Sony DSLR-A390L Quick start guide

Quick Start Guide
Prep
paration
p
The battery pack
1
Charge the battery pack until the
CHARGE lamp lights off.
Shoo
oting
o
The lens
1
For customers in the U.S.A. and Canada
Remove the body cap on the camera
and packaging lid on the rear of the
lens.
The memory card
1
Open the memory card cover.
Date/time setup
1
Turn the camera on.
Press
 Check that the LIVE VIEW/OVF switch is
.
set to “LIVE VIEW.”
LIVE VIEW/OVF switch
CHARGE lamp
2
 Do not touch inside parts.
 If dust enters the camera, it may
For customers in countries/regions
other than the U.S.A. and Canada
appear on the photo image. Do not
leave the camera and lens without
the caps. When you change the lens,
do it quickly in a location free from
dust.
Power cord (mains lead)
2
CHARGE lamp
2
Playb
yback
yb
b
Insert a memory card and select the
type of the memory card you want to
use using the memory card switch.
Face side (SD memory card)
2
Support the lens from
below.
 When inserting a memory card, turn the
shooting.
To return to the shooting mode:
To delete the image
Press
.
 Pressing the shutter button halfway
down and holding it activates the
autofocus.
Terminal part
Firmly insert the battery pack all the
way while pressing the lock lever with
the tip of the battery.
To play back a previous or next image: press /
on the control button.
3 Press the shutter button
halfway down to focus.
Face side (“Memory Stick PRO
Duo”)
 Turn the lens until it clicks.
 Remove the lens cap during
Hold the grip of the
camera.
Set up the date/time.
Terminal part
Mount the lens by aligning the index
marks as illustrated.
Insert the battery pack into the camera.
2 Check the subject on the LCD
monitor.
camera off.
 For available memory cards, refer to the
Instruction Manual.
4 Press the shutter button fully
down to shoot.
To fully enjoy the features of your single lens reflex
camera, consult the “Instruction Manual.”

×

Was this manual useful for you? Yes No

Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project