Raven Low-power x86 Embedded Processing Unit

Raven Low-power x86 Embedded Processing Unit
Product Data Sheet
Raven
Embedded Processing Unit
95 x 95 x 27 mm
(3.7 x 3.7 x 1.1”)
Overview
Highlights
The Raven is a compact, rugged board-level embedded computer.
It has been engineered and tested to meet the military and medical
industries’ evolving requirements to develop smaller, lighter,
and lower power embedded systems while adhering to stringent
regulatory standards. Approximately four inches square and one
inch thick, the Raven is a member of the VersaLogic family of
small, light, ultra-rugged embedded x86 computers. This embedded
computer, equipped with an Intel Atom E38xx “Bay Trail” processor,
is designed to withstand extreme temperature, impact, and vibration.
ƒƒ A complete x86 embedded
computer
ƒƒ -40° to +85°C operating
temperature
ƒƒ Trusted Platform Module
(TPM) security chip
ƒƒ Shock & vibration per
MIL-STD-202G
ƒƒ 4th Generation Intel ® Atom™
“Bay Trail” processor
-- E3845 (quad core) or
-- E3827 (dual core) or
-- E3815 (single core)
ƒƒ Compact (95 x 95 x 27 mm)
ƒƒ Up to 4 GB DDR3L
soldered-on RAM
ƒƒ Dual Gigabit Ethernet
ƒƒ DisplayPort and LVDS
video output
Available in single-, dual-, and quad-core versions, the Raven
provides great performance and I/O features, moderate power
consumption (6 to 8W typical depending on model), and a
compact package. The Raven provides compatibility with a broad
range of standard x86 application development tools for reduced
development time.
A wide input voltage range of 8 to 30 volts simplifies system power
supply requirements. The Raven is fully compatible with 12 or 24V
vehicle applications. In addition, Reverse Voltage Protection, and
Over Voltage Protection enhances field durability and reliability.
ƒƒ Dual Mini PCIe Sockets
ƒƒ USB 3.0 port, USB 2.0 ports
ƒƒ Serial I/O ports, SATA,
Digital I/O
ƒƒ eMMC Flash. Up to 8 GB
ƒƒ Analog Inputs (8 chan.)
ƒƒ Wide input power regulation
-- 8 to 30 volt DC input
-- 12 and 24 volt system
compatible
-- Over and reverse-voltage
protection
ƒƒ Fanless versions
ƒƒ Customization available
ƒƒ VersaAPI software support
continued 
C
O
R
P
O
R
A
T
I
O
N
Product Data Sheet
Overview ...continued
Designed and tested for industrial temperature
(-40º to +85ºC) operation, the rugged Raven
also meets MIL-STD-202G specifications for
shock and vibration. Soldered-on RAM and
latching SATA, Ethernet, power, and main I/O
connectors provide additional ruggedization
for use in harsh environments.
Raven is compatible with a variety of popular
x86 operating systems including Windows,
Windows Embedded, Linux, and VxWorks.
Product customization is available, even in low
OEM quantities. Options include conformal
coating, BGA underfill, BIOS / splash screen
configuration, application specific testing,
BOM revision locks, custom labeling, etc. 
Features
1
2
Wide Range Voltage Input
RAM (not shown)
Accepts 8 to 30 volts DC with OVP, reverse polarity
protection, and RF noise filtering.
Up to 4 GB soldered-down DDR3L RAM.
Qualified for high shock / vibration environments.
FLASH (not shown)
Software Support
High-performance Video
Integrated Intel Gen 7 graphics core supports
DirectX 11, OpenGL 4, and H.264, MPEG-2
encoding/decoding. Mini DisplayPort (2a) and LVDS
video outputs (2b). LVDS backlight control (2c).
3
4
Up to 8 GB of on-board eMMC flash storage.
SATA
Compatible with a variety of popular x86 operating
systems including Windows, Windows Embedded,
Linux, and VxWorks.
Industrial Temperature Operation
-40° to +85°C operation for harsh environments.
7a
Network
Dual Gigabit Ethernet (GbE) with remote boot
support.
MIL-STD-202G
8
6
2c
7b
3 Gb/s SATA port supports bootable SATA hard drive.
5
Mini PCIe Card Sockets
Dual full-sized sockets. Supports A/D, Wi-Fi modems,
GPS, MIL-STD-1553, Ethernet, flash data storage
with auto-detect mSATA flash storage support, and
other mini PCIe modules.
