Quick Start Guide
DSLR-A330/A380
Preparation
The battery pack
1 Charge the battery pack until the
CHARGE lamp lights off.
For customers in the U.S.A. and Canada
Shooting
The lens
1 Remove the body cap on the camera
and packaging lid on the rear of the
lens.
1 Open the memory card cover.
Date/time setup
1 Turn the camera on.
1 Set the mode dial to AUTO.
Press
 Check that the LIVE VIEW/OVF switch is
.
set to “LIVE VIEW.”
LIVE VIEW/OVF switch
CHARGE lamp
The memory card
Playback
For customers in countries/regions
other than the U.S.A. and Canada
appear on the photo image. Do not
leave the camera and lens without
the caps. When you change the lens,
do it quickly in a location free from
dust.
Power cord (mains lead)
CHARGE lamp
 Do not touch inside parts.
 If dust enters the camera, it may
2 Insert a memory card and select the
type of the memory card you want to
use using the memory card switch.
Face side (SD memory card)
2 Mount the lens by aligning the index
marks as illustrated.
Support the lens from
below.
shooting.
To play back a previous or next image: press /
on the control button.
To return to the shooting mode:
To delete the image
Press
.
3 Press the shutter button
halfway down to focus.
down and holding it activates the
autofocus.
Terminal part
 When inserting a memory card, turn the
 Turn the lens until it clicks.
 Remove the lens cap during
Control button
 Pressing the shutter button halfway
Face side (“Memory Stick PRO
Duo”)
Hold the grip of the
camera.
2 Set up the date/time.
Terminal part
2 Insert the battery pack into the camera.
Firmly insert the battery pack all the
way while pressing the lock lever with
the tip of the battery.
2 Check the subject on the LCD
monitor.
4 Press the shutter button fully
down to shoot.
camera off.
 For available memory cards, refer to the
Instruction Manual.
To fully enjoy the features of your single lens reflex
camera, consult the “Instruction Manual.”
Download PDF

advertising