Sony | KV-EX29 | User's Manual | Sony KV-EX29 User's Manual

4-078-366-51 (1)
Trinitron Color TV

Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
KV-EX34
KV-EX29
© 2000 Sony Corporation
M87
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 110 – 240 V AC.
2
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
For children’s safety, do not leave children
alone with the TV. Do not allow children to
climb onto it.
To prevent fire or shock hazard, do not expose
the TV to rain or moisture.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
Pull the power cord out by the plug. Do not pull
the power cord itself. Disconnect the TV before
moving it or if you are not going to use it for
several days.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are
present inside the TV. Refer servicing and
disposal of the TV to qualified personnel.
Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may
be subject to excessive dust, heat, moisture or
vibrations.
Table of Contents
Using Your New TV
Using Your New TV
Getting Started ............................................................................................. 4
Step 1: Connect the antenna ................................................................. 4
Step 2: Insert the batteries into the remote ......................................... 5
Step 3: Preset the channels automatically ........................................... 5
Connecting the 3D WOOFER .................................................................... 6
Connecting optional components ............................................................. 7
Securing the TV .......................................................................................... 10
Watching the TV ........................................................................................ 11
Advanced Operations
Changing the “PICTURE” setting
.. 25
Selecting the picture and sound
modes .................................................. 15
Changing the “SOUND” setting
.... 27
Viewing higher quality pictures ...... 16
Viewing your favorite channels ....... 17
Watching two programs at the
same time ............................................ 18
Listening with surround sound ....... 19
Operating optional components ...... 20
Adjusting Your Setup (MENU)
Changing the “PIP” setting
GB
........ 29
Changing the “SETUP”setting
... 30
Changing the channel preset
.............. 32
(“CH PRESET”) setting
Additional Information
Self-diagnosis function ...................... 35
Troubleshooting ................................. 36
Overview of controls ......................... 39
Specifications ...................... Back cover
Introducing the menu system .......... 22
WARNING (continued)
Do not install the TV in an unstable position.
Use a proper TV stand.
Do not place any objects on the TV.
3
Using Your New TV
Getting Started
CAUTION
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Step 1
Connect the antenna
If you wish to connect a VCR, see the Connecting a VCR diagram below.
Rear of TV
Antenna cable (not supplied)
or
IEC connector
(not supplied)
Antenna cable (not supplied)
: Signal flow
Connecting a VCR
To watch the video input, press t (see page 12).
To 8 (antenna)
Antenna cable (not supplied)
Rear of TV
To antenna
output
VCR
WOOFER
R
L
Y
CB
CR
4
1
AUDIO VIDEO
R
VIDEO IN
L
2
3
S video cable
(not supplied)
VIDEO OUT
To video and
audio outputs
To S video To
(S video input)
output
Audio/Video cable
(not supplied)
4
Using Your New TV
To t 1, 2, or 3
(video input)
(yellow)
-L (MONO) (white)
-R (red)
: Signal flow
Using Your New TV
Notes
• If you connect a monaural VCR, connect the yellow plug to
(the yellow
jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When both the
(S video input) and t 1 (video input) are connected,
the
(S video input) is automatically selected. To view the video input
to t 1 (video input), disconnect the S video cable.
• When no signal is input from the connected video equipment, the TV
screen becomes blue.
Step 2
b
Insert the batteries into
the remote
Note
• Do not use old batteries or different types of batteries together.
Step 3
Preset the channels automatically
Front panel
1
L(MONO)
4
R
ENTER
MENU
AUTO
PROGR
2
AUTO
PROGR
SELECT
PROGR
b
AU TO PROGRA M
PR : 0 1
T V S Y S : AU TO
VH F L OW
1
Tips
• To stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 33).
Using Your New TV
5
Connecting the 3D WOOFER
You can enjoy high quality sound by connecting the 3D WOOFER.
1
Bottom of 3D WOOFER
2
Rear of TV
3D WOOFER
3 Red wire
Black wire
1
Place the foot at the front of the 3D WOOFER into the footholds on the top
of your TV.
2
Place the foot at the rear of the 3D WOOFER into the footholds at the rear
of your TV.
3
Connect the wires to the 3D WOOFER (4Ω) terminals at the rear of your TV.
The red wire should be connected to the 3 red terminal and the black wire
to the # black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with it’s neighbouring 3D WOOFER terminal.
6
Using Your New TV
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game, or stereo system. To watch and operate the connected
equipment, see pages 12 and 20.
Using Your New TV
Connecting a camcorder/video game equipment
using the t (video input) jacks
Front of TV
S video cable (not supplied)
Audio/Video cable (not supplied)
To
(S video
input)
To t 4
(video input)
To video and
audio outputs
Camcorder
L(MONO)
4
R
ENTER
MENU
SELECT
AUTO
PROGR
PROGR
or
L(MONO)
To S video output
Video game
equipment
: Signal flow
R
4
Notes
• When connecting video game equipment, display the “PICTURE” menu
and select “ON” for “GAME MODE” to adjust the picture setting that is
suitable for video games (see page 25).
• You can also connect video equipment to the t 1, 2, or 3 (video input)
jacks at the rear of your TV.
• When both the
(S video input) and t 4 (video input) are connected,
the
(S video input) is automatically selected. To view the video input
to t 4 (video input), disconnect the S video cable.
Connecting audio/video equipment using the T
(monitor output) jacks
Rear of TV
WOOFER
R
Antenna cable (not supplied)
L
Y
CB
To
antenna
output
CR
4
1
(yellow)
-L (MONO)
(white)
-R (red)
2
3
To T
(monitor
output)
To video and
audio inputs
Audio/Video cable (not supplied)
Audio system
VCR
or
To
audio
inputs
Audio cable
(not supplied)
: Signal flow
Note
• If you select “DVD” on your TV screen, no signal will be output at the
T (monitor output) jacks (see page 12).
continued
Using Your New TV
7
Connecting optional components (continued)
Connecting a DVD player to
(component video input)
1 Using an audio cable, connect R and L under
(component video input) on your
TV to the LINE OUT, AUDIO R and L output connectors on your DVD player.
2 Using a component video cable, connect Y, CB, and CR under
(component video
input) on your TV to the COMPONENT VIDEO OUT Y, CB, and CR output
connectors on your DVD player.
3 Press t on the remote or the TV until “DVD” appears on the screen.
Rear of TV
DVD player
R
COMPONENT VIDEO OUT
CR
CB
Y
S VIDEO OUT
LINE OUT
R-AUDIO-L VIDEO
L
Y
CR
To
L (white)
R (red)
Audio cable
(not supplied)
To audio
output
CB
To
(component video input)
: Signal flow
To component
video output
Component video cable
(not supplied)
Notes
• Some DVD player terminals may be labeled differently:
Connect
To (on the DVD player)
Y (green)
Y
CB (blue)
Cb, B-Y or PB
CR (red)
Cr, R-Y or PR
• When connecting to
(component video input) on your TV, you must
connect Y, CB, and CR to receive the video signals, and connect L and R to
receive analog audio signals.
8
Using Your New TV
Connecting a DVD player to t (video input)
Connect t 1, 2, or 3 (video input) /
OUT on your DVD player.
(audio/video) connectors on your TV to LINE
Rear of TV
Using Your New TV
DVD player
WOOFER
R
L
Y
CB
CR
4
1
2
3
LINE OUT
R-AUDIO-L VIDEO
To video and
audio outputs
Audio/Video cable (not supplied)
(yellow)
-L (MONO) (white)
-R (red)
To t 1, 2, or 3
(video input)
: Signal flow
Notes
• Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, adjust the sharpness (“SHARP”)
under “PERSONAL ADJUST” in the “PICTURE MODE” menu (see
page 26).
• Connect your DVD player directly to your TV. Connecting the DVD
player through other video equipment will cause unwanted picture noise.
Using Your New TV
9
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
the supplied screws, attach the stabilizer band to the TV stand and to
A With
the rear of the TV using the provided hole.
OR
the cord or chain through the clamps to secure the TV against a wall or
B Put
pillar.
20
mm
3.8 mm
A
B
OR
Note
• Use only the supplied screws. Use of other screws may damage the TV.
10
Using Your New TV
Watching the TV
DRC-MF
1
2
3
4
5
6
7
8
9
0
JUMP
Number buttons
MENU
PIC MODE
PIP PROGR
ENTER
L(MONO)
4
R
ENTER
MENU
AUTO
PROGR
1 indicator
SELECT
PROGR
FAVORITE
RESET
Using Your New TV
This section explains various functions
and operations available while watching
the TV. Most operations can be done
using the remote.
PIP PROGR
SOUND
MODE SURROUND
ENTER
MENU
1
2
AUTO
PROGR
PROGR
SELECT
PROGR +/–
PROGR
Press ! to turn on the TV.
When the TV is in standby
mode (the 1 indicator on
the TV is lit red), press ?/1
on the remote or
PROGR +/– on the TV.
Press PROGR +/– or the
number buttons to select
the TV channel.
For double digit numbers, press
-, then the number (e.g., for 25,
press -, then 2 and 5).
1
2
3
4
5
6
7
8
0
JUMP
PROGR
or
9
Note
• When you turn on the TV, either the program number or video mode is
displayed for approximately 40 seconds. The ECO MODE (
) icon will
also appear if “ECO MODE “ in the “SETUP” menu is set “ON” (see
page 30).
To select a TV program quickly
(1) Press and hold PROGR +/–.
(2) Release PROGR +/– when the desired program number appears.
Note
• When you select a TV program quickly, the picture may be disrupted.
This does not indicate a malfunction.
continued
Using Your New TV
11
Watching the TV (continued)
DRC-MF
L(MONO)
R
4
ENTER
MENU
2
3
4
5
6
7
8
9
0
JUMP
1 indicator
SELECT
AUTO
PROGR
1
PROGR
MENU
PIC MODE
PIP PROGR
ENTER
MENU
SELECT
V/v/ENTER
ENTER
MENU
AUTO
PROGR
PROGR
JUMP
FAVORITE
RESET
PIP PROGR
SOUND
MODE SURROUND
PROGR
2 +/–
VIDEO
TITLE
TV
Additional tasks
To
Press
Turn off temporarily
?/1.
The 1 indicator on the TV lights up red.
Turn off completely
! on the TV.
Adjust the volume
2 +/–.
Mute the sound
%.
Watch the video input
(VCR, camcorder, etc.)
t (or t on the TV) to select “VIDEO 1”,
“VIDEO 2”, “VIDEO 3”, “VIDEO 4”or “DVD”.
To return to the TV screen, press a (or t on the TV).
Jump back to the previous channel
JUMP.
Display the on-screen information*
.
* Some picture/sound settings, and either the program number or video
mode are displayed. The on-screen display for the picture/sound settings
disappears after about 3 seconds.
12
Using Your New TV
Changing the menu language
You can change the menu language as well as the on-screen language. For details on
how to use the menu, see Introducing the menu system on page 22.
Press MENU.
MENU
b
2
Press V or v to select
then press ENTER.
,
ENTER
3
b
ENTER
Make sure “LANGUAGE” is
selected then press ENTER .
ENTER
4
Press V or v to select the
desired language
(e.g.,”
“), then
press ENTER .
ENTER
b
ENTER
P I C T URE
DRC - MF : DRC 1 2 5 0
P I C T URE MO DE : DYNAM I C
WI DE MODE : OF F
GAME + MODE +: +OF
+ +F + + + + + + +
b
S E T UP
L ANGUAGE : E NG L I SH
P I C ROT A T I ON
ECO MODE : OF F
PROGRAM S E T UP
CO L OR S Y S : AU TO
b
S E T UP
ENG L I SH
L ANGUAGE :
P I C ROT A T I O
ECO MODE : O F
PROGRAM S E T
CO L OR S Y S : A
Using Your New TV
1
b
The selected menu
language appears.
To return to the normal screen
Press MENU.
continued
Using Your New TV
13
Watching the TV (continued)
Setting the Wake Up timer
1
Press
until the desired
period of time appears.
The Wake Up timer starts
immediately after you
have set it.
2
3
WAKE UP TIMER:10M
After 10 minutes
b
WAKE UP TIMER:OFF
No Wake Up Timer
WAKE UP TIMER:12H00M
After 12 hours
Select the TV channel or video mode you want to wake up to.
Press [/1, or set the Sleep timer if you want the TV to turn off
automatically.
The indicator on the TV lights up orange.
To cancel the Wake Up timer
Press until “WAKE UP TIMER: OFF” appears, or turn off the
TV’s main power.
Note
• If no buttons or controls are pressed for more than two hours after the TV
is turned on using the Wake Up timer, the TV automatically goes into
standby mode. To resume watching the TV, press any button or control on
the TV or the remote.
Setting the Sleep timer
Press
until the desired
period of time appears.
The Sleep timer starts
immediately after you
have set it.
SLEEP TIMER:30M
After 30 minutes
SLEEP TIMER:60M
After 60 minutes
SLEEP TIMER:OFF
No Sleep Timer
SLEEP TIMER:90M
After 90 minutes
b
To cancel the Sleep timer
Press
14
Using Your New TV
until “SLEEP TIMER: OFF” appears, or turn the TV off.
Advanced Operations
Selecting the picture
and sound modes
MENU
PIC MODE
PIP PROGR
PIC MODE
ENTER
FAVORITE
You can select picture and sound modes
and adjust the setting to your preference
in the “PERSONAL” option.
RESET
PIP PROGR
SOUND
MODE SURROUND
PROGR
SOUND MODE
Selecting the picture mode
Press PIC MODE
repeatedly until the
desired picture mode is
selected.
PIC MODE
DYNAMIC
STANDARD
PERSONAL
HI-FINE
To
“DYNAMIC”
receive high contrast pictures.
“STANDARD”
receive normal pictures.
“HI-FINE”
receive higher resolution pictures with mild contrast.
“PERSONAL”
receive the last adjusted picture setting from the “ADJUST” option in the
“PICTURE” menu (see page 26).
Selecting the sound mode
Press SOUND MODE
repeatedly until the
desired sound mode is
selected.
SOUND
MODE
≥ DYNAMIC
≥ DRAMA
≥ PERSONAL
≥ SOFT
Select
To
“DYNAMIC”
listen to dynamic and clear sound that emphasizes both the low and high
tones.
“DRAMA”
listen to sound that emphasizes voice and high tones.
“SOFT”
receive soft sound.
“PERSONAL”
receive the last adjusted sound setting from the “ADJUST” option in the
“SOUND” menu (see page 28).
Advanced Operations
Select
Tip
• You can also set the picture and sound modes using the menu (see
Changing the “PICTURE” setting on page 25 and Changing the
“SOUND” setting on page 27 ).
Advanced Operations
15
Viewing higher
quality pictures
DRC-MF
DRC-MF
— “DRC-MF”
The Digital Reality Creation-Multi
Function (DRC-MF) feature allows you
to enjoy higher quality pictures on your
TV. You can select “DRC1250” to watch
super real (higher resolution) pictures,
or “DRC PROGRESSIVE” to reduce any
jittering on the screen if necessary.
1
2
3
4
5
6
7
8
9
0
JUMP
MENU
PIC MODE
PIP PROGR
ENTER
FAVORITE
RESET
PIP PROGR
SOUND
MODE SURROUND
Press DRC-MF repeatedly
until you receive the
desired picture quality.
DRC-MF
b
DRC-MF: DRC1250
DRC-MF: DRC PROGRESSIVE
Select
To
“DRC1250”
select higher resolution pictures.
“DRC PROGRESSIVE”
reduce jitter of any small areas or scanning lines (e.g., letters
or the edge of objects) on the screen.
Tips
• You can also select the DRC-MF option using the menu (see Changing the
“PICTURE” setting on page 25).
• When the broadcast signal is weak, you may see some dots or noise on the
TV screen. To reduce this interference, display the “PICTURE” menu and
select “ADJUST” in “PICTURE MODE”, then adjust “SHARP” to reduce
the sharpness (see page 26).
Note
• The DRC-MF mode is not selectable when the “GAME MODE” or PictureIn-Picture (“PIP”) mode is turned “ON”.
The DRC-MF logo (
Sony Corporation.
16
Advanced Operations
) and “DRC-MF” are trademarks of
Viewing your
favorite channels
DRC-MF
You can display and select six of your
favorite channels directly from your TV
screen.
1
2
3
4
5
6
7
8
9
0
JUMP
Number buttons
MENU
PIC MODE
PIP PROGR
ENTER
FAVORITE
RESET
FAVORITE
PIP PROGR
SOUND
MODE SURROUND
Advanced Operations
PROGR
VIDEO
TITLE
TV
1
Press FAVORITE.
FAVORITE
b
2
Press the number button
from 1 to 6 to select the
desired channel.
1
1
2
3
4
5
6
b
Tip
• To program your favorite channels, see Adjusting each channel settings
(PROGRAM SETUP) on page 31.
Advanced Operations
17
Watching two
programs at the
same time
0
JUMP
/
/
/
MENU
PIC MODE
PIP PROGR
— “PIP”
ENTER
FAVORITE
With the Picture-in-Picture (PIP) feature, you
can display a sub screen within the main picture
of different TV programs or video inputs.
RESET
PIP PROGR
V (PIP PROGR +)/
v (PIP PROGR –)
SOUND
MODE SURROUND
Displaying a sub screen
Press
.
12
To return to the normal screen
Press
(when displaying the sub screen).
Additional PIP tasks
To
Press
change a TV program in the sub screen
V (PIP PROGR +) or v (PIP PROGR –).
select a video input in the sub screen
.
swap pictures between the main
and sub screens
.
freeze the sub screen
.
To unfreeze the screen, press the button again.
Tips
• You can also display the sub screen and exchange pictures between the main and
sub screens using the menu (see Changing the “PIP” setting on page 29).
• You can change the position of the sub screen (see Changing the “PIP” setting on
page 29).
Notes
• When you display a video input on the sub screen at a faster/slower
speed, the picture may be disrupted depending on the VCR type.
• If you display different color systems on the main screen and the sub
screen, the size of the sub screen may be different and the sub screen
picture may be disrupted. This does not indicate a malfunction of the TV.
18
Advanced Operations
Listening with
surround sound
MENU
PIC MODE
PIP PROGR
ENTER
FAVORITE
The surround feature enables you to
enjoy the sound effects of a concert hall
or movie theater.
RESET
PIP PROGR
SOUND
MODE SURROUND
SURROUND
PROGR
VIDEO
TITLE
TV
Press SURROUND
repeatedly until you
receive the desired
surround sound.
SURROUND: TruSurround
SURROUND: OFF
Select
To
“TruSurround”
listen to the surround sound that spreads out to the rear of a room.
“OFF”
turn off the surround sound.
Tip
• You can also select the surround option using the menu (see Changing the
“SOUND” setting on page 27).
The surround of your TV is categorized as TruSurround.
TM
is a trademark of SRS Labs, Inc. SRS and the SRS symbol are
registered trademarks of SRS Labs, Inc. in the United States and selected foreign
countries. SRS and TruSurround are incorporated under license from SRS Labs,
Inc. and are protected under United States Patent Nos. 4,748,669 and 4,841,572
with numerous additional issued and pending foreign patents.