6
2b
7c
MicroSD Socket
Supports removable microSD card solid-state drives.
7
Industrial I/O
9
5
5
One USB 3.0 port (7a) and four USB 2.0 ports (7b)
support keyboard, mouse, and other devices.
Four RS-232/422/485 serial ports (7c), three 8254
timer/counters, and I2C support.
8
On-board data acquisition support. Eight multi-range
analog inputs and eight 3.3V digital I/O lines.
9
3
Analog + Digital I/O
7c
SPI Interface
Supports SPI and SPX devices, including low cost
analog and digital modules.
Intel Atom “Bay Trail” Processor
(not shown)
Up to 1.9 GHz clock rate. Quad-, dual-, or single-core
options. Low power consumption.
Fanless Operation
No moving parts required for CPU cooling in most
configurations.
Trusted Platform Module (not shown)
On-board TPM security chip can lock out
unauthorized hardware and software.
1
4
2a
Tailor Raven to Your Exact Requirements
Customization options are available in quantities as low as 100 pieces.
ƒƒ Conformal Coating
ƒƒ Custom Cabling
ƒƒ Connector & I/O Changes
ƒƒ Custom Testing
ƒƒ Custom Labeling
ƒƒ BIOS Modifications
ƒƒ Software and Drivers
ƒƒ Environmental Screening
ƒƒ Revision Locks
ƒƒ Application-Specific Testing
ƒƒ And more –
VersaLogic Corporation, 12100 SW Tualatin Rd., Tualatin, OR 97062 | (503) 747-2261 | Info@VersaLogic.com | www.VersaLogic.com
Raven
Embedded Processing Unit
Specifications
General
Mass Storage
Board Size
95 x 95 x 27 mm (3.74 x 3.74 x 01.08”)
Rotating Drive ¥
One SATA 3 Gb/s port. Latching SATA connector.
Weight
200 grams (7.05 oz.)
On-board eMMC MLC Flash drive. 0 to 8 GB
Processor
Intel Atom E38xx platform. 512K 8-way L2 cache per core.
Intel 64-bit instructions, Virtualization Technology (VT),
and new AES instructions.
Connection for 3.0V RTC backup battery
Flash / Solid-State
Drives ¥
Battery
Power Requirements (@ +12V) †
Input Voltage
Model
Idle
Typical
Max.
S3
5.8W
6.0W
6.2W
1.1W
VL-EPU-3312-EBP
6.4W
6.8W
7.2W
1.1W
VL-EPU-3312-EDP
6.7W
7.8W
8.9W
1.1W
VL-EPU-3312-EAP
8V – 30V DC
Mini PCIe socket with mSATA support
Network Interface
Ethernet ‡
USB ‡§
One USB 3.0 / 2.0 port and four USB 2.0 host ports
COM Interface ‡
Four RS-232/422/485 selectable. 16C550 compatible.
1 Mbps max.
Eight TTL I/O Lines 3.3V. Independently configurable.
Thermal Management Bolt-on heat plate standard. Optional heat sink, fan, heat
pipe, and other thermal accessories available.
Operating
Model
Heat Plate**
Heat Sink
Heat Sink + Fan
Temperature ◊
All models -40° to +85°C -40° to +85°C -40° to +85°C
Ranges shown assume 90% CPU utilization. For detailed
thermal information, refer to the VL-EPU-3312 Reference
Manual.
** Heat plate must be kept below 90°C
Airflow Requirements Refer to the VL-EPM-3312 Reference Manual for detailed
airflow requirements.
Storage Temperature -40° to +85°C
Altitude *
Operating
To 4,570m (15,000 ft.)
Storage
To 12,000m (40,000 ft.)
Thermal Shock
5°C/min. over operating temperature
Humidity
Less than 95%, noncondensing
Vibration, Sinusoidal
Sweep ¤
Vibration, Random ¤
MIL-STD-202G, Method 204, Modified Condition A: 2g
constant acceleration from 5 to 500 Hz, 20 min. per axis
Mechanical Shock ¤
MIL-STD-202G, Method 214A, Condition A: 5.35g rms,
5 min. per axis
MIL-STD-202G, Method 213B, Condition G: 20g half-sine,
11 ms duration per axis
Security
TPM
Intel Trusted Platform Module 1.2 device.
Atmel – AT97SC3204-U2MA-10
Memory
System RAM
Digital I/O
Analog Input
I2C
Eight channels. 12-bit. Single-ended. 500 Ksps.
Independently configurable +/- 0.64V to +/- 10.24V high
input impedance inputs
Single I2C interface
Counter / Timers
Three 8254 compatible Programmable Interval Timers (PITs)
VersaLogic SPI
Interface
Supports SPI and SPX devices. Supports up to two SPX
modules.
Mini PCIe Card Socket
Full size Socket #1
Environmental
Two autodetect 10BaseT/100BaseTX/1000BaseT port.
Latching connector. Network boot option.
Device I/O
Input Protections
Over-voltage protection. Self resetting when input falls to
a safe level.
Reverse voltage input protection to -30V.
RF noise filtering (900 MHz, 2.5/5 GHz) – Minimum of 30
dB RF attenuation above 100 MHz.
Transient voltage protection (inductive kickback /
lightning) clamp at ~+60V / -40V – MSL level 1, per
J-STD-020, LF maximum peak of 260 °C
System Reset &
All voltage rails monitored. Watchdog timer with
Hardware Monitors
programmable timeout (1 µS to 10 min.). Push-button
sleep, reset, and power.
Regulatory Compliance RoHS (2002/95/CE)
One microSD socket. Supports up to 32 GB cards
Full size Socket #2
Supports Wi-Fi modems, GPS receivers, MIL-STD-1553,
Ethernet channels, non-volatile flash data storage, and
other plug-in modules. USB, SATA, and PCIe signaling.
Autodetect mSATA support.
PCIe and USB 2.0 signaling
Software
BIOS
Sleep Mode
Operating Systems
AMI Aptio UEFI BIOS with OEM enhancements. Field
reprogrammable.
ACPI 3.0. Support for S3 suspend state.
Compatible with most x86 operating systems including
Windows, Windows Embedded, Linux, and VxWorks
† Represents operation at +25°C and +12V supply running Windows 7 with LVDS display, SATA,
GbE, COM, and USB keyboard/mouse. Typical power computed as the mean value of Idle and
Maximum power specifications. Maximum power measured with 95% CPU utilization.
◊ Derate -1.1°C per 305m (1,000 ft.) above 2,300m (7,500 ft.)
* Extended altitude specifications available upon request
‡ TVS protected port (enhanced ESD protection)
§ Power pins on this port are overload protected
¥ Bootable storage device capability
¤ MIL-STD-202G shock and vibe levels are used to illustrate the extreme ruggedness of this
product in general. Testing at higher levels and/or different types of shock or vibration methods can
be accommodated per the specific requirements of the application. Contact a VersaLogic Sales
Engineer for further information.
Specifications are subject to change without notification. Intel and Atom are trademarks of Intel
Corp. microSD is a trademark of SD-3C, LLC. Embedded Processing Unit is a trademark of
VersaLogic Corp. All other trademarks are the property of their respective owners.
2 GB or 4 GB of soldered-on DDR3L SDRAM.
Video
General
VRAM
Integrated high-performance video. Intel Gen-7 graphics
core with 4 Execution Units and Turbo Boost. Supports
DirectX 11, OpenGL 4, VP8, MPEG2, H.264, and VC1.
Up to 224 MB shared DRAM
DisplayPort Interface § Mini DisplayPort++ output. 24-bit. Up to 2560 x 1600.
Supports DisplayPort and HDMI signaling (Video and
Audio outputs).
OEM Flat Panel
Single-channel LVDS interface. 18/24-bit.
Interface
Up to 1024 x 768 (60 Hz). Backlight control signals.
C
O
R
P
O
R
A
T
I
O
N
Raven
Product Data Sheet
Embedded Processing Unit
Ordering Information
Model
VL-EPU-3312-EAP
VL-EPU-3312-EBP
VL-EPU-3312-EDP
Processor
E3815
E3827
E3845
Call VersaLogic Sales at (503) 747-2261 for more information!
Cores
1
2
4
Accessories
Part Number
Cable Kit
VL-CKR-RAVEN
Description
Raven cable kit. Includes VL-CBR-0702, 1014 (x2), 1604, 2004, 2032,
0809, 4005, HDW-401, and 108.
System I/O paddleboard
SATA cable – rugged latching 20”
Dual Ethernet cable, 16-pin Clik-Mate to 2 RJ-45 – rugged latching, 12”
I/O screw terminal paddleboard, and cable, Latching, 12"
miniDisplayPort to VGA adapter, 6”
Power adapter cable, 12V medium-power. ATX12 to Raven. 12”
RS232 Dual channel cable 2xDsub (9-pin), Latching, 12”
Thermal compound paste. For heat sink attachment.
Mini PCIe / mSATA hardware kit (metric thread) 2.5 mm (10ea)
VL-CBR-4005
VL-CBR-0702
VL-CBR-1604
VL-CBR-2004
VL-CBR-2032
VL-CBR-0809
VL-CBR-1014 x2
VL-HDW-401
VL-HDW-108
Cables
VL-CBR-0203
2-pin Latching Battery Module, 6"
VL-CBR-0401
ATX to SATA power cable, 6.25”
VL-CBR-0503
USB 2.0 Male A to Male Micro-B Cable, 0.5 m
VL-CBR-0701
SATA cable, 20”
VL-CBR-0901
Pico-Clasp to Dual SPX Cable, 9-pin. 9”
VL-CBR-1015
USB 3.0 Micro A plug to 3.0 Micro B plug, 1 m
VL-CBR-2014
LVDS to VGA adapter board
VL-CBR-2015
24-bit LVDS 1mm Hirose Cable, 20”
VL-CBR-2016
18-bit LVDS cable (JAE), 20”
VL-CBR-2017
LVDS 24-bit 1.25 mm Hirose Cable, 20"
VL-CBR-0404
LED Back Light, 3-pin Pico-Clasp / 4-pin IDE Power to 6-pin 12V, 0.5 m
VL-CBR-2031
miniDisplayPort to miniDisplayPort, 36”
VL-CBR-2033
miniDisplayPort to HDMI active adapter, 6”
Audio
VL-ADR-01S
USB to Audio Adapter
Solid-State Storage (flash memory)
VL-F41-xxxx
microSD card (SDIO), SLC, industrial temp.
Rotating Drives
VL-HDS35-xxx
3.5” hard drive (SATA)
Hardware
VL-PS-ATX12-300A ATX development power supply
VL-HDW-111
Half to Full Size Mini PCIe Adapter kit. Metal adapter and screws (2)
Thermal Options
VL-HDW-416
Passive Heat Sink. Mounts to heat plate on standard product
95 x 95 x 10.5 mm
VL-HDW-415
12V Cooling fan for optional use with HDW-416 heat sink.
VL-HDW-408
Heat Pipe Connector Plate. Mounts to heat plate on standard product.
Speed
1.46 GHz
1.75 GHz
1.91 GHz
RAM
2 GB
2 GB
4 GB
eMMC Flash
None
4 GB
8 GB
Cooling
Heat plate
Heat plate
Heat plate
Mini PCIe Modules
Part Number
Description
Network
VL-MPEe-W2E
Wi-Fi 802.11 a/b/g/n
VL-MPEe-E3E
Gigabit Ethernet adapter
VL-MPEe-FW1E FireWire adapter
Serial I/O
VL-MPEe-U2E
Quad serial plus twelve GPIOs
Analog & Digital I/O
VL-MPEe-A1E
Analog input (12-bit resolution)
VL-MPEe-A2E
Analog input (16-bit resolution)
GPS
VL-MPEu-G2E
GPS receiver
Video
VL-MPEe-V5E
VGA and LVDS Interface
Solid-State Storage (flash memory)
VL-MPEs-F1Exx mSATA module (4/16/32 GB) (SATA)
Adapters
VL-MPEs-S3E
SATA adapter
Form Factor
Mini PCIe
Mini PCIe
Mini PCIe
Mini PCIe
Mini PCIe
Mini PCIe
Mini PCIe
Mini PCIe
Mini PCIe
Mini PCIe
Mini PCIe Modules
Take the Risk out of Embedded Computing
Mini PCIe Modules
Whether it’s selecting the optimum solution for your application,
lending expertise during development, or on-time delivery of
defect-free products, VersaLogic is here to make sure your
project goes smoothly from initial concept through the extended
life of your program. Contact us today to learn more.
ISO 9001:2008 Certified
Copyright © 2017 VersaLogic Corporation. All rights reserved.
05/09/17
12100 SW Tualatin Rd., Tualatin, OR 97062 | (503) 747-2261 | Info@VersaLogic.com | www.VersaLogic.com
C
O
R
P
O
R
A
T
I
O
N
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising