Sony LUMA LMD-1751W User's manual

Sony LUMA LMD-1751W User's manual
The monitor stand is an optional.
Professional LCD Monitor
LMD-1751W
Inheriting the vital functions and performance of Sony’s highly acclaimed LUMA Series professional monitors,
the LMD-1751W is the latest enhancement to this series, an outstanding new high-grade LCD video monitor.
The LMD-1751W is a 17-inch (431 mm)*1 multi-format, rack-mountable HD video monitor, incorporating a
wide viewing angle LCD panel, high-purity color filters, sophisticated 10-bit signal processing, and Sony’s
unique ChromaTRU*2 color matching technology. With these qualities, the LMD-1751W delivers precise
images and accurate color reproduction for professional video monitoring. Added to this, a newly
supported white balance calibration function*3 allows quick and simple monitor adjustment and matching.
Another advantage of the LMD-1751W is its 3G-SDI interface. Using an optional 3G-SDI input adaptor,
the BKM-250TG, Y/Cb/Cr 4:2:2, 1080/50P, and 1080/60P signals are accepted with a single cable.
With the strength of Sony’s video expertise, the LMD-1751W is sure to meet a wide variety of picture
monitoring applications from broadcast and post-production to event production and mobile truck
installations, in both AC and DC operating environments.
*1 Viewable area measured diagonally.
*2 ChromaTRU technology offers accurate gamma and stable white balance.
*3 This function works with the combination of a PC and a commercially available calibration tool (X-Rite i1).
FEATURES
■■ Superb Picture Performance
Picture Delay Minimum Mode
Audio is just as much a part of the show as video, and timing
is always an issue.
Picture Delay Minimum mode is selectable to minimize I/P
conversion times for audio synchronization during editing.
By selecting “LINE DOUBLER” under “IP MODE”, the signal
processing (I/P conversion) period is less than one field
(0.5 frame).
High Purity Color Filters
The LMD-1751W uses precisely manufactured RGB color filters,
allowing the reproduction of colors with stunning depth and
saturation to create highly natural images.
Accurate Gamma and Stable White Balance
– ChromaTRU™ Color Processing
Signal
For an extra level of color-reproduction
accuracy, every LCD panel used in the
LMD-1751W is precisely color calibrated at the factory,
providing characteristics consistent with those of CRT displays.
The colorimetry of an LCD display, by nature, can exhibit
inaccurate R, G, B color coordinates and unbalanced R, G, B
gamma curves, which can make precise color matching
between multiple monitors a challenge. These are also the
primary reasons why LCD color tone can differ slightly from
CRT tone. The LMD-1751W solves this problem by precisely
calibrating each LCD panel’s light output so that the R, G, B
color coordinates are virtually the same as those of a CRT
monitor.
A second calibration is further applied so that white balance
is maintained at a consistent color temperature throughout
all grayscale levels. The result of these precise calibrations is
excellent color reproduction reminiscent of Sony’s CRT displays.
CIE Color Coordinates
0.55
Orange yellow
Green
Yellow green Yellow
0.50
Bluish green
CRT
Dark skin
Foliage
Light skin
Whlite
Cyan
Blue flower
Blue
0.25
0.20
0.15
0.15
0.20
I/P conbersion by
“LINE DOUBLER ” mode
(No need to wait for
the next field to come)
Signal
Processing
period is less
than 1 field.
After I/P
conversion
Extremely Wide Viewing Angle
The LMD-1751W offers stable images when viewed from
various angles. It delivers wide viewing angles both horizontally
and vertically, with virtually no reduction in picture contrast,
color saturation, or hue shift. This allows precise images to be
clearly viewed from various positions and angles – a critical
requirement in professional video monitoring.
High-grade LUMA monitors are adjusted at the factory to
achieve optimized color, brightness, and gamma prior to
shipment. LCD monitor performance, however, typically
changes over time and requires regular recalibration to
maintain its original performance.
The LMD-1751W employs a software-based white balance
calibration function, which is called AutoWhiteBalance.
Combined with a commercially available calibration tool*,
this function enables simple adjustment of the monitor’s
white balance.
Purplish blue
CRT (Sony CRT)
ChromaTRU
Interlaced
signal
Magenta
0.35
0.10
Field 5
■■ White Balance Calibration Function
Moderate red
Blue sky
0.30
Field 2
Field 4
LCD
Red
Purple
v'
Field 1
Field 3
Orange
0.45
0.40
Flow
0.25
0.30
0.35
u'
LCD (Sony LUMA-LCD Panel)
Sony LUMA-LCD Panel
0.40
0.45
0.50
* The X-Rite Eye-one (i1) Series.
ITU-R BT.709
Sophisticated I/P Conversion
The LMD-1751W uses a motion-adaptive I/P-conversion process
to achieve conversion results that are optimized to the picture
content – whether the image is static or dynamic. Highly
accurate I/P conversion is provided regardless of signal
resolution including both HD and SD inputs.
In addition, the LMD-2451W
can be upgraded to
support white balance
calibration.
The LMD-1751W with a PC and
X-Rite Eye-one(i1).
■■ Input Versatility
■■ External Remote Control Function
Multi-format Signal Support – Up to 3G-SDI Input
The LMD-1751W has an external remote control capability for
input/output signal selection and adjustment of various items
via Ethernet (10BASE-T/100BASE-TX) connection. Up to 32
monitors and up to four control units can be connected via
Ethernet (10BASE-T/100BASE-TX) connection and controlled
remotely on the network. The user can control individual
monitors or monitor groups simply by entering the monitor ID
or group ID number. They can also execute the same
operation on all connected monitors, or put all connected
monitors into the same setup and adjustment state.
The LMD-1751W accepts almost any SD or HD video format,
both analog and digital: NTSC and PAL, component 480/60i
and 575/50i, progressive 480/60P and 576/50P, and highdefinition 1080/60i, 1080/50i, 720/60P, 1080/24P, 1080/25P,
1080/30P, 1080/24PsF, and 1080/25PsF. It also accepts
1080/50P and 1080/60P formats from a 3G-SDI input.
In addition to the standard interfaces that cover composite,
Y/C, RGB, and component, there are two optional input slots.
Input connector configuration can be easily modified by
installing optional input adaptors into these slots.
Analog and digital computer signals via the standard HD-15
and DVI-D*1 interfaces are also supported.
*1 Both 1080/50P and 1080/60P
signals are accepted. The images
are down-converted for display on
the LMD-1751W.
■■ Power-saving Mode
In Power-saving mode, when no input signal is received for
over a minute, the monitor goes into Standby mode and
consumes minimal power. This function prevents unnecessary
electrical consumption.
■■ Other Features
■■ Convenient Installation
Mounting Flexibility
Mountable in a 19-inch EIA Standard Rack
The LMD-1751W (7U high) can be rack mounted using an
optional MB-530 Mounting Bracket. Complying with VESA
standards, LMD-1751W monitors can be easily mounted on
walls and ceilings.
• Wave Form Monitor and Audio Level Meter*1 windows
• Picture-by-Picture mode
• H/V Delay function
• ACC Off
• DC operation (12V)
• Setup Level for Analog Component and NTSC signals
• Sub Control on Contrast, Chroma, Phase, and Brightness
• Blue-only mode
• Monochrome mode
• Auto Chroma/Phase setup
• DVI-D input
• DDC-2B
• Color temperature
• Scan mode selection
• Smart APA
• Stereo audio monitoring
• Protected controls
• Closed-caption decoder with an optional BKM-244CC
• Advanced marker setting
*1 Only embedded audio is supported.
The LMD-1751W with an optional
MB-530 Mounting Bracket
The LMD-1751W
with an optional stand, SU-561.
DC in
Optional
Output
Standard
Option input slot
Composite
Y/C
RGB, Component
External Sync
Audo monitor out
Speaker (Built-in)
General
Power Requirement
Power Consumptio
Operating Temperature
Recommended Operation Temperature
Operating Humidity
Storage & Transport Temperature
Storage & Transport Humidity
Operating/Storage/Trans. Pressure
Dimensions (W x H x D)
without stand
with optional stand
Display Stand (W x H x D)
SU-561(Option)
Mass
without stand and board
with optional stand and
boards
Supplied Accessories
Distributed by
MK10641V1IW09NOV
BNC (x1), Loop-through, with 75 ohms automatic termination
Mini DIN 4-pin (x1) Loop-through,
with 75 ohms automatic termination
BNC (x3), Loop-through,
with with 75 ohms automatic termination
BNC (x1), Loop-through, with 75 ohms automatic termination
Phono jack (x2) (L, R)
1 W + 1 W (stereo)
AC 100 V to 240 V 50/60 Hz 0.8A to 0.4 A, DC 12 V, 5.7 A
Maximum Approx. 77 W (with 2 x BKM-229X)
0°C to 35°C (32°F to 95°F)
20°C to 30°C (68°F to 86°F)
30% to 85% (No condensation)
-20°C to +60°C (-4°F to +140°F)
0% to 90%
700 hPa to 1060 hPa
BKM-220D
NTSC/PAL Input Adaptor
SD-SDI 4:2:2 Input Adaptor
MB-530
SU-561
Mounting Bracket
Monitor Stand
DIMENSIONS
5°*
439.5 (17 3/8)
100.0 (4)
AC power cord (1), AC plug holder (1),
Operating Instructions (1), CD-ROM (1),
Using the CD-ROM Manual (1), Warranty book (1)
10°*
*Tilt angle
269.9 (10 3/4)
75.0 (3)
439.5 x 284 x 105.0 mm (17 3/8 x 11 1/4 x 4 1/4 inches)
439.5 x 385.7 x 269.9 mm (12 5/8 x 14 3/8 x 10 3/4 inches)
320.0 x 364.0 x 269.9 mm (12 5/8 x 14 3/8 x 10 3/4 inches)
Approx. 6.3 kg ( 13 lb 14 oz)
Approx. 8.8 kg ( 19 lb 6 oz) with BKM-229X (x2)
105.0 (4 1/4)
364.0 (14 3/8)
Serial remote (LAN)
BKM-227W
Analog Component
Adaptor
284.0 (11 1/4)
DVI-D
Parallel remote
BKM-229X
385.7 (15 1/4)
Audio
HD15
HD/SD-SDI Input Adaptor
With optional SU-561
Monitor Stand
64.4
(2 5/8) 100.0 (4)
External Sync
BKM-243HS
HD/SD-SDI Closed
Caption Adaptor
22.8 (29/32)
RGB, Component
BNC (x1), 1.0 Vp-p ±3dB sync negative
Mini DIN 4-pin (x1)
Y: 1.0 Vp-p ± 3dB sync negative,
C: 0.286 Vp-p ± 3dB (NTSC burst signal level),
0.3 Vp-p ± 3dB (PAL burst signal level)
BNC (x3)
RGB : 0.7 Vp-p ± 3dB (Sync On Green, 0.3 Vp-p sync negative)
Component : 0.7 Vp-p ± 3dB
(75% chrominance standard color bar signal)
BNC (x1)
0.3 to 4.0 Vp-p ± bipolarity ternary or negative polarity binary
Phono jack (x2) (L, R) -5 dBu 47 kilo ohms or higher
D-sub 15-pin (x1),
R/G/B: 0.7 Vp-p sync positive
(Sync On Green, 0.3 Vp-p sync negative)
Sync : Total level
(polarity free, H/V separate and composite sync)
Plug & Play function : corresponds to DDC-2B
TMDS single link
Modular connector 8-pin (x1)
(pin assignment at users’ allocation)
D-sub 9-pin (RS-232C) (x1),
RJ-45 modular connector (ETHERNET) (x1)
(10BASE-T/100BASE-TX)
XLR type 4-pin (x1) DC 12 V
(output impedance 0.05 ohms or less)
2 slots (for HD-SDI, SDI capability and extra analog I/O’s)
BKM-244CC
3G/HD/SD-SDI
Input Adaptor
75.0 (3)
Composite
Y/C
BKM-250TG
54.1(2 1/4)
Input
Standard
a-Si TFT Active Matrix LCD
1280 x 768
Approx. 369.6 x 221.8 mm
(Approx. 14 5/8 x 8 3/4 inches)
Approx. 431.1 mm (17 inches)
15:9
Approx 16,770,000 colors
85°/85°/85°/85°
(typical) (up/down/left/right contrast>10:1)
OPTIONAL Accessories
100.0 (4)
Picture Performance
Type
Resolution (pixels)
Picture Size (H x W)
(Viewable area)
(Diagonal)
Aspect
Colors
Viewing Angle
284.0 (11 1/4)
SPECIFICATIONS
Unit: mm (inches)
© 2009 Sony Corporation. All rights reserved.
Reproduction in whole or in part without permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Images on monitors are simulated.
Sony, ChromaTRU and LUMA are trademarks of Sony Corporation.
All other trademarks are the property of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement