Sony | BVM-L230 | User's Manual | Sony BVM-L230 User's Manual

BVM-L230
Professional Master Monitor
www.sonybiz.net/monitors
Fulfilling Your Master Monitoring Needs Even Further –
the BVM-L230 TRIMASTER LCD Monitor
02
Responding to the continued demands
for a true master monitor, Sony
introduces the BVM-L230, a 23-inch*
LCD master monitor that uses Sony
exclusive TRIMASTER™ technology.
Designed from the foundation of the
market-acclaimed BVM CRT evaluation monitors, the BVM-L230 has been
designed to inherit and surpass its CRT
predecessors – in both image quality
and operational performance.
The stunning quality of the BVM-L230
is only made possible by the use of
three newly developed Sony technologies – a high-grade, 10 bit 23-inch* full
resolution LCD panel, a new precision
backlight system and an exclusive
new display engine – all of which have
been optimised for producing images
at master monitor quality on a flat-panel platform. By combining such devices
with sophisticated colour management
algorithms and advanced feedback
systems, the BVM-L230 achieves highly
precise colour reproduction, image
consistency and image uniformity to
the same degree – or higher – as its CRT
predecessors.
For monitor setup and control, the
BVM-L230 retains the same operational
convenience as the BVM CRT series,
including its remote-control panel
design and features such as Auto
White Balance, Blue Channel Display,
Monochrome Display, RGB Cut Off, H/V
delay, Chroma Up and Safety Markers.
The BVM-L230 also takes maximum
advantage of its new signal processing
technology, enabling unprecedented
performance for today’s new master monitoring needs. Such features
include a newly developed colour
gamut emulation function, a unique
Picture & Picture display function,
a wide variety of PC and A/V input
capabilities from VGA to WUXGA
and from composite to 2K XYZ 4:4:4
display, a Modular Control System and
an Interlace Display Mode. Where
top-quality monitoring is a necessity,
the BVM-L230 is the ideal solution
of choice from high-end acquisition, production, post-production and
broadcast monitoring, right through to
Telecine applications.
* 22.5-inch viewable area, measured diagonally.
TRIMASTER Technology
TRIMASTER technology is a design
archi­tecture used to bring out the full
performance capabilities required for
evaluation displays. It comprises the core
technologies that enable the highest
level of colour accuracy, precision imaging and quality picture consistency.
03
>C
olour Management System
>W
ide Colour Gamut
>D
igital Uniformity Adjustment
Accurate
Colour
Reproduction
Precision
Imaging
> High Resolution & Wide Colour Gamut
> High Motion Picture Processing
> Accurate Pixel Mapping
Quality
Picture
Consistency
> Accurate Signal Processing
> Precise Display Calibration System
> New Colour Feedback System
Main Features
The BVM-L230 incorporates three unique technologies that have been customised for exclusive use in this monitor:
a high-grade 23-inch* full resolution LCD panel, a precision backlight system, and a unique professional display
engine not found in any other monitor. This has resulted in the highly reliable BVM-L230, which offers the accurate colour
reproduction, precision imaging and quality picture consistency required by today’s most demanding master monitoring
applications. Using these technologies, the BVM-L230 not only achieves the quality of its predecessor BVM-A and
BVM-D Series CRT monitors, but also adds innovative features for today’s new master monitoring needs.
* 22.5-inch viewable area, measured diagonally.
04
Superb Picture Quality and Stable Colour Temperature
Accurate Colour Reproduction
Ultra-high precision Uniformity Correction
Precision Imaging
Nonlinear Cubic Conversion Colour
Management System
Typically, LCD monitors exhibit poor
uniformity performance. With the
BVM-L230, white can be reproduced
uniformly at every point of the screen.
This is due to the use of two advanced
technologies: precise adjustment of the
LCD panel characteristics and sophisticated LED backlight control. At the
factory, grayscale levels are precisely
measured at each area of the panel and
if differences are detected between
areas, they are accurately corrected
by electrical means. Secondly, the sophisticated LED backlight system also
contributes to the BVM-L230’s high
level of uniformity. This is because RGB
sensors are aligned together with the
R, G and B LEDs of the backlight to
constantly monitor and control the
luminance level of each backlight
colour. When inconsistent luminance is
detected, the colour feedback system
adjusts the light intensity of the corresponding LEDs – red, green, or blue –in
that specific area to maintain accurate
luminance uniformity of the backlight.
These two technologies combined
together allow the BVM-L230 monitor
to provide an extra level of uniformity.
Full HD Panel with 10-bit Driver
The nonlinear cubic conversion colour
management system of the BVM-L230
uses a unique 3-D LUT (look-up table)
to reproduce an extremely wide colour
gamut, thus offering more accurate
colour reproduction. It offers highly
accurate chromaticity throughout the
entire grayscale. The combination of
its high-purity LED backlight system, together with this colour management
system, allows the BVM-L230 to accurately reproduce colour gamut that
replicate broadcast standards such
as ITU-R BT.709, and EBU and SMPTE-C
phosphor standards. In addition, the
BVM-L230 offers a unique “WIDE” gamut
that reproduces a wider colour space.
This can be used to monitor content
intended for applications other than
direct broadcast, and it can also emulate the D-Cine* colour gamut used in
digital cinema production. Compared
to past CRT monitors, which offer only
one colour gamut per model, the
BVM-L230 allows these colour gamuts
to be selected and reproduced on the
same monitor – a feature only made
possible by the technologies used in
the Sony BVM-L230 monitor.
* “D-Cine” is a colour gamut emulating the colour
gamut described in SMPTE 431-2 Table A1. However,
the chromaticity of the green-red region is not
covered in full.
0.900
0.800
0.700
520
510
530
540
550
560
0.600
0.500
D-Cine
EBU
SMPTE-C
BVM-L Wide
570
500
580
0.400
0.300
590
600
610
620
490
700~
780
0.200
0.100
0.000
480
470
380~410
460
0.100
0.200
0.300
0.400
0.500
0.600
0.700
0.800
The BVM-L230 achieves both high resolution and stunning colour depth using
a full 1920 x 1080 HD LCD panel and
precise 10-bit driver.
Newly Developed I/P Conversion Technology
The BVM-L230 uses a sophisticated
I/P conversion technique that keeps
artefacts that are often seen in typical
LCD monitors to a minimum, such as
edge jaggedness, conversion errors,
and a picture delay that is less than
one field.
Quality Picture Consistency
High Accuracy Display Engine
Each and every BVM-L230 monitor is
carefully calibrated at the factory on an
individual basis, providing a high level
of accuracy and stability for characteristics such as gamma and uniformity.
Colour Feedback System
Using a colour feedback system, the
BVM-L230 achieves the stability called
for with master monitor applications.
Main Features
Multi-format Signal Support
Dual-Link HD-SDI Interface
Input Versatility
The BVM-L230 can accept almost any SD or HD video format, both analogue and digital, plus PC signals from VGA
to WUXGA (1920 x 1200). In addition to a DVI-D interface equipped as standard, four option board slots are offered to
configure the BVM-L230 according to different user needs. The optional analogue interfaces accept composite, Y/C,
Y/PB/PR, RGB. Digital interfaces accept SD-SDI, HD-SDI, and Dual-Link HD-SDI inputs. Acceptable signal formats include:
525/60i, 625/50i, 525/60P, 625/50P, 720/50P and 720/60P, 10-bit/12-bit RGB 4:4:4 1080/24PsF, 1080/24P, 1080/25PsF, 1080/25P,
1080/50i, 1080/30PsF, 1080/30P and 1080/60i, 10-bit 4:2:2 1080/50P and 1080/60P and the digital cinema formats of 12-bit
4:4:4 XYZ/RGB 2048 x1080/24PsF and 2048x1080/24P.
No
System
Nomenclature
Samples per
active line
Active lines
per frame
Frame Rate fV
(Hz)
Interface sampling
freq (MHz)
Samples per
active line
Total lines
per frame
Line Frequency
fH (kHz)
Standard
1
525/59.94i
720
487
59.94
13.5
858
525
15.73
Rec.ITU-R BT.601
2
625/50i
720
576
50
13.5
864
525
15.63
Rec.ITU-R BT.601
3
525/59.94P
720
483
59.94
27
858
625
31.47
SMPTE 293M/Rec.ITU-R BT.1358
4
625/50P
720
576
50
27
864
525
31.25
Rec.ITU-R BT.1358
5
1920 x 1080/24PsF*
1920
1080
48/47.95
74.25 - 74.25/1.001
2750 - 2750
625
27.00
SMPTE RP 211
6
1920 x 1080/24P*
1920
1080
24/23.97
74.25 - 74.25/1.001
2750
1125
27.00
SMPTE 274M
7
1920 x 1080/25PsF
1920
1080
50
1125
28.13
RP 211
8
1920 x 1080/25P
1920
1080
25
74.25
2640
1125
28.13
SMPTE 274M
9
1920 x 1080/50i
1920
1080
50
74.25
2640
1125
28.13
SMPTE 274M
10
1920 x 1080/30PsF*
1920
1080
60/59.94
1125
33.75
RP 211
11
1920 x 1080/30P*
1920
1080
30/29.97
74.25 - 74.25/1.001
2200
1125
33.75
SMPTE 274M
12
1920 x 1080/60i*
1920
1080
6/59.94
74.25 - 74.25/1.001
2200 - 2200
1125
33.75
SMPTE 274M
13
1280 x 720/24P*
1280
720
24/23.97
74.25 - 74.25/1.001
4125
1125
18.00
SMPTE 296M
14
1280 x 720/25P
1280
720
25
74.25
3960
750
18.75
SMPTE 296M
15
1280 x 720/30P*
1280
720
30/29.97
74.25 - 74.25/1.001
3300
750
22.50
SMPTE 296M
16
1280 x 720/50P
1280
720
50
74.25
1980
750
37.50
SMPTE 296M
17
1280 x 720/60P*
1280
720
60/59.94
74.25 - 74.25/1.001
1650 - 1650
750
45.00
SMPTE 296M
18
1920 x 1080/50P
1920
1080
50
148.5
2640
750
56.25
SMPTE 274M
19
1920 x 1080/60P*
1920
1080
60/59.94
148.5 - 148.5/1.001
2200
1125
67.50
SMPTE 274M
20
2048 x 1080/24PsF*
2048
1080
48/47.95
74.25 - 74.25/1.001
2750
1125
27.00
21
2048 x 1080/24P*
2048
1080
24/23.97
74.25 - 74.25/1.001
2750
1125
27.00
* Also compatible with 1/1.001 frame rates.
05
Main Features
Input Board Slots
06
Flexible Input Configuration
Like the BVM-A Series CRT monitors, the BVM-L230 uses a modular slot design, so inputs can be configured according to
individual needs. Four input board slots are available. Optional input boards* can be installed in any board slot, and in
any combination, allowing easier configuration and better cost-per-input value. These option boards utilise only one slot
each, so up to four cards can be installed for maximum flexibility.
* The BVM-L230 input boards are not compatible with other earlier BVM-A Series CRT monitors. They are compatible with the LMD Series.
Interface chart by Input Boards
Input Signal
System
Nomenclature
HD-SDI
BKM-229X
BKM-243HS***
525/59.94i
Y/PB/PR, GBR
•
1080/24Psf
Y/PB/PR, GBR
•
1080/24P
Y/PB/PR, GBR
•
1080/50i (25PsF)
Y/PB/PR, GBR
•
1080/25P
Y/PB/PR, GBR
•
625/50P
Y/PB/PR, GBR
•
525/59.94P
Y/PB/PR, GBR
•
1080/60i (30PsF)**
Y/PB/PR, GBR
•
1080/30P**
Y/PB/PR, GBR
•
720/50P
Y/PB/PR, GBR
•
720/60P**
525/59.94i
625/50i
1080/24PsF**
Y/PB/PR, GBR
Y/PB/PR
Y/PB/PR
10bit 4:2:2 Y/PB/PR
1080/25PsF
10bit 4:2:2 Y/PB/PR
•
1080/30PsF**
10bit 4:2:2 Y/PB/PR
•
1080/50i
10bit 4:2:2 Y/PB/PR
•
1080/60i**
10bit 4:2:2 Y/PB/PR
•
1280 x 720/60P**
10bit 4:2:2 Y/PB/PR
•
1280 x 720/50P
10bit 4:2:2 Y/PB/PR
10bit 4:4:4 Y/PB/PR, GBR
12bit 4:4:4 GBR
10bit 4:4:4 Y/PB/PR, GBR
12bit 4:4:4 GBR
10bit 4:4:4 Y/PB/PR, GBR
12bit 4:4:4 GBR
10bit 4:4:4 Y/PB/PR, GBR
12bit 4:4:4 GBR
10bit 4:4:4 Y/PB/PR, GBR
10bit 4:4:4 Y/PB/PR, GBR
12bit 4:4:4 GBR
10bit 4:4:4 Y/PB/PR, GBR
12bit 4:4:4 GBR
10bit 4:2:2 Y/PB/PR
10bit 4:2:2 Y/PB/PR
10bit 4:4:4 Y/PB/PR, GBR
12bit 4:4:4 GBR
10bit 4:4:4 Y/PB/PR, GBR
12bit 4:4:4 GBR
1080/24PsF**
1080/24P**
1080/25PsF
1080/25P
1080/30PsF**
1080/30P**
Dual-Link HD-SDI
BKM-227W
625/50i
625/50i
SD-SDI
BKM-220D
Composite,Y/C
(NTSC/PAL/PAL-M/SECAM)
Composite,Y/C
(NTSC/PAL/PAL-M/SECAM)
Y/PB/PR, GBR
525/59.94i
Analogue Input
Signal Format
1080/50i
1080/60i**
1080/50P
1080/60P**
2048 x 1080/24PsF**
2048 x 1080/24P**
•
•
•
•
•
•
•
•
•
•
•*
•*
•*
•*
•*
•*
•*
•*
•*
•*
•*
•*
Number of digital inputs
2
-
-
2
Number of analogue inputs
-
1
1
-
* Two BKM-243HS optional boards are used.
** Also compatible with 1/1.001 frame rates.
*** BKM-243HS automatically detects SD-SDI and HD-SDI input signals.
Main Features
Three Key Devices Enabling Master Monitor Picture Quality
Customised LCD Panel – 23-inch*
Full HD Resolution
Professional Display Engine
Precision Backlight System
07
The LCD panel has been developed
exclusively for use on the BVM-L230,
based on strict master monitor criteria.
It offers a 10-bit driver and other highlevel specifications such as high operating frame rates and high-speed response.
* 22.5-inch viewable area, measured diagonally.
Using Sony-designed high-purity LEDs,
the precision backlight system is also
a development used exclusively in
the BVM-L230. This enables the widest
colour gamut ever offered in a Sony
monitor and fully covers broadcaststandard colour spaces. The precision
backlight system also incorporates
a uniformity control function and a
colour feedback system.
The high-precision signal processing
engine has been developed to fulfill
master monitor criteria and is optimised
for use on the BVM-L230. This engine
incorporates 12-bit output accuracy
at each process and provides a
high-quality I/P conversion algorithm
and a highly accurate colour management system.
Signal-interface Options
BKM-220D, SD-SDI 4:2:2 Input Adaptor
SD-SDI signal input (x2)
SD-SDI monitor output (x1)
> SD-SDI signal input (x2)
BKM-243HS, HD-SDI/SD-SDI Input Adaptor
HD-SDI/SD-SDI signal input (x2)
HD-SDI/SD-SDI monitor output (x1)
> HD-SDI/SD-SDI signal input (x2)
> SD-SDI monitor output (x1)
> HD-SDI/SD-SDI monitor output (x1)
> Power consumption: 1.5 W
> Power consumption: 2.0 W
* HD-SDI and SD-SDI signals are automatically detected
BKM-227W, NTSC/PAL* Input Adaptor
Composite input/output (x1)
Y/C input/output (x1)
> Composite input/output (x1)
> Y/C input/output (x1)
> Power consumption: 1.8 W
* NTSC, PAL, PAL-M, and SECAM are accepted.
BKM-229X, Analogue Component Adaptor
RGB/ Y/PB/PR input (x1)
EXT SYNC (x1)
> RGB,Y/PB/PR input (x1)
> EXT SYNC (x1)
> Power consumption: 4.0 W
Operational Convenience
The BVM-L230 is equipped with the same acclaimed functions and operational conveniences of its predecessors, the
BVM-A Series and BVM-D Series CRT master monitors. However, it also has some additional unique features, which are
only made possible by Sony flat-panel technology.
08
The BVM-L230 monitor and the BKM-16R controller
attached with the BKM-37H attachment stand.
Modular Monitor Control Unit (BKM-16R)
Like the earlier BVM Series, the monitor and control panel are provided as separate units, allowing greater flexibility
in system integration. The BVM-L230 incorporates a new Monitor Control Unit, the BKM-16R, which can be attached
below the monitor using the optional Controller Attachment Stand, the BKM-37H, or connected remotely via an Ethernet cable.
Ethernet-based Remote Control
Like the BVM-A* Series monitors and controller, the BVM-L230 monitor and the BKM-16R Monitor Control Unit are
equipped with an Ethernet port, allowing remote control of display parameters across a standard Ethernet connection.
One BKM-16R Monitor Control Unit can control up to thirty-two (32) BVM monitors.
* The BKM-16R Monitor Control Unit can also control the BVM-A Series CRT monitors.
BKM-16R Monitor Control Unit
Front Panel
Rear Panel
Operational Convenience
Picture & Picture (Side by Side, Butterfly, Wipe and Blending)*
* A Future Feature (by spring 2008)
The unique Picture & Picture function
of the BVM-L230 allows simultaneous
display of two input signals on its LCD
screen. This function is extremely
convenient for making instant adjustments between two input sources,
since there is no need to individually
adjust the different characteristics of
two monitors. This function comes in
handy for adjustments between two
cameras, special effects creation,
time-lapse shooting and computergenerated graphics work. The BVM-L230
offers four Picture & Picture modes:
Native Scan (pixel to pixel display)
WIPE
The area of the two pictures to be
displayed is selected using a vertical
WIPE pattern, which is controlled from
the BKM-16R. This function is useful when
picture details of the two images must
Side by Side
be examined on a pixel basis. This is norThe two picture images are downscaled mally used when looking at still images.
using a digital filter and displayed side
by side. This feature is convenient when
making white balance adjustments
and/or determining shooting angles
between two cameras.
Conventional flat-panel monitors reproduce images using scaling and I/P
conversion due to their fixed pixel counts
and progressive scanning processes. The
Native Scan function equipped on the
BVM-L230 is a unique display mode that
reproduces images without changing
the input signal’s pixel count. For
example, when an SD signal is input, the
BVM-L230 will reproduce the image at a
picture size of 720 x 487* pixels, and when
an interlace signal is input, the BVM-L230
will reproduce interlace fields**. For
SD input in particular, the Native Scan
function also allows the image’s display size to be doubled to 1440 x 974*,
by duplicating and doubling each pixel
both horizontally and vertically.
* 525/59.94i signal specified by Rec. ITU-R BT.601
** The brightness of the picture remains unchanged due to the precision backlight system
Blending
The two picture images are overlapped 1920 x 1080 Native Scan
720 x 487 Native Scan
for display. The mix ratio is adjustable. This
function is useful when verifying whether
a foreground signal is accurately keyed
Butterfly
into the background signal, or when
The two inputs are displayed as line- combining shoots with live action and
symmetric images on the left and right computer-generated effects.
halves of the screen. By controlling the
H position, the two images can be
1440 x 974 Native Scan
moved inward to the middle of the
(720 x 487) x 2
screen. Instant comparisons can be
Scan Switch
made without having to move one's
The Scan Switch allows switching
eyes. This makes comparison of moving
between 5% blanking (or 95% area
images very easy.
display) and conventional 0% and -3%
Under Scan mode.
09
Operational Convenience
10
Variety of Display Modes
Most flat-panel monitors can only
display progressive images at the input signal’s frame rate. In addition
to this conventional display method,
the BVM-L230 has two unique display
modes: Black Frame Insertion Display
and Interlace Display.
Black Frame Insertion Display*
Combining its high frame-rate operation with a unique Black Frame
Insertion technology, the BVM-L230
dramatically reduces motion blur, an
artefact that is inherent to LCD devices.
Black Frame Insertion technology generates a “black” frame and inserts
this in every other picture frame. As a
result, all of the panel’s LCD molecules
are reset to their default alignments,
before the next picture frame is displayed. This effectively eliminates the
image lag caused by inconsistencies in
the speed at which LCD molecules are
realigned in accordance with the video signal change. Because the number
of frames is doubled, Black Frame Insertion Display reproduces the combined
picture content at twice the speed of
the input signal’s frame rate**.
Interlace Display*
+12dB Chroma Up function
The Interlace Display mode of the
BVM-L230 can display interlace input
signals as interlace fields. As with the
Native Scan function, the Interlace
Display mode offers faithful reproduction of the input signal and the
displayed interlace fields are free from
picture degradation.
A “Chroma UP” button located on
the BKM-16R front panel allows the
Chroma Level to be boosted by +12 dB.
This is a convenient feature for adjusting
camera white balance with a higher
degree of accuracy.
* The brightness of the picture can be maintained
by the precision backlight system.
** The frame rates of 120 Hz and 100 Hz
are supported.
100/120Hz
Interlace Display
100/120Hz
Black Frame Insertion Display
Operational Convenience
BVM-L230 with the 16:9 Mask
16:10 Mask
16:9 Mask
Marker Settings
Marker Examples
Like the earlier BVM Series CRT monitors, the BVM-L230 monitor can display
various markers, including an aspect
marker, safe area marker, and centre
marker. In addition to this flexible selection of marker types, detailed display
settings of each marker are offered.
For example, the colour, the brightness,
horizontal/ vertical position and width
of aspect markers can all be controlled, while the height and width of
safe area markers can be adjusted.
What’s more, users can also choose to
display two safe area markers, each
selectable between three marker variations. These flexible marker controls,
together with the choice of many
different marker types such as aspect
marker types (lines or aspect blanking)
and centre marker types (long or short),
make the BVM-L230 monitor the
perfect all-round display device for a
variety of shooting scenarios – from SD/
HD video acquisition to digtal cinematography.
Marker Variation
Safe Area Marker
Selectable Markers
Line Colours
Line Width
Line Luminance
%
Dot (Pixel)
80%, 88%, 90%,
93%, or variable
Flexible
Aspect Marker
16:9, 15:9, 14:9,
13:9, 4:3, 2.39:1, 2.35:1,
1.896:1. 1.85:1, or 1.66:1
White, Red, Green, Blue,Yellow, Cyan, or Magenta
Thick or Thin
90 IRE or 40 IRE
Screen Size: 16:9
Aspect Mode: 2.35:1
Aspect Marker Colour : Magenta
Marker Brightness: 90IRE
Width: Thick
Safe Area: Shape A
Area Size: 80%
Centre Marker: Short
Aspect Blanking: Off
Screen Size: 16:9
Aspect Mode: 14:9
Aspect Marker Colour: Yellow
Marker Brightness: 40IRE
Width: Thin
Safe Area: Shape B
Area Size: 80%
Centre Marker: Short
Aspect Blanking: Half
Screen Size: 16:9
Aspect Mode: 4:3
Aspect Marker Colour: Green
Marker Brightness: 90IRE
Width: Thick
Safe Area: Sape C
Area Size: 80%
Centre Marker: Long
Aspect Blanking: Black
11
Easy Setup and Adjustment / Other Features
12
Easy Setup and Adjustment
Auto White Balance
The colour temperature and white balance of the BVM-L230 monitor can
be automatically adjusted by the
Auto White Balance function using the
specified colour temperature probes*,
such as the Konica Minolta CA-210,
DK-Technologies PM5639/06 and X-Rite
Eye-One Pro.
* Requires a connector to connect each of the
colour analysers.
Auto Chroma/Phase Adjustment
An Auto Chroma/Phase/Matrix setup
function is provided which automatically
adjusts the monitor’s chroma, phase
and matrix using external colour bars.
Colour Temperature Selection
The Colour Temperature can be selected from D65, D93, D61, D56, D-Cine*,
or User1 to User5. A “Colour Temp”
(Colour Temperature) button located on
the BKM-16R front panel enables instant
access to the “Colour Temp menu”
without using the On-Screen menu.
* D-Cine: x=0.314, y=0.351
Aspect Switch
The aspect ratio can be switched
between 4:3, 16:9, 2.39: 1, and 1.869:1
depending on the input signal.
4:3
16:9
16:9
2.39:1
2.39:1
1.869:1
Easy Setup and Adjustment / Other Features
Other Features
S-LOG GAMMA
VESA™ Mounting
(200 x 100 mm pitch)
> Blue Only
> Mono
> H Delay/V Delay
> NTSC Setup Level (0%, 7.5%)
> Component Level
(SMPTE/EBU-N10 or Betacam)
> Aperture
> Serial Remote (Ethernet)
> Parallel Remote (D-sub 9-pin)
> Tally Lamp (Amber)
> EXT Sync (for RGB/YUV)
>
>
5° Tilt Forward
10° Tilt Backward
13
Specifications
BVM-L230
565.5 (22 3/8)
226.4 (9)
436.4 (17 1/4)
Front
BVM-L230
270 (10 3/4)
460 (18 1/8)
Picture Performance
Approx. 483.8 x 302.4 mm (Approx. 19 1/8 x 12 inches)
570.6 mm (22 1/2 inches)
Aspect
16:10
Resolution (H x V)
1920 x 1200 pixels (WUXGA)
Pixel Efficiency
99.99%
Backlight
High-purity LEDs
Preset Brightness
100 cd/m2 (D-Cine: 48 cd/m2) (when 100% white signal is input)
Panel drive
RGB 10 bit
Panel frame rate
96/100/120 Hz
Viewing angle
85°/85°/85°/85° (typical) (up/down/left/right contrast > 10:1)
200 (7 7/8)
M4*
Rear
100 (4)
a-Si TFT Active Matrix LCD
Picture Size (Viewable Area)
(H x V) (Diagonal)
226.4 (9)
Input / Output
DVI-D (HDCP correspondence) x 1
Control
LAN
Parallel Remote
Option A
Option B
DC 5V Out
Ethernet (10 BASE-T/100 BASE-TX), RJ-45 x 1
D-sub 9-pin (female) x 1
Mini-DIN 8-pin (female) x 1
USB (Type A) x 1 (used for future expansion)
489.8 (19 3/8)
Bottom
4-M5
Circle 4-pin (female) x 1
General
Power Requirements
Power consumption
Operating Temperature
230 (9 1/8)
Four (4) slots
PC input
195 (7 3/4)
Video Input/Output
100 to 240 V AC, 2.0 to 0.9 A, 50/60 Hz
Approx. 180 W (at maximum load, the luminance compensation
due to the aged deterioration of the LED is included.)
0 °C to 35 °C (32 °F to 95 °F)
(Recommended operation temperature 20°C to 30°C (68°F to 86°F))
Operating Humidity
0% to 90% (no condensation)
Operating Pressure
700 hPa to 1060 hPa
Storage and Trans. Temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Storage and Trans. Humidity
0% to 90%
Storage and Trans. Pressure
700 hPa to 1060 hPa
Dimensions (W x H x D)
565.5 x 436.4 x 243.1 mm (22 3/8 x 17 1/4 x 9 5/8 inches)
Mass.
Approx. 22 kg (48 lb 8 oz)
Supplied Accessories
AC power cord (Parts number: 1-782-929-1x) (1), AC plug holder (1),
Cable holder (1), Bracket (1), Operation Manual (Japanese, English,
each 1), Connection Cable for Colour Temperature Probe (1), CDROM (1), Using the CD-ROM Manual (1)
BKM-16R
30 (1 3/16)
6-Ø8
30 (1 3/16)
Side
31 (1 1 /4 )
266 (10 1 /2 )
BKM-16R
Input / Output
10BASE-T/100BASE-TX connector: RJ-45 x 1
DC 5V/12V IN
Circle 4-pin (male) x 1
General
Power Requirements
DC IN: 5V, 1.1A (supplied by the connected monitor)
DC IN: 12V, 0.5A (supplied by the connectod AC adaptor)
AC adaptor: AC IN: 100 to 240 V, 50/60 Hz, DC OUT: 12V, 3A
Current Consumption
5V DC, 1.1 A/12 V DC, 0.5A
Power Consumption
Approx. 6 W
Operating Temperature
0 °C to 35°C (32 °F to 95 °F) (Recommended operating
temprature 20 °C to 30 °C (68°F to 86°F))
Operating Humidity
0 % to 90% (no condensation)
Operating Pressure
700 hPa to 1060 hPa
Storage and Trans. Temperature
-10 °C to + 40 °C (14°F to 104°F)
Storage and Trans. Humidity
0 % to 90 %
Storage and Trans. Pressure
700 hPa to 1060 hPa
Dimensions (W x H x D)
424 x 58.8 x 174.9 mm (16 3/4 x 2 3/8 x 7 inches)
Mass
Approx. 2.1 kg (4 lb 10 oz)
Supplied Accessories
AC adaptor (1),AC power cord (parts number: 1-575-131-8x (1), Rack
mount brackets (2), Rack mount attachment screws (4), Function
labels (2), Operation manual (1)
Front
Side
424 (16 3 / 4 )
51.5
90
(2 1 /8 ) (3 5 /8 )
44
(1 3 / 4 )
14.8
( 19 / 32 )
22 (7 /8 )
18 (23 /32 )
LAN
34.5 (1 3 /8 )
37
99.5
(1 1 /2 ) (4)
Bottom
5.3 (7 /32 )
156.5 (6 1 /4 )
14
Type
13.1 (17 /32 )
Unit : mm(inch)
4-M4*
Optional Accessories
BKM-16R
Monitor Control Unit
BKM-243HS
BKM-220D
HD-SDI/SD-SDI Input Adaptor
SD-SDI 4:2:2 Input Adaptor
BKM-229X
Analogue Component Adaptor
15
BKM-227W
BKM-37H
NTSC/PAL Input Adaptor
Controller Attachment Stand
BKM-220D
SMF-700
Monitor Interface Cable
BKM-243HS
Input / Output
Input / Output
BNC x 2, Digital Component Signals Sampling
Frequency: SD-SDI: Y/R-Y/B-Y: 13.5 MHz, HD-SDI:
Y/Pb/Pr: 74.25 MHz Quantization: 10 bits/sample
BNC x 1, Output signal amplitude: 800 mVp-p
± 10 % Output impedance: 75 Ω unbalanced
SD-SDI: 200 m (approx. 656 ft) max. (when using
5C-2V coaxial cables (Fujikura) or equivalent)
HD-SDI: 100 m (approx. 328 ft) max. (when using
5C-FB coaxial cables (Fujikura) or equivalent)
Serial Digital Interface
BNC x 2, Digital Component Signals
Sampling Frequency: Y/R-Y/B-Y: 13.5 MHz
Quantisation: 10 bits/sample
Serial Digital Interface
Monitor Out
BNC x 1, Output signal amplitude: 800 mVp-p ±10 %
Output impedance: 75 Ω unbalanced
Monitor Out
Transmission Distance
200 m (approx. 656 ft) max. (when using 5C-2V
coaxial cables (Fujikura) or equivalent)
Transmission Distance
Voltage
+5 V (supplied from the main unit)
General
Power Consumption
Approx. 1.5 W
Voltage
+3.3 V (supplied from the main unit)
Operating Temperature
0 °C to 35 °C (68 °F to 95 °F) (Recommended operation temperature 20 °C to 30 °C (68 °F to 86 °F))
Power Consumption
Operating Humidity
Operating Pressure
Approx. 2 W
0 °C to 35 °C (32 °F to 95 °F) (Recommended
operation temperature 20 °C to 30 °C (68 °F to 86 °F))
0 % to 90 % (no condensation)
700 hPa to 1060 hPa
Storage and Trans. Temperature
Storage and Trans. Humidity
Storage and Trans. Pressure
-10 °C to 40 °C (14 °F to 104 °F)
0 % to 90 %
700 hPa to 1060 hPa
Dimensions (W x H x D)
100 x 20 x 162 mm (4 x 13/16 x 6 1/2 inches)
Mass
Supplied Accessories
Approx. 250 g (9 oz)
Operating Instructions (1)
General
Operating Humidity
0 % to 90 % (no condensation)
Operating Pressure
700 hPa to 1060 hPa
Storage and Trans. Temperature
-10 °C to 40 °C (14 °F to 104 °F)
Storage and Trans. Humidity
0 % to 90 %
Storage and Trans. Pressure
700 hPa to 1060 hPa
Dimensions (W x H x D)
100 x 20 x 162 mm (4 x 13/16 x 6 1/2 inches)
Mass
Approx. 250 g (9 oz)
Supplied Accessories
Operating Instructions (1)
BKM-227W
Operating Temperature
BKM-229X
Input / Output
Input / Output
Composite Input
BNC x 1, 1 Vp-p ± 3 dB sync negative
Y/C Input
4-pin mini DIN x 1 Y: 1 Vp-p ± 3 dB sync negative
C: 0.286 Vp-p ± 3 dB (NTSC burst signal level), 0.3
Vp-p ± 3 dB (PAL burst signal level) (SECAM, PAL-M)
Monitor Out
BNC x 1, Loop-through, with 75 Ω automatic
termination 4-pin mini DIN x 1, Loop-through,
with 75 Ω automatic termination
General
BNC x 3
External Sync Input
RGB Input 0.7 Vp-p ± 3 dB
(Sync on Green, 0.3 Vp-p sync negative)
Component Input 0.7 Vp-p ± 3 dB
BNC x 1, 0.3 to 4 Vp-p ± bipolarity ternary
or negative polarity binary
4-pin mini DIN x 1, Loop-through,
with 75 Ω automatic termination
General
Voltage
+3.3 V (supplied from the main unit)
Voltage
+3.3 V, +5 V (supplied from the main unit)
Power Consumption
Approx. 1.8 W
Power Consumption
Approx. 4 W
Operating Temperature
0 °C to 35 °C (32 °F to 95 °F) (Recommended operation temperature 20°C to 30 °C (68 °F to 86 °F))
Operating Temperature
0 °C to 35 °C (32 °F to 95 °F) (Recommended operation temperature 20 °C to 30 °C (68 °F to 86 °F))
Operating Humidity
Operating Pressure
Storage and Trans. Temperature
0 % to 90 % (no condensation)
700 hPa to 1060 hPa
-10 °C to 40 °C (14 °F to 104 °F)
Operating Humidity
0 % to 90 % (no condensation)
Operating Pressure
700 hPa to 1060 hPa
Storage and Trans. Humidity
0 % to 90 %
Storage and Trans. Temperature
-10 °C to 40 °C (14 °F to 104 °F)
Storage and Trans. Pressure
700 hPa to 1060 hPa
Storage and Trans. Humidity
0 % to 90 %
Dimensions (W x H x D)
100 x 20 x 162 mm (4 x 13/16 x 6 1/2 inches)
Storage and Trans. Pressure
700 hPa to 1060 hPa
Mass
Approx. 240 g (8 oz)
Dimensions (W x H x D)
100 x 20 x 162 mm (4 x 13/16 x 6 1/2 inches)
Supplied Accessories
Operating Instructions (1)
Mass
Approx. 250 g (9 oz)
Supplied Accessories
Operating Instructions (1)
Sony Specialist Dealers receive extensive
training on all our products and services.
They combine this with an in-depth knowledge
of the market, ensuring you get advice that
meets your needs before and after purchase.
To find your nearest Sony Specialist Dealer
visit our “dealer locator” at:
www.sonybiz.net/dealer
Services from Sony: working with you, working for you.
Recognising that every company and every challenge is unique, we offer a complete and comprehensive range of services all the way through consulting, planning, financing, implementation,
training, servicing, maintenance and support. Choose exactly what’s right for you, when and where
you need it.
Sony Professional Services
Tailor-made design, installation and project management of audio-visual and IT (AV/IT) systems using
skills developed over 25 years of systems integration.
Sony Financial Services
Innovative and flexible finance solutions designed to meet budgetary and financial requirements
and constraints, enabling businesses to always have the most current technology.
Sony Training Services
A range of off-the-shelf or customised training services from basic operation through to high-level
technical maintenance.
Sony Support Services
Fully integrated and customised support for products and systems throughout their operational life,
combining proactive and reactive technical services.
Not all services are available in all countries. If you’d like to find out more about what we do, who we do it for and how we do it, visit
www.sonybiz.net or contact your local Sony office.
© 2007 Sony Corporation. All rights reserved. Reproduction in whole or in part without permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate. Images on monitors are simulated.
Sony, TRIMASTER, and Memory Stick are trademarks of Sony Corporation.
VESA is a trademark of the Video Electronics Standards Association.
All other trademarks are the property of their respective owners.
www.sonybiz.net/monitors
Download PDF

advertising