Advanced Operations
19
Operating
optional
components
You can use the supplied remote to
operate Sony video equipment such as
Beta, 8 mm, VHS, MDP, CD or DVD.
1
2
3
4
5
6
7
8
9
0
JUMP
Number buttons
MENU
PIC MODE
MENU
PIP PROGR
V/v/B/b/ ENTER
ENTER
FAVORITE
RESET
PIP PROGR
SOUND
MODE SURROUND
PROGR
VIDEO
VIDEO ?/1
Video equipment
operation buttons
TITLE
Setting up the remote to work with other
connected equipment
While holding down VIDEO
?/1, press the following
number combinations to
enter the equipment’s code
number (see the chart
below.)
For example, to operate a
Sony 8 mm VCR:
VIDEO
+
0
b
2
Code numbers for Sony video equipment
To control
Hold down VIDEO ?/1 and press
DVD
00
VTR1 (Beta)
01
VTR2 (8 mm)
02
VTR3 (VHS)
03
MDP
04
CD
06
MD
07
Notes
• If your video equipment is furnished with a COMMAND MODE selector, set this
selector to the same position as the setting code.
• If the equipment does not have a certain function, the corresponding button on the
remote will not operate.
• When you remove the batteries, the code number may revert to the factory setting.
20
Advanced Operations
Operating a VCR using the remote
To
turn on/off
Press
record
N while pressing z.
play
N
stop
x
fast forward (M)
>
rewind the tape (m)
.
pause
X
Press again to resume normal playback.
search the picture forward (M)
or backward (m)
> or .during playback. Release to resume
normal playback.
VIDEO ?/1
Operating a DVD player using the remote
To
turn on/off
Press
play
N
stop
x
pause
X
Press again to resume normal playback.
VIDEO ?/1
step through different tracks of a disc
> to step forward or . to step backward.
display the title menu
TITLE
display the menu
MENU while holding down z.
select the menu item
V/v/B/b while holding down z.
Operating an MDP using the remote
To
turn on/off
Press
play
N
stop
x
pause
X
Press again to resume normal playback.
step through different tracks of a disc
> to step forward or . to step backward.
VIDEO ?/1
Operating a CD/MD using the remote
To
turn on/off
Press
play
N
stop
x
pause
X
Press again to resume normal playback.
go to the next/previous tracks
> or .
go forward (M)/
backward (m) quickly in a track
> or .while holding down N.
VIDEO ?/1
Advanced Operations
21
Adjusting Your Setup (MENU)
Introducing the menu system
The MENU button lets you open a menu and change the settings of your TV. The
following is an overview of the menu system.
PICTURE icon
SOUND icon
PIP icon
SETUP icon
CH PRESET icon
S E T UP
ENG L I SH
L ANGUAGE :
P I C ROT A T I
EC O MODE : O
PROGRAM S E
CO L OR S Y S :
Return icon
Name of the current
menu
Guide mark icon
Menu level 3
Menu level 2
Menu level 1
Level 1
Level 2
Level 3/Function
“PICTURE”
“DRC-MF”
Select the “DRC-MF” mode:
“DRC1250” t “PROGRESSIVE”
“PICTURE MODE”
Select the picture mode:
“DYNAMIC” t “STANDARD” t “HI-FINE” t
“PERSONAL” t “ADJUST”
“ADJUST”
Adjust the “PERSONAL” option:
“PICTURE” t “COLOR” t “BRIGHT” t “HUE” t
“SHARP”
“SOUND”
“WIDE MODE”
Change the picture size.
“GAME MODE”
Adjust the picture settings for video games.
“SOUND MODE”
Select the sound mode:
“DYNAMIC” t “DRAMA” t “SOFT” t
“PERSONAL” t “ADJUST”
“ADJUST”
Adjust the “PERSONAL” option:
“BASS” t “TREBLE” t “BALANCE” t “BBE”*
“SURROUND”
Select the “SURROUND” mode:
“TruSurround” t “OFF”
“INTELLIGENT
Adjust volume automatically.
VOL”
“PIP”
22
“POSITION”
Change the position of the sub screen.
“PIP”
Display a sub screen within the main picture.
“SWAP”
Exchange pictures between main screen and sub screen.
Adjusting Your Setup (MENU)
Level 1
Level 2
Level 3/Function
“SETUP”
“LANGUAGE”
Change the menu language:
“ENGLISH” t “
”(Chinese) t “
“
“CH PRESET”
”(Arabic) t
” (Thai)
“PIC ROTATION”
Adjust the picture position.
“ECO MODE”
Reduce power consumption of your TV.
“PROGRAM
SETUP”
Adjust each channel settings.
“COLOR SYS”
Select the color system:
“AUTO” t“ PAL” t “SECAM” t “NTSC3.58” t
“NTSC4.43”
“AUTO
PROGRAM”
Preset channels automatically.
“MANUAL
PROGRAM”
Preset channels manually.
“TV SYS”
Select the TV system:
“B/G” t “I” t “D/K” t “M”
* The BBE is manufactured by Sony Corporation under license from BBE
Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866.
The word “BBE” and the BBE symbol are the trademarks of BBE Sound, Inc.
Adjusting Your Setup (MENU)
continued
Adjusting Your Setup (MENU)
23
Introducing the menu system (continued)
How to use the menu
Press MENU to display
the menu.
MENU
PIC MODE
PIP PROGR
MENU
b
ENTER
FAVORITE
P I C T URE
DRC - MF : DRC 1 2 5 0
P I C T URE MO DE : DYNAM I C
WI DE MODE : OF F
F I C : OF F
GAMEN MODEN: OF
T P
RESET
PIP PROGR
SOUND
MODE SURROUND
PROGR
Press V or v (or B/b)
to select the desired
item.
ENTER
b
PIP
POS I T I ON :
P I P : OF F
SWA P
b
PIP
POS I T I ON :
P I P : OF F
SWA P
VIDEO
TITLE
Press ENTER to
confirm your
selection and go to
the next level.
TV
ENTER
Other menu operations
To
Press
Adjust the setting value
V, v, B or b.
Move to the next/previous menu level
B or b.
Cancel the menu
MENU.
Tips
• If you want to exit from Menu level 2 to Menu level 1, press V or v until
the return icon (
) is highlighted, then press ENTER.
• Some of the menu items can be operated directly using the remote
buttons.
• The MENU, ENTER, and SELECT / buttons on the TV can also be used
for the operations above.
Front of TV
ENTER
MENU
AUTO
PROGR
SELECT
PROGR
Note
• If more than 60 seconds elapse between entries, the menu screen
automatically disappears.
24
Adjusting Your Setup (MENU)
Changing the
“PICTURE” setting
MENU
PIC MODE
PIP PROGR
MENU
V/v/B/b/ENTER
ENTER
FAVORITE
The “PICTURE” menu allows you to adjust
the picture settings.
1
2
3
RESET
PIP PROGR
SOUND
MODE SURROUND
Press MENU.
Make sure the “PICTURE”
icon ( ) is selected,
then press ENTER.
Press V or v to select
the desired item
(e.g., “DRC-MF”),
then press ENTER.
ENTER
ENTER
b
ENTER
b
b
P I C T URE
DRC - MF : DRC 1 2 5 0
P I C T URE MODE : DYNAM I C
WI DE MODE : OF F
GAME MODE : OF F
P I C T URE
DRC 1 2 5 0
DRC - MF :
P I C T URE MOD PROGRESSIVE
WI DE MODE : O
GAME MODE : O
To
“DRC-MF”
choose either “DRC1250” or “PROGRESSIVE”.
“PICTURE MODE”
choose either “DYNAMIC”, “STANDARD”, “HI-FINE”,
“PERSONAL”*, or “ADJUST”.
“WIDE MODE”
change the picture size when receiving wide-mode (16:9) picture
signal.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
“GAME MODE”
adjust the picture setting that is suitable to view video games.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
* When the “PERSONAL” mode is selected, you can receive the last
adjusted picture settings from the “ADJUST” option (see page 26).
Adjusting Your Setup (MENU)
Select
Notes
• For details on the options under “DRC-MF” and “PICTURE MODE”, see
pages 16 and 15 respectively.
• “GAME MODE” is available only when receiving signals through the
t (video input),
(S video input), or
(component video input)
jacks at the front and rear of your TV.
To return to the normal screen
Press MENU.
continued
Adjusting Your Setup (MENU)
25
Changing the “PICTURE” setting (continued)
Adjusting the “ADJUST” items under “PICTURE MODE”
1
Press V or v to select
the desired item
(e.g.,“COLOR”),
then press ENTER.
ENTER
b
ENTER
b
COLOR
2
Adjust the value according to the following table, then press ENTER.
For
Press v or B to
Press V or b to
“PICTURE” decrease picture contrast
increase picture contrast
“COLOR”
decrease color intensity
increase color intensity
“BRIGHT”
darken the picture
brighten the picture
“HUE”*
increase red picture tones
increase green picture tones
“SHARP”
soften the picture
sharpen the picture
* You can adjust “HUE” for the NTSC color system only.
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
Tip
• For details on the menu system and how to use the menu, refer to
Introducing the menu system on page 22.
26
Adjusting Your Setup (MENU)
80
Changing the
“SOUND” setting
MENU
PIC MODE
PIP PROGR
MENU
V/v/B/b/ENTER
ENTER
FAVORITE
The “SOUND” menu allows you to adjust
the sound settings.
1
Press MENU.
2
Press V or v to select the
“SOUND” icon ( ),
then press ENTER.
3
Press V or v to select
the desired item (e.g.,
“SOUND MODE”),
then press ENTER.
ENTER
ENTER
b
b
RESET
PIP PROGR
SOUND
MODE SURROUND
ENTER
ENTER
b
b
SOUND
SOUND MODE : DYNAM I C
SURROUND : OF F
I N T E L L I GEN T VO L : OF F
SOUND
SOUND MODE : DYNAM I C
SURROUND : OF DRAMA
I N T E L L I GEN T SOF T
P E RSONA L
AD J US T
To
“SOUND MODE”
choose either “DYNAMIC”, “DRAMA”, “SOFT”, “PERSONAL”*, or
“ADJUST”.
“SURROUND”
choose either “TruSurround” or “OFF”.
“INTELLIGENT
VOL”
adjust the volume of all TV programs and video inputs
automatically.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
* When the “PERSONAL” mode is selected, you can receive the last
adjusted sound settings from the “ADJUST” option (see page 28).
Note
• For details on the options under “SOUND MODE” and “SURROUND”,
see pages 15 and 19 respectively.
Adjusting Your Setup (MENU)
Select
To return to the normal screen
Press MENU.
continued
Adjusting Your Setup (MENU)
27
Changing the “SOUND” setting (continued)
Adjusting the “ADJUST” items under “SOUND MODE”
1
Press V or v to select
the desired item (e.g.,
“BALANCE”),
then press ENTER.
ENTER
b
ENTER
b
BALANCE
2
3
Adjust the value according to the following table, then press ENTER .
For
Press v or B to
Press V or b to
“BASS”
decrease the bass
increase the bass.
“TREBLE”
decrease the treble
increase the treble.
“BALANCE”
increase the left speaker’s
volume
increase the right speaker’s volume.
“BBE”
select “HIGH” for higher enhancement of sound clarity;
select “LOW” for lower enhancement of sound clarity;
select “OFF” to turn off the BBE sound.
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
Tip
• For details on the menu system and how to use the menu, refer to
Introducing the menu system on page 22.
28
00
Adjusting Your Setup (MENU)
Changing the
“PIP” setting
0
JUMP
MENU
PIC MODE
PIP PROGR
The “PIP” menu allows you to display a
sub screen, change the sub screen
position and exchange pictures between
the main and sub screens.
1
2
3
MENU
V/v/ENTER
ENTER
FAVORITE
RESET
PIP PROGR
SOUND
MODE SURROUND
Press MENU.
Press V or v to select the
“PIP” icon ( ), then
press ENTER.
Press V or v to select the
desired item (e.g.,
“POSITION”), then
press ENTER.
ENTER
ENTER
b
b
ENTER
ENTER
b
PIP
POS I T I ON :
P I P : OF F
SWA P
b
PIP
POS I T I ON :
P I P : OF F
SWA P
Select
To
“POSITION”
change the position of the sub screen.
Press V or v to select the desired position, then press ENTER .
“PIP”
display a sub screen within the main picture.
Press V or v to select “ON”, then press ENTER .
To cancel, press
or select “OFF”, then press ENTER .
“SWAP”
exchange pictures between the main screen and sub screen.
To return to the normal screen
Press MENU.
Tip
• For details on the menu system and how to use the menu, see Introducing
the menu system on page 22.
Adjusting Your Setup (MENU)
29
Changing the
“SETUP” setting
The “SETUP” menu allows you to
change the menu language, adjust the
picture position, reduce your TV power
consumption, setup your programs and
select the color system.
1
2
3
4
5
6
7
8
9
0
JUMP
Number buttons
MENU
PIC MODE
MENU
PIP PROGR
V/ b/v/B/ENTER
ENTER
FAVORITE
RESET
PIP PROGR
SOUND
MODE SURROUND
1
2
3
Press MENU.
Press V or v to select
the “SETUP” icon ( ),
then press ENTER.
Press V or v to select
the desired item
(e.g., “COLOR SYS”),
then press ENTER.
ENTER
ENTER
b
b
ENTER
ENTER
b
S E T UP
L ANGUAGE : E NG L I SH
P I C ROT A T I ON
ECO MODE : OF F
PROGRAM S E T UP
CO L OR S Y S : AU TO
b
S E T UP
L ANGUAGE : E N
P I C ROT A T I O
ECO MODE : OF
PROGRAM S E T
CO L OR S Y S :
AU TO
PA L
S ECAM
N T SC 3 . 5 8
N T SC 4 . 4 3
Select
To
“LANGUAGE”
change the menu language (see Changing the menu language on page 13).
“PIC ROTATION”
adjust the picture position when it is not aligned with the TV screen.
Press V, b,v or B to adjust the picture position, then press ENTER.
ENTER
b
b
ENTER
PIC ROTATION
“ECO MODE”
reduce power consumption of your TV to save energy.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
“PROGRAM
SETUP”
adjust each channel settings (see Adjusting each channel settings
(PROGRAM SETUP) on page 31).
“COLOR SYS”
select the color system. Normally, set this to “AUTO”.
To return to the normal screen
Press MENU.
30
Adjusting Your Setup (MENU)
Adjusting each channel settings (PROGRAM SETUP)
1
2
3
4
Select “PROGRAM SETUP” from the “SETUP” menu.
Select “PR” and press
ENTER. Press V or v to
select the desired
channel you want to
adjust, then press ENTER.
ENTER
Press V or v to select
the desired item
(e.g., “SKIP”), then
press ENTER.
ENTER
b
b
ENTER
ENTER
b
b
PROGRAM S E T UP
PR : 1 4
S K I P : OF F
CH I L D L OCK : OF F
F A VOR I T E CH : – –
PROGRAM S E T UP
ON
PR : 1 4
SK I P :
OF F
CH I L D L OCK :
F A VOR I T E CH
Select
To
“PR”
select the desired channel.
“SKIP”
skip unwanted or unused program number.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
“CHILD LOCK”
prevent children from watching this selected channel.
Press V or v to select “ON”, then press ENTER.
The lock symbol ( ) appears on the screen.
To cancel, select “OFF”, then press ENTER.
If you preset a locked channel, that channel will be unlocked
automatically.
“FAVORITE CH”
program six channels for direct selection.
Press V or v to select one of the six favorite channel numbers (if
you decide not to make any changes, select “ ”), then press
ENTER.
To view the selected favorite channel, refer page 17.
To continue adjusting other channels, press V or v to select “PR”, then
repeat step 2 and 3.
To return to the normal screen
Press MENU.
Adjusting Your Setup (MENU)
31
Changing the
Channel Preset
(“CH PRESET”)
setting
1
2
3
4
5
6
7
8
9
0
JUMP
MENU
PIC MODE
MENU
PIP PROGR
The “CH PRESET” menu allows you to
adjust the setup of your TV. For
example, you can manually tune in a
channel with a weak signal that fails to
be tuned in by automatic presetting.
1
2
3
V/ b/v/B/ENTER
ENTER
FAVORITE
RESET
PIP PROGR
SOUND
MODE SURROUND
Press MENU.
Press V or v to select the
“CH PRESET” icon (
),
then press ENTER.
Press V or v to select
the desired item (e.g.,
“AUTO PROGRAM”),
then press ENTER.
ENTER
ENTER
b
b
ENTER
ENTER
b
b
CH PRE S E T
AU TO PROGRAM
MANUA L PROGRAM
TV SYS : B / G
AU TO PROGRA M
PR : 0 1
T V S Y S : AU TO
VH F L OW
Select
To
“AUTO PROGRAM”
preset channels automatically.
“MANUAL PROGRAM”
preset channels manually. See Presetting channels
manually on page 33.
“TV SYS”
select the TV system.
Press V or v to select either “B/G”, “I”, “D/K” or “M”, then
press ENTER.
To return to the normal screen
Press MENU.
Tip
• For details on the menu system and how to use the menu, refer to
Introducing the menu system on page 22.
32
Adjusting Your Setup (MENU)
Presetting channels manually
1
After selecting “MANUAL
PROGRAM”, select the
program number to
which you want to preset
a channel.
(1) Make sure “PR” is selected,
then press ENTER.
(2) Press V or v until the
program number you
want to preset (e.g.,
program number
“10”) appears on the
menu, then press ENTER.
ENTER
ENTER
b
ENTER
b
MANUA L PROGRAM
PR : 0 6
TV SYS : B / G
S ENS : H I GH
VH F L OW
F I NE : AU TO
b
MANUA L PROGRAM
PR : 1 0
TV SYS : B / G
S ENS : H I GH
VH F L OW
F I NE : AU TO
b
MANUA L PROGRAM
PR : 1 0
TV SYS : B / G
S ENS : H I GH
VH F L OW
F I NE : AU TO
b
MANUA L PROGRAM
PR : 1 0
TV SYS : B / G
S ENS : H I GH
VH F L OW
F I NE : AU TO
b
MANUA L PROGRAM
PR : 1 0
B/G
TV SYS :
I
S ENS : H I G D / K
VH F L OW
M
F I NE : AU TO
Tip
• You can also select the
program number with the
PROGR +/– or number
buttons.
2
Select the desired channel.
(1) Press V or v to select
either “VHF LOW”,
“VHF HIGH”,
or “UHF”, then
press ENTER.
(2) Press V or v until the
desired channel’s
broadcast appears
on the TV screen,
then press ENTER.
3
ENTER
ENTER
If the sound of the
desired channel is
abnormal, select the
appropriate TV system.
ENTER
(1) Press V or v to
select “TV SYS”,
then press ENTER.
(2) Press V or v until
the sound becomes
normal, then
press ENTER.
ENTER
b
b
b
b
ENTER
ENTER
ENTER
ENTER
b
MANUA L PROGRAM
PR : 1 0
TV SYS : I
S ENS : H I GH
VH F L OW
F I NE : AU TO
continued
Adjusting Your Setup (MENU)
33
Changing the “CH PRESET” setting (continued)
4
If you are not satisfied with
the picture and sound
quality, you may be able to
improve them by using the
“FINE” tuning feature.
(1) Press V or v
to select “FINE”,
then press ENTER.
ENTER
(2) Press V or v to select
“MANUAL”, then
press ENTER.
(3) Press V, v, B or b
until the picture
and sound quality
are optimal, then
press ENTER.
The + or – icon on
the menu flashes
while tuning.
5
ENTER
ENTER
b
b
b
ENTER
ENTER
ENTER
b
b
MANUA L PROGRAM
PR : 1 0
AU TO
MANUA L
TV SYS : I
S ENS : H I G
VH F L OW
F I NE :
b
MANUA L PROGRAM
PR : 1 0
TV SYS : I
S ENS : H I GH
VH F L OW
F I NE : MA NUA L
If the TV signal is too
strong and the picture is
distorted, you can adjust
the TV reception
sensitivity.
(1) Press V or v to
SENS”,
select “
then press ENTER.
(2) Press V or v to
select “LOW”,
then press ENTER.
ENTER
ENTER
b
b
ENTER
ENTER
MANUA L PROGRAM
PR : 1 0
AU TO
TV SYS : I
MANUA L
:
S ENS H I G
VH F L OW
F I NE :
b
b
MANUA L PROGRAM
PR : 1 0
H I GH
TV SYS : I
L OW
S ENS :
VH F L OW
F I NE : MA NU A L
MANUA L PROGRAM
PR : 1 0
TV SYS : I
S ENS : L OW
VH F L OW
F I NE : MA NU A L
To return to the normal screen
Press MENU.
Notes
• The TV system (“TV SYS”), TV reception sensitivity (“
SENS”) and fine
tuning (“FINE”) settings are memorized for each program number.
• If you preset a locked channel (“CHILD LOCK”), that channel will be
unlocked automatically (see page 31).
34
Adjusting Your Setup (MENU)
Additional Information
Self-diagnosis function
Your TV is equipped with a self-diagnosis function. If there is a
problem with your TV, the 1 (standby) indicator flashes red. The
number of times the 1 indicator flashes indicates the possible
causes.
Front of TV
L(MONO)
4
1 indicator
R
ENTER
MENU
AUTO
PROGR
SELECT
PROGR
1
Check that the 1 indicator flashes red a number of times between 3-second
intervals.
2
3
4
Count the number of times the 1 indicator flashes.
Press ! (main power) to turn off your TV.
Additional Information
Additional Information
Inform your nearest Sony service center about the number of times the
1 indicator flashed.
Be sure to note the model name and serial number located on the rear of
your TV.
35
Troubleshooting
If you have any problem while viewing your TV, you can either use the Reset function or
check the Troubleshooting guide below. If the problem persists, contact your Sony dealer.
Reset function
Press the RESET button on your remote control.
Your TV will go blank for about half a second
then the picture will reappear with “RESET”
displayed on your TV screen for about 10 seconds.
Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.
MENU
PIC MODE
PIP PROGR
ENTER
FAVORITE
RESET
PIP PROGR
RESET
SOUND
Troubleshooting guide
Symptom
Snowy picture
Noisy sound
Distorted picture
Possible cause
• The connection is
loose or the cable is
damaged.
• Channel presetting
is inappropriate or
incomplete.
• The antenna type is
inappropriate.
• The antenna
direction needs
adjustment.
Solutions
• Check the antenna cable and
connection on the TV, VCR and at the
wall.
• Display the “CH PRESET” menu and
select “MANUAL PROGRAM” to
preset the channel again.
Page
4
33
• Check the antenna type (VHF/UHF).
Contact a Sony dealer for advice.
• Adjust the antenna direction. Contact
a Sony dealer for advice.
–
• Signal transmission is
low.
• Try using a booster.
–
• Broadcast signals
are too strong.
• Display the “CH PRESET” menu and
select “MANUAL PROGRAM”.
Then, select “
SENS: LOW”.
• Turn off or disconnect the booster if it
is in use.
34
• If the sound of all the channels are noisy,
display the “CH PRESET” menu and
select “AUTO PROGRAM” to preset the
channels again.
32
• If the sound of some channels is noisy,
select the channel, then display the
“CH PRESET” menu and select the
appropriate TV system (“TV SYS”).
33
–
–
Noisy sound
Good picture
• The TV system
setting or channel
presetting is
inappropriate or
incomplete.
Noisy sound
36
Additional Information
Symptom
No picture
Possible cause
• The power cord,
antenna or VCR is
not connected.
• The TV is not turned
on.
Page
• Check the power cord, antenna and
the VCR connections.
4
• Press ?/1 (power).
11
• Press ! (main power) on the TV to
turn off the TV for about five
seconds, then turn it on again.
12
• The volume level is
too low.
• Press ¸ + to increase the volume
level.
12
• The sound is muted.
• Press % to cancel the muting.
12
• There is local
interference from
cars, neon signs, hair
dryers, power
generators, etc.
• Do not use a hair dryer or other
equipment near the TV.
–
• Adjust the antenna direction for
minimum interference. Contact a
Sony dealer for advice.
–
• Broadcast signals are
reflected by nearby
mountains or buildings.
• Use a highly directional antenna.
–
• Use the fine tuning (“FINE”) function.
34
• The antenna direction
needs adjustment.
• Adjust the antenna direction. Contact
a Sony dealer for advice.
–
• Use of a booster is
inappropriate.
• Turn off or disconnect the booster if it
is in use.
–
• The color level
setting is too low.
• Display the “PICTURE” menu and select
“ADJUST” of “PICTURE MODE”, then
adjust the “COLOR” level.
26
• The color system setting
is inappropriate.
• Display the “SETUP” menu and check
the color system (“COLOR SYS”) setting
(usually set this to “AUTO”).
30
• The antenna direction
needs adjustment.
• Adjust the antenna direction. Contact
a Sony dealer for advice.
–
No sound
Good picture
Solutions
No sound
Dotted lines or
stripes
Double images or
“ghosts”
No color
continued
Additional Information
37
Troubleshooting (continued)
Symptom
Solutions
Page
Abnormal color
patches
• The magnetic
disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
• Keep external speakers or other
equipment away from the TV. Do not
move the TV while the TV is turned
on. Press ! (main power) on the TV
to turn off the TV for about five
minutes, then turn it on again.
–
Picture slant
• The magnetic
disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
• Keep external speakers or other
electrical equipment away from the TV.
–
• Display the “SETUP” menu and adjust
“PIC ROTATION” so that the picture is
aligned to the TV screen.
30
Lines moving across
the TV screen.
• There is interference
from external sources,
e.g., heavy
machineries, nearby
broadcast station.
• Use the fine tuning (“FINE”) function.
34
The 1 indicator on
your TV flashes red
a number of times
between 3-second
intervals.
• Your TV may need
servicing.
• Contact your nearest Sony service
center.
35
Cannot play
shooting games.
• Some shooting games
which involve pointing
a light beam at the TV
screen with an
electronic gun or rifle
cannot be used with
your TV. For detail, see
the instruction manual
supplied with the
video game software.
—
–
• Changes in room
temperature sometimes
make the TV cabinet
expand or contract,
causing a noise. This
does not indicate a
malfunction.
—
–
• The TV’s
demagnetizing
function is working.
This does not indicate
a malfunction.
—
–
TV cabinet creaks.
A small “boom”
sound is heard
when the TV is
turned on.
38
Possible cause
Additional Information
Overview of controls
TV front panel
L(MONO)
4
L(MONO)
R
R
ENTER
MENU
SELECT
AUTO
PROGR
ENTER
4
MENU
Button
PROGR
SELECT
AUTO
PROGR
PROGR
Function
Page
AUTO PROGR
Preset channels automatically.
5
!
Turn off completely or
turn on the TV.
11
PROGR +/–
Select program number.
11
1
Standby indicator.
11
2 +/–
t
Adjust volume.
12
MENU
i
Select TV or video input.
12
Wake Up indicator.
14
Display the menu.
24
Headphone jack.
–
continued
Additional Information
39
Overview of controls (continued)
Remote control
DRC-MF
1
2
3
4
5
6
7
8
9
0
JUMP
Button function
White
For general TV operations
Green
For Teletext operations
Yellow
For PIP operations
?/1
PIP PROGR
ENTER
FAVORITE
Label color
Button
MENU
PIC MODE
The names/symbols of buttons on the remote are
indicated in different colors to represent the available
functions.
RESET
PIP PROGR
SOUND
MODE SURROUND
PROGR +/–
0 – 9, %
a
t
2 +/–
JUMP
Timer operations
PROGR
SOUND MODE
PIC MODE
DRC-MF
VIDEO
TITLE
Function
Page
Turn off temporarily or
turn on the TV.
Select program number.
Input numbers.
Display on-screen information.
Mute the sound.
Display the TV program.
Select TV or video input.
Adjust volume.
Jump to previous channel.
11
11
11
12
12
12
12
12
12
Set TV to turn on automatically.
Set TV to turn off automatically.
Select sound mode.
Select picture mode.
Select DRC-MF mode.
14
14
15
15
16
Favorite Channel operations
Display favorite channels.
FAVORITE
1–6
17
Select desired channel.
17
Display a sub screen.
18
Change programs in the sub
screen.
Select video input for the sub
screen.
Swap main and sub screens.
Freeze the sub screen.
18
PIP operations
TV
40
Additional Information
V (PIP PROGR +) /
v (PIP PROGR –)
18
18
18
Button
Function
Page
DRC-MF
Select surround mode.
SURROUND
Stereo/bilingual operations
(not used for KV-EX34M87/EX29M87)
Select stereo/bilingual mode.
A/B
Teletext operations
(not used for KV-EX34M87/EX29M87)
1
2
3
4
5
6
7
8
9
0
JUMP
MENU
PIC MODE
PIP PROGR
0-9
PROGR +/–
(red, green,
yellow, blue)
ENTER
FAVORITE
19
–
Display Teletext broadcast.
Display Teletext service contents.
Stop Teletext display from scrolling.
Reveal concealed information.
Enlarge the Teletext display.
Show TV screen while waiting
for Teletext page.
Input Teletext page number.
Display the next or previous page.
–
–
–
–
–
–
Access a FASTEXT menu.
–
–
–
RESET
PIP PROGR
SOUND
MODE SURROUND
PROGR
Optional components operations
Power.
VIDEO ?/1
Display the title menu.
TITLE
N
>
VIDEO
TITLE
TV
.
z
x
X
Menu operations
MENU
V, v, B, b
ENTER
RESET
Play.
Fast forward/Search forward.
Rewind/Search backward.
Record.
Stop.
Pause.
21
21
21
21
21
21
21
21
Display the menu.
Select and adjust items.
24
24
Confirm selected items.
24
Set TV to factory setting.
36
Additional Information
41
Specifications
KV-EX29M87
KV-EX34M87
Power requirements
110-240 V AC, 50/60 Hz
Power consumption (W)
Indicated on the rear of the TV
Television system
B/G, I, D/K, M
Color system
PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58
Channel coverage
B/G
VHF : E2 to E12 / UHF : E21 to E69 / CATV : S01 to
S03, S1 to S41
I
UHF : B21 to B68 / CATV : S01 to S03, S1 to S41
D/K
VHF : C1 to C12, R1 to R12 / UHF : C13 to C57, R21
to R60 / CATV : S01 to S03, S1 to S41, Z1 to Z39
VHF : A2 to A13 / UHF : A14 to A79/
CATV : A-8 to A-2, A to W+4, W+6 to W+84
M
8 (Antenna)
75-ohm external terminal
Audio output (Speaker)
6W + 6W
3D WOOFER
15W
Number of terminal
(Video)
(Audio)
Input: 4
Output: 1
Phono jacks; 1 Vp-p, 75 ohms
Input: 4
Input: 2
Output: 1
Phono jacks; 500 mVrms
Y: 1 Vp-p, 75 ohms,
unbalanced, sync negative
C: 0.286 Vp-p, 75 ohms
(S Video)
(Component
Video)
i (Headphone)
Input: 1
Phono jacks;
Y: 1 Vp-p, 75 ohms,
sync negative
CB: 0.7 Vp-p, 75 ohms
CR: 0.7 Vp-p, 75 ohms
Audio: 500 mVrms
Output: 1
Stereo minijack
29 in.
34 in.
Tube size (cm)
72
86
Measured diagonally
Screen size (cm)
68
80
Measured diagonally
772 × 603 × 516
895 × 700 × 590
56
84
Picture tube
Dimensions (w/h/d, mm)
Mass (kg)
Design and specifications are subject to change without notice.
Sony Corporation
42
Note
Additional Information
Download PDF

advertising