Sony BDV-N7100W Operating Instructions

Add to my manuals
88 Pages

advertisement

Sony BDV-N7100W Operating Instructions | Manualzz

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\010COV.fm

masterpage: Right

4-456-334-12(1)

Blu-ray Disc™/

DVD Home Theatre

System

Operating Instructions

BDV-N9100W/BDV-N8100W/BDV-N7100W

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\020REG.fm

masterpage: Left

WARNING

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc.

Do not expose the appliance to naked flame sources (for example, lighted candles).

Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire.

To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

Indoor use only.

CAUTION

The use of optical instruments with this product will increase eye hazard.

As the laser beam used in this Blu-ray Disc/

DVD Home Theatre System is harmful to eyes, do not attempt to disassemble the cabinet.

Refer servicing to qualified personnel only.

Pick-up unit of this appliance is classified as a

CLASS 3R LASER product. Visible and invisible laser radiation is emitted when the laser protective housing is opened, so be sure to avoid direct eye exposure.

This marking is located on the bottom exterior.

This appliance is classified as a CLASS 1

LASER product. This marking is located on the bottom exterior.

For the main unit

The nameplate is located on the bottom exterior.

For the customers in the

U.S.A.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

These following indications are located on the bottom exterior.

This symbol is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

Owner’s Record

The model and serial numbers are located on the bottom exterior of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model No._____________________________

Serial No._____________________________

The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations.

2

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\020REG.fm

masterpage: Right

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna

(aerial).

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/

TV technician for help.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals in order to meet FCC emission limits.

Blu-ray Disc/DVD receiver

(HBD-N9100W/HBD-N8100W/

HBD-N7100W)

This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in

Supplement C to OET65.

This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

For the wireless transceiver

(EZW-RT50)

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in

Supplement C to OET65.

This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

3

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\020REG.fm

masterpage: Left

Important Safety

Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

For the customers in

Canada

To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance.

Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals.

For the main unit

The serial number is located on the bottom exterior.

Blu-ray Disc/DVD receiver

(HBD-N9100W/HBD-N8100W/

HBD-N7100W)

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.

This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

4

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\020REG.fm

masterpage: Right

For the wireless transceiver

(EZW-RT50)

This Class B digital apparatus complies with

Canadian ICES-003.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.

This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

Precautions

On power sources

• The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off.

• As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.

On watching 3D video images

Some people may experience discomfort

(such as eye strain, fatigue, or nausea) while watching 3D video images. Sony recommends that all viewers take regular breaks while watching 3D video images. The length and frequency of necessary breaks will vary from person to person. You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images until the discomfort ends; consult a doctor if you believe necessary. You should also review (i) the instruction manual and/or the caution message of any other device used with, or Blu-ray Disc contents played with this product and (ii) our website

(http://esupport.sony.com/) for the latest information. The vision of young children

(especially those under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video images.

Adults should supervise young children to ensure they follow the recommendations listed above.

Copy Protection

• Please be advised of the advanced content protection systems used in both Blu-ray Disc and DVD media. These systems, called

AACS (Advanced Access Content System) and CSS (Content Scramble System), may contain some restrictions on playback, analog output, and other similar features.

The operation of this product and the restrictions placed may vary depending on the date of purchase, as the governing board of the AACS may adopt or change its restriction rules after the time of purchase.

5

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\020REG.fm

masterpage: Left

• Cinavia Notice

This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.

More information about Cinavia technology is provided at the Cinavia Online Consumer

Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information

Center, P.O. Box 86851, San Diego, CA,

92138, USA.

Copyrights and Trademarks

• This system incorporates with Dolby*

Digital and Dolby Pro Logic adaptive matrix surround decoder and the DTS** Digital

Surround System.

* Manufactured under license from

Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

** Manufactured under license under

U.S. Patent Nos: 5,956,674;

5,974,380; 6,226,616; 6,487,535;

7,212,872; 7,333,929; 7,392,195;

7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the

Symbol together are registered trademarks of DTS, Inc. Product includes software. © DTS, Inc. All

Rights Reserved.

• This system incorporates High-Definition

Multimedia Interface (HDMI

TM

) technology.

The terms HDMI and HDMI High-

Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

• Java is a trademark of Oracle and/or its affiliates.

• “DVD logo” is a trademark of DVD Format/

Logo Licensing Corporation.

• “Blu-ray Disc”, “Blu-ray”, “Blu-ray 3D”,

“BD-LIVE”, “BONUSVIEW”, and logos are trademarks of the Blu-ray Disc

Association.

• “Blu-ray Disc”, “DVD+RW”, “DVD-RW”,

“DVD+R”, “DVD-R”, “DVD VIDEO”, and

“CD” logos are trademarks.

• “Super Audio CD” is a trademark.

• “BRAVIA” is a trademark of Sony

Corporation.

• “AVCHD 3D/Progressive” and the

“AVCHD 3D/Progressive” logo are trademarks of Panasonic Corporation and

Sony Corporation.

• , “XMB”, and “xross media bar” are trademarks of Sony Corporation and Sony

Computer Entertainment Inc.

• “PlayStation” is a registered trademark of

Sony Computer Entertainment Inc.

• “Sony Entertainment Network logo” and

“Sony Entertainment Network” are trademarks of Sony Corporation.

6

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\020REG.fm

masterpage: Right

• Music and video recognition technology and related data are provided by Gracenote

®

.

Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com.

CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000-present Gracenote.

Gracenote Software, copyright © 2000present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a nonexhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID,

MediaVOCS, the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either a registered trademark or a trademark of Gracenote, Inc. in the United

States and/or other countries.

• Wi-Fi

®

, Wi-Fi Protected Access

®

Alliance

®

Alliance.

and Wi-Fi

are registered marks of the Wi-Fi

• Wi-Fi CERTIFIED™, WPA™, WPA2™ and Wi-Fi Protected Setup™ are marks of the Wi-Fi Alliance.

• The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United

States and in other countries.

• Android is a trademark of Google Inc.

• The Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by Sony

Corporation is under license. Other trademarks and trade names are those of their respective owners.

• MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and

Thomson.

• This product incorporates proprietary technology under license from Verance

Corporation and is protected by U.S. Patent

7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation.

Copyright 2004-2010 Verance Corporation.

All rights reserved by Verance. Reverse engineering or disassembly is prohibited.

• Windows Media is either a registered trademark or trademark of Microsoft

Corporation in the United States and/or other countries.

This product is protected by certain intellectual property rights of Microsoft

Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

Content owners use Microsoft

®

PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses

PlayReady technology to access PlayReadyprotected content and/or WMDRMprotected content. If the device fails to properly enforce restrictions on content usage, content owners may require

Microsoft to revoke the device’s ability to consume PlayReady-protected content.

Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

• DLNA™, the DLNA Logo and DLNA

CERTIFIED™ are trademarks, service marks, or certification marks of the Digital

Living Network Alliance.

7

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\020REG.fm

masterpage: Left

• Opera

®

Devices SDK from Opera Software

ASA. Copyright 1995-2013 Opera Software

ASA. All rights reserved.

• All other trademarks are trademarks of their respective owners.

• Other system and product names are generally trademarks or registered trademarks of the manufacturers. ™ and ® marks are not indicated in this document.

End User License

Information

Gracenote

®

End User License

Agreement

This application or device contains software from Gracenote, Inc. of Emeryville, California

(“Gracenote”). The software from Gracenote

(the “Gracenote Software”) enables this application to perform disc and/or file identification and obtain music-related information, including name, artist, track, and title information (“Gracenote Data”) from online servers or embedded databases

(collectively, “Gracenote Servers”) and to perform other functions. You may use

Gracenote Data only by means of the intended

End-User functions of this application or device.

You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote

Servers for your own personal noncommercial use only. You agree not to assign, copy, transfer or transmit the Gracenote

Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR

EXPLOIT GRACENOTE DATA, THE

GRACENOTE SOFTWARE, OR

GRACENOTE SERVERS, EXCEPT AS

EXPRESSLY PERMITTED HEREIN.

You agree that your non-exclusive license to use the Gracenote Data, the Gracenote

Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the

Gracenote Software, and Gracenote Servers.

Gracenote reserves all rights in Gracenote

Data, the Gracenote Software, and the

Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that

Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name.

The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service.

The Gracenote Software and each item of

Gracenote Data are licensed to you “AS IS.”

Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the

Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that

Gracenote deems sufficient. No warranty is made that the Gracenote Software or

Gracenote Servers are error-free or that functioning of Gracenote Software or

Gracenote Servers will be uninterrupted.

Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time.

8

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\020REG.fm

masterpage: Right

GRACENOTE DISCLAIMS ALL

WARRANTIES EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO,

IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, TITLE, AND

NON-INFRINGEMENT. GRACENOTE

DOES NOT WARRANT THE RESULTS

THAT WILL BE OBTAINED BY YOUR

USE OF THE GRACENOTE SOFTWARE

OR ANY GRACENOTE SERVER. IN NO

CASE WILL GRACENOTE BE LIABLE

FOR ANY CONSEQUENTIAL OR

INCIDENTAL DAMAGES OR FOR ANY

LOST PROFITS OR LOST REVENUES.

© Gracenote, Inc. 2009

About These Operating

Instructions

• The instructions in these Operating

Instructions describe the controls on the remote control. You can also use the controls on the main unit if they have the same or similar names as those on the remote control.

• In this manual, “disc” is used as a general reference for BDs, DVDs, Super Audio CDs, or CDs unless otherwise specified by the text or illustrations.

• The instructions in this manual are for

BDV-N9100W, BDV-N8100W and

BDV-N7100W. BDV-N9100W is the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, “BDV-N9100W only”.

• Some illustrations are presented as conceptual drawings, and may be different from the actual products.

• The items displayed on the TV screen may vary depending on the area.

• The default setting is underlined.

9

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\010COVTOC.fm

masterpage: Left

Table of Contents

About These Operating Instructions .... 9

Unpacking .......................................... 12

Guide to Parts and Controls ............... 15

Getting Started

Step 1: Installing the

Speakers .............................. 21

Step 2: Connecting the

System ................................. 22

Connecting the speakers ....... 22

Connecting the TV .................. 24

Connecting the other equipment

(Set-top box, etc.) ............... 25

Connecting the antenna

(aerial) .................................. 27

Step 3: Preparing for Network

Connection .......................... 27

Step 4: Setting up the Wireless

System ................................. 29

Step 5: Performing the Easy

Setup .................................... 31

Step 6: Selecting the Playback

Source .................................. 32

Step 7: Enjoying Surround

Sound ................................... 32

Playback

Playing a Disc .................................... 34

Playing from a USB Device ............... 36

Enjoying music from a Bluetooth device .......................................... 37

Connecting to a smartphone by

One-touch listening function

(NFC) .......................................... 39

Playing via a Network ........................ 40

Available Options .............................. 44

Sound Adjustment

Selecting the Audio Format,

Multilingual Tracks, or

Channel ....................................... 46

Enjoying Multiplex Broadcast

Sound .......................................... 47

Tuner

Listening to the Radio ........................ 47

Other Operations

Using the Control for HDMI Function for “BRAVIA” Sync ................... 49

Calibrating the Appropriate Speaker

Settings Automatically ................ 50

Setting the Speakers ........................... 51

Using the Sleep Timer ........................ 52

Deactivating the Buttons on the Main

Unit .............................................. 53

Controlling Your TV or Other

Equipment with the Supplied

Remote Control ........................... 53

Saving Power in Standby Mode ......... 55

Browsing Websites ............................. 55

Further Settings for the Wireless

System ......................................... 57

10

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\010COVTOC.fm

Settings and

Adjustments

Using the Setup Display .................... 58

[Remote Control Setting Guide] ........ 59

[Network Update] .............................. 59

[Screen Settings] ................................ 59

[Audio Settings] ................................. 61

[BD/DVD Viewing Settings] ............. 63

[Parental Control Settings] ................. 63

[Music Settings] ................................. 64

[System Settings] ............................... 64

[External Input Settings] .................... 65

[Network Settings] ............................. 65

[Easy Network Settings] .................... 66

[Resetting] .......................................... 66

Additional Information

Precautions ......................................... 67

Notes about Discs .............................. 69

Troubleshooting ................................. 70

Playable Discs .................................... 76

Playable Types of Files ...................... 77

Supported Audio Formats .................. 78

Specifications ..................................... 79

Language Code List ........................... 82

Index .................................................. 84

masterpage: Right

11

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\030UNP.fm

masterpage: Left

Unpacking

• Operating Instructions

• Quick Setup Guide

• Speaker Installation Guide

• Remote control (1)

• R03 (size AAA) batteries (2)

• FM wire antenna (aerial) (1) or

• Calibration mic (1)

• Surround amplifier (1)

• Wireless transceivers (2)

BDV-N9100W only

• Front speakers (2)

• Surround speakers (2)

• Center speaker (1)

• Subwoofer (1)

12

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\030UNP.fm

• Speaker cords (5, red/white/gray/blue/ green)

BDV-N8100W only

• Front speakers (2)

• Bases (4)

• Lower parts of the front and surround speakers (4)

• Surround speakers (2) masterpage: Right

• Screws (16)

• Center speaker (1)

• Subwoofer (1)

• Speaker cords (5, red/white/gray/blue/ green)

13

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\030UNP.fm

masterpage: Left

• Bases (2)

• Lower parts of the front speakers (2)

• Surround speakers (2)

• Center speaker (1)

• Stands (for surround speakers) (2)

• Subwoofer (1)

• Screw hole covers (2)

• Screws (10)

BDV-N7100W only

• Front speakers (2)

• Speaker cords (5, red/white/gray/blue/ green)

• Stands (for front and surround speakers)

(4)

• Screw hole covers (4)

• Screws (4)

14

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\030UNP.fm

masterpage: Right

Guide to Parts and Controls

For more information, refer to the pages indicated in parentheses.

Main unit

Top and front panel

2 3 4 5

6

1 0

A "/1 (on/standby)

Turns on the main unit, or sets it to standby mode.

B Disc lid (page 34)

C LED indicator

White: Lights up when the main unit is turned on.

Blue (for Bluetooth status):

– System is ready for pairing: Flashes quickly

– During pairing: Flashes quickly

– During connection: Flashes

– Connection is established: Lights up

D Top panel display

9 8 7 Slot

E

(N-Mark) (page 39)

Position the NFC-compatible device near this indication to activate the NFC function.

F Soft-touch buttons/indicators

FUNCTION (page 32)

Selects the playback source.

N

* (play) x

*

(stop)

VOL +/–

* Touch and hold N on the main unit for more than 2 seconds, the built-in sound demonstration will be played back on the system. Touch x to stop the demonstration.

15

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\030UNP.fm

Note

During the demonstration, the volume level may be higher than the volume level you have set.

G

(USB) port (page 36)

Place your fingernail in the slot to open the cover.

H ./> (previous/next)

I (remote control sensor)

J Z (open/close)

About soft-touch buttons/ indicators

These buttons function when the soft-touch button indicators are lit.

You can turn on/off the indicators by

setting [Main Unit illumination] (page 64).

When you set [Main Unit illumination] to

[Auto], the indicators turn off. In this case, touch any soft-touch button. When the indicators light up, touch the button you want.

If you touch any button when the indicators are off, the indicators light up for a few seconds. If you touch the N again, the N indicator flashes for a few seconds and lights up during playback.

Note

• These buttons work when you touch them lightly. Do not press on them with excessive force.

• If the button does not work, release the button and wait for a few seconds. Then, touch the button again with your finger covering the button indicator.

masterpage: Left

16

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\030UNP.fm

Indicators in the top panel display

masterpage: Right

A Lights up when stereo sound is received. (Radio only)

B Lights up when repeat play is activated.

C Lights up when the system is playing via the PARTY

STREAMING function.

D Lights up when muting is on.

E Lights up when the HDMI (OUT) jack is correctly connected to an

HDCP (High-bandwidth Digital

Content Protection) compliant equipment with HDMI or DVI

(Digital Visual Interface) input.

F Displays the system’s status, such as radio frequency, etc.

When you press DISPLAY, the stream information/decoding status is displayed when the function is set to

“TV”.

The stream information/decoding status may not appear depending on the stream or item being decoded.

Note

When the [Main Unit illumination] is set to

[Auto] in [System Settings], the top panel display lights off if you do not operate the main unit for about 10 seconds.

17

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\030UNP.fm

Rear panel

masterpage: Left

1 2 3

9

A A.CAL MIC jack (pages 31, 50)

B AUDIO (AUDIO IN L/R) jacks

(page 25)

C ANTENNA (FM COAXIAL 75 )

jack (page 27)

D TV (DIGITAL IN OPTICAL) jack

(page 24)

Surround amplifier

Front panel

8 7 6 5 4

E HDMI (OUT) jack (page 24)

F HDMI (IN 1/IN 2) jacks (page 25)

G LAN (100) terminal (page 27)

H Wireless transceiver slot

(page 29)

I SPEAKERS jacks (page 22)

Rear panel

1 2

A "/1 (on/standby)

B LINK/STANDBY indicator

(page 30)

You can check the status of wireless transmission between the main unit and surround amplifier.

3 4 5

C Wireless transceiver

(EZW-RT50) slot

D SECURE LINK button (page 57)

Starts the Secure Link function.

E SPEAKERS jacks

18

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\030UNP.fm

masterpage: Right

Remote control

The following buttons description is only

for the system operation. See “Controlling

Your TV or Other Equipment with the

Supplied Remote Control” (page 53) for

the buttons to operate the connected equipment.

1

2

3

4

5

6

7

8

• Number 5, AUDIO, N, and CH + buttons have a tactile dot. Use the tactile dot as a reference when operating the remote control.

• The buttons printed in yellow are activated after pressing the TV or STB operation mode button.

The system automatically returns to standby mode

If any button on the main unit or remote control is not pressed within 30 minutes, the system automatically returns to standby mode.

A Z (open/close)

Opens or closes the disc lid.

SPEAKERS TV yAUDIO

Selects whether TV sound is output from the system’s speakers or the TV’s speaker(s). This function works only when you set [Control for HDMI] to

[On] (page 64).

AV "/1 (on/standby) (page 53)

Turns on the TV or other equipment, or sets it to standby mode.

"/1 (on/standby) (pages 31, 48)

Turns on the system or sets it to standby mode.

B BLUETOOTH (pages 37, 38)

Selects the “BT” function.

When the blue LED indicator lights off during “BT” function, press to start pairing or connect to paired Bluetooth device.

Operation mode buttons

(page 53)

Changes the equipment to be operated using the remote control.

STB: You can operate a cable box, digital satellite receiver, digital video receiver, etc.

TV: You can operate a TV.

BD: You can operate this system.

C Number buttons (pages 48, 53)

Enters the title/chapter numbers, preset station number, etc.

ENTER

Enters the selected item.

19

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\030UNP.fm

masterpage: Left

D Color buttons

Short cut keys for selecting items on some BD menus (can also be used for

Java interactive operations on BDs).

E TOP MENU

Opens or closes the BD’s or DVD’s

Top Menu.

POP UP/MENU

Opens or closes the BD-ROM’s Popup Menu, or the DVD’s menu.

OPTIONS (pages 33, 44, 56)

Displays the options menu on the TV screen or in the top panel display. (The location differs depending on the selected function.)

RETURN

Returns to the previous display.

B/V/v/b

Moves the highlight to a displayed item.

(enter)

Enters the selected item.

F NETFLIX

Accesses the “NETFLIX” online service.

HOME (pages 32, 51, 58)

Enters or exits the system’s home menu.

SEN

Accesses the “Sony Entertainment

Network™” online service.

FOOTBALL (page 34)

Produces optimized sound for watching football match broadcasting.

FUNCTION (page 32)

Selects the playback source.

By setting [External Input Settings]

(page 65), you can skip unused inputs

when selecting a function.

SOUND MODE (page 33)

Selects the sound mode.

AUDIO (page 46)

Selects the audio format/track.

SUBTITLE

Selects the subtitle language when multilingual subtitles are recorded on a

BD-ROM/DVD VIDEO.

DISPLAY (pages 36, 41, 48, 55)

Displays playback and web browsing information on the TV screen.

Displays the preset radio station, frequency, etc., in the top panel display.

MUSIC EQ (page 33)

Selects the pre-programmed equalizer when listening to music.

G Playback operation buttons

See “Playback” (page 34).

m/M (fast/slow/freeze frame)

Fast reverse/fast forward during playback. Each time you press the button, the search speed changes.

Activates slow-motion play when pressed for more than one second in pause mode.

Plays one frame at a time when pressed in pause mode.

Note

During Blu-ray 3D Disc playback, slowmotion reverse play and single-frame reverse play are not available.

./> (previous/next)

Selects the previous/next chapter, track, or file.

N PLAY

Starts or re-starts playback (resume play).

Activates One-Touch Play (page 49)

when the system is on and set to the

“BD/DVD” function.

X PAUSE

Pauses or re-starts playback.

20

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Right x STOP

Stops playback and remembers the stop point (resume point). The resume point for a title/track is the last point you played or the last photo for a photo folder.

Stops the built-in sound demonstration.

Radio operation buttons

See “Tuner” (page 47).

TUNING +/–

PRESET +/–

H MUTING

Turns off the sound temporarily.

VOL +/–

Adjusts the volume.

SLEEP (page 52)

Sets the sleep timer.

Getting Started

Step 1: Installing the

Speakers

Install the speakers by referring to the illustration below.

A Front left speaker (L)

B Front right speaker (R)

C Center speaker

D Surround left speaker (L)

E Surround right speaker (R)

F Subwoofer

G TV

Installing the surround speakers in rear position

(Speaker layout: [Standard])

A G C B

F

D E

Installing all speakers in front position

(Speaker layout: [All Front])

D A G C B E

F

21

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Left

Note

• Be sure to select the speakers layout setting

(page 51) according to your speakers

placement.

• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result.

• Do not lean or hang on a speaker, as it may fall down.

• The speakers of this system are not magnetically shielded. This may result in color irregularity when they are placed near a CRT TV or projector.

Tip

• In order to output more effective sound when

[All Front] setting is selected, we recommend you to install your front speakers and surround speakers closer to each other.

• You can install the speakers on a wall. For details, refer to the supplied “Speaker

Installation Guide”.

Connecting the speakers

Connect the speaker cords to match the color of the SPEAKERS jacks of the main unit and surround amplifier.

When connecting to the main unit and surround amplifier, insert the connector until it clicks.

To the main unit

Red

(Front right speaker (R))

Purple

(Subwoofer)

Step 2: Connecting the

System

Do not connect the AC power cord (mains lead) of the main unit to a wall outlet

(mains) until all the other connections are made.

To assemble the speakers, refer to the supplied “Speaker Installation Guide”.

Note

When you connect other equipment with a volume control, turn down the volume of the equipment to a level where sound is not distorted.

White

(Front left speaker (L))

Green

(Center speaker)

22

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

To the surround amplifier

Blue

(Surround left speaker (L))

Gray

(Surround right speaker (R)) masterpage: Right

23

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Left

Connecting the TV

Select one of the following connection methods according to the input jacks on your TV.

C

A B

Video connection

A

HDMI cable

1)

(not supplied) or

2)

1)

High Speed HDMI cable

2)

If the HDMI IN jack of your TV is compatible with the ARC (Audio Return Channel) function, digital audio signal can be output from the TV via an HDMI cable connection. For setting the ARC function,

see [Audio Return Channel] (page 64).

Audio connections

If you do not connect the system to the TV’s HDMI jack that is compatible with the ARC function, make an appropriate audio connection for listening to TV sound via the system’s speakers.

B High quality

Optical digital cord (not supplied)

DIGITAL OUT

OPTICAL

C

Audio cable (not supplied)

AUDIO

OUTPUT

L

R

Standard quality

24

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Right

Connecting the other equipment (Set-top box, etc.)

Connect the system, TV and other equipment as follows.

TV

Video out*

Equipment

(Set-top box, VCR, PlayStation

®

, or digital satellite receiver, etc.)

A B, C

System

Signal flow

: Video signal

: Audio signal

* This connection is unnecessary for connection A (HDMI connection).

Select one of the following connection methods according to the jack type of the equipment.

C

A B

25

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Left

A

B

HDMI cable* (not supplied)

* High Speed HDMI cable

Optical digital cord (not supplied)

High quality

HDMI OUT

DIGITAL OUT

OPTICAL

C

Audio cable (not supplied)

AUDIO

OUTPUT

R

L

When you make connection

A

This connection can transmit both video and audio signals.

Standard quality

Note

• Video signals from the HDMI (IN 1/2) jacks are output to the HDMI (OUT) jack only when the

“HDMI1” or “HDMI2” function is selected.

• To output an audio signal from the HDMI (IN 1/2) jacks to the HDMI (OUT) jack, you may need to

change the audio output setting. For details, see [Audio Output] in [Audio Settings] (page 62).

When you make connection

B

,

C

Connect the system so that video signals from the system and other equipment are output to the TV, and audio signals from the equipment are output to the system as follows.

Note

• If you make either connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings]

to [Off] (page 64).

• You can enjoy equipment sound by selecting the “AUDIO” function for connection C.

26

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Right

Connecting the antenna

(aerial)

Rear of the main unit

or

Step 3: Preparing for

Network Connection

Tip

To connect the system to your network, perform

[Easy Network Settings]. For details, see “Step 5:

Performing the Easy Setup” (page 31).

Select the method based on your LAN

(Local Area Network) environment.

• If you use a wireless LAN

The system has built-in Wi-Fi, and you can connect the system to the network by making the network settings.

• If you use other than a wireless LAN

Use a LAN cable to connect to the LAN

(100) terminal on the main unit.

FM wire antenna (aerial)

(supplied)

Note

• Be sure to fully extend the FM wire antenna

(aerial).

• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.

Tip

If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the main unit to an outdoor FM antenna (aerial).

Broadband router

LAN cable (not supplied)

Tip

A shielded interface cable (LAN cable), straight or crossover, is recommended.

27

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Left

Before performing the network settings

When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)compatible, you can easily set the network settings with the WPS button.

If not, check the following information in advance, and record it in the space provided below.

• The network name (SSID*) that identifies your network**.

• If security is set on your wireless network, the security key (WEP key,

WPA key)**.

* SSID (Service Set Identifier) is a name that identifies a particular wireless network.

** You need to check the settings of your wireless

LAN router to get the information about SSID and security key. For details:

– visit the following website: http://www.sony.com/blurayhtsupport/

– refer to the operating instructions supplied with the wireless LAN router

– consult the manufacturer of the wireless

LAN router

About wireless LAN security

Since communication via the wireless LAN function is established by radio waves, the wireless signal may be susceptible to interception. To protect wireless communication, this system supports various security functions. Be sure to correctly configure the security settings in accordance with your network environment.

x No Security

Although you can easily make settings, anyone can intercept wireless communication or intrude into your wireless network, even without any sophisticated tools. Keep in mind that there is a risk of unauthorized access or interception of data.

x WEP

WEP applies security to communications to prevent outsiders from intercepting communications or intruding into your wireless network. WEP is a legacy security technology that enables older devices which do not support TKIP/AES to be connected.

x WPA-PSK (TKIP), WPA2-PSK

(TKIP)

TKIP is a security technology developed in response to the deficiencies of WEP. TKIP assures a higher security level than WEP.

x WPA-PSK (AES), WPA2-PSK

(AES)

AES is a security technology that uses an advanced security method distinct from

WEP and TKIP. AES assures a higher security level than WEP or TKIP.

28

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Right

Step 4: Setting up the

Wireless System

The main unit transmits sound to the surround amplifier that is connected to the surround speakers. To activate wireless transmission, perform the following Steps.

1

Insert the wireless transceiver into the main unit.

Rear panel of the main unit

3

Connect the AC power cord

(mains lead) of the main unit.

Before connecting the AC power cord,

make sure all connections in “Step 2:

Connecting the System” (page 22) are

secure.

4

Press "/1 to turn on the system.

"/1

5

Connect the AC power cord

(mains lead) of the surround amplifier.

LINK/STANDBY indicator

Wireless transceiver

2

Insert the wireless transceiver into the surround amplifier.

Rear panel of the surround amplifier

When wireless transmission is activated, the LINK/STANDBY indicator turns green.

If the LINK/STANDBY indicator does

not turn on, see “Wireless sound”

(page 72).

Wireless transceiver

29

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Left

About the LINK/STANDBY indicator

The LINK/STANDBY indicator shows wireless transmission status, as follows.

Indicator

Turns green.

Turns orange.

Flashes red.

Status

The system is turned on, wireless transmission is activated and surround signals are being received.

The system is turned on, wireless transmission is activated with the Secure

Link function, and surround signals are being received.

Flashes green or orange slowly.

Turns red.

Turns off.

Wireless transmission is deactivated.

The surround amplifier is in standby mode while the system is in standby mode or wireless transmission is deactivated.

The surround amplifier is turned off.

Flashes green quickly.

The wireless transceiver is not inserted correctly into the wireless transceiver slot.

The surround amplifier’s protection is active.

About the standby mode

The surround amplifier enters standby mode automatically when the main unit is in standby mode or wireless transmission is deactivated.

The surround amplifier turns on automatically when the main unit is turned on and wireless transmission is activated.

To specify the wireless connection

If you use multiple wireless products or your neighbors use wireless products, interference may occur. To prevent this, you can specify the wireless connection to link the main unit to the surround amplifier

(Secure Link function). For details, see

“Further Settings for the Wireless System”

(page 57).

30

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Right

Step 5: Performing the

Easy Setup

Before performing Step 5

Follow the Steps below to make the basic adjustments and network settings for the system.

Displayed items vary depending on the area.

1

Insert two R03 (AAA) batteries

(supplied) by matching the 3

and # ends on the batteries to the markings inside the compartment.

5

Switch the input selector on your TV so that the signal from the system appears on the TV screen.

The [Easy Initial Settings] for OSD language selection appears.

6

Perform [Easy Initial Settings].

Follow the on-screen instructions to make the basic settings using B/V/v/b and .

B/V/v/b

2

Turn on the TV.

3

Connect the calibration mic to the A.CAL MIC jack on the rear panel.

Set up the calibration mic at ear level using a tripod, etc. (not supplied). The calibration mic should aim the TV screen. The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic.

4

Press [/1 to turn on the system.

For details about [Auto Calibration],

see “Calibrating the Appropriate

Speaker Settings Automatically”

(page 50).

7

After completing the [Easy Initial

Settings], press V/v to select

[Easy Network Settings], then press .

The [Easy Network Settings] display appears.

8

Follow the on-screen instructions to make the network settings using B/V/v/b and .

If the system cannot connect to the

network, see “Network connection”

(page 75) or “Wireless LAN connection” (page 75).

31

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Left

To recall the [Easy Network

Settings] display

1

Press HOME.

The home menu appears on the TV screen.

2

Press B/b to select [Setup].

3

Press V/v to select [Easy Network

Settings], then press .

Function and playback source

“TV”

Equipment (TV, etc.) that is connected to the

TV (DIGITAL IN OPTICAL) jack, or a TV compatible with the Audio Return Channel function that is connected to the HDMI

(OUT) jack (page 24)

“BT”

Audio contents of a Bluetooth device

“AUDIO”

Equipment that is connected to the AUDIO

(AUDIO IN L/R) jacks (page 25)

Tip

• Some functions may be changed via the TV screen by pressing FUNCTION, V/v, and .

• You can also press BLUETOOTH on the remote control to select “BT” function.

Step 6: Selecting the

Playback Source

Press FUNCTION repeatedly until the function you want appears in the top panel display.

When you press FUNCTION once, the current function appears in the top panel display, then each time you press

FUNCTION, the function changes cyclically as follows.

“BD/DVD” t “USB” t “FM” t

“HDMI1” t “HDMI2” t “TV” t

“BT” t “AUDIO”

Function and playback source

“BD/DVD”

Disc or network device to be played by the system

“USB”

USB device that is connected to the (USB)

port (page 15)

“FM”

FM radio (page 47)

“HDMI1”/“HDMI2”

Equipment that is connected to the HDMI

(IN 1) or HDMI (IN 2) jack (page 25)

Step 7: Enjoying

Surround Sound

After performing the previous Steps and starting playback, you can easily enjoy preprogrammed sound modes that are tailored to different kinds of sound sources. They bring the exciting and powerful sound into your home.

32

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\040GET.fm

masterpage: Right

Selecting the sound mode

Press SOUND MODE repeatedly during playback until the mode you want appears in the top panel display or on the TV screen.

Auto

The system automatically selects [Movie] or

[Music] to produce the sound effect depending on the disc or sound stream.

• 2-channel source: The system simulates surround sound from 2-channel sources and outputs sound from the 5.1 channel speakers.

• Multi-channel source: The system outputs sound from the speakers as it was recorded.

Movie

The system provides the optimized sound for watching movies.

Music

The system provides the optimized sound for listening to music.

Digital Music Enhancer

[Digital Music]

The system reproduces an enhanced sound for compressed audio.

3D Surround

[3D Surround] is a unique Sony algorithm that provides a 3D sound experience with depth and presence by creating a virtual sound field close to your ears.

Berlin Philharmonic Hall

[Philharmonic Hall]

The system reproduces the sound characteristics of a Berlin philharmonic hall for listening to a 2-channel stereo source such as CDs.

Night

Suitable for watching movies at night by reducing loud sounds while maintaining clear dialog.

Demo Sound

The system provides ear-catching sound, suitable for demonstration.

Tip

• If you set the sound mode to [Auto] and play

Internet content of the Berlin Philharmonic, the

[Philharmonic Hall] sound mode is automatically selected (only for areas that are offered the service).

• When the speaker layout is set to [All Front] and you play back multi-channel source, select

[Auto] or [3D Surround] to enjoy virtual surround sound.

To select the sound mode from the option menu

1

Press OPTIONS and V/v to select

[Sound Mode], then press .

2

Press V/v to select the sound mode, then press .

To select the preprogrammed music equalizer

Press MUSIC EQ repeatedly during playback.

You can select the sound to suit your preference.

Each time you press the button, the setting changes cyclically as follows.

[Standard] t [Rock] t [Hiphop] t

[Electronica]

You can also select the music equalizer by using the option menu in [Music] sound mode.

Note

The sound mode can be selected only when

[Sound Effect] is set to [Sound Mode On]

(page 62). When [Sound Effect] is set to other

than [Sound Mode On], the sound mode setting does not apply.

Tip

To enjoy 2-channel source such as a CD in multichannel output, we recommend you to select

[Auto].

33

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Left

Selecting the football mode

Press FOOTBALL while watching a football match broadcast.

You can experience a feeling of presence in the stadium when watching the football match broadcast.

• [Football : Narration On]: You can enjoy an immersive feeling of being in a football stadium through enhanced stadium cheers.

• [Football : Narration Off]: You can enjoy a more immersive feeling of being in a football stadium by minimizing the volume level of narration in addition to the enhancement of cheers.

• [Football Off]: The football mode is turned off.

Note

• We recommend you to select the football mode when watching a football match broadcast.

• If you hear unnatural sound in the content when

[Football : Narration Off] is selected,

[Football : Narration On] is recommended.

• The football mode will be turned off when you turn off the system.

• This feature does not support monaural sound.

Tip

• You can also select the football mode from the option menu.

• If 5.1 channel audio stream is available, we recommend you to select it on your TV or settop box.

Playback

Playing a Disc

For playable discs, see “Playable Discs”

(page 76).

1

Switch the input selector on your TV so that the signal from the system appears on your TV screen.

2

Press Z, and place a disc on the disc compartment until it clicks.

3

Press Z to close the disc lid.

Playback starts.

If playback does not start automatically, select in the

[Photo] category, and press .

34

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Right

Enjoying BONUSVIEW/

BD-LIVE

Some BD-ROMs with “BD-LIVE Logo*” have bonus content and other data that can be downloaded for enjoyment.

*

1

Connect the USB device to the

(USB) port (page 36).

For local storage, use a 1 GB or larger

USB memory.

2

Prepare for BD-LIVE (BD-LIVE only).

• Connect the system to a network

(page 27).

• Set [BD Internet Connection] to

[Allow] (page 63).

3

Insert a BD-ROM with

BONUSVIEW/BD-LIVE.

The operation method differs depending on the disc. Refer to the operating instructions of the disc.

Tip

To delete data in the USB memory, select [Delete

BD Data] in [Video], and press . All data stored in the buda folder will be deleted.

Enjoying Blu-ray 3D

You can enjoy Blu-ray 3D Discs with the

3D logo*.

*

1

Prepare for Blu-ray 3D Disc playback.

• Connect the system to your

3D-compatible TV using a High

Speed HDMI cable (page 24).

• Set [3D Output Setting] and [TV

Screen Size Setting for 3D] in

[Screen Settings] (page 59).

2

Insert a Blu-ray 3D Disc.

The operation method differs depending on the disc. Refer to the operating instructions supplied with the disc.

Tip

Refer also to the operating instructions of your

3D-compatible TV.

35

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Left

Displaying the playback information

You can check the playback information, etc., by pressing DISPLAY.

The displayed information differs depending on the disc type and system status.

Example: when playing a BD-ROM

Playing from a USB

Device

You can play video/music/photo files on a connected USB device.

For playable types of files, see “Playable

Types of Files” (page 77).

1

Connect the USB device to the

(USB) port.

Refer to the operating instructions of the USB device before connecting.

A Output resolution/Video frequency

B Title number or name

C The currently selected audio setting

D Available functions ( angle,

E Playback information

Displays play mode, playing status bar, disc type, video codec, bit rate, repeat type, elapsed time, total playing time

F Chapter number

G The currently selected angle

2

Press HOME.

The home menu appears on the TV screen.

3

Press B/b to select [Video],

[Music], or [Photo].

4

Press V/v to select [USB device], then press .

Note

Do not remove the USB device during operation. To avoid data corruption or damage to the USB device, turn the system off before connecting or removing the USB device.

36

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Right

Enjoying music from a

Bluetooth device

About the Bluetooth wireless technology

Bluetooth wireless technology is a shortrange wireless technology that enables wireless data communication between digital devices. Bluetooth wireless technology operates within a range of about

10 meters (33 feet).

You do not need wires to get connected as you do with a USB connection, and you do not need to place the devices face to face as you do with wireless infrared technology.

Bluetooth wireless technology is a global standard supported by thousands of companies. These companies produce products that meet the global standard.

Supported Bluetooth version and profiles

Profile refers to a standard set of capabilities for various Bluetooth product capabilities. This system supports the following Bluetooth version and profiles.

Supported Bluetooth version:

Bluetooth Specification version 3.0

Supported Bluetooth profiles:

A2DP 1.2 (Advanced Audio Distribution

Profile)

AVRCP 1.3 (Audio Video Remote Control

Profile)

Note

• To be able to use the Bluetooth function, the

Bluetooth device to be connected must support the same profile as this system. Even if the device supports the same profile, the functions may differ depending on the specifications of the Bluetooth device.

• The audio playback on this system may be delayed from that on the Bluetooth device because of the characteristics of the Bluetooth wireless technology.

Pairing this system with a Bluetooth device

Pairing is an operation where Bluetooth devices register with each other beforehand. Once a pairing operation is performed, it does not need to be performed again.

1

Place the Bluetooth device within 1 meter (3.3 feet) from the main unit.

2

Press BLUETOOTH.

You can also select [Bluetooth

AUDIO] from [Input] in home menu.

3

Set the Bluetooth device in pairing mode.

For details on setting the Bluetooth device in pairing mode, refer to the operating instructions supplied with the device.

4

Select “BLU-RAY HOME

THEATRE SYSTEM” on the

Bluetooth device display.

Perform this step within 5 minutes, otherwise pairing will be canceled.

Note

If passkey is required on the Bluetooth device, enter “0000”. Passkey may be called

“Passcode”, “PIN code”, “PIN number” or

“Password”.

37

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Left

5

Once pairing is completed, the device is automatically connected to the system.

Device name appears on the TV screen.

Note

You can pair up to 9 Bluetooth devices. If the 10th Bluetooth device is paired, the least recently connected device will be replaced by the new one.

6

Start playback on the Bluetooth device.

7

Adjust the volume.

Adjust the volume of the Bluetooth device first, if the volume level is still too low, adjust the volume level on the main unit.

To cancel pairing operation

Press HOME or FUNCTION.

Connecting to a

Bluetooth device from this system

You can connect to a Bluetooth device from this main unit.

Check the following before playing music:

– The Bluetooth function of the Bluetooth device is turned on.

– The pairing has been completed

(page 37).

1

Press BLUETOOTH.

2

Press OPTIONS.

Note

To connect to the most recent connected

Bluetooth device, press N. Then proceed to

Step 5.

3

Press V/v repeatedly to select

[Device List], then press .

A list of paired Bluetooth devices appears.

4

Press V/v repeatedly to select the device you want, then press

.

5

Press N to start playback.

6

Adjust the volume.

Adjust the volume of the Bluetooth device first, if the volume level is still too low, adjust the volume level on the main unit.

Note

Once the main unit and the Bluetooth device are connected, you can control playback by pressing

N, X, x, m/M and ./>.

To disconnect the

Bluetooth device

Press HOME, FUNCTION or RETURN.

To delete a paired Bluetooth device from the device list

1

Follow Steps 1 to 3 above.

2

Press V/v repeatedly to select the device, then press OPTIONS.

3

Press V/v repeatedly to select

[Remove], then press .

4

Follow the on-screen instructions to delete the device using B/V/v/b and

.

Note

While connected to a Bluetooth device, this system cannot be detected and a connection cannot be established from another Bluetooth device.

38

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Right

Connecting to a smartphone by Onetouch listening function

(NFC)

By holding an NFC-compatible smartphone near to the on the main unit, the main unit and smartphone proceed to complete pairing and the Bluetooth connection automatically.

Compatible smartphones

Smartphones with a built-in NFC function

(OS: Android 2.3.3 – 4.0.x excluding

Android 3.x)

What is “NFC”?

NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by holding the device near the on the NFC-compatible devices.

1

Download and install the app

“NFC Easy Connect”.

“NFC Easy Connect” is a free app for

Android smartphones that can be obtained on Google Play. Search for the app using the keyword “NFC Easy

Connect” on the site, or access the download site directly by reading the two-dimensional code below.

Note that “NFC Easy Connect” is free but data communication fees when downloading are charged separately.

Two-dimensional code* for direct access

* Use a two-dimensional code reader app.

Note

The app may not be available in some countries/regions.

2

Start the “NFC Easy Connect” app on the smartphone.

Make sure that the application screen is displayed.

3

Hold the smartphone near to the

on the main unit until the smartphone vibrates.

Vibration cue is provided when the smartphone is recognized by the main unit.

After being recognized by the main unit, follow the on-screen instructions displayed on the smartphone, and complete the procedure for Bluetooth connection.

When the Bluetooth connection is established, the blue LED indicator on the top panel stops flashing. The playback time appears in the top panel display.

39

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Left

Note

• The system only can recognizes and connects to one NFC-compatible device at a time.

• Depending on your smartphone, you may need to turn on the NFC function on your smartphone in advance. For details, refer to the operating instructions of the smartphone.

Tip

If pairing and the Bluetooth connection fail, do the following.

– Relaunch “NFC Easy Connect” and move the smartphone slowly over the .

– Remove the case from the smartphone if using a commercially available smartphone case.

To listen to music

Start playback of an audio source on the smartphone. For details on playback operations, refer to the operating instructions of your smartphone.

Tip

If the volume level is low, adjust the volume of the smartphone first. If the volume level is still too low, adjust the volume level on the main unit.

To stop playback

The playback will be stopped when you perform any of the following items:

– Hold the smartphone near to the on the main unit again.

– Stop the music player of the smartphone.

– Turn off the main unit or the smartphone.

– Change the function.

– Disable the Bluetooth function on the smartphone.

Playing via a Network

Enjoying Sony

Entertainment Network

(SEN)

Sony Entertainment Network serves as a gateway delivering selected Internet content and a variety of on-demand entertainment straight to your main unit.

Tip

• Some Internet content requires registration via a

PC before it can be played. For further details, visit the following website: http://www.sony.com/blurayhtsupport/

• Some Internet content may not be available in some countries/regions.

1

Prepare for Sony Entertainment

Network.

Connect the system to a network

(page 27).

2

Press SEN.

3

Press B/V/v/b to select the

Internet content and a variety of on-demand entertainment, then press .

40

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Right

Video streaming control panel

The control panel appears when a video file starts playing. The displayed items may differ depending on the Internet content provider.

To display again, press DISPLAY.

Playing files on a Home

Network (DLNA)

You can play video/music/photo files on other DLNA-certified equipment by connecting them to your home network.

This main unit can be used as a player and renderer.

• Server: Stores and shares digital media contents

• Player: Finds and plays digital media content from the DMS

• Renderer: Receives and plays files from the server, and can be operated by another equipment (controller)

• Controller: Operates the renderer equipment

Server

A Control display

Press B/V/v/b or for playback operations.

B Playing status bar

Status bar, cursor indicating the current position, playing time, duration of the video file

C Network condition indicator

Indicates signal strength for a wireless connection.

Indicates a wired connection.

D Network transmission speed

E The next video file name

F The currently selected video file name

Player

(This system)

Player

Prepare for using the DLNA function.

• Connect the system to a network

(page 27).

• Prepare other DLNA-certified equipment. For details, refer to the operating instructions of the equipment.

41

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Left

To play files stored on a

DLNA server via the system

(DLNA Player)

Select the DLNA server icon from

[Video], [Music], or [Photo] in the home menu, then select the file that you want to play.

Server

Player

(This system)

To play remote files by operating the system

(Renderer) via a DLNA controller

You can operate the system with a

DLNA-certified controller (a mobile phone, etc), when playing files stored on a

DLNA server.

Server

Playing the same music in different rooms

(PARTY STREAMING)

You can play the same music at the same time on all Sony equipment which are compatible with the PARTY

STREAMING function and connected to your home network.

Contents in [Music] and the “FM”,

“BT” and “AUDIO” functions can be used with the PARTY STREAMING function.

There are two kinds of PARTY

STREAMING-compatible equipment.

• PARTY host: Plays and sends music.

• PARTY guest: Plays music that is received from PARTY host.

This main unit can be used as a PARTY host or PARTY guest.

PARTY host

(This system)

Renderer

(This system)

PARTY guest

PARTY guest

Controller

For details on operation, refer to the operating instructions of the DLNA controller.

Note

Do not operate the system with the supplied remote control and a DLNA controller at the same time.

Tip

The system is compatible with the “Play To” function of Windows Media

®

Player 12 that comes standard with Windows 7.

Prepare for PARTY STREAMING.

• Connect the system to a network

(page 27).

• Connect equipment which is compatible with the PARTY STREAMING function.

42

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Right

To use the system as the

PARTY host

Select a track in [Music], a radio station

[Bluetooth AUDIO] in [Input], press OPTIONS. Then select [Start

PARTY] to start.

To close, press OPTIONS, then select

[Close PARTY].

Note

If content that is not compatible with the PARTY

STREAMING function is played, the system closes PARTY automatically.

To use the system as a

PARTY guest

Select [PARTY] in [Music], then select the PARTY host device icon.

To leave the PARTY, press OPTIONS, then select [Leave PARTY].

To close the PARTY, press OPTIONS, then select [Close PARTY].

Note

The sale and product lineup of products that are compatible with the PARTY STREAMING function differ depending on the area.

3

Press B/b to select [Video] or

[Music].

4

Press V/v to select [Video

Search] or [Music Search].

The content information (such as title, cast, track, or artist), [Playback

History] and [Search History] are displayed.

• [Playback History]

Displays a list of previously played

BD-ROM/DVD-ROM/CD-DA

(music CD) titles. Select a title to acquire content information.

• [Search History]

Displays a list of previous searches performed via the [Video Search] or

[Music Search] function.

To search for further related information

Select an item in the lists, then select the service for searches.

Searching for video/ music information

You can acquire content information using

Gracenote technology and search for related information.

1

Connect the system to a network

(page 27).

2

Insert a disc with content about which you want to search.

You can perform a video search from a

BD-ROM or DVD-ROM, and a music search from a CD-DA (music CD).

Using the TV SideView

TV SideView is a free mobile application for the remote device (smartphone, etc). By using the TV SideView with this system, you can easily enjoy the system by the operation on your remote device.

You can launch a service or application directly from the remote device and view the disc information during the disc playback. The TV SideView also can be used as a remote control and software keyboard.

Before you use the TV SideView device with this system for the first time, be sure to register the TV SideView device.

Follow the on-screen instructions on the

TV SideView device for registration.

Note

The registration will be possible only when home menu appears on the TV screen.

43

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Left

Available Options

Various settings and playback operations are available by pressing OPTIONS. The available items differ depending on the situation.

Common options

[Sound Mode]

Changes the sound mode setting (page 33).

[Football]

Selects the football mode (page 34).

[Repeat Setting]

Sets repeat playback.

[3D Menu]

[Simulated 3D]: Adjusts the simulated 3D effect.

[3D Depth Adjustment]: Adjusts the depth of

3D images.

[2D Playback]: Sets playback to 2D image.

[Play/Stop]

Starts or stops playback.

[Play from beginning]

Plays the item from the beginning.

[Start PARTY]

Starts a party with the selected source.

This item may not appear depending on the source.

[Leave PARTY]

Leaves a party which the system is participating in. The PARTY STREAMING function continues among other participating equipment.

[Close PARTY]

For PARTY host: Closes a party.

For PARTY guest: Closes a party which the system is participating in. The PARTY

STREAMING function ends for all other participating equipment.

[Change Category]

Switches among the [Video], [Music] and [Photo] category in “BD/DVD” (for disc only) or “USB” function. This item only available when the display list is available for the category.

44

US

[Video] only

[A/V SYNC]

Adjusts the time gap between picture and

sound (page 46).

[3D Output Setting]

Sets whether or not to output 3D video automatically.

Note

3D video from the HDMI (IN 1) or HDMI (IN 2) jack is output regardless of this setting.

[Video Settings]

• [Picture Quality Mode]: Selects the picture settings. [Auto], [Custom1], and [Custom2] are available for HDMI connections.

• [Texture Remaster]: Adjusts the sharpness and detail of the edges.

• [Super Resolution]: Improves the resolution.

• [Smoothing]: Reduces on-screen banding by smoothing gradations on flat areas.

• [Contrast Remaster]: Automatically arranges the black and white levels so that the screen is not too dark and the image is modulated.

• [Clear Black]: Adjusts the display of the dark elements of the image. All shading is not suppressed; it allows beautifully reproduced black tones.

[Pause]

Pauses playback.

[Top Menu]

Displays the BD’s or DVD’s Top Menu.

[Menu/Popup Menu]

Displays the BD-ROM’s Pop-up Menu or

DVD’s menu.

[Title Search]

Searches for a title on BD-ROMs/DVD

VIDEOs and starts playback from the beginning.

[Chapter Search]

Searches for a chapter and starts playback from the beginning.

[Audio]

Selects the audio format/track.

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\050PLA.fm

masterpage: Right

[Subtitle]

Selects the subtitle language when multilingual subtitles are recorded on

BD-ROMs/DVD VIDEOs.

[Angle]

Switches the viewing angles when multiangles are recorded on BD-ROMs/DVD

VIDEOs.

[IP Content NR Pro]

Adjusts the video quality for Internet content.

[Video Search]

Displays information on the BD-ROM/

DVD-ROM based on Gracenote technology.

[Music] only

[Add Slideshow BGM]

Registers music files in the USB memory as slideshow background music (BGM).

[Music Search]

Displays information on the audio CD

(CD-DA) based on Gracenote technology.

[Photo] only

[Slideshow]

Starts a slideshow.

[Slideshow Speed]

Changes the slideshow speed.

[Slideshow Effect]

Sets the effect when playing a slideshow.

[Slideshow BGM]

• [Off]: Turns off the function.

• [My Music from USB]: Sets the music files registered in [Add Slideshow BGM].

• [Play from Music CD]: Sets the tracks on

CD-DAs (music CDs).

[Change Display]

Switches between [Grid View] and [List

View].

[Rotate Left]

Rotates the photo counterclockwise by

90 degrees.

[Rotate Right]

Rotates the photo clockwise by 90 degrees.

[View Image]

Displays the selected picture.

45

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\060SOU.fm

masterpage: Left

Adjusting the delay between the picture and sound

(A/V SYNC)

When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound for each function separately.

The setting method differs depending on the function.

When other than the “BT” or

“TV” function is selected

1

Press OPTIONS.

The option menu appears on the TV screen.

2

Press V/v to select [A/V SYNC], then press .

3

Press B/b to adjust the delay, then press .

You can adjust from 0 ms to 300 ms in

25 ms increments.

When the “TV” function is selected

1

Press OPTIONS.

“AV.SYNC” appears in the top panel display.

2

Press

3

Press V/v to adjust the delay, then press .

You can adjust from 0 ms to 300 ms in

25 ms increments.

4

Press OPTIONS.

The option menu in the top panel display turns off.

Sound Adjustment

Selecting the Audio

Format, Multilingual

Tracks, or Channel

When the system is playing a BD/DVD

VIDEO recorded in multiple audio formats

(PCM, Dolby Digital, MPEG audio, or

DTS) or multilingual tracks, you can change the audio format or language.

With a CD, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers.

Press AUDIO repeatedly during playback to select the audio signal you want.

The audio information appears on the TV screen.

x BD/DVD VIDEO

Depending on the BD/DVD VIDEO, the option of language varies.

When 4 digits are displayed, they represent

a language code. See “Language Code

List” (page 82). When the same language is

displayed two or more times, the BD/DVD

VIDEO is recorded in multiple audio formats.

x DVD-VR

The types of sound tracks recorded on a disc are displayed.

Example:

• [ Stereo]

• [ Stereo (Audio1)]

• [ Stereo (Audio2)]

• [ Main]

• [ Sub]

• [ Main/Sub]

46

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\070TUN.fm

masterpage: Right

Note

[ Stereo (Audio1)] and [ Stereo (Audio2)] do not appear if only one audio stream is recorded on the disc.

x CD

• [ Stereo]: The standard stereo sound.

• [ 1/L]: The sound of the left channel

(monaural).

• [ 2/R]: The sound of the right channel

(monaural).

• [ L+R]: The sound of both the left and right channels output from each individual speaker.

Enjoying Multiplex

Broadcast Sound

(DUAL MONO)

You can enjoy multiplex broadcast sound when the system receives or plays a Dolby

Digital multiplex broadcast signal.

Note

To receive a Dolby Digital signal, you need to connect a TV or other equipment to the TV

(DIGITAL IN OPTICAL) jack with a optical

digital cord (pages 24, 25).

If your TV’s HDMI IN jack is compatible with

the Audio Return Channel function (pages 24,

64), you can receive a Dolby Digital signal via an

HDMI cable.

Press AUDIO repeatedly until the signal you want appears in the top panel display.

• “MAIN”: Sound of the main language will be output.

• “SUB”: Sound of the sub language will be output.

• “MN/SUB”: Mixed sound of both the main and sub languages will be output.

Tuner

Listening to the Radio

1

Press FUNCTION repeatedly until “FM” appears in the top panel display.

2

Select the radio station.

Automatic tuning

Hold down TUNING +/– until the auto scanning starts.

[Auto Tuning] appears on the TV screen. Scanning stops when the system tunes in a station.

To cancel automatic tuning, press any buttons.

Manual tuning

Press TUNING +/– repeatedly.

3

Press VOL +/– repeatedly to adjust the volume.

If an FM program is noisy

If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve.

1

Press OPTIONS.

The option menu appears on the TV screen.

2

Press V/v to select [FM Mode], then press .

3

Press V/v to select [Monaural], then press .

• [Stereo]: Stereo reception.

• [Monaural]: Monaural reception.

Tip

You can set [FM Mode] for each preset station separately.

47

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\070TUN.fm

masterpage: Left

To turn off the radio

Press "/1.

Presetting radio stations

You can preset up to 20 stations. Before tuning, make sure to turn down the volume to minimum.

1

Press FUNCTION repeatedly until “FM” appears in the top panel display.

2

Hold down TUNING +/– until the auto scanning starts.

Scanning stops when the system tunes in a station.

3

Press OPTIONS.

The option menu appears on the TV screen.

4

Press V/v to select [Preset

Memory], then press .

5

Press V/v to select the preset number you want, then press .

6

Repeat Steps 2 to 5 to store other stations.

To change a preset number

Select the preset number you want by pressing PRESET +/–, then perform the procedure from Step 3.

Selecting a preset station

1

Press FUNCTION repeatedly until “FM” appears in the top panel display.

The last received station is tuned in.

2

Press PRESET +/– repeatedly to select the preset station.

The preset number and frequency appear on the TV screen and top panel display.

Each time you press the button, the system tunes in one preset station.

Tip

• You can select the preset station number directly by pressing the number buttons.

• Each time you press DISPLAY, the display in the top panel display changes cyclically as follows:

Frequency t Preset number t Decoding status*

* Appears when [Sound Effect] is set to

[Dolby Pro Logic], [DTS Neo:6

Cinema], or [DTS Neo:6 Music]

(page 62).

48

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\080OTH.fm

masterpage: Right

Other Operations

Using the Control for

HDMI Function for

“BRAVIA” Sync

This function is available on TVs with the

“BRAVIA” Sync function.

By connecting Sony equipment that is compatible with the Control for HDMI function via an HDMI cable, operation is simplified.

Note

To use the “BRAVIA” Sync function, be sure to turn on the system and all connected equipment after completed the HDMI connection.

Control for HDMI - Easy

Setting

You can set the system’s [Control for

HDMI] function automatically by enabling the corresponding setting on the TV.

For details about the Control for HDMI

function, see “[HDMI Settings]” (page 64)

System Power Off

You can turn the system off in sync with the

TV.

Note

The system does not turn off automatically while playing music or when “FM” function is selected.

One-Touch Play

When you press N on the remote control, the system and TV turn on, and the TV’s input is switched to the HDMI input which the system is connected.

System Audio Control

You can enjoy the sound from TV or other equipment by a simple operation.

You can use the System Audio Control function as follows:

• When the system is turned on, the sound of the TV or other equipment can be output from the speakers of the system.

• When sound from the TV or other equipment is output via the speakers of the system, you can switch the sound to output from the TV speakers by pressing

SPEAKERS TV yAUDIO.

• When sound from the TV or other equipment is output via the speakers of the system, you can adjust the volume and turn off the sound of the system by operating the TV.

Audio Return Channel

You can enjoy TV sound via the system by using just one HDMI cable. For details of

the setting, see “[Audio Return Channel]”

(page 64).

Language Follow

When you change the language for the on-screen display of the TV, the system’s on-screen display language is also changed after turning off and on the system.

Routing Control

When you perform One-Touch Play on the connected equipment, the system turns on and sets the system’s function to “HDMI1” or “HDMI2” (depending on the HDMI input jack in use), and your TV’s input is automatically set to the HDMI input to which the system is connected.

49

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\080OTH.fm

masterpage: Left

Calibrating the

Appropriate Speaker

Settings Automatically

[Auto Calibration]

D.C.A.C. DX (Digital Cinema Auto

Calibration DX) brings you the ideal sound experience by automatically adjusting the setting of the speakers’ distance, location, and acoustic.

Note

• The system outputs a loud test sound when

[Auto Calibration] starts. You cannot turn the volume down. Give consideration to children and neighbors.

• Before [Auto Calibration], make sure that all the speakers are connected to the main unit and surround amplifier.

1

Press HOME.

The home menu appears on the TV screen.

2

Press B/b to select [Setup].

3

Press V/v to select [Audio

Settings], then press .

4

Press V/v to select [Auto

Calibration], then press .

The [Select speaker layout.] display appears.

5

Press V/v to select setting according to your speakers placement, then press .

• [Standard]: The surround speakers are installed in the rear position.

• [All Front]: All speakers are installed in the front position.

The confirmation display for [Auto

Calibration] appears.

6

Connect the calibration mic to the A.CAL MIC jack on the rear panel.

Set up the calibration mic at ear level using a tripod, etc. (not supplied). The calibration mic should aim the TV screen. The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic.

7

Press V/v to select [OK].

To cancel, select [Cancel].

8

Press .

[Auto Calibration] starts.

The system adjusts the speaker settings automatically.

Be quiet during the measurement.

Note

• Before [Auto Calibration], make sure that the surround amplifier is turned on and you have installed the surround amplifier in an appropriate location to ensure wireless connection with it.

• While [Auto Calibration] is in progress, do not operate the system.

9

Confirm the result of [Auto

Calibration].

The distance and level for each speaker appear on the TV screen.

Note

If measurement fails, follow the message then retry [Auto Calibration].

10

Press V/v to select [OK] or

[Cancel], then press .

x The measurement is OK.

Disconnect the calibration mic, then select [OK]. The result is implemented.

x The measurement is not OK.

Follow the message, then select [OK] to retry.

50

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\080OTH.fm

masterpage: Right

Tip

You can change the unit of measurement (feet or meters) by pressing the color button (RED).

8

Press B/b and to confirm the settings.

Check the following settings.

Setting the Speakers

[Speaker Settings]

To obtain optimum surround sound, set the speakers’ distance from your listening position. Then use the test tone to adjust the balance of the speakers.

1

Press HOME.

The home menu appears on the TV screen.

2

Press B/b to select [Setup].

3

Press V/v to select [Audio

Settings], then press .

4

Press V/v to select [Speaker

Settings], then press .

The [Select speaker layout.] display appears.

5

Press V/v to select setting according to your speakers placement, then press .

• [Standard]: The surround speakers are installed in the rear position.

• [All Front]: All speakers are installed in the front position.

Note

All settings are reset to default settings each time you change the speaker layout setting.

6

Press V/v to select the item, then press .

7

Press V/v to adjust the parameter.

x [Distance]

When you move the speakers, be sure to set the parameters of the distance from the listening position to the speakers.

You can set the parameters from 0 to

23 feet (0.0 to 7.0 meters).

[Front Left/Right] 10 ft/3.0 m: Set the front speaker distance.

[Center] 10 ft/3.0 m: Set the center speaker distance.

[Surround Left/Right] 10 ft/3.0 m: Set the surround speaker distance.

[Subwoofer] 10 ft/3.0 m: Set the subwoofer distance.

Tip

You can change the unit of measurement (feet or meters) by pressing the color button (RED).

x [Level]

You can adjust the sound level of the speakers. You can set the parameters from

–6.0 dB to +6.0 dB. Be sure to set [Test

Tone] to [On] for easy adjustment.

[Front Left/Right] 0.0 dB: Set the front speaker level.

[Center] 0.0 dB: Set the center speaker level.

[Surround Left/Right] 0.0 dB: Set the surround speaker level.

[Subwoofer] 0.0 dB: Set the subwoofer level.

51

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\080OTH.fm

masterpage: Left x [Relocation]

You can correct the speaker position virtually to improve the surround effect.

[On]: You can hear sound from a virtually relocated speaker position determined by

[Auto Calibration].

[Off]: You can hear sound from the actual speaker position.

Note

• This setting is only reflected after performing

[Auto Calibration].

• You cannot select this function when the speaker layout is set to [All Front].

8

Press V/v to select [Test Tone], then press .

9

Press V/v to select [Off], then press

.

Note

The test tone signals are not output from the

HDMI (OUT) jack.

Tip

To adjust the volume of all the speakers at one time, press VOL +/–.

x [Test Tone]

The speakers will emit a test tone to adjust

[Level].

[Off]: The test tone is not emitted from the speakers.

[On]: The test tone is emitted from each speaker in sequence while adjusting level.

When you select one of the [Speaker

Settings] items, the test tone is emitted from each speaker in sequence.

Adjust the sound level as follows.

1

Set [Test Tone] to [On].

2

Press V/v to select [Level], then press .

3

Press V/v to select the speaker type you want, then press .

4

Press B/b to select the left or right speaker, then press V/v to adjust the level.

5

Press .

6

Repeat Steps 3 to 5.

7

Press RETURN.

The system returns to the previous display.

Using the Sleep Timer

You can set the system to turn off at a preset time, so you can fall asleep listening to music. The time can be preset in intervals of 10 minutes.

Press SLEEP.

Each time you press SLEEP, the minutes display (the remaining time) in the top panel display changes by 10 minutes.

When you set the sleep timer, the remaining time appears every 5 minutes.

When the remaining time is less than

2 minutes, “SLEEP” flashes in the top panel display.

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly.

52

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\080OTH.fm

masterpage: Right

Deactivating the

Buttons on the Main

Unit

(Child Lock)

You can deactivate the buttons on the main unit (except for "/1) for preventing misoperation, such as child mischief.

Touch and hold x on the main unit for more than 5 seconds.

“LOCKED” appears in the top panel display.

The child lock function is activated and the buttons on the main unit are locked. (You can operate the system by using the remote control.)

To cancel, touch and hold x for more than

5 seconds until “UNLOCK” appears in the top panel display.

Note

If you operate the buttons on the main unit while the child lock function is on, “LOCKED” flashes in the top panel display.

Controlling Your TV or

Other Equipment with the Supplied Remote

Control

Note

When you replace the batteries of the remote control, the remote control setting may be reset to the default (SONY) setting.

ENTER

Color buttons

TOP MENU

(GUIDE)

POP UP/MENU

(LIST)

B/V/v/b,

RETURN

OPTIONS

NETFLIX

HOME (MENU)

SEN

FUNCTION

(PAGE –)

SOUND MODE

(PAGE +)

AUDIO

SUBTITLE (CC)

DISPLAY

Controlling your equipment with the supplied remote control

1

Press TV or STB that matches the equipment you want to control.

2

Press the appropriated buttons listed in the following table.

• z: The button can be used with the default setting of the remote control.

• a: The button can be used when you change the preset code of the remote control.

Button

AV "/1

Number buttons

Remote’s mode

TV STB z z z z z z z z z z a z a z z z z z z z z z z z a z z z z z a a

53

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\080OTH.fm

masterpage: Left

Button m/M

./>

N PLAY

X PAUSE x STOP

MUTING

VOL +/–

CH +/–

SLEEP (INPUT) z z z z

Remote’s mode

TV z

STB z z z a z z z z z z z z z

Note

• In TV or STB mode, if you press any of the buttons above, the TV or STB button lights up.

(However, depending on the code setting, some buttons may not work, and the TV or STB button may not light up.)

• Depending on the TV or equipment you may not be able to use some of the buttons.

5

Press V/v to select the equipment type that you want to operate with the supplied remote control, then press .

6

Press V/v to select the device’s manufacturer, then press .

7

Press POP UP/MENU while pressing TV (for a TV) or STB (for a cable box, digital satellite receiver, digital video recorder, etc.).

8

When the TV or STB button starts flashing, enter the code on the TV screen using the number buttons, then press ENTER.

If you successfully set the code, the TV or STB button will flash twice slowly.

If the setting is unsuccessful, the TV or

STB button will flash five times quickly.

Note

• You can exit Preset mode by pressing the TV or

STB button (whichever button is flashing).

• If you do not operate the remote control for more than 10 seconds during presetting mode, the remote control exits from presetting mode.

Changing the preset code of the remote control (Preset mode)

You can control non-Sony equipment by changing the preset code of the remote control.

1

Press HOME.

The home menu appears on the TV screen.

2

Press B/b to select [Setup].

3

Press V/v to select [Remote

Control Setting Guide], then press .

4

Press V/v to select [Preset

Mode], then press .

Resetting the remote control

1

While holding down AV ?/1, hold down VOL –, then press CH –.

The BD, TV, and STB buttons light up.

2

Release all buttons.

The BD, TV, and STB buttons turn off and the preset code is cleared. The remote control returns to its default settings.

54

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\080OTH.fm

masterpage: Right

Saving Power in

Standby Mode

Check that you have made the following settings:

– [Control for HDMI] in [HDMI Settings]

is set to [Off] (page 64).

– [Quick Start Mode] is set to [Off]

(page 64).

– [Remote Start] in [Network Settings] is

set to [Off] (page 66).

Browsing Websites

1

Prepare for Internet browsing.

Connect the system to a network

(page 27).

2

Press HOME.

The home menu appears on the TV screen.

3

Press B/b to select

[Network].

4

Press V/v to select [Internet

Browser], then press .

The [Internet Browser] display appears.

Note

Some websites may not display correctly, or not function.

To enter a URL

Select [URL entry] from the options menu.

Enter the URL using the software keyboard, then select [Enter].

To set the default start page

While the page you want to set is displayed, select [Set as start page] from the options menu.

To return to the previous page

Select [Previous page] from the options menu.

When the previous page does not appear even if you select [Previous page], select

[Window List] from the options menu and select the page you want to return to from the list.

To quit Internet Browser

Press HOME.

Internet Browser display

You can check website information by pressing DISPLAY. The display information differs depending on the website and page status.

A Page title

B Page address

C Cursor

Move by pressing B/V/v/b. Place the cursor on the link you want to view, then press . The linked website is displayed.

55

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\080OTH.fm

masterpage: Left

D SSL icon

Appears when the linked URL is secured.

E Signal strength indicator

Appears when the system is connected to a wireless network.

F Progress bar/Loading icon

Appears when the page is being read, or during file download/transfer.

G Text input field

Press , then choose [Input] from the options menu to open the software keyboard.

H Scroll bar

Press B/V/v/b to move the page display left, up, down, or right.

Available options

Various settings and operations are available by pressing OPTIONS.

The available items differ depending on the situation.

[Browser Setup]

Displays the Internet Browser settings.

• [Zoom]: Increases or decreases the size of the displayed contents.

• [JavaScript Setup]: Sets whether to enable or disable JavaScript.

• [Cookie Setup]: Sets whether or not to accept browser cookies.

• [SSL Alarm Display]: Sets whether to enable or disable SSL.

[Window List]

Displays a list of all current opened websites.

Allows you to return to a previous displayed website by selecting the window.

[Bookmark List]

Displays the bookmark list.

[URL entry]

Allows you to enter a URL when the software keyboard is displayed.

[Previous page]

Moves to a previous displayed page.

[Next page]

Moves to the previous displayed next page.

[Cancel loading]

Stops loading a page.

[Reload]

Reloads the same page.

[Add to Bookmark]

Adds the current displayed website to the bookmark list.

[Set as start page]

Sets the current displayed website as the default start page.

[Open in new window]

Opens a link in a new window.

[Character encoding]

Sets the character encoding system.

[Display certificate]

Displays server certificates sent from pages that support SSL.

[Input]

Displays the software keyboard to enter characters while browsing a website.

[Break]

Moves the cursor to the next line in the text input field.

[Delete]

Erases one character on the left side of the cursor during text input.

56

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\080OTH.fm

masterpage: Right

Further Settings for the

Wireless System

Activating wireless transmission between specific units

[Secure Link]

You can specify the wireless connection to link the main unit to the surround amplifier using the Secure Link function.

This function can help prevent interference if you use multiple wireless products or your neighbors use wireless products.

1

Press HOME.

The home menu appears on the TV screen.

2

Press B/b to select [Setup].

3

Press V/v to select [System

Settings], then press .

4

Press V/v to select [Wireless

Sound Connection], then press

.

The [Wireless Sound Connection] display appears.

5

Press V/v to select [Secure

Link], then press .

6

Press V/v to select [On], then press .

7

Press SECURE LINK on the rear of the surround amplifier.

Proceed to the next Step within a few minutes.

8

Press B/b to select [Start], then press .

To return to the previous display, select [Cancel].

9

After the message [Secure Link setting is complete.] appears, press .

The surround amplifier is linked to the main unit and the LINK/STANDBY indicator turns orange.

If the message [Cannot set Secure

Link.] appears, follow the on-screen messages.

To cancel the Secure Link function

For the main unit

Select [Off] on Step 6 above.

For the surround amplifier

Hold down SECURE LINK on the rear of the surround amplifier until the LINK/

STANDBY indicator turns green or flashes green.

57

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\090SET.fm

masterpage: Left

If wireless transmission is unstable

[RF Channel]

If you use multiple wireless systems, such as a wireless LAN (Local Area Network) or

Bluetooth, the wireless signals may be unstable. In this case, the transmission may be improved by changing the following

[RF Channel] setting.

1

Press HOME.

The home menu appears on the TV screen.

2

Press B/b to select [Setup].

3

Press V/v to select [System

Settings], then press .

4

Press V/v to select [Wireless

Sound Connection], then press

.

The [Wireless Sound Connection] display appears.

5

Press V/v to select [RF Channel], then press .

6

Press V/v to select the setting you want, then press .

• [Auto]: Normally select this. The system automatically selects the better channel for transmission.

• [1], [2], [3]: The system transmits sound by fixing the channel for transmitting. Select the channel with the better transmission.

Note

The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s).

Settings and Adjustments

Using the Setup Display

You can make various adjustments to items such as picture and sound.

The default settings are underlined.

Note

Playback settings stored in the disc take priority over the Setup Display settings. Therefore, some of the functions may not be performed.

1

Press HOME.

The home menu appears on the TV screen.

2

Press B/b to select [Setup].

3

Press V/v to select the setup category icon, then press .

Icon Explanation

[Remote Control Setting

Guide] (page 59)

Makes the remote control settings for operating the

TV or other equipment.

[Network Update]

(page 59)

Updates the software of the system.

[Screen Settings]

(page 59)

Makes the screen settings according to the type of TV.

[Audio Settings]

(page 61)

Makes the audio settings according to the type of connecting jacks.

[BD/DVD Viewing

Settings] (page 63)

Makes detailed settings for

BD/DVD playback.

58

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\090SET.fm

masterpage: Right

Icon Explanation

[Parental Control

Settings] (page 63)

Makes detailed settings for the Parental Control function.

[Music Settings]

(page 64)

Makes detailed settings for

Super Audio CD playback.

[System Settings]

(page 64)

Makes the system-related settings.

[External Input Settings]

(page 65)

Sets the input skip setting for each external input.

[Network Settings]

(page 65)

Makes detailed settings for

Internet and network.

[Easy Network Settings]

(page 66)

Runs [Easy Network

Settings] to make the basic network settings.

[Resetting] (page 66)

Resets the system to the factory settings.

[Remote Control

Setting Guide]

[Network Update]

By updating your software to the latest version, you can take advantage of the newest functions.

For information about update functions, refer to the following website: http://www.sony.com/blurayhtsupport/

During a software update, “UPDATE” appears in the top panel display. After the update completes, the main unit automatically turns off.

While the updating operation is in progress, do not turn on or off the main unit, or operate the main unit or TV. Wait for the software update to complete.

[Screen Settings] x [Preset Mode]

You can change the preset code of the remote control for controlling non-Sony

equipment. For details, see “Changing the preset code of the remote control (Preset mode)” (page 54).

x [3D Output Setting]

[Auto]: Normally select this.

[Off]: Select this to display all contents in

2D.

Note

3D video from the HDMI (IN 1) or HDMI (IN 2) jack is output regardless of this setting.

x [TV Screen Size Setting for 3D]

Sets the screen size of your 3D-compatible

TV.

Note

This setting does not work for 3D video from the

HDMI (IN 1) or HDMI (IN 2) jack.

59

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\090SET.fm

masterpage: Left x [TV Type]

[16:9]: Select this when connecting to a wide-screen TV or a TV with a wide-mode function.

[4:3]: Select this when connecting to a 4:3 screen TV without a wide-mode function.

x [Screen Format]

[Full]: Select this when connecting to a TV with a wide-mode function. Displays a 4:3 screen picture in 16:9 aspect ratio even on a wide-screen TV.

[Normal]: Changes the picture size to fit the screen size with the original picture aspect ratio.

x [Output Video Resolution]

[Auto]: Outputs video signal according to the resolution of the TV or connected equipment.

[Original Resolution]: Outputs video signal according to the resolution recorded on the disc. (When the resolution is lower than SD resolution, it is scaled up to SD resolution.)

[480i/576i]*, [480p/576p]*, [720p],

[1080i], [1080p]: Outputs video signal according to the selected resolution setting.

* If the color system of your disc is NTSC, the video signals resolution can be converted to

[480i] and [480p] only.

x [DVD Aspect Ratio]

[Letter Box]: Displays a wide picture with black bands on the top and bottom.

x [BD-ROM 24p Output]

[Auto]: Outputs 24p video signals only when you connect a 1080/24p-compatible

TV via an HDMI connection and the

[Output Video Resolution] is set to [Auto] or [1080p].

[On]: Select this when your TV is compatible with 1080/24p video signals.

[Off]: Select this when your TV is not compatible with 1080/24p video signals.

[Pan & Scan]: Displays a full-height picture on the entire screen, with trimmed sides.

x [DVD-ROM 24p Output]

[Auto]: Outputs 24p video signals only when you connect a 1080/24p-compatible

TV via an HDMI connection and the

[Output Video Resolution] is set to [Auto] or [1080p].

[Off]: Select this when your TV is not compatible with 1080/24p video signals.

x [Cinema Conversion Mode]

[Auto]: Normally select this. The main unit automatically detects whether the material is video-based or film-based, and switches to the appropriate conversion method.

[Video]: The conversion method suited for video-based material will always be selected regardless of the material.

60

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\090SET.fm

masterpage: Right x [4K Output]

[Auto1]: Outputs 2K (1920 × 1080) video signals during video playback and 4K video signals during photo play when connecting to a Sony 4K-compatible equipment.

Outputs 4K video signals during playback of 24p video contents in BD/DVD ROMs or photo play when connecting to a non-

Sony 4K-compatible equipment.

This setting does not work for 3D video image playback.

[Auto2]: Automatically outputs 4K/24p video signals when you connect a 4K/24p compatible equipment and make the appropriate settings in [BD-ROM 24p

Output] or [DVD-ROM 24p Output], and also outputs 4K/24p photo images when you play 2D photo files.

[Off]: Turns off the function.

Note

If your Sony equipment is not detected when

[Auto1] is selected, the setting will have the same effect as [Auto2] setting.

x [YCbCr/RGB (HDMI)]

[Auto]: Automatically detects the type of external equipment, and switches to the matching color setting.

[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video signals.

[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video signals.

[RGB]: Select this when connecting to an equipment with an HDCP compliant DVI jack.

x [HDMI Deep Color Output]

[Auto]: Normally select this.

[16bit], [12bit], [10bit]: Outputs 16bit/

12bit/10bit video signals when the connected TV is compatible with Deep

Color.

[Off]: Select this when the picture is unstable or colors appear unnatural.

x [SBM] (Super Bit Mapping)

[On]: Smooths the gradation of video signals output from the HDMI (OUT) jack.

[Off]: Select this when outputting distorted video signals or unnatural color.

x [Pause Mode] (BD/DVD VIDEO/

DVD-R/DVD-RW only)

[Auto]: The picture, including subjects that move dynamically, is output with no jitter.

Normally select this position.

[Frame]: The picture, including subjects that do not move dynamically, is output in high resolution.

[Audio Settings] x [BD Audio MIX Setting]

[On]: Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio.

[Off]: Outputs the primary audio only.

x [Audio DRC]

You can compress the dynamic range of the sound track.

[Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only).

[On]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended.

[Off]: No compression of dynamic range.

61

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\090SET.fm

masterpage: Left x [Attenuate - AUDIO]

Distortion may occur when you listen to an equipment connected to the AUDIO

(AUDIO IN L/R) jacks. You can prevent distortion by attenuating the input level on the main unit.

[On]: Attenuates the input level. The output level will decrease at this setting.

[Off]: Normal input level.

x [Audio Output]

You can select the output method where the audio signal is output.

[Speaker]: Outputs multi-channel sound from the system’s speakers only.

[Speaker + HDMI]: Outputs multi-channel sound from the system’s speakers and

2-channel linear PCM signals from the

HDMI (OUT) jack.

[HDMI]: Outputs sound from the HDMI

(OUT) jack only. Sound format depends on the connected equipment.

Note

• When [Control for HDMI] is set to [On]

(page 64), [Audio Output] is set to [Speaker +

HDMI] automatically and this setting cannot be changed.

• When [Audio Output] is set to [HDMI], the output signal format for the “TV” function is

2-channel linear PCM.

[Dolby Pro Logic]: The system simulates surround sound from 2-channel sources and outputs sound from all speakers

(5.1 channel) (Dolby Pro Logic decoding).

[DTS Neo:6 Cinema]/[DTS Neo:6 Music]:

The system simulates surround sound from

2-channel sources and produces multichannel sound (DTS Neo:6 Cinema/DTS

Neo:6 Music mode decoding).

[2ch Stereo]: This system outputs the sound from the front left/right speakers and subwoofer only. Multi-channel surround formats are downmixed to 2-channel.

[Off]: The sound effects are disabled. You can hear sound as it is recorded.

x [Speaker Settings]

To obtain optimum surround sound, set the

speakers. For details, see “Setting the

Speakers” (page 51).

x [Auto Calibration]

You can calibrate the appropriate settings

automatically. For details, see “Calibrating the Appropriate Speaker Settings

Automatically” (page 50).

x [Sound Effect]

You can turn on or off the system’s sound

effects (SOUND MODE setting (page 33)).

For a 2-channel source, you can select

[Dolby Pro Logic], [DTS Neo:6 Cinema], or [DTS Neo:6 Music] to simulate surround sound.

[Sound Mode On]: Enables the surround

effect of the sound mode (page 33) and

Football mode (page 34).

x [Bluetooth AUDIO - AAC]

You can enable and disable AAC audio.

[On]: AAC audio if the Bluetooth device supports AAC.

[Off]: SBC audio.

Note

You can enjoy high quality sound if the AAC is enabled. In case you cannot listen to AAC sound from your device, select [Off].

62

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\090SET.fm

masterpage: Right

[BD/DVD Viewing

Settings]

[Parental Control

Settings] x [BD/DVD Menu Language]

You can select the default menu language for BD-ROMs or DVD VIDEOs.

When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language

by referring to “Language Code List”

(page 82).

x [Password]

Set or change the password for the Parental

Control function. A password allows you to set a restriction on BD-ROM, DVD

VIDEO, or Internet video playback. If necessary, you can differentiate the restriction levels for BD-ROMs and DVD

VIDEOs.

x [Audio Language]

You can select the default track language for BD-ROMs or DVD VIDEOs.

When you select [Original], the language given priority in the disc is selected.

When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language

by referring to “Language Code List”

(page 82).

x [Subtitle Language]

You can select the default subtitle language for BD-ROMs or DVD VIDEOs.

When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language

by referring to “Language Code List”

(page 82).

x [BD Hybrid Disc Playback Layer]

[BD]: Plays BD layer.

[DVD/CD]: Plays DVD or CD layer.

x [Parental Control Area Code]

Playback of some BD-ROMs or DVD

VIDEOs can be limited according to the geographic area. Scenes may be blocked or replaced with different scenes. Follow the on-screen instructions and enter your fourdigit password.

x [BD Parental Control]/[DVD

Parental Control]/[Internet Video

Parental Control]

By setting Parental Control, scenes can be blocked or replaced with different scenes.

Follow the on-screen instructions and enter your four-digit password.

x [Internet Video Unrated]

[Allow]: Allows the playback of unrated

Internet videos.

[Block]: Blocks the playback of unrated

Internet videos.

x [BD Internet Connection]

[Allow]: Normally select this.

[Do not allow]: Prohibits Internet connection.

63

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\090SET.fm

masterpage: Left

[Music Settings]

Note

When [Auto] is selected, only N button lights up during playback.

x [Super Audio CD Playback Layer]

[Super Audio CD]: Plays the Super Audio

CD layer.

[CD]: Plays the CD layer.

x [Super Audio CD Playback

Channel]

[DSD 2ch]: Plays the 2-channel area.

[DSD Multi]: Plays the multi-channel area.

[System Settings] x [HDMI Settings]

[Control for HDMI]

[On]: Turns on the [Control for HDMI] function. You can operate mutually between equipment that are connected with an HDMI cable.

[Off]: Off.

[Audio Return Channel]

This function is available when you connect the system to a TV’s HDMI IN jack that is compatible with the Audio

Return Channel function and [Control for

HDMI] is set to [On].

[Auto]: The system can receive the digital audio signal of the TV automatically via an

HDMI cable.

[Off]: Off.

x [OSD Language]

You can select the language you want for the system on-screen display.

x [Wireless Sound Connection]

You can make further settings for the

wireless system. For details, see “Further

Settings for the Wireless System”

(page 57).

You can also check the wireless transmission status. When wireless transmission is activated, [OK] appears to the right of [Status].

x [Quick Start Mode]

[On]: Shortens the startup time from standby mode. You can operate the system quickly after turning it on.

[Off]: The default setting.

x [Power Save Drive]

[On]: Reduces power consumption when volume level is low.

[Off]: Normal status. The system can output sound volume.

x [Main Unit illumination]

[On]: The top panel display always is turned on, soft-touch buttons indicator are always lit and the brightness of the LED indicator is the maximum.

[Auto]: The top panel display and softtouch buttons indicator are turned off and the brightness of LED indicator is reduced automatically if you do not operate the system for about 10 seconds.

x [Auto Display]

[On]: Automatically displays information on the screen when changing the viewing titles, picture modes, audio signals, etc.

[Off]: Displays information only when you press DISPLAY.

64

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\090SET.fm

masterpage: Right x [Screen Saver]

[On]: Turns on the screen saver function.

[Off]: Off.

x [Software Update Notification]

[On]: Sets the system to inform you of latest software version information

(page 59).

[Off]: Off.

[External Input

Settings]

The skip setting is a convenient feature that allows you to skip unused inputs when selecting a function.

x [Gracenote Settings]

[Auto]: Automatically downloads disc information when you stop playback of the disc. To download, the system must be connected to the network.

[Manual]: Downloads disc information when [Video Search] or [Music Search] is selected.

x [HDMI1]/[HDMI2]/[TV]/[Bluetooth

AUDIO]/[AUDIO]

[Do not skip]: The system does not skip the selected function when selecting the function by pressing FUNCTION.

[Skip]: The system skips the selected function when selecting the function by pressing FUNCTION.

[Network Settings] x [System Information]

You can display the system’s software version information and the MAC address.

x [Software License Information]

You can display the Software License

Information.

x [Internet Settings]

Connect the system to the network

beforehand. For details, see “Step 3:

Preparing for Network Connection”

(page 27).

[Wired Setup]: Select this when you connect to a broadband router using a LAN cable.

[Wireless Setup(built-in)]: Select this when you use the built-in wireless LAN of the system for wireless network connection.

Tip

For further details, visit the following website and check the FAQ: http://www.sony.com/blurayhtsupport/ x [Network Connection Status]

Displays the current network connection status.

65

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\090SET.fm

masterpage: Left x [Network Connection

Diagnostics]

You can run the network diagnostic to check if the network connection has been made properly.

x [Remote Start]

[On]: Allows turn on the system by a device linked via network when the system is in standby mode.

[Off]: The system cannot be turned on by a device linked via network.

x [Connection Server Settings]

Sets whether or not to display the connected DLNA server.

x [Renderer Options]

[Auto Access Permission]: Sets whether or not to allow automatic access from a newly detected DLNA controller.

[Smart Select]: Allows a Sony DLNA controller to find the system as the target equipment to operate by using the infrared ray. You can set this function to on or off.

[Renderer Name]: Displays the system’s name as it is listed on other DLNA devices on the network.

[Easy Network

Settings]

Runs [Easy Network Settings] to make the basic network settings. Follow the onscreen instructions.

[Resetting] x [Renderer Access Control]

Sets whether or not to accept commands from DLNA controllers.

x [Reset to Factory Default Settings]

You can reset the system settings to the factory default by selecting the group of settings. All the settings within the group will be reset.

x [PARTY Auto Start]

[On]: Starts a PARTY or joins an existing

PARTY at the request of a networked device compatible with the PARTY

STREAMING function.

[Off]: Off.

x [Initialize Personal Information]

You can erase your personal information stored in the system.

x [Registered Remote Devices]

Displays a list of your registered remote devices.

66

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Right

Additional Information

Precautions

On safety

• Should any solid object or liquid fall into the cabinet, unplug the system and have it checked by qualified personnel before operating it any further.

• Do not touch the AC power cord (mains lead) with wet hands. Doing so may cause an electric shock.

On power sources

If you are not going to use the system for a long time, be sure to disconnect the system from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.

On placement

• Place the system in a location with adequate ventilation to prevent heat build-up in the system.

• Although the system heats up during operation, this is not a malfunction. If you continuously use this system at a large volume, the cabinet temperature of the top, side and bottom rises considerably.

To avoid burning yourself, do not touch the cabinet.

• Do not place the system on a soft surface

(rugs, blankets, etc.) that might block the ventilation holes.

• Do not install the system near heat sources such as radiators, air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock.

• Do not install the system in an inclined position. It is designed to be operated in a horizontal position only.

• Keep the system and discs away from components with strong magnets, such as microwave ovens, or large loudspeakers.

• Do not place heavy objects on the system.

• Do not place metal objects in front of the front panel. It may limit reception of radio waves.

• Do not place the system in a place where medical equipment is in use. It may cause a malfunction of medical equipment.

• If you use a pacemaker or other medical device, consult your physician or the manufacturer of your medical device before using the wireless LAN function.

On operation

If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the main unit. Should this occur, the system may not operate properly.

In this case, remove the disc and leave the system turned on for about half an hour until the moisture evaporates.

On adjusting volume

Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is suddenly played.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

On cleaning discs, disc/lens cleaners

Do not use cleaning discs or disc/lens cleaners (including wet or spray types).

These may cause the apparatus to malfunction.

67

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Left

On replacement of parts

In the events that this system is repaired, repaired parts may be retained for reuse or recycling purposes.

On your TV’s color

If the speakers cause the color irregularity on your TV screen, turn off the TV then turn it on after 15 to 30 minutes. If color irregularity persist, place the speakers further away from the TV set.

IMPORTANT NOTICE

Caution: This system is capable of holding a still video image or on-screen display image on your TV screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time, you risk permanent damage to your TV screen. Plasma display panel televisions and projection televisions are especially susceptible to this.

On moving the system

Before moving the system, make sure that there is no disc inserted, and disconnect the

AC power cord (mains lead) from the wall outlet (mains).

On Bluetooth communication

Bluetooth devices should be used within approximately 10 meters (33 feet)

(unobstructed distance) of each other.

The effective communication range may become shorter under the following conditions.

– When a person, metal object, wall or other obstruction is between the devices with a Bluetooth connection

– Locations where a wireless LAN is installed

– Around microwave ovens that are in use

– Locations where other electromagnetic waves occur

Bluetooth devices and wireless LAN

(IEEE 802.11b/g) use the same frequency band (2.4 GHz). When using your

Bluetooth device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies:

– Use this main unit at least 10 meters

(33 feet) away from the wireless LAN device.

– Turn off the power to the wireless LAN equipment when using your Bluetooth device within 10 meters (33 feet).

– Install this main unit and Bluetooth device as closer to each other as possible.

• The radio waves broadcast by this main unit may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this main unit and Bluetooth device in the following locations:

– In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gasses may be present

– Near automatic doors or fire alarms

68

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Right

• This main unit supports security functions that comply with the Bluetooth specification to ensure secure connection during communication using Bluetooth technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using Bluetooth technology.

• Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using Bluetooth technology.

Bluetooth communication is not necessarily guaranteed with all Bluetooth devices that have the same profile as this main unit.

Bluetooth devices connected with this main unit must comply with the

Bluetooth specification prescribed by the

Bluetooth SIG, Inc., and must be certified to comply. However, even when a device complies with the Bluetooth specification, there may be cases where the characteristics or specifications of the

Bluetooth device make it impossible to connect, or may result in different control methods, display or operation.

• Noise may occur or the audio may cut off depending on the Bluetooth device connected with this main unit, the communications environment, or surrounding conditions.

If you have any questions or problems concerning your system, please consult your nearest Sony dealer.

Notes about Discs

On handling discs

• To keep the disc clean, handle the disc by its edge. Do not touch the surface.

• Do not stick paper or tape on the disc.

• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.

• After playing, store the disc in its case.

On cleaning

• Before playing, clean the disc with a cleaning cloth.

Wipe the disc from the center out.

• Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl

LPs.

This system can only play a standard circular disc. Using neither standard nor circular discs (e.g., card, heart, or star shape) may cause a malfunction.

Do not use a disc that has a commercially available accessory attached, such as a label or ring.

69

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Left

Troubleshooting

If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest

Sony dealer.

In the event of a problem with the wireless sound function, have a Sony dealer check the entire system (main unit and surround amplifier).

General

The power does not turn on.

t Check that the AC power cord (mains lead) is connected securely.

The remote control does not function.

t The distance between the remote control and the main unit is too far.

t The batteries in the remote control are weak.

The disc lid does not open and you cannot remove the disc even after you

press Z.

t Try the following:

1 Touch and hold N and Z on the main unit for more than 5 seconds to open the disc lid.

2 Remove the disc.

3 Disconnect the AC power cord

(mains lead) from the wall outlet

(mains), then reconnect after several minutes.

The system does not work normally.

t Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes.

Messages

[A new software version is available.

Please go to the “Setup” section of the menu and select “Network

Update” to perform the update.] appears on the TV screen.

t See [Network Update] (page 59) to

update the system to a latest software version.

“PRTECT”, “PUSH” and “POWER” appear alternately in the top panel display.

t Press "/1 to turn off the system, and check the following items after

“STBY” disappears.

• Are the + and – speaker cords shortcircuited?

• Are you using only the supplied speakers?

• Is anything blocking the ventilation holes of the system?

• After checking the above items and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer.

“LOCKED” appears in the top panel display.

t Set the child lock function to off

(page 53).

“D. LOCK” appears in the top panel display.

t Contact your nearest Sony dealer or local authorized Sony service facility.

“Exxxx” (x is a number) appears in the top panel display.

t Contact your nearest Sony dealer or local authorized Sony service facility and give the error code.

70

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Right

appears without any messages on the entire TV screen.

t Contact your nearest Sony dealer or local authorized Sony service facility.

“NOT.USE” appears in the top panel display when you press SOUND

MODE, FOOTBALL or MUSIC EQ.

t The setting for SOUND MODE,

FOOTBALL and MUSIC EQ cannot be changed when the [Sound Effect] is set to other than [Sound Mode On]. Set

[Sound Effect] in [Audio Settings] to

[Sound Mode On] (page 62).

Picture

There is no picture or the picture is not output correctly.

t Check the output method on your

system (page 24).

t Touch and hold N and VOL – on the main unit for more than 5 seconds to reset the video output resolution to the lowest resolution.

t For BD-ROMs, check the [BD-ROM

24p Output] settings in [Screen

Settings] (page 60).

There is no picture when you make an

HDMI cable connection.

t The main unit is connected to an input device that is not HDCP (Highbandwidth Digital Content Protection) compliant (“HDMI” in the top panel

does not light up) (page 24).

3D images from the HDMI (IN 1) or

HDMI (IN 2) jack do not appear on the

TV screen.

t Depending on the TV or video equipment, 3D images may not appear.

The dark area of the picture is too dark/the bright area is too bright or unnatural.

t Set [Picture Quality Mode] to [Auto]

(default) (page 44).

Picture noise appears.

t Clean the disc.

t If the picture output from your system goes through your VCR to get to your

TV, the copy-protection signal applied to some BD/DVD programs could affect picture quality. If you still experience problems even when you connect your main unit directly to your

TV, try connecting your main unit to the other input jacks.

An image is not displayed on the entire TV screen.

t Check the setting of [TV Type] in

[Screen Settings] (page 60).

t The aspect ratio on the disc is fixed.

Color irregularity occurs on the TV screen.

t If the speakers are used with a CRTbased TV or projector, install the speakers at least 0.3 meters (1 foot) from the TV set.

t If the color irregularity persists, turn off the TV set once, then turn it on after

15 to 30 minutes.

t Make sure that no magnetic object

(magnetic latch on a TV stand, health care device, toy, etc.) is placed near the speakers.

Sound

There is no sound.

t The speaker cords are not connected securely.

t Check the speaker settings (page 51).

71

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Left

The Super Audio CD sound of an equipment that is connected to the

HDMI (IN 1) or HDMI (IN 2) jack is not output.

t HDMI (IN 1) and HDMI (IN 2) does not accept an audio format that contains copy protection. Connect the analog audio output of the equipment to the AUDIO (AUDIO IN L/R) jacks of the main unit.

There is no sound from the TV via the

HDMI (OUT) jack when using the

Audio Return Channel function.

t Set [Control for HDMI] in [HDMI

Settings] of [System Settings] to [On]

(page 64). Also, set [Audio Return

Channel] in [HDMI Settings] of

[System Settings] to [Auto] (page 64).

t Make sure that your TV is compatible with the Audio Return Channel function.

t Make sure that an HDMI cable is connected to a jack on your TV that is compatible with the Audio Return

Channel function.

The system does not output sound of

TV programs correctly when connected to a set-top box.

t Set [Audio Return Channel] in [HDMI

Settings] of [System Settings] to [Off]

(page 64).

t Check the connections (page 25).

Severe hum or noise is heard.

t Move your audio equipment away from the TV.

t Clean the disc.

The sound loses stereo effect when you play a CD.

t Select stereo sound by pressing

AUDIO (page 46).

The sound outputs from the center speaker only.

t Depending on the disc, the sound may output from the center speaker only.

No sound or only a very low-level sound is heard from the surround speakers.

t Check the speaker connections and

settings (pages 22, 51).

t Check the sound mode setting

(page 33).

t Depending on the source, the effect of the surround speakers may be less noticeable.

t Set [Sound Mode] to [Auto] (page 33).

Distortion occurs in the sound of a connected equipment.

t Reduce the input level for the connected equipment by setting

[Attenuate - AUDIO] (page 62).

A sudden loud music is heard.

t The build-in sound demonstration is activated. Press VOL – to reduce the volume or press x to stop the demonstration.

Wireless sound

Wireless transmission is not activated or there is no sound from the surround speakers.

t Check the status of the LINK/

STANDBY indicator on the surround amplifier.

72

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Right

• Turns off.

– Check that the AC power cord

(mains lead) of the surround amplifier is connected securely.

– Turn the surround amplifier on by pressing "/1 on the surround amplifier.

• Flashes green quickly.

– 1 Press "/1 on the surround amplifier.

2 Insert the wireless transceiver into the surround amplifier correctly.

3 Press "/1 on the surround amplifier.

• Flashes red.

– Press "/1 to turn off the surround amplifier, and check the following items.

1 Are the + and – speaker cords short-circuited?

2 Is anything blocking the ventilation holes of the surround amplifier?

After checking the above items and fixing any problems, turn on the surround amplifier. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer.

• Flashes green or orange slowly or turns red.

– Make sure that the wireless transceiver is inserted correctly into the main unit.

– Make the [Secure Link] setting

again (page 57).

– Sound transmission is poor. Move the surround amplifier so that the

LINK/STANDBY indicator turns green or orange.

– Move the system away from other wireless devices.

– Avoid using any other wireless devices.

• Turns green or orange.

– Check the speaker connections and settings.

Noise is heard from surround speakers or sound from the surround speakers skips.

t Wireless transmission is unstable.

Change the [RF Channel] setting in

[Wireless Sound Connection]

(page 58).

t Install the main unit and surround amplifier closer to each other.

t Do not install the main unit and surround amplifier in a closed rack, on a metal rack, or under a table.

Tuner

Radio stations cannot be tuned in.

t Check that the antenna (aerial) is connected securely. Adjust the antenna

(aerial) or connect an external antenna

(aerial) if necessary.

t The signal strength of the stations is too weak (when tuning in with automatic tuning). Use manual tuning.

Playback

The disc does not play.

t The region code on the BD/DVD does not match the system.

t Moisture has condensed inside the main unit and may cause damage to the lenses. Remove the disc and leave the main unit turned on for about half an hour.

t The system cannot play a recorded disc that is not correctly finalized

(page 76).

73

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Left

File names are not displayed correctly.

t The system can only display ISO

8859-1 compliant character formats.

Other character formats may be displayed differently.

t Depending on the writing software used, the input characters may be displayed differently.

A disc does not start playing from the beginning.

t Resume play has been selected. Press

OPTIONS and select [Play from beginning], then press .

Playback does not start from the resume point where you last stopped playing.

t The resume point may be cleared from memory depending on the disc when

• you open the disc lid.

• you disconnect the USB device.

• you play other content.

• you turn off the main unit.

The language for the soundtrack/ subtitle or angles cannot be changed.

t Try using the BD’s or DVD’s menu.

t Multi-lingual tracks/subtitles or multiangles are not recorded on the BD or

DVD being played.

Bonus contents or other data that are contained in a BD-ROM cannot be played.

t Try the following:

1 Remove the disc.

2 Turn the system off.

3 Remove and reconnect the USB

device (page 36).

4 Turn the system on.

5 Insert the BD-ROM with

BONUSVIEW/BD-LIVE.

USB device

The USB device is not recognized.

t Try the following:

1 Turn the system off.

2 Remove and reconnect the USB device.

3 Turn the system on.

t Make sure that the USB device is securely connected to the (USB) port.

t Check if the USB device or a cable is damaged.

t Check if the USB device is on.

t If the USB device is connected via a

USB hub, disconnect it and connect the USB device directly to the main unit.

BRAVIA Internet Video

The picture/sound is poor/certain programs display with a loss of detail, especially during fast-motion or dark scenes.

t Picture/sound quality may be poor depending on Internet content providers.

t Picture/sound quality may be improved by changing the connection speed. Sony recommends a connection speed of at least 2.5 Mbps for standarddefinition video and 10 Mbps for highdefinition video.

t Not all videos contain sound.

The picture is small.

t Press V to zoom in.

74

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Right

“BRAVIA” Sync

([Control for HDMI])

The [Control for HDMI] function does not work (“BRAVIA” Sync).

t Check that [Control for HDMI] is set

to [On] (page 64).

t If you change the HDMI connection, turn the system off and on again. t If power failure occurs, set [Control for HDMI] to [Off], then set [Control

for HDMI] to [On] (page 64).

t Check the following and refer to the operating instructions supplied with the equipment.

• The connected equipment is compatible with the [Control for

HDMI] function.

• The connected equipment’s setting for the [Control for HDMI] function is correct.

Network connection

The system cannot connect to the network.

t Check the network connection

(page 27) and the network settings

(page 65).

Wireless LAN connection

You cannot connect your PC to the

Internet after [Wi-Fi Protected Setup

(WPS)] is performed.

t The wireless settings of the router may change automatically if you use the

Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly.

The system cannot connect to the network or the network connection is unstable.

t Check if the wireless LAN router is on.

t Check the network connection

(page 27) and the network settings

(page 65).

t Depending on the usage environment, including the wall material, radio wave reception conditions, or obstacles between the system and the wireless

LAN router, the possible communication distance may be shortened. Move the system and the wireless LAN router closer to each other.

t Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may interrupt communication. Move the main unit away from such devices, or turn off such devices.

t The wireless LAN connection may be unstable depending on the usage environment, especially while using the Bluetooth function of the system.

In this case, adjust the usage environment.

The wireless router you want is not shown in the wireless network list.

t Press RETURN to return to the previous screen, and try [Wireless

Setup(built-in)] again. If the wireless router you want is still not detected, select [Add a new address.] from the network list, then select [Manual

Registration] to input a network name

(SSID) manually.

75

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Left

Bluetooth device

Pairing cannot be done.

t Move the Bluetooth device closer to the main unit.

t Pairing may not be possible if other

Bluetooth devices are present around the main unit. In this case, turn off the other Bluetooth devices.

t Delete the system from your Bluetooth device and perform pairing again

(page 37).

Connecting cannot be done.

t The pairing registration information has been erased. Perform the pairing

operation again (page 37).

There is no sound.

t Make sure this system is not too far from the Bluetooth device, or this system is not receiving interference from a Wi-Fi network, other 2.4 GHz wireless device, or microwave oven.

t Check that the Bluetooth connection is made properly between this system and the Bluetooth device.

t Pair this system and the Bluetooth device again.

t Keep the system away from metal objects or surfaces.

t Make sure “BT” function is selected.

t Adjust the volume of the Bluetooth device first, if the volume level is still too low, adjust the volume level on the main unit.

The sound skips or fluctuates, or the connection is lost.

t The main unit and the Bluetooth device are too far apart.

t If there are obstacles between the main unit and your Bluetooth device, remove or avoid the obstacles.

t If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away.

Playable Discs

Blu-ray Disc

DVD

3)

CD

3)

BD-ROM

1)

BD-R/BD-RE

2)

DVD-ROM

DVD-R/DVD-RW

DVD+R/DVD+RW

CD-DA (Music CD)

CD-ROM

CD-R/CD-RW

Super Audio CD

1)

Since Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and version. Also, the audio output differs depending on the source, connected output jack, and selected

2) audio settings.

BD-RE: Ver.2.1

BD-R: Ver.1.1, 1.2, 1.3 including organic pigment type BD-R (LTH type)

BD-Rs recorded on a PC cannot be played if

3) postscripts are recordable.

A CD or DVD disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions supplied with the recording device.

Discs that cannot be played

• BDs with cartridge

• BDXLs

• DVD-RAMs

• HD DVDs

• DVD Audio discs

• PHOTO CDs

• Data part of CD-Extras

• Super VCDs

• Audio material side on DualDiscs

76

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Right

• For U.S.A. and Canada models: A disc recorded in a color system other than

NTSC, such as PAL (This system conforms to the NTSC color system.)

Notes on discs

This product is designed to play back discs that conform to the Compact Disc (CD) standard.

DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard. Therefore, these discs may not be compatible with this product.

Note on playback operations of a BD/DVD

Some playback operations of a BD/DVD may be intentionally set by software producers. Since this system plays a

BD/DVD according to the disc contents the software producers designed, some playback features may not be available.

Note on double-layer

BDs/DVDs

The playback picture and sound may be momentarily interrupted when the layers switch.

Region code (BD-ROM/DVD

VIDEO only)

Your system has a region code printed on the bottom of the main unit and will only play a BD-ROM/DVD VIDEO (playback only) labeled with identical region codes or

ALL

.

Playable Types of Files

Video

Video Codec

MPEG-1 Video

*1

MPEG-2 Video

*2

Xvid

MPEG4/AVC

VC1

*1

WMV9

*1

Motion JPEG

*5

*6

Container Extension

PS

PS

*3

TS

*4

.mpg, .mpeg

.mpg, .mpeg

.m2ts, .mts

AVI

MKV

MKV

*1

MP4

*1

TS

*1

.avi

.mkv

.mkv

.mp4, .m4v

.m2ts, .mts

.mov

Quick

Time

*6

3gpp/

3gpp2

*6

.3gp, .3g2,

.3gpp, .3gp2

TS

ASF

Quick

Time

AVI

.m2ts, .mts

.wmv, .asf

.mov

.avi

Video Format

AVCHD

*1*7

Container Extension

AVCHD Format

Folder

*8

Music

Audio Codec

MP3 (MPEG-1 Audio

Layer III)

Extension

.mp3, .mka

*6

AAC

*1

WMA9 Standard

*1

LPCM

FLAC

*6

.m4a, .aac

*6

, .mka

*6

.wma

.wav, .mka

*6

.flac, .fla

AC3

*6

.ac3, .mka

77

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Left

Photo

Photo Format

JPEG

PNG

GIF

MPO

Extension

.jpeg, .jpg, .jpe

.png

*9

.gif

*9

.mpo

*6*10

*1

*2

The system may not play this file format on a

DLNA server.

The system can only play standard definition

*3

*4 video on a DLNA server.

The system does not play DTS format files on a DLNA server.

The system can only play Dolby Digital format files on a DLNA server.

*5

*6

*7

*8

The system can support AVC up to Level 4.1.

The system does not play this file format on a

DLNA server.

The system can play AVCHD Ver.2.0 format

(AVCHD 3D/Progressive).

The system plays AVCHD format files that are recorded on a digital video camera, etc.

The AVCHD format disc will not play if it has

*9 not been correctly finalized.

The system does not play animated PNG or

*10 animated GIF files.

For MPO files other than 3D, the key image or the first image is displayed.

Note

• Some files may not play depending on the file format, the file encoding, the recording condition, or DLNA server condition.

• Some files edited on a PC may not play.

• Some files may not be able to perform fast forward or fast reverse function.

• The system does not play coded files such as

DRM and Lossless.

• The system can recognize the following files or folders in BDs, DVDs, CDs and USB devices:

– up to folders in the 9th layer (including the root folder)

– up to 500 files/folders in a single layer

• The system can recognize the following files or folders stored in the DLNA server:

– up to folders in the 19th layer

– up to 999 files/folders in a single layer

• The system can support frame rate:

– up to 60 fps for AVCHD only.

– up to 30 fps for other video codecs.

• The system can support video bit rate up to

40 Mbps.

• The system can support video resolution up to

1920 × 1080p.

• Some USB devices may not work with this system.

• The system can recognize Mass Storage Class

(MSC) devices (such as flash memory or an

HDD), Still Image Capture Devices (SICDs), and 101-key keyboards.

• The system may not play high bit rate video files from a DATA CD smoothly. It is recommended to play high bit rate video files using a DATA

DVD or DATA BD.

Supported Audio

Formats

Audio formats supported by this system are as follows.

Format

LPCM 2ch

LPCM 5.1ch

LPCM 7.1ch

Dolby Digital

Dolby TrueHD,

Dolby Digital

Plus

DTS

DTS-ES

Discrete 6.1,

DTS-ES Matrix

6.1

DTS96/24

DTS-HD High

Resolution

Audio

DTS-HD Master

Audio

Function

“BD/DVD” “HDMI1”

“HDMI2” a a

“TV”

(DIGITAL IN) a a a a a a a* a a a a

– a

– a a* a*

– a

– a a* a*

– a: Supported format.

–: Unsupported format.

* Decoded as DTS core.

78

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Right

Note

• The HDMI (IN 1) and HDMI (IN 2) jacks do not input sound in the case of an audio format that contains copy protections such as Super Audio

CD or DVD-Audio.

• For LPCM 2ch format, the supported sampling frequency of the digital signal is up to 96 kHz when using the “HDMI1” or “HDMI2” function, and 48 kHz when using the “TV” function.

• For LPCM 5.1ch format, the supported sampling frequency of the digital signal is up to

48 kHz when using the “HDMI1” or “HDMI2” function.

Specifications

Amplifier Section

U.S.A. model only:

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

(FTC)

Front L + Front R:

With 6 ohms loads, both channels driven, from 180 Hz – 20,000 Hz; rated 75 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output.

Other models:

POWER OUTPUT (rated)

Front L/Front R:

125 W + 125 W (at 6 ohms, 1 kHz,

1% THD)

POWER OUTPUT (reference)

Front L/Front R:

200 W (per channel at 6 ohms, 1 kHz)

Center:

200 W (at 6 ohms, 1 kHz)

Subwoofer:

200 W (at 6 ohms, 80 Hz)

Inputs (Analog)

AUDIO (AUDIO IN)

Sensitivity: 1.8 V/600 mV

Inputs (Digital)

TV (Audio Return Channel/OPTICAL)

Supported formats: LPCM 2CH (up to

48 kHz), Dolby Digital, DTS

HDMI (IN 1)/HDMI (IN 2)

Supported formats: LPCM 5.1CH

(up to 48 kHz), LPCM 2CH (up to

96 kHz), Dolby Digital, DTS

HDMI Section

Connector

Type A (19pin)

BD/DVD/Super Audio CD/CD System

Signal format system

NTSC

USB Section

(USB) port:

Type A (For connecting USB memory, memory card reader, digital still camera, and digital video camera)

LAN Section

LAN (100) terminal

100BASE-TX Terminal

Wireless LAN Section

Blu-ray Disc/DVD receiver

(HBD-N9100W/HBD-N8100W/

HBD-N7100W)

Standards Compliance

IEEE 802.11 b/g/n

Frequency and Channel

2.4 GHz band: channels 1–11

Bluetooth Section

Communication system

Bluetooth Specification version 3.0

Output

Bluetooth Specification Power Class 2

Maximum communication range

Line of sight approx. 10 m (33 ft)

1)

Frequency band

2.4 GHz band

Modulation method

FHSS (Freq Hopping Spread Spectrum)

Compatible Bluetooth profiles

2)

A2DP 1.2 (Advanced Audio Distribution

Profile)

AVRCP 1.3 (Audio Video Remote

Control Profile)

Supported Codecs

3)

SBC

4)

, AAC

79

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Left

Transmission range (A2DP)

20 Hz – 20,000 Hz (Sampling frequency

44.1 kHz, 48 kHz)

1)

The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna’s performance, operating

2) system, software application, etc.

Bluetooth standard profiles indicate the purpose

3) of Bluetooth communication between devices.

Codec: Audio signal compression and

4) conversion format

Subband Codec

FM Tuner Section

System

PLL quartz-locked digital synthesizer

Tuning range

87.5 MHz – 108.0 MHz (100 kHz step)

Antenna (aerial)

FM wire antenna (aerial)

Antenna (aerial) terminals

75 ohms, unbalanced

Speakers

Front (SS-TSB126) for BDV-N9100W/

BDV-N8100W

Surround (SS-TSB131) for

BDV-N9100W

Dimensions (w/h/d) (approx.)

102 mm × 700 mm × 60 mm (4 1 /

8

in ×

27 5 /

8

in × 2 3 /

8

in) (wall-mounted part)

270 mm × 1,200 mm × 270 mm

(10 3 /

4

in × 47 1 /

4

in × 10 3 /

4

in)

(whole speaker)

Mass (approx.)

1.7 kg (3 lb 12 oz) (wall-mounted part)

4.0 kg (8 lb 14 oz) (whole speaker)

Front (SS-TSB125) for BDV-N7100W

Surround (SS-TSB129) for

BDV-N8100W/BDV-N7100W

Dimensions (w/h/d) (approx.)

100 mm × 435 mm × 54 mm (4 in ×

17 1 /

4

in × 2 1 /

4

in) (without stand)

140 mm × 455 mm × 140 mm (5 5 /

8

in ×

18 in × 5 5 /

8

in) (with stand)

Mass (approx.)

1.1 kg (2 lb 7 oz) (without stand)

1.2 kg (2 lb 11 oz) (with stand)

Center (SS-CTB124) for

BDV-N9100W/BDV-N8100W/

BDV-N7100W

Dimensions (w/h/d) (approx.)

365 mm × 75 mm × 75 mm (14 3 /

8

in ×

3 in × 3 in)

Mass (approx.)

1.3 kg (2 lb 14 oz)

Subwoofer (SS-WSB125) for

BDV-N9100W/BDV-N8100W/

BDV-N7100W

Dimensions (w/h/d) (approx.)

280 mm × 440 mm × 280 mm (11 1 /

8

in ×

17 3 /

8

in × 11 1 /

8

in)

Mass (approx.)

8.0 kg (17 lb 11 oz)

General

Main unit

Power requirements

120 V AC, 60 Hz

Power consumption

On: 80 W

Standby: 0.3 W (For details on the

setting, see page 55.)

Dimensions (w/h/d) (approx.)

480 mm × 79 mm × 212 mm (19 in ×

3 1 /

8

in × 8 3 /

8

in) incl. projecting parts

480 mm × 79 mm × 226 mm (19 in ×

3 1 /

8

in × 9 in) (with the wireless transceiver inserted)

Mass (approx.)

3.1 kg (6 lb 14 oz)

80

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Right

Surround amplifier (TA-SA300WR) for BDV-N9100W/BDV-N8100W/

BDV-N7100W

Amplifier Section

U.S.A. model only:

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

(FTC)

With 3 ohms loads, both channels driven, from 180 Hz – 20,000 Hz; rated 45 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output.

Other models:

POWER OUTPUT (reference)

Surround L/Surround R:

100 W (per channel at 3 ohms, 1 kHz)

Rated impedance:

3

: – 16 :

Power requirements

120 V AC, 60 Hz

Power consumption

On: 50 W

Standby power consumption

0.5 W (standby mode)

0.2 W (turned off)

Dimensions (w/h/d) (approx.)

206 mm × 60 mm × 236 mm

(8 1 /

8

in × 2 3 /

8

in × 9 3 /

8

in) with the wireless transceiver inserted

Mass (approx.)

1.3 kg (2 lb 14 oz)

Wireless transceiver (EZW-RT50)

Communication system

Wireless sound Specification version 1.0

Frequency band

5.736 GHz – 5.814 GHz

Modulation method

DSSS

Power requirements

DC 3.3 V, 300 mA

Dimensions (w/h/d) (approx.)

30 mm × 9 mm × 60 mm

(1 3 /

16

in × 3 /

8

in × 2 3 /

8

in)

Mass (approx.)

10 g ( 1 /

2

oz)

Design and specifications are subject to change without notice.

• Standby power consumption: 0.3W (Main

Unit), 0.2W (Surround Amplifier).

• Over 85% power efficiency of amplifier block is achieved with the full digital amplifier, S-Master.

81

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Left

Language Code List

The language spellings conform to the ISO 639: 1988 (E/F) standard.

Code Language Code Language Code Language Code Language

1027 Afar

1028 Abkhazian

1032 Afrikaans

1039 Amharic

1044 Arabic

1045 Assamese

1051 Aymara

1052 Azerbaijani

1183 Irish 1347 Maori 1507 Samoan

1186 Scots Gaelic 1349 Macedonian 1508 Shona

1194 Galician

1196 Guarani

1350

1352

Malayalam

Mongolian

1509

1511

Somali

Albanian

1203 Gujarati

1209 Hausa

1217 Hindi

1226 Croatian

1353

1356

1357

1358

Moldavian

Marathi

Malay

Maltese

1512

1513

1514

1515

Serbian

Siswati

Sesotho

Sundanese

1053 Bashkir 1229 Hungarian

1057 Byelorussian 1233 Armenian

1059 Bulgarian

1060 Bihari

1235

1239

Interlingua

Interlingue

1061 Bislama 1245 Inupiak

1066 Bengali; 1248 Indonesian

Bangla

1067 Tibetan

1253

1254

Icelandic

Italian

1363

1365

1369

1376

1379

1393

1403

1408

Burmese

Nauru

Nepali

Dutch

Norwegian

Occitan

(Afan)Oromo

Oriya

1516

1517

1521

1525

1527

1528

1529

1531

Swedish

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

1070 Breton

1079 Catalan

1093 Corsican

1097 Czech

1103 Welsh

1105 Danish

1109 German

1130 Bhutani

1142 Greek

1144 English

1145 Esperanto

1149 Spanish

1150 Estonian

1151 Basque

1157 Persian

1165 Finnish

1166 Fiji

1171 Faroese

1174 French

1181 Frisian

1257 Hebrew

1261 Japanese

1269 Yiddish

1283 Javanese

1287 Georgian

1297 Kazakh

1298 Greenlandic

1299 Cambodian

1300 Kannada

1301 Korean

1305 Kashmiri

1307 Kurdish

1311

1313 Latin

1326 Lingala

1327 Laothian

1332 Lithuanian

1334

1345

Kirghiz

Latvian;

Lettish

Malagasy

1417 Punjabi

1428 Polish

1435 Pashto;

Pushto

1436 Portuguese

1463 Quechua

1481 Rhaeto-

Romance

1482 Kirundi

1483 Romanian

1495 Sanskrit

1498 Sindhi

1501 Sangho

1505 Slovak

1506 Slovenian

1532 Tagalog

1534 Setswana

1535 Tonga

1538 Turkish

1539 Tsonga

1540 Tatar

1543 Twi

1557 Ukrainian

1564 Urdu

1572 Uzbek

1489 Russian 1581 Vietnamese

1491 Kinyarwanda 1587 Volapük

1613 Wolof

1632 Xhosa

1665 Yoruba

1502 Serbo-Croatian 1684 Chinese

1503 Singhalese 1697 Zulu

1703 Not specified

82

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\100ADD.fm

masterpage: Right

Parental Control/Area Code List

Code Area

2044 Argentina

2047 Australia

2046 Austria

2057 Belgium

2070 Brazil

2090 Chile

2092 China

2093 Colombia

2115 Denmark

2165 Finland

2174 France

Code Area Code Area Code Area

2109 Germany

2200 Greece

2219 Hong Kong

2248 India

2238 Indonesia

2239 Ireland

2254 Italy

2362 Mexico 2499 Sweden

2376 Netherlands 2086 Switzerland

2390 New Zealand 2543 Taiwan

2379

2427

2424

Norway

Pakistan

Philippines

2428 Poland

2528 Thailand

2184 United

Kingdom

2276 Japan

2304 Korea

2436 Portugal

2489 Russia

2333 Luxembourg 2501 Singapore

2363 Malaysia 2149 Spain

83

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\010COVIX.fm

masterpage: Left

Index

Numerics

3D 35

3D Output Setting 59

A

A/V SYNC 46

Attenuate - AUDIO 62

Audio DRC 61

Audio Language 63

Audio Output 62

Audio Return Channel 64

Audio Settings 61

Auto Calibration 50, 62

Auto Display 64

B

BD Audio MIX Setting 61

BD Hybrid Disc Playback Layer 63

BD Internet Connection 63

BD Parental Control 63

BD/DVD Menu Language 63

BD/DVD Viewing Settings 63

BD-LIVE 35

BD-ROM 24p Output 60

Bluetooth 37

BONUSVIEW 35

BRAVIA Sync 49

C

CD 76

Child Lock 53

Cinema Conversion Mode 60

Connection Server Settings 66

Control for HDMI 49, 64

D

D.C.A.C. DX (Digital Cinema Auto

Calibration DX) 50

DLNA 41, 66

Dolby Digital 46

DTS 46

DVD 76

DVD Aspect Ratio 60

DVD Parental Control 63

DVD-ROM 24p Output 60

E

Easy Network Settings 66

Easy Setup 31

External Input Settings 65

F

FM Mode 47

Front panel 15

G

Gracenote Settings 65

H

HDMI

YCbCr/RGB (HDMI) 61

HDMI Deep Color Output 61

I

Initialize Personal Information 66

Internet content 40

Internet Settings 65

Internet Video Parental Control 63

Internet Video Unrated 63

84

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\010COVIX.fm

masterpage: Right

L

Language Code List 82

M

Main Unit illumination 64

Multiplex broadcast sound 47

Music Settings 64

N

Network Connection Diagnostics 66

Network Settings 65

Network Update 59

NFC 39

O

OSD Language 64

P

Parental Control Area Code 63

Parental Control Settings 63

PARTY Auto Start 66

Password 63

Pause Mode 61

Play information 36

Playable discs 76

Power Save Drive 64

Preset Mode 59

Q

Quick Start Mode 64

R

Rear panel 18

Region code 77

Registered Remote Devices 66

Remote control 19

Remote Control Setting Guide 59

Remote Start 66

Renderer Access Control 66

Renderer Options 66

Reset to Factory Default Settings 66

Resetting 66

S

SBM 61

Screen Format 60

Screen Saver 65

Screen Settings 59

SLEEP 52

Slideshow 45

Software License Information 65

Sound Effect 62

Speaker Settings 51, 62

Distance 51

Level 51

Subtitle Language 63

Super Audio CD Playback Channel 64

Super Audio CD Playback Layer 64

Surround amplifier 18

System Information 65

T

Test Tone 52

Top panel 15

Top panel display 17

TV Screen Size Setting for 3D 59

TV Type 60

U

Update 59

USB 36

85

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\010COVIX.fm

W

WEP 28

Wireless Sound Connection 64

WPA2-PSK (AES) 28

WPA2-PSK (TKIP) 28

WPA-PSK (AES) 28

WPA-PSK (TKIP) 28

masterpage: Left

86

US

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456334121_US (U)\110BCO.fm

masterpage: Left

The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL.

http://www.sony.com/blurayhtsupport/

©2013 Sony Corporation Printed in Malaysia

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-334-12(1)

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents