3G Access Power Solutions - APS6
Eaton DC Power Solutions
3G Access Power Solutions APS6-600 Series
Features
 19” sub-rack
 Compact 6U system
 Up to 6 rectifier modules
 Pre-configured software
 High power density (48V: 360A, 6U, 19”)
 Multiple AC option (1Ø, 3Ø, 2Ø)
 Fast on-line expansion of rectifiers (hot-swap)
 High efficiency and unity power factor
 Priority and non priority options for DC distributions
 Compatible with Eaton’s Network Energy Saver (ES) Rectifier
48V secure DC power up to
18kW.
The Eaton® 3G Access Power
Solutions are ideal for low to
medium power telecommunications applications, offering
compact, efficient, flexible and
reliable secure DC power
supply.
This 19” rack mount system is
available with up to 6 of the
Eaton 3G, NPR48-ES Network
power rectifier modules with a
total output up to 360A. For
superior operating efficiency to
further reduce operating costs,
this system is offered as
standard with Eaton Energy
Saver (ES) Network power
rectifier which provides
operating efficiency in excess
of 96%.
The systems include an integral
DC distribution panel with a
range of MCB and Low Voltage
Disconnect (LVD) options
available.
The SC200 series of system
controller offers highly
advanced control and
monitoring features including
Smart Alarms – a configurable
logic for automated site energy
control. The SC200 also offers a
complete array of
communications options with
Ethernet, GSM cellular
(including text messaging),
standard modem and TCP/IP
communications options. The
slightly lower specification
SC100 is also available.
Typical applications include
providing secure power for
customer premises equipment,
roadside terminals, data
networks and IP routers. The
3G Access Power Solutions are
pre-configured and all system
settings are fully adjustable in
software and stored in
transferable configuration files
for repeatable and quick onestep system set-up.
Technical Specifications
Input
AC Supply†
Power Factor†
Efficiency†
Output
DC Output
Voltage Range
DC Output
Power
(maximum)*
Environmental
Operating
Temperature
Range*
Mechanical
Dimensions
H,W,D
System
System
Controller
DC Distribution
Module
Communication
Features
Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
Options
100 – 240V, 50 – 60Hz (nominal)
185 – 275V full power output up to 50°C [122°F]
90 – 185V reduced power output
>0.99 (50 – 100% Output Current)
NPR48-ES : >96% peak,
>95% (20% to 100% load, 230Vac)
43.2-57.5V
Software
DCTools
PowerManagerII
Configuration software.
Free download from:
www.powerware.com/downloads
Remote control and monitoring software
Certifications
CE
In the interests of continual product improvement all specifications are
subject to change without notice.
48V: 18kW
* Ratings are stated without LVDs fitted. In some
cases lower ratings may result when LVDs are
used. Refer to installation guide for detailed load
specs and MCB derating factors.
-40°C to +70°C [-40°F to +158°F]
* Refer to rectifier data sheet for more information.
Output current is derated above 50°C [122°F] and
below -10°C [14°F]
6U, 19” mounting, 335mm [13.2”]*
* Additional clear space is required for exhaust air.
SC200, Option for SC100
20-way circuit breakers
(4 x battery, 16 x load)
USB direct*
10BaseT Ethernet*, TCP/IP*, SNMP*, ModbusTCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem
not included)
*SC200 only
Optional 400A LVDs for battery or load, or both.
For unused rectifier positions
External Surge Protection
† Power factor, efficiency, AC voltage range and output power are
dependent on the rectifier module. Refer to the rectifier data sheet for
more information.
.
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names,
trademarks, and/or service marks of
Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are
property of their respective owners.
Email: [email protected]
Internet: www.dcpower.eaton.com
© 2014 Eaton Corporation All Rights
Reserved APS6-600 A1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement