WirelessHART infrastructure components Gateway, power supply

WirelessHART infrastructure components Gateway, power supply
Data Sheet DS/WirelessHART/COMPONENTS-EN
WirelessHART infrastructure components
Gateway, power supply and accessories
Measurement made easy
Change from one to two columns
WirelessHART infrastructure components
Gateway, power supply and accessories
Specifications
Power supply for Gateway
WirelessHART gateway
G11950
Fig. 2:
Power supply
Power supply for gateway
Features
Open‑circuit, overload and continuous short‑
circuit proof
Low power dissipation and low heating
Integrated input fuse
High efficiency of typ. 89 %
G11949
Fig. 1:
Input
110 ... 240 V AC
Output
24 V DC, constant controlled output voltage
WirelessHART gateway
MODBUS WirelessHART gateway
Features
(85 ... 264 V AC, 100 ... 350 V DC)
Mounting
Graphical network analysis
Simple and automatic configuration options
Order number
HART and MODBUS protocol via both interfaces
Configuration via DTM or DD and webserver
Input
Omnidirectional dipole antenna, removable
External Bus
Interface 1:
WirelessHART
Ethernet, 10 BASE-T/100 BASE-TX, full galvanic
isolation
Protocols: HART UDP, MODBUS TCP
Interface 2:
RS485
Protocols: HART, MODBUS RTU
Power supply
20 … 30 V DC SELV/PELV, <5 W
Cable gland
Brass cable gland, nickel-plated
Redundant power supply connections
Explosion protection
IP rating
II 3 G Ex nA nC IIC T4 Gc
IP66 / IP67
Installation
Panel mounting
Order number
3KDE998517L0001
DIN rail mounting (TH 35‑15 or TH 35‑7.5
according to IEC/EN 60715)
2 DS/WirelessHART/COMPONENTS-EN | WirelessHART infrastructure components
3KDE998504L0001
Accessories
Coaxial cable
Antenna for gateway
G11952
G11951
Fig. 3:
Fig. 5:
Antenna
Antenna
Coaxial cable
Coaxial cable 1 m or 2 m
Type
Replacement antenna for WirelessHART gateway
Type
Coaxial cable, double shielded
with 2.0 dBi antenna gain
Connection
N plug to N plug
Connection
TNC plug
Order number
Length 1 m: 3KDE998544L0001
Order number
3KDE998517L0002
Length 2 m: 3KDE998544L0002
Surge protection for gateway
Connecting adapters
1
2
3
G11953
Fig. 4:
G11954
Surge protection
Fig. 6:
Surge protection
Adapters
Pos.
Type
Order number
Type
λ/4 surge protection according IEC 61643-21
1
N socket to TNC socket
3KDE998536L0006
Connection
N socket to N socket
2
N socket to N socket
3KDE998536L0007
Order number
3KDE998535L0001
3
TNC plug to N socket
3KDE998536L0005
Change from two to one column
Connection example
Standard
Adapter 1
Antenna 2 dBi
Coaxial cable
Adapter 2 or
surge protector
Coaxial cable
Adapter 3
WirelessHART
Gateway
G11954
Fig. 7:
Connection diagram (example)
WirelessHART infrastructure components | DS/WirelessHART/COMPONENTS-EN
3
ABB Automation Products GmbH
Process Automation
Schillerstr. 72
32425 Minden
Germany
Tel:
+49 571 830-0
Fax:
+49 571 830-1806
www.abb.com/fieldbus
Note
We reserve the right to make technical changes
and changes affecting content to this document at
any time without prior notice.
Orders are subject to the agreed detailed terms
and conditions. ABB cannot be held responsible for
any errors or omissions in this document.
We reserve all rights to this document and its
content, including images. This document must not
be copied, shared with third parties, or its content
(in whole or in part) used without the prior written
permission of ABB.
Copyright© 2015 ABB
All rights reserved
DS/WirelessHART/COMPONENTS-EN 08.2015
Contact us
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement