2-591-809-14 (1)
1
1
Digital Still Camera
2
Prepare the battery pack
1
Insert the battery pack.
Select
2
.
Push the back part of the battery pack gently until it clicks into place.
3
Read This First
Battery charger
To wall outlet
(wall socket)
Lighting
2
CHARGE lamp
Light on: Charging
Light off: Completed (Practical charge)
3
Connect the power
cord (mains lead).
Clock Set
Full charging time (Practical charging time)
NP-FE1 (supplied)
Approx. 170 min. (Approx. 110 min.)
12 : 00
OK
AM
Cancel
1 Select the date display format with v/V, then press
z.
Clock Set
Y/M/D
M/D/Y
D/M/Y
2005 / 1 /
• Connect the battery charger to an easily accessible wall outlet (wall socket) close by.
• Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the
battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and
remove the battery pack from the battery charger.
“InfoLITHIUM“ battery pack
1
Set the clock with the control
button.
If you continue charging the battery pack for about one
more hour (until it is fully charged), the charge will last
slightly longer.
DSC-T7
Terminal side
Y/M/D
M/D/Y
D/M/Y
Power cord
(mains lead)
Before operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate
volume) thoroughly, and retain it for future reference.
Insert a “Memory Stick Duo”
Slide the lens cover or
(power).
press
2005 / 1 /
Operating Instructions
3
Turn the camera on/set the clock
1
12 : 00
Insert the “Memory Stick Duo” all
the way in until it clicks.
4
1
Select the image size for use
Select a mode.
Still image:
OK
AM
Cancel
Select
2 Select each item with b/B and set the numeric value
with v/V, then press z.
Y/M/D
M/D/Y
D/M/Y
Insert the charged battery pack.
1
3:2
3M
1M
Select
• The screen above is for still images.
For movies, select [640(Fine)] (“Memory Stick PRO
Duo” only), [640(Standard)] or [160].
.
OK
AM
Cancel
4
Y/M/D
M/D/Y
D/M/Y
2005 / 1 /
1
10 : 30
OK
AM
Cancel
button
• To cancel, select [Cancel] and press z.
2591809140
Checking the accessories supplied
• Battery charger BC-CS3 (1)
• USB cable (1)
• Stand (1)
Insert the battery pack while
pressing the battery eject lever
with the tip of the battery.
To change the date and time
On still image sizes
You can connect the camera using the AC-LS5/AC-LS5K AC Adaptor (not supplied). t
“User’s Guide/Troubleshooting” (page 15). Refer to the operating instructions supplied with the
AC Adaptor.
Select [Clock Set] in the
For details on the image size t “User’s Guide/Troubleshooting” (page 13)
t “User’s Guide/Troubleshooting” (page 53)
To check the remaining battery time
(power) to turn on and check the time on the LCD screen.
Remaining indicator
60min
• A/V cable (1)
Close the cover.
Using the AC Adaptor
Press
• Power cord (mains lead) (1)
• It takes about one minute until the correct battery remaining
time appears.
• The displayed time remaining may not be correct under certain
circumstances.
Remaining time
• “Memory Stick Duo”
(32 MB) (1)
(Setup) screen and perform the procedure in step 3 above.
Image size
Guidelines
On the clock display
5M (2592×1944)
(Default setting)
For printing high density images in A4 or
A5 size
• If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle.
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
3:2* (2592×1728)
When turning on the power
1M (1280×960)
For printing in postcard size
• Unless you set the clock, the Clock Set screen appears each time the camera is turned on.
• The following screen appears when the camera is turned on for the second time or afterwards.
VGA(E-Mail)
(640×480)
For recording a larger number of images
For attaching images to e-mail or creating
home pages
60min
• Neck strap (1)
• Memory Stick Duo Adaptor
(1)
• CD-ROM (Cyber-shot
application software) (1)
Notes before use
• Charge the supplied NP-FE1 battery pack before using the camera for the first time.
• The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to
apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc.
Hook
More
Rough
3M (2048×1536)
When opening the lens cover
For details on recordable number or time t “User’s Guide/Troubleshooting” (page 22)
Still images
Maximum recordable image
Movies
Maximum recordable time
Battery eject lever
• Operating instructions for
digital still camera “Read
This First” (this manual) (1)
• Operating instructions
“User’s Guide/
Troubleshooting” (1)
Fine
Recordable number of still images and recordable time of movies vary depending on the image
size selected.
• When opening the lens cover, be careful not to touch the lens.
• Interface Adaptor (1)
Printing
Less
On recordable number of still images and recordable time of movies
Open the battery cover and slide the battery eject lever in the direction of the arrow. Place your
finger on the flange and push the battery pack out. To avoid dropping the battery pack, do not
hold the camera with the battery slot facing down when the battery eject lever is out.
• If you open the lens cover too quickly, the camera might not turn on. If this happens,
close the cover and then open it again more slowly.
• Battery case (1)
No. of images
* Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards etc.
To remove the battery pack
• Rechargeable battery pack
NP-FE1 (1)
Press
(Image Size) to
complete the setting.
Clock Set
Explains advanced techniques and what to do if you experience trouble with
your camera.
© 2005 Sony Corporation Printed in Japan
1M
VGA(E-Mail)
Image Size
12 : 00
Battery eject
lever
Printed on 100% recycled paper using VOC
(Volatile Organic Compound)-free vegetable
oil based ink.
Select the size with v / V.
(Image Size).
5M
3 Select [OK] with B, then press z.
Open the cover.
3
.
Clock Set
2005 / 1 /
4
Press
Movie:
• Time required to charge fully depleted battery pack at a temperature of 25°C (77°F). Charging may take
longer under certain circumstances or conditions.
Refer to “User’s Guide/Troubleshooting”
(separate volume)
2
To use your camera abroad — Power sources
You can use your camera, the supplied battery charger, and the AC-LS5/AC-LS5K AC Adaptor
(not supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/
60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design
of the wall outlet (wall socket) [b].
BC-CS3
• Do not use an electronic transformer (travel converter), as
this may cause a malfunction.
To turn off the power
Slide the lens cover or press
• Number of recordable images and time can differ according to shooting conditions.
again.
• If the camera is running on battery power and you do not operate the camera for a period of time, the camera
turns off automatically to prevent wearing down the battery (Auto power-off function).
To remove a “Memory Stick Duo”
Open the cover, then push the “Memory Stick Duo” in once.
• If the access lamp is lit, never remove the “Memory Stick Duo” or
turn off the power. The data may be corrupted.
Changing the language setting
You can change the screen display to show messages in a specified language. To change the
language setting, press MENU to display the menu screen. Select
(Setup) with the control
button, then, select [ A Language] in
(Setup1), and select the desired language. t “User’s
1
Guide/Troubleshooting” (page 51)
Access lamp
Additional information on this product and answers to frequently asked questions can be
found at our Customer Support Website.
http://www.sony.net/
continued on the reverse
5
Shoot images easily (Auto adjustment mode)
Holding the camera
1
2
Select a mode.
1
Shoot with the shutter button.
Select
2
.
AE/AF lock indicator
Flashing t lit/beeps
Press and hold
halfway down to
focus
.
3
BACK/NEXT
2005 1 1 10:30PM
VOLUME
Still image: the image size is displayed
Movie:
is displayed
Movie:
Program
Auto
Camera
Position the subject in the center of the focus
frame.
To play back a movie, press z.
WB
60min
ISO
STD
B
640
10/10
00:00:03
Movie:
Press fully down
• For details on modes, see below.
• The setting is maintained even when the power is
turned off.
60min
MENU button
REC
Control button
Zoom lever
4
Control button
5
To stop recording, press the shutter button fully down again.
Using the zoom
Using the flash for
still images
3/9
Zoom lever
Hold the camera with your
thumb on the strap hook
96
VGA
101-0003
Select
(Camera) with b,
then select a mode with v/V.
AF range finder frame
VGA
Select an image with b/B.
Mode
.
Using the control button
2
.
Program
Auto
Camera
Press fully down
The shutter sounds.
Movie:
60min
Select
60min
60min
Select
1
Press MENU.
View/delete images
Still image:
Still image (auto adjustment
mode):
Select
6
Shoot still images (Scene Selection)
Zoom lever
60min
101_0010
STOP
Press MENU to turn off the
menu.
Shoot with the shutter
button.
Playback bar
2005 1 1 10:30PM
REV/CUE
VOLUME
Rewind/Fast forward: b/B
(Return to normal playback: z)
Volume: v/V
Stop playback: z
button
Control button
• Movies with the image size [160] are displayed a size
smaller.
To cancel the Scene Selection
To delete images
Select [Auto] or [Program] with v/V.
1 Display the image you want to delete and press
(delete).
2 Select [Delete] with v, then press z.
60min
S AF
60min
Checking the last
image you shot
(Quick Review)
VGA
Review
101-0029
60min
8/8
2005 1 1 10:30PM
VGA
60min
96
Shooting close-up
(Macro)
S AF
RETURN
60min
VGA
96
Using the
self-timer
To cancel the deletion
• You cannot change the zoom scale while shooting a movie.
• When the zoom scale exceeds 3×, the camera uses [Digital Zoom].
For details on the [Digital Zoom] settings and the image quality t “User’s Guide/Troubleshooting”
(page 45)
Select [Exit], then press z.
Delete
Exit
BACK/NEXT
S AF
Checking the last still image you shot (Quick Review)
Press b (
) on the control button.
To cancel, press b again.
• The image may appear rough right after playback starts.
• To delete the image, press
(Delete) and select [Delete] with v on the control button, then press z.
Selecting a flash mode for still images
Using the self-timer
Before step 2, press V (
Scene Selection modes
) on the control button.
The following modes are predetermined to match the scene conditions.
Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates
(approximately 10 seconds later).
Strobes if it is dark (default setting)
Forced flash
SL
• Using a tripod is recommended.
If you shoot a still image of a subject that is difficult to focus on
Slow synchro (Forced flash)
The shutter speed is slow in a dark place to clearly shoot the background
that is out of flash light.
• If the subject is closer than approx. 50 cm (19 3/4 inches), use the Macro mode (left column).
• When the camera cannot focus on the subject automatically, the AE/AF lock indicator changes to flashing
slowly and the beep does not sound. Recompose the shot and focus again.
Subjects difficult to focus on are:
No flash
• Shooting distance (when [ISO] is set to [Auto])
W side: Approx. 0.1 to 2.6 m (3 15/16 to 8 feet 6 3/8 inches)
T side: Approx. 0.5 to 2.1 m (1 feet 7 11/16 to 6 feet 10 11/16 inches)
• The flash strobes twice. The first time is to adjust the light quantity.
Shooting close-up (Macro)
Before step 2, press B (
) on the control button.
To cancel, press B again.
• Setting the zoom all the way to the W side is recommended.
• The in-focus range becomes narrow, and the complete subject may not entirely be in focus.
• The AF speed drops.
• To shoot at even closer distances than close-ups (Macro) recording, use
(Magnifying glass mode) in the
Scene mode.
Shortest shooting distance from the lens surface
Setting all the way to the W side: Approx. 8 cm (3 1/4 inches)
Setting all the way to the T side: Approx. 25 cm (9 7/8 inches)
Magnifying glass
The subject appears on the LCD
screen magnified by up to 3.5×.
Self-timer lamp
Before step 2, press v ( ) on the control button repeatedly until the desired mode is selected.
No indicator
To view an enlarged image (playback zoom)
– Distant from the camera and dark
– The contrast between the subject and its
background is poor.
– Seen through glass
– Moving fast
To identify items on the screen
t “User’s Guide/Troubleshooting” (page 17)
– Reflect light or have a lustrous finish
– Flashing
– Against light
Distance to the subject
1 cm (13/32 inch)
2 cm (13/16 inch)
5 cm (2 inches)
10 cm (4 inches)
20 cm (7 7/8 inches)
Magnification scale
3.5×
2.2×
1.1×
0.5×
0.3×
• The focal distance to a subject is approx. 1 cm to
20 cm (13/32 inch to 7 7/8 inches).
• The optical zoom is locked to the W side and
cannot be used.
• When you slide the zoom lever, the image is
enlarged using the digital zoom.
1.1
Soft snap
Shoots portraits of people,
flowers, etc., with a gentle
atmosphere.
Shoots night scenes at a distance
without losing the dark
atmosphere of the surroundings.
Twilight portrait*
Shoots portraits in dark places.
while displaying a still image.
To undo the zoom, slide the zoom lever toward
.
Adjust the portion: v/V/b/B
Cancel playback zoom: z
To store enlarged images: [Trimming] t “User’s Guide/Troubleshooting” (page 43)
Landscape
Shoots landscapes, etc., by
focusing on a distant subject.
High-speed shutter
Viewing an index screen
Slide the zoom lever toward
(index) and select an image with v/V/b/B.
To return to the single-image screen, press z. To display the next (previous) index screen, press
b/B.
Shoots moving subjects outdoors
or in other bright places.
Beach
Shoots seasides or lakesides, the
blue of the water clearly recorded.
Snow
Twilight*
Slide the zoom lever toward
Shoots whitish scenes brightly.
Fireworks*
60min
• SINGLE DISPLAY
To use the functions set by the control button with Scene Selection
Before shooting in step 5, select the settings with the control button. Some functions are not
available, depending on the Scene Selection mode. When you press the button to select functions
that cannot be combined with Scene Selection, a beep sounds. t “User’s Guide/
Troubleshooting” (page 25)
2005 1 1 10:30PM
VOLUME
To delete images in index mode
1 While an index screen is displayed, press
control button, then press z.
(Delete) and select [Select] with v/V on the
2 Select the image you want to delete with v/V/b/B, then press z to display the
indicator on the selected image.
(Delete)
To cancel a selection
Select an image you have previously selected for deletion, then
indicator from the image.
press z to delete the
SELECT
Candle*
* The shutter speed becomes slower, so using a tripod is recommended.
BACK/NEXT
3/ 9
If you slide again, the sixteen-image
index screen appears.
Fireworks are recorded in all their
splendor.
Shoot candlelit scenes, without
spoiling the atmosphere.
101-0003
• SINGLE DISPLAY
VGA
3 Press
TO NEXT
(Delete).
4 Select [OK] with B, then press z.
• To delete all the images in the folder, select [All In This Folder] with v/V in step 1 instead of [Select], then
press z.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising