Sony | SCP-8500 | User's Manual | Sony SCP-8500 User's Manual

USER GUIDE
SCP - 8500
1AH6P1P0614-Printed in Malaysia
Table of Contents
1. Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2. The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Turning Your Phone ON and OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Navigating Through Phone Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
3. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
4. Your Phone’s Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
TTY Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
5. Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Using Your Phone’s Lock Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Using Special Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Erasing the Phone Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Resetting the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Resetting My Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Resetting Your Picture Message Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Restoring Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Lost or Stolen Phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Security Features for Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
6. Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Call History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Making a Call From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Saving a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Prepending a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . .57
Erasing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
7. Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Displaying the Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Assigning a Group Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Contacts Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Adding a Phone Number to a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . .61
Editing a Contacts Entry’s Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Erasing a Contacts Entry From the List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Assigning an Image to a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Selecting a Ringer for an Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Dialling Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
8. Personal Organiser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Using Your Phone’s Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Using Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
File Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Personal Information Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Downloading Through the Web Wirelessly . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Using Application Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
9. Voice Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Using Voice-Activated Dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Managing Voice/Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Setting the Recording Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Setting the Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Setting the Audio Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Setting the Storage Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Setting Up Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
10. microSD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Using Your Phone’s microSD Card and Adapter . . . . . . . . . . . . . . . . . . . . . . .89
microSD Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
microSD Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Backing Up Your Contacts Data to the microSD Card . . . . . . . . . . . . . . . . . .94
Setting Up the Digital Print Order Format . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Connecting Your Phone to Your PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
11. Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Displaying Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Sending a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Creating Folders for Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
12. Built-in Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Using the Settings & Info Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Storing Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Sending a Picture Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Managing Pictures/Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Printing Pictures Directly From Your Phone . . . . . . . . . . . . . . . . . . . . . . . . .121
13. Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Your Multimedia Channel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Accessing Your Media Player’s Channel Listings . . . . . . . . . . . . . . . . . . . . .123
Playing a Video or Audio Clip in Your Phone . . . . . . . . . . . . . . . . . . . . . . . .123
Multimedia FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
14. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Using Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Turning Bluetooth On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Using the Bluetooth Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
Bluetooth Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
Using the Trusted Devices Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
Printing Data via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Sending Data via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
15. Service Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139
Accessing Mobile Chatrooms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139
Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139
Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
Getting to Know Telecom Mobile Broadband . . . . . . . . . . . . . . . . . . . . . . .143
Exploring the Telecom Music Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
16. Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
SCP-8500
User Guide
Note: Due to possible updates with the phone software, this
printed guide may not include the most current instructions for
your phone.
For further information on Telecom Mobile services, please visit
www.telecom.co.nz/mobile or call *123.
1. Safety Guidelines
Safety
Maintaining Your Phone’s Peak Performance
To maximise performance, do not touch the bottom portion
of your phone, where the internal antenna is located, while
using the phone.
Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the
power off and remove the battery.
Do not expose your phone to direct sunlight for extended
periods of time (such as on the dashboard of a car).
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone
without a hands-free device) is prohibited in some jurisdictions.
Laws vary as to specific restrictions.
Let the person you are speaking to know you are driving; if
necessary, suspend the call in heavy traffic or hazardous
weather conditions.
Do not take notes or look up phone numbers while driving.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any
special regulations in a given area. Turn your phone off in areas
where use is forbidden or when it may cause interference or
danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from
radiofrequency (RF) signals. However, RF signals from mobile
phones may affect inadequately shielded electronic equipment.
RF signals may affect improperly installed or inadequately
shielded electronic operating systems and/or entertainment
systems in motor vehicles. Check with the manufacturer or their
representative to determine if these systems are adequately
shielded from external RF signals. Also check with the
2
1. Safety Guidelines
manufacturer regarding any equipment that has been added to
your vehicle.
Consult the manufacturer of any personal medical devices, such
as pacemakers and hearing aids, to determine if they are
adequately shielded from external RF signals.
Note: Always turn off the phone in health care facilities and request
permission before using the phone near medical equipment.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent
possible interference with aircraft systems, ask permission from
a crew member to use your phone while the plane is on the
ground.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone
off when in a blasting area or in other areas with signs indicating
two-way radios should be turned off. Construction crews often
use remote-control RF devices to set off explosives.
Turn your phone off when you are in any area that has a
potentially explosive atmosphere. Although it is rare, your
phone and accessories could generate sparks. Sparks can cause
an explosion or fire, resulting in bodily injury or even death.
These areas are often, but not always, clearly marked. They
include:
Fuelling areas such as petrol stations.
Below deck on boats.
Fuel or chemical transfer or storage facilities.
Areas where the air contains chemicals or particles such as
grain, dust, or metal powders.
Any other area where you would normally be advised to turn
off your vehicle’s engine.
Note: Never transport or store flammable gas, liquid or explosives in the
compartment of your vehicle that contains your phone or accessories.
1. Safety Guidelines
3
Restricting Children’s Access to Your Phone
Your phone is not a toy. Do not allow children to play with it as
they could hurt themselves and others, damage the phone, or
make calls that increase your telephone bill.
Protecting Your Battery
The guidelines listed below help you get the most out of your
battery’s performance.
Use only approved batteries, AC adapters, and chargers.
These chargers are designed to maximise battery life. Using
other batteries or chargers voids your warranty and may cause
damage.
In order to avoid damage, charge the battery only in
temperatures that range from 0º C to 45º C.
Do not use the battery charger in direct sunlight or in high
humidity areas, such as the bathroom.
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Do not attempt to disassemble or short-circuit the battery.
Do not store the battery in high temperature areas for long
periods of time. It is best to follow these storage rules:
Less than one month:
-20º C to 60º C
More than one month:
-20º C to 45º C
Disposal of Lithium Ion (Li-Ion) Batteries
For safe disposal options of your Li-Ion batteries, please ensure
that disposal of this is in accordance with the law and regulation.
Do not dispose of the battery in fire; the cell may explode.
Do not open or puncture the battery; the released electrolyte
is corrosive and may cause damage to the eyes and skin.
Special Note: Be sure to dispose of your battery properly. In some
areas, the disposal of batteries in household or business trash
may be prohibited.
Note: For safety, do not handle a damaged or leaking Li-Ion battery.
4
1. Safety Guidelines
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this equipment.
Only use approved batteries and chargers. The use of any
unauthorised accessories may be dangerous and void the phone
warranty if the said accessories cause damage or a defect to the
phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
1. Safety Guidelines
5
2. The Basics
Front View of Your Phone
1. Earpiece
2. Main Screen (display)
19. Side Camera Key
3. Side Volume Key
4. Navigation Key
5. Charger Jack
18. microSD Card Slot
6. Softkey (left)
17. Softkey (right)
7. MENU/OK Key
16. Headset Jack
8. Camera Key
15. BACK Key
9. TALK Key
14. END/POWER Key
10. SPEAKER Key
13. Keypad
11. Internal Antenna
12. Microphone
20. Camera Lens
21. LED
Indicator
23. Speaker
22. Outer
Screen
24. Battery
6
2. The Basics
Key Features
1. Earpiece lets you hear the caller and automated prompts.
2. Main Screen (display) displays all the information needed to
operate your phone, such as the call status, the Contacts list,
the date and time, and the signal and battery strength.
3. Side Volume Key allows you to adjust the ringer volume in
standby mode (with the phone open) or adjust the voice
volume during a call. To mute the ringer during an incoming
call, press the Side Volume key up or down. The Side Volume
key can also be used to scroll up or down to navigate through
the different menu options. Press and hold to make a voice
dial or redial with the phone closed.
4. Navigation Key allows you to scroll through menus quickly and
easily. These keys can also be reassigned to create customised
shortcuts. Default settings are: Right: Web, Left: Media Player,
Up: Messaging and Down: My Content.
5. Charger Jack connects the phone to the phone charger
(included).
6. Softkey (left) lets you select softkey actions or menu items
corresponding to the bottom left line on the Main Screen.
7. MENU/OK Key lets you access the phone’s menus and select the
highlighted choice when navigating through a menu.
8. Camera Key lets you access the Pictures menu and take
pictures and videos.
9. TALK Key allows you to place or receive calls, answer Call
Waiting, use Three-Way Calling, or activate voice dial.
10. SPEAKER Key lets you place or receive calls in speakerphone
mode.
11. Internal Antenna facilitates reception and transmission. To
maximise call performance, do not obstruct the internal
antenna area. (See page 16.)
12. Microphone allows other callers to hear you clearly when you
are speaking to them.
13. Keypad lets you enter numbers, letters, and characters, and
navigate within menus. Press and hold keys 2-9 for speed
dialling.
2. The Basics
7
14. END/POWER Key lets you turn the phone on or off, end a call,
or return to standby mode. While in the main menu, it returns
the phone to standby mode and cancels your input. When you
receive an incoming call, press to enter silent mode and mute
the ringer.
15. BACK Key deletes characters from the display in text entry
mode. When in a menu, pressing the BACK key returns you to
the previous menu.
16. Headset Jack allows you to plug in a stereo headset (not
included) for convenient, hands free conversations. CAUTION!
Inserting an incorrect accessory into the accessory jack may
damage the phone.
17. Softkey (right) lets you select softkey actions or menu items
corresponding to the bottom right line on the Main Screen.
18. microSD Card Slot lets you use the microSD card (included) to
expand the memory of your phone. (See “Using the microSD
Card” on page 89.)
19. Side Camera Key lets you access the camera and video mode
and take pictures and videos.
20. Camera Lens, as part of the built-in camera, lets you take
pictures and videos.
21. LED Indicator shows your phone’s connection and charging
status at a glance.
22. Outer Screen lets you monitor the phone’s status and see who
is calling without opening the phone.
23. Speaker lets you hear the different ringers and sounds. You
can mute the ringer when receiving incoming calls by
pressing
,
, or the side keys. The speaker also lets you
hear the caller’s voice in speakerphone mode.
24. Battery powers your phone (Lithium-Ion battery included).
See page 13 for details on charging and recharging.
8
2. The Basics
Viewing the Display Screen
This list identifies the symbols you will see on your display
screen.
indicates your current signal strength. The more lines
you have, the stronger your signal.
indicates your phone cannot find a signal.
indicates the call is on hold.
indicates a call is in progress.
indicates Internet access is dormant. (Voice calls can still
be made or received.)
indicates Internet access is active.
indicates Internet access is disabled.
indicates EVDO service is available.
indicates EVDO service is inactive.
indicates you have missed voice calls.
indicates you have scheduled events or call alarms.
indicates you have alarm clock and/or countdown
notifications.
indicates you have new text messages.
indicates you have new picture messages.
indicates you have new voicemail messages.
indicates you have urgent messages.
indicates you have two or more different types of missed
alerts (missed voice calls and other missed alarm clocks,
call alarms, or scheduled events).
indicates the Bluetooth feature is enabled (blue icon).
indicates the handset is connected to a Bluetooth device
(green icon).
indicates the handset is discoverable by another
Bluetooth device.
indicates the handset is communicating with a Bluetooth
device.
2. The Basics
9
indicates the handset is connected to/communicating
with a Bluetooth device via Hands-free Profile (HFP).
indicates the handset is connected to/communicating
with a Bluetooth device via Advanced Audio Distribution
Profile (A2DP).
indicates the handset is connected to/communicating
with a Bluetooth device via both Hands-free Profile (HFP)
and Advanced Audio Distribution Profile (A2DP).
indicates your access to a secure site.
indicates the level of your battery charge. The more bars
you see, the more power you have left. (The icon is
animated while the battery is charging.)
indicates your battery is charging in “Power Off” state.
indicates all the sound settings (except for applications)
are off and the vibrate feature is set.
indicates volume level 1 to 8 and vibrate feature are set.
indicates a beep sounds once when you receive a phone
call or message, etc.
indicates a beep sounds once when you receive a phone
call or message, etc. and vibrate feature is set.
indicates all ringer settings are off.
indicates all ringer settings are off and the vibrate feature
is set.
indicates all the sound settings are off.
indicates the Location Service of your phone is enabled.
indicates the Location Service of your phone is disabled.
indicates you have a new voice message when Screen
Call is activated.
indicates the Screen Call auto setting is enabled.
indicates the Alarm Clock and/or Countdown is set.
indicates your phone is in TTY mode.
indicates the speakerphone mode is set to on.
indicates a call is in progress using the Bluetooth device.
indicates the wired car kit device is set to on.
10
2. The Basics
indicates the wired headset device is set to on.
indicates a microSD card is inserted in your phone.
indicates you have alert messages from Java applications
activated in the background.
2. The Basics
11
Turning Your Phone ON and OFF
Turning Your Phone On
Press
.
Once your phone is on, it displays “Looking for service...” which
indicates that your phone is searching for a signal. When your
phone finds a signal, it automatically enters standby mode. At
this point, you are ready to begin making and receiving calls.
If your phone is unable to find a signal, a Power Save feature is
automatically activated. When a signal is found, your phone
automatically returns to standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for service by pressing any key (when your phone is
turned on).
Tip: The Power Save feature helps to save your battery power when you
are in an area where there is no signal.
Turning Your Phone Off
Press and hold
for two seconds until you see the
powering down animation on the display screen.
Your screen remains blank while your phone is off (unless the
battery is charging).
12
2. The Basics
Using the Battery
Installing the Battery
To install, insert the battery into the opening on the back of
the phone and gently press down until the latch snaps into
place .
Removing the Battery
Warning! Do not handle a damaged or leaking Li-Ion battery as you can
be burned.
1. Make sure the power is off so that you do not lose any stored
numbers or messages.
2. Push up on the battery release latch
and away from the phone .
and lift the battery up
Charging the Battery
Your phone comes with a rechargeable battery. You should
charge the battery as soon as possible so you can begin using
your phone.
Keeping track of your battery’s charge is important. If your
battery level becomes too low, your phone automatically turns
off and you will lose all the information you were just working
on. For a quick check of your phone’s battery level, glance at the
battery charge indicator located in the upper-right corner of
your phone’s display screen. If the battery charge is getting too
2. The Basics
13
low, the battery icon
warning message.
appears and the phone displays a
Always use an approved travel charger or vehicle power adapter
to charge your battery.
Warning! Using the wrong battery charger could cause damage to your
phone and void the warranty.
Using the Phone Charger
1. Plug the charger into a wall outlet.
2. Plug the other end of the charger into the charger jack on the
side of your phone (with the battery installed).
Charging when your phone is turned on:
The battery icon appears as follows while charging.
→
→
→
The battery icon turns to
when charging is
completed.
Charging when your phone is turned off:
The battery icon
appears, and the message
“BATTERY CHARGING--Power Off--” is shown on the
display while charging. When the battery is completely
discharged, it may take several minutes until the message
is shown on the display. The battery icon turns to
,
and the message changes to “CHARGING COMPLETE-Power Off--” when charging is completed.
Tip: Be sure to watch your phone’s battery strength indicator and charge
the battery before it runs out of power.
Note: You can also charge your phone’s battery with a USB cable (not
included). Simply plug one end of the USB cable into your phone and the
other end into a free USB port on your desktop or laptop computer. (If
your battery has been completely run down, it cannot be charged via the
USB cable.)
14
2. The Basics
Navigating Through Phone Menus
The navigation key on your phone allows you to scroll through
menus quickly and easily. The scroll bar at the right of the menu
keeps track of your position in the menu at all times.
To navigate through a menu, simply press the navigation key up
or down. If you are in a first-level menu (after selecting an item
in the main menu), you may also navigate to the next or previous
first-level menu by pressing the navigation key right or left.
For a diagram of your phone’s menu, please see “Menu
Navigation”on page 30.
Selecting Menu Items
As you navigate through the menu, menu options are highlighted.
Select any numbered option by simply pressing the
corresponding number on the phone’s keypad. You may also
select any item by highlighting it and pressing .
For example, if you want to view your last incoming call:
1. Press
to access the main menu.
Note: You can select List View or Grid View for your phone’s menu style
(see “Changing the Phone’s Menu Style” on page 36).
2. Select Call History by highlighting it and pressing
pressing
(when in List View).
or by
3. Select Incoming by pressing
or by highlighting it and
pressing . (If you have received any calls, they are displayed
on the screen.)
Note: For the purposes of this guide, the above steps condense into
“Select
> Call History > Incoming.”
Displaying Your Phone Number
Select > Settings > Phone Info > My Phone#. (Your phone
number and other information about your phone will be
displayed.)
Tip: You can also display your phone number through the Contacts menu.
> Contacts > My Name Card. To send your contact information
Select
using Bluetooth, press Options (right softkey) > Send via Bluetooth.
2. The Basics
15
Making and Answering Calls
Holding Your Phone
To maximise performance, do not obstruct the bottom portion
of your phone where the internal antenna is located while using
the phone.
Correct
Incorrect
Internal Antenna
Making Calls
To place a call with the phone open:
1. Make sure your phone is on.
2. Enter a phone number from standby mode. (If you make a
mistake while entering, press
to erase one digit at a time.
Press and hold
to erase the entire number.)
3. Press
or
.
4. When you are finished, press
or close the phone.
Tip: You can also place calls from your phone by using speed dialling
(page 24), and by using your Call History listings (page 56).
To redial your most recent call, press
16
2. The Basics
twice.
To place a call with the phone closed:
1. Make sure your phone is on and the Side Key Guard feature is
disabled. (See “Setting the Side Key Guard” on page 48.)
2. Press and hold the Side Volume key on the left side of the
phone.
3. Follow the system prompts and say the name of your
registered voice dial tag (see the note below).
The call will be made in speakerphone mode unless you have a
headset or other accessory attached to the phone.
Note: To use a voice dial, you must have stored voice dial tags. (See
“Using Voice-Activated Dialling” on page 82.)
To redial with the phone closed:
1. Press and hold the Side Volume key. (The name
corresponding to the last dialled number and the number will
be displayed on the Outer Screen if the name and the number
have been stored in your Contacts.)
2. Press the Side Volume key.
Dialling Options
Dialling options are displayed when you press Options (right
softkey) after entering numbers in standby mode:
Contacts Match to place a call using the Contacts Match
feature. (See “Setting Contacts Match” on page 47 and “Using
Contacts Match” on page 24.)
Call to dial the phone number.
Call:Speaker On to dial the phone number in speakerphone
mode.
Send Message to send a text message (see page 100) or a
picture message (see page 116).
Save Phone# to save the phone number in your Contacts. (See
“Saving a Phone Number” on page 22.)
Find to display Contacts entries that end with the digits you
entered (at least four digits). (See “Finding a Phone Number”
on page 23.)
P Hard Pause to insert a hard pause. (See “Dialling and Saving
Phone Numbers With Pauses” on page 23.)
2. The Basics
17
T 2-Sec. Pause to insert a two-second pause. (See “Dialling
and Saving Phone Numbers With Pauses” on page 23.)
Hyphen to insert a hyphen manually where you like.
Answering Calls
To answer an incoming call with the phone open:
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. Press
or
to answer an incoming call. (Depending on
your phone’s settings, you may also answer incoming calls by
pressing any number key. See “Setting Call Answer” on page
46 for more information.)
To answer an incoming call with the phone closed:
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. When your phone rings or vibrates, press and hold the Side
Volume key on the left side of the phone. (The call will be
answered in speakerphone mode.)
– or –
Open the phone to use the earpiece.
Your phone notifies you of incoming calls in the following ways:
The phone rings and/or vibrates.
The LED flashes.
The backlight illuminates.
The screen displays an incoming call message.
If available, the phone number of the caller is displayed.
If the phone number is in your Contacts, the Contacts entry’s
name is displayed.
The following options are also displayed by pressing Options
(right softkey):
18
Answer to answer the call.
Answer:Speaker to answer the call in speakerphone mode.
Select Audio to switch the call to your desired device (if
available).
Answer on Hold to put the call on hold. (See “Setting Answer
on Hold” on page 19.)
2. The Basics
Screen Call to answer the call by using pre-recorded
announcement. (See “Setting Up Screen Call” on page 87.)
Quiet Ringer to mute the ringer. (This feature appears when
the ringer is set.)
Tip: Your phone offers additional ways to answer calls. (See page 46 for
Auto Answer and for Call Answer.)
Setting Answer on Hold
This feature allows you to hold an incoming call when you
cannot answer immediately.
To set Answer on Hold:
When you receive an incoming call, press Options (right
softkey) > Answer on Hold. (The caller hears a message while
waiting for you to answer. will display on the screen while
the call is on hold.)
To resume the call:
Press Answer (left softkey) or
.
– or –
Press Options (right softkey), select Answer or Answer:Speaker.
Ending a Call
Close the phone or press
.
Missed Call Notification
When an incoming call is not answered, the missed call log is
displayed on your screen.
To call the missed call entry from the notification screen:
Press Call (left softkey).
Tip: If you have two or more notifications, the Missed Alerts list will appear.
To display a missed call entry from standby mode:
1. Select
> Missed Alerts.
2. Select the entry you wish to view and press
.
2. The Basics
19
Calling Emergency Numbers
You can place calls to 111 (dial
and press
),
even if your phone is locked or your account is restricted. Once
an emergency call is made, your phone will automatically enter
emergency mode.
Press Options (right softkey) to display your options:
Speaker On to activate speakerphone mode. (If you are in
speakerphone mode, the option will appear as Speaker Off to
deactivate.)
Unlock My Phone to unlock your phone (appears only if the
phone is locked).
Close Menu to close the pop-up menu (appears only if the
phone is unlocked).
Tip: Press My Phone (left softkey) to display your phone number during
an emergency call.
To exit emergency mode:
1. Press
to end an emergency call.
2. Press Options (right softkey) to display the Options menu.
3. Select Exit Emergency.
Note: When you are in emergency mode, you can only exit from the
Options menu.
To use emergency mode options:
1. Press
to end an emergency call.
2. Press Options (right softkey):
Call 111 to call 111 again.
Call 111:Speaker to call 111 in speakerphone mode.
Exit Emergency to exit emergency mode.
3. Highlight an option and press
.
Note: You can also use “112” or “911” for emergency calling.
20
2. The Basics
In-Call Options
During a call, your phone displays menu options by pressing
Options (right softkey):
Flash to answer an incoming call while putting the current call
in Call Waiting.
Mute or Unmute to mute or reactivate your phone’s microphone.
Note: Mute does not appear during a 111 call.
Transfer Audio to switch the call to an optional external device
(if applicable).
Speaker On or Speaker Off to activate or deactivate
speakerphone mode:
Speaker On to route the phone’s audio through the
speaker. (You can adjust the speaker volume using the
Side Volume key on the side of the phone.)
Speaker Off to use the phone’s earpiece.
Warning! Due to higher volume levels, do not place the phone near your
ear during speakerphone use.
Three-Way Call to call a third party.
Missed Alerts to display missed notifications.
Call History to access the Call History menu. (See “Call
History” on page 55.)
Contacts to access the Contacts menu. (See “Contacts” on
page 58.)
Messaging to access the Messaging menu. (See “Messaging”
on page 99.)
Call Memo Rec. to record the other party’s voice. (See
“Recording Call Memos” on page 84.)
Tools to access the Tools menu. (See “Using Your Phone’s
Tools” on page 73.)
Settings to access the Settings menu. (See “Your Phone’s
Settings” on page 32.)
During a call, use the Side Volume key or press the navigation
key up or down to adjust the receiver volume.
2. The Basics
21
End-of-Call Options
To display the following options, press Options (right softkey)
within ten seconds after disconnecting a call:
Call Again to dial the phone number.
Call:Speaker On to dial the phone number in speakerphone
mode.
Send Message to send a text message or a picture message.
Tip: You can also choose to send a message by pressing Send Msg (left
softkey).
Save Phone# to save the phone number in your Contacts.
Go to Phone Book to display the matching Contacts entry (if
applicable).
Note: The End-of-Call options are not displayed for calls identified as
Private.
Saving a Phone Number
Your phone can store up to 7 phone numbers in each of
500 Contact entries with up to 700 total numbers. Each entry’s
name can contain 32 characters. Your phone automatically sorts
the Contacts alphabetically. (For more information, see
“Contacts” on page 58.)
1. Enter a phone number and press Options (right softkey) >
Save Phone#.
2. Select New Name or From Ph. Book:
New Name to create a new Contacts entry for the
number.
From Ph. Book to save the number to an existing entry.
(This step is not necessary on the very first entry in your
Contacts.)
3. Select a label and press
.
4. Enter a name for the new entry using the keypad and press .
– or –
Search for an existing Contacts entry’s name and press to
save the new number.
5. Press Save (left softkey) > Done (left softkey).
22
2. The Basics
Finding a Phone Number
You can search Contacts entries for phone numbers that contain
a specific string of numbers.
1. Enter the last four or more digits of the number in standby
mode. (The more numbers you enter, the more specific the
search becomes.)
2. Press Options (right softkey) > Find. (The Contacts entry
matching the entered numbers will be displayed.)
3. Highlight your desired entry:
Press
Press
to display the entry details.
or
to dial.
Dialling and Saving Phone Numbers With
Pauses
You can dial or save phone numbers with pauses for use with
automated systems, such as voicemail or credit card billing
numbers.
There are two types of pauses available on your phone:
Hard Pause to send the next set of numbers when you press
2-Sec. Pause to automatically send the next set of numbers
after two seconds.
.
Note: You can have multiple pauses in a phone number and combine
two-second and hard pauses.
1. Enter the phone number and press Options (right softkey).
2. Select either Hard Pause or 2-Sec. Pause. (Hard pauses are
displayed as a “P” and two-second pauses as a “T.”)
3. Enter additional numbers.
4. To dial the number, press
or
. (When dialling a
number with a hard pause, press
to send the next set of
numbers.)
– or –
To save the number in your Contacts, press Options (right
softkey) > Save Phone#.
2. The Basics
23
Dialling From the Contacts List
1. From standby mode, press Contacts (right softkey).
2. Select the entry you want to call and press
.
3. Highlight the number you wish to call and press
or
.
Note: The icon next to each entry represents the labels (for example,
Mobile, Home, Work, etc.) of the entry’s default phone number. A triangle
next to the icon means there are other phone numbers for the entry.
Press the navigation key right or left to select other number.
Using Speed Dialling
With this feature, you can dial speed dial entries using one key
press for locations 2-9. (See “Assigning Speed Dial Numbers” on
page 62.)
From standby mode, press and hold the appropriate key for
approximately two seconds.
The display showing “Connecting...” confirms that the number
has been dialled.
Using Contacts Match
The Contacts Match feature allows you to retrieve any number
saved in your Contacts by entering only the last three to six
digits of the number. You need to activate this feature first to use
it. (See “Setting Contacts Match” on page 47.)
To place a call using the Contacts Match feature:
1. Enter the last three to six digits of a Contacts entry’s phone
number.
2. Press
or
. If there is more than one matched number
in your Contacts, the Contacts Match list is displayed.
3. Select the name you want to call from the list, and then press
or
to place a call.
24
2. The Basics
Making International Calls With Plus Code
Dialling
Your phone’s plus code dialling feature can automatically dial
the international access code when you are travelling outside of
New Zealand. (Not available in some areas.)
1. From standby mode, press and hold
appears on the phone display.
until a “+” sign
2. Enter the country code and phone number, and press
or
.
Note: To make an international call from inside New Zealand, please dial
00 then enter the country code and phone number.
Entering Text
Selecting a Character Input Mode
Your phone provides convenient ways to enter words, letters,
punctuation, and numbers whenever you are prompted to enter
text (for example, when adding a Contacts entry or when
sending text messages).
1. When you display a screen where you can enter text,
press Mode (right softkey).
2. Select a character input mode and press
:
Note: The menus displayed vary according to the entry field. If you see
triangles on the right of the menu, you can press the right and left
navigation keys to switch between related menus.
T9 Word to enter characters using T9 Text Input (see
page 26).
Alphabet to enter characters by using the keypad (see
page 28).
SYMBOL to enter symbols (see page 29).
SMILEYS to enter smiley pictures (see page 29).
Emoticons to enter emotion icons (see page 29).
Web Shortcuts to enter web shortcuts (for example,
www., http://, or, .com).
Pre-set Messages to enter preset messages (see page 29
and 42).
2. The Basics
25
Recent Messages to enter messages used recently.
Paste List to paste copied or cut text.
Fr. Schedule List to use words you added in your calendar
as Schedule (see page 66).
From To Do List to use words you added in your calendar as
To Do (see page 68).
NUMBER to enter numbers.
Signature to enter your signature (see page 43).
Erase All to erase all text.
Select Text to select stored text for copying or cutting.
Add Word to store words that you use frequently (see
page 27).
Text Options to display the Text Entry settings menu (see
page 46).
Tip: Before entering text, press
to change letter capitalisation style
: Abc > ABC > abc (Alphabet mode)
T9w > T9W > t9w (T9 Text Input mode).
Shift
Press and hold Mode (right softkey) to toggle between Alphabet
and T9 Text Input mode.
Setting the Default Input Mode
1. Select > Settings > Text Entry > Default Input.
2. Select an option and press :
T9 Word to set T9 word as the initial entry mode.
Alphabet to set alphabet as the initial entry mode.
Retain Mode to retain the previous entry mode.
Entering Characters Using T9 Text Input
T9 Text Input lets you enter text in your phone with just one key
press per letter. (To select the T9 Word mode when entering
text, see “Selecting a Character Input Mode” on page 25.)
T9 Text Input analyses the letters you enter using an intuitive
word database and creates a suitable word. (The word may
change as you type.) To accept a word and insert a space,
press
or .
Space
26
2. The Basics
Tip: In order to insert a space by pressing
, the Auto-Space setting
must be on (see page 46).
If you make a mistake, press
to erase a single character. Press
and hold
to delete an entire entry.
Adding a Word to the T9 Database
If a word you want to enter is not displayed as an option when
you are using T9 Text Input, you can add it to the database.
To add a word to theT9Text Input database:
1. Press Mode (right softkey) > Add Word.
– or –
From standby mode, select > Settings > Text Entry > Add Word.
2. Enter the word using Alphabet mode and press Save (left
softkey).
To edit or erase the words you have added:
1. Press Mode (right softkey) > Text Options > My Words.
– or –
From standby mode, select > Settings > Text Entry > My Words.
2. Highlight a word and press Options (right softkey).
3. Select an option and press
:
Edit to edit a word in My Words.
Erase to erase a word in My Words.
Customising the T9 Settings
1. Press Mode (right softkey) > Text Options > T9 Settings.
– or –
From standby mode, select > Settings > Text Entry >
T9 Settings.
2. Select an option and press
:
Next WordPrediction to automatically display the word
that may follow the current text input.
Word Completion to show the completed words that match
the keys you have entered without entering the whole
word.
2. The Basics
27
Word Scan to allow T9 Text Input to recognise words by
searching Contacts and messages.
Word Choice List to display the word choice list.
Show after enter to select when (after one to three digits)
to display the word choice list. The word choice list will
be displayed based on the number of digits you selected.
Show after wait to select how many seconds the phone
should wait to display the word choice list.
For more information about T9 Text Input, visit the Tegic Web
site at www.T9.com.
Entering Characters Using Alphabet Mode
To enter characters using Alphabet mode, select the Alphabet
mode (see “Selecting a Character Input Mode” on page 25).
Press the corresponding key repeatedly until the desired
character appears. By default, the first letter of an entry is
capitalised and the following letters are lowercased.
Characters scroll in the following order:
Key
English Sequence
Lower Case
Upper Case
.,@ 1 ? ! # /
abc2
ABC2
def3
DEF3
ghi4
GHI4
jkl5
JKL5
mno6
MNO6
pqrs7
PQRS7
tuv8
T UV 8
wxyz9
W XY Z 9
0
Space
One-character-shifted Caps Lock Unshifted
*
After a character is entered, the cursor automatically advances to
the next space after two seconds or when you enter a character
on a different key.
28
2. The Basics
Entering Symbols, Smileys, Emoticons, and
Preset Messages
Alternate text entry methods can help speed your messaging
and Web browsing. These methods, including SYMBOL,
SMILEYS, Emoticons, or Preset Messages are all accessed the
same way.
1. Select a text entry method (such as SYMBOL, SMILEYS,
Emoticons, or Pre-set Messages). (See “Selecting a Character
Input Mode” on page 25.)
2. Use your keypad or navigation key to select a desired text or
symbol and press .
2. The Basics
29
3. Menu Navigation
Viewing the Menus
Menu Diagram
The following list outlines your phone’s menu structure when in
List View. (See “Changing the Phone’s Menu Style” on page 36.)
1. Missed Alerts
2. Call History
1. Camera
1. Missed Calls
2. Camcorder
2. Incoming Calls
3. Picture Msg
3. Outgoing Calls
4. My Albums
4. Recent Calls
5. PictBridge
5. Erase Call History
6. Order Prints
3. Contacts
1. Find/Add Entry
7. Settings & Info
7. My Content
2. Speed Dial #’s
1. Application Mgr.
3. Groups
2. Games
4. My Name Card
3. Themes
5. Services
4. Ringers
4. Messaging
5. Screen Savers
1. Send Message
6. Applications
2. Text
7. Caller Tunes
3. Picture Msg
8. Dynamic 1-11 (If applicable)
4. Premium Msgs
5. Go to Email
6. Chat
9. Others (If applicable)
8. Music
9. Media Player
7. Voicemail
1. Channel Listing
8. Settings
2. Media Listing
5. Voice Memo
1. Record
2. List
3. Screen Call
30
6. Pictures
3. Menu Navigation
3. Playlist
0. Web
*. Tools
1. Bluetooth
2. Calendar
3. Alarm Clock
4. File Manager
5. Assigned Media
6. More Tools
#. Settings
1. Display
2. Sounds
3. Bluetooth
4. Messaging
5. Text Entry
6. Phone Info
7. More..
IN USE MENU
Press Options (right softkey) to display the following options:
1. Flash
2. Mute/Unmute
3. Speaker On/Speaker Off
4. Three-Way Call
5. Missed Alerts
6. Call History
7. Contacts
8. Messaging
9. Call Memo Rec.
10. Tools
11. Settings
3. Menu Navigation
31
4. Your Phone’s Settings
Sound Settings
Ringer Types
Selecting Ringers for Incoming Calls
Your phone provides a variety of ringer options that allow you to
customise your ring setting. These options allow you to identify
incoming calls by the ring.
1. Select
> Settings > Sounds > Ringer Type > Incoming Calls.
2. Select With Caller ID or Without Caller ID.
3. Select Single Tones, Ring Tones, Melodies, Ringer & Voice,
My Content (for ringer), -Get New, My Content (for video),
My Albums, or Assigned Media.
4. Select an available ringer and press
.
Selecting a Ringer for Alarms or Scheduled Events
1. Select
> Settings > Sounds > Ringer Type > Alarm or Schedule.
2. Select > Single Tones, Ring Tones, Melodies, Voice Alarm,
My Content, or -Get New.
3. Select an available ringer and press
.
Selecting Ringers for Messages
1. Select
> Settings > Sounds > Ringer Type > Messaging.
2. Select Text Message, Picture Msg or Voicemail.
3. Select Single Tones, Ring Tones, Melodies, Voice Ringer,
My Content, or -Get New.
4. Select an available ringer and press
.
Setting a Power On/Power Off Tone
1. Select
> Settings > Sounds > Ringer Type.
2. Select Power On or Power Off.
3. Select
> Tones, Off, My Content, or -Get New.
4. Select an available tone and press
32
4. Your Phone’s Settings
.
Adjusting the Phone’s Volume Settings
Adjusting the Ringer Volume
1. Select
> Settings > Sounds > Volume > Ringer.
2. Select a volume level, 1 Beep, Ringer Off, Vibrate All, or
Silence All and press Done (left softkey).
Tip: You can make the phone vibrate at any volume level by checking the
box next to Always Vibrate.
You can choose a volume level, 1 Beep, Ringer Off, Vibrate All, or
Silence All from standby mode (or the earpiece volume during a
call) by using the Side Volume key.
Adjusting the Alert Volume
This setting controls the alert volume for alarms, text messages,
picture messages, or voicemails. You can set the alert volume
separately from the ringer volume setting.
1. Select
> Settings > Sounds > Volume > Advanced....
2. Select Alarms, Text Message, Picture Msg, or Voicemail.
3. Using the navigation key, select Separate Vol.
4. Select a volume level, and press Done (left softkey).
Adjusting the Earpiece or Speakerphone Volume
1. Select
> Settings > Sounds > Volume.
2. Select either Earpiece or Speakerphone.
3. Select a volume level, and press Done (left softkey).
Adjusting the Headset,Applications, or
Start-up/Pw-off Volume
1. Select
> Settings > Sounds > Volume.
2. Select Headset, Applications, or Start-up/Pw-off.
3. Select a volume level, and press Done (left softkey).
4. Your Phone’s Settings
33
Selecting Vibrate Types
With this feature, you can select vibrate types for incoming calls,
messages, alarms, and scheduled events.
1. Select
> Settings > Sounds > Vibrate Type.
2. Select Incoming Calls, Messaging, Alarm, or Schedule. The
following items require an additional step:
Incoming Calls: select With Caller ID or Without Caller ID.
Messaging: select Text Message, Picture Msg, or Voicemail.
3. Select a vibrate type and press
.
Setting Keytones
1. Select
> Settings > Sounds > Keytones.
2. Select an option and press
:
Tone Length to select Short or Long.
Tone Volume to select a key press tone volume.
Tone Type to select a key press tone type.
Setting Up Voice Guide
Voice Guide activates both voice prompt and key press echo
functions. With this feature on, you can hear voice prompts
when using voice-activated dialling, Voice Memo, Screen Call,
etc. and hear a voice say the numbers that you press on the
keypad.
Note: The default setting is Off.
When the ringer volume is set to Silence All or Vibrate All, voice
prompts cannot be heard.
The key press echo function is available when you are in standby
mode.
1. Select
> Settings > Sounds > Voice Guide.
2. Select On or Off.
34
4. Your Phone’s Settings
Alert Notification
Your phone can alert you with an audible tone when you change
service areas, when there are incoming calls or messages, or
when your network signal is fading. Your phone can also alert
you once a minute during a call, or when a call has been
connected.
To set alerts:
1. Select
> Settings > Sounds > Alerts.
2. Select an option and press
:
Beep Each Minute to set a minute reminder that beeps ten
seconds before the end of each minute during a call.
Out of Service to set an alert to notify you of network
services parameter changes.
Connect to set an alert to notify you when your call has
been connected.
Signal Fade/Call Drop to set an alert to notify you when
your phone loses a signal during a call.
Messaging to set an alert to notify you of text messages,
picture messages, or voicemails.
Repeat to select a repeating status of the alarm (Once,
Repeat Alert or Off).
Ringer Length to set the duration for the alarm to ring.
Tip: You can also set the Messaging alert by selecting > Settings >
Messaging > Message Reminder > Text Message, Picture Msg, or
Voicemail.
3. Select a setting and press
.
Silence All
With the phone open, press and hold the Side Volume key
down in standby mode. (The screen will display “Silence All.”)
To deactivate, with the phone open, press the Side
Volume key up repeatedly to select a volume level.
Tip: You can also select Vibrate All to set your phone to vibrate only.
4. Your Phone’s Settings
35
Display Settings
Changing the Phone’s Menu Style
Your phone allows you to choose how the main menu appears
on your display screen.
1. Select
> Options (right softkey) > Change View.
2. Select Grid View or List View:
Grid View to view each main menu item as an animated
single-screen icon. You can select a menu by pressing a
number key. Allocation of menu options corresponds to
that of number keys on the keypad.
List View to view main menu as a list. Menu option is
numbered and you can select it by pressing the
corresponding number key on the key pad.
Changing the Greeting
1. Select
> Settings > Display > Main Screen.
2. Select Foregrounds > Greeting > Custom.
3. Enter a custom greeting using your keypad and press
(See “Entering Text” on page 25.)
.
Changing the Backlight Time Length
To change the Backlight setting:
1. Select
> Settings > Display > Main Screen or Outer Screen.
2. Select Backlight.
3. Select Dim Only, Always On, or a preset length of time.
Note: The Always On setting returns to the previous value the next time
you turn on the phone.
To change the Keypad Light setting:
1. Select
> Settings > Display > Keypad Light.
