Draco Tera / Extender – Firmware

Draco Tera / Extender – Firmware
Draco Tera / Extender – Firmware
Release Notes
Changes Matrix FW
Date
Version
Change
2016-12-13
MATXCPU
V3.03
MATXIO8
V3.03
New Features and Enhancements:
 Full support of Draco tera 576/576S port matrix
 Support of redundant controller board for Draco tera
enterprise 48, 80 and 288
 Support of new extender series
 Expansion of Matrix Grid to 24 matrices
 Restart option for controller board
 Support of 32 user and CON macros
 Macro OSD list for executing macros
 User and CON ACL: AND/OR assignment
 Deactivation option of OSD at CON Units
 CRC32 checksum for API interface
 Multicast network communication
Improvements:
 Virtual CPU: Simultaneous assignment of one real
CPU to various virtual CPUs
 Accelerated update for controller boards and I/O
boards
 Update process of mismatched I/O boards
 SNMP: Expansion of MIB with extender data for 2nd
Link
 SNMP: Traps for macros added
 Initialization process for Matrix Grid
 Synchronization between Grid Master and Sub
matrices
 Handling of Matrix Grid connections
 Handling of I/O boards
 Performance of TCP/IP interface
 USB-HID communication to matrix
 Online Config mode activation via configuration
 Sequential switching option for macro commands
 User login macro in Matrix Grid
Fixed Bugs:
IHSE GmbH ▪ Maybachstraße 11 ▪ 88094 Oberteuringen ▪ Germany ▪ info@ihse.de ▪ www.ihse.com
phone: +49 (7546) 9248-0 ▪ fax: +49 (7546) 92484-48 ▪ District court: Freiburg HRB 580617 ▪ Managing Director: Dr. Enno Littmann
page 2 of 11








2016-03-29
MATXCPU
V3.01
Cat X phyter: Initialization of extenders on I/O board
Temperature status for Draco tera 288 and 576
Fix Frame option in Multi-Screen Control
Fix port handling for USB 2.0 extenders
Local computer switching of 481 series
Connection handling of previous switching
OSD communication to extender
User login in Matrix Grid
New Features and Enhancements:
 Full support of redundant extenders in a single matrix
or Matrix Grid
 Single extender switching in multi-extender Device
 2nd SNMP server configuration
 2nd Syslog server configuration
 Basic LDAP support
 Change of OSD data (color, name, about) upon
request
 Echo function for media controllers in Matrix Grid
operation
 Support of various new extender types
 Support of Russian keyboard layout in OSD
 New type of macros based on prior login
 Status request of redundancy via API
 Support of Matrix Grid card
 Extension of SNMP monitoring for Draco tera 576
 Extension of SNMP monitoring for redundant extender
link
Improvements:
 Handling of OSD data during restart
 Modification and management of FPGA design for
CPU and I/O boards
 Handling of Grid master in Matrix Grid
 Accelerated status request in Matrix Grid
 Grid Line information in Matrix Grid
 Expansion of trace/syslog for LAN related messages
 Time stamp of trace/syslog messages
 Operation in Multi-Screen Control
 Video Only switching in Port Mode
 Temperature monitoring Draco tera enterprise 288
 Handling of CPU Scanner function
 Increase of buffer size in the TCP/IP stack
IHSE GmbH ▪ Maybachstraße 11 ▪ 88094 Oberteuringen ▪ Germany ▪ info@ihse.de ▪ www.ihse.com
phone: +49 (7546) 9248-0 ▪ fax: +49 (7546) 92484-48 ▪ District court: Freiburg HRB 580617 ▪ Managing Director: Dr. Enno Littmann
page 3 of 11






Extender requests by matrix
Update process of I/O boards
Macro switching via SNMP traps
Expansion of OSD data port number
Firmware status view
Communication between CPU board and Cat X
phyters on I/O board
 Cat X phyter and SFP control and error handling
 Registration process of newly connected extenders
 Fan and temperature control
 Startup sequence of I/O board
 Handling of matrix grid communication
 Block transfers for internal and external matrix
communication established
 Establishment of network socket connections
Fixed Bugs:
 Restart / shutdown of I/O boards
 Update of I/O boards
 Handling of Matrix Grid communication
 Interaction with debug interface
 Configuration management upon restart
 OSD layout
 OSD list cursor
 Incorrect extender data of VCONs and VCPUs in OSD
 LDAP login
 SNMP
 Draco tera 288 temperature management
 Handling of extender port information
 Status request for extender ports
 Configuration of Cat X phyters during I/O board startup
sequence
 Temperature traps
 Local CPU switching of non-redundant HDMI CONs
2015-01-28
MATXCPU
V3.00
New Features and Enhancements:
 Synchronized switching for operations consisting of
multiple commands (e.g. macros)
 Switching commands for port related switching in Full
Access and Video Only mode
 CPU connection info upon keyboard/mouse event in
Video only or KVM sharing mode
 Support of various new extenders types
 Update of DVI-I CON Units (EXTICON)
IHSE GmbH ▪ Maybachstraße 11 ▪ 88094 Oberteuringen ▪ Germany ▪ info@ihse.de ▪ www.ihse.com
phone: +49 (7546) 9248-0 ▪ fax: +49 (7546) 92484-48 ▪ District court: Freiburg HRB 580617 ▪ Managing Director: Dr. Enno Littmann
page 4 of 11
 New video mode 1680x1050 in OSD
Improvements:
 Master handling in Matrix Grid
 Port handling of fixed port extenders (e.g. USB 2.0)
 Update of redundant extenders
 Update of KVM switching status for extenders on I/O
board
 CPU connection info on redundant extenders
 Handling of OSD in Multi-Screen Control environment
 Time monitoring for LAN module
 Handling of LAN sockets
 Handling of matrix flash data
Fixed Bugs:
 Synchronisation of system data in Matrix Grid
 Handling of admin user in Matrix Grid
 OID definition corrected (SNMP)
 API handling of invalid CPU Devices
 CPU selection in OSD
 Auto logout
 FIX Frame on second link (redundant extenders)
 Search focus in CPU Selection List
 KVM sharing in cascaded environment
2014-07-02
MATXCPU
V3.00
New Features and Enhancements:
 Automatic restart of replacement CPU board activating
previous network settings
 <F6> key status and sort mode for CPU selection list
are saved
 Default Device IDs set to 1001, 2001, 3001 and 4001
 Support of X-Key Stick (16 keys) to activate macros on
the matrix
Improvements:
 Local KVM switching
 Switching of USB 2.0 extenders
 Multi-Screen Control switching
 Update time for standard extender update reduced
 Release timer for Mouse/Keyboard Connect
 Management of Matrix Grid configurations
 Connection handling for switching in Matrix Grid
IHSE GmbH ▪ Maybachstraße 11 ▪ 88094 Oberteuringen ▪ Germany ▪ info@ihse.de ▪ www.ihse.com
phone: +49 (7546) 9248-0 ▪ fax: +49 (7546) 92484-48 ▪ District court: Freiburg HRB 580617 ▪ Managing Director: Dr. Enno Littmann
page 5 of 11
 Handling of status requests
 Date and time stamp of Syslog messages
 Echo function adjusted to socket management
 Operation of network stack (VRRP)
Fixed Bugs:
 Restart process of Matrix Grid
 Identification of extenders during restart
 Switching of CON IDs via API
 Handling of broadcast messages (network)
2016-06-09
2016-10-17
2016-07-06
MATXVOSD Improvements:
V3.24
 Accelerated update
MATXOSL
Fixed Bugs:
V3.12
 XV grid line communication
MATXVOSL
 Video only switching in Draco tera compact matrices
V3.05
2015-04-17
2015-04-17
2014-06-24
2015-10-15
MATXOSD
New Features and Enhancements:
V3.08
 Support of Russian OSD
MATXVOSD Improvements:
V3.23
 Update of redundant extenders
MATXOSL
Fixed Bugs:
V3.10
MATXVOSL  Downgrade option
V3.05
2014-06-11
2014-07-07
MATXOSD
MATXOSL
V3.04
New Features:
 Support of Draco vario repeaters
Improvements:
 Multi-Screen Control
IHSE GmbH ▪ Maybachstraße 11 ▪ 88094 Oberteuringen ▪ Germany ▪ info@ihse.de ▪ www.ihse.com
phone: +49 (7546) 9248-0 ▪ fax: +49 (7546) 92484-48 ▪ District court: Freiburg HRB 580617 ▪ Managing Director: Dr. Enno Littmann
page 6 of 11
Changes Extender FW
Date
Version
Change
2016-10-31 CON Units
2016-05-30
2016-05-30
2016-05-30
2016-06-28
2016-05-30
2016-05-30
2016-08-11
2016-05-30
2016-08-11
2016-05-30
2016-05-31
2016-05-31
2016-04-11
2016-04-11
2016-08-25
EXTCON
EXTICON
EXTRCON
EXTHRCON
EXTDLCON
EXTDPCON
EXVDPCON
ECTDPCON
ECVDPCON
EXTVCON
EXTHVCON
EXVDLCON
FZVDLCON
FZVDPCON
EXTOPS
V3.09
V1.12
V2.12
V1.22
V1.51
V1.08
V1.15
V1.08
V1.15
V3.18
V1.02
V1.10
V1.00
V1.00
V1.00
2015-10-31 CPU Units
2016-07-14
2016-07-14
2016-06-14
2016-05-30
2016-06-06
2016-05-30
2016-08-11
2016-05-30
2016-08-11
EXTCPU
EXTICPU
EXTRCPU
EXTHRCPU
EXTDLCPU
EXTDPCPU
EXVDPCPU
ECTDPCPU
ECVDPCPU
V2.47
V1.28
V1.39
V1.14
V1.53
V1.07
V1.15
V1.07
V1.15
New Features and Enhancements:
 Switching on Dual-Head CPUs (EXTVCON)
 <Hotkey><r><h><Enter> for HID hardware reset
 <Hotkey><r><s><Enter> for HID software reset
 Various new audio codes for 483 series
 LOS timer in Config.txt (ENALOSTMR)
 Microphone preamplification in Config.txt (GAIN=X) for
extenders with balanced audio transmitter module
 OPS Extender
Improvements:
 VGA signal per default (EXTICON)
 USB 2.0 embedded connection in Video Only mode
 Detection Dual-Head/Dual-Link (EXTDLCON)
 Support of 3440 x 1440 resolution
 Dithering filter ENADITHER (EXTCPU, EXTRCPU,
EXTVCPU)
 Audio support in Video Only mode
 Bidirectional support of balanced audio upgrade
module
 Automatic cutting of EDID extension block (EXTCPU,
EXCTRCPU, EXTVCPU)
 Update improved
Fixed Bugs:
 Service Mode via backplane
 EDID transmission of redundant extenders
 USB 1.1 support of USB 2.0 embedded upgrade
modules
New Features and Enhancements:
 <Hotkey><R><H><Enter> for hardware reset and
<Hotkey><R><S><Enter> for software reset
 Support of USB-HID Ghosting and EDID management
through the matrix
 Microphone preamplification in Config.txt (GAIN=X) for
extenders with balanced audio transmitter module
Improvements:
IHSE GmbH ▪ Maybachstraße 11 ▪ 88094 Oberteuringen ▪ Germany ▪ info@ihse.de ▪ www.ihse.com
phone: +49 (7546) 9248-0 ▪ fax: +49 (7546) 92484-48 ▪ District court: Freiburg HRB 580617 ▪ Managing Director: Dr. Enno Littmann
page 7 of 11
2016-06-08
2016-05-31
2016-05-31
2016-08-02
2016-04-11
EXTVCPU
EXTHVCPU
EXVDLCPU
EXVICPU
FZVDLCPU
FZVDPCPU
V3.11
V1.02
V1.09
V0.92
V1.00
V1.00
 Audio signal on both links available
(redundant extenders)
 USB 2.0 embedded connection in Video-Only mode
 Compression control (EXTVCPU)
 Timing for memory control (EXTDLCPU)
 Detection Dual-Head/Dual-Link (EXTDLCPU)
 Support of 3440 x 1440 resolution
 Bidirectional support of balanced audio upgrade
module
 Update improved
Fixed Bugs:
 Parameter RELEASETIME=X
 Link communication
 RAM timing (EXTICPU)
 Switching of redundant extenders
 EDID transmission of redundant extenders
 Audio transmission on HDMI (EXTHRCPU)
 Color defect in right half of the screen
2014-06-12 EXTCON
Improvements:
V3.00
 USB 2.0 embedded connections supported in Multi2014-06-11 EXTHRCON
Screen Control mode
V1.10
 Compatibility with Dual-Head CPU extenders (482
EXTRCON
series)
2014-06-12
V1.30
2014-02-04 EXTCPU
V2.38
2014-02-05 EXTCON
V2.34
New Features and Enhancements:
 Support for extender SNMP function implemented
 CENTERMODE parameter supports embedding
Single-Link resolutions into a Dual-Link output
 USB 2.0 embedded supported in Multi-Screen Control
mode
 Update of converter firmware (CONVGPU) for DVI-I
CPU Units included
 Update process for Dual-Link/Dual-Head extenders in
standard mode included
Improvements:
 OSD communication between the KVM matrix and
extenders improved
 USB-HID switching of redundant CPU units available
per default (CONFIG.txt)
IHSE GmbH ▪ Maybachstraße 11 ▪ 88094 Oberteuringen ▪ Germany ▪ info@ihse.de ▪ www.ihse.com
phone: +49 (7546) 9248-0 ▪ fax: +49 (7546) 92484-48 ▪ District court: Freiburg HRB 580617 ▪ Managing Director: Dr. Enno Littmann
page 8 of 11
 Local CPU switching for Multi-Head Devices supported
Fixed Bugs:
 LOS frame of Cat X extenders corrected
 Video generation for customized industrial displays
corrected
2016-01-29 EXTMSD
V2.38
2016-01-29 EXTIMSD
V1.22
EXTDLMSD
2016-05-03
V1.27
New Features and Enhancements:
 New DISPLAY2 parameter selects second video
channel of 482 Dual-Head CPU unit
 Deletion of Config.txt recovers factory settings
 Versioning of Config.txt file
Improvements:
 Manual extender update from Windows 8 computers
 Differentiation of EDIDs (482 series only)
Fixed Bugs:
 Digital audio parameters for redundant CPUs
 USB 1.1 support of USB 2.0 embedded upgrade
modules
2013-06-11 EXTMSD
EXTIMSD
V2.29
New Features and Enhancements:
 New EDID with 1080p default for DVI and HDMI
 New EDID supports 2-ch PCM audio for HDMI
 Parameters “1080p50Hz” and “PRIVATEACCESS”
added
 Parameters for shared access to redundant CPU unit
added
 EXTIMSD file required for DVI-I CPU units only
IHSE GmbH ▪ Maybachstraße 11 ▪ 88094 Oberteuringen ▪ Germany ▪ info@ihse.de ▪ www.ihse.com
phone: +49 (7546) 9248-0 ▪ fax: +49 (7546) 92484-48 ▪ District court: Freiburg HRB 580617 ▪ Managing Director: Dr. Enno Littmann
page 9 of 11
Changes HID FW
2016-02-16 HIDCPU
HIDCON
V4.01
New Features and Enhancements:
 <Hotkey><R><H><Enter> for hardware reset and
<Hotkey><R><S><Enter> for software reset
 Port deactivation in Multi-Screen Control (U-Switch)
 Support of Logitech K400 keyboard
 Support of Logitech MK220 keyboard/mouse
 Support of various touch screens for KVM sharing
 Expanding of favourites in port mode to 254
 Support of Raspberry Pi
 Support of 32 macros in a matrix
 Freely configurable Multi-Screen Control (U-Switch)
 Support of new X-key generation
Improvements:
 Multi-Screen Control with identical mice
 Support of Logitech Unifying Receiver
 Key buffer timeout
 Wake up of computers from sleep mode
 Boot process of U-Switch
 Handling of multi interface devices
 Acceleration in Multi-Screen-Control
 Change of polling interval
 Handling of multi-interface keyboards
 Control of keyboard LEDs
 Fixed assignment of K/M to dedicated hub ports
 Support of horizontal scrolling of Apple mice in USBHID-Ghosting
 Secure transmission of data packages
 Pointer handling in Red Hat and CentOS
 Handling of hubs for 3rd party USB switch
 Support of keyboards with mouse interface
 Support of EloTouch screens for shared control
Fixed Bugs:
 Switching of U-Switch
 Operation of Multi-Screen Control
 Port arrangement in Multi-Screen Control (U-Switch)
 Deactivation of ports (U-Switch)
 Start of recovery console of mac computers
IHSE GmbH ▪ Maybachstraße 11 ▪ 88094 Oberteuringen ▪ Germany ▪ info@ihse.de ▪ www.ihse.com
phone: +49 (7546) 9248-0 ▪ fax: +49 (7546) 92484-48 ▪ District court: Freiburg HRB 580617 ▪ Managing Director: Dr. Enno Littmann
page 10 of
11
 Handling of absolute mouse reports
 Converter OSD shut down
 OSD control in cascaded environment
 Mouse handling as a combined device
 U-Switch arrangement 2x4 in Multi-Screen Control
corrected
2014-06-26 HIDCPU
HIDCON
V3.02
New Features and Enhancements:
 <Hotkey><d><1> and <Hotkey><d><2> select
respective video channel of 482 Dual-Head CPU unit
 Support of X-Key Stick (16 keys) to activate macros on
the matrix
 Support of Yokogawa keyboard
 4x1 vertical mode for Multi-Screen Control
Improvements:
 Remote wake up
 Switching of U-Switch
 Operation of Multi-Screen Control
Fixed Bugs:
 Reports of USB-HID Ghosting corrected
IHSE GmbH ▪ Maybachstraße 11 ▪ 88094 Oberteuringen ▪ Germany ▪ info@ihse.de ▪ www.ihse.com
phone: +49 (7546) 9248-0 ▪ fax: +49 (7546) 92484-48 ▪ District court: Freiburg HRB 580617 ▪ Managing Director: Dr. Enno Littmann
page 11 of
11
Changes Converter FW
2016-07-14 CONVGPU New Features and Enhancements:
V1.40
 New resolutions for SDI (1080p@24/25/30Hz)
 EDID change via keyboard command (VGA vs. DVI)
<Hotkey><V><G> (VGA) or <Hotkey><V><D> (DVI)
Improvements:
 EDID transmission
 Scaling
Fixed Bugs:
 RAM timing
 Saving of image settings
 Minor bug fixes
2014-06-06 CONVGPU Improvements:
2014-03-14 CONVPGA  Updates for CONVGPU via Draco tera
2014-03-14 CONVMSD Fixed Bugs:
V1.32
 Minor bug fixes
IHSE GmbH ▪ Maybachstraße 11 ▪ 88094 Oberteuringen ▪ Germany ▪ info@ihse.de ▪ www.ihse.com
phone: +49 (7546) 9248-0 ▪ fax: +49 (7546) 92484-48 ▪ District court: Freiburg HRB 580617 ▪ Managing Director: Dr. Enno Littmann
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising