Sony KDL32XBR950 User manual
KDL32XBR950 KDL42XBR950 Thank you for purchasing this Sony product. Checking the Supplied Accessories Remote Control (RM-Y1000): 1 Two size AA Display Interface batteries (R06 Type): Cable: Quick Start Guide – Insert batteries into the remote control. 1 Connect the display interface cable (supplied) to the DISPLAY SIGNAL IN jacks, and the AC power cord (supplied) to the AC IN jack of the unit. KDL32XBR950 After following this step by step guide you will be able to: 3 Connecting the Display Unit to the Media Receiver Unit KDL42XBR950 4 The way in which you will connect your TV varies, depending on how your home receives a signal (cable, cable box, antenna) and whether or not you plan to connect a VCR or other optional AV equipment. See examples A, B or C to connect your TV. For details on other connection examples, see pages 31 to 54 of the operating instructions. A Cable or Antenna Antenna Cable: For best results, use this connection if you are connecting a cable or an antenna and you; Two AC power cords: • Do not need a cable box to unscramble channels. • Do not intend to connect a VCR. – Connect the display unit to the media receiver unit. – Connect a cable or antenna to your TV. Connecting a Cable or Antenna For antenna connection, use the supplied antenna cable. • Speaker jack covers (KDL42XBR950 only) • Operating Instructions • Quick Start Guide • Warranty Card Rear of Media Receiver Unit SONY EXCLUSIVE CABLE ONLY WHITE BLACK CABLE DISPLAY SIGNAL IN S400 VHF/UHF (TS/DV/MICROMV) i.LINK – Tune your TV . – Program your remote control Now you are ready for viewing TV programs. Inserting Batteries into the Remote Control 1 Open the battery compartment as illustrated below. 2 Tighten the screw Display Interface slowly until the cable (supplied) screw is stabilized. When you install KDL42XBR950, use the optional accessories as follows: • SONY TABLE TOP STAND: SU-P42T2 • SONY WALL-MOUNT BRACKET: SU-PW2 • SONY FLOATING STAND: SU-PF1 2 Connect the other end of display interface cable to the media receiver unit’s DISPLAY SIGNAL OUT jacks, and connect the media receiver unit’s AC power cord (supplied) to the AC IN jack . 2 Insert two size AA batteries (supplied) by matching the e and E terminals on the batteries to the diagram inside the battery compartment. VHF/UHF i.LINK WHITE BLACK ~ AC IN DISPLAY SIGNAL OUT Display Interface cable (supplied) DISPLAY SIGNAL OUT Antenna cable (supplied) US © 2003 Sony Corporation Printed in Japan 4-102-399-01(1) or 75-ohm coaxial cable (not supplied) When using an indoor antenna, such as rabbit-ear or dipole-antenna, keep the antenna away from the display unit. If not, noise may appear on the screen. B Cable Box and Cable AC power cord (supplied) • Your cable company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble all channels. • You do not have a VCR. Tighten the screw slowly until the screw is stabilized. Remove the batteries to avoid damage from possible battery leakage whenever you anticipate that the remote control will not be used for an extended period. Handle the remote control with care. Avoid dropping it, getting it wet, placing it in direct sunlight, near a heater, or where the humidity is high. ~ AC IN BLACK For best results, use this connection if; CABLE S400 (TS/DV/MICROMV) 3 Close the battery compartment. WHITE AC power cord (supplied) Be sure to use the supplied AC power cords. When connecting optional components, do not connect the AC power cords to wall outlets until you have completed making all connections. Do not tighten the screws too much. It may damage the screws. Do not use damaged cables, such as cables whose connectors are deformed. Handle the display interface cable with care. This unit may fall and cause injury if accidently knocked or pulled by the connected cable. To store the AC power cord and the display interface cable in the stand; (KDL32XBR950) See “Storing the AC power cord and the display interface cable into the stand (KDL32XBR950 only)” on page 28 of the operating instructions. (KDL42XBR950) See the operating instructions for the optional tabletop stand. IN OUT CATV cable Splitter 75-ohm Cable Box coaxial cable (not supplied) Antenna cable (supplied) 75-ohm coaxial cable (not supplied) Rear of Media Receiver Unit CABLE S400 VHF/UHF (TS/DV/MICROMV) i.LINK WHITE BLACK DISPLAY SIGNAL OUT ~ AC IN 4 Connecting a Cable or Antenna Tuning Your TV Automatically C Cable Box, VCR and DVD Player 5 1 Connect the display unit and media receiver unit to wall outlets. For best results, use this connection if; • Your cable company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble all channels. PIC OFF POWER POWER/STANDBY TIMER i.LINK INPUT SELECT – VOL + Programming Your Remote Control The remote control is preset to operate Sony brand video equipment. Beta/ED Beta VCRs: 303, 8mm VCR: 302, VHS VCR: 301, DVD player: 751, i.LINK: 901. If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedure to program the remote control. TV VIDEO MEMORY STICK 1 Refer to the following list of “Manufacturer’s Codes” below and right, PIC OFF POWER POWER/STANDBY TIMER i.LINK INPUT SELECT – VOL + – CHANNEL + i.LINK/STANDBY TV VIDEO MEMORY STICK i.LINK 2 Press POWER to turn on the TV. The Initial Setup screen appears. POWER/STANDBY TIMER 2 Press FUNCTION repeatedly until the DVD/VCR, SAT/CABLE or i.LINK/STANDBY DVD Player i.LINK indicator lights up. 3 Press SAT/CABLE for five seconds until the indicator of the selected Rear of Media Receiver Unit HD/DVD IN (1080i/720p/480p/480i) Y VIDEO PB Y 5 AUDIO PB L AUDIO L 4 SUB WOOFER OUT(VAR) OPTICAL OUT VIDEO IN 3 PR R PR R S400 L IN R OUT i.LINK AUDIO OUT (VAR/FIX) DVI–HDTV IN R - AUDIO - L WHITE 6 BLACK ~ AC IN CATV cable 75-ohm coaxial cable (not supplied) Cable box A/V cable Splitter (not supplied) CATV cable to select the on-screen display language. Then press ENTER of the remote control. Language: English Español Fr a n ç a i s DISPLAY SIGNAL OUT Antenna cable (supplied) VCR 3 Press v or V of the remote control Initial Setup VHF/UHF (TS/DV/MICROMV) DVI–HDTV R 1 CABLE CONTROL S L AUDIO and find the three-digit code number for the manufacturer of your equipment. (If more than one code number is listed, use the number listed first.) POWER Audio cable Move: Select: End: 4 Press v or V of the remote control to select “Yes”, then press ENTER of the remote control. First please connect cable/antenna Star t auto program now? Ye s No 75-ohm coaxial cable (not supplied) End: 5 Press ENTER. You must do step 5 within 10 seconds of step 4, or you must redo steps 4 through 5. 6 To check if the code number works, aim the remote control at the equipment and press POWER that corresponds with that equipment. If it responds, you are done. If not, try using another code listed for that manufacturer. Manufacturer’s Codes VCRs Au t o P r o gra m CH Found : CH Found : manufacturer’s code number. MENU m Analog Digital 4 While the desired indicator is flashing, enter the three-digit The message “Start auto program now?” appears. Initial Setup Select: input flashes. MENU m Move: Manufacture Code Manufacture Code RCA/PROSCAN 304, 305, 308, 309, 311, 312, 313, 310, 329 Sony 651 Realistic 309, 330, 328, 335, 324, 338 Sansui 314 Samsung 322, 313, 321 Sanyo 330, 335 Cable Boxes Scott 312, 313, 321, 335, 323, 324, 325, 326 Manufacture Code Sharp 327, 328 Sony 230 Signagure 2000 (M.Ward) 338, 327 Hamlin/Regal 222, 223, 224, 225, 226 SV2000 338 Jerrold/G.I. Sylvania 308, 309, 338, 310 Symphonic 338 201, 202, 203, 204, 205, 206, 207, 208, 218 Tashiro 332 Oak 227, 228, 229 Tatung 314, 336, 337 Panasonic 219, 220, 221 Teac 314, 336, 338, 337 Pioneer 214, 215 Technics 309, 308 Toshiba 312, 311 Wards 327, 328, 335, 331, 332 Yamaha 314, 330, 336, 337 Satellite Receivers Zenith 331 Manufacture Code Sony 801 Laserdisc Players Dish Network 810 Manufacture Code Echostar 810 Sony 701 General Electric 802 704, 710 Hitachi 805 702 Hughes 804 Mitsubishi 809 Panasonic 803 RCA/PROSCAN 802, 808 Toshiba 806, 807 – CHANNEL + 7 6 0 Searching.. Please wait. Allow 33 minutes fo r c o m p l e t i o n Auto Program automatically creates a list of receivable channels. When finished, the lowest numbered channel is displayed. Press any button to cancel To run the Auto Program feature at a later time, see page 110 of the operating instructions. To add individual digital channels, use the Digital Channel feature on page 78 of the operating instructions. The Auto Program feature does not apply for installations that use a cable box for all channel selection. Auto Program may take up to 30 minutes to complete. A progress bar is displayed while the channel list is being created. Panasonic Manufacture Code Manufacture Code Sony 301, 302, 303 JVC 314, 336, 337, 345, 346, 347 Admiral (M.Ward) 327 338, 344 Aiwa Kenwood 314, 336, 332, 337 AV Receiver* VCRs i.LINK The equipment must have infrared (IR) remote capability in order to be used with the remote control. 8 Manufacturer’s Codes i.LINK/STANDBY Component video cable S VIDEO 6 Pioneer DVD Players Audio Dynamic 314, 337 LG 332 Manufacture Code Broksonic 319, 317 LXI (Sears) Sony 751 Canon 309, 308 332, 305, 330, 335, 338 Sony (i.LINK) 901 Citizen 332 Magnavox 308, 309, 310 General Electric 755 Craig 302, 332 Marantz 314, 336, 337 Hitachi 758 Criterion 315 Marta 332 JVC 756 Curtis Mathes 304, 338, 309 Memorex 309, 335 Magnavox 757 Daewoo 341, 312, 309 Minolta 305, 304 Mitsubishi 761 DBX 314, 336, 337 Mitsubishi/MGA 323, 324, 325, 326 Oritron 759 Dimensia 304 Multitech 325, 338, 321 Panasonic 753 Emerson 319, 320, 316, 317, 318, 341 NEC 314, 336, 337 Philips 757 Olympic 309, 308 Pioneer 752 330, 335 Optimus 327 RCA/Proscan 755 338 Orion 317 Samsung 758 329, 304, 309 Panasonic 308, 309, 306, 307 Toshiba 754 Go Video 322, 339, 340 Pentax 305, 304 Zenith 760 Goldstar 332 Philco 308, 309 Hitachi 306, 304, 305, 338 Philips 308, 309, 310 Instant Replay 309,308 Pioneer 308 JC Penney 309, 305, 304, 330, 314, 336, 337 Quasar 308, 309, 306 Fisher Funai General Electric 5.1 DVD AV System (DAV)* Manufacture Code Sony 601 Scientific Atlanta 209, 210, 211 Tocom 216, 217 Zenith 212, 213 * This manufacturer code might not work for some models. Please see page 62 of the operating instructions for the models functioning with these codes. Your TV is now ready for use.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project