2. Select Always Off or a preset length of time.
Note: Long backlight settings affect the phone’s talk and standby times.
36
4. Your Phone’s Settings
Power Save Mode
This feature helps conserve your battery power by setting the
Main Screen and Outer Screen backlights to Dim Only, the Main
Screen sleep mode to after 30sec., and the Outer Screen sleep
mode to after 5sec.
1. Select
> Settings > Display > Power Save Mode.
2. A message appears. Press OK (left softkey) to continue.
3. Select On. (Select Off to deactivate this feature.)
Changing the Background
1. Select
> Settings > Display.
2. Select Main Screen or Outer Screen.
3. Select Background.
Tip: Depending on your assigned theme, you may also be able to change
>
the Main Screen background from standby mode by selecting
Options (right softkey) > Background.
4. Select a background and press
.
Changing the Contrast
This feature allows you to change the light level on the Main
Screen.
1. Select
> Settings > Display > Contrast.
2. Select Highest, High, Medium, Low, or Lowest.
Changing the Display Screen Animation
1. Select
> Settings > Display > Main Screen > Animations.
2. Select Outgoing Calls or Service Search > Set.
3. Select an option (Preset, My Content, -Get New, My Albums,
Assigned Media, or Off) and press .
4. Select an animation display and press
.
4. Your Phone’s Settings
37
Changing the Display for Incoming Calls
1. Select
> Settings > Display > Main Screen > Incoming Calls.
2. Select an option (Preset, My Content, -Get New, My Albums,
Assigned Media, or Off) and press .
3. Select a colour or an image and press
twice.
Changing the Screen Saver
Your phone offers you the option of displaying a screen saver
while in standby mode.
1. Select
> Settings > Display.
2. Select Main Screen or Outer Screen.
3. Select Screensaver.
4. Select an option (Preset, My Content, -Get New, My Albums,
Assigned Media, or Off) and press .
5. Select a screen saver and press
twice.
Changing the Clock/Calendar Display for
Standby Mode
Select from among a variety of items to be displayed in standby
mode.
1. Select
> Settings > Display.
2. Select Main Screen or Outer Screen.
3. Select Foregrounds > Clock/Calendar.
4. Select a display option and press
twice.
Tip: You can change the Clock/Calendar position on the Main Screen by
pressing Positioning (right softkey), if you select Large Digital,
Small Digital, Small Analog, 1 Mon. Small, or 2 Mon. Calendar.
38
4. Your Phone’s Settings
Customising the User Interface
Your phone lets you customise the user interface (UI) of the
standby screen, Main menu and My Favourites settings with your
choice of downloaded themes to reflect your personality. You
can download the latest themes directly into your phone from
the corresponding URL.
1. Select
> Settings > Display > Main Screen > Themes.
2. Select SANYO or available downloaded themes.
SANYO displays the preset standard clock display
selected in the Clock/Calendar menu. (See “Changing
the Clock/Calendar Display for Standby Mode” on
page 38.)
Note: See “Downloading Through the Web Wirelessly” on page 79.
Changing the Text Font Size
This setting allows you to adjust the Main Screen font size to
view a message and browse on the Web as well as the Outer
Screen font size to view a name and phone number.
1. Select
– or –
Select
> Settings > Display > Font Size.
> Settings > More... > Accessibility > Font Size.
2. Select an option and press
:
Main Screen to select Messaging or Browser.
Outer Screen to select Name/Phone#s.
3. Select a font size and press
.
Tip: From the font preview display, select a font size by pressing the
navigation key right or left.
4. Your Phone’s Settings
39
Changing the Input Font Size
1. Select
– or –
Select
> Settings > Display > Main Screen > Input Font.
> Settings > More... > Accessibility > Input Font.
2. Select Phone#s, Messaging, or Others.
3. Select an input font size and press
.
Setting Return to Standby Mode
1. Select
> Settings > Display > Return to Idle.
2. A message appears. Press OK (left softkey) to continue.
3. Select Automatically or End Key:
Automatically to return to standby mode automatically
when no key is pressed in 30 seconds.
End Key to return to standby mode by pressing
.
Note: The End Key setting affects the phone’s talk and standby times.
Sleep Mode
This feature helps conserve your battery power by restricting
the display.
1. Select
> Settings > Display.
2. Select Main Screen or Outer Screen.
3. Select Sleep Mode.
4. Select a time interval before the phone goes into sleep mode
and press . (Select Off to deactivate this feature.)
40
4. Your Phone’s Settings
Location Settings
Your phone is equipped with a Location feature for use in
connection with location-based services that may be available in
the future.
Note: The Location feature is currently not available.
The Location feature allows the network to detect your position.
Turning Location off will hide your location from everyone
except emergency numbers e.g. 111.
Note: Even if the Location feature is enabled, no service may use your
location without your express permission.
To enable your phone’s Location feature:
1. Select > Settings > More... > Location.
(The Location disclaimer is displayed.)
2. Read the disclaimer and press OK (left softkey).
3. Select On or Off.
When the Location feature is on, your phone’s standby screen
will display the
icon. When Location is turned off, the
icon will be displayed.
4. Your Phone’s Settings
41
Messaging Settings
Setting Message Notification Display
You can set your phone to display an icon and message
notification or just display an icon notification when you receive
a text message, picture message or voicemail.
1. Select
> Settings > Messaging > Notification.
2. Select Msgs and Icon or Icon Only.
Tip: To access Messaging settings menu, you can also select
Messaging > Settings.
>
Editing Preset Messages
Your phone can store preset messages for use with text
messaging. You can edit your phone’s default preset messages
through the Settings menu.
1. Select > Settings > Messaging > Pre-set Messages. (The list of
preset messages is displayed.)
2. Select the message you want to edit and press
.
3. Use your keypad to edit the message and press OK (left
softkey) or to save your changes.
Note: To reset all messages, press Options (right softkey) >
Reset All Msgs > Yes during step 2 above.
For information on editing text, see “Entering Text” on page 25.
Erasing Preset Messages
1. Select
> Settings > Messaging > Pre-set Messages.
2. Select the message you want to erase and press Options (right
softkey).
3. Select Erase > Yes.
42
4. Your Phone’s Settings
Setting Your Callback Number
With this feature, you can send a callback number with your text
message.
1. Select
2. Press
> Settings > Messaging > Callback Number.
, and then select an option and press
:
None to send no callback number.
My Phone# to send your phone number.
Other to send a defined number. To set a number, enter a
phone number and press .
3. Press Done (left softkey).
Setting Your Signature
This feature allows you to send a text message with your
signature.
1. Select
2. Press
> Settings > Messaging > Signature.
, and then select On.
3. Enter your signature in the Text field. (See “Entering Text” on
page 25.)
4. Press OK (left softkey) > Save (left softkey).
Note: You can insert your signature even when your signature setting is
off. Press Mode (right softkey) and select Signature while composing
your message.
Setting Drafts Alert
This feature sends you a reminder when you have unsent
messages waiting in the drafts folder.
1. Select
> Settings > Messaging > Drafts Alert.
2. Select On.
4. Your Phone’s Settings
43
Airplane Mode
When your phone is in Airplane mode, it cannot send or receive
any calls (except for 111 dialling, when within the home
network) or access online information. You may still use the
phone’s other features, such as voice memo, calculator, calendar,
etc., while you are in Airplane mode.
1. Select
> Settings > More... > Airplane Mode.
2. Read the disclaimer and press
or OK (left softkey).
3. Select On or Off.
Note: While in Airplane mode, your phone’s screen will display “Phone Off.”
TTY Use
A TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are deaf or
hard of hearing, or who have speech or language disabilities, to
communicate by telephone.
Your phone is compatible with TTY devices using 45.45 Baud
rate. Please check with the manufacturer of your TTY device to
ensure that it supports digital wireless transmission and 45.45
Baud rate. Your phone and TTY device will connect via a special
cable that plugs into your phone’s headset jack. If this cable was
not provided with your TTY device, contact your TTY device
manufacturer to purchase the connector cable.
1. Select > Settings > More... > Accessibility > TTY. (An
informational message will be displayed.)
2. Press
or OK (left softkey) to continue.
3. Select On or Off.
Note: When you connect TTY devices, your phone will display
in
TTY mode.
If TTY mode is enabled, the audio quality of non-TTY devices
connected to the headset jack may be impaired.
IMPORTANT NOTICE: 111 Emergency Calling
It is recommended that TTY users make emergency calls by other means
including mobile and landline communications.
44
4. Your Phone’s Settings
Phone Setup Options
My Favourites
Your phone offers you the option of assigning a shortcut to a
favourite or often-used function. Pressing Favourites (left
softkey) will launch your user-defined shortcut.
To assign a shortcut:
1. Press Favourites (left softkey).
2. Select <AddFavourite>.
3. Select an option and press
:
Contact to display stored Contacts entries.
My Content to display downloaded items stored in your
phone.
My Album to display thumbnail images stored in your In
Phone folder.
Web Bookmark to display your bookmarked sites.
Menu Item to assign an often-used menu item.
4. Using the navigation key or your keypad, select an item to be
assigned to the My Favourites list.
5. Press Assign (left softkey) to save if you select options other
than Contact.
To edit a shortcut:
1. Press Favourites (left softkey).
2. Highlight your desired menu and press Options (right softkey).
3. Select an option and press
:
Replace to replace an existing shortcut.
Remove to remove an existing shortcut.
Remove All to remove all the existing shortcuts.
Help to display the My Favourites list information.
4. Your Phone’s Settings
45
Setting Text Entry Options
1. Select
> Settings > Text Entry.
2. Select an option and press
:
Auto-Capital to set the auto-capitalisation to On or Off.
Auto-Space to set the auto-spacing to On or Off after T9
words you enter.
My Words to add a word to or edit a word in the T9
database (see page 27).
T9 Settings to customise the T9 settings (see page 27).
Default Input to select T9 word, Alphabet, or Retain Mode for
the initial entry mode. Select Retain Mode to retain the
previous entry mode (see page 26).
Add Word to store words that you use frequently
(see page 27).
Auto-Complete to automatically display words that may
follow the current text input.
Help to see the T9 instructions page.
Setting Call Answer
This feature allows you to answer incoming calls by pressing
,
, softkeys, and sidekeys), or
, any key (except
opening your phone.
1. Select
> Settings > More... > Call Setup > Call Answer.
2. Select Talk Key, Any Key, or Flip Open.
Auto Answer Mode
This feature sets the phone to automatically pick up incoming
calls in speakerphone mode or hands-free mode when
connected to an optional hands-free device.
1. Select
> Settings > More... > Call Setup > Auto-Answer.
2. Select Hands-free or Speakerphone.
3. Select 5 Seconds, 15 Seconds, or Off.
46
4. Your Phone’s Settings
Setting Contacts Match
To activate the Contacts Match feature:
1. Select
> Settings > More... > Call Setup.
2. Select Contacts Match > On.
To deactivate this feature, select Off.
Tip: To place a call using the Contacts Match feature, see “Using
Contacts Match” on page 24.
Note: This setting does not apply to 111 or directory assistance.
Headset Mode
This feature allows you hands-free phone use. Press the Turbo
Button (the operation button) on an optional headset to activate
useful functions.
To connect the headset:
Simply plug the headset into your phone’s headset jack.
To set the headset mode:
1. Select
> Settings > More... > Headset Mode.
2. Select Turbo Button.
3. Select On or Off.
Tip: Press the turbo button on the headset twice to redial the last
outgoing call. Also, press and hold the same button to record a voice
memo.
To set the ringer sound:
1. Select
> Settings > More... > Headset Mode.
2. Select Ringer Sound.
3. Select Normal or Headset Only.
4. Your Phone’s Settings
47
Setting Power On to Alert
Power On to Alert helps prevent unintentional or accidental
power-on of your phone’s alarm settings while your phone is
turned off. This feature applies only to Event Alerts, Call Alarm,
and Alarm Clock. (The default setting is Off.)
1. Select
> Settings > More... > Power On to Alert.
2. Select On or Off:
On to activate alarm in Airplane Mode even if the phone is
turned off.
Off to deactivate all alarm settings while the phone is
turned off.
Setting Navigation Key Shortcuts
You can use the navigation keys as shortcuts to access specific
menu items directly from standby mode. With this feature, you
can reassign the default shortcuts to the menu items you choose.
1. Select
> Settings > More... > Navigation Keys.
2. Select the navigation key you wish to reassign and press
.
3. Using the navigation key or your keypad, select a function.
4. Press Assign (left softkey) to save.
Note: These shortcuts are available only when the display theme is set
to SANYO (see “Customising the User Interface” on page 39).
Setting the Side Key Guard
This feature enables you to lock the side keys while your phone
is closed.
1. Select
> Settings > More... > Side Key Guard.
2. Select On or Off.
Note: This feature does not apply when the phone is open.
Tip: You can deactivate this feature temporarily by pressing and holding
the Side Volume key while the phone is closed. This feature will be
reactivated if the phone is left unoperated for approximately 30 seconds
or when the phone is opened and closed again.
48
4. Your Phone’s Settings
5. Security
Accessing the Security Menu
All of your phone’s security settings are available through the
Security menu. You must enter your lock code to view the
Security menu.
1. Select
> Settings > More... > Security.
2. Enter your lock code.
Tip: If you never changed the lock code number and you cannot recall
your lock code, try using the last four digits of your phone number.
Using Your Phone’s Lock Features
Locking Your Phone
When your phone is locked, you can only make calls to 111,
Customer Service, and to special numbers without entering the
lock code.
1. From the Security menu display, select Lock My Phone.
2. Select Lock Now or On Power-up:
Lock Now to lock your phone now.
On Power-up to lock your phone the next time it is
turned on.
3. Select either Full Lock or Exp. IncomingCalls:
Full Lock to restrict both outgoing and incoming calls.
Exp. IncomingCalls to restrict outgoing calls while
allowing incoming calls.
Unlocking Your Phone
1. From standby mode, press Unlock (left softkey).
2. Enter your lock code.
Changing the Lock Code
1. From the Security menu display, select Change LockCode.
2. Enter and re-enter a new lock code.
5. Security
49
Calling in Lock Mode
You can place calls to 111, Customer Service, and to your special
numbers even if your phone is locked. (See “Locking Your
Phone” on page 49.)
Note: You can call only an emergency number while Voice is set to
Locked in Restrict and Lock.
To call an emergency number, special number, or Customer
Service, enter the phone number and press
. (For
information on special numbers, see “Using Special
Numbers” on page 51.)
Locking the Camera/Pictures Menus
1. Select
> Settings > More... > Restrict and Lock.
2. Select Camera/Pictures, and then enter your lock code.
3. Select an option and press
:
Unlocked to deactivate the current Camera/Pictures
feature.
Lock Camera to lock activating the camera/camcorder.
Lock My Pictures to lock opening files in My Albums.
Lock All to lock activating the camera/camcorder and
accessing to Pictures menus.
Locking Voice Calls
With this feature, you can restrict incoming and outgoing voice
calls.
1. Select
> Settings > More... > Restrict and Lock.
2. Select Voice, and then enter your lock code.
3. Select Lock > Locked. (Select Unlocked to deactivate this
feature.)
50
5. Security
Restricting Calls
You can restrict phone numbers your phone dials or receives.
(This setting does not apply to 111 or Customer Service.)
1. Select
> Settings > More... > Restrict and Lock.
2. Select Voice, and then enter your lock code.
3. Select Restrict > Incoming Calls or Outgoing Calls.
4. Select an option and press
:
Allow All to make or receive all calls.
Phone Book Only to make or receive calls to or from
Contacts entries, voicemail, or special numbers only.
Special #s Only to make or receive calls to or from three
special numbers only. (You must register the numbers
beforehand. See “Using Special Numbers” below.)
Note: Restricted incoming calls are forwarded to voicemail.
Using Special Numbers
You can save up to three special numbers on your phone. You
can make or receive calls to or from special numbers even when
your phone is locked.
To add or edit a special number:
1. From the Security menu display, select Special Numbers.
2. Select a field to enter or edit the number.
3. Enter or edit the number and press
> Done (left softkey).
Note: There are no speed dial options associated with special numbers.
You cannot make calls to or receive calls from special numbers if
Voice is set to Locked in Restrict and Lock.
5. Security
51
Erasing the Phone Content
1. From the Security menu display, select Erase/Reset.
2. Select an option and press
:
Erase Web Cookies to erase all web cookies saved in the
phone.
Erase Web History to erase all web histories saved in the
phone.
Erase Web Cache to erase all web cache memories saved
in the phone.
Erase PhoneBook to erase all of your Contacts entries.
Erase Voice Tags to erase all voice dial tags you have
recorded.
Erase My Content to erase all items you have downloaded
to your phone.
Erase Pictures to erase all pictures and videos saved in the
phone.
Erase Voice Data to erase all voice/call memos you have
recorded.
Erase Message to erase all text messages (including
locked ones) in the Inbox, Sent Mail, Pending, Drafts
folders, and your defined folders; all Recent Lists; and all
user-created preset messages.
Erase Cal. Events to erase all scheduled events (including
secret ones).
3. If you are certain you would like to erase, press OK (left
softkey) > Yes.
Resetting the Browser
1. From the Security menu display, select Erase/Reset >
Reset Browser.
2. If you are certain you would like to reset, press OK (left
softkey) > Yes.
52
5. Security
Resetting My Favourites
1. From the Security menu display, select Erase/Reset >
Reset Favourites.
2. If you are certain you would like to reset, press OK (left
softkey) > Yes.
Resetting Your Picture Message Account
This option resets your authentication ID for your Picture
Message account.
1. From the Security menu display, select Erase/Reset >
Reset Picture Msg.
2. If you are certain you would like to reset your Picture Message
account, press OK (left softkey) > Yes.
Restoring Default Settings
The Reset All Settings function restores all the factory defaults,
including the ringer types and display settings. The Contacts,
Call History, Calendar, and Messaging are not affected.
1. From the Security menu display, select Erase/Reset >
Reset All Settings.
2. If you are certain you would like to restore all the factory
settings, press OK (left softkey) > Yes.
Resetting Your Phone
The Reset Phone function resets all settings and erases all data
on your phone (except data saved in the microSD card).
1. From the Security menu display, select Erase/Reset >
Reset Phone.
2. If you are certain you would like to erase all the data and reset
your settings, press OK (left softkey) > Yes.
5. Security
53
Lost or Stolen Phones
To report your phone missing, call Telecom Customer Services
at 0800 800 163. They will be able to put a bar on your phone to
disable it from being used. You will be asked to load a password
that will need to be repeated if you find or recover your phone.
It is important that you keep this password confidential.
To minimise the inconvenience of losing your Contacts details,
please keep a separate record of the information.
Security Features for Internet
Enabling and Disabling Internet Services
You can disable Internet services without turning off your
phone; you will not have access to all Internet services,
including Web and email. Disabling Internet will avoid any
charges associated with Internet services. While signed out, you
can still place or receive phone calls, check voicemail, and use
other voice services. You may enable Internet services again at
any time.
To disable Internet services:
1. Select > Settings > More... > Internet > Disable.
(A message will appear.)
2. Press Disable (right softkey) to confirm that you want to sign
out.
To enable Internet services:
1. Select > Settings > More... > Internet > Enable.
(A message will appear.)
2. Press OK (left softkey) to sign in.
Locking Internet Services
You can lock access to internet services.
1. Select
> Settings > More... > Restrict and Lock.
2. Select Internet > Off and Lock, and then enter your lock code.
3. Select Locked. (Select Unlocked to deactivate this feature.)
54
5. Security
6. Call History
Viewing History
You will find the Call History feature very helpful. It is a list of
the phone numbers (or Contacts entries) for calls you placed,
accepted, or missed. Call History makes redialling a number fast
and easy. It is continually updated as new numbers are added to
the top of the list and the oldest entries are removed from the
bottom of the list.
1. Select
> Call History.
2. Select Missed Calls, Incoming Calls, Outgoing Calls, or
Recent Calls.
3. Select the entry you wish to view and press
.
Note: Call History records only calls that occur while the phone is turned
on. If a call is received while your phone is turned off, it will not be
included in the phone’s incoming or missed call logs. Also, the phone
numbers from calls identified as Private will not be recorded.
Tip: The icons next to the name in the Recent Calls list represent the
status of the call history:
for outgoing calls,
for incoming calls, and
for missed calls.
You can also view the next or previous Call History entry by pressing
the navigation key right or left.
Call History Options
For additional information about and options for a particular
call, highlight a Call History entry and press Options (right
softkey):
Call to dial the phone number.
Call:Speaker On to dial the phone number in speakerphone
mode.
Send Message to send a text message (see page 100) or a
picture message (see page 116).
Save Phone# to save the phone number (if applicable). (See
“Saving a Phone Number From Call History” on page 56.)
Go to Phone Book to display the matching Contacts entry (if
applicable).
6. Call History
55
Prepend to add numbers to the beginning of the phone
number. (See “Prepending a Phone Number From Call
History” on page 57.)
Erase to erase the entry.
Making a Call From Call History
1. Select
> Call History.
2. Select Missed Calls, Incoming Calls, Outgoing Calls, or
Recent Calls.
3. Highlight the Call History entry you want to call.
4. Press
or
.
Saving a Phone Number From Call History
1. Select
> Call History.
2. Select Missed Calls, Incoming Calls, Outgoing Calls, or
Recent Calls.
3. Highlight the Call History entry you want to save and press
Options (right softkey) > Save Phone#.
4. Select New Name or From Ph. Book to enter a name:
New Name to create a new Contacts entry for the
number.
From Ph. Book to save the number to an existing entry.
(This step is not necessary on the very first entry in your
Contacts.)
5. Select a label and press
.
6. Enter a name for the new entry using the keypad and press .
– or –
Search for an existing contact name and press to save the
new number.
7. Press Save (left softkey).
Note: You cannot save phone numbers from calls identified as Private.
56
6. Call History
Prepending a Phone Number From Call
History
If you need to make a call from Call History and you happen to
be outside your local area code, you can add the appropriate
prefix by prepending the number.
1. Highlight a Call History entry and press Options (right
softkey).
2. Select Prepend.
3. Enter the digits you want to add to the number.
4. Press
or
to place a call.
Erasing Call History
1. Select
> Call History > Erase Call History.
2. Select Missed Calls, Incoming Calls, Outgoing Calls, Recent Calls,
or All.
3. Select Yes.
6. Call History
57
7. Contacts
Displaying the Contacts List
From standby mode, press Contacts (right softkey).
Adding a New Contacts Entry
Your phone can store up to 500 Contacts entries. Contacts can
store up to a total of 700 phone numbers and each entry’s name
can contain 32 characters.
1. From the Contacts list display, select <Add Contact>.
2. Enter a name for the entry and press the navigation key down.
Shortcut: Enter the phone number in standby mode and press
.
Proceed with steps 2-5 in “Saving a Phone Number”on page 22.
3. Enter the phone number and press
.
4. Select a label for the entry (Mobile, Home, Work, Pager, Fax, or
Other) and press .
5. Press Save (left softkey).
Assigning a Group Entry
To assign a Contacts entry to a group:
1. Select
> Contacts > Groups.
2. Select an available group entry location and press Options
(right softkey) > Add Members.
3. Select a Contacts entry and press
.
4. Press Add (left softkey).
To edit a group entry:
1. Select
> Contacts > Groups.
2. Select the group entry you want to edit and press Options
(right softkey) > Edit.
3. Select the field you want to edit (Name, Ringer, or Picture ID)
and press .
4. Edit the field and press
5. Press Save (left softkey).
58
7. Contacts
.
To erase a group member:
1. Select
> Contacts > Groups.
2. Select the group entry you want to erase members from and
press .
3. Select the member you want to erase and press Options (right
softkey) > Erase > This or All.
4. Select Yes.
Finding Contacts Entries
There are several ways to display your Contacts entries:
by name, by speed dial number, by group, and by voice dial tags.
Follow the steps outlined in the sections below to display
entries from the Contacts menu.
Finding Names
To find Contacts entries by name:
1. From the Contacts list display, scroll through all the entries
using your navigation key.
– or –
Enter the first letter or part of the person’s name. (The more
letters you enter, the more your search narrows.)
2. To display the entry’s details, select your desired entry and
press .
To find Contacts entries by voice dial tag:
Note: To use this feature, you must have stored entries for voice dialling.
See “Using Voice-Activated Dialling” on page 82.
1. Press and hold
or
with the phone open.
– or –
Press and hold the Side Volume key with the phone closed.
2. Say the voice dial tag of the Contacts entry you would like to
find. If the phone partly recognises the name, a list of up to
three most likely matched names is displayed. You will hear
the voice prompt “Did you say…” followed by the matched
name.
7. Contacts
59
Note: Your phone will automatically place a call if the voice dial tag is
completely recognised.
3. Say “Yes” to confirm the name, or “No” to change the
selection.
Finding Speed Dial Numbers
Select > Contacts > Speed Dial #’s.
See “Using Speed Dialling” on page 24 for how to use speed
dialling.
Finding Group Entries
To find entries designated as part of a group:
1. Select
> Contacts > Groups.
2. Scroll through the group entries using your navigation key. To
display Contacts entries belonging to a group, select the
group and press .
3. To dial the entry’s default phone number, select the entry and
press
.
Contacts Entry Options
To access a Contacts entry’s options, select an entry and press
. Then highlight a phone number and press Options (right
softkey):
60
Edit to edit the selected entry.
Call to dial the selected phone number.
Call:Speaker On to dial the selected phone number in
speakerphone mode.
Send Message to send a text message (see page 100) or a
picture message (see page 116).
Call Alarm to set a call alarm to the entry (see page 67).
Set Speed Dial to assign speed dial numbers to the entry (see
page 62).
Set Voice Tag to set a voice dial tag for the entry (see page 82).
7. Contacts
Prepend to alter a phone number by adding numbers to the
beginning of the entry. (See “Prepending a Phone Number
From Call History” on page 57.)
Send Contact to send the Contacts entry via Bluetooth (see
page 136).
Print to print the Contacts entry’s data by using Bluetooth.
Tip: You can view the next or previous entry by pressing the navigation
key right or left.
Adding a Phone Number to a Contacts
Entry
1. From the Contacts list display, select the Contacts entry you
wish to add a phone number to and press .
2. Press Options (right softkey) > Edit.
3. Select the box next to the
4. Enter the number and press
icon and press
.
.
5. Select a label for the number and press
.
6. Press Save (left softkey).
Editing a Contacts Entry’s Phone Number
1. From the Contacts list display, select the Contacts entry you
wish to edit the phone number and press .
2. Highlight the number you wish to edit and press Options (right
softkey) > Edit.
3. Press
again to edit the number.
4. Press
to clear one digit at a time, or press and hold
erase the entire number.
5. Re-enter or edit the number and press
6. Select a label for the number and press
to
.
.
7. Press Save (left softkey).
7. Contacts
61
Erasing a Contacts Entry From the List
1. From the Contacts list display, highlight the entry you wish to
delete and press Options (right softkey).
2. Select Erase Contact > Yes.
Assigning Speed Dial Numbers
With this feature, you can dial Contacts directory entries with one
key press for locations 2-9. (For details on how to make calls
using speed dial numbers, see “Using Speed Dialling” on
page 24.)
1. Select
> Contacts > Speed Dial #’s.
2. Select an available speed dial location and press
3. Select an entry from the list and press
.
.
4. Select the phone number you want to set as a speed dial
number and press .
– or –
1. From the Contacts list display, select an entry and press
.
2. Highlight the phone number you want to set as a speed dial
number and press Options (right softkey) > Set Speed Dial.
3. Select an available speed dial location and press
.
Note: If you attempt to assign an already in-use speed dial location to a
new phone number, you will be asked whether you want to overwrite the
assigned number. Select Yes to overwrite or No to cancel. To delete the
previous speed dial assignment, select Reset.
Editing a Contacts Entry
1. From the Contacts list display, select the entry you wish to
edit and press .
2. Press Options (right softkey) > Edit.
3. Select the field you want to edit and press
4. Add or edit the information and press
5. Press Save (left softkey).
62
7. Contacts
.
.
Assigning an Image to a Contacts Entry
You can assign an image to a Contacts entry. The image is
displayed when the entry calls you.
1. From the Contacts list display, select the entry for which you
want to assign the image and press .
2. Press the navigation key up to highlight the
twice.
icon and press
3. Select an image and press to preview, and press
assign the image to the entry.
again to
4. Press Save (left softkey).
Selecting a Ringer for an Entry
You can assign a ringer to a Contacts entry so you can identify
the caller by the ringer.
1. From the Contacts list display, select the entry for which you
want to assign a ringer and press .
2. Press Options (right softkey) > Edit.
3. Scroll down to the box next to the
4. Select a ringer and press
play automatically.)
icon and press
.
. (As you highlight a ringer, it will
5. Press Save (left softkey).
7. Contacts
63
Secret Contacts Entries
You can hide an entry’s phone number(s) and require your lock
code to edit the entry by making it secret. The entry name is still
displayed, but the entry’s information is replaced with <Secret>.
1. From the Contacts list display, select the Contacts entry you
want to tag as secret and press Options (right softkey).
2. Select Set Secret.
3. Enter the four-digit lock code.
4. Select On or Off.
Tip: If you never changed the lock code number and you cannot recall
your lock code, try using the last four digits of your phone number.
Dialling Services
Your Contacts is preprogrammed with contact numbers for
various services.
1. Select
> Contacts > Services.
2. Select Customer Service, Dir Assistance, or Account Info.
3. Press
64
or
7. Contacts
.
8. Personal Organiser
Using Your Phone’s Calendar
Use the Calendar to remind you of events or important calls you
need to make. You can schedule up to 100 schedules, 15 call
alarms and 40 To Do items.
Displaying Your Calendar
Select
> Tools > Calendar.
Note: To display your calendar in a no-service area, set the actual time
and date, and then press OK (left softkey) in the “Set Current Time/Date”
screen.
Tip: To change the calendar display views, press the left softkey
(Monthly or Weekly). In the weekly view, you can easily add to or edit
your own schedule.
Changing the Calendar Settings
This setting allows you to change the default settings for your
phone’s calendar. You can customise the calendar display
according to your needs.
1. From the Calendar display, press Options (right softkey) >
Settings.
2. Select one of the following options and press
:
Holiday to add or reset a holiday on the calendar (Set Date,
Set Weekly, Reset Date, Reset Weekly, or Reset All).
Display to change the display settings of the calendar
(Calendar View, Monthly View, or Time Starts at).
Alarm to change the alarm settings of the calendar
(Ringer Length, Snooze Interval, or Snooze Times).
3. Change the settings and press
.
8. Personal Organiser
65
Adding an Event to the Calendar
1. From the Calendar display, highlight the day to which you
want to add an event.
2. Press Options (right softkey) > Add Schedule.
3. Enter the description and press
.
Tip: While entering the description, you can also press Mode (right
softkey) to select a description from From To Do List or Fr. Schedule List.
(You need to store entries in those lists in advance. See “Adding To Do
Items” on page 68 for details.)
4. Select the following items you want to edit and press
:
Description to enter a description for the event.
Category to select an event category (Appointment,
Business, Meeting, Personal, Vacation, Travel, or
Miscellaneous).
Priority to select an event priority (None, High, or Low).
Start to schedule a start time for the event.
End to schedule an end time for the event.
Location to edit a location for the event.
Alarm to select a ringer for the alarm.
Alarm Time to edit the alarm time (number of hours or
minutes before the event starts). The default alarm time
is ten minutes before an event.
Repeat to select a repeating status for the event (Once,
Daily, Weekly, Monthly, or Yearly).
5. Press Save (left softkey) to save the event.
Tip: In the monthly view, days with events scheduled are indicated by a
small just to the left of the date. In the weekly view, times for which
you have scheduled events are displayed as coloured blocks.
66
8. Personal Organiser
Adding a Call Alarm to the Calendar
To add a call alarm to the calendar:
1. From the Calendar display, highlight the day to which you
want to add a call alarm and press Options (right softkey).
2. Press the navigation key left or right to select Add Call Alarm.
3. Enter the phone number directly or press Options (right
softkey) for the following options:
From Ph. Book to select the number from your Contacts.
Voicemail to select the number for voicemail access.
4. Select the following items you want to edit and press
:
Category to select a category for the call alarm
(Appointment, Business, Meeting, Personal, Vacation,
Travel, or Miscellaneous).
Time/Date to edit the start time and date.
Alarm to select the ringer alarm.
Repeat to set the Call Alarm’s repeating status (Once,
Daily, Weekly, Monthly, or Yearly).
5. Press Save (left softkey).
Tip: You can also add a call alarm from the Contacts menu.
(See “Contacts Entry Options” on page 60.)
To respond to a call alarm:
Press
or
to dial the phone number (if applicable).
To silence a call alarm:
Press any key to stop the alarm. (The alarm will stop and then
sound again after the selected snooze interval.)
Press and hold the Side Camera key to cancel snoozing.
Press Dismiss (right softkey) to dismiss the event.
Tip: To change the alert settings, from the calendar view, press Options
(right softkey) > Settings > Alarm to set the ringer length and snooze
options.
8. Personal Organiser
67
Adding To Do Items
Your phone can store and manage up to 40 To Do items.
1. From the Calendar display, press Options (right softkey).
2. Press the navigation key left or right to select Add To Do.
3. Enter the description and press
.
Tip: While entering the description, you can also press Mode (right
softkey) to select a description from From To Do List or Fr. Schedule List.
(You need to store entries in those lists in advance. See “Adding an
Event to the Calendar” on page 66 for details.)
4. Select an option you want to edit and press
:
Category to select an event category (Appointment,
Business, Meeting, Personal, Vacation, Travel, or
Miscellaneous).
Priority to select an event priority (None, High, or Low).
Due Time/Date to schedule a due time and date.
Status to select a status for the To Do items (Needs Action
or Completed).
5. Press Save (left softkey).
Adding a To Do List Item to the Calendar
1. From the Calendar display, press Options (right softkey).
2. Highlight Schedule List and press the navigation key left or
right and select To Do List.
3. Highlight the item you want to add to the schedule, and press
Options (right softkey) > Add to Schedule.
4. Modify the description field (if desired), and set the other
fields using your keypad and press . (See “Adding an Event
to the Calendar” on page 66.)
5. Press Save (left softkey).
68
8. Personal Organiser
Event Alerts
There are several ways your phone alerts you of scheduled
events:
By playing the assigned ringer.
By illuminating the backlight.
By flashing the LED.
Event Alert Menu
When you have an event alarm scheduled, your phone alerts you
and displays the event summary.
To silence an event alert:
Press any key to stop the alarm. (The alarm will stop and then
sound again after the selected snooze interval.)
Press and hold the Side Camera key to cancel snoozing.
Press Dismiss (right softkey) to dismiss the event.
Note: The alarm will not sound when the phone is powered off. However,
depending on the Power On to Alert setting, the alarm setting will
be active even if the phone is turned off. (See “Setting Power On
to Alert” on page 48.)
To change the alert settings, from the calendar view, press
Options (right softkey) > Settings > Alarm to set the ringer length
and snooze options.
Viewing Day’s Events
Note: Events include Schedule (see page 66), Call Alarm (see page 67)
and To Do items (see page 68).
1. From the Calendar display, highlight the day for which you
would like to view events and press . (If you have events
scheduled for the selected day, they will be listed in
chronological order.)
Tip: If you are in the weekly view, select a block that is coloured and
press
to display the event’s details.
2. To display the details of an event listed in the schedule, select
the event and press .
8. Personal Organiser
69
Editing an Event on the Calendar
To edit a scheduled event on the calendar, select the Weekly view.
To move an event:
1. Highlight the event you would like to move and press Options
(right softkey) > Move.
2. Use the navigation key to move the event to the date and time
you would like to and press .
To copy an event:
1. Highlight the event you would like to copy and press Options
(right softkey).
2. Highlight Move and press the navigation key left or right to
select Copy/Paste.
3. Use the navigation key to select the date and time you would
like to paste the copied event and press Paste (right softkey)
or .
To change the start or end time of an event:
1. Highlight the event for which you would like to change the
start or end time and press Options (right softkey).
2. Highlight Move and press the navigation key left or right to
select Resize.
3. Use the navigation key up and down to change the start time.
To change the end time, press Lower (right softkey), then use
the navigation key.
4. Press
.
Note: Use the right softkey (Upper or Lower) to toggle between:
• Upper to change the start time.
• Lower to change the end time.
To erase an event:
1. Highlight the event you would like to erase and press Options
(right softkey).
2. Highlight Move and press the navigation key left or right to
select Erase.
3. Press
70
> Yes.
8. Personal Organiser
Event List Options
While you are displaying the day’s events list, press Options (right
softkey) to access the following options:
Add Schedule to add an event to the calendar.
Add Call Alarm to add a call alarm to the calendar.
Add To Do to add a To Do item to the To Do List.
Schedule List to display the Schedule List on the calendar.
Call Alarm List to display the Call Alarm List on the calendar.
To Do List to display the To Do List on the calendar.
Edit to edit the event.
Set Cal. Secret to make an event secret.
Send Event to send the event via Bluetooth. (See page 136.)
Erase to erase the event.
Go to Date to jump to another date on the calendar.
View Memory to view the memory status saved in the
phone.
Erase Memory to erase memory saved in the phone.
Print to print the calendar events by using Bluetooth.
Erasing a Day’s Events
To erase a day’s scheduled events:
1. From the monthly calendar display, select the day for which
you would like to erase events and press .
2. Highlight an event and press Options (right softkey) > Erase.
3. Select an option and press
:
This to erase the selected event.
Select to check events and press Erase (left softkey).
All on This List to erase all events on the list.
4. Select Yes to erase the event(s).
Tip: To erase completed events, from the monthly view, press Options
(right softkey), and then select To Do List and follow steps 2 - 4 above.
Note: The Erase function will not delete events that you have designated
as “secret.” (See “Event List Options” above.)
8. Personal Organiser
71
To erase old scheduled events:
From the Calendar display, press Options (right softkey) >
Erase Memory > Erase Old > Yes.
To erase all scheduled events:
1. From the Calendar display, press Options (right softkey) >
Erase Memory > Erase All > Yes. (An alert will be displayed
asking you to confirm the deletion.)
2. Press Yes (left softkey) to erase all events.
Note: Scheduled events include Schedule (see page 66), Call Alarm (see
page 67), and To Do items (see page 68).
Going to a Specified Date
1. From the Calendar display, press Options (right softkey) >
Go to Date.
2. Enter the date by using the navigation key and/or the keypad
and press or OK (left softkey).
72
8. Personal Organiser
Using Your Phone’s Tools
Using the Alarm Clock
To set the alarm clock:
1. Select
> Tools > Alarm Clock.
Note: To set the alarm clock in a no-service area, press OK (left softkey)
in the “Set Current Time/Date” screen.
2. Select a number and press
.
3. Select the items you want to edit and press
:
Description to enter a description of the alarm.
Time to enter the alarm time.
Repeat to select the alarm frequency.
Alarm to set the alarm to On or Off.
4. Press Save (left softkey) to save the alarm settings.
Tip: Press the left softkey (On or Off) to toggle the alarm on and off.
To change the alarm settings, press Settings (right softkey) to set the
ringer length and snooze options.
Note: Alarm will not sound when the phone is powered off. However,
depending on the Power On to Alert setting, the alarm setting will be
active even if the phone is turned off. (See “Setting Power On to Alert”
on page 48.)
To stop the alarm:
Press any key to stop the alarm. (The alarm will stop and then
sound again after the selected snooze interval.)
Press and hold the Side Camera key to cancel snoozing.
Press Dismiss (right softkey) to dismiss the alarm.
8. Personal Organiser
73
Using the Stopwatch
To start the stopwatch:
Select
> Tools > More Tools > Stopwatch.
Press Start (left softkey) to start the stopwatch.
Press Stop (left softkey) to stop the stopwatch.
Press Resume (left softkey) to start the stopwatch again.
To record a lap time while the stopwatch is running:
Press Lap (right softkey) to record time of the first lap.
Press Lap (right softkey) again to record the next lap.
(You can record up to five laps. If you continue
recording, lap times will be deleted from the oldest.)
To display the stopwatch options:
1. From the stopwatch display, press Options (right softkey).
2. Select an option and press
:
Go to Lap List to display a saved lap list. Press Detail (left
softkey) to display the lap list details.
Save to Lap List to save the recorded lap times (if
applicable).
Reset to reset the time to zero and clear any recorded lap
times.
Using the Countdown Timer
This feature allows you to use the countdown timer with alarm
capabilities. You can set up to five timers.
1. Select
> Tools > More Tools > Countdown.
2. Select a number and press
.
3. Select the items you want to edit and press
:
Description to enter a description of the countdown.
Time to enter the countdown time.
Alarm to set the countdown alarm to On or Off.
4. Press Save (left softkey) to save the countdown settings.
5. Press Settings (right softkey) to set the Ringer Length,
Snooze Interval, or Snooze Times.
74
8. Personal Organiser
6. Press Done (left softkey) to save.
Tip: Press the left softkey (On or Off) to toggle the countdown alarm on
and off.
This feature is not available while your phone is turned off.
Using the World Clock
1. Select
> Tools > More Tools > World Clock.
2. Press the navigation key right or left to scroll through
different time zones.
Tip: Press Summer (left softkey) or Standard (right softkey) for changing
between summer and standard time, if applicable. The
while summer time is displayed.
icon is shown
Using the Calculator
1. Select
> Tools > More Tools > Calculator.
2. Enter numbers using your keypad. Press the left softkey to
insert a decimal point.
3. Press the appropriate navigation key for an arithmetic option.
(Up for addition, Down for subtraction, Left for multiplication,
Right for division.)
4. Enter numbers and press
for the result.
To clear the numbers, press CLR (right softkey).
8. Personal Organiser
75
File Manager
File Manager allows you to manage your files such as pictures,
videos, music and applications stored in the memories of both
your phone and microSD card. With this feature, you can sort,
move, erase, import, rename and open files more easily.
Accessing File Manager
1. Select
> Tools > File Manager.
2. Select an option and press
:
Phone to access the files in your phone. (The preset
folders will be displayed: My Albums, Voice, and
Bluetooth.)
microSD to access the files in your microSD card.
(The preset folders will be displayed: DCIM, MEDIA,
MUSIC, VOICE, SD_PIM and BLUETOOTH.)
File Manager Icon Indication
Content Type
Icons
File Extension
m3g
Picture
jpeg, jpg, wbmp, png, bmp, gif
Video
m4v, mp4, 3gp, 3gpp, 3gp2, 3g2, wmv, asf
mp3, aac, m4a, amr, wma
qcp, uvo
Audio
mid, midi
pmd
Contacts
vcf
Calendar
vcs
Unknown
unsupported file format
Opening Files in the File Manager
1. Select
> Tools > File Manager > Phone or microSD.
2. Select a folder and press
.
3. Use your navigation key to select an item you wish to open
and press .
76
8. Personal Organiser
Using File Manager Options
When you are navigating files and folders in the file manager,
several user options are available by pressing Options (right
softkey):
Move to move the file from the current folder to another
folder.
Move to microSD to move the file to your microSD card (if
available).
Move to Phone to move the file to your phone (if available).
Erase to delete the file or folder from File Manager (if
available).
Import to import the Contacts file or the calendar file.
Sort by to sort folder contents by name, date, or size.
Properties to view the properties of the file.
Rename to change the name of the selected file.
Note: You may not be able to use the file if you change the file name
extension.
Set as to set images as your wallpaper, screen saver, or Caller
ID for the Contacts entries.
Send via Bluetooth to send the file via Bluetooth. (See page 136.)
Print to print the image by using Bluetooth. (See page 135.)
Use Bluetooth to play the audio file via Bluetooth.
Create Folders to create the preset folders in the microSD card.
(See page 93.)
List/Thumbnail to switch to list view/thumbnail view.
View Memory to view the used and available memory space (if
available).
Go to microSD to access File Manager in the microSD card (if
available).
Go to Phone to access File Manager in your phone.
Play/Listen/View to play the video file/listen to the audio
file/view the picture file.
8. Personal Organiser
77
Sorting the Folder Contents
1. Select
> Tools > File Manager > Phone or microSD.
2. Select the folder that includes the content you want to sort
and press .
3. Press Options (right softkey) > Sort by.
4. Select an item (Name, Size, or Date) and press
.
5. Select Ascending or Descending.
Viewing Memory in File Manager
To view the used and available memory in File Manager:
1. Select
> Tools > File Manager > Phone or microSD.
2. Press Options (right softkey) > View Memory. (The used and
available memory space will be displayed.)
Personal Information Management
Displaying Your Phone’s Information
Select
> Settings > Phone Info > My Phone#.
Finding Icon Definition
1. Select
> Settings > Phone Info > Icon Glossary.
2. Select the item for which you want to see the explanation and
press .
Displaying the Version Information
Select
> Settings > Phone Info > Version.
Displaying Advanced Information
78
Select
> Settings > Phone Info > Advanced.
8. Personal Organiser
DownloadingThrough the Web Wirelessly
Your phone allows you to download images (screen savers),
ringers, games, etc., from a Web site.
To download a file from the My Content menu:
1. Select
> My Content > Options (right softkey).
2. Select Get New. (The browser will launch and display the
Downloads main screen.)
3. Select your desired file and follow the system prompts.
Confirming the Downloaded Data
The downloaded data will automatically be classified as games,
themes, ringers, images (screen savers), or applications.
However, if any data has a different category, it will be classified
as dynamic (the folder name is variable). If the data does not
belong to any of the above, it will be classified as others.
To confirm the downloaded data:
1. Select
> My Content.
2. Select your desired data folder (Games, Themes, Ringers,
Screen Savers, or Applications) and press .
3. Select the downloaded data you want to confirm and press
.
Tip: The names of dynamic folders are variable depending on data.
You can manage your contents in the browser.
To confirm your content manager:
1. Select
> My Content > Options (right softkey).
2. Select My Content Manager to launch the browser.
Tip: You can also access your content manager from any folder in the
My Content menu. After selecting a folder, select My Content Manager
to launch the browser.
8. Personal Organiser
79
Downloaded Data Options
Selecting Download Settings
This feature is available when you select a Java application.
1. Select
> My Content.
2. Select Games or Applications.
3. Highlight the data for which you want to select settings and
press Options (right softkey).
4. Select Settings.
5. Select an option from the following and press .
(Not all options may be displayed depending on the selected
data.)
Network Access to select Network Access availability.
Push Registry to select availability to communicate with
other mobile phones such as chat or match-up games (if
applicable).
File Connection to select the File Connection availability.
Extensions to select display availability of file extensions.
Multimedia Access to select Multimedia Access
availability.
Multimedia Camera to select Multimedia Camera access
availability.
6. Use your navigation key to select Always Allow, Ask, or
Never Allow.
7. Press
to save the setting.
Assigning the Downloaded Data
1. Select
> My Content.
2. Select Ringers or Screen Savers.
3. Highlight the data you want to assign and press Options (right
softkey).
4. Select Set as.
5. Select the menu you want to assign and press
80
8. Personal Organiser
.
Erasing the Downloaded Data
1. Select
> My Content.
2. Select a folder and press
.
3. Highlight a file and press Options (right softkey).
4. Select Erase.
5. Select Yes to erase the data in the folder you select.
Tip: To erase all data in the folder, select Erase All during step 4 above.
Note: It takes a while when you erase a large amount of downloaded
data. Some data will remain if you answer an incoming call during the
erasing process.
Selecting the Caller Tunes
Caller Tunes allow you to select ringback tones heard by the
calling party.
1. Select
> My Content.
2. Select Caller Tunes. (The browser will launch and take you to
the corresponding URL.)
Using Application Manager
Your phone allows you to run multiple applications
simultaneously. You can control applications using the
Application Manager.
1. Select
> My Content > Application Mgr.
2. Select an application or an alert and press Options (right
softkey) to display the following options:
View Alert to display an alert screen.
Ignore Alert to ignore the alert.
Bring to Front to display the application screen in the
foreground.
Exit Application to close the application.
Launch New App to launch a new application.
Exit to exit the option menu.
8. Personal Organiser
81
9. Voice Services
Using Voice-Activated Dialling
You can use a voice dial tag to automatically dial a phone
number in your Contacts. Your phone can store up to 30 voice
dial tags.
Note: Please set the Voice Guide feature (see page 34) to On before
using the voice-activated dialling so that you can hear the voice
instruction from the phone. The default setting is Off.
Making a Call Using Voice-Activated Dialling
With the phone open:
1. Press and hold
or
.
2. Follow the system prompts and recite the entry’s voice dial
tag into your phone’s microphone.
With the phone closed:
1. Press and hold the Side Volume key.
2. Follow the system prompts and recite the entry’s voice dial
tag into your phone’s microphone.
Note: To use this feature, you must have a stored entry for voice dialling
(see “Programming Voice Dial Tags” below).
Programming Voice Dial Tags
1. From the Contacts list display, select a Contacts entry to
which you want to add a voice dial tag and press .
2. Press Options (right softkey) > Set Voice Tag > Add.
3. The phone will prompt you to say the name you want to
program. Wait for the beep and then say the name.
4 Respond to the prompt by repeating the name after the beep.
(The display shows “Voice Tag Recorded.”)
If you set a voice dial tag, the
number on the Contacts list.
icon is shown next to the phone
Tip: Record voice dial tags in a quiet environment and without the aid of
an accessory.
82
9. Voice Services
Voice Dial Tag Options
1. From the Contacts list display, select a Contacts entry for
which you would like to review the voice dial tag and press
.
2. Press Options (right softkey) > Set Voice Tag.
3. Select an option and press
:
Play to play the selected voice dial tag.
Play:Speaker to play the tag in speakerphone mode.
Change to change the recorded voice dial tag.
Erase to erase the selected voice dial tag.
Erasing All Voice Dial Tags
1. Select > Settings > More... > Security, and then enter your
lock code. (The Security menu is displayed.)
2. Select Erase/Reset > Erase Voice Tags.
3. Press OK (left softkey) > Yes.
Managing Voice/Call Memos
You can use your phone’s voice services to record meetings or
lectures, or brief memos to remind you of important events,
phone numbers, or grocery list items.
Recording Voice Memos
To record a voice memo:
1. Select > Voice Memo > Record.
– or –
Press the Side Camera key > Voice Memo.
2. Start recording after the beep.
To end the recording of a voice memo:
Press
,
, or
.
Note: You can store up to 300 voice memos on your phone. The total
recording time depends on the available memory space on your
phone.
You can store up to 1000 voice memos on the microSD card. The
maximum recording time for a voice memo on the microSD card is
eight hours. The total recording time depends on the available
memory space on the microSD card.
9. Voice Services
83
To record a voice memo with the phone closed:
1. Press the Side Camera key.
2. Highlight Voice Memo using the Side Volume key and press the
Side Camera key.
3. Start recording after the beep.
To end the recording of your voice memo with the phone closed:
Press the Side Camera key.
Recording Call Memos
1. During a call, press Options (right softkey) > Call Memo Rec.
2. Start recording after the beep.
3. To finish recording, press
or
.
Recording also stops when the call is disconnected.
Note: Only the other party’s voice is recorded during this process.
Recorded call memos become “.uvo” file format data and can be
played only when accessed in the Voice data list.
Reviewing Voice/Call Memos
To play the voice/call memos you have recorded:
1. Select
> Voice Memo > List.
2. Select Voice(Phone) or microSD (if available).
3. Select a voice/call memo from the list and press .
– or –
Press Options (right softkey) > Play > This, Multiple, or All. (If
you have selected Multiple, choose your desired memos, and
then press Play [left softkey].)
Press Speed (left softkey) to change the playing speed.
Press Pause (right softkey) to pause.
Press Play (right softkey) to restart.
4. Press
to stop playing.
Tip: To set the speakerphone mode on or off, press Options (right
softkey) > Speaker On or Speaker Off during step 2 above.
84
9. Voice Services
Erasing Voice/Call Memos
To erase an individual voice/call memo:
1. Select
> Voice Memo > List.
2. Select Voice(Phone) or microSD (if available).
3. Highlight the memo you want to erase and press Options (right
softkey) > Erase > This > Yes.
To erase multiple voice/call memos:
1. Select
> Voice Memo > List.
2. Select Voice(Phone) or microSD (if available).
3. Press Options (right softkey) > Erase > Multiple.
4. Select the memos you would like to erase and press Erase (left
softkey) > Yes.
To erase all voice/call memos:
1. Select
> Voice Memo > List.
2. Select Voice(Phone) or microSD (if available).
3. Press Options (right softkey) > Erase > All > Yes to erase all voice
memos saved in the phone.
Setting the Recording Guard
With this feature, you can record voice memos without
interruption from incoming calls.
1. Select
> Voice Memo.
2. Press Settings (right softkey) > Recording Guard.
3. Select On or Off.
With this setting set to On, while recording voice memos, your
phone will display “Phone Off.” You cannot make or receive
calls.
9. Voice Services
85
Setting the Recording Mode
This feature allows you to match the sensitivity of the
microphone to the type of recording you are making.
1. Select
> Voice Memo.
2. Press Settings (right softkey) > Recording Mode.
3. Select one of the following options and press
Dictation to record a single voice.
Conference to record multiple voices.
:
Setting the Audio Quality
This feature enables you to set the quality of your recording.
1. Select
> Voice Memo.
2. Press Settings (right softkey) > Audio Quality.
3. Select High or Low.
Note: Recording time varies with the audio quality setting.
Setting the Storage Location
With this feature, recorded voice memos can be automatically
saved to your phone or microSD card.
1. Select
> Voice Memo.
2. Press Settings (right softkey) > Auto Save to.
3. Select an option and press
86
:
Phone to save recorded voice memos to your phone.
microSD to save recorded voice memos to the microSD
card.
Switch w/Card to save recorded voice memos to the
microSD card when the card is inserted. If the microSD
card is not present, the storage location will
automatically be switched to your phone.
9. Voice Services
Setting Up Screen Call
This feature enables you to screen incoming calls by using a
recorded announcement, either one that is pre-recorded or one
that you have recorded. You can also record the caller’s message
into the Voice data list.
Note: Recorded caller’s messages become “.uvo” file format data and
can be played only when accessed in the Voice data list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, press Options (right
softkey) > Screen Call.
To set Auto Screen Call:
1. Select
> Voice Memo > Screen Call > Auto > On.
2. Set the answer delay by using numeric keys or by pressing the
navigation key up or down.
3. Press or OK (left softkey). The
standby display.
icon is displayed on the
Tip: While the caller’s message is being recorded, press
the call, or press
to answer
to stop recording and disconnect the call.
Selecting an Announcement for Screen Call
1. Select
> Voice Memo > Screen Call > Announcement.
2. Depending on your preference, select Pre-Recorded or Custom.
9. Voice Services
87
Recording Your Name for a Pre-Recorded
Announcement
1. Select
> Voice Memo > Screen Call > Announcement.
2. Highlight Pre-Recorded and press Edit (right softkey) >
Record Name.
If your name has already been recorded, select Yes or No
for overwriting.
3. Press to start the first recording. (The maximum recording
time is 12 seconds.)
4. Press
to stop recording.
5. After the first recording, press
recording.
6. Press
again to start the second
to stop recording.
Recording a Customised Announcement
1. Select
> Voice Memo > Screen Call > Announcement.
2. Highlight Custom and press Edit (right softkey) > Record.
If your announcement has already been recorded, select
Yes or No for overwriting.
3. Press to start the first recording. (The maximum recording
time is 12 seconds.)
4. Press
to stop recording.
5. After the first recording, press
recording.
6. Press
again to start the second
to stop recording.
Reviewing an Announcement
1. Select
> Voice Memo > Screen Call > Announcement.
2. Highlight Pre-Recorded or Custom and press Edit (right softkey) >
Play or Play:Speaker.
Erasing an Announcement
1. Select
> Voice Memo > Screen Call > Announcement.
2. Highlight Pre-Recorded or Custom and press Edit (right softkey).
3. Select Erase Name or Erase. (A confirmation will be displayed.)
4. Select Yes.
88
9. Voice Services
10. microSD Card
Using Your Phone’s microSD Card and
Adapter
Using the microSD Card
Your phone is equipped with a 128MB microSD memory card
and adapter to expand the phone’s available memory space. It
allows you to easily store images, music, voice memo, and
Contacts data in your phone.
Note: Make sure your battery is fully charged before using the microSD
card. Your data may become damaged or unusable if the battery
runs out while using the microSD card.
This phone does not support the microSD card security function.
Important Note: Be sure to use only recommended microSD cards
(64MB-4GB). Using non-recommended microSD cards could cause data
loss and damage your phone. We recommend using the
microSD/TransFlash memory cards listed below:
SanDisk microSD Memory Card: 64MB-4GB
SanDisk TransFlash Memory Card: 32MB-512MB
10. microSD Card
89
Inserting the microSD Card
To insert the microSD card into your phone:
1. Face up the speaker of your phone, open the microSD slot
cover, and insert a microSD card into the slot with the triangle
marking facing up (with the gold terminals facing down). (See
illustration below.)
2. Gently press the card until it snaps into place.
3. Close the slot cover.
Speaker
Removing the microSD Card
To remove the microSD card from your phone:
1. Face up the speaker of your phone, open the microSD slot
cover, and push the top of the card into the slot to unlock it
(see illustration below).
2. Gently slide the card out of the slot.
3. Close the slot cover.
Speaker
90
10. microSD Card
Note: The microSD card and its adapter can be easily damaged by
improper operation. DO NOT touch the terminals (connection
surface) directly with hands when inserting, removing, or handling
them.
The microSD card slot cover may come off if forcibly pulled. If this
occurs, simply place the cover back into its original position.
DO NOT remove a microSD card while files are being accessed or
transferred. It will result in loss or damage of data.
microSD Icon Indications
The following icon will appear on your phone’s display screen
when a microSD card is properly inserted into the microSD slot:
Status Icon
Meaning
This icon indicates a microSD card has been
inserted into your phone. It turns to green
while the microSD card is being accessed.
10. microSD Card
91
Using the microSD Adapter
The supplied microSD adapter allows microSD cards to be used
in SD-compatible devices. Before using the SD-compatible host,
you will need to insert the microSD card into the microSD
adapter.
To insert the microSD card into the microSD adapter:
With the label side of the microSD card facing up, insert the
card into the provided microSD adapter and gently slide the
card until it is fully inserted.
To remove the microSD card from the microSD adapter:
Hold the front edge of the microSD card and gently pull
outward to remove it.
Important: To protect your vital data when using the microSD adapter,
lock the write-protect switch to prevent inadvertent overwriting of data.
Write-Protect
Switch
LOCK
Note: When you are not using a microSD card, make sure to replace the
microSD card slot cover.
92
10. microSD Card
microSD Settings
Creating Folders in the microSD Card
The following steps allow your phone to create default folders
for storing files in your microSD card.
1. With the microSD card inserted, select
File Manager > microSD Options.
> Tools >
2. Select Create Folders. (The phone will create the microSD’s
default folders: DCIM, MEDIA, MUSIC, VOICE, SD_PIM, and
BLUETOOTH.)
Viewing Memory in the microSD Card
With this feature, you can display the memory used and available
in the microSD card.
To view the used and available memory in the inserted microSD
card:
1. With the microSD card inserted, select
File Manager > microSD.
> Tools >
2. Press Options (right softkey) > View Memory. (The used and
available memory space will be displayed.)
Formatting the microSD Card
Formatting a microSD card permanently removes all files
currently stored on the card.
1. With the microSD card inserted, select
File Manager > microSD Options.
> Tools >
2. Select Format. (A warning will be displayed.)
3. If you are sure you wish to remove all of the files from your
microSD card, select Yes.
Note: The formatting procedure erases all the data on the microSD card
and the erased data CANNOT be retrieved. To prevent the loss of
important data, please check the contents before you format the
card.
Please format your microSD card using only the SCP-8500. Using
another device may result in incorrect formatting.
10. microSD Card
93
microSD Files
Displaying Your microSD Files
All the files stored in your microSD card are accessible through
your microSD files menu.
To access the microSD files:
1. With the microSD card inserted, select
File Manager > microSD.
> Tools >
2. Select a folder (DCIM, MEDIA, MUSIC, VOICE, SD_PIM, or
BLUETOOTH).
3. To view or play a file, highlight it with your navigation key,
and then press or the appropriate softkey.
Note: You can store up to 1000 files in each folder on the microSD card.
Warning! Exceeding the maximum number of files could cause damage
to your microSD card and void the warranty.
Backing Up Your Contacts Data to the
microSD Card
With your phone, you can easily back up your Contacts data to
the microSD card.
1. Select
> Tools > File Manager > microSD Options.
2. Select Save Phone Book.
3. Select Yes to proceed. (Please wait while the system creates
your data.)
4. Press OK (left softkey) to complete.
Note: DO NOT remove your microSD card while files are being accessed
or transferred. It will result in a loss of or damage to the data.
94
10. microSD Card
Setting Up the Digital Print Order Format
The Digital Print Order Format (DPOF) is a tool that allows you
to set up your digital picture print orders in advance. You can
use it to set options such as which pictures to print, the number
of prints for each picture, and index print settings.
To set up the DPOF:
1. With the microSD card inserted, select > Tools >
File Manager > microSD Options > DPOF Print Order.
2. Select Standard Print or Index Print.
3. Press Options (right softkey) and select an option from the
following:
Select Picture to select the pictures you want to print.
(You may select up to 99 pictures.)
Picture Info to display picture information.
Unselect Picture to unselect the picture you have
selected.
Set No. of Copies to set the number of copies you want to
print. (The maximum number of copies that you can
select is 99 copies.)
Exit to exit the menu.
4. When you have finished setting the print options, press Save
(left softkey).
If you are setting the print options for standard prints,
you will be prompted to choose whether to print the
date. Select Yes or No.
Note: Pictures not taken on this phone may not be printable.
Depending on your printer, some options may not be available.
The Digital Print Order Format service is currently not available.
10. microSD Card
95
Clearing the DPOF Print Order
You can clear the DPOF Print Order for standard prints and
index prints at the same time.
1. With the microSD card inserted, select > Tools >
File Manager > microSD Options > DPOF Print Order.
2. Select Clear Order.
Reviewing an Order Summary
1. With the microSD card inserted, select > Tools >
File Manager > microSD Options > DPOF Print Order.
2. Select Order Summary. (The selected print options will be
displayed.)
96
Press Switch (right softkey) to switch the display
between Standard Print and Index Print.
10. microSD Card
Connecting Your Phone to Your PC
Before using your phone’s mass storage capabilities, you need to
prepare your device’s data services to synchronise with your
desktop or laptop computer. Once the phone is connected to
your PC, you can transfer your data in the microSD card quickly
and easily in Mass Storage mode.
Note: Make sure your battery is fully charged and your microSD card
has been inserted in the phone before using the Mass Storage
feature.
We recommend using Windows 2000/XP/Vista. Synchronisation is
guaranteed only for computers using one of these operating
systems.
To avoid loss of data, DO NOT remove the USB cable, microSD
card, or the battery while files are being accessed or transferred.
DO NOT turn off or restart your computer, or put it into standby
mode, while using the Mass Storage device. Doing so will result in
loss or damage of data.
While you are connected to the computer, your phone’s screen
will display “Phone Off.” You cannot make or receive calls.
DO NOT change or edit the folder/file name in the microSD card
via the computer or attempt to transfer large amounts of data from
the computer to the microSD card, as these actions could result in
microSD card failure.
Peripheral devices may not work correctly if connected to the
Mass Storage device.
Fixed folders are displayed when you access to the microSD card
via your computer in Mass Storage mode. Your data is stored as
follows:
DCIM folder: pictures, videos
EPM folder: additional information used by data in DCIM folder
MEDIA folder: media player data
MUSIC folder: music data purchased in the Telecom Music Store
MISC folder: DPOF data
SD_PIM folder: Contacts data
VOICE folder: voice data
BLUETOOTH folder: data transmitted via Bluetooth
10. microSD Card
97
Using Mass Storage Feature
To use Mass Storage feature:
1. Select
> Tools > More Tools > Mass Storage > Yes.
2. Connect your phone to your PC using a USB cable (not
included). (Wait for the connection to be completed. When
connected, the host computer will automatically detect your
phone.)
To remove the connection:
98
When you have finished transferring data, press Done (left
softkey) > Yes on your phone or click the USB device icon on
your computer’s taskbar, and follow the onscreen instructions
to safely unplug the USB cable. (The process may vary
depending on the PC.)
10. microSD Card
11. Messaging
New Messages
When you receive a text message, it will automatically appear
on your phone’s main display screen with the
icon. When
you receive a picture message, the information of the message
appears on your phone’s main display screen with the
icon. Press View (left softkey) to view the message.
Note: When there are two or more notifications, a Missed Alerts list is
displayed in standby mode. Highlight a text/picture message in the list
and press View (left softkey) to display the message details.
Use your navigation key to scroll down and view the entire
message:
Press Call (left softkey) to dial the callback number.
Press Reply (left softkey) to reply to the sender.
Press Options (right softkey) to display options.
Displaying Messages
To display a text message from the main menu:
1. Select
> Messaging > Text.
2. Select Inbox, Sent Mail, Pending, Drafts, or your defined folder
and press .
3. Select the message you want to see and press . (To display
the message options, press Options [right softkey].)
Tip: Press the navigation key right to read the next message from the
message detail display; press the navigation key left to read the previous
message (Inbox, Sent Mail, and your defined folder only).
To display a picture message from the main menu:
1. Select
> Messaging > Picture Msg.
2. Select Inbox, Sent Msg, Saved Msg, Pending, or your defined
folder and press .
3. Select your desired picture message and press
.
11. Messaging
99
Sending a Text Message
1. Select
> Messaging > Send Message > Text.
2. Select the entry method you prefer:
Contacts to select a recipient from your internal Contacts.
(Qualifying Contacts entries must contain a phone
number or an email address.)
Phone# to use the keypad to enter the phone number of
the person to whom you wish to send a message.
Email to enter the recipient’s email address.
Note: You can also press Others (right softkey) to select recipients from
a list.
3. Press to confirm the recipient. (You may include up to 25
recipients per message.)
4. Press Next (left softkey) when you have finished selecting and
entering recipients.
5. Compose a message or use the preset messages or icons, and
press or OK (left softkey).
Use your keypad to type your message. Press Mode (right
softkey) to select a character input mode. (See “Selecting
a Character Input Mode” on page 25.)
6. Scroll down to select the message priority (Ordinary or Urgent),
set the callback number, and/or set the signature.
7. Review your message and press Send (left softkey). (You may
also select additional messaging options by pressing Options
[right softkey] to change the recipients or save to the Drafts
folder.)
Tip: You can also send a text message when the left softkey displays the
Send Msg option.
100
11. Messaging
Creating Folders for Messages
You can create up to ten folders to store your messages. When
ten of your defined folders exist, the Create Folder option will
not appear.
To create a new folder:
1. Select
> Messaging >Text.
2. Press Options (right softkey) > Create Folder.
3. Enter a folder name and press
or OK (left softkey).
4. Press Save (left softkey).
To set an optional feature for the added folder:
1. During step 3 above, scroll down to select other menu options:
Auto Filing to file messages into the folder automatically.
The following options appear when this feature is set to On.
Keyword to set a keyword for Auto Filing. Enter a
keyword and press .
Notify to set the notification display to On or Off when
you have an unread message matching the defined
folder.
Envelope Icon to set the envelope icon display to On or
Off when you have unread message matching the
defined folder.
2. Press Save (left softkey).
11. Messaging
101
Erasing Messages
Erasing Text Messages
To erase a text message:
1. Select
> Messaging >Text.
2. Select Inbox, Sent Mail, Pending, Drafts, or your defined folder
and press .
3. Highlight the message you want to erase and press Options
(right softkey) > Erase.
4. Select This.
Tip: This option may not be displayed if you save only one message in a
folder.
To erase all messages, select All.
5. Select Yes.
To erase multiple text messages:
1. Select
> Messaging > Text.
2. Select Inbox, Sent Mail, Pending, Drafts, or your defined folder
and press .
3. Press Options (right softkey) > Erase > Multiple.
4. Press
to select messages to be erased.
5. Press Erase (left softkey).
Erasing Picture Messages
1. Select
> Messaging > Picture Msg.
2. Select Inbox, Sent Msg, Saved Msg or Pending.
3. If you select Pending, highlight the message you want to erase
and press Delete (right softkey) > OK (left softkey) > OK (right
softkey).
4. If you select the other folders, highlight the message you want
to erase and press Options (right softkey) > Delete or Remove >
OK (left softkey) > OK (right softkey).
102
11. Messaging
12. Built-in Camera
Taking Pictures
Taking pictures with your phone’s built-in camera is as simple as
choosing a subject, pointing the lens, and pressing a key. You
can activate the phone’s camera mode and take pictures
whether the phone is open or closed.
To take a picture with the phone open:
1. Select > Pictures > Camera to activate camera mode.
(Additional camera options are available through the camera
mode Options menu. See “Camera Mode Options” on page 105
for more information.)
Shortcut: You can also activate camera mode by pressing and holding
or the Side Camera key.
2. Using the phone’s Main Screen as a viewfinder, aim the
camera lens at your subject.
3. Press
, , Capture (left softkey), or the Side Camera key,
until the shutter sounds.
Tip: The picture will automatically be saved in your selected storage
area. (See “Setting the Storage Area” on page 113 for details.)
To return to camera mode to take another picture, press
the Side Camera key.
,
, or
4. Press Options (right softkey) for more options:
Take New Picture to return to camera mode to take
another picture.
Send to Contacts to send your picture. (See page 116 for
details.)
Print to print the pictures. You can choose whether to
pick up your prints at a retail store, have them mailed to
you, use a PictBridge-enabled printer (see page 121), or
use a Bluetooth-enabled printer (see page 135).
Note: The Print service is currently not available.
12. Built-in Camera
103
Post to Services to access available services. Select Update
to display the latest services.
Note: The Post to Services service is currently not available.
Upload to upload the picture you just took to the Xtra
Online Gallery.
Review Media to go to the In Phone folder or microSD
folder (if available) to review your saved pictures.
Send via Bluetooth to send a picture via Bluetooth.
Set as to assign the picture. Select an option and press
Delete to delete the picture you just took.
Details/Edit to edit or display your picture’s details.
To take a picture with the phone closed:
1. Press the Side Camera key to activate the launch menu.
2. Select Camera.
3. Point the camera lens at your subject. (You can check the
picture framing through the external display screen.)
Note: When taking a picture with the phone closed, the subject image
appears in reverse on the Outer Screen. The captured image will not be
saved in reverse.
4. Press the Side Camera key to take the picture.
104
12. Built-in Camera
.
Camera Mode Options
When the phone is open and in camera mode, press Options
(right softkey) to display additional camera options:
Picture Mode to select a picture mode from Normal,
Beach/Snow, Scenery, Mirror Image, or Night/Dark.
Zoom to zoom in on a subject. (See “Using the Zoom” on page
106 for details.)
Self-Timer to activate the camera’s timer. (See “Setting the SelfTimer” on page 106 for details.)
Fun Tools to select an option from the following:
Multiple Shots to take multiple shots. (See “Taking
Multiple Shots” on page 107.)
Fun Frames to select your favourite fun picture frame to
decorate your picture.
Note: Fun Frames is not available when the resolution setting is 1.3M.
(See “Selecting Camera Settings” on page 107 for details.)
Colour Tone to select a wide variety of colour tones for the
picture.
Image Controls to set the Brightness, White Balance, Sharpness,
or Contrast.
Camera Settings to select your settings. (See “Selecting Camera
Settings” on page 107 for details.)
Review Media to go to the In Phone folder or microSD folder (if
available) to review your saved pictures.
Camcorder Mode to switch to video mode. (See “Recording
Videos” on page 110 for details.)
Key Guidance to indicate the key functions in camera mode.
User Settings to select your favourite setting. (See “Setting
Your Favourite Mode” on page 108.)
12. Built-in Camera
105
Using the Zoom
This feature allows you to zoom in on an object when you take a
picture. Depending on your resolution settings, you can adjust
the zoom from 1x to 12x.
1. From camera mode, press the navigation key right or left, or
the Side Volume key up or down to adjust the zoom. (The
gauge bar appears.)
2. Press Capture (left softkey), ,
, or the Side Camera key to
take the picture. (The picture will automatically be saved in
your selected storage area.)
Setting the Self-Timer
To activate the self-timer:
1. From camera mode, press Options (right softkey) > Self-Timer.
2. Select the length of delay you want the timer to use
(10 Seconds or 5 Seconds) and press .
To deactivate the self-timer, select Off.
3. Press or Start (left softkey) when you are ready to start the
timer. (The icon appears on the upper right portion of the
Main Screen during the self-timer countdown.)
4. Get ready for the picture. (When the timer is down to three
seconds, the self-timer icon will turn red and the phone will
begin to beep.)
To cancel the self-timer after it has started:
Press Cancel (right softkey).
Note: While the self-timer is active, all keys are disabled except
, and Cancel (right softkey).
106
12. Built-in Camera
,
Taking Multiple Shots
This feature allows you to take up to nine continuous shots in
sequence. When you take multiple shots, the icon will be
displayed in the viewfinder.
1. From camera mode, press Options (right softkey) > Fun Tools >
Multiple Shots.
Note: When taking multiple shots, the resolution is temporarily set to
Low-(240x320).
2. Select an available option and press
.
3. Select the duration of the interval between shots (Normal or
Fast ) and press .
4. Press Capture (left softkey), ,
, or the Side Camera key to
take the pictures. (The pictures will automatically be saved in
your selected storage area and the Multiple Shots folder will
be displayed up to nine thumbnail pictures per screen.)
5. Press Options (right softkey) to display picture options, or
press
,
, or the Side Camera key to return to camera
mode to take another picture.
Selecting Camera Settings
1. From camera mode, press Options (right softkey) >
Camera Settings.
2. Select an option from the following and press
.
Resolution to select a picture’s file size (1.3M-960x1280,
Medium-480x640, or Low-240x320).
Quality to select the picture quality setting (Fine, Normal,
or Economy).
Shutter Sound to select a shutter sound (Default,
Say “Cheese,” “Ready,” or Off).
Status Bar to switch the status bar display to On or Off.
Auto Save to to select the storage area for the pictures
(In Phone, In microSD, or Switch w/Card). (See “Setting the
Storage Area” on page 113.)
Save Setting to select the way to save pictures (Auto or
Manual).
12. Built-in Camera
107
Setting Your Favourite Mode
With your phone, you can customise various camera settings.
This feature allows you to save your favourite setting.
1. From camera mode, select your favourite setting. (See
“Camera Mode Options” on page 105 and “Selecting Camera
Settings” on page 107.)
2. Press Options (right softkey) > User Settings.
3. Select an unassigned number and press Add (right softkey)
> Yes.
4. Enter a title and press
.
Tip: You can also set your favourite mode for camcorder settings. Set
your favourite setting in video mode and follow steps 2-4 above.
Using the Settings & Info Menu
The Settings & Info menu allows you to set up many of the
settings of your phone’s Pictures function.
To access the settings and info menu:
1. Select
> Pictures > Settings & Info.
2. Select an option from the following and press
.
Auto Save to to select the storage area for the pictures and
videos. (See “Setting the Storage Area” on page 113.)
Location to select whether to include the location
information.
Note: The Location feature is currently not available.
108
Status Bar to select whether to display the information
bar for the pictures.
Slideshow Interval to set the slideshow interval time.
Account Info to view your account information.
Help to view the Pictures instruction page.
12. Built-in Camera
Camera Icon Indication
Function
Storage
Area
Picture
Mode
White
Balance
Icons
Details
In Phone
Appears when the storage destination is your phone.
In microSD
Appears when the storage destination is the microSD
card.
Beach/Snow
Use this setting in bright light.
Scenery
Use this setting for scenery from a distance.
Mirror Image
Use this setting to take a mirror image.
Night/Dark
Use this setting in low light.
Sunny
Use this setting for sunny weather.
Cloudy
Use this setting for cloudy weather.
Tungsten
Fluorescent
Use this setting for standard household lighting.
Use this setting for fluorescent lighting.
Manual
To set the white balance manually.
Brightness
Manual
To set brightness manually.
Sharpness
Manual
To set sharpness manually.
Contrast
Manual
To set contrast manually.
1.3M
Resolution
Medium
Low
Self-Timer
Multiple Shots
For 1.3 megapixel picture resolution.
For medium picture resolution.
For low picture resolution.
Numeric countdown will appear when the
self-timer has been activated.
Use this setting for multiple shots.
12. Built-in Camera
109
Recording Videos
In addition to taking pictures, you can also record, view, and
send videos to your friends and family with your phone’s built-in
camcorder.
To take a video with the phone open:
1. Select > Pictures > Camcorder to activate video mode.
(Additional video options are available through the video
mode Options menu. See “Video Mode Options” on page 111
for more information.)
2. Using the phone’s Main Screen as a viewfinder, aim the
camera lens at your subject.
3. Press Record (left softkey),
begin recording.
,
, or the Side Camera key to
4. Press
, Stop (right softkey), or the Side Camera key to stop
recording.
Tip: The recorded video is automatically saved in your selected storage
area. (See “Setting the Storage Area” on page 113 for details.)
To return to video mode to take another video, press
Side Camera key.
,
, or the
5. Press Options (right softkey) for more options:
Take New Video to return to video mode to take another
video.
Play to play the video you just took.
Send to Contacts to send your video. (See page 116 for
details.)
Post to Services to access the available services. Select
Update to display the latest services.
Note: The Post to Services service is currently not available.
110
Upload to upload the video you just took to the Xtra
Online Gallery.
Review Media to go to the In Phone folder or microSD
folder (if available) to review your saved videos.
Send via Bluetooth to send the video via Bluetooth.
Set as to assign the video. Select an option and press
12. Built-in Camera
.
Delete to delete the video you just took.
Details/Edit to edit or display your video’s details.
To take a video with the phone closed:
1. Press the Side Camera key to activate the launch menu.
2. Using the Side Volume key, select Camcorder.
3. Point the camera lens at your subject. (You can check the
video framing through the Outer Screen.)
4. Press the Side Camera key to start recording.
5. Press the Side Camera key to stop recording.
Video Mode Options
Several options are available from video mode.
Press Options (right softkey) to display additional options:
Video Mode to select a video mode from Normal, Beach/Snow,
Scenery, Mirror Image, or Night/Dark.
Zoom to zoom in on an object. You can adjust the zoom from
1x to 12x.
Shortcut: To adjust the zoom, press the navigation key right or left in
video mode.
Self-Timer to activate the timer function. (See “Setting the SelfTimer” on page 106 for details.)
Colour Tone to select a wide variety of colour tones for your
video.
Image Controls to select an option from Brightness,
White Balance, or Contrast.
CamcorderSettings to select your settings. (See “Selecting
Camcorder Settings” on page 112 for details.)
Review Media to go to the In Phone folder or microSD folder (if
available) to review your saved videos.
Camera Mode to switch to camera mode. (See “Taking
Pictures” on page 103 for details.)
Key Guidance to indicate the key functions in video mode.
User Settings to select your favourite setting. (See “Setting
Your Favourite Mode” on page 108.)
12. Built-in Camera
111
Selecting Camcorder Settings
1. From video mode, press Options (right softkey) >
CamcorderSettings.
2. Select an option from the following and press
:
Resolution to select a file size (High-176x144 or
Medium-128x96) for a video.
Quality/Length to select video quality from Normal-35sec.,
Fine-25sec., or 120min. microSD.
Silent Movie to select On to record without sounds. Select
Off to deactivate this feature.
Cue Sound to select a cue sound. (Default, “Action & Cut,”
“Ready & Stop,” or Off).
Best Fit Size or Actual Size to switch the viewing size.
Skins to select your favourite frame.
Auto Save to to select the storage area for the videos. (See
“Setting the Storage Area” on page 113.)
Note: Recording time varies depending on the Quality/Length setting.
Video Icon Indication
Function
Storage
Area
Icons
Details
In Phone
Appears when the storage destination is your phone.
In microSD
Appears when the storage destination is the microSD
card.
White Same as Camera Icon Indication. (See page 109 for details.)
Balance
Brightness
Video
Mode
Contrast
Manual
To set brightness manually.
Same as the Picture Mode in Camera Icon Indication. (See page 109 for details.)
Manual
To set contrast manually.
High
For high video resolution.
Resolution
Medium
Silent
Movie
On
Appears when the silent movie setting is on.
Off
Appears when the silent movie setting is off.
Self-Timer
112
For medium video resolution.
12. Built-in Camera
Numeric countdown will appear when the
self-timer has been activated.
Storing Pictures and Videos
There are three types of storage areas for your pictures and
videos that can be used separately according to your needs:
In Phone (see below)
In microSD (see page 114)
Online Albums (see page 118)
Setting the Storage Area
With this feature, pictures and videos you have taken can be
automatically saved to the storage area such as your phone or
microSD card.
1. Select
> Pictures > Settings & Info > Auto Save to.
2. Select an option and press
:
In Phone to save pictures and videos to your phone.
In microSD to save pictures and videos to the microSD
card.
Switch w/Card to save pictures and videos to the microSD
card when the card is inserted. If the microSD card is not
inserted, the storage location will automatically be
switched to your phone.
In Phone Folder
The picture/video storage area used on your phone is called the
In Phone folder. From the In Phone folder, you can view pictures
and videos saved in your phone, delete images, and access
additional options.
To review your pictures and videos saved in the In Phone folder:
1. Select > Pictures > My Albums > In Phone. (Thumbnails will
be displayed, up to nine at a time.)
2. Use your navigation key to view and scroll through the
pictures and videos.
12. Built-in Camera
113
microSD Picture and Video Folder
You can save pictures and videos directly to the microSD card
using your phone’s pictures and videos settings. A maximum of
1000 pictures can be stored and managed in each folder on the
microSD card.
To review your stored data in the microSD card:
1. Select
> Pictures > My Albums > In microSD.
2. Use your Navigation key to scroll through and view saved
data.
In Phone Folder and microSD Files Options
When you are viewing the In Phone folder or the microSD card,
press Options (right softkey) to display the following options:
Play to play your videos.
Send to Contacts to send your pictures and videos. (See page
116 for details.)
Upload to upload pictures and videos from the In Phone folder
or the microSD card to the Xtra Online Gallery.
Print to print the pictures. You can choose whether to pick up
your prints at a retail store, have them mailed to you, use a
PictBridge-enabled printer (see page 121), or use a Bluetoothenabled printer (see page 135).
Note: The Print service is not currently available.
Post to Services to access available services. Select Update to
display the latest services.
Note: The Post to Services service is currently not available.
114
Send via Bluetooth to send your pictures and videos via
Bluetooth.
Set as to assign the picture or video. Select an option and
press .
Delete to delete pictures and videos.
Copy/Move to SD to copy or move pictures and videos from
your phone to your microSD card.
Copy/Move to Ph. to copy or move pictures and videos from the
microSD card to your phone.
12. Built-in Camera
Copy/Move to copy or move pictures and videos from a
microSD card folder to another microSD card folder or from
an Online Albums folder to another Online Albums folder.
Details/Edit to edit or display the details of your picture/video.
Slideshow to view your pictures in slideshow mode.
Media Filter to filter only pictures, only videos, or to display all
media files.
Album List to display the album list.
Camera Mode to activate camera mode.
Camcorder Mode to activate video mode.
Assigned Media Folder
When you assign a picture or video, it will automatically be
saved in the Assigned Media folder. This folder allows you to
store copies of pictures and videos on your phone and to assign
them to various phone tasks.
To save a picture or video to the Assigned Media folder:
1. From the In Phone folder (see “In Phone Folder” on page 113)
or the In microSD folder (see “microSD Picture and Video
Folder” on page 114), select a picture or video you wish to
save to the Assigned Media folder and press .
2. Press Options (right softkey) > Set as.
3. Select an option and press , then follow the onscreen
instructions to assign. (A copy of the picture will
automatically be saved to the Assigned Media folder.)
To view pictures and videos stored in the Assigned Media folder:
1. Select
> Tools > Assigned Media.
2. Use your navigation key to view and scroll through the
pictures and videos.
12. Built-in Camera
115
Sending a Picture Message
Once you have taken a picture or video, you can use the
messaging capabilities of your phone to instantly send it to
family and friends. You can send pictures or videos to up to 25
people at a time using their email addresses or their mobile
phone numbers.
Sending Pictures/Videos From the In Phone Folder
1. Select
> Pictures > My Albums > In Phone.
2. Select a picture or video you wish to send and press . (The
check box on the lower right corner will be marked. You can
select multiple pictures and videos.)
3. Press Options (right softkey) > Send to Contacts. (You will see a
message on the display.)
4. Select an option from the following and press
:
Contacts to select recipients from your Contacts.
Highlight a recipient and press to select.
Phone# to enter a phone number directly.
Email to enter an email address directly.
Tip: You can also press Others (right softkey) to select recipients from
your desired list.
5. Press Next (left softkey) when you have finished adding
recipients. (You may include up to 25 recipients per
message.)
6. If you wish to include a subject, scroll to Subject and enter
your subject using the keypad.
7. If you wish to include a text message, scroll to Text, and then
enter your message using your keypad (or press Mode [right
softkey] to change the input mode). (See “Entering Text” on
page 25.)
8. If you wish to include a voice message with the picture and
video, scroll to Audio and press Record (right softkey) to
record. (The maximum recording time is ten seconds.)
9. To set the priority, scroll to Priority, and then select High,
Normal or Low.
116
12. Built-in Camera
10. Confirm the recipients, message, voice message, and picture
or video. (You may also select additional options by pressing
the right softkey. Follow the onscreen instructions to add
available options.)
11. Press the appropriate softkey to send the pictures and videos.
Sending Pictures/Videos From Messaging
You can also send your pictures/videos from your phone’s
Messaging menu.
1. Select
> Messaging > Send Message > Picture Msg.
2. Select Contacts, Phone#, or Email to select or enter recipients.
3. Press Next (left softkey).
4. Select In Phone, In microSD, or Online Albums.
5. Use the navigation key to select the picture or video you wish
to send and press . (You can select multiple pictures and
videos.)
6. Press Next (left softkey). To complete and send the pictures or
videos, follow steps 6-11 in “Sending Pictures/Videos From
the In Phone Folder” on page 116.
Tip: To take and send a new picture or a video from Messaging, select
Take New Picture or Take New Video during step 4 above, take the new
picture or video, press Next (right softkey) and follow steps 6-11 in
“Sending Pictures/Videos From the In Phone Folder” on page 116.
12. Built-in Camera
117
Managing Pictures/Videos
Each time you send pictures/videos from your phone, copies are
automatically uploaded into your Online Gallery if you have
signed up for Photo Messaging service. You can manage the
pictures/videos saved in your Online Gallery. You can also
manage your pictures/videos from your phone.
Using the Xtra Online Gallery
To sign up for access to the Xtra Online Gallery:
From any PC with an Internet connection, go to
http://www.xtra.co.nz/mobile > Photo and Video Messaging
Online Gallery > Online Gallery > Open Gallery.
ManagingYour Pictures/Videos FromYour Phone
You can use your phone to manage, edit, or share pictures or
videos you have uploaded to the Xtra Online Gallery.
1. Select
> Pictures > My Albums > Online Albums.
2. Select an album title and press
images.
to display thumbnail
Tip: To expand a selected picture from a thumbnail view, press Expand
(left softkey).
3. Use your navigation key to select a picture or video.
4. Press Options (right softkey) to display your online picture or
video options.
Uploading Pictures/Videos
1. Select > Pictures > My Albums > In Phone.
(Thumbnail pictures will be displayed.)
2. Check the picture(s)/video(s) you wish to upload, and then
press Options (right softkey) > Upload.
3. Select Selected or All.
4. Select “Uploads” Area or Other Albums.
118
12. Built-in Camera
Downloading Your Online Pictures/Videos
From the Xtra Online Gallery you can download the selected
picture(s) and video(s) to your phone’s In Phone folder or the
microSD card.
1. From the online pictures display, select the picture(s) and
video(s) you wish to download and press Options (right
softkey). (See “Managing Your Pictures/Videos From Your
Phone” on page 118.)
2. Select Save to.., and then select one of the following options
and press :
In Phone to download and save the pictures and videos to
the phone.
In microSD to download and save the pictures and videos
to the microSD card.
Accessing Online Picture/Video Options From
Your Phone
To access your online picture/video options from your phone:
1. Select a picture or video from your Online Albums.
(See “Managing Your Pictures/Videos From Your Phone” on
page 118.)
2. Press Options (right softkey) to display options.
3. Select an option from the following and press
:
Play to play the video.
Send to Contacts to send your picture or video.
Order Prints to order prints of the pictures. You can
choose whether to pick up your prints at a retail store or
have them mailed to you.
Note: The Order Prints service is currently not available.
Post to Services to access available services.
Select Update to display the latest services.
Note: The Post to Services service is currently not available.
Set as to assign the picture or video.
12. Built-in Camera
119
Save to.. to select In Phone or In microSD to download the
pictures and videos to the selected storage area.
Delete to erase pictures and videos saved in the current
album (or Uploads folder).
Copy/Move to copy or move pictures and videos to a
selected album.
Details/Edit to edit or display details relating to your
pictures or videos.
Media Filter to filter only pictures, only videos, or to
display all media files.
Album List to display the album list.
Note: The online picture and video options may vary depending on the
item you select.
To access your Online Albums options from your phone:
1. Display the album list in the Online Albums menu.
(See “Managing Your Pictures/Videos From Your Phone” on
page 118.)
2. Select an album (or Uploads folder) and press Options (right
softkey) to display options.
3. Select an option from the following and press
Delete Album to delete the selected album.
Rename Album to rename the selected album. Enter a
new name and press Save (left softkey).
Album Info to display detailed information about the
album.
Create New Album to create a new album. Enter a new
album name and press Save (left softkey).
Note: The Uploads folder cannot be erased or renamed.
120
:
Edit/Delete to select an option from the following:
12. Built-in Camera
Printing Pictures Directly FromYour Phone
Your phone is PictBridge compatible, allowing you to print
directly from your phone without connecting to a computer.
Simply connect your phone to a PictBridge-enabled printer and
enjoy printing your photos.
Note: Make sure your battery is fully charged before using the
PictBridge.
1. Select
> Pictures > PictBridge.
2. Connect your phone to the PictBridge-enabled printer by
using a USB cable (not included). (Wait until the connection is
completed.)
3. Set the printer settings using your navigation key:
Picture to Print: You can select the picture from the In
Phone folder or the microSD card. (You can select up to
99 pictures; however you can only select from one
folder.)
Note: You may not be able to print pictures that cannot be displayed on
your phone.
Layout: You can select the print mode from
Default Printer, Standard Print, Index Print, or DPOF Print. (If
you have selected DPOF Print, select Yes to print. To set up
the DPOF Print, see “Setting Up the Digital Print Order
Format” on page 95.)
Note: The Digital Print Order Format service is currently not available.
Number of Copies: You can set the number of copies
(1-10). (You cannot specify number of copies when
Index Print is selected.)
Print Size: You can set the print size from Default Printer,
4”x6”, 5”x7”, 8”x10”, or Letter. (Print sizes may vary
according to the type of printer you have.)
Date Stamp: You can imprint the date on your pictures.
Select Yes or No. (Date stamping may not be available
depending on the type of printer you have.)
12. Built-in Camera
121
4. When you are finished selecting the printer settings, press
Print (left softkey).
5. When printing is finished, press
.
6. Select Yes. Follow the instructions on the display to unplug
the USB cable from the phone.
Note: While you are connected to the printer, your phone’s screen will
display “Phone Off.” You cannot make or receive calls during this time.
PictBridge Error Messages: From time to time you may encounter
printing problems. Any printer error messages will be displayed on your
phone, informing you of the specific problems encountered. Please refer
to the user’s guide that came with your printer for descriptions,
explanations, and possible resolutions for any error messages.
122
12. Built-in Camera
13. Media Player
Your Multimedia Channel Options
Your phone offers a variety of accessible video channels,
depending on your Service Plan and multimedia subscriptions.
Your subscription options include a comprehensive basic
service as well as a full menu of a variety of additional channel
options.
Accessing Your Media Player’s Channel
Listings
It is easy to access and view the multimedia channel listings from
the phone’s main menu.
To access your media player and channel listings:
Select > Media Player > Channel Listing, and follow the
system prompts to proceed.
Playing a Video or Audio Clip inYour Phone
To select and play a media clip in the Media Listing:
1. Select
> Media Player > Media Listing.
2. Use your navigation key to select the clip that you would like
to play and press Select (left softkey) or . (The clip will
automatically load and begin playing.)
Tip: To change the volume of video or audio, press the Side Volume key
up or down.
13. Media Player
123
Media Folder Options
To access a media folder’s options, display the media folder and
press Options (right softkey). To select an option, highlight it and
press .
Media Listing to display the media file list under the media
folder.
Channel Listing to display the channel list.
Info to display the media clip information.
Play Mode to switch the play mode in the media folder.
Media Filter to sort audio and video clips in the media folder.
Player Settings to customise the player settings from Equalizer,
Display Size, or Skins.
Playlist to display a customised playlist you have created.
Add to Playlist to add a media clip to the playlist.
Send via Bluetooth to send media clips via Bluetooth.
Use Bluetooth to play media clips through a Bluetooth headset.
Help to see the Multimedia instruction page.
Exit to terminate the Media Player.
Note: The phone’s Media Player supports the following file extensions:
“mp3,” “aac,” “mp4,” “3gp,” “3gpp,” “3gp2,” “3g2,” “qcp,” “amr,”
“m4a,” “m4v,” “wma,” “wmv,” and “asf.”
124
13. Media Player
Playlists
You can create playlists to organise media files stored in your
phone.
To create a playlist:
1. Select
> Media Player > Playlist.
2. Highlight <New Playlist> and press
.
3. Enter a name for the new playlist and press
.
4. Select from the files that are available in the media folder and
press Done (left softkey). (The newly named playlist will be
displayed on the playlist.)
To add files to a playlist:
1. Select > Media Player > Playlist. (The available playlists on
your phone will be displayed.)
2. Select the playlist that you want to add files to and press
.
3. While in the playlist, press Options (right softkey) >
Add Media.
4. Select from the files that are available in the media folder and
press Done (left softkey).
– or –
1. Select > Media Player > Media Listing. (The available media
file list on your phone will be displayed.)
2. Select the file you want to add and press Options (right
softkey) > Add to Playlist.
3. Select an option and press
:
This to add the selected file.
Select to add multiple files. After selecting the files, press
Done (left softkey).
All to add all the files.
4. Select the playlist you want and press
.
13. Media Player
125
To remove files from a playlist:
1. Select
> Media Player > Playlist.
2. Select the playlist that you want to remove files from and
press .
3. Press Options (right softkey) > Remove.
4. Select an option and press :
This to remove the selected file.
Select to remove multiple files. After selecting the files,
press Done (left softkey).
All to remove all the files.
5. Select Yes and press
.
To delete a playlist:
1. Select
> Media Player > Playlist.
2. Select the playlist you want to delete and press Options (right
softkey) > Delete.
3. Select an option and press :
This to delete the selected file.
Select to delete one or more playlists. After selecting the
playlist(s), press Done (left softkey).
All to delete all playlists.
4. Select Yes and press
.
Options available under the playlist menu may include:
Media Listing to display the media file list under the media folder.
Channel Listing to display the channel list.
Info to display the playlist information.
Play Mode to switch the play mode in the playlist.
Rename to rename the playlist.
Delete to delete the playlist.
Player Settings to customise the player settings from Equalizer,
Display Size, or Skins.
Help to see the Multimedia instruction page.
Exit to terminate the Media Player.
Note: When you delete a playlist, or a file from a playlist, only the
reference to the data is deleted; the actual playlist or file is not deleted
from the phone’s memory.
126
13. Media Player
Multimedia FAQs
1. Will I know if I am receiving an incoming call while I am viewing or
listening to a clip?
No. Incoming calls will roll into voicemail while you are
playing a clip. If the caller leaves a voicemail, the voicemail
icon will appear on the screen.
2. Can I access a clip wherever I am, as long as I have my phone?
As long as you are on the home network, you will have access
to the video clips.
Note: Multimedia Service does not work where service is unavailable.
3. Are the videos that I am viewing “live” videos?
No. This service provides videos on demand. The video clips
are refreshed throughout the day, but they are not “live.”
4. What does it mean when the video pauses and I see the word
“loading” at the bottom of the screen?
This happens when the media player is in the process of
loading the data necessary to play the clip. It typically occurs
when there is heavy traffic on the network.
5. If I put on my stereo headset and insert it into the phone’s headset
jack, can I close the phone while I am playing a video clip without
interrupting the clip?
Yes. When you insert your stereo headset into the phone’s
headset jack, the phone automatically goes into “headset
mode,” allowing you to close the phone and continue playing
the clip (likewise, if your phone is in “headset mode,” a phone
call will not disconnect when you close the phone).
13. Media Player
127
14. Bluetooth
®
Using Bluetooth
Bluetooth is a short-range communications technology that
allows you to connect wirelessly to a number of Bluetooth
devices, such as headsets, hands-free car kits, and Bluetoothenabled handhelds, PCs, and mobile phones. The Bluetooth
communication range is usually up to approximately 10 meters
(30 feet).
Turning Bluetooth On and Off
By default, your phone’s Bluetooth feature is turned off. Turning
Bluetooth on makes your phone “available” to other in-range
Bluetooth devices. To make your phone visible to other devices,
you must also set your phone’s visibility to other than Hidden.
(See page 129.)
1. Select
> Settings > Bluetooth > On/Off.
2. Select On to enable Bluetooth. Select Off to disable Bluetooth.
Note: Enabling the Bluetooth settings affects the phone’s talk and
standby times.
Bluetooth Status Indicators
The following icons show your Bluetooth connection status at a
glance:
– indicates the Bluetooth feature is active. It turns to green
when connected to a Bluetooth device.
– indicates your phone is discoverable by another Bluetooth
device.
– indicates your phone is communicating with a Bluetooth
device.
– indicates the handset is connected to/communicating
with a Bluetooth device via Hands-free Profile (HFP).
– indicates the handset is connected to/communicating
with a Bluetooth device via Advanced Audio Distribution
Profile (A2DP).
– indicates the handset is connected to/communicating
with a Bluetooth device via both Hands-free Profile (HFP)
and Advanced Audio Distribution Profile (A2DP).
128
14. Bluetooth
Using the Bluetooth Settings Menu
The Bluetooth Settings menu allows you to set up many of the
characteristics of your phone’s Bluetooth service, including:
Setting your phone’s visibility (or “discoverability”) for other
Bluetooth devices
Choosing a device for your Bluetooth calls
Entering or changing the name your phone uses for Bluetooth
communication
Displaying your phone’s Bluetooth device information
Setting the storage area for files received via Bluetooth
Bluetooth Settings:Trusted Devices
To display a list of trusted Bluetooth devices:
Select
> Settings > Bluetooth > Trusted Devices.
Bluetooth Settings:Visibility
The Visibility menu allows you to manage your phone’s
availability to other Bluetooth devices.
To configure your phone’s visibility (discoverability) to other
Bluetooth devices:
1. Select
> Settings > Bluetooth > Visibility.
2. Select a Visibility setting and press :
Always Visible to allow other Bluetooth devices to detect
and identify your phone.
Visible for 3 min. to allow other Bluetooth devices to detect
your phone for three minutes, after which it returns to
hidden mode.
Hidden to prevent other Bluetooth devices from
detecting and identifying your phone.
Note: It is recommended that your phone is in standby mode when
receiving data from other devices via Bluetooth.
14. Bluetooth
129
Bluetooth Settings:Voice Priority
The Voice Priority menu allows you to choose the default device
you want to use for incoming and outgoing calls.
To set the voice priority:
1. Select
> Settings > Bluetooth > Voice Priority.
2. Select Phone or Hands-free:
Phone to allow either your phone or hands-free devices to
be used according to the device used to answer the
incoming call.
Hands-free to allow only hands-free devices to be used.
Bluetooth Settings: Device Name
The Device Name menu allows you to select a Bluetooth name
for your phone. Your phone’s Bluetooth name will appear to
other in-range Bluetooth devices, depending on your Visibility
settings.
To set a Bluetooth name for your phone:
1. Select
> Settings > Bluetooth > Device Name.
2. Press and hold
to clear the current name.
3. Use your keypad to enter a new name and press
Bluetooth Settings: Device Information
To display your phone’s device Information:
130
Select
> Settings > Bluetooth > Device Info.
14. Bluetooth
.
Bluetooth Settings: Exchange Folder
The Exchange Folder menu allows you to set the storage area for
files received from the other Bluetooth device.
To change the storage area:
1. Select
> Settings > Bluetooth > Exchange Folder.
2. Select In Phone, In microSD, or Switch w/Card:
In Phone to save received data to your phone.
In microSD to save received data to the microSD card.
Switch w/Card to save received data to the microSD card
when the card is inserted. If a microSD card is not
present, the storage location will automatically be
switched to your phone.
Setting Auto-Accept
You can configure your phone’s accessibility to other Bluetooth
devices.
To configure your phone’s accessibility to other Bluetooth
devices:
1. Select
> Tools > Bluetooth.
2. Highlight the device from the trusted devices list and press
Options (right softkey) > Auto-Accept.
3. Select a setting and press
:
On to allow other Bluetooth devices to initiate a
connection without any confirmation.
Off to display a confirmation screen, from which you can
accept or deny the connection.
14. Bluetooth
131
Bluetooth Profiles
All the Bluetooth settings you configure are stored in your
phone’s Bluetooth user profile. Different profiles can be used for
specific Bluetooth functions.
Headset Profile – This profile functions as a mobile ear jack.
When an incoming call is received, the ringer can be heard
through the headset. While using your phone, you can use the
headset instead of the phone by pushing a button on the
headset, which has the same effect as inserting a jack into the
phone. Increase or decrease the volume by using the Side
Volume key on the side of the phone.
Hands-Free Profile – This profile functions as a mobile car kit.
Incoming calls ring to the hands-free headset or device. Calls
can be received by pressing a button on the headset or device.
For dialling, four functions are supported: recent call dial,
voice dial, speed dial, and number dial. Increase or decrease
the volume by using the Side Volume key.
OPP: Object Push Profile – This profile uses the Generic Object
Exchange profile services to send data objects between devices
and can be used to exchange objects like music files, voice data,
pictures, videos, calendar (vCal) and business cards (vCard).
FTP: File Transfer Profile – This profile allows you to transfer
files to or from other Bluetooth-enabled devices.
BPP: Basic Printing Profile – This profile enables simpler
printing from your phone to a Bluetooth-enabled printer.
A2DP: Advanced Audio Distribution Profile – This profile allows
you to transmit high quality stereo music from your phone to
other compatible accessories including Bluetooth stereo
headsets.
Note: The A2DP profile supports the following file extensions:
aac, m4a, mp3, mp4, 3gp, 3gpp, 3g2, 3gp2, mid, wma, midi, pmd. This may
not be applicable to some data. Streaming movie media is not supported.
132
AVRCP: Audio/Video Remote Control Profile – This profile enables
your phone to remotely control compatible accessories
including Bluetooth stereo headsets. You can play, pause,
stop, forward, reverse, fast forward, or rewind from a headset.
(Playback functions may vary among Bluetooth accessories.)
14. Bluetooth
PBAP: Phone Book Access Profile – This profile enables
exchange of Contacts information between devices. It is likely
to be used between a car kit and a mobile phone to allow the
car kit to display the name of the incoming caller.
Note: Above mentioned devices (such as headset) are optional and are
not included with your phone.
Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish a trusted
connection between your phone and another Bluetooth device.
When devices are paired, a passcode (PIN Code) is shared
between devices, allowing for fast, secure connections while
bypassing the discovery and authentication process.
To pair your phone with another Bluetooth device:
1. Select > Tools > Bluetooth > <Add New> > Search. (Your phone
will display a list of discovered in-range Bluetooth devices.)
2. Select the device you wish to pair with and press
.
3. Select Add to Trusted.
4. Enter the passcode and press . (When the owner of the
other device accepts connection and enters the same code,
the pairing is complete.)
Waiting for Request
Waiting for Request helps to ensure the above pairing process
when it does not go smoothly.
To allow your phone to be paired with another Bluetooth device:
1. Select
> Tools > Bluetooth > <Add New> > Wait for Request.
2. Follow the onscreen prompts to enter your passcode and
press .
14. Bluetooth
133
Using the Trusted Devices Options
Once you have created paired devices, several options are
available from the trusted devices list.
1. From the trusted devices list, highlight a device.
2. Press Options (right softkey) to display the following options:
134
Connect or Disconnect to connect to or disconnect from
the Bluetooth device (if applicable).
Send Item to send an item saved on your phone to another
Bluetooth device (if applicable).
Browse to browse and transfer files between Bluetooth
devices using FTP.
Print to print the data using Basic Printing Profile or
Object Push Profile (if applicable).
Edit Name to edit the name of the trusted device.
Auto-Accept to configure your phone’s accessibility to
other Bluetooth devices. (See page 131.)
Device Info to display the trusted device’s information.
Sort by to sort the trusted devices.
Delete to delete the selected device from the list.
Delete All to delete all devices from the list.
Settings to display the Bluetooth settings menu.
(See page 129.)
14. Bluetooth
Printing Data via Bluetooth
You can print out your pictures, Contacts entries, business card,
calendar event, and messages stored on the phone. (Some
Bluetooth-enabled printers may not support this feature.)
1. Select
> Tools > Bluetooth.
2. Highlight the device from the trusted devices list and press
Options (right softkey) > Print.
3. Select a category (Picture, Business Card, Contacts,
Calendar Event,or Message) and press .
4. Follow the onscreen instructions to select the item(s) to print.
5. Select Create Print Job, Handset Default, or Printer Default:
Create Print Job to print items by creating a print job via
the Basic Printing Profile.
Handset Default to print items by creating a print job via
the Basic Printing Profile.
Printer Default to print items using the default printer
settings via the Object Push Profile.
Note: The Printer Settings display will appear if you have selected
Picture in step 3 above and Create Print Job in step 5 above. Press
Done (left softkey) after completing the settings.
6. Make sure the printer is ready to print data, and press Print
(left softkey).
7. If necessary,enter the passcode and press
.
Note: Before you start using the Bluetooth feature, make sure your
phone’s battery is fully charged.
14. Bluetooth
135
Sending Data via Bluetooth
You can send data saved on your phone to another Bluetooth
device.
1. Select
> Tools > Bluetooth.
2. Highlight the device from the trusted devices list and press
Options (right softkey) > Send Item.
3. Select your desired item (Business Card, Contacts,
Calendar Event, or From File Manager) and press .
4. Follow the onscreen instructions to select the item(s) to send.
5. Make sure the other device is ready to receive data, and then
press Send (left softkey).
6. If necessary, enter the passcode and press
.
Note: Due to different specifications and features of other Bluetoothcompatible devices, display and operations may be different, and
functions such as transfer or exchange may not be possible with all
Bluetooth-compatible devices.
136
14. Bluetooth
15. Service Features
Using Voicemail
All unanswered calls to your phone are automatically transferred
to your voicemail, even if your phone is in use or turned off.
Voicemail Notification
There are several ways your phone alerts you to a new message:
By displaying a message on the screen.
By playing the assigned ringer.
By blinking the LED in red.
By displaying
at the top of your screen.
New Voicemail Message Alerts
When you receive a new voice message, your phone alerts you
and prompts you to call your voicemail.
To call your voicemail:
Press
.
To display your missed log:
Select
> Missed Alerts.
Displaying Voicemail Details
Select
> Messaging > Voicemail > Details.
Retrieving Your Voicemail Messages
Press and hold
box.)
. (Your phone will dial your voicemail
15. Service Features
137
Clearing the Message Icon
> Messaging > Voicemail > Clear Count > Yes.
Select
Editing Your Voicemail Number
When you are roaming outside of the home network, you may
need to change the number you dial to access your voicemail
box.
To change the number:
1. Select
> Messaging > Voicemail > Edit Voicemail#.
2. Edit your voicemail number and press
.
To reset your voicemail number:
1. Select
> Messaging > Voicemail > Edit Voicemail#.
2. Press Options (right softkey) > Reset Voicemail# > Yes.
3. Press
.
Responding to Call Waiting
When you are on a call, Call Waiting alerts you to incoming calls
by sounding beeps. Your phone’s screen informs you that
another call is coming in and displays the caller’s phone number
(if available).
To respond to an incoming call while you are on a call:
Press
. This puts the first caller on hold and answers the
second call.
To switch back to the first caller:
Press
again.
Note: Call Waiting is a network service. Please call
subscribe.
138
15. Service Features
Shift
to
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the same
time. When using this feature, the normal airtime rates will be
charged for each of the two calls.
1. Enter a number you wish to call and press
or
2. Once you have established the connection, press
the first caller on hold.
.
to put
3. Enter the second number you wish to call and press
4. When you are connected to the second party, press
then press
again to begin your Three-Way Call.
.
, and
Tip: You can also begin a Three-Way Call by displaying a phone number
stored in your Call History, Contacts, or Messaging. To call the third
party, press Options (right softkey) during step 3 above.
Note: Three-Way Call is a network service. Please call
Shift
to subscribe.
Accessing Mobile Chatrooms
To access a chatroom from the browser:
Select > Messaging > Chat. (The browser will launch and
take you to the Chat menu.)
Web
With Web access on your phone, you will be able to browse
full-colour graphic versions – not just text versions – of your
favourite website, making it easier than ever to stay informed
while on the go. Check sports scores, trade stocks, and shop all
on your phone anywhere on the home network.
Launching the Web
Select
> Web.
15. Service Features
139
Net Guard
When Net Guard is enabled, a message will appear to confirm
that you want to connect to the Web. This feature helps you
avoid accidental connections. You can disable Net Guard in the
future by selecting Always Auto-Connect when Net Guard is
displayed.
Select > Settings > More... > Internet > Net Guard and choose
an option:
On to enable Net Guard.
Off to disable Net Guard.
Note: When enabled, Net Guard appears only once per session. Net
Guard does not appear if the phone is merely re-connecting due to a
time-out.
Browsing the Web
Creating a Bookmark
Bookmarks allow you to store the address of your favourite
websites for easy access at a later time.
1. Launch the Web page you want to mark.
2. Press the right softkey to go to the browser menu.
3. Select Mark this page.
4. Press Save (left softkey).
Note: Bookmarking a page does not store the page contents, just its
address.
Some pages cannot be bookmarked. Whether a particular Web
page may be marked is controlled by its creator.
Accessing a Bookmark
1. Launch the Web and press the right softkey to access the
browser menu.
2. Select View Bookmarks.
3. Highlight the bookmark you wish to access and press OK (left
softkey).
140
15. Service Features
Editing a Bookmark
1. Launch the Web and press the right softkey to access the
browser menu.
2. Select View Bookmarks.
3. Highlight the bookmark you wish to edit and press the right
softkey.
4. Select Edit.
5. Edit the address or title, and press OK (left softkey).
6. Press Save (left softkey).
Deleting a Bookmark
1. Launch the Web and press the right softkey to access the
browser menu.
2. Select View Bookmarks.
3. Highlight the bookmark you wish to erase and press the right
softkey.
4. Select Delete > Yes (right softkey).
Going to a Specific Website
1. Launch the Web and press the right softkey to display the
browser menu.
2. Select Go to URL... > Input Address.
3. Enter the URL of the website you wish to go to, and press OK
(left softkey).
Note: Not all websites are viewable on your phone.
Reloading a Web Page
1. Launch the Web and press the right softkey to display the
browser menu.
2. Select Refresh this page.
15. Service Features
141
Restarting the Web Browser
If the Web browser appears to be malfunctioning or stops
responding, you can usually fix the problem by simply restarting
the browser.
1. Launch the Web and press the right softkey to display the
browser menu.
2. Select More... > Restart Browser.
Sending a Web Page
This feature allows you to send a URL (Web site address) you are
viewing through text messaging.
1. Launch the Web and press the right softkey to display the
browser menu.
2. Select Send Page.
3. To complete and send a Web Page, follow steps 2-7 in
“Sending a Text Message” on page 100.
Adjusting the Browser Sound Volume
1. Launch the Web and press the right softkey to display the
browser menu.
2. Select More... > Preferences > Sound Volume.
3. Select your desired volume level by pressing the navigation
key and press .
Email
Accessing Email Messages
1. Select > Messaging > Go to Email. (The browser will launch
and take you to the email menu.)
2. Follow the system prompts to proceed.
142
15. Service Features
Getting to KnowTelecom Mobile Broadband
Mobile Broadband is Telecom’s amazing new 3G mobile
network - bringing you the next generation of mobile services
and putting the world of information and entertainment in the
palm of your hands. With Mobile Broadband, you will be able to
experience speeds you never thought possible. Your phone is
equipped with the latest in multimedia, imaging and processing
technology and offers exclusive services such as access to the
Telecom Music Store.
Note: Your phone’s data services work on the nationwide phone will
offer Telecom Mobile Broadband data services in areas with high speed
data (EVDO) coverage. Go to www.telecom.co.nz/mobilebroadband for
coverage details and more information.
Enabling Telecom Mobile Broadband
Since Telecom Mobile Broadband is an enhancement to your
phone’s Internet capabilities, you do not need to take any extra
action to make Telecom Mobile Broadband available. As long as
your phone’s Internet setting is enabled (see “Enabling and
Disabling Internet Services” on page 54), your phone is ready to
access Telecom Mobile Broadband services where available.
When your phone has a Telecom Mobile Broadband connection,
the status indicator will display on the screen. (For details,
see “Viewing the Display Screen” on page 9.)
Exploring the Telecom Music Store
Your Telecom Mobile Broadband service allows you to access
the Telecom Music Store, an online music distribution site that
lets you purchase and download digital music files to play on
your Telecom Mobile Broadband Multimedia Phone.
Note: For further information on Telecom Mobile services, please visit
www.telecom.co.nz/mobile or call *123.
Accessing the Telecom Music Store
1. Select
> Music.
2. Follow the onscreen instructions.
15. Service Features
143
16. Warranty Information
Warranty
LIMITED WARRANTY
SANYO provides this Limited Warranty for your mobile phone
and original accessories delivered with your mobile phone
(hereinafter referred to as “Product”). Should your Product need
warranty service, please return it to the dealer from whom it
was purchased, or contact Telegistics Repair Limited.
OUR WARRANTY
Subject to the conditions of this Limited Warranty, SANYO
warrants this Product to be free from defects in design, material,
and workmanship at the time of its original purchase by a
consumer, and for a subsequent period of 12 months after
purchase.
WHAT WE WILL DO
If, during the warranty period, this Product fails to operate
under normal use and service, due to defects in design,
materials, or workmanship, SANYO authorised distributors
(Telecom NZ distribution channel) or Telegistics Repair Limited
in NZ where you purchased the Product, will, at their option,
either repair or replace the Product in accordance with the
terms and conditions stipulated herein.
SANYO and/or Telegistics Repair Limited reserve the right to
charge a handling fee if a returned Product is found not to be
under warranty according to the conditions below.
CONDITIONS
1. The warranty is valid only if the original proof of purchase
issued to the original purchaser by the dealer, specifying the
date of purchase and serial number*, is presented with the
Product to be repaired or replaced. SANYO reserves the right
to refuse warranty service if this information has been
removed or changed after the original purchase of the
Product from the dealer.
144
16. Warranty Information
2. If SANYO repairs or replaces the Product, the repaired or
replaced Product shall be warranted for the remaining time of
the original warranty period or for ninety (90) days from the
date of repair, whichever is longer. Repair or replacement may
involve the use of functionally equivalent reconditioned units.
Replaced parts or components will become the property of
SANYO.
3. This warranty does not cover any failure of the Product due to
liquid or impact damage, or due to misuse, including but not
limited to use in other than the normal and customary
manner, in accordance with the SANYO instructions for use
and maintenance of the Product. Nor does this warranty
cover any failure of the Product due to accident, modification
or adjustment, or acts of God.
4. Since the mobile system on which the Product is to operate is
provided by a carrier independent from SANYO, SANYO will
not be responsible for the operation, availability, coverage,
services, or range of that system.
5. This warranty does not cover Product failures caused by
installations, modifications, or repair or opening of the
product performed by non SANYO authorised personnel.
6. The warranty does not cover Product failures which have
been caused by use of accessories or other peripheral devices
which are not SANYO branded original accessories intended
for use with the Product.
7. Tampering with any of the seals on the Product will void the
warranty.
8. THERE ARE NO EXPRESS WARRANTIES, WHETHER
WRITTEN OR ORAL,OTHER THAN THIS PRINTED LIMITED
WARRANTY. ALL IMPLIED WARRANTIES INCLUDING, AND
WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL SANYO OR ITS
LICENSORS BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY NATURE
WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST
PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT
THOSE DAMAGES CAN BE DISCLAIMED BY LAW.
16. Warranty Information
145
Some countries/states do not allow the exclusion or limitation of
incidental or consequential damages, or limitation of the
duration of implied warranties, so the preceding limitations or
exclusions may not apply to you.
The warranty provided does not affect the consumer’s statutory
rights under applicable legislation in force, nor the consumer’s
rights against the dealer arising from their sales/ purchase
contract.
*In some countries/regions additional information is requested.
If so, this is clearly shown on the valid proof of purchase.
microSDHC Logo is a trademark.
This product contains NetFront Browser of ACCESS CO., LTD. ACCESS and NetFront are trademarks or
registered trademarks of ACCESS CO., LTD. in Japan and other countries. This software is based in part
on the work of the Independent JPEG Group.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
SANYO is under license. Other trademarks and trade names are those of their respective owners.
146
16. Warranty Information
Index
A
Airplane Mode 44
Alarm Clock 73
Alert Notification 35
Animation 37
Answering Calls 18
Audio Quality 86
Auto Answer 46
B
Background 37
Backlight 36
Battery 13
Bluetooth 128
Bookmarks 140
C
Calculator 75
Calendar 38, 65
Call Alarm 67
Call Answer 46
Call History 55
Call Memo 83
Call Waiting 138
Callback Number 43
Camcorder 110
Camera 103
Chat 139
Contacts 58
Contacts Match 24, 47
Countdown Timer 74
D
Dialling Options 17
Display Screen Icons 9
Display Settings 36
E
Email 142
Emergency Numbers 20
Entering Text 25
F
File Manager 76
H
Headset Mode 47
I
Icon Definition 78
In-Call Options 21
Internet 54
L
Location Settings 41
Lock Code 49
Lock Mode 50
Locking Your Phone 49
Lost or Stolen Phones 54
M
Making Calls 16
Mass Storage 98
Media Player 123
Menu Diagram 30
Menu Style 36
Message Notification Display 42
Messaging 42, 99
microSD Card 89
Missed Call Notification 19
Music 143
My Content
Accessing Menus 79
Erasing 81
My Favourites 45
N
Net Guard 140
Index
147
P
U
Picture Message 99, 102, 116
Phone (illus.) 6
Phone Number
Dialling With Pauses 23
Displaying 15
Finding 23
Saving 22, 56
PictBridge 121
Power Save Mode 37
Preset Messages 29, 42
Unlocking Your Phone 49
R
Recording Mode 86
Resetting Your Phone 53
Restricting Calls 51
Ringer Types 32
S
Safety 2
Screen Call 87
Screen Saver 38
Security Menu 49
Setup Options 45
Side Key Guard 48
Silence All 35
Sleep Mode 40
Sound Settings 32
Special Numbers 51
Speed Dialling 24, 60, 62
Stopwatch 74
T
T9 Text Input 26
Text Message 99, 102
Three-Way Call 139
To Do List 68
Tone Length 34
TTY 44
Turning Your Phone On and Off 12
148
Index
V
Vibrate Type 34
Voice-Activated Dialling 82
Voice Dial Tags 82
Voice Memo 83
Voicemail 137
Volume Settings 33
W
Warranty 144
Web 139
World Clock 75
X
Xtra Online Gallery 118
Notes
Download PDF

advertising