [°C]
-40 to +85
Power reduction from [°C]
85
Galvanic separation
no
Operating humidity [%]
0 - 100
Current limitation
yes
Reverse polarity protection
yes
Short-circuit proof
yes
Overvoltage protection
yes
Operating display
LED
Casing
anodised aluminium/cast aluminium
IP-class
IP65/IP67
Marks of conformity
CE, E
25
When Every Second Counts ...
NEW:
Power &
compressed air,
13 bar, in one
PowAirBox®
An innovative & safe mains supply for many applications:
combined power and compressed air supply
with the PowAirBox®!
In every type of commercial vehicle it is necessary for all the
onboard functions to be ready for use at all times. However, this is quite literally vital for vehicles used by the rescue
services, because in these cases, lives might be lost if the
technology does not work perfectly. Charged batteries and
full compressed air tanks are among the most important
basic requirements for a successful rescue mission where
every second counts.
INFO
Up to now, this could only be guaranteed by using two separate systems for power and compressed air supply. This is
not only impractical, it also involves a significant risk potential: the plug connections can be forgotten when the vehicle leaves the station, leading to considerable damage to the
vehicle and the building. Every time the vehicle is called out,
two connecting lines have to be separated manually from the
vehicle. With the PowAirBox® these problems are a thing of
the past!
• automatic connector ejection
• power and compressed air supply
• 2 auxiliary contacts for free assignment
• battery indicator with alarm function
• up to 5 years warranty
• type A & B are compatible
12 V
24 V
230 V
PowAirBox® A – Power & Compressed Air
Type
Remarks
Art. no.
Supply [A]
Onboard voltage [V]
Contacts
Cable length [m]*
PowAirBox® A 12
Supply 12 V
with compressed air
1549.012.100
Supply [V]
12
20
12/24
+ / - / 2 Hk.
4
PowAirBox® A 24
Supply 24 V
with compressed air
1549.024.100
24
20
12/24
+ / - / 2 Hk.
4
PowAirBox® A 230
Supply 230 V
with compressed air
1549.230.100
230
20
12/24
L1 / N / PE / 2 Hk.
4
PowAirBox® A 12 coupling
Coupling 12 V with
multi-cable for power
& compressed air
1549.012.010
12
20
12/24
+ / - / 2 Hk.
4
PowAirBox® A 24 coupling
Coupling 24 V with
multi-cable for power
& compressed air
1549.024.010
24
20
12/24
+ / - / 2 Hk.
4
PowAirBox® A 230 coupling
Coupling 230 V with
multi-cable for power
& compressed air
1549.230.010
230
20
12/24
L1 / N / PE / 2 Hk.
4
* further cable lengths on request
26
The PowAirBox® is a supply system that was especially
developed for rescue vehicles and fire trucks. It supplies
every vehicle with power and with compressed air if required. When the vehicle engine is started, a special separation device automatically separates the supply line from the
vehicle. Ejection is by means of a stainless steel spring and an
electric magnet which can withstand any load. Even repeated engine start-up does not cause any damage.
In the event of undervoltage, a clearly audible acoustic
signal is sounded in addition to the optical display. The extremely sturdy ejection system separates the supply coupling when the vehicle is started. The round protective cover
is then lowered automatically over the coupling and closes it
magnetically.
Two of the auxiliary contacts available in the standard
version can be freely assigned, for example for status display
on the central PC, for start prevention or charging at higher
charging powers. The PowAirBox® complies with the currently valid DIN 14679. The insulated protected casing is made
of glass-fibre reinforced polyamide in accordance with PA6
GF30.
The PowAirBox® is available in 4 variants, whereby the couplings with and without compressed air are mutually compatible. Coded pins reliably prevent faulty connections being
made e.g. between a 24V coupling and 12V onboard power
supply.
The PowAirBox® is absolutely operator-friendly, reliable
and maintenance-free onboard equipment which has an excellent chance of becoming the norm in future. We grant a
warranty period of at least 3 years for all orders (optionally
5 years).
A battery state of charge display with LED indication is part
of the standard equipment. This guarantees permanent
checks on the current state of charge of the battery.
Ordering
Example
Accessories
Type
Description
Art. no.
Ceiling device
PowAirBox® ceiling device with stainless
1549.000.000
steel holder
Champ 1230 Pro
Charger 12 V, 30 A
Wet/gel/AGM
01.010.43890
Champ 2420 Pro
Charger 24 V, 20 A
Wet/gel/AGM
01.010.43891
CPC 1230
Charger 12 V, 30 A
01.010.36930
CPC 2420
Charger 24 V, 20 A
01.010.36903
CTS-5
5 m combined sensor cable
16.010.35598
Adapter PowAirBox® B
CEE, 1 m H07BQ-F 3G2,5/230 V
1549.230.024
Adapter PowAirBox® B
Schuko, 2.5 m H07BQ-F 230 V
1549.230.021
Adapter PowAirBox® B
Schuko, 5 m H07BF-F 3G2,5/230 V
1549.230.022
12 V
24 V
AArt. no.
BDescription
Quantity
1549.230.100
PowAirBox® 230 V
with compressed air
1
1549.230.010
Coupling with 4 m multi-cable
1
1549.000.000
Deckenhalter für PowAirBox®
1
01.010.43891
Champ 2420 Pro
Wet/gel/AGM
1
230 V
PowAirBox® B – without compressed air
Type
Remarks
Art. no.
PowAirBox® B 12
Supply 12 V
1549.012.200
PowAirBox® B 24
Supply 24 V
1549.024.200
PowAirBox® B 230
Supply 230 V
1549.230.200
PowAirBox® B 12 coupling
Coupling 12 V with
heavy-duty rubber
insulated cable
5 x 2.5 mm²
1549.012.020
PowAirBox® B 24 coupling
Coupling 24 V with
heavy-duty rubber
insulated cable
5 x 2.5 mm²
PowAirBox® B 230 coupling
Coupling 230 V with
heavy-duty rubber
insulated cable
5 x 2.5 mm²
* further cable lengths on request
Supply [V]
Supply [A]
Onboard voltage [V]
Contacts
Cable length [m]*
20
12/24
+ / - / 2 Hk.
4
24
20
12/24
+ / - / 2 Hk.
4
230
20
12/24
L1 / N / PE / 2 Hk.
4
12
20
12/24
+ / - / 2 Hk.
4
1549.024.020
24
20
12/24
+ / - / 2 Hk.
4
1549.230.020
230
20
12/24
L1 / N / PE / 2 Hk.
4
12
27
Ensuring Batteries Stay “Fit”
NEW!
Battery Monitor & Booster
LEAB has a series of powerful battery monitors – BW – in its range to
protect supply batteries and connected loads from the potentially
dangerous consequences of undervoltage and total discharge.
LEAB BW 20
The battery monitors set off alarms and switch the device off when
the set switch-off thresholds are reached, ensuring that the necessary
battery recharging measures are taken and voltage dips can be avoided when powerful loads are switched. It is important that batteries
“hold out” for problem-free operation.
LEAB BW 200
LEAB BW 60
The BW 801 battery monitor provides low voltage protection and can be universally applied for 12V and 24V electric systems. The
threshold value is set using a DIP switch, and the high current capacity of 70 A as well as the solid M6 bolts enable even more powerful loads to be switched off without an intermediate relay.
Transient voltage dips or peaks, such as those that may occur when switching powerful loads, do not cause false trips. The BW 801
is a two-stage low voltage protector that sets off an alarm when the first threshold value is reached and switches the device off
when the second value falls below the threshold and the set time span. A three-colour LED display is used as an operating state indicator. The “alarm” connection can be used to switch an external buzzer (contact to earth, max. 1 A).
Accessories BW 801
Battery Monitors
Type
Art. no.
BW 20
13.050.41020
BW 60
13.050.41060
BW 200
13.050.41200
BW 801
13.050.41042
Input voltage [V]
12/24
Monitoring range [V]
9.5-12/19-24
Current continuous/max. [A]
20
IP-class
IP65
Temperature range [°C]
-25 to +60
Dimensions [mm]
155x30x15
76x78x33
124x97x51
100x90x44
Weight [kg]
0.045
0.155
0.530
0.200
Marks of conformity
CE, E
9-13,5/18-27
60
200
3-colour LED
50/70
IP44
-30 to +70
BW 801 Battery watch
Terminal insulator cap 400N9
DC-DC booster PBU 1412 / 12V-12V with relay
The LEAB DC-DC booster PBU 1412 increases the charging voltage irrespective of the state of charge of the starter battery to the
required value of 14.4V and supplies a continuous current of 12 amps (IU characteristic). If the auxiliary battery is fully charged,
the output current of the booster automatically adapts itself and drops.
The LED on the device lights up when the booster is charging. The starter battery and load battery are disconnected at switch-off.
The LEAB DC/DC booster is suitable for all types of lead batteries providing they have been designed for a charging voltage of 14.4 V.
PBU 1412
28
DC-DC Booster
Type
Art. no.
Booster PBU 1412
08.010.37020
Input voltage [VDC]
9 - 15
Output voltage [V]
14.4
Max. output current [A
12
Fuse DC output [A]
20
Temperature range [°C]
-20 to +40
Dimensions [mm]
155 x 80 x 43
Weight [kg]
0.9
Operating display
LED
Casing
anodised aluminium
Cooling
convection
Efficiency [%]
> 90
Standby current [mA]
< 0.25
Marks of conformity
CE, E
EXIDE GEL Batteries
INFO
Batteries Made by Professionals for Professionals
• highly flexible installation
(can be installed on the side)
EXIDE GEL batteries were developed to supply energy to specialpurpose vehicles such as fire trucks, police cars, rescue vehicles,
military, industrial and commercially used vehicles with high energy requirements. They offer reliable starting power plus maximum
energy for high cyclical loads during professional applications.
The Wh output range of 450 to 2400 Wh offers a large selection for
state-of-the-art and highly challenging applications in commercial
and emergency vehicles.
• high vibration resistance & inclination tolerance
• maintenance-free
EXIDE GEL batteries
EXIDE GEL Batteries
Type
Art. no.
G16
06.010.30016
ES290*
06.010.30025
ES450**
06.010.30040
ES650
06.010.3006
ES900
06.010.30080
ES950
06.010.30085
ES1200
06.010.30110
ES51350
06.010.30120
Old designation
-
G25
G40
G60
G80
G85
G110
G120
Voltage [V]
12
12
12
12
12
12
12
12
Capacity 20h [Ah]
16
25
40
56
80
85
110
120
Capacity 100h [Ah]
–
27
–
67
90
95
125
13
Cold start current DIN
65
24
280
440
540
460
750
760
External dimensions L x W x H [mm] 181 x 76 x 167
165 x 175 x 125
210 x 175 x 175
278 x 175 x 190
353 x 175 x 190
330 x 171 x 236
286 x 269 x 230
513 x 189 x 223
Weight [kg]
10
13
21.2
26.8
30
39
40
7
Base holddowns
–
–
–
yes
yes
yes
–
–
Terminal type
flat
flat
flat
flat
flat
flat
flat
round
*NB: Purely a power supply battery; limited use for starting applications **This battery is especially vibration-resistant
EXIDE DUAL AGM Batteries
EXIDE DUAL AGM batteries are high-current batteries that were developed to
supply emergency rescue vehicles with power and ensure especially good starting
performance for engines.
The battery‘s particularly low internal resistance enables a faster and higher charge
current (over 100A). Accordingly, a discharged battery will recharge itself extremely
quickly! This means that this battery type is ideally suited, for example, for emergency rescue vehicles used for short distances.
Further
selection of
batteries:
www.leab.eu/en
EP 450
EXIDE Dual AGM Batteries
Type
Art. no.
EP450
06.010.20055
EP900
06.010.20100
EP1200
06.010.20140
EP1500
06.010.20180
EP2100
06.010.20240
Voltage [V]
12
12
12
12
12
Capacity 20h [Ah]
50
100
140
180
240
Cold start current EN [A]
750
720
700
900
1200
External dimensions L x W x H [mm] 260 x 173 x 206 330 x 173 x 240 513 x 189 x 223 513 x 223 x 223 518 x 279 x 240
Weight [kg]
19
32
45
55
72
Terminal type
flat
flat
round
round
round
GEL-PowerBox – 230 V portable and robust
EP 900
230 V
• includes two EXIDE GEL batteries, a sine wave inverter
& an automatic battery charger
• safely packed in a PELICASE® in IP54
• weight: 21 kg
• usage time: more than 1.5 h when connected to a 150 W load
• completely silent up to 25°C
29
Safe Contacts
INFO
Terminal Insulators & Fuses for Batteries
• regulation-conform covering of the
battery or other connection terminals
These pages only show a small selection of our extensive VTE
supply range. For further terminal insulators, busbars, power
distribution posts, power studs, fuses and fuse holders visit our
website at www.leab.eu/en and see the VTE product catalogue
which can be downloaded from there.
• distribution and fuse protection for
connectors
• non-ageing and chemical-resistant material,
also available in flame-retardant version
V02 = colour code red
V14 = colour code black
N
Terminal insulator cap 456
with CF8 fuse
= Ø cable entry
ANL fuse
with VTE insulator cap
Insulators 200 Series – excerpt –
VTE series
Pole cap Ø mm
Inside height pole cap mm Ø in shaft mm
Cable entry *N
Standard length mm
Extra long version mm
Material thickness mm
216
16
20.3
12.7
1, 2
25.4
31.8
1.5
218
18
22.1
12.7
1, 2
25.4
31.8
1.5
220
20
21.3
17.8
1, 2, 3
33.5
44.5
1.8
222
22
26.7
17.8
1.2, 2
33.5
44.5
1.8
226
26
31.8
17.8
1, 2, 3
41.1
52.3
2.0
228
28
33.5
19.1
1, 2, 3
44.5
57.1
2,3
*N1 = 3.3 to 5.8mm N2 = 7.6 to 12.7mm N3 = 12.7 to 17.8mm N4 = 17.8 to 22.9mm
CF8 Fuses
Pole terminal + CF8
Insulating nut CF8
Fuse CF8
Fuse CF8
15.102.01000
15.102.01010
50 A - 15.102.01050
175 A - 15.102.01175
galvanized metal
plastic
75 A - 15.102.01075
200 A - 15.102.01200
thread M8
to be used with cable shoe M10
100 A - 15.102.01100
250 A - 15.102.01250
125 A - 15.102.01125
300 A - 15.102.01300
150 A - 15.102.01150
Fuses and Fuse Holders
Fuse holder
BF1
High power fuse
BF1 up to 32 volts
Fuse holder, red
Fuse holder, black
50.290.092
for strip fuse
max. 125 A to 32
30 A - 50.295.858
15.740.N9V02
15.740.N9V14
50 A - ANF.340.050
100 A - 50.295.290
40 A - 50.295.859
for ANL strip fuse
50 to 500 A,
incl. 2 x Series 487 insulator in red
and plastic cover
for ANL strip fuse
50 to 500 A,
incl. 2 x Series 487 insulator in black
and plastic cover
80 A - ANF.340.080
125 A - 50.295.295
50 A - 50.295.860
100 A - ANF.340.100
250 A - 50.295.292
60 A - 50.295.861
150 A - ANF.340.150
300 A - ANFC.340.300
70 A - 50.295.865
200 A - ANF.340.200
350 A - ANFC.340.350
80 A - 50.295.862
250 A - ANF.340.250
400 A - ANFC.340.400
100 A - 50.295.863
300 A - ANF.340.300
500 A - ANFC.340.500
125 A - 50.295.864
30
ANL strip fuse
ceramic insulator
ANL strip fuse
ceramic insulator
Insulators 400 Series – excerpt –
Type
Art. no.
417N9V02
15.417.N9V02
454R9V02
15.454.R9V02
453L9V14
15.453.L9V14
456N9V02
15.456.N9V02
485N9V02
15.485.N9V02
Cable entry [N, L, R]
centre
right
left
centre, oval
centre
Cable entry [Ømm]
12.7
12.7
28.5
9.7 - 19.1
6.4
Inside height* pole cap [mm]*
23.1
28.5
24.5
48.3
11.4
Standard length [mm]
78.4
78.20
78.20
104.5
34.80
Insulators 500 Series – excerpt –
Insulators 800 Series – excerpt –
Type
Art. no.
500D7V02
15.500.D7V02
500L7V02
15.500.L7V02
500R7V02
15.500R7V02
800N4V02
15.800.N4V02
801N8V02*
15.801.N8V02
830N0V02**
15.830.N0V02
Cable entry [N, L, R]
end-to-end
left
right
centre
centre
–
Cable entry [Ømm]
12.7
12.7
28.5
4.3
7.9
–
Inside height* pole cap [mm]*
24.9
24.9
24.9
27.7
27.7
12.7
Standard length [mm]
92.7
72.2
72.2
45.9
45.9
46.5
*inside height directly above terminal connection **suitable for SB50 plug contact
Plugs & Sockets
Detachable plug connections must have a certain mechanical resistance to prevent them coming loose due to unavoidable vehicle
vibrations. Low contact resistance – even where currents at the measuring limit of the plug system are involved – as well as durability of the plug-type contacts are essential here.
LEAB supplies a range of plug-type contacts which have been selected according to these criteria. In addition, we also supply the
most important standard plugs according to DIN standards so that equipment is compliant with these standards. Plugs for 230 V
and 400 V at www.leab.eu/en.
NATO-Plugs & Sockets in accordance with VG96917
Socket 2-pole, olive with screw cap
Plug 2-pole
Plug 2-pole with threaded ring
Coupling 2-pole
15.020.19170
15.020.19192
15.020.19190
15.020.19193
Metal 24/30A
Plug metal
Plug metal 24/30A
Solid rubber
VDA 72 593A/acc. to VG 96917
VDA 72 593 B
VDA 72 593 B/acc. to VG 96917
VDA 72 593 C
suitable for cables up to 50mm2
suitable for all cables up to 35mm2
suitable for cables up to 35mm2
Crimp/solder contact
suitable for plug 51.30.5916
Pins single art. no. 51.30.5416/52
Pins single art. no. 51.30.5916/51
Pins single art. no. 51.30.5916/51
Plugs & Sockets according to DIN 14690 for Fire Trucks & Rescue Vehicles
Socket 2-pole, A DIN 14690
Plug 2-pole, C DIN 14690
Cable bush
Surface seal
15.020.14692
15.020.14690
15.020.14695
15.020.14696
alloy with screw connections
alloy with union nut
soft rubber, black
soft rubber, black
Ø cable at cable entry: 12mm
Ø cable at cable entry: 12mm
for diameters 6 – 12 mm
for sealing power stud
individual wire: 3mm2
individual wire: 3mm2
with screw connections
suitable for 15.020.1490
suitable for 15.020.1492
max. load: 16A
Max. load: 16A
suitable for 15.30.5821
31
Power Supply Systems for Commercial Vehicles
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
Germany
T +49 (0) 4621 9 78 60-0
F +49 (0) 4621 9 78 60-260
[email protected]
www.leab.eu
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement