españa - American Standard

españa - American Standard
ESPAÑA™
SINGLE CONTROL LAVATORY FAUCET
MODEL NUMBER:
7164CASF Lavatory Faucet
Speed Connect ® pre-assembled drain. Lever Handle.
Satin Nickel (PVD) finish.
4-3/4"
(121mm)
9-1/8"
(232mm)
4-1/2"
(114mm)
6-1/4"
(159/mm)
2-3/8"
(60mm)
1-1/4" O.D.
(32mm O.D.)
GENERAL DESCRIPTION:
PRODUCT FEATURES:
Single control lavatory faucet on 4" centers. Washerless 40mm
ceramic disc valve cartridge. Flex inlet supplies with 3/8"
compression thread. Installs with and without deck plate. Metal
lever handle. Metal construction. Metal body with color
matched underbody. 20" (500mm) long flexible stainless steel
drain cable is pre-assembled to faucet body. Speed Connect®
pre-assembled drain body with 1-1/4 inch (32mm) tail piece.
1,25 gpm/5,6L/min. maximum flow rate.
Speed Connect ® Drain:
• 1/3 the parts, installs in 1/3 the time.
• No tools or plumbers putty required for installation.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in tight spaces.
Simple Installation: Fast and easy one person installation.
Faucet drops in from top. Installs with and without deck plate.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
Longer Spout: Provides extended reach into lavatory.
SUGGESTED SPECIFICATION:
Single control lavatory fitting shall feature cast brass waterways with 1/2" male inlet shanks. Shall also feature washerless
40mm ceramic disc valve cartridge. Shall also feature a drain body with stainless steel cable actuation. Fitting shall be
American Standard Model # 7164CASF.
HD-17
© 2011 AS America, Inc.
ESPAÑA™
SINGLE CONTROL LAVATORY FAUCET
CODES AND STANDARDS
FLOW RATE*
2.0
GALLONS PER MINUTE
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B 125
1.5
1.0
0.5
0.0
20
40
60
80
100
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Product
Number
Description
7164CASF
Lavatory faucet. Speed Connect® pre-assembled drain. Satin Nickel (PVD) finish.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
HD-18
© 2011 AS America, Inc.
CADET®
SINGLE CONTROL LAVATORY FAUCET
MODEL NUMBER:
8115CASF Lavatory Faucet
Speed Connect ® pre-assembled drain. Lever handle.
Satin Nickel (PVD) finish.
3-1/4"
(85mm)
4-3/4"
(121mm)
3"
(76mm)
HOLE
SIZE
1-1/8 "
(29mm)
1"
(25mm)
6-1/16"
(154mm)
4"
(102mm)
1-9/16 "
(40mm)
1-9/16 "
(40mm)
4-3/16"
(107mm)
1-1/4" O.D.
(32mm O.D.)
GENERAL DESCRIPTION:
PRODUCT FEATURES:
Single control lavatory faucet on 4" centers. Washerless 40mm
ceramic disc valve cartridge. Durable cast brass waterway with
1/2" male threaded brass inlet shanks. Metal body with color
matched underbody. Lever handle. 20" (500mm) long flexible
stainless steel drain cable is pre-assembled to faucet body.
Speed Connect® pre-assembled drain body with 1-1/4 inch
(32mm) tail piece. 1,25gpm/5,6L/min. maximum flow rate.
Speed Connect ® Drain:
• 1/3 the parts, installs in 1/3 the time.
• No tools or plumbers putty required for installation.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in tight spaces.
Simple Installation: Fast and easy one person installation.
Faucet drops in from top. Quick Spin™ nuts secure faucet in place.
Cast Brass Waterways with "City Shanks": Strong and
durable. Integral tabs on casting provide a wobble-free
installation.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
Longer Spout: Provides extended reach into lavatory.
SUGGESTED SPECIFICATION:
Single control lavatory fitting shall feature cast brass waterways with 1/2" male inlet shanks. Shall also feature washerless
40mm ceramic disc valve cartridge. Shall also feature a drain body with stainless steel cable actuation. Fitting shall be
American Standard Model # 8115CASF.
HD-19
© 2011 AS America, Inc.
CADET®
SINGLE CONTROL LAVATORY FAUCET
CODES AND STANDARDS
FLOW RATE*
2.0
GALLONS PER MINUTE
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
CSA B 125
1.5
1.0
0.5
0.0
20
40
60
80
100
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Product
Number
Description
8115CASF
Lavatory faucet. Speed Connect® pre-assembled drain. Satin Nickel (PVD) finish.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
HD-20
© 2011 AS America, Inc.
CADET®
TWO-HANDLE WIDESPREAD LAVATORY FAUCET
MODEL NUMBER:
3885CASF Widespread Lavatory
Speed Connect® pre-assembled drain.
Lever handles. Satin Nickel (PVD) finish.
4-1/2"
(114mm)
5-5/16"
(135mm)
2" DIA.
(50mm)
1-3/8"
(35mm)
MAX.
1-3/8"
(35mm) DIA.
MOUNTING
HOLES (3)
FLEXIBLE
HOSE
3-3/4"
(97mm)
2-1/16"
(52mm)
DIA.
1-1/8"
(28mm)
DIA.
FLEXIBLE
HOSE
6" TO 12"
(152mm - 305mm)
FLEXIBLE
FOR GROUND JOINT
OR 1/2" (13mm) O.D. SLIP
CONNECTION
1-1/4" O.D.
(32mm O.D.)
GENERAL DESCRIPTION:
Cast brass valve bodies with reinforced flexible hose
connections for 6" to 12" (152mm to 305mm) installations.
1/4 turn washerless ceramic disc valve cartridges. One-half
inch brass male inlets. 20" (500mm) long flexible stainless
steel drain cable is pre-assembled to faucet body. Speed
Connect® pre-assembled drain body with 1-1/4 inch (32mm) tail
piece. 1,25gpm/5,6L/min. maximum flow rate.
PRODUCT FEATURES:
Speed Connect® Drain:
• 1/3 the parts. Installs in 1/3 the time.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in
tight spaces.
Brass Construction: Durable. Ideal for prolonged contact
with water.
Ceramic Disc Valve Cartridges: Smooth handle
operation and assures a lifetime of drip-free performance.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
SUGGESTED SPECIFICATION:
Two handle widespread lavatory faucet shall feature cast brass valve bodies with reinforced flexible hose connections for 6"
to 12" installations. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Shall also feature a drain body with
stainless steel cable actuation. Fitting shall be American Standard Model # 3885CASF.
HD-21
© 2011 AS America, Inc.
CADET®
TWO-HANDLE WIDESPREAD LAVATORY FAUCET
CODES AND STANDARDS
FLOW RATE*
2.0
GALLONS PER MINUTE
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
1.5
1.0
0.5
0.0
20
40
60
80
100
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Product
Number
Description
3885CASF
Lavatory faucet. Lever Handles. Speed Connect ® pre-assembled drain. Satin Nickel (PVD) finish.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
HD-22
© 2011 AS America, Inc.
MARQUETTE™
TWO-HANDLE LAVATORY FAUCET
MODEL NUMBER:
7764CAF Centerset Lavatory Faucet
Speed Connect ® pre-assembled drain.
Lever Handles. Polished Chrome finish.
4"
(102mm)
9-3/16"
(234mm)
4-13/16"
(122mm)
3-9/16"
91mm)
3-3/8"
(86mm)
1-1/8" MAX.
(32mm)
4-3/4"
(121mm)
2"
(51mm)
1-1/4" OD
(32mm OD)
6-1/4"
(159mm)
GENERAL DESCRIPTION:
PRODUCT FEATURES:
Centerset lavatory faucet on 4" centers. 1/4 turn washerless
ceramic disc valve cartridges. Durable cast brass waterways
with one-half inch male inlet shanks. Metal body. Color
matched underbody. Metal lever handles. 20" (500mm) long
flexible stainless steel drain cable is pre-assembled to faucet
body. Speed Connect® pre-assembled drain body with 1-1/4 inch
(32mm) tail piece. 1,25gpm/5,6L/min. maximum flow rate.
Speed Connect ® Drain:
• 1/3 the parts, installs in 1/3 the time.
• No tools or plumbers putty required for installation.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in tight spaces.
Simple Installation: Fast and easy one person installation.
Faucet drops in from top. Speed Connect® nuts push up and
hand-turn to tighten.
Cast Brass Waterways with "City Shanks": Strong and
durable. Integral tabs on casting provide a wobble-free
installation.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
SUGGESTED SPECIFICATION:
Two-handle 4" centerset lavatory faucet shall feature a cast brass waterway. Shall also feature 1/4 turn washerless ceramic
disc valve cartridges. Shall also feature a drain body with stainless steel cable actuation. Fitting shall be American Standard
Model # 7764CAF.
HD-23
© 2011 AS America, Inc.
MARQUETTE™
TWO-HANDLE LAVATORY FAUCET
CODES AND STANDARDS
FLOW RATE*
2.0
GALLONS PER MINUTE
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B125
NSF 61/Section 9
1.5
1.0
0.5
0.0
20
40
60
80
100
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Product
Number
7764CAF
Description
Centerset lavatory. Lever Handles. Speed Connect ® pre-assembled drain and Speed Connect ® nuts.
Polished Chrome finish.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
HD-24
© 2011 AS America, Inc.
MARQUETTE™
ANTI-SCALD PRESSURE BALANCE TUB & SHOWER SET
MODEL NUMBER:
7761CA Pressure Balance Tub and Shower Set
Easy Clean showerhead. I.P.S. diverter tub spout.
Polished Chrome finish.
GENERAL DESCRIPTION:
Cast brass valve body. Washerless 47mm ceramic disc
valve cartridge with volume and temperature control. Hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressures. 1/2" female I.P.S.
inlets/outlets. Easy clean showerhead has 1,7gpm/
7,6L/min. flow restrictor. Metal lever handle. Rough-in
plaster guard designed for use as thin-wall mounting
adaptor. I.P.S. diverter tub spout.
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
smooth handle operation and drip-free performance.
Pressure Balancing Valve: Maintains output
temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system engineered to
eliminate cross flow and spool "thumping". Avoids failure
due to mineral deposits - ideal for use with hard water.
Adjustable Hot Limit Safety Stop: Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
Integral Plaster Guard and Mounting Plate:
Plaster guard designed to protect valve during installation
and to serve as a mounting plate for thin wall installations.
Lifetime Warranty on Function and Finish.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall be cast brass construction. Easy clean showerhead and I.P.S. diverter tub spout. Fitting shall be
equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits.
Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American Standard
Model # 7761CA.
HD-25
© 2011 AS America, Inc.
MARQUETTE™
ANTI-SCALD PRESSURE BALANCE TUB & SHOWER SET
CODES AND STANDARDS
FLOW RATE*
Spout
Shower
8
GALLONS PER MINUTE
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
ASSE 1016
6
4
2
0
20
40
60
80
100
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Product
Number
7761CA
Description
Pressure Balance Tub/Shower. Female I.P.S. inlets/outlets. Easy clean showerhead. I.P.S. diverter tub spout.
Polished Chrome finish.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
HD-26
© 2011 AS America, Inc.
ONYX™
ANTI-SCALD PRESSURE BALANCE TUB & SHOWER SET
MODEL NUMBER:
2590562CA.002 Pressure Balance Tub and
Shower Set
Easy Clean showerhead. I.P.S. diverter tub spout.
Polished Chrome finish.
1-5/8" TO 3-1/4"
(41mm - 83mm)
FINISHED WALL
1/2" NPT
(12,7mm)
4-1/2" REF.
(114mm)
GENERAL DESCRIPTION:
Cast brass valve body. Washerless 47mm ceramic disc
valve cartridge with volume and temperature control. Hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressures. 1/2" female I.P.S.
inlets/outlets. Easy clean showerhead has 1,7gpm/
7,6L/min. flow restrictor. Metal lever handle. Rough-in
plaster guard designed for use as thin-wall mounting
adaptor. I.P.S. diverter tub spout.
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
80" AND 86"
(2032mm - 2184mm)
74" FOR HEAD
CLEARANCE
(188cm)
SHW
"SEE
ILLUSTRATION "
8-1/4"
(210mm)
TUB
18" OPTIONAL
(45,7cm)
4-3/4"
(121mm)
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
smooth handle operation and drip-free performance.
Pressure Balancing Valve: Maintains output
temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system engineered to
eliminate cross flow and spool "thumping". Avoids failure
due to mineral deposits - ideal for use with hard water.
1/2" (13mm) COPPER
4"
(102mm)
TOP OF
TUB RIM
1" (25mm) MIN.
BOTTOM OF TUB
OUTLETS 1/2" (13mm) NPT
6-11/16"
(170mm)
Adjustable Hot Limit Safety Stop: Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
Integral Plaster Guard and Mounting Plate:
Plaster guard designed to protect valve during installation
and to serve as a mounting plate for thin wall installations.
THREADED INLETS
(STOPS)
5-5/8"
(143mm)
1-3/4"
1-3/4"
(44mm)
Lifetime Warranty on Function and Finish.
INLETS
1/2" NPT
5-5/8"
(143mm)
SUGGESTED SPECIFICATION:
Bath/shower fitting shall be cast brass construction. Easy clean showerhead and I.P.S. diverter tub spout. Fitting shall be
equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits.
Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American Standard
Model # 2590562CA.002.
HD-27
© 2011 AS America, Inc.
ONYX™
ANTI-SCALD PRESSURE BALANCE TUB & SHOWER SET
CODES AND STANDARDS
FLOW RATE*
Spout
Shower
8
GALLONS PER MINUTE
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
ASSE 1016
6
4
2
0
20
40
60
80
100
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Product
Number
2590562CA.002
Description
Pressure Balance Tub/Shower. Female I.P.S. inlets/outlets. Easy clean showerhead.
I.P.S. diverter tub spout. Polished Chrome finish.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
HD-28
© 2011 AS America, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement