Niles DS 7MP, DS 7PR, DS 7HD, DS 8PR, DS 8HD, DS 7Si, DS 7FX, DS 8FX ceiling loudspeaker Installation Guide

DirecteD SounDfielD™

I N S T A l l A T I o N G u I d e

DeSiGner AeStHeticS

ADvAnceD tecHnoloGy

CONGRATULATIONS!

Thank you for choosing Niles DS Loudspeakers. With proper installation, use, and care, your loudspeakers will deliver years of listening enjoyment. Niles manufactures the industry’s most comprehensive line of custom installation components and accessories. For information on our complete product assortment, please visit us at:

www.nilesaudio.com.

TABLE OF CONTENTS

Introduction 3

Features and Benefits 3

Parts Guide

Installation Considerations

Installing the Loudspeakers

Adjusting the Pivoting Woofer and Tweeter

Switch Adjustments

Painting the Grilles

Installing the Grilles 9

Applications 10

9

9

Specifications 12

6

8

4

4

WWW.NILESAUDIO.COM

DirecteD SounDfielD™

LEFT/CENTER/RIGHT CEILING-MOUNT LOUDSPEAKERS

DS7 DS8

DS7

DS7

DS8

SURROUND EFFECTS CEILING-MOUNT LOUDSPEAKERS

DS7 DS8

STEREO INPUT CEILING-MOUNT LOUDSPEAKER

DS7

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-305-238-4373

2

INTRODUCTION

Niles DS Loudspeakers deliver an uncompromising combination of designer oriented aesthetics, superb sound performance, and ease of installation. Small footprint and low profile, MicroThin™ magnetically attached grilles provide the look that homeowners desire. Available in 7” and 8” versions, there are left/center/ right, surround effects, and stereo input models to satisfy applications ranging from advanced home theaters to distributed audio systems. Niles’ patented

Directed Soundfield™ pivoting woofer technology precisely directs the sound to the listening area for the best possible audio performance.

FEATURES AND BENEFITS

DESIGNER AESTHETICS

Magnetically attached MicroThin™ round speaker grilles ensure a clean, unobtrusive designer appearance that blends with the room’s aesthetics. Optional square grilles provide added design flexibility.

SUPERIOR SOUND QUALITy

Patented Directed Soundfield™ technology

*

precisely directs the sound to the listening area for better sound quality. New patent-pending pivot mechanism provides for smooth adjustment and holds the loudspeaker securely in position.

INSTALLATION EASE

Three patent-pending, spring tensioned mounting clamps permit quick installation and compensate for uneven mounting surfaces and varied environmental conditions. Weather-resistant construction enables installation in moist areas such as bathrooms or outdoors under eaves.

INSTALL WITH CONFIDENCE

The best-built loudspeakers deserve the best protection—the Niles Lifetime

Limited Warranty.

3

* U.S. Patent 6,070,694

WWW.NILESAUDIO.COM

DirecteD SounDfielD™

PARTS GUIDE

PACKAGE CONTENTS:

DS7MP, DS7PR, DS7HD, DS8PR, DS8HD, DS7Si

(1) Niles DS loudspeaker, (1) Magnetically attached round grill, (1) Hole template with painting standoffs, (1) Owner’s manual with warranty information

PACKAGE CONTENTS:

DS7FX, DS8FX

(2) Niles DS loudspeakers, (2) Magnetically attached round grilles, (2) Hole templates with painting standoffs, (1) Owner’s manual with warranty information

INSTALLATION CONSIDERATIONS

Recommended tools for installation:

• Cordless screwdriver

• One inch #2 Phillips tip

• 1/8” Drill bit

• Drywall saw

• Laser plumb bob

• 12” -14” Coat hanger wire

• Measuring tape

• Stud finder

• Spackle

• Wire stripper

• Cable ties

• Pencil

7” DS louDSpeakerS

These require an 8-1/2” (21.6 cm) diameter hole opening and a minimum of 6” (15.25 cm) depth when measured from the exterior face of the drywall. To the sides of the hole you will need 1” for the mounting tabs to clamp the speaker to the drywall.

6” (15.25 cm)

Depth Behind

Drywall

8” DS louDSpeakerS

These require a 9-3/4” (24.8 cm) diameter hole opening and depth of 6” (15.25 cm) from the face of the drywall. To the sides of the hole you will need 1” for the mounting tabs to clamp the speaker to the drywall.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-305-238-4373

• Painters tape

• Drop cloth

• Optional - a 24” x 24” piece of R19 insulation

DS7 8-1/2” (21.6 cm)

DS8 9-3/4” (24.8 cm)

Diameter Hole Opening

Figure 1. Required dimensions for installation in ceiling.

(continued on next page)

4

5

INSTALLATION CONSIDERATIONS

continueD

If you are going to use the optional

Niles Rear Wave Enclosure, you will need an additional 2” of depth and

10” clearance to one side of the loudspeaker opening.

note: Be veRy caReful When locating the speakeRs. veRify all locations aRe cleaR of oBstRuctions BefoRe cutting the fiRst hole.

RWe Rear Wave enclosure*

RWe-7c Stock# FG01643

RWe-8c Stock# FG01644

Each speaker requires two-conductor wiring of sufficient gauge. The gauge depends on the length of the wire. For recommendations, please refer to ( Figure 2).

(Stereo Input loudspeakers require four-conductor wiring).

distance from speaker to amplifier

Less than 80 feet

80 to 200 feet

More than 200 feet

Figure 2. Speaker Wire Gauge Guide

Wire gauge

16

14

12

When running loudspeaker wire inside walls or ceilings, use special jacketed cable (CL-2 or CL-3 rating) to protect the wire and for fire prevention. In some municipalities, conduit is required. For a trouble-free installation, low voltage wire such as loudspeaker wire must be in accordance with the National Electrical Code and any applicable provisions of the local building code. If you are unsure of the correct installation techniques, wire jacket, or type of conduit to use, consult a professional audio/video installer, building contractor, or the local building and inspection department.

*

Not for use with SI Speakers

WWW.NILESAUDIO.COM

DirecteD SounDfielD™

INSTALLING THE LOUDSPEAKERS

It is often easier to lay the speakers out on the floor and then transfer the locations to the ceiling with a laser plumb bob. If you are using new construction brackets, place string across the centers of the bracket to provide a way to align the bracket to the laser. Remember, you will need 1” to the sides of the mounting hole for the mounting clamps to secure the speaker to the drywall.

1. Once you have determined a possible position for the hole cutout, drill a

1/8” pilot hole just barely through the ceiling (1/2” to 5/8” deep in most homes) in the center of your proposed loudspeaker location.

Be VerY

CareFul NoT To DrIll THrouGH eXISTING WIreS, pIpeS, or

STruCTure. IF You Feel aNY eXTra reSISTaNCe aS You are

DrIllING, STop.

2. Cut a foot-long piece of coat hanger. Bend the wire (creating a right angle) leaving 5-1/2” at one end (this allows for the extra width of the mounting dogs). Poke the “L-shaped” wire into the pilot hole and turn it in a complete circle and move it into the ceiling cavity to make sure you have approximately 6” of depth. If the wire’s movement is obstructed by anything, fill the hole(s) with spackle and try another location. (If there is any risk of uninsulated electrical connections within the ceiling area, use insulating gloves or other materials or consult with an installation professional before proceeding).

3. If the coat hanger moves freely in a complete circle and you have sufficient depth, tape the template to the ceiling and proceed to layout the other speakers. Once you are comfortable with all speaker locations, use a pencil to lightly outline the circular template.

4. Drill the starting point of your cut with a 1/4” bit.

5. If you are cutting drywall, use a sheetrock or keyhole saw. Cut the hole with the saw at a 45° angle. That way the drywall section can be replaced cleanly if there is an unseen obstruction behind the wall.

IMporTaNT: Be

VerY CareFul NoT To SaW THrouGH eXISTING WIreS, pIpeS, or STruCTure. IF You Feel eXTra reSISTaNCe aS You are

CuTTING, STop.

note: do not install loudspeakeRs BefoRe the dRyWall has Been completely finished and painted.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-305-238-4373

(continued on next page)

6

INSTALLING THE LOUDSPEAKERS

continueD

6. Prep the speaker wire by stripping 1/4”-1/2” from each speaker lead.

Twist the strands or tin the leads with solder to ensure there are no stray strands that could short and possibly harm the amplifier.

7. If you’ve chosen to use insulation behind the loudspeaker, place it through the hole and center it on the opening. If using paper-backed insulation, it should be placed so that the paper side is away from the loudspeaker.

8. The speaker has black and red spring-loaded connectors ( Figure 3).

Black is for the negative (-) wire and red for the positive (+). It is important to observe correct wiring polarity.

This is especially important for the

Stereo Input (SI) Loudspeaker. If you have wire other than black and red, make sure you connect it the same on the amplifier end as the speaker end. Failure to do so will adversely affect the loudspeakers’ performance.

Figure 3. Spring-loaded speaker wire connectors.

9. Once the speaker wires are connected, carefully slide the loudspeaker into the opening hole

( Figure 4). While holding the speaker in place, tighten the mounting screws to secure the speaker to the drywall.

We recommend using a motorized screwdriver. Be careful not to over tighten. The DS loudspeakers feature spring loaded mounting clamps that allow the speaker to remain flush with the ceiling, even if the drywall shifts or expands.

7

note: do not caRRy the speakeR

By the tWeeteR oR tWeeteR

BRidge. this may damage the speakeR.

Mounting clamps require

1” clearance to the sides of the hole opening

Figure 4. Installing a

DS loudspeaker.

WWW.NILESAUDIO.COM

DirecteD SounDfielD™

ADJUSTING THE PIVOTING WOOFER AND TWEETER

DS loudspeakers feature the patented Directed Soundfield™ woofer pivot mechanism that enables the loudspeaker to direct the sound to the listening area

( Figure 5). The tweeter(s) pivot independently of the woofer to provide additional control of the sound. Adjusting the woofer angle will affect the tweeter angle, so always begin by adjusting the woofer.

1. Press the outside edge of the woofer on the plastic, not the rubber, and slide the speaker until it is facing the primary listening position. The woofer adjusts approximately 15-degrees. Do not force the speaker.

2. After adjusting the woofer, adjust the tweeter by pressing on the outside edge of the tweeter to point to the listening area.

Figure 5. Aim woofer and tweeter towards listener area.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-305-238-4373

8

SWITCH ADJUSTMENTS

TWEETER SWITCH

(DS7MP, DS7PR, DS7HD, DS8PR, DS8HD, DS7Si)

The three-position tweeter switch allows you to adjust the high frequency output of the loudspeaker to compensate for room acoustics. The center position does not affect the tweeters output. Moving the switch to the – position reduces the tweeter output by 3 dB to compensate for bright rooms (tile or wood floors, spare furnishing, tall ceilings). Moving the switch to the + position increases the tweeter output by 3 dB to compensate for absorptive rooms (carpeting, lots of drapery, plush furniture, etc.).

DIALOG COMPENSATION SWITCH

(DS7MP, DS7PR, DS7HD, DS8PR, DS8HD, DS7Si)

This switch provides additional definition at critical midrange frequencies where the human voice is reproduced. This switch is generally used only for home theater center speaker applications. Engage the switch if you wish to enhance the dialog.

DIFFUSE / DIRECT SWITCH

(DS7FX, DS8FX)

Use the Diffuse setting for movies and general music listening since most films are mixed using non-localized surround effects and music is usually recorded in a favorable acoustic environment. Use the Direct setting for discrete multi-channel recordings that equally emphasize front and surround sounds. For 7.1-channel surround sound systems, use the Diffuse setting on the side effects loudspeakers and the Direct setting for the rear effects loudspeakers.

PAINTING THE GRILLES

The DS loudspeaker grilles can be painted without priming, but the fabric scrim must first be removed. The installation template has die cut standoffs that can be used to position the grille off the ground while painting. Use several light coats sprayed from different sides and angles to cover all surfaces and not fill in any holes. If you do fill some holes, use compressed air to open them before the paint dries. It may be helpful to dilute the paint.

INSTALLING THE GRILLES

9

The Niles MicroThin™ speaker grille installs magnetically over the speaker.

Carefully center the grill over the speaker and let the magnets do their work, verifying that the grill sets flush against the ceiling at all edges.

WWW.NILESAUDIO.COM

DirecteD SounDfielD™

APPLICATIONS

Niles DS Loudspeakers are designed to be installed in any standard ceiling.

When choosing a location, thought should be given to the sound coverage of the loudspeaker, and ease of running the speaker wire.

STEREO SOUND APPLICATIONS

The best stereo effect will be achieved if both loudspeakers are at an equal distance from the listening area. Ideally all loudspeakers should be on the same horizontal plane ( Figure 6). Avoid installing loudspeakers near corners to prevent a “boomy” or diffracted sound. Also note that the lower the ceiling, the closer the loudspeaker should be placed to the listener.

HOME THEATER APPLICATIONS

left/Center/right – Position the center channel loudspeaker directly over the television, with the left and right speakers equidistant from the center. The separation between the left and right should not be more than the distance to the primary seating area ( Figure 7).

LCR

Figure 6. Stereo Sound Application.

LCR LCR

Side Surround effects – Position surround effects loudspeakers to the sides of the listening area with the tweeters in-line with the listener. The tweeters should point to the front and rear of the room ( Figure 7).

rear Surround effects – Position surround effects loudspeakers behind the listening area, to the inside of the front left and right speakers. The tweeters should point to the sides of the room ( Figure 7).

FX FX

FX

Critical

Listening

Position

FX

Figure 7. Home Theater Application.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-305-238-4373

(continued on next page)

10

11

APPLICATIONS

continueD

SINGLE SPEAKER STEREO INPUT APPLICATIONS

Stereo Input loudspeakers are ideal for small rooms where positioning two loudspeakers is not practical. Examples would be a small kitchen, bathroom, hallway, or small bedroom. Locate the loudspeaker as close to the center of the room as possible for the most even distribution of sound ( Figure 8). Avoid installing the loudspeaker near a corner to prevent a “boomy” or diffracted sound.

Figure 8. Single Loudspeaker Stereo Input Application.

WWW.NILESAUDIO.COM

DirecteD SounDfielD™

SPECIFICATIONS

model Woofer tweeter / midrange

Recommended amplifier power normal impedance frame dimensions with grille hole cut-out dimensions depth (5/8” drywall ceiling)

DS7MP

7” glass fiber woofer cone

1” UltraSilk

® soft dome

10-130 watts

8 ohm nominal;

6 ohm minimum

9-7/8” (21.15 cm)

8-1/2”

(21.6 cm)

5-5/16”

(13.6 cm)

DS7PR

.

7” glass fiber woofer cone

1” fluid-cooled

Teteron

®

dome

10-130 watts

8 ohm nominal;

6 ohm minimum

9-7/8” (21.15 cm)

DS7HD

7“ IMPACT

(Improved

Aluminum

Ceramic

Technology) cone

1” nano-coated

IMPACT dome

DS7FX

7” glass fiber woofer cone

Dual 1” fluid-cooled

Teteron

® domes

10-160 watts

10-140 watts

8 ohm nominal;

6 ohm minimum

9-7/8” (21.15 cm)

8 ohm nominal;

6 ohm minimum

9-7/8” (21.15 cm)

8-1/2”

(21.6 cm)

8-1/2”

(21.6 cm)

8-1/2”

(21.6 cm)

DS7SI

7” glass fiber woofer cone

Dual 1”

UltraSilk ® domes

soft 10-130 watts

8 ohm nominal;

6 ohm minimum

9-7/8” (21.15 cm)

9-3/4”

(24.76 cm)

DS8PR

8” glass fiber woofer cone

1” fluid-cooled

Teteron ® dome / 1-1/2” fluid-cooled

Teteron

®

dome

DS8HD

8” IMPACT

(Improved

Aluminum

Ceramic

Technology) cone

1” nano-coated

IMPACT dome

DS8FX

8” IMPACT

(Improved

Aluminum

Ceramic

Technology) cone

Dual 1” nanocoated IMPACT domes

10-140 watts

10-160 watts

10-160 watts

8 ohm nominal;

6 ohm minimum

11-1/4” (28.52 cm)

8 ohm nominal;

6 ohm minimum

11-1/4” (28.52 cm)

8 ohm nominal;

6 ohm minimum

11-1/4” (28.52 cm)

9-3/4”

(24.76 cm)

9-3/4”

(24.76 cm)

9-3/4”

(24.76 cm)

5-5/16”

(13.6 cm)

5-5/16”

(13.6 cm)

5-5/16”

(13.6 cm)

5-5/16”

(13.6 cm)

5-5/16”

(13.6 cm)

5-5/16”

(13.6 cm)

5-5/16”

(13.6 cm)

model

RWE7C

RWE8C

description

7” Rear Wave Enclosure

8” Rear Wave Enclosure

additional depth Behind ceiling

1-13/16”

1-15/16”

additional side clearance

10”

10”

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-305-238-4373

12

13

BY PHONE (IN USA)

1-800-BUY-HIFI (289-4434)

BY PHONE (OUtSIdE USA)

1-305-238-4373

CUStOmEr SErvICE HOUrS

8:00 AM to 5:30 PM ET

tECHNICAl SUPPOrt HOUrS

8:00 AM to 7:00 PM ET

ON tHE wEB

www.nilesaudio.com

EmAIl tECHNICAl SUPPOrt

[email protected]

EmAIl fOr PrOdUCt SUggEStIONS

[email protected]

WWW.NILESAUDIO.COM

DirecteD SounDfielD™

LIMITED WARRANTy

Niles Audio Corporation (“NILES”) warrants to the original retail purchaser only that this product will be free of manufacturing defects in material and workmanship for the following periods and subject to the limitations and exclusions set forth below:

Lifetime Warranty

All Passive Loudspeaker Products (those not requiring AC or battery power).

Ten years from the date of purchase

All Other Passive Products (those not requiring AC or battery power).

Two years from the date of purchase

All Active Products (those requiring AC or battery power).

This warranty is not transferable to subsequent purchasers of the product. To obtain warranty service, contact the authorized dealer where you purchased your product or take the unit to the nearest authorized NILES dealer (with proof of purchase – claims made without proof of purchase will be denied) who will test the product and if necessary, forward it to NILES for service. If there are no authorized NILES dealers in your area, you must contact NILES to receive a factory Return Authorization Number. DO NOT RETURN

ANY UNIT WITHOUT FIRST RECEIVING WRITTEN AUTHORIZATION AND SHIPPING INSTRUCTIONS FROM NILES.

Upon examination, NILES will, at its sole option and expense, repair or replace any product found to be defective. NILES will return the repaired or replaced unit to you via its usual shipping method from the factory to your address in the United States of America or

Canada only. Any shipping costs for addresses outside of the United States or Canada shall be the responsibility of the purchaser.

In the event that this model is no longer available and cannot be repaired effectively, NILES, at its sole option, may replace it with a different model of equal or greater value, or refund the original purchase price paid.

THe ForeGoING are Your eXCluSIVe reMeDIeS For BreaCH oF WarraNTY.

This Warranty does not include service or parts to repair damage caused by improper use or handling, including but not limited to damage caused by accident, mishandling, improper installation, commercial use, abuse, negligence, or normal wear and tear, or any defect caused by repair to the product by anyone other than NILES.

This warranty does not cover reimbursement for your costs of removing and transporting the product for warranty service evaluation, or installation of any replacement product provided under this warranty.

This Warranty will be void if:

• the Serial Number on the product has been removed, tampered with or defaced.

• the product was not purchased from an authorized dealer or reseller.

THe ForeGoING WarraNTIeS are eXCluSIVe aND IN lIeu oF all oTHer eXpreSSeD aND IMplIeD WarraNTIeS.

NIleS eXpreSSlY DISClaIMS all SuCH oTHer WarraNTIeS, INCluDING BuT NoT lIMITeD To IMplIeD

WarraNTIeS oF MerCHaNTaBIlITY, FITNeSS For a parTICular purpoSe aND NoN-INFrINGeMeNT, WITH reSpeCT

To THe proDuCT. To THe MaXIMuM eXTeNT perMITTeD BY laW, NIleS SHall NoT Be reSpoNSIBle For aNY

INCIDeNTal or CoNSeQueNTIal DaMaGeS eXCepT To THe eXTeNT proVIDeD (or proHIBITeD) BY applICaBle

laW, eVeN IF NIleS HaS BeeN aDVISeD oF THe poSSIBIlITY oF SuCH DaMaGeS.

Notwithstanding the above, if you qualify as a “consumer” under the Magnuson-Moss Warranty Act, or applicable state laws, then you may be entitled to any implied warranties allowed by law for the Warranty Period. Further, some states do not allow limitations on how long an implied warranty lasts or allow the exclusion or limitation of consequential damages, so such limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For the name of your nearest authorized NILES dealer, contact: NILES AUDIO CORPORATION, P.O. BOX 160818, Miami, Florida

33116-0818, or call 1-800-289-4434, 1-305-238-4373. Please be advised that NILES only sells its products via the Internet through a select group of authorized Internet dealers. These are listed on our website at www.nilesaudio.com. Products offered on the

Internet through unauthorized Internet dealers are not covered by the NILES warranty and may be either:

1) goods acquired on a secondary or grey market

2) counterfeit or stolen goods

3) damaged, or defective goods

Please fill in your product information and retain for your records.

Model ______________________ Serial No. _____________________________________________ Purchase Date ______________

aTTeNTIoN: To our ValueD CoNSuMerS:

To insure that consumers obtain quality pre-sale and after-sale support and service, NILES products are sold exclusively through authorized dealers. This warranty is VOID if the products have been purchased from an unauthorized dealer.

1-800-BUY-HIFI – 1-305-238-4373 – www.nilesaudio.com

©2010 Niles Audio Corporation. All rights reserved. Niles and the Niles logos, ultraSilk,

Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation. directed Soundfield and MicroThin are trademark of Niles Audio Corporation. All other trademarks are the property of their respective owners. designed and engineered in the uSA.

Made in China. dS00719A