FS-Audio Titanium Compression Tweeter Driver 140

FS-Audio Titanium Compression Tweeter Driver 140
FS-Audio Titanium Compression Tweeter Driver 140 Watt Bolt Mount
This Fs-Audio titanium compression horn driver is ideal for replacing old drivers or upgrading to a higher end horn driver. This
compression driver is a small-medium format, high frequency driver that will deliver a crisp clean frequency response between 2kHz and
20kHz. The voice coil is a 34mm/ 1.4" titanium diaphragm with a 140watt power rating. Perfect for use with 2-way loudspeaker systems,
10" woofers, 12" woofers, 15" woofers, replacement of old drivers and custom cabinet builds.
• 12 months manufacturer's warranty
• 1 x Titanium compression driver
• Diaphragm: titanium
• Throat: 1" Diameter
• Ferrite horn driver
• Small-medium format
• High frequency
• Mounting: flush bolt up (M4 bolts, 75mm gap between bolt holes)
• Please note mounting may require drilling and modification to horn flare
• Replacement VC available
• RMS Power: 70 watts
• Impedance: 8 Ohm
• Frequency response: 2kHz-20KHz
• Sensitivity(1W/1M): 102dB
• Voice coil: 34mm/1.4" Titanium
• Magnet: 13 Oz
• Dimensions: 93 x 50mm (Dia x D)
• Weight: 0.87 kg
Reference #
FS Audio
12 months
Unit 8, 50 Raubers Road
Banyo QLD 4014
Mon, Wed & Fri ­ 8am­5pm; Tue & Thurs ­ 8am­6pm
Sat, Sun & Public Holidays ­ Closed
Call us on (07) 3423 3463
Email us orders & questions
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF