Sony PEG-N760C User manual

Sony PEG-N760C User manual
4-657-550-11(1)
Chapter 1
Playing audio files
(Audio Player)
Chapter 2
Add-on
Application
Guide
Viewing image files
(PictureGear Pocket)
Chapter 3
Playing a movie
(gMovie player)
Chapter 4
Setting the Memory
Stick automatic start
function (MS Autorun)
Personal Entertainment Organizer
Chapter 5
Copying the data to the
Memory Stick media on
your CLIÉ handheld
(MS Import/Export)
PEG-N760C
Chapter 6
Troubleshooting
© 2001 Sony Corporation
On the supplied software
• Copyright laws prohibit reproducing
the software or the software manual in
whole or in part, or renting the software
without the permission of the copyright
holder.
• In no event will SONY be liable for any
financial damage or loss of profits,
including claims made by third parties,
arising out of the use of the software
supplied with this player.
• In the event a problem occurs with this
software as a result of defective
manufacturing, SONY will replace it at
SONY’s option or issue a refund.
However, SONY bears no other
responsibility.
• The software provided with this player
cannot be used with equipment other
than that which it is designated for use
with.
• Please note that, due to continued
efforts to improve quality, the software
specifications may be changed without
notice.
Program © 2001 Sony Corporation, © 2001
Palm, Inc. or its subsidiaries. All rights
reserved.
Documentation © 2001 Sony Corporation
Sony, Memory Stick, the Memory Stick logo,
Jog Dial, OpenMG, and PictureGear are
trademarks of Sony Corporation.
Walkman is a registered trademark of Sony
Corporation
Graffiti, HotSync, PalmModem, and Palm
OS are registered trademarks, and the
HotSync logo and Palm are trademarks of
Palm, Inc. or its subsidiaries.
IBM and PC/AT are registered trademarks
of International Business Machines
Corporation.
Microsoft, Windows, Windows NT, Outlook
and the Windows 98 logo are registered
trademarks of Microsoft Corporation.
MMX and Pentium are registered
trademarks of Intel Corporation.
AvantGo, the AvantGo Client and the
AvantGo logo are registered trademarks of
AvantGo, Inc.
Pumatech, the Pumatech logo, Intellisync
and Intellisync Lite are trademarks of
Pumatech, Inc. that may be registered in
some jurisdictions.
Adobe and Adobe Acrobat Reader are
trademarks of Adobe Systems Incorporated.
QuickTime and the QuickTime logo are
trademarks used under license. QuickTime
is registered in the U.S. and other countries.
This product includes fonts owned by
TypeBank Co., Ltd. under license.
RealJukebox is copyrighted by
RealNetworks, Inc.
All other trademarks are trademarks of their
respective owners.
CAUTION
Please contact your nearest Sony dealer
regarding the problem you are experiencing
with your Sony product.
2
Table of Contents
Chapter 1
Playing audio files (Audio Player)
What you can do with the
Audio Player ..................................... 8
To enjoy MP3 format audio files on
your CLIÉ handheld ............................ 9
To enjoy ATRAC3 format audio files
managed by OpenMG Jukebox
on your CLIÉ handheld ..................... 10
Installing audio software ............... 11
System requirements ....................... 11
Installing RealJukebox for Sony
software .......................................... 12
Installing OpenMG Jukebox software 14
Importing audio files into your
computer ........................................ 17
If you manage your audio files with
RealJukebox software ...................... 17
If you manage your audio files with
OpenMG Jukebox software .............. 19
Transferring audio files from your
computer to your CLIÉ handheld ... 27
Preparing your CLIÉ handheld, and
placing it on the cradle .................... 27
Transferring MP3 format audio files
to your CLIÉ handheld ..................... 29
Playing audio files on your CLIÉ
handheld ........................................ 32
Connecting/attaching the supplied
headphones ..................................... 32
Playing audio files ........................... 34
Playing in various modes ................. 37
Selecting playback audio files
(Pick up) .......................................... 38
Switching the display ....................... 39
Switching the Jog Dial navigator
function for Audio Player ................. 40
Playing audio files with the
supplied remote controller ............... 42
Protecting your CLIÉ handheld from
accidental pressure on its controls ... 44
Switching the album
(Custom album) ............................... 45
Changing the background design .. 46
Installing skin files to your CLIÉ
handheld ......................................... 46
Uninstalling skin files from your
CLIÉ handheld ................................. 47
Notes on Memory Stick media ....... 48
Notes on using RealJukebox for Sony 50
Notes on using OpenMG Jukebox .. 51
What is “Check-In/Check-Out”? ...... 51
On copyright protection ................... 52
Differences between the HotSync
operation and the Check-In/Out
procedure ........................................ 53
Transferring songs from your CLIÉ
handheld to your computer
(Check-In) ........................................ 54
Notes on playing audio files ............ 56
Restrictions on copyright
protection by OpenMG .................... 58
Using Help files .............................. 59
How to read the online manual ..... 60
Audio Player menu items ............... 61
Chapter 2
Viewing image files
(PictureGear Pocket)
What you can do with
PictureGear Pocket ........................ 64
Installing ........................................ 65
Installing the PhotoStand application
to your CLIÉ handheld ..................... 65
Installing the PictureGear 4.4Lite
software to your computer .............. 66
3
Viewing image files stored in
your CLIÉ handheld ........................ 67
Transferring image files to your
CLIÉ handheld ................................. 67
Viewing image files with your
CLIÉ handheld ................................. 69
Viewing image files stored in
Memory Stick media ...................... 73
Copying image files ....................... 75
Saving image files stored on your
CLIÉ handheld to a Memory Stick
media (Export) ................................. 75
Saving image files stored on a
Memory Stick media to your CLIÉ
handheld (Import) ............................ 76
Displaying image files one after
another (PhotoStand) .................... 78
Making a PhotoStand setting .......... 78
Starting PhotoStand ........................ 79
Viewing sample image files ........... 80
How to read the online manual ..... 81
PictureGear Pocket menu items ..... 82
Photo list screen .............................. 82
Image file screen ............................. 83
Chapter 3
Playing a movie (gMovie player)
What you can do with the gMovie
player software .............................. 86
Installing ........................................ 87
Install PictureGear 4.4Lite software
to your computer ............................. 87
Playing movies with your CLIÉ
handheld ........................................ 88
Transferring movies to your
CLIÉ handheld ................................. 88
Playing movies ................................. 90
4
Playing sample movie files ............ 92
How to read the online manual ..... 93
gMovie software menu items ........ 94
Media list screen ............................. 94
Movie file screen ............................. 94
Chapter 4
Setting the Memory Stick
automatic start function
(MS Autorun)
What you can do with the
MS Autorun application ................. 98
Setting Auto-run for an
application ................................... 100
How to read the online manual ... 102
Chapter 5
Copying the data to the Memory
Stick media on your CLIÉ handheld
(MS Import/Export)
What you can do with the
MS Import/Export applications .... 104
Installing ...................................... 105
Installing CLIÉ applications using
MS Import/Export ........................ 106
Using your CLIÉ handheld as a
removable disk ............................ 108
How to read the online manual ... 109
Chapter 6
Troubleshooting
Problems for Audio Player ........... 112
On playback ................................... 112
On connection with the computer . 113
Others ............................................ 114
Index ............................................ 116
About this manual
Welcome to the Sony Personal Entertainment Organizer (referred to as
the “Sony CLIÉ Handheld” or “CLIÉ handheld” in this manual).
Your Sony CLIÉ Handheld comes with three manuals:
Read This First
The Read This First manual gives an overview of your CLIÉ
handheld’s features, hardware and software setup, installation
instructions, and other important details. Before reading the other
manuals, read the Read This First manual.
Operating Instructions
The Operating Instructions manual describes all you need to know
about how to use your CLIÉ handheld and the Personal Information
Management (PIM) applications that come with it.
This manual shows you how to:
■ Turn on and off your CLIÉ handheld, reset the CLIÉ handheld, and
enter data in greater detail (Chapter 1)
■ Use the Personal Information Management applications: Date
Book, Address Book, To Do List, Memo Pad, Expense, and
Calculator (Chapter 2)
■ Perform a HotSync operation with your computer (Chapter 3)
■ Exchange data with another handheld by beaming or via Memory
Stick media (Chapter 4)
■ Personalize your CLIÉ handheld with your own preferences
settings (Chapter 5)
■ Maintain your CLIÉ handheld and use the Troubleshooting guide
and other technical information (Chapter 6)
Add-on Applications Guide (this manual)
The Add-on Applications Guide describes how to install and use the
supplied add-on applications which include:
■ Audio Player/OpenMG Jukebox/RealJukebox
■ PictureGear Pocket/PhotoStand/PictureGear 4.4Lite
■ gMovie
■ MS Autorun
■ MS Import/Export
5
6
Playing audio files (Audio Player)
This chapter explains how to play audio files on your CLIÉ
handheld.
Chapter 1
Chapter 1
What you can do with the Audio Player
Audio Player is an application used to play audio files on your CLIÉ
handheld. It is pre-installed on your CLIÉ handheld, so you do not
have to install it.
You can play both MP3 and ATRAC 3 format audio files. In addition,
you can use various playback displays such as Visual Effect view or
List view.
Audio Player Ver.2.1 supports MP3 files that meets the
following specifications.
• Format: MP3 (MPEG-1 Audio Layer-3)
• Sampling frequency: 44.1 kHz
• Bit rate: 32 to 128 kbps
• File extension: .mp3 or .rmp
Note
Depending on the audio file, you may not be able to play some files even if they
meet all the above specifications.
A Memory Stick media is required to play audio files on your
CLIÉ handheld
There are two types of Memory Stick media. One is the standard
Memory Stick media (color: purple), and the other is the MagicGate
Memory Stick media (color: white).
To play ATRAC 3 format audio files on your CLIÉ handheld, you have
to use a MagicGate Memory Stick media. Otherwise, you can use the
standard Memory Stick media.
For details, see “Notes on Memory Stick media” on page 48.
8
Chapter 1
To enjoy MP3 format audio files on your CLIÉ handheld
You need the following applications and media:
• AudioPlayer Version 2.1 application (pre-installed on your CLIÉ
handheld) for managing MP3 format audio file on your CLIÉ
handheld.
Playing audio files (Audio Player)
• Any software for managing MP3 format audio file on your
computer. The RealJukebox 2 Basic for Sony software (hereinafter
referred to as RealJukebox for Sony) is supplied for this use in the
installation CD-ROM.
• A MagicGate Memory Stick media (not supplied) or a standard
Memory Stick media (supplied).
To enjoy MP3 format audio files with your CLIÉ handheld,
follow the steps below.
1
Install any software for managing MP3 format audio file
on your computer.
We recommend RealJukebox for Sony supplied in the way of the
installation CD-ROM. (See page 12)
2
Ready any MP3 audio files on your computer. (See page
17)
To view the software’s manuals or the online help, see page 59.
3
Transfer audio files from your computer to your CLIÉ
handheld. (See page 27)
4
Play audio files on your CLIÉ handheld. (See page 32)
9
What you can do with the Audio Player
To enjoy ATRAC3 format audio files managed by
OpenMG Jukebox on your CLIÉ handheld
You need the following applications and media:
• AudioPlayer Version 2.1 application (pre-installed on your CLIÉ
handheld) for managing ATRAC3 format audio file on your CLIÉ
handheld.
• OpenMG Jukebox software (supplied in the installation CD-ROM)
for managing ATRAC3 format audio file on your computer.
• MagicGate Memory Stick media (not supplied). You cannot use a
standard Memory Stick media for this use.
To enjoy ATRAC3 format audio files managed by OpenMG
Jukebox on your CLIÉ handheld, follow the steps below.
10
1
Install OpenMG Jukebox on your computer. (See page
14)
2
3
Import audio files into your Jukebox. (See page 19)
4
Play audio files on your CLIÉ handheld. (See page 32)
Transfer audio files from your computer to your CLIÉ
handheld. (See page 27)
Installing audio software
You do not have to install Audio Player on your CLIÉ handheld
System requirements
• Operating System: Windows® 98/Windows® 98 Second Edition/
Windows® 2000 Professional/Windows® Me (manufacturer
installed)
The following environments are not supported:
– Windows® 95, Windows NT®
– A system upgraded from Windows® 3.1/95 to Windows® 98/
Windows® 98 Second Edition/Windows® Me
– A dual boot with Windows® 2000 and Windows® 98/Windows® 98
Second Edition/Windows® Me
• Display: High (16 bit) Color or better (800 × 600 pixels or higher)
• Internet access: for Web registration and EMD services
Notes
• We do not assure trouble-free operation for all computers satisfying the
system requirements.
• For the protection of copyrights, when you use a computer with an optical
digital output connector, the optical connector may be disabled during
playback with this software.
11
Playing audio files (Audio Player)
Before installing RealJukebox software and/or OpenMG Jukebox
software, make sure that your computer meets the following hardware
requirements.
• IBM computer PC/AT or Compatible
– CPU: MMX™ Pentium® 233 MHz or higher
– Hard disk drive space: 60 MB or more
– RAM: 64 MB or higher
– CD-ROM drive
– Sound Board
– USB port
Chapter 1
The Audio Player application is factory pre-installed.
Installing audio software
Installing RealJukebox for Sony software
Install the RealJukebox for Sony software to the hard disk of your
computer.
Note
If the “Installing:” message continues to appear without advancing to the next
step for some time, click the “InstallShield Wizard” on the taskbar.
1
Exit all applications and follow the steps below on your
computer.
2
Insert the installation CD-ROM into the CD-ROM drive of
your computer.
The setup program starts automatically.
3
4
5
Click Install CLIÉ Utilities.
Click Install CLIÉ Audio Software.
Click RealJukebox for Sony.
OpenMG installer is displayed, and installation starts.
Follow the instructions displayed on the screen.
6
After the installation is complete, click Restart.
The installation ends and your computer restarts.
Notes
• Do not delete, move, or edit the installed folders using Windows Explorer or
any other application. If you do so, the RealJukebox Basic database may
become unstable or damaged.
• Do not press the Alt key and the Tab key of your computer together during the
installation process.
12
After installing the RealJukebox for Sony software, you need to change
the recording preferences of the RealJukebox for Sony to encode MP3
audio files.
1
Playing audio files (Audio Player)
Double-click the RealJukebox icon on your Windows
desktop, or click Start, point to Programs, Real,
RealJukebox, and then click RealJukebox.
RealJukebox starts.
2
3
4
5
6
Chapter 1
Setting recording preferences
Click Preferences from the Tool menu.
Click the Audio Quality tab.
Click MP3 Audio in the Select a Format group.
Click OK.
Exit the RealJukebox software.
13
Installing audio software
Installing OpenMG Jukebox software
Notes on using OpenMG Jukebox with Windows 2000/
Windows Me
Notes on using OpenMG Jukebox with Windows 2000
OpenMG Jukebox software users with Windows 2000 models should
be aware of the following:
• Only Administrators are allowed to install and uninstall the
OpenMG Jukebox software.
• To use the application, log on with the user name Administrator or
Power User.
• Do not remove or insert a CD-ROM drive connected via a PC card
while OpenMG Jukebox is running.
• Only Windows 2000 Professional Edition is supported.
• Windows 2000 NTFS format is not supported. Use FAT32 format.
Notes on performing the System Restore function of System
Tools on Windows® Millennium Edition
If you perform the System Restore function of System Tools on
Windows® Me, the OpenMG Jukebox database may be damaged and
all music files recorded or imported may not play. Follow the steps
below to back up and restore all audio files managed by OpenMG
Jukebox.
1
Before performing the System Resource function, back
up your audio files by using OpenMG Jukebox Backup
Tool.
This will help prevent unwanted loss of your audio files.
2
After performing the System Resource function, restore
your music files by using OpenMG Jukebox Backup Tool.
This will help ensure the reliability of playback.
For details on using OpenMG Jukebox Backup Tool, refer to the
online help for OpenMG Jukebox.
14
Note
If you already have OpenMG Jukebox installed
If you have the following devices, OpenMG Jukebox Ver.1.x may
already be installed on your computer.
• VAIO Music Clip MC-P10
• Network Walkman NW-E3
• Memory Stick Walkman NW-MS7
Get and install the plug-in files for your devices. To get the plug-in
files, refer to the following Web page.
http://sony.com/walkmanproductsupport
Notes on managing audio files with OpenMG Jukebox Ver. 1.x
• Audio files registered using OpenMG Jukebox Version 1.X can
automatically be converted to Version 2.2, so you can continue to use
them. However, to be on the safe side, it is recommended that you
take a backup of your audio files using the OpenMG Jukebox
Backup Tool.
• Be sure to Check-In any items Checked-Out using OpenMG Jukebox
Version 1.X before upgrading. You may not be able to Check-In an
audio file Checked-Out using OpenMG Jukebox Version 1.X after
the upgrade.
Notes
• After you have installed the OpenMG Jukebox 2.2 for CLIÉ software, do not
install OpenMG Jukebox Version 1.X to overwrite the existing Version 2.2. If
OpenMG Jukebox 2.2 for CLIÉ is overwritten, the registered tracks may be
lost. If such installation accidentally starts, quit the process immediately.
• If you need to install an older version of the software using its CD-ROM after
uninstalling the existing Ver.2.2, make sure to back up audio files first, using
the OpenMG Jukebox Backup Tool so that you will not lose any audio files
registered in OpenMG Jukebox. For details on how to back up your audio
files, see the online help for OpenMG Jukebox.
15
Playing audio files (Audio Player)
To play audio files on your CLIÉ handheld, OpenMG Jukebox 2.2
for CLIÉ is necessary
Chapter 1
If audio files become unplayable because you executed System Restore, an error
dialog box may be displayed when you try to play one. In this case, follow the
messages displayed.
Installing audio software
Installing the OpenMG Jukebox software
Install the OpenMG Jukebox software to the hard disk of your
computer.
Notes
• Be sure to install the software before placing your CLIÉ handheld in the
transfer mode on the cradle. Do not install the software while a dedicated
USB cable is connected to your computer.
• If the “Installing:” message continues to appear without advancing to the next
step for some time, click the “InstallShield Wizard” on the taskbar.
1
Exit all applications and follow the steps below on your
computer.
2
Insert the installation CD-ROM into the CD-ROM drive of
your computer.
The setup program starts automatically.
3
4
5
Click Install CLIÉ Utilities.
Click Install CLIÉ Audio Software.
Click OpenMG Jukebox.
The installation starts.
Follow the instructions displayed on the screen.
If you had already had OpenMG Jukebox Ver.1.x installed
After the installation is complete, click Exit to close the installation program.
Then install the plug-in file according to the instructions on page 15.
6
After the installation is complete, click Restart.
The installation ends and your computer restarts.
Notes
• Do not delete, move, or edit the installed folders using Windows Explorer or
any other application. If you do so, the OpenMG Jukebox database may
become unstable or damaged.
• Do not press the Alt key and the Tab key of your computer together during the
installation process.
16
Importing audio files into your computer
Chapter 1
If you manage your audio files with RealJukebox software
This manual describes the basic operations. For more information
regarding RealJukebox, please refer to the online manual.
• A RealJukebox FAQ and user help section can be found at
http://service.real.com/rjoptions.html
The RealJukebox software is the product of RealNetworks, Inc.
Recording audio CDs onto the hard disk
Audio files recorded and converted into the MP3 format from audio
CDs can be registered on the hard disk to Playlists and managed with
the RealJukebox software.
1
Double-click the RealJukebox icon on your Windows
desktop, or click Start, point to Programs, Real,
RealJukebox, and then click RealJukebox.
RealJukebox starts.
2
Insert the CD you want to record into the CD-ROM drive
of your computer.
The Auto-record dialog box appears.
3
Click “Yes, record the CD now” and then click OK.
Recording starts.
After the recording ends, recorded MP3 format audio files are saved
in the folder.
Continued on next page
17
Playing audio files (Audio Player)
• Support service for RealJukebox is also available through e-mail at
http://service.real.com/help/call.html
Importing audio files into your computer
To pause recording
Click
(Pause).
The recording is paused. To resume recording, click
(Record) again.
When resumed, recording starts from the beginning of the song that
was previously paused.
If you want to record only specific tracks
1
Click “No, I do not record the CD at this time” in step 3
of “Recording audio CDs onto the hard disk” (page 17) .
2
Click to clear the check box of songs that you do not
want to record.
If you accidentally clear the check box of a song that you want to
record, just click the check box again.
3
Click
(Record).
Recording starts and only the selected songs are recorded.
The first time you click
(Record), “Use of Generic CD-ROM
driver” dialog box appears. In this case, click OK. Restart your
computer after updating the driver.
18
Note
Do not remove your CLIÉ handheld while you use OpenMG Jukebox software.
Chapter 1
If you manage your audio files with OpenMG Jukebox software
Recording audio CDs onto the hard disk
1
Double-click the OpenMG Jukebox icon on the Windows
desktop, or click Start, point to Programs, OpenMG
Jukebox, and then click OpenMG Jukebox.
OpenMG Jukebox starts.
2
Insert the CD you want to record into the CD-ROM drive
of your computer.
The CD window and the tracks of the audio CD appear. If the CD
window is not displayed automatically, click the CD tab to display
the CD window.
CD tab
(Rec to
Jukebox) button
Bit Rate drop-down list
(Rec Stop)
button
Note
When recording from an audio CD in your CD-ROM drive for the first
time, the CD Drive Optimization dialog box appears when you insert the
audio CD, in order to verify that the CD-ROM drive can perform the
recording properly. Click Start to verify your CD-ROM drive.
Continued on next page
19
Playing audio files (Audio Player)
Songs recorded from audio CDs can be registered on the hard disk to
Playlists and managed with OpenMG Jukebox.
Importing audio files into your computer
3
Select the recording bit rate.
From the drop-down list, select the bit rate for recording.
If you accidentally clear the
(check mark) of a song you want to
record, click the song number again.
4
Confirm that a
(check mark) appears by the songs
you want to record.
To clear the songs you do not want to record, click the song
numbers (track numbers). The
(check mark) disappears.
5
Click
(Rec to Jukebox).
Recording starts.
The Playlist window is displayed, and the selected songs are
registered as a Playlist.
To stop recording
Click
(Rec Stop).
The recording is stopped. To resume recording, click
(Rec to
Jukebox) again.
When resumed, the recording starts from the beginning of the song
that was previously stopped.
To create a new Playlist
Click Create a New Playlist and type the name of the Playlist you want
to create.
To add songs to an existing Playlist
1
2
3
4
20
Click the CD tab, and select the songs in the CD window.
Click
(Rec to Jukebox).
The Select Playlist dialog box appears.
Click Add to Playlist and select the Playlist from the dropdown list.
Click Start Rec.
About Bit Rates
What is an Electronic Music Distribution (EMD) service?
EMD stands for Electronic Music Distribution, which is a generic name
for services that distribute digital audio content via the Internet or
other kinds of networks.
To use an EMD service supporting OpenMG
You must be able to access the Internet from your computer. Sign up
with an Internet service provider, properly configure your computer,
and configure the settings of your Web browser before using this
service. After the connection to the Internet is set up, view the
OpenMG Home Page (http://www.openmg.com/) using the
“Internet” screen of OpenMG Jukebox or another Web browser. You
can access Web sites of EMD services linked from the OpenMG Home
Page.
21
Playing audio files (Audio Player)
Importing songs via EMD
Chapter 1
In OpenMG Jukebox, the bit rate for recording an audio CD can be chosen from
among 132 kbps/105 kbps/66 kbps. The sound quality and available recording
time after the conversion will be different depending on the selected bit rate. A
Higher value makes the sound quality better, but the size of the recorded data file
will be bigger thus shortening the total Check-Out time available on your CLIÉ
handheld.
Likewise, a lower value means lower sound quality, but lengthens the total
Check-Out time available on your CLIÉ handheld.
When you use an optional 128 MB MG Memory Stick media, you can record for
approximately the following length of time:
• When you record at 132 kbps: approx. 120 min.
• When you record at 105 kbps: approx. 160 min.
• When you record at 66 kbps: approx. 240 min.
Importing audio files into your computer
To use an EMD service
1
Click the Internet tab to display the Internet window.
An introduction to the OpenMG Home Page appears on the
window.
[Internet] tab
2
Click the button or logo on the window.
The connection to the Internet starts and the OpenMG Home Page
appears.
The OpenMG Home Page provides a guide to EMD service Web
sites that support OpenMG and information on how to use EMD
services.
Refer to this OpenMG Home Page for more information about
importing audio files using EMD services.
To download audio files from EMD service Web sites
1
Display the Web page of an EMD service on the Internet
window.
2
Click an audio file for downloading (e.g., MP3 files or
WMA files compatible with WMT).
Downloading starts automatically.
If you click an audio file that requires purchasing, the default Web
browser starts up to display the online transaction page. After the
process is completed, the audio file is allowed to be imported into
OpenMG Jukebox.
22
Import downloaded audio files to OpenMG Jukebox.
If audio files are imported automatically, they are registered as
playlists, determined by the EMD service.
If they are not imported automatically, select the audio files you
want in the Import window and then import to OpenMG Jukebox
(see “Importing MP3, WAV and WMT format audio files” below).
Hint
• You can also import audio files from software such as Liquid Player into
OpenMG Jukebox. Refer to the OpenMG Home Page
(http://www.openmg.com/) for details.
• Some Internet settings (e.g., proxy server, etc.) are related to the settings of
Internet Explorer. If your computer is set to be used within a firewall, etc.,
confirm the settings of Internet Explorer before the connection.
Note
When specifying the location to be used to store songs, do not choose a folder on
removable media, such as a CD-R, CD-RW, MO, ZIP, etc. Choose a folder on the
hard disk of your computer.
Importing MP3, WAV and WMT format audio files
The following audio files can be imported to OpenMG Jukebox and
converted to the ATRAC3 format.
• MP3 files: 16 bit MP3 files, monaural/stereo, 32 kHz/44.1 kHz/48
kHz.
• WAV files: linear PCM WAV files, 16 bits, monaural/stereo, 32
kHz/44.1 kHz/48 kHz.
• WMT (Windows Media Technologies) compliant audio files
downloaded via EMD: 16 bit WMT files, monaural/stereo, 44.1
kHz. Depending on the copyright protection, some WMT compliant
audio files may not be available for importing.
Continued on next page
23
Playing audio files (Audio Player)
Note
Audio files cannot be imported automatically by clicking if you use a Web
browser (e.g., Internet Explorer, Netscape, etc.) other than the Internet window of
OpenMG Jukebox. In this case, after downloading, specify the audio files in the
Import window to import them.
Chapter 1
3
Importing audio files into your computer
Notes on importing MP3 files
To import MP3 files to the supplied OpenMG Jukebox software using the
Windows® 98 operating system, Microsoft® Windows Media™ Player Version 6.4
or later is necessary. If Windows Media™ Player is not installed on your
computer, it can be downloaded from the OpenMG Web site
(http://www.openmg.com/us/).
If your operating system is Windows® 98 Second Edition, Windows® Millennium
Edition, or Windows® 2000 Professional, Windows Media™ Player Version 6.4 or
later is already installed.
To transfer (Check-Out) songs to your CLIÉ handheld, it is necessary
to convert the audio files to be Checked-Out into ATRAC3 format.
Audio files converted into ATRAC3 format can be imported to
OpenMG Jukebox by using the Import feature. (It is also possible to
import files in their original format and then convert them into
ATRAC3 format when they are Checked-Out.)
1
Select Options from the Tool menu, and then click the
Import tab.
2
From “Store the converted files here,” click “Set location
to save the converted EMD file.”
The Location to save the file dialog box appears.
24
3
4
Click OK.
5
6
Click MagicGate Memory Stick Device.
From”File format after import,” select “The setting
changes the file format to the best appropriate one for
your External Device/Media.”
Click OK.
Click the Import tab to display the Import window.
Import tab
Chapter 1
7
Bit Rate drop-down list
Playing audio files (Audio Player)
Format
drop-down
list
File Tree
view
File List view
8
Select the audio format you want to import from the
Format drop-down list.
9
To import data while converting it into the ATRAC3
format, select the recording bit rate (see page 21) from
the Bit Rate drop-down list.
Note
When you select “Convert all to ATRAC 3” from “File format after import”
and select the recording bit rate in step 4, you cannot change the recording
bit rate.
10In the File Tree view, click the folder containing the
audio file you want to import.
The audio files in the selected folder are listed in the File List view.
11Click to select an audio file you want to import from the
File List view.
Continued on next page
25
Importing audio files into your computer
12 Click to select the desired Playlist on the right side of the
window, and then click
(Import).
The audio file you selected in step 11 can be imported into the
Playlist. Based on the setting made in step 4, the file is imported in
its original format or converted into the ATRAC3 format.
Notes
• The original MP3/WAV files imported are referenced to by the OpenMG
Jukebox when playing back or Checking-Out the data. Therefore, to prevent
moving or deleting the files, copy them to a specific folder on the hard disk
before importing them to OpenMG Jukebox.
If the original file is stored on removable media and the source media is
removed, the following messages are displayed when you try to playback or
Check-Out the data.
– For playback: “Cannot play selected song. The song file not found.”
– For Check-Out: “Detected song(s) which cannot be checked-out.”
• When the original file is on a network, the same messages are displayed when
your computer is not connected to the network.
• When you delete an audio file, note that the original MP3/WAV is also
deleted when you select “Delete the song file from the computer.”
Hint
• You can import all of the audio files on the drive dedicated on your computer
to OpenMG Jukebox at one time. For details, refer to “Importing audio files
from your computer” - “Importing songs” in the OpenMG Jukebox Help.
• If the music title is included in the data, as it is in the ID3 data of MP3 format
files, the title is displayed in the Title column of the Playlist view of OpenMG
Jukebox. If the title data is not included, the file name is displayed in the Title
column.
26
Transferring audio files from your
computer to your CLIÉ handheld
1
Memory Stick indicator
The Memory Stick indicator
lights in orange while
accessing a Memory Stick
media
Note
If you want to transfer and play ATRAC 3 format audio files that are
recorded by OpenMG Jukebox, use MG Memory Stick media.
2
On the home screen, rotate the Jog Dial navigator to
select AudioPlayer and then press the Jog Dial navigator.
Or, tap the AudioPlayer icon on the home screen.
Continued on next page
27
Playing audio files (Audio Player)
After making sure that the write protect tab is not set to
LOCK, insert the Memory Stick media into the Memory
Stick slot.
Chapter 1
Preparing your CLIÉ handheld, and placing it on the
cradle
Transferring audio files from your computer to your CLIÉ
handheld
Audio Player starts.
3
4
Place your CLIÉ handheld on the cradle.
Tap Menu
, Options, and then Transfer.
The CLIÉ handheld enters the file transfer mode.
Proceed to transferring audio files (page 29).
When you use Audio Player
• Once transferring has started, do not do any of the following until
transferring is complete.
– Disconnect the USB cable.
– Remove the MG Memory Stick.
– Remove your CLIÉ handheld from the cradle.
– Tap Exit on the Audio Player application.
– Press any application buttons on your CLIÉ handheld or the HotSync
button on the cradle.
– Tap Home
.
• If the Start-Up function of OpenMG Jukebox is set to ON, the OpenMG
Jukebox software automatically starts when your CLIÉ handheld is in the
transfer mode when you place it on the cradle. (Refer to the online Help for
more information.)
28
Chapter 1
Transferring MP3 format audio files to your CLIÉ handheld
After preparing your CLIÉ handheld as described on page 27-28, you
can copy MP3 format audio files to your CLIÉ handheld using the
Windows Explorer.
Double-click the My Computer icon on your Windows
desktop.
2
3
Double-click the Removable Drive icon.
Double-click the Palm, Programs, and then MSAudio
folder.
If these folders do not exist, create them manually in the Memory
Stick media using Windows Explorer.
4
Drag and drop MP3 format audio files to which you
want to transfer to the MSAudio folder.
Note
If you want to transfer ATRAC 3 audio files to your CLIÉ handheld, you have to
use OpenMG Jukebox software to transfer them (Check-Out). See “Transferring
audio files managed with OpenMG Jukebox” on page 30.
If your computer has a Memory Stick slot
You can copy the MP3 format audio file to a Memory Stick media
inserted in the computer’s Memory Stick slot.
In the Memory Stick media’s PALM folder, first make the PROGRAMS
folder, and then the MSAUDIO folder. Then follow the steps above.
When you insert the Memory Stick media into your CLIÉ handheld,
you can play the audio files with the Audio Player.
29
Playing audio files (Audio Player)
1
Transferring audio files from your computer to your CLIÉ
handheld
Transferring audio files managed with OpenMG Jukebox
Make sure to finish preparing your CLIÉ handheld as described on
pages 27-28. You can only use a MG Memory Stick media (color:
white) to transfer audio files.
1
2
Start OpenMG Jukebox.
Click the Check-In/Out tab to display the Check-In/CheckOut window.
Your computer recognizes the CLIÉ handheld and a list of audio
files appears on the right side of the window.
Check-In/Out tab
(Out) button
Playlist view
3
In the File Tree view on the left side of the window,
select the Playlist containing the songs you want to
Check-Out.
The songs in the Playlist are listed in the Playlist view in the center
of the window.
4
In the Playlist view, select the song(s) to be Checked-Out.
To Check-Out multiple songs at the same time, hold down the Ctrl
key and click the songs to be selected.
30
Click
(Out).
Check-Out starts and the song(s) is added to the end of the song list
in your CLIÉ handheld.
Note
To stop Check-Out
Click
(Stop).
Note
Once Check-In has started, do not do any of the following until the Check-In/Out
is complete.
• Disconnect the USB cable.
• Remove the MG Memory Stick media.
• Remove your CLIÉ handheld from the cradle.
• Tap Exit on the Audio Player.
• Press any application buttons on your CLIÉ handheld or the HotSync button
on the cradle.
• Tap Home
.
When Check-Out is complete
Tap OK in the Audio Player’s confirmation dialog box.
The transfer mode is canceled and the previous screen appears.
If you use a Windows 2000 Professional/Windows Me model
computer, a warning message appears when you tap Exit. In this case,
click OK.
31
Playing audio files (Audio Player)
You can select “1 step mode” or “2 step mode” for Checking-Out audio files.
In “2 step mode,” you must click the
(Start) button after selecting the songs.
Refer to the online Help for details.
Chapter 1
5
Playing audio files on your CLIÉ handheld
Connecting/attaching the supplied headphones
The headphones supplied with your CLIÉ handheld include a turning
mechanism for easy wearing.
Connecting the headphones to your CLIÉ handheld
1
Connect the headphones to the mini-plug of the
supplied remote controller.
2
Connect the connecting cord of the remote controller to
the headphones jack of your CLIÉ handheld.
Notes
• Do not connect equipment that is connected to other equipment such as an
amplifier, to the headphones jack of your CLIÉ handheld. It may damage
your CLIÉ handheld.
• If you connect the headphones to your CLIÉ handheld, you will hear the
tapping sounds or the beep of the CLIÉ handheld through them as well. The
tapping sounds will be silenced altogether during audio playback or playback
stand-by.
32
1
Holding the cap (housing) with your thumb and index
finger, rotate the hanger with your middle finger until it
fully opens.
Chapter 1
Putting on the headphones
Hanger
Playing audio files (Audio Player)
Cap
(housing)
2
Put the hanger on your ear, keeping it open.
3
Pivot the cap (housing) to best fit your ear.
Note
Put the hanger with the “R” mark on your right ear, and the hanger with the “L”
mark on your left ear.
33
Playing audio files on your CLIÉ handheld
Playing audio files
You can play audio files using the Audio Player. You can also use
other applications during playback.
Charge the battery before starting playback.
Notes
• The automatic shut-off does not function during playback.
• If the battery power level runs low, playback stops automatically. In this
case, however, you can still use other applications such as Memo Pad or
Address Book. Charge the battery before it becomes completely empty.
1
After making sure that the write protect tab is not set to
LOCK, insert the Memory Stick media into the Memory
Stick slot.
Note
If you want to transfer and play ATRAC 3 format audio files that are
recorded by OpenMG Jukebox, use MG Memory Stick media.
2
3
Connect the headphones.
On the home screen, rotate the Jog Dial navigator to
select Audio Player and then press the Jog Dial
navigator.
Or, tap the Audio Player icon on the home screen.
Audio Player starts and then reads the TOC information including
the song name, artist name, etc., of the Memory Stick media.
Do not remove the Memory Stick media at this time. If you do so,
the audio data may be damaged and a malfunction may occur.
Notes
• Depending on the number of songs stored in the Memory Stick media, it
may take several seconds to read the TOC data. You cannot operate
Audio Player while it is reading the TOC information including the song
name, artist name, etc.; this is not a malfunction.
• If the write protect tab of the Memory Stick media is set to LOCK, Audio
Player cannot play some songs.
34
Tap
.
Chapter 1
4
Playback starts from the first song.
The track information appears during playback.
If you cannot start playback
Make sure that the HOLD switch on your CLIÉ handheld is not set
to HOLD.
To stop playback
Tap
.
On other operations
Pause
Go to the beginning of the current track
Go to previous tracks
Go to the beginning of the next track
Go to the beginning of succeeding tracks
Go backward
Go forward
Tap
Tap
Tap
Tap
Tap
Tap
Tap
.
.
repeatedly.
.
repeatedly.
continuously.
continuously.
35
Playing audio files (Audio Player)
Playback stops automatically when the song reaches the end.
Playing audio files on your CLIÉ handheld
Adjusting the volume
You can adjust the volume in the following ways:
• Tap
or
.
• Rotate the Jog Dial navigator.*
• Press the scroll buttons of the CLIÉ handheld.
* Only if you select 1 (Volume Control) in the Jog function select
screen (page 40).
Protecting your hearing (AVLS)
The AVLS (Automatic Volume Limiter System) function keeps down
the maximum volume to protect your ears.
To use AVLS, tap
to change it to
.
Notes on battery life during audio playback
With a fully-charged battery, your CLIÉ handheld can play music for
approximately the following length of time. The battery life varies
depending on the conditions and environment where you use your
handheld.
• If you do not set the HOLD switch to HOLD and turn on the
frontlight to the maximum level, your CLIÉ handheld can playback
audio continuously for about 3 hours.
• If you set the HOLD switch to HOLD, your CLIÉ handheld can
playback audio continuously for about 11 hours.
Since the battery power level falls rapidly during audio playback, the
Battery Low warning appears earlier than with normal use. In this
case, if you stop audio playback immediately, you may still be able
to use other applications.
36
Chapter 1
Playing in various modes
Playing tracks repeatedly
Tap the repeat button to select the desired repeat playback item.
• REP OFF: normal playback
• REP 1: repeats current playback track
You can use repeat playback during shuffle or reverse playback
For example, when you set shuffle playback to On during repeat playback, Audio
Player plays all tracks repeatedly in random order.
Repeating a specific part of a song (A-B repeat function)
You can choose to play a specific part of a song repeatedly.
1
2
During playback, tap
at the repeat starting point.
The
. Playback starts from the first song.
Tap
icon changes to
at the repeat end point.
The
icon changes to
the specified points.
, and repeat playback starts between
To cancel the A-B repeat function
Tap
to change the icon to
.
Playing tracks in random order/reverse order
Tap the repeat button to select the desired playback item.
Each time you tap the playback mode icon, the playback mode
changes.
• CONTINUE: normal playback
• SHUFFLE: plays tracks in random order
• REVERSE: plays backward from the last tracks played
Note
When you tap REVERSE or SHUFFLE, the playback sound is interrupted for a
moment. This is not a malfunction.
37
Playing audio files (Audio Player)
• REP ALL: repeats all tracks
Playing audio files on your CLIÉ handheld
Selecting playback audio files (Pick up)
You can choose to only play the audio files that you select.
1
Tap Menu
, Tools, and then PickUp.
The PickUp screen appears.
2
Tap to select the check boxes of the audio files that you
want to play.
3
4
After selecting, tap OK.
Start playback.
Audio Player plays only the selected audio files.
To play all audio files
Tap Select All in the Pick up screen.
38
You can switch the display. Choose from the following three.
• Normal view: Displays the title and artist name of the currently
playing audio file, the number of audio files, and playback controls.
In Visual Effect view, you can change the effect by tapping
Playing audio files (Audio Player)
• Visual Effect view: Displays the visual effect or spectrum analyzer
with playback progress. Playback controls are also displayed.
.
• List view: Displays a title and an artist name of audio files that are
stored in the (MG) Memory Stick media. Playback controls are also
displayed.
In List view, you can play the desired audio file by tapping the file
directly. You can also change displayed items by tapping
.
List view
Visual Effect view
To change the view, tap the icon on the Audio Player.
• To change to the normal view, tap
(normal).
• To change to the visual effect view, tap
• To change to the list view, tap
Chapter 1
Switching the display
(VE).
(list).
39
Playing audio files on your CLIÉ handheld
Switching the Jog Dial navigator function for Audio Player
You can select the Jog Dial navigator function for when you use the
Audio Player. You can select to either adjust the volume, go to specific
tracks, fast-forward or fast-rewind with the Jog Dial navigator.
1
Tap the JogDial icon at the top left of the screen, or hold
the Jog Dial navigator down for a few seconds.
The Jog function select screen appears.
2
Tap the desired setup, or rotate the Jog Dial navigator
to select the desired setup.
• 1 (Volume control): You can adjust the volume by rotating the
Jog Dial navigator. When you press the Jog Dial navigator, the
playback starts/stops.
• 2 (AMS) : You can go to the beginning of the previous/
succeeding tracks by rotating the Jog Dial navigator. When you
press the Jog Dial navigator, the playback starts/stops.
• 3 (Speed): You can go backward/forward by rotating the Jog Dial
navigator. When you press the Jog Dial navigator, the playback
starts/stops.
• 4 (Position): You can control the playback point manually by
rotating the Jog Dial navigator. When you press the Jog Dial
navigator, the playback starts/stops.
• 5 (Select track): When you use Audio Player in List view, you
can select the playback audio file by rotating the Jog Dial
navigator. When you press the Jog Dial navigator (in List view),
playback starts from the selected file.
40
Tap OK.
The Jog Dial navigator icon at the top left of the screen changes to
the icon you selected, and the Jog Dial navigator function for the
Audio Player is switched to the one of your choice.
Chapter 1
3
Playing audio files (Audio Player)
41
Playing audio files on your CLIÉ handheld
Playing audio files with the supplied remote controller
You can start playback even when your CLIÉ handheld is turned off
by using the supplied remote controller.
Volume adjustment button
./> button
N/x button
1
After making sure that the write protect tab is not set to
LOCK, insert the Memory Stick media into the Memory
Stick slot.
2
3
Connect the headphones.
Press N on the remote controller.
Playback starts from the first song.
Playback stops automatically when the last song reaches the end.
To stop playback
Press x on the remote controller.
Notes
• If playback does not start even when you press N on the remote controller,
hold N down again for a few seconds.
• If the remote controller does not work, check and make sure that the check box
for Enable background play is selected (
) in the Audio Player’s Preferences
screen (page 62).
42
Press x.
Press ..
Press . repeatedly.
Press >.
Press > repeatedly.
Press . and hold.
Press > and hold.
Press + or –.
Locking the controls (Hold)
To prevent the controls from being accidentally operated when you
carry the player, use the HOLD function.
Slide the HOLD switch of the remote controller to HOLD.
None of the controls on the remote controller will operate.
HOLD switch
43
Playing audio files (Audio Player)
Pause
Go to the beginning of the current track
Go to previous tracks
Go to the beginning of the next track
Go to the beginning of succeeding tracks
Go backward
Go forward
Adjust the volume
Chapter 1
On other operations
Playing audio files on your CLIÉ handheld
Protecting your CLIÉ handheld from accidental
pressure on its controls
Slide the HOLD switch of your CLIÉ handheld to HOLD.
HOLD switch
The screen display turns off even during an operation, and none of
the controls on your CLIÉ handheld will operate.
Note
While the HOLD switch of your CLIÉ handheld is set to HOLD, you can only
operate the controls of the remote controller.
To check whether your CLIÉ handheld is playing audio files while the HOLD
switch of your CLIÉ handheld is set to HOLD
Check the Memory Stick indicator of your CLIÉ handheld. If the indicator is
flashing, your CLIÉ handheld is in the playback mode.
44
To switch the album, do as follows.
1
Tap Menu
, Tools, and then About Memory Stick.
The album information of the ATRAC3 audio files appears.
2
Tap MP3.
The playback album is switched to the MP3 custom album.
The next time you start playback, MP3 format audio files stored in
the MG Memory Stick media are played.
3
Tap OK.
To return to the ATRAC3 custom album
Tap ATRAC3 in step 2.
45
Playing audio files (Audio Player)
MP3 audio files and ATRAC3 audio files in the MG Memory Stick
media are separately managed as the custom album with Audio Player
Ver.2.1. If you insert the MG Memory Stick media that stores both MP3
and ATRAC3 format audio files and start Audio Player Ver.2.1, only
the ATRAC3 format audio files are displayed and played with the
factory setup setting.
Chapter 1
Switching the album (Custom album)
Changing the background design
You can change your Audio Player’s background design by installing
add-on sample files (Skin files).
Installing skin files to your CLIÉ handheld
You can install the skin files via your computer’s hard disk.
Place your CLIÉ handheld on the cradle, and then install the Palm
Desktop for CLIÉ software on your computer from the supplied CDROM.
1
Double-click the Palm Desktop for CLIÉ icon on the
Windows desktop.
The Palm Desktop for CLIÉ software starts.
2
Click Install.
The Install Tool dialog box appears.
3
4
Select a user name from the user list.
Click Add.
Make sure that the Add-on folder is selected.
If the Add-on folder is not selected, select it manually.
At the default setup, the Add-on folder is stored in the Sony
Handheld folder of the Program Files folder.
5
6
Double-click the AudioPlayerSkin Samples folder.
Double-click to select the skin file of your choice.
The selected file is added to the File Name list.
7
8
Click Done.
Press the HotSync button on the cradle.
The file specified in step 6 installed on your CLIÉ handheld during
the HotSync operation.
46
You can uninstall the add-on skin files from your CLIÉ handheld using
MS Gate. For details on MS Gate, see “Exchanging data via Memory
Stick media” in the Operating Instructions manual.
1
MS Gate starts. The data in your CLIÉ handheld is listed.
2
Press the Jog Dial navigator to select Internal.
You can also tap the arrow V in the upper right corner to select
Internal from the drop-down list.
3
4
Tap to select the AudioPlayerSkin file.
Tap DELETE.
The delete File dialog box is displayed.
5
Tap OK.
The skin file selected in step 3 is deleted from the CLIÉ handheld.
6
Tap the Home
icon to return to the home screen.
47
Playing audio files (Audio Player)
Rotate the Jog Dial navigator to select MS Gate and then
press the Jog Dial navigator. Or tap the MS Gate
icon on the home screen.
Chapter 1
Uninstalling skin files from your CLIÉ handheld
Notes on Memory Stick media
What is Memory Stick media?
Memory Stick media is a new compact, portable and versatile
Integrated Circuit recording medium with a data capacity that exceeds
that of a floppy disk. The Memory Stick media is specially designed for
exchanging and sharing digital data among Memory Stick media
compatible products. Because it is removable, a Memory Stick media
can also be used for external data storage.
Types of Memory Stick media
There are two types of Memory Stick media:
– MagicGate Memory Stick media (hereinafter referred to as MG
Memory Stick) (color: white) that is equipped with “MagicGate”
copyright protection technology.
– Memory Stick media (color: purple) that is not equipped with
“MagicGate” copyright protection technology.
To play ATRAC 3 format audio files that are recorded or converted by
OpenMG Jukebox software on your CLIÉ handheld, you have to use a
MagicGate Memory Stick media. Be sure to use MG Memory Stick
media with the
logo.
When you play MP3 format audio files, you can use the standard
Memory Stick media.
For playback of ATRAC 3 and/
or MP3 format audio files
For playback of MP3
format audio files
Note
Your CLIÉ handheld supports Memory Stick media with a capacity of up to
128 MB.
48
What is “MagicGate”?
To avoid damaging data, do not:
• remove the Memory Stick media or unplug the AC power adaptor
during reading or writing of data.
• use the Memory Stick media in a location subject to static electricity
or electric noise.
TOC reading time depends on the number of songs
When you start Audio Player, the application starts reading the TOC
information including the song name, artist name, etc., of the Memory
Stick media.
Depending on the number of songs stored in the Memory Stick media,
this may take a few seconds. You cannot operate Audio Player while it
is reading the TOC information; this is not malfunction.
On formatting the Memory Stick media
The Memory Stick media is shipped with a FAT format as the standard
format.
To format the Memory Stick media, please use devices compatible with
the Memory Stick media. For details, refer to the Operating
Instructions manual.
Note
If you format your Memory Stick media using your computer, further operation
with your CLIÉ handheld is not guaranteed. Format the Memory Stick using the
CLIÉ handheld according to the procedures in the Operating Instructions
manual.
49
Playing audio files (Audio Player)
Notes on use
Chapter 1
“MagicGate” is a copyright protection technology for the MG Memory Stick
media and compliant products, such as your CLIÉ handheld. Authentication
ensures that protected content is transferred only between compliant devices and
an MG Memory Stick media, and that protected content is recorded and
transferred in an encrypted format to prevent unauthorized copying or playback.
Notes on using RealJukebox for Sony
Caution
When you use an external CD-ROM drive (including
docking-stations)
While using RealJukebox for Sony software, do not connect/
remove the external CD-ROM drive. If you do, serious
malfunction may occur. If you want to connect/remove the CDROM drive, turn off your computer, then connect/remove the
drive.
• Do not start both OpenMG Jukebox and RealJukebox for Sony
concurrently. If you start both software, audio files on your
computer or Memory Stick media may be damaged and cannot be
played.
• With the RealJukebox for Sony software, you cannot move audio
files that are compatible with the “Move Music” feature from
Memory Stick media. Note that if you delete audio files that are
compatible with the “Move Music” feature using RealJukebox for
Sony software, these files are completely erased.
When you want to use “Move Music” feature, use OpenMG
Jukebox software. For more information of moving audio files, see
“Moving music from a MagicGate Memory Stick to your computer”
of “Using music files in an external device or media” in the online
Help of OpenMG Jukebox.
• With RealJukebox for Sony software, you can play audio files
downloaded from the Electronic Music Distribution (EMD) service
that support OpenMG but cannot transfer them to your CLIÉ
handheld.
If you want to transfer these files, use OpenMG Jukebox software.
50
Chapter 1
Playing audio files (Audio Player)
51
Notes on using OpenMG Jukebox
52
Chapter 1
Differences between the HotSync operation and the
Check-In/Out procedure
Playing audio files (Audio Player)
The Check-In (transferring digital audio files to your computer)/Out
(transferring digital audio files to your CLIÉ handheld) procedure
differs from the HotSync operation in several ways.
When you perform the HotSync operation
• Since the HotSync Manager of the Palm Desktop for CLIÉ software
manages the operation, the computer recognizes your CLIÉ
handheld as a Palm OS compatible handheld.
• You can perform the HotSync operation even when your CLIÉ
handheld is turned off.
• The data transfer starts when you press the HotSync button on the
cradle.
When you perform the Check-In/Out procedure
• Since the OpenMG Jukebox software manages the operation, the
computer recognizes your CLIÉ handheld as a USB Mass storage
device.
• You cannot perform the Check-In/Out procedure if your CLIÉ
handheld is turned off.
• Pressing the HotSync button will stop the data transfer.
53
Notes on using OpenMG Jukebox
Transferring songs from your CLIÉ handheld to your
computer (Check-In)
You can return audio files recorded on your CLIÉ handheld to your
computer’s hard drive (Check-In). You can return them only to the
same computer from which the tracks were Checked-Out.
1
Start OpenMG Jukebox and place your CLIÉ handheld on
the cradle.
2
On the home screen, rotate the JogDial navigator to
select AudioPlayer and then press the JogDial navigator.
Or, tap the AudioPlayer icon on the home screen.
Audio Player starts.
3
Tap Menu
, Options, and then Transfer.
Your CLIÉ handheld enters the transfer mode and your computer
recognizes the CLIÉ handheld.
4
Select the song to be Checked-In from the song list of
the MG Memory Stick in your CLIÉ handheld.
To Check-In mutiple songs at the same time, hold down the Ctrl key
and click the songs to be selected.
5
Click
(In).
Check-In starts.
Note
You can select to “1 step mode” or “2 step mode” for Checking-In audio files.
In “2 step mode,” you must click
(Start) after selecting the songs. Refer to the
online Help for details.
54
Click
(Stop).
Note
Once the Check-In has started, do not disconnect the USB cable or Memory Stick
until the Check-In is complete. Doing so may damage the data or cause a
malfunction.
If you want to Check-In all the audio files on your CLIÉ handheld, click
(In
All). All the songs in the MG Memory Stick in your CLIÉ handheld are CheckedIn.
55
Playing audio files (Audio Player)
Hint
Chapter 1
To stop Check-In
Notes on using OpenMG Jukebox
Notes on playing audio files
For the latest information on these applications, see the Website of the
portable audio customer support.
(http://www.openmg.com)
Installing OpenMG Jukebox software from the supplied CDROM
Be sure to install the OpenMG Jukebox software before connecting the
unit to your computer.
If you place your CLIÉ handheld on the cradle and the CLIÉ handheld
enters the transfer mode before the software is properly installed, your
computer selects an inappropriate driver and the unit may not work
correctly.
Taking backups of songs
When operations that modify the operating system (e.g., system
recovery or system restoration, etc.) are performed, be sure to use the
OpenMG Jukebox Backup Tool beforehand to take a backup, and then
run the operation. For details, see the online Help.
56
• Do not change to system suspend/system hibernation mode during
the following modes:
– recording songs from an audio CD
– playing songs using OpenMG Jukebox
– placing your CLIÉ handheld in the transfer mode on the cradle
• If you replace the MG Memory Stick during system suspend/system
hibernation mode, songs may be lost after the system resumes.
• If you are using Windows® 2000 Professional:
When you put the computer in suspend/system hibernation mode
while you place your CLIÉ handheld in the transfer mode on the
cradle, and OpenMG Jukebox is started immediately upon system
resume, the message “Cannot initialize OpenMG PD Manager” may
appear.
In this case, click OK and then disconnect and reconnect your CLIÉ
handheld and restart OpenMG Jukebox.
On the write protect tab of the MG Memory Stick media
When using OpenMG Jukebox, the contents of a MagicGate Memory
Stick media may not be displayed if you insert it with the write protect
tab set to LOCK, even if you re-insert it after unlocking it. In this case,
disconnect and reconnect your CLIÉ handheld and restart OpenMG
Jukebox.
57
Playing audio files (Audio Player)
• If you put your computer in system suspend/system hibernation
mode during CD recording, file import, Check-In, or Check-Out
songs may be lost and the system may not be recovered normally.
Chapter 1
On system suspend/system hibernation mode
Notes on using OpenMG Jukebox
Restrictions on copyright protection by OpenMG
OpenMG Jukebox features OpenMG, a copyright protection
technology developed by Sony to protect music copyrights.
OpenMG uses a high-level cryptographic technology to protect music
contents with computers.
Users should be notified of the restrictions mentioned below.
1.This product can only be used with a computer on which the
supplied OpenMG Jukebox software has been installed.
2.Music recorded on the hard disk using the OpenMG Jukebox
software cannot be played if copied onto other computers.
3.Music contents Checked-Out from a computer cannot be played if
copied onto other computers.
4.Music contents checked-out from a computer must be Checked-In to
the same computer. You cannot Check-In to other computers.
5.Installation of the same OpenMG Jukebox software onto other
computers is not permitted.
6.Usage Rules for using music:
If a Usage Rule is included in the music by way of the copyright
holder or the distributor, operation will be restricted to use
permitted by the Usage Rule. For music (such as compact discs) that
do not contain a Usage Rule, the Default Usage Rule of SDMI will be
followed. This Default Usage Rule states that one file can be
Checked-Out up to three times only.
7.On music contents that are not compatible with the OpenMG
Jukebox software:
Under the supervision of SDMI, this software prohibits recording of
music with a copy prohibition signal.
8.Upgrading the supplied OpenMG Jukebox software:
This software was developed in accordance with the current
arrangement between Sony and SDMI. If this arrangement is
modified in the future, some of the software functions may become
unavailable. Sony may offer an upgrade kit in this case at additional
user expense.
58
Using Help files
Chapter 1
The supplied software includes three types of Help files:
• RealJukebox Help: Help files on how to use the RealJukebox
software.
• OpenMG Jukebox Help: Help files on how to use the OpenMG
Jukebox software.
Displaying Help files
You can display the Help files either of the following ways:
To display the RealJukebox Help
• Click Start, Programs, Real, and then RealJukebox.
• Start the RealJukebox software, and then select the Help file from the
Help menu.
To display the OpenMG Jukebox Help or CLIÉ Help
• Click Start, Programs, OpenMG Jukebox, and then OpenMG Jukebox
Help or CLIÉ Help.
• Start the OpenMG Jukebox software, and then select the desired
Help file from the Help menu.
59
Playing audio files (Audio Player)
• CLIÉ Help: Help files on how to use your CLIÉ handheld with
OpenMG Jukebox software when it’s connected to your computer.
How to read the online manual
Detailed information on the Audio Player application is provided with
the online manual in the supplied CD-ROM.
To view the online manual, the Adobe Acrobat Reader version 4.0 or
higher must be installed on your computer.
1
Insert the supplied CD-ROM into your computer’s CDROM drive.
The install screen appears automatically.
2
3
Click Manuals.
Double-click AudioPlayer2.pdf.
The online manual appears.
If the Acrobat Reader software is not installed/updated
1
Insert the supplied CD-ROM into your computer’s CDROM drive.
The install screen appears automatically.
60
2
3
Click Exit.
4
Right-click the CD-ROM drive icon, then click Open from
the shortcut menu.
5
6
7
Double-click the PC folder.
Double-click the My Computer icon on the Windows
desktop.
Double-click the Acrobat folder.
Double-click ar500enu.exe to install the Acrobat Reader
onto your computer.
Audio Player menu items
Chapter 1
The following items appear when you tap the MENU icon.
This section explains the menu commands specific to Audio Player.
For the Edit menu, see “Using the Edit menu” in the Operating
Instructions manual.
Tools menu
Shows the information for the (MG) Memory Stick media inserted into
your CLIÉ handheld and album information.
MP3 audio files and ATRAC3 audio files in the (MG) Memory Stick
media are separately managed as Album. You cannot play both format
audio files continuously.
If you want to switch the album to be played, tap the desired album.
About Album
Shows the current album information of MP3 audio files or ATRAC3
audio files.
About Track
Shows the information for the track being played or selected.
PickUp
Shows the PickUp screen to select playback audio files. For details, see
“Selecting playback audio files (Pick up)” on page 38.
Options menu
Transfer
Sets your CLIÉ handheld to the transfer mode.
The transfer mode screen appears and other controls will not operate.
Preferences
Shows the preference screen.
• Enable operation beep: If you want the beep to sound when you
use controls, tap to select the check box.
61
Playing audio files (Audio Player)
About Memory Stick
Audio Player menu items
• Enable background play: If you want to continue to play audio files
while you use other applications, tap to select the check box. If you
want to start playback from the remote controller, tap to select the
check box. Tap to unselect this check box if you want to delete Audio
Player.
• Reset PB mode by album change: If you want to reset the playback
mode to the factory preset setting when you change the album or the
Memory Stick media, tap to select the check box.
• JOG extended push: Changes the function when you push the Jog
Dial navigator for a certain length of time. Tap to select the check
box of the desired function.
– Select JOG func: Shows the jog function screen. For details, see
“Switching the Jog Dial navigator function for Audio Player” on
page 40.
– Change view: Switches the display view as follows:
Normal view c Visual Effect view c List view c Normal view c ...
For details, see “Switching the display” on page 39.
About Audio Player
Shows the version information of the Audio Player application.
62
Chapter 2
Viewing image files
(PictureGear Pocket)
Chapter 2
This chapter explains how to view image files
on your CLIÉ handheld.
What you can do with PictureGear Pocket
PictureGear Pocket is a picture album application for your CLIÉ
Handheld.
Anytime anywhere...
Using PictureGear Pocket, you can store still image files from various
sources including those taken with a digital camera or those
downloaded from the Internet to your CLIÉ handheld. You can look at
your favorite image files anytime and anywhere.
Using PictureGear Pocket as a photo stand or a clock
Using the PhotoStand function, you can display image files that are
drawn on a computer or image files taken with a digital camera.
You can also use your CLIÉ handheld to display the current time on
your CLIÉ handheld screen while using the PhotoStand function.
Beaming my image files ...
Use IR (Infrared) communication to exchange image files easily with
other CLIÉ handheld users. You cannot beam image files to other Palm
OS based devices.
Pasting a image file to an address entry
You can paste an image to an address entry.
For details, refer to the Operating Instructions manual.
64
Installing
You do not have to install PictureGear Pocket on your CLIÉ handheld,
as it is factory pre-installed. This section describes how to install the
PhotoStand application. If you install PhotoStand, you can use the
PhotoStand function (pages 78-79).
Installing the PhotoStand application to your CLIÉ
handheld
Chapter 2
You can install PhotoStand via your computer’s hard disk.
Place your CLIÉ handheld on the cradle, and then install the Palm
Desktop for CLIÉ software on your computer from the supplied CDROM.
Double-click the Palm Desktop for CLIÉ icon on the
Windows desktop.
Viewing image files (PictureGear Pocket)
1
The Palm Desktop for CLIÉ software starts.
2
Click Install.
The Install Tool dialog box appears.
3
4
Select a user name from the user list.
Click Add.
Make sure that the Add-on folder is selected.
If the Add-on folder is not selected, select it manually.
At the default setup, the Add-on folder is stored in the Sony
Handheld folder of the Program Files folder.
5
6
Double-click the PGPocket folder.
Double-click PhotoStand.prc.
PhotoStand.prc is added to the File Name list.
7
Repeat steps 4 and 5, and double-click PSLaunch.prc.
PSLaunch.prc is added to the File Name list.
8
9
Click Done.
Press the HotSync button on the cradle.
Files specified in steps 6 and 7 are installed on your CLIÉ handheld
during the HotSync operation.
65
Installing
Installing the PictureGear 4.4Lite software to your computer
You can convert the image files stored in your computer using
PictureGear 4.4Lite. To view image files or movies with your CLIÉ
handheld, use PictureGear Pocket or gMovie player.
1
Insert the Installation CD-ROM into the CD-ROM drive.
The installation launcher window appears.
2
3
4
Click Install CLIÉ Utilities.
Click Install CLIÉ Image Software.
Click Install PictureGear Lite.
The PictureGear 4.4Lite software installation starts.
Follow the onscreen instructions to finish installation.
5
Click Exit.
To start PictureGear 4.4Lite
From the Start Menu, click Programs, PictureGear 4.4Lite,
and then PictureGear 4.4Lite.
For details on how to use PictureGear 4.4Lite, see the Help files of the
PictureGear 4.4Lite software.
66
Viewing image files stored in your CLIÉ
handheld
Transferring image files to your CLIÉ handheld
1
Start PictureGear 4.4Lite.
See page 66 for details.
2
Select the image file you want to send.
You can also select multiple images by holding down the Ctrl or
Shift keys while clicking.
3
From the File menu, select Output services and then
Install the image during the next HotSync.
The User name dialog box appears.
4
Click the arrow V to the right of the text box, and then
select a user name.
If necessary, click “Still settings” and set the size and compression
for the image file you want to send in the Settings for PictureGear
dialog box.
5
Click OK.
The image file you want to send and the user name are registered in
PictureGear.
6
Place your CLIÉ handheld on the cradle, then press the
HotSync button on the cradle.
The registered image file(s) are automatically sent to your CLIÉ
handheld during the HotSync operation.
67
Viewing image files (PictureGear Pocket)
Prepare image files you want to display on your CLIÉ handheld, and
then transfer them to your CLIÉ handheld.
Chapter 2
You can transfer image files taken by a digital still camera or
downloaded from the Internet, etc. These items can be managed using
the PictureGear 4.4Lite software on your computer. You can also
optimize the photos for displaying on your CLIÉ handheld using
PictureGear 4.4Lite software before transferring them to your CLIÉ
handheld.
For details on how to save image files in the format supported by
PictureGear 4.4Lite software, refer to the instruction manual of the
devices or imaging software you are using.
Viewing image files stored in your CLIÉ handheld
To save an image file to a Memory Stick media
You can also directly transfer image files to Memory Stick media.
Select Output CLIÉ Handheld format file to Memory Stick in step 3 on
page 67.
To view image files stored in a Memory Stick media, see page 73.
68
Viewing image files with your CLIÉ handheld
1
On the home screen, rotate the Jog Dial navigator to
select PG Pocket and then press the Jog Dial navigator.
Or, tap the PG Pocket icon on the home screen.
Chapter 2
2
Tap the arrow V on the top center of the screen to select
Internal.
69
Viewing image files (PictureGear Pocket)
PictureGear Pocket starts.
Viewing image files stored in your CLIÉ handheld
3
Rotate the Jog Dial navigator to display the desired
image file, then press the Jog Dial navigator.
Or, tap the desired image.
The selected image appears.
4
When you want to hide icons displayed at the bottom of
your CLIÉ handheld screen, tap
(hide icons).
When you want to display them again, tap the screen, or press the
Jog Dial navigator or the BACK button.
5
When you want to show another image file, rotate the
Jog Dial navigator.
Another image file appears.
6
To return to the photo list screen, tap anywhere on the
screen, or press the Jog Dial navigator or the BACK
button.
To return from the detailed information screen to the image file list
screen, tap Close on the lower left of the screen or press the BACK
button.
70
Viewing detailed information for the image file
Tap
(detailed) while the image file is displayed.
Detailed information for the image file appears.
Chapter 2
1
2
Tap
while the image file is displayed.
Rotate the Jog Dial navigator to magnify the image file.
When you press the Jog Dial navigator, the image file is
automatically magnified on the screen.
If you rotate the Jog Dial navigator counter-clockwise, the image is
magnified. If you rotate the Jog Dial navigator clockwise, the image
is reduced.
3
If part of the image is outside the bounds of the screen,
you can pan by dragging on the screen with your stylus.
4
To return to the photo list screen, press the BACK
button.
71
Viewing image files (PictureGear Pocket)
Magnifying image files
Viewing image files stored in your CLIÉ handheld
Changing the image file list screen
You can change the image file list screen to display items by name and
date, or by thumbnail image.
By name and date
(List mode)
By thumbnail image
(Preview mode)
To display the image file list by name and date (List mode)
Tap
.
To display the image file list by thumbnail image (Preview
mode)
Tap
72
.
Viewing image files stored in Memory Stick
media
1
On the home screen, rotate the Jog Dial navigator to
select PG Pocket and then press the Jog Dial navigator.
Or, tap the PG Pocket icon on the home screen.
PictureGear Pocket starts.
Insert the Memory Stick media into the Memory Stick
slot.
3
Tap the arrow V on the top center of the screen to select
MS.
Continued on next page
73
Viewing image files (PictureGear Pocket)
2
Chapter 2
Image files shot by a digital still camera or digital video camera
recorder and recorded in a Memory Stick media are stored in the DCF
format. This format differs from the PGP format which is standard for
PictureGear Pocket software.
You can view both PGP format image files and DCF format image files
using PictureGear Pocket. In addition, you can convert DCF format
image files into PGP format image files, and save them to your CLIÉ
handheld or Memory Stick media.
Viewing image files stored in Memory Stick media
4
If you want to view DCF image files taken by digital still
cameras etc., tap DCF.
If you want to view image files converted by the PictureGear Pocket
or PictureGear 4.4Lite software, tap PGP.
Note
You cannot move, copy or transfer DCF format image files using the MS Gate
application. However, you can convert them into PGP format image files using
PictureGear Pocket, and save them to your CLIÉ handheld.
Notes on DCF format
• DCF (Design rule for Camera File system) is an industry standard format for
storing image files established by JEIDA (Japan Electronic Industry
Development Association).
• Using the PictureGear Pocket application, you cannot view image files shot by
a device that does not support the DCF format such as the Sony digital video
camera recorder DCR-TRV9000 or Sony digital still camera DSC-D700/D770.
• DCF format image files are stored in the DCIM directory of the Memory Stick
media.
• For best results, use PictureGear 4.4Lite on your computer to convert the
images to PGP format before storing them in a Memory Stick media.
74
Copying image files
Saving image files stored on your CLIÉ handheld to a
Memory Stick media (Export)
1
2
Display the image file that you want to save (page 69).
Tap
(Import/Export).
3
Tap OK.
To cancel the operation
Tap Cancel in step 3 above.
Saving multiple image files to a Memory Stick media at once
In the photo list screen, tap
(Import/Export).
The check boxes used for selecting the image files appear.
2
Tap the check boxes to select the image files you want
to save.
3
Tap Export.
The Import/Export dialog box appears.
4
Tap OK.
75
Viewing image files (PictureGear Pocket)
The selected image file is saved to the Memory Stick media.
If the selected file is in DCF format, it is automatically converted
into, and saved in, PGP format.
1
Chapter 2
The Import/Export dialog box appears.
• To change the category of the image files, tap the arrow V and
select the desired category.
• If you want to delete the original image file stored on your CLIÉ
handheld, tap the check box next to Remove original image.
Copying image files
Saving image files stored on a Memory Stick media to
your CLIÉ handheld (Import)
1
2
Display the image file that you want to save (page 73).
Tap
(Import/Export).
The Import/Export dialog box appears.
• When you want to save a PGP format image file
To change the category of the image files, tap the arrow V and
select the desired category.
If you want to delete the original image file stored in a Memory
Stick media, tap to select Delete the original image.
• When you want to save a DCF format image file
To change the number of colors of the image, tap to select 16-bit
or 8-bit colors.
3
Tap OK.
The selected image file is converted to the PGP format and saved to
the CLIÉ handheld. Depending on the image file, this may take a
few seconds.
To cancel the operation
Tap Cancel in step 3 above.
76
Saving multiple DCF image files to your CLIÉ handheld at
once
1
In the photo list screen, tap
(Import/Export).
The check boxes used for selecting the image files appear.
Chapter 2
Tap the check boxes to select the image files you want
to save.
3
Tap Import.
The Import/Export dialog box appears.
4
Tap OK.
The selected image files are converted to the PGP format and saved
to the CLIÉ handheld. Depending on the image file, this may take a
few seconds.
77
Viewing image files (PictureGear Pocket)
2
Displaying image files one after another
(PhotoStand)
You can display image files one after another when you place your
CLIÉ handheld on the cradle (PhotoStand function).
You can also use your CLIÉ handheld as a clock by displaying the
current time using the PhotoStand application.
Making a PhotoStand setting
1
In the photo list screen of PictureGear Pocket, tap
(PhotoStand).
The check boxes used for selecting the image files appear.
2
Tap to select the image file(s) which you want to display
with the PhotoStand function.
3
Tap PhotoStand.
The PhotoStand application starts, and the Settings screen appears.
4
Make your settings.
• Title: Enter the desired Photo Stand title.
• Sort By: Select the order in which to display the image files.
• Effect: Select the transition effect to be used between images or
the clock type.
• Display Interval: Set an interval to determine the length of time
an individual image file will be displayed.
78
• Loop: If you want to repeat image files automatically from the
start, tap to select this check box.
• Autorun: If you want to start PictureGear Pocket when you
insert the Memory Stick media into your CLIÉ handheld, tap to
select this check box. This option appears only if you select the
images stored on the Memory Stick media for the PhotoStand.
5
Tap Save.
Chapter 2
The image files that you selected in step 2 and the settings you
made in step 4 are saved with a PhotoStand title.
Starting PhotoStand
On the home screen, rotate the Jog Dial navigator to
select PhotoStand and then press the Jog Dial navigator.
Or, tap the PhotoStand icon on the home screen.
PhotoStand starts.
2
3
Tap the PhotoStand title that you want to play.
Tap Start.
Image files in the selected category appear one after another.
Exiting PhotoStand
Press the Jog Dial navigator or tap the screen.
For the PhotoStand title lists stored on the Memory Stick media
Select “VMS” in step 2.
79
Viewing image files (PictureGear Pocket)
1
Viewing sample image files
You can view sample image files installed on your computer.
Install the Palm Desktop for CLIÉ software to your hard disk using the
supplied CD-ROM and then place your CLIÉ handheld on the cradle.
1
Double-click the Palm Desktop for CLIÉ icon on the
Windows desktop.
The Palm Desktop for CLIÉ software starts.
2
Click Install.
The Install Tool dialog box appears.
3
4
Select a user name from the user list.
Click Add.
Make sure that the Add-on folder is selected.
If the Add-on folder is not selected, select the folder manually.
At the default setup, Add-on folder is stored in the Sony Handheld
folder of the Program Files folder.
5
6
7
Double-click the PGPocket folder.
Double-click the Samples folder.
Double-click the sample image file you want to view on
the screen of your CLIÉ handheld.
The selected image file name is added to the File Name list.
If you want to view other sample images, repeat this step.
8
9
Click Done.
Press the HotSync button on the cradle.
The selected sample image files will be installed on your CLIÉ
handheld.
10 Start PictureGear Pocket.
For details, see page 69.
80
How to read the online manual
Detailed information on the PictureGear Pocket application is
provided in the online manual in the supplied CD-ROM.
To view the online manual, the Adobe Acrobat Reader version 4.0 or
higher must be installed on your computer.
1
Insert the supplied CD-ROM into your computer’s CDROM drive.
The install screen appears automatically.
Chapter 2
2
3
Click Manuals.
Double-click PictureGear Pocket Manual.pdf.
The online manual appears.
If the Acrobat Reader software is not installed/updated
Insert the supplied CD-ROM into your computer’s CDROM drive.
The install screen appears automatically.
2
3
Click Exit.
4
Right-click the CD-ROM drive icon, then click Open from
the shortcut menu.
5
6
7
Double-Click the PC folder.
Double-click the My Computer icon on the Windows
desktop.
Double-click the Acrobat folder.
Double-click ar500enu.exe to install the Acrobat Reader
onto your computer.
81
Viewing image files (PictureGear Pocket)
1
PictureGear Pocket menu items
The following items appear when you tap the MENU icon.
This section explains the menu commands specific to PictureGear
Pocket.
Photo list screen
View menu
List
Changes the view of the photo list screen.
PhotoStand
Starts the Photostand application.
Image menu
Import/Export
Shows the import/export screen.
Tap the check boxes to select the image file(s) you want to import/
export. For details, see “Copying image files” on page 75.
Remove
Shows the Remove screen.
Tap to select the image file(s) you want to delete. For details, refer to
the online manual.
Categorize
Shows the Categorize screen.
Tap to select the image file(s) you want to categorize. For details, refer
to the online manual.
82
Options menu
Preference (available only when you view image files stored in
the Memory Stick media)
Shows the Preference screen.
Tap to select the default image format.
About PictureGear Pocket
Chapter 2
Shows the version information of PictureGear Pocket.
Image file screen
View menu
Viewing image files (PictureGear Pocket)
Back
Returns to the Photo list screen.
Details
Shows detailed information for the image file.
Zoom
Magnifies the image file. For details, see “Magnifying image files” on
page 71.
First Image
Shows the first image file.
Prev Image
Shows the previous image file.
Next Image
Shows the next image file.
Last Image
Shows the last image file.
Show/Hide tool bar
Shows/hides the toolbar at the bottom of the screen.
Continued on next page
83
PictureGear Pocket menu items
Image menu
Import/Export
Imports/exports the currently selected image file. For details, see
“Copying image files” on page 75.
Delete
Deletes the currently selected image file. For details, refer to the online
manual.
Beam
Beams the currently selected image file to another CLIÉ handheld.
Options menu
Preference
Shows the Preference screen.
About PictureGear Pocket
Shows the version information of PictureGear Pocket.
84
Chapter 3
Playing a movie (gMovie player)
This chapter explains how to play a movie on your CLIÉ
handheld.
Chapter 3
What you can do with the gMovie player
software
gMovie is an application which allows you to display or play back
movie file created with Windows® applications such as PictureGear
4.4Lite, on your CLIÉ handheld.
Playing movies on your CLIÉ handheld
You can play a movie that has been converted to the proper format
and then transferred from your computer, or stored in the Memory
Stick media.
You can enjoy your favorite movies anytime, anywhere.
86
Installing
You do not have to install gMovie player on your CLIÉ handheld
The gMovie player application is factory pre-installed.
Install PictureGear 4.4Lite software to your computer
Install PictureGear 4.4Lite software to your computer according to the
instructions on page 66.
Chapter 3
Playing a movie (gMovie player)
87
Playing movies with your CLIÉ handheld
You can transfer movies shot by a digital still camera or downloaded
from the Internet, etc., which are managed by the PictureGear 4.4Lite
software on your computer. You will need to optimize movies on your
CLIÉ handheld by the PictureGear 4.4Lite software before transferring.
For details of operations or how to save the movies in the format
which is supported by the PictureGear 4.4Lite, refer to the online Help
of the PictureGear 4.4Lite.
Transferring movies to your CLIÉ handheld
Prepare the items you want to display on your CLIÉ handheld, and
then transfer them to your CLIÉ handheld.
1
Start PictureGear 4.4Lite.
See page 66 for details.
2
Select the movie you want to send.
You can also select multiple movies by holding down the Ctrl or
Shift keys while clicking.
3
From the File menu, select Output services and then
Install the image during the next HotSync.
The User name dialog box appears.
4
Click the arrow V to the right of the text box, and then
select a user name.
If necessary, click Movie settings and set the size and compression
for the image you want to send in the “Settings for Movies on CLIÉ
Handheld” dialog box.
5
Click OK.
The images you want to send and the user name are registered in
PictureGear.
6
Place your CLIÉ handheld in the cradle, and then press
the HotSync button on the cradle.
The registered images are automatically sent to your CLIÉ handheld
during the HotSync operation.
88
To save a movie to the Memory Stick media
If your computer has a Memory Stick reader, you can also directly
transfer a movie to the Memory Stick media.
Select “Output CLIÉ format file to Memory Stick” in step 3 on page 88.
Chapter 3
Playing a movie (gMovie player)
89
Playing movies with your CLIÉ handheld
Playing movies
1
On the home screen, rotate the Jog Dial navigator to
select gMovie and then press the Jog Dial navigator.
Or, tap the gMovie icon on the home screen.
The gMovie player starts and the movie list screen appears.
2
Tap the movie you want to play.
Playback starts.
To stop playback
Tap
(Stop).
To resume playback, tap
(Play).
To locate the starting point of the movie
Tap
90
(Locate).
To adjust the volume
Tap each line in
(Volume) towards the right (increase) or to the left
(decrease).
To return to the movie list screen
Tap
(Return) at the upper-right corner of the screen.
To play the next movie
Tap
(Next) at the upper-right corner of the screen.
To play movies one after another (continuous playback)
Using the remote controller
Playing a movie (gMovie player)
Go to next file
Go to previous file
Play
Stop playback
Adjust the volume
Press >.
Press ..
Press B.
Press x.
Press + or –.
To delete a movie
1
Display the movie you want to delete, and then tap
Menu
.
2
3
Tap Delete.
Chapter 3
Tap and hold (Next) at the upper-right corner of the screen for a few
seconds.
The icon changes into
(Continuous) and movies stored in your CLIÉ
handheld are played one after another.
To return to the normal playback, tap and hold
(Continuous) for a
few seconds.
Tap OK.
The selected movie is deleted, and then the movie list screen
appears.
91
Playing sample movie files
You can view sample movie files installed on your computer.
Install the Palm Desktop for CLIÉ software to your hard disk using the
supplied CD-ROM and then place your CLIÉ handheld on the cradle.
1
Double-click the Palm Desktop for CLIÉ icon on the
Windows desktop.
The Palm Desktop for CLIÉ software starts.
2
Click Install.
The Install Tool dialog box appears.
3
4
Select a user name from the user list.
Click Add.
Make sure that the Add-on folder is selected.
If the Add-on folder is not selected, select the folder manually.
At the default setup, Add-on folder is stored in the Sony Handheld
folder of the Program Files folder.
5
6
Double-click the gMovie samples folder.
Double-click the sample movie file you want to play on
the screen of your CLIÉ handheld.
The selected movie file name is added to the File Name list.
If you want to view other sample movies, repeat this step.
7
8
Click Done.
Press the HotSync button on the cradle.
The selected sample movie files will be installed on your CLIÉ
handheld.
9
Start gMovie player.
For details, see page 90.
92
How to read the online manual
Detailed information on gMovie player software is provided in the
online manual on the supplied CD-ROM.
To view the online manual, the Adobe Acrobat Reader version 4.0 or
higher must be installed on your computer.
1
Insert the supplied CD-ROM into your computer’s CDROM drive.
The install screen appears automatically.
2
3
Click Manuals.
Double-click gMovie Manual.pdf.
The online manual appears.
If the Acrobat Reader software is not installed/updated
Insert the supplied CD-ROM into your computer’s CDROM drive.
Chapter 3
1
The install screen appears automatically.
Click Exit.
4
Right-click the CD-ROM drive icon, then click Open from
the shortcut menu.
5
6
7
Double-click the PC folder.
Double-click the My Computer icon on the Windows
desktop.
Double-click the Acrobat folder.
Double-click ar500enu.exe to install the Acrobat Reader
onto your computer.
93
Playing a movie (gMovie player)
2
3
gMovie software menu items
The following items appear when you tap the MENU icon on your
CLIÉ handheld screen.
This section explains the menu commands specific to gMovie player.
Media list screen
Media menu
About gMovie
Shows version information of the gMovie application.
Movie file screen
Media menu
Details
Shows detailed information of the current media.
Beam Media
Transfers the data contained in the current media to another CLIÉ
handheld via the IR port. For details about beaming, see the Operating
Instructions manual supplied with the CLIÉ handheld.
Delete
Deletes the current media. Tap OK in the Delete Media dialog box to
perform deletion. Tap Cancel to cancel deletion.
Preferences
Displays the available options for movie playback:
• Loop movie playback: If you want to play the current movie file
repeatedly, tap to select this check box.
When this check box is cleared, movies will no longer play
continuously.
• Limit maximum volume: If you want to limit the maximum volume
of the audio, tap to select this check box.
94
• Audio Channels:
Both: When you are using both the left and right headphones, select
this to enjoy both channels of the movie’s audio.
Left: When you are using just the left headphone, select this to have
just the left channel of the movie’s audio come from the left
headphone.
Right: When you are using just the right headphone, select this to
have just the right channel of the movie’s audio come from the right
headphone.
Note
You cannot have both channels of the movie’s audio come from just the left
or the right headphone.
About gMovie
Chapter 3
Shows version information of the gMovie application.
Playing a movie (gMovie player)
95
96
Chapter 4
Setting the Memory Stick automatic start
function (MS Autorun)
This chapter explains how to set the Memory Stick
automatic start function on your CLIÉ handheld.
When you want to start an application in the Memory
Stick media from the home screen, refer to the Operating
Instructions manual.
Chapter 4
What you can do with the MS Autorun
application
Memory Stick Autorun (hereinafter referred to as MS Autorun) is an
add-on application which allows your CLIÉ handheld to copy and
start a specified application automatically when Memory Stick media
is inserted into the CLIÉ handheld. Removing the Memory Stick
media automatically deletes the application copy from the memory of
the CLIÉ handheld. MS Autorun functions as a virtual memory to
effectively utilize the memory of the CLIÉ handheld.
Starting an application (.prc) on the CLIÉ handheld automatically
When you use a digital still camera that is compatible with Memory
Stick media, you can view your images by inserting the Memory Stick
media into the CLIÉ handheld. In this example, you would use the
auto-run setting to start the PictureGear Pocket application on your
CLIÉ handheld.
Starting an application (.prc) in a Memory Stick media
automatically
This setting is for automatically starting an application which does not
access any data, such as game applications, or an application which
accesses data in the CLIÉ handheld (not in the Memory Stick media).
Starting a pre-selected application (.prc) and related database
files (.pdb, .prc) in a Memory Stick media*
This setting automatically displays a specific image or file with an
application such as an image viewer or a document reader. You need
to specify an application and the related database files before using
this auto-run setting.
Starting an application (.prc) on the CLIÉ handheld automatically
with specific database files (.pdb, .prc) from a Memory Stick
media*
This setting is used when the application is located on the CLIÉ handheld
and the corresponding database files are located on a Memory Stick
media. You can also display the desired data automatically by inserting
the Memory Stick media into your CLIÉ handheld.
* If you specify PictureGear Pocket as an auto-run application, tap the arrow V
on the top center of the screen in PictureGear Pocket to select “MS.” Likewise,
if you specify gMovie player as an auto-run application, tap the movie file you
want to play.
98
Notes
You do not have to install MS Autorun on your CLIÉ
handheld
The MS Autorun application is factory pre-installed.
Setting the Memory Stick automatic start function (MS Autorun)
• It is not recommended to use MS Autorun with the Address Book, Date Book,
To Do List, Memo Pad, Calculator or Mail applications. Problems may occur if
the data of these applications do not reside on your CLIÉ handheld when you
perform a HotSync operation.
• The specified application may not start automatically depending on the
application in use when you insert the Memory Stick media into your CLIÉ
handheld. In this case, return to the home screen, and then insert the Memory
Stick media again.
Chapter 4
99
Setting Auto-run for an application
To automatically start an application stored in a Memory Stick media,
perform the following procedure. This example is for when the
PictureGear Pocket application is set to start automatically when a
Memory Stick media containing photos is inserted to the CLIÉ
handheld.
1
Install an application you want to start automatically
(PictureGear Pocket) on the CLIÉ handheld.
2
Insert the Memory Stick media for which you want to set
the autorun function to into the Memory Stick slot.
3
On the home screen, rotate the Jog Dial navigator to
select MSAutorun and then press the Jog Dial navigator.
MS Autorun starts.
Or, tap MSAutorun icon on the home screen.
4
Press the Jog Dial navigator.
The list of applications in your CLIÉ handheld appears.
5
Tap the application (PictureGear Pocket) for which you
want to set the auto-run function.
6
Tap Set.
The setting is stored in the Memory Stick media, and the
confirmation dialog box appears.
7
Tap OK.
The auto-run setting is completed.
8
9
100
Tap Home
to return to the home screen.
Remove the Memory Stick media.
When the home screen is displayed and you insert Memory Stick
media into your CLIÉ handheld, the PictureGear Pocket application
starts automatically.
In this case, if you remove the Memory Stick media, the PictureGear
Pocket quits automatically and the home screen appears.
For further information, refer to the online manual for MS Autorun.
Note
If “Internal” is displayed at the top center of the PictureGear Pocket screen
during operation described above, the image files stored in your CLIÉ handheld
are displayed.
To view image files stored in the Memory Stick media, tap the arrow V on the top
center of the screen to select “MS.”
Setting the Memory Stick automatic start function (MS Autorun)
To use the auto-run function with this example
Chapter 4
101
How to read the online manual
Detailed information on MS Autorun software is provided in the
online manual on the supplied CD-ROM.
To view the online manual, the Adobe Acrobat Reader version 4.0 or
higher must be installed on your computer.
1
Insert the supplied CD-ROM into your computer’s CDROM drive.
The install screen appears automatically.
2
3
Click Manuals.
Double-click MSAutorun Manual.pdf.
The online manual appears.
If the Acrobat Reader software is not installed/updated
1
Insert the supplied CD-ROM into your computer’s CDROM drive.
The install screen appears automatically.
102
2
3
Click Exit.
4
Right-click the CD-ROM drive icon, then click Open from
the shortcut menu.
5
6
7
Double-click the PC folder.
Double-click the My Computer icon on the Windows
desktop.
Double-click the Acrobat folder.
Double-click ar500enu.exe to install the Acrobat Reader
onto your computer.
Chapter 5
Copying the data to the Memory Stick media
on your CLIÉ handheld (MS Import/Export)
This chapter explains how to copy the data on your
computer to the Memory Stick media on your CLIÉ
handheld directly without performing HotSync operation.
Chapter 5
What you can do with the MS Import/
Export applications
Both Memory Stick (MS) Import and Memory Stick (MS) Export are
applications designed to help you copy the data on your computer to
the Memory Stick media on your CLIÉ handheld directly without
performing a HotSync operation.
When copying the data on your computer
You have to use both the MS Import application for your CLIÉ
handheld and the MS Export software for your computer at the same
time.
Before using MS Import/Export
The MS Import application is already installed on your CLIÉ
handheld, but you have to install the MS Export software to your
computer (page 105).
Installing CLIÉ applications without performing a HotSync
operation
Using MS Import/Export, you can install application files (.prc or
.pdb) for your CLIÉ handheld without performing a HotSync
operation.
Using your CLIÉ handheld as a removable disk
Using MS Import/Export, you can use your CLIÉ handheld as you
would have a removable disk from the Windows desktop on your
computer. You can not only read the data stored in the Memory Stick
media on your CLIÉ handheld from your computer, but also write
data to the Memory Stick media from your computer.
104
Installing
1
Insert the installation CD-ROM into the CD-ROM drive of
your computer.
The setup program starts automatically.
2
3
Click Install CLIÉ Utilities.
Click Install Memory Stick Export.
The installation starts.
Follow the instructions displayed on the screen.
After the installation is completed, the installation screen reappears.
4
Click Exit.
The installation of MS Export software ends.
Copying the data to the Memory Stick media on your CLIÉ handheld (MS Import/Export)
You need to install the the MS Export software to your computer. (The
MS Import application is already installed on your CLIÉ handheld).
Chapter 5
105
Installing CLIÉ applications using
MS Import/Export
You can install applications for your CLIÉ handheld into the Memory
Stick media without performing HotSync operation if you use MS
Import/Export.
1
Connect the cradle to a computer in which you have
installed the MS Export software.
2
3
4
Insert the Memory Stick media into your CLIÉ handheld.
Place your CLIÉ handheld on the cradle.
On the home screen, rotate the Jog Dial navigator to
select MS Import and then press the Jog Dial navigator.
MS Import starts.
Or, tap the MS Import icon on the home screen.
5
Drag and drop add-on application files (.prc or .pdb) for
your CLIÉ handheld to the MS Export shortcut icon on
your Windows desktop.
These files are automatically copied to the appropriate folders.
If the application file type could not be recognized by the
MS Export
The Entry Form dialog box appears.
In this case, enter the application name and destination folder to
which the application will be copied.
6
When you finish, tap Disconnect or tap Home
.
Note
Do not remove the Memory Stick media while connecting to your computer.
If your computer is Windows 2000/Windows Me
A warning message appears when you tap Disconnect on your CLIÉ
handheld.
Click OK, and then continue operations.
106
Start MS Export again, then click the Memory Stick Drive tab of the MS
Export software.
Note
You cannot copy applications by dragging them to the Memory Stick Drive
window of the MS Export software.
Copying the data to the Memory Stick media on your CLIÉ handheld (MS Import/Export)
Confirming the contents of the Memory Stick media after
copying the application
Chapter 5
107
Using your CLIÉ handheld as a removable
disk
1
Connect the cradle to a computer in which you have
installed the MS Export software.
2
3
4
Insert the Memory Stick media into your CLIÉ handheld.
Place your CLIÉ handheld on the cradle.
On the home screen, rotate the Jog Dial navigator to
select MS Import and then press the Jog Dial navigator.
MS Import starts.
Or, tap the MS Import icon on the home screen.
5
Operate the desired file or data using Windows Explorer,
etc.
Not only can you copy or delete data stored in the Memory Stick
media, but you can also write data in your computer to the Memory
Stick media.
Note
When you copy the application to the PALM/Launcher folder of the
Memory Stick media, some applications on your CLIÉ handheld may not
display the file list of the Memory Stick media appropriately.
6
When you finish the operation, tap Disconnect or tap
Home
.
Note
Do not remove the Memory Stick media while connecting to your computer.
If your computer is Windows 2000/Windows Me
A warning message appears when you tap Disconnect on your CLIÉ
handheld.
Click OK, and then continue with the operations.
108
How to read the online manual
1
Insert the supplied CD-ROM into your computer’s CDROM drive.
The install screen appears automatically.
2
3
Click Manuals.
Double-click MSImport.pdf.
The online manual appears.
If the Acrobat Reader software is not installed/updated
1
Insert the supplied CD-ROM into your computer’s CDROM drive.
The install screen appears automatically.
2
3
Click Exit.
4
Right-click the CD-ROM drive icon, then click Open from
the shortcut menu.
5
6
7
Double-click the PC folder.
Double-click the My Computer icon on the Windows
desktop.
Double-click the Acrobat folder.
Double-click ar500enu.exe to install the Acrobat Reader
onto your computer.
Copying the data to the Memory Stick media on your CLIÉ handheld (MS Import/Export)
Detailed information on the MS Import/MS Export software is
provided in the online manual on the supplied CD-ROM.
To view the online manual, the Adobe Acrobat Reader version 4.0 or
higher must be installed on your computer.
Chapter 5
109
110
Chapter 6
Troubleshooting
This chapter explains how to troubleshoot your problems
on using your CLIÉ handheld.
Chapter 6
Problems for Audio Player
On playback
The number of the audio files do not appear when I start the
Audio Player.
, If the Memory Stick media you inserted has many audio files
recorded, you may not be able to operate the CLIÉ handheld for
a few seconds; this is not a malfunction.
There is no sound.
, Adjust the volume.
The volume does not increase.
, Cancel the AVLS function. (page 36)
Sound skips.
, Playback sound may be distorted when you tap REVERSE or
SHUFFLE during playback; this is not a malfunction.
Sound skips or noise occurs.
, When you operate other applications or data processing during
playback, noise may occur.
Sound is distorted.
, Record audio files with the higher bit rate value.
There is no sound from one of the channels of the headphones.
, Make sure that the headphones plug is connected securely.
Cannot locate the next track.
, During shuffle playback with the repeat function turned off,
you cannot locate the next track when you play the last track of
the album. In this case, set the playback mode to ALL REP and
then locate the track.
112
The playback suddenly stopped.
, The battery is exhausted. You need to recharge it.
, The connector of the Memory Stick media may be dirty.
Remove and insert it several times.
Cannot play audio files which have playback limitations.
, You cannot play such files beyond the limited period.
The buttons on the remote controller do not operate.
, Make sure the HOLD switch on the remote controller is not set
to HOLD.
On connection with the computer
The computer does not identify the CLIÉ handheld when you
place it on the cradle.
, Make sure your CLIÉ handheld is in the transfer mode.
, It may take a few seconds to identify your CLIÉ handheld with
OpenMG authentication. Wait a moment.
, If you use other applications on your computer, exit them and
then place your CLIÉ handheld on the cradle again. If the
trouble continues, restart your computer.
, Make sure the your cradle is correctly connected to your
computer.
, Connect the supplied AC power adapter to the cradle.
, Make sure the cradle is correctly connected to your computer.
, Make sure your CLIÉ handheld is correctly placed on the
cradle.
Chapter 6
113
Troubleshooting
The connection abruptly shuts itself off.
Problems for Audio Player
Only a few songs can be Checked-Out (The recordable time is
short).
, The free memory space of the Memory Stick media in your
CLIÉ handheld may be smaller than the size of the audio files
you want to Check-Out. Check-In unnecessary songs to make
more memory space.
Audio files in the Memory Stick media do not appear on the
computer’s screen despite being connected.
, Insert the Memory Stick media and then reconnect the CLIÉ
handheld to your computer.
The computer/CLIÉ handheld do not operate normally when
they are connected.
, If you are connecting both devices with a USB hub or a USB
extension cable, normal operation is not guaranteed. Please use
the supplied dedicated USB cable only.
Others
The CLIÉ handheld’s usual operating sounds cannot be heard.
, When the headphones are connected to the CLIÉ handheld, the
system beep, alarm and game sounds can only be heard
through them.
Cannot insert the Memory Stick media in the slot.
, Make sure you insert the Memory Stick media in the correct
direction.
The Memory Stick media do not work.
, If you format your Memory Stick media using your computer,
further operation with your CLIÉ handheld is not guaranteed.
Format the Memory Stick using the CLIÉ handheld according
to the procedures in the Operating Instructions manual.
114
Cannot operate the CLIÉ handheld for a few seconds after
inserting the Memory Stick media.
, When you insert the Memory Stick media which has many
audio files recorded on it, you may not be able to operate your
CLIÉ handheld for a few seconds; this is not a malfunction.
Wait until the title of the audio file appears or the Memory Stick
indicator stops flashing.
Troubleshooting
Chapter 6
115
Index
A
ATRAC3 format audio files
G
gMovie player
To enjoy ATRAC3 format
audio files .................................... 10
What you can do with the gMovie
player software ............................ 86
Playing movies with your CLIÉ
handheld ...................................... 88
Transferring movies to your CLIÉ
handheld ...................................... 88
Playing movies ............................. 90
Playing sample movie files ........... 92
Menu items .................................. 94
Audio Player
Changing the background design .. 46
Importing audio files into your
computer ...................................... 17
Menu items .................................. 61
Notes on playing audio files ......... 56
Playing audio files on your CLIÉ
handheld ...................................... 32
Playing audio files with the
supplied remote controller ........... 42
Playing in various modes .............. 37
Protecting from accidental pressure
on its controls ............................... 44
Selecting playback audio files
(Pick up) ....................................... 38
Switching the album
(Custom album) ............................ 45
Switching the display ................... 39
Switching the Jog Dial navigator
function for Audio Player .............. 40
Transferring audio files from your
computer to your CLIÉ handheld .. 27
What you can do with the Audio
Player ............................................. 8
Troubleshooting .......................... 112
C
Check-In/Out ............................. 51, 53
Connecting/attaching the supplied
headphones ................................... 32
116
H
Headphones .................................... 32
Help file ........................................... 59
I
Installing
Installing audio software .............. 11
Installing OpenMG Jukebox
software ....................................... 14
Installing the PhotoStand application
to your CLIÉ handheld ...................... 65
Installing the PictureGear 4.4Lite
software to your computer ........... 66
Installing RealJukebox for Sony
software ....................................... 12
Installing skin files to your
CLIÉ handheld .............................. 46
M
Memory Stick media
Notes on Memory Stick media ..... 48
Viewing image files stored in
Memory Stick media ..................... 73
Saving image files stored on a
Memory Stick media to your CLIÉ
handheld (Import) ........................ 76
Saving image files stored on your
CLIÉ handheld to a Memory Stick
media (Export) .............................. 75
Setting the Memory Stick automatic
start function (MS Autorun) ............ 97
OpenMG Jukebox
Differences between the HotSync
operation and the Check-In/Out
procedure ..................................... 53
Installing OpenMG Jukebox
software ....................................... 14
Notes on using OpenMG Jukebox 51
On copyright protection ............... 52
Restrictions on copyright protection
by OpenMG .................................. 58
Menu items
Audio Player ................................. 61
gMovie player .............................. 94
PictureGear Pocket ....................... 82
MP3 format audio files
Importing MP3 audio files into your
computer ...................................... 23
To enjoy MP3 format audio files ....... 9
Transferring MP3 format audio files
to your CLIÉ handheld .................. 29
MS Autorun
Setting Auto-run for
an Application ............................ 100
What you can do with MS Autorun
application ................................... 98
MS Import/Export
O
Online manual
Displaying image files one after
another (PhotoStand) ..................... 78
Making a PhotoStand setting ....... 78
Menu items .................................. 82
Saving image files stored on a
Memory Stick media to your CLIÉ
handheld (Import) ........................ 76
Saving image files stored on your
CLIÉ handheld to a Memory Stick
media (Export) .............................. 75
Starting PhotoStand ..................... 79
Transferring image files to your
CLIÉ handheld .............................. 67
Viewing image files stored in
Memory Stick media ..................... 73
Viewing image files stored in your
CLIÉ handheld .............................. 67
Viewing image files with your CLIÉ
handheld ...................................... 69
Viewing sample image files .......... 80
What you can do with PictureGear
Pocket ........................................... 64
Continued on next page
117
Chapter 6
Audio Player ................................. 60
PictureGear Pocket ....................... 81
gMovie player .............................. 93
MS Autorun ................................ 102
MS Import/Export ....................... 109
PhotoStand ...................................... 78
PictureGear Pocket
Troubleshooting
Installing CLIÉ applications using
MS Import/Export ....................... 106
Using your CLIÉ handheld as a
removable disk ........................... 108
What you can do with MS Import/
Export application ...................... 104
P
Playing audio files
See “Audio Player”
Playing movie files
See “gMovie player”
R
Real Jukebox
Installing RealJukebox for Sony
software ....................................... 12
Notes on using RealJukebox
for Sony ....................................... 50
T
Transfer mode .................................. 28
Troubleshooting ............................. 111
V
Viewing image files
See “PictureGear Pocket”
W
WAV format audio files
Importing WAV audio files into your
computer ...................................... 23
Windows 2000 .................... 14, 31, 57
Windows Me ............................. 14, 31
WMA format audio files .................. 22
WMT format audio files .............. 22,23
118
For the latest support information,
check our official Sony CLIÉ Web site
http://www.sony.com/clie/
Printed in Japan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement