Quick Start Guide
Prep
paration
p
Shoo
oting
o
The battery pack
The lens
1
1
Charge the battery pack until the
CHARGE lamp lights off.
The memory card
Date/time setup
Remove the caps.
1
Playb
yback
yb
b
1 Set the mode dial to AUTO.
Press
Turn the camera on.
2 Look into the viewfinder.
CHARGE lamp
2
 Adjust the diopter-adjustment dial if the
 Do not touch inside parts.
 If dust enters the camera, it may
appear on the photo image. Do not
leave the camera and lens without
the caps. When you change the lens,
do it quickly in a location free from
dust.
Insert the battery pack into the camera.
2
Attach the lens.
 Align the marks.
To delete the image
.
3 Press the shutter button
halfway down to focus.
 Pressing the shutter button halfway
down and holding it activates the
autofocus.
4 Press the shutter button fully
down to shoot.
 Turn the lens until it clicks.
To return to the shooting mode:
Press
Face side with
a label
 When inserting a memory card, turn the
To play back a previous or next image: press /
on the controller.
Set up the date/time.
Support the lens from
below.
camera off.
 For available memory cards, refer to the
Instruction Manual.
Firmly insert the battery pack all the
way while pressing the lock lever with
the tip of the battery.
camera.
focus of the viewfinder is not achieved.
2
.
To fully enjoy the features of your single lens reflex
camera, consult the “Instruction Manual.”
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising