STOP

PARE

Missing A Part?

CALL US BEFORE GOING

BACK TO THE STORE!

The store where you made your purchase does not stock parts for this item.

If you have assembly questions or if you need parts, whether they are missing or damaged

Call Toll-Free Help Line or visit www.swingsetsonline.com

" # # $ #

!

%

& ' (

" ) *

1-800-765-4138

PLEASE READ THIS BEFORE STARTING ASSEMBLY

•

•

+

2

2

0

-

+

- . + 3

/

2

0

•

0

•

2 - . / 6 2

.

+ 0

•

2 - . + 3 0 ,

!

+ 0

, .

/ 0 -1 0 0 /

!

+

+

20

2 + 0

, .

1 - . 4 , ,

, 2 + 0 !

5 .

+

1 /+ /5 + 0 /5

- . + 3

4 + +

3

, -

777! 7 "

2 - 0

!

!

!

/

+

2 - .

2 + 0

0

0

0 2

!

- + 3 2

1 0

0

/ +

•

•

•

•

•

0

0

0.;

2 / .

0

.

2

<. + =

, 8 / 0

/ 9 ,

.

2 <.

, 8 .

0 > 0

0.

/

0 > 0 <. ?

0.

0 , /

-.

+ ,

3

.

1 0

!

, 8 1 0

8.

!

/ 0 , <.

0 > 1 3

/ = = .

, 8 .

0 > 2

777! 7 "

3= !

!

!

0 /

0

/

/ 9

/

/

-.

0 2

0

0 <. !

0 , <.

?

1

8 :

=

.

/

PLEASE HAVE THE FOLLOWING INFORMATION WHEN YOU MAKE YOUR CALL:

1 – MODEL NUMBER OF THE PRODUCT LOCATED ON THE FRONT OF THE ASSEMBLY MANUAL

2 – DESRIPTION OF THE PART FROM THE PARTS LIST

POR FAVOR TENGA VISIBLE LA SIGUIENTE INFORMACIÓN CUANDO LLAME:

1 - NÚMERO DE MODELO DEL PRODUCTO QUE SE ENCUENTRA UBICADO AL FRENTE DEL MANUAL

DE ENSAMBLAJE

2 - DESCRIPCIÓN DE LA PIEZA QUE SE ENCUENTRA EN LA LISTA DE PIEZAS

!

Owner’s Manual Play Set

Dear Customer:

Please read entire booklet completely before beginning the assembly process.

Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use.

The Company does not warranty any of its residential structures subjected to commercial use such as:

Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.

WARNING: This Symbol points out important safety instructions which, if not followed, could endanger the personal safety of yourself and your children and/or damage your property. You MUST read and follow all instructions in this manual before attempting to use this playcenter.

WARNING: Children must NOT use this playcenter until unit has been completely assembled

and inspected by an adult to insure set has been properly installed and anchored.

Please follow all recommendations below. Failure to do so may result in the warranty being void and/or safety

violations that could result in serious injury. This manual contains helpful information concerning Assembly

Preparation, Installation Procedure, and Required Maintenance. Always keep the safety of your children in mind as your play structure is being built and as your children play on the set. Before your children play on the set please review the Operation Instructions with them to help ensure their safety

.

PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THEM IN A SAFE PLACE WHERE YOU CAN

REFER TO THEM AS NEEDED. IN ORDER TO PROVIDE YOU WITH THE MOST EFFICIENT SERVICE, IT IS REQUIRED THAT

YOU PROVIDE US WITH THE PART NUMBERS WHEN ORDERING PARTS.

For Your Records:

Please take time and fill out the information below. This information will be needed for warranty issues.

Where Purchased: ____________________

Date of Purchase: ____________________

Installation Date: _____________________

Installed by: _________________________

Staple Receipt Here

Tracking Number Reference Label

Remove label sticker from each carton and stick on the back side of ID plate. In the event of warranty claim this will help identify your unit.

Rev5/20/10 BRS

Owner’s Manual Play Set

Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height

Positioning Your Playcenter

1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult

helper. Place in a flat area of your yard to minimize ground preparation.

2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains.

3. Place the equipment not less than 6 ft from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.

4. Provide enough room so that the children can use the equipment safely. For example, for structures with multiple play activities, a slide should not exit in front of a swing.

5. It is a good idea to place your Playcenter in an area that is convenient for adults to watch children at play.

6. Create a site free of obstacles that could cause injuries – such as low overhanging tree branches, overhead wires, tree stumps and/or roots, large rocks, bricks and concrete.

Additional suggestions in the Suggested Playground Surfacing Section.

7. Do not build your playset on top of surfacing material.

8. Locate bare metal platforms and slides out of direct sunlight to reduce the likelihood of serious burns. A slide that faces north will receive the least direct sunlight.

9. Separate active and quiet activities from each other. For example, locate sandboxes away from swings or use a guardrail or barrier to separate the sandbox from the movement of the swings.

Suggested Playground Surfacing

Playground equipment should never be placed on hard surfaces such as concrete or asphalt.

Do not install loose fill surfacing over hard surfaces such as concrete or asphalt.

Shredded bark mulch, wood chips, fine sand and fine gravel, are added as shock absorbing materials after assembly. If used properly these materials can absorb some of the impact of a child’s fall.

All surface material should extend a minimum of 6 feet in all directions around the play area.

Do not apply playground surfacing until after the unit is completely constructed. Playset should not be built on top of surfacing.

Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging.

Installations of rubber tiles or poured-in-place surfaces (other than loose-fill materials) generally require a professional and are not “do-it-yourself” projects.

Shall use Playground Surfacing Materials (other than loose-fill material) which comply with the safety standard ASTM F1292 Standard Specification of Impact Attenuation of Surfacing

Materials within the Use Zone of Playground Equipment.

Rev5/20/10 BRS

Owner’s Manual Play Set

The following chart explains the fall height in feet from which a life threatening head injury would not be expected

Critical Heights in feet (m) of Tested Materials

Material

Wood Chips

Double-Shredded bark mulch

Engineered Wood Fibers

Fine Sand

Coarse Sand

Fine Gravel

Medium Gravel

Shredded Tires*

Uncompressed Depth

6" (152mm)

7' (2.13m)

6' (1.83m)

6' (1.83m)

5' (1.52m)

5' (1.52m)

5' (1.52m)

5' (1.52m)

10-12' (3.0-3.6m)

9" (228mm)

10' (3.05m) 11' (3.35m)

10' (3.05m) 11' (3.35m)

7' (2.13m) >12' (3.66m)

5' (1.52m) 9' (2.74m)

5' (1.52m)

7' (2.13m)

5' (1.52m)

N/A

12" (304mm)

6' (1.83m)

10' (3.05m)

6' (1.83m)

N/A

Compressed Depth to 9" (228mm)

10' (3.05m)

7' (2.13m)

6' (1.83m)

5' (1.52m)

4' (1.22m)

6' (1.83m)

5' (1.52m)

N/A

!

"

#$ % & '

Operating Instructions:

NOTE: Your children’s safety is our #1 concern. Observing the following statements and warnings reduces the likelihood of serious or fatal injury. Please review these safety rules regularly with your children.

1. This Playcenter is designed for specific number of occupants whose combined weight should

not exceed a designated weight on the elevated floor or the swing area, the total Unit capacity is outlined in the Basic Setup Dimensions section of instruction manual. The maximum fall height and recommended play area is also available in the Basic Setup Dimensions section of the manual for the specific unit.

2. On-site adult supervision is required.

3. Instruct children not to walk close to, in front of, behind, or between moving swings or other moving playground equipment.

4. Instruct children to sit in and never stand on swings

5. Instruct children not to twist the chains and ropes and not to loop them over the top support bar, since this may reduce the strength of the chain or rope.

6. Instruct children not to jump from swings or other playground equipment in motion.

7. Instruct children to not to push empty seats. The seat may hit them and cause serious injury.

8. Instruct and teach children to sit in the center of the swings with their full weight on the seats.

9. Instruct children not to use the equipment in a manner other than intended.

10. Instruct children to always go down slides feet first. Never slide head first.

11. Instruct children to look before they slide to make sure no one is at the bottom.

12. Instruct children to never run up a slide, as this increases their chances of falling.

13. The parents should have the children dress appropriately with well-fitting shoes. Loose clothing such as scarves and ponchos should not be worn. Always take off, tie up or tuck in cords and drawstrings on children’s clothing. These things can get caught on playground equipment and strangle a child.

14. Instruct children not to climb when the equipment is wet.

15. Instruct children to never jump from a fort deck. They should always use the ladder, ramp or slide.

16. Instruct children to never crawl or walk across the top of monkey bars.

Rev5/20/10 BRS

Owner’s Manual Play Set

17. Instruct children to never crawl on top of a fort roof.

18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it.

19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard.

20. Instruct children to never wrap their legs around swing chain.

21. Instruct children to never slide down the swing chain.

22. Instruct children to remove their bike or other sports helmet before playing on playground equipment.

Maintenance Instructions:

1. Check all nuts and bolts twice monthly during the usage season and tighten as required. (But not so tight that you crack the wood) We recommend you check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season.

2. Remove plastic swing seats and take indoors or do not use when the temperature drops below

32

°

F.

3. Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold season.

4. Oil all metallic moving parts monthly during the usage period.

5. Check all coverings for bolts and sharp edges twice monthly during usage season to be certain they are in place. Replace when necessary. It is especially important to do this at the beginning of each new season.

6. Check swing seats, ropes, cables and chains monthly during usage season for evidence of deterioration. Replacement should be made of any swing seat that has developed cracks in the plastic seats or has exposed metal in the edges of the swing seat. If there are already exposed metal inserts on the edge of the seat, immediately remove the seats and chains to prevent serious injury. Ropes, cables and chains should be removed and replaced if excessive wear is found.

7. For rusted areas on metallic members such as monkey bars, hand supports, brackets, etc.

Sand and repaint, using a non lead-based paint meeting the requirements of Title 16 CRF Part

1303.

8. Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sanding may be necessary to maintain a safe playing environment. If you are treating your Playcenter with stain regularly, it will help prevent severe checking/splitting and other weather damage.

9. We have applied a waterborne transparent stain to your unit. This is done for color only. Once or twice a year, depending on your climate conditions, you must apply some type of protection

(sealant) to the wood of your unit. Prior to the application of sealant, lightly sand any “rough” spots on your set. Please note this is a requirement of your warranty.

10. Creating and maintaining the Playcenter on a level location is very important. As your children play, your Playcenter will slowly dig its way into the soil, and it is very important that it settles evenly. Make sure the play set is level and true once each year or at the beginning of each play season.

11. Rake and check depth of loose fill protective surfacing materials to prevent compaction and to maintain appropriate depth. Replace as necessary (once a month during play season).

Rev5/20/10 BRS

Owner’s Manual Play Set

Disposal Instructions:

When the Playcenter use is no longer desired, it should be disassembled and disposed of in such a way that no unreasonable hazards will exist at the time the unit is discarded.

Third Party Assembly:

Customer may, in their sole discretion, elect to use a third party person or service to assemble this product. Backyard Discovery assumes no responsibility or liability for any charge incurred by the

Customer for any assembly services’.

Please see our warranty for more information about damaged and missing part replacement coverage. Backyard Discovery will not reimburse Customer for the price of parts purchased.

Rev5/20/10 BRS

Owner’s Manual Play Set

APPENDIX A

Information on Playground Surfacing Materials:

The following information is from the United States Consumer Product Safety Commission’s

Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html.

-

-#" & 1 & -"& . $

!" #$ "%

$#-- " "

& 2 -2& . " & #3# ,#"" " " ) #

.

$#"#-+ ,# "&! -# -% 4 " & 1 % & " "

. "

#

& & '

$#! #

"

$#!

$#!" & " & & . " & 1 %0!# & . , " "&#- $ # $#-" &

&

( "& #" " #" #) " **+*** ,-#%.

" #" # #--% &

$ #-- ,-#%.

# #

-$ 2&

& 1 &

,-#%.

" " #" # $#--

,&"#.

!%

+ # #2 "

" #

/ &,

!50#)

/ &,

, "

)& .

"0

1 &

"&#- " )

" !# ) # #1

$#! &

-&5 -% " !#

# $#!

#

! # !

& & 1 % " # # $#--

! "

" # #

# , #-" # 4 &- . #

$#!

-#%.

/ &, "

#% #,, # " ) #!! ,"#)- &"

- 2

#% / &!5-% "

) ,-#!

" #

,#!5 # " & # #

#!! ,"#)-

/ &, "

!5 #)

$ &. " #$$&!

)& .

$#!

4

)# 5 -! + 4 ! &, + $& # $& . #2 - # !

& " )

& "#-- # #& "#& #" # $$&!& " ," # # ,-#%.

&

&

6 #)-& " "

& 1 % & # $#-" $ &$$

4 2 + &"

#7&

" -

&. " $ 4 &! # ! &- 4 - " ) 7, !" "

0$&-$#!& .

#" &#- &$ " % # & "#-- # #& "#& #" ,"

- ) ! . &3 " #" #-- & 1 & " $#-- !# " ) , 2 "

"#& # -&$ 0" #" & .

#

#"" 4 #"

$ 8+ 9+ # 6

$#!& .

#" &#-

" & !

, & " $ "#"&

" #" #

# % / &,

"&

!5 #) )& .

#" &#-

" ! # !-& ) # -&

2& . 4& .+ "

" &. " $ "

!5 #) )& .

,&2 " , & " #

#" &#-

$

- 7"

- 7"

& "

# , & " & !"-% )

$

#

" #

#" "

& &

4 2 + ) !#

#

,&2 "

$ 8 $" & #-- & !"&

! &-

$ # 4& . #

"

& &

$

#% -&) #" -% 1

& "# !

,, "& . " !"

"

, $

$ 6

#

: & & $ #"& & & " " # & " & !

,# & . "

,# "&! -# #" &#- & !

2 # "

-#"&2

4 2 + #!

!50#)

#" &#- &

)& . , , "&

-% $$ !"&2 4

$ 2# & #" &#-

, , -% #& "#&

#" &#-

/ &, "

- ) !

!

&!

!5 , & &!#--% #

$ # #" &#- ,

#" &#- & % # #+ # &" !

"

,-

"

& "

"%, #

#& "#& !

&. " $ "

!" ," # "

,-#%.

/ &,

&

"+ "

!

# % $ %

#2#&-#)&-&"% $ "

$ #"&

& & $ #"& # )

& = # ; # ) 5 $

# , "!# " > $$&!

$ )-&! $$#& +

7" #!" $

)-&! -#%.

"

" --0$ "-& > 0A**08 A06@@6

, )-&!#"&

#$ "% =

!" #$ "%

,&

; -#%.

&

$ "

& + ?#

$#!& . < !

&!#-

, " !# )

& ." +

)"#& )% & .

+ 6*6*@ !#-- "

# " & !

" & #"&

, &)&-&"%

&!# !& "% $

!"& 4&" # % &"

"& . #

"&

#" &#- "#5

& " & "# #

, &"&

$ " &

$ " 2#-& &"% $ # % ! ,# " &. " + # " & 5 $ & $ & .

, !"& . " 2#-& &"% $ # % ,# " &. "

"# # #

" $ !

7,

&. " + #

-% # 2& " #"

"& -% " & 4

"# # & )1 !" " 2& & #" # % "& )% "

2 % $&2 % # # &$ " 2& + &" #,, 2 4&" #4

"# # $ # &"& #- "# # #

!# $ - !

& #"& #" # "& . $ " ,

- ) #

&)- " !

"

&!#- !

, &)- " !

&!#- !

!

" #

&"" #

& 2&" &" $

&""

# / # "

+ 4 &! %

!

" )

2& &

2& 4

$ " &

" 4&-! &2

#% #"" $ % $ - " #" %

!

" #2

** B# # )

" ! &2 # $#& # & . %

&2 + ?

" !5

+

- #5 % 2& 4 5 4 " "

9:6A

&"" "# #

Rev5/20/10 BRS

Play Set Assembly Manual FAQs:

1. Does the area for the playset need to be level?

Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground.

2. What size area is recommended for the playset?

Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety.

3. What age range is appropriate for the playsets?

Backyard Discovery playsets are recommended for children ages 3 – 10 years.

4. Is the wood treated with chemicals?

Backyard Discovery uses 100% Chinese Cedar wood which is naturally bug resistant, decay and rot resistant. To help ensure your child’s safety, our wood is completely chemical free and we do not use pressure-treated wood. The stain we use is a top coat using a water-based product that is for appearance only.

5. How often should the playset be stained?

Backyard Discovery recommends the playset be stained once each year. A water or oil based stain can be used at the customer’s discretion.

6. Why does it seem that my swing set is developing cracks?

Wood is a natural material; no two pieces are exactly alike. Each piece has its own characteristics and personality and reacts differently to climate changes. When any wood product is exposed to the elements, it develops “wood checks”. A check is the radial separation of the wood fibers running with the grain of the wood. These are caused by the varying temperature and moisture conditions. A check is not a crack – it does not affect the strength or durability of the wood or structural integrity of the play set.

7. Do Backyard Discovery playsets come with a warranty?

Yes. All Backyard Discovery products carry a 1-year replacement warranty on all parts for manufacturer’s defect. Our wood carries a 5 year warranty on rot and decay as well. Please see warranty details for more information.

8. What is the best way to get started assembling the playset?

Backyard Discovery recommends taking all the parts out of the boxes and arranging them by part number before you begin any assembly. This will not only allow faster assembly, but will also identify any parts that may be missing or damaged so they can be replaced before assembly. If parts are missing or need replacement, go to

www.swingsetsonline.com/support.aspx and follow the prompts to order them. Next, read the assembly manual and get the tools ready for the job as recommended in the manual. If the assembly manual is lost or misplaced a new one can be printed from Backyard Discovery’s website: www.swingsetsonline.com.

9. The playset seems to rock or sway too much. What’s wrong?

Rocking is caused by uneven ground or obstructions such as rocks, roots, etc. under the ground rails. These should be removed and the ground underneath re-leveled to prevent rocking. Also ensure the playset is securely staked to the ground using the stakes provided.

10. The 2”x4” boards do not measure 2”x 4”. Why not?

In the U.S. it is common practice to describe lumber dimensions using the rough cut sizes from the sawmill and not the finished dimensions. Retailers, home stores, etc. all use this accepted practice for describing lumber dimensions. However, Backyard Discovery playsets are designed and constructed using the actual dimensions so everything fits properly and remains so during the life of the playset.

11. The end beam is not straight up and down. Why not?

This is normal. Backyard Discovery designs playsets this way to ensure the strongest structure possible. The slight angle adds strength and reduces rocking and twisting.

12. The S-hooks for the swings won’t close. What is wrong?

Backyard Discovery recommends placing them on a hard surface such as concrete (don’t do this on anything that will dent such as metal or finished wood or glass which will break!). It will take quite a few strokes, but the hooks will close.

For more information and frequently asked questions, please refer to our website at www.swingsetsonline.com.

Tools Required for Installation:

(These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.)

(Square)

(Open End Wrenches 1/2")

(Level 24")

(Ladder) (Tape Measure)

(Rubber Mallet - Optional)

(Phillips & Straight

Blade Screw Drivers)

(Claw Hammer)

(Drill Attachments: Phillips

Head & Socket Driver)

(Cordless Drill or Electric Drill)

(3/8" Drive Ratchet, 1/2" STD

Sockets 1/2" Deep Sockets)

(An Adult w/ an Adult Helper)

(1/8" & 3/8" Drill Bits)

Basic Setup Dimensions

Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.

" !" $ "&

' )

!# ($%&

'# % )

( !# ($%&

'* )

"

' % )

Safe Play Zone

General Information:

!" #$%&

'( )

" !

'

($ "&

)

Safe play height: 16'-6 1/8" [3.2 m]

Maximum fall height: 6'-10 13/16" [2.1 m]

Important Assembly Notes

1) While assembling unit, take time before and after each phase to make sure fort is level. If fort is

not level, assembly will be difficult and improper assembly may result. Extra care must be taken to

insure the fort is square.

2) Tighten bolts securely, tighten nuts on bolts flush to the tube or member, and place caps over

exposed bolts snug to the nut.

3) Pay close attention to the ITEMS NEEDED FOR EACH PHASE. They can be a valuable aid when

sorting your wood and hardware. Assembly will be made easier if items are sorted by phase.

4) Pay close attention to make sure you are using the correct hardware in the correct phases. Using

incorrect hardware may result in improper assembly.

5) Whenever a T-nut is used, follow these directions. Place T-nut in pre-drilled hole. Tap in with hammer.

Place bolt with washers in the opposite side. Hand tighten to make sure the bolt is in the T-nut.

DO NOT over tighten.

6) Read the steps of each phase thoroughly. The written steps may include important information not

shown in the illustrations.

Parts Identification

Wood Components

(NOT TO SCALE)

+ ,

A50 - SWING BEAM - W102416

3 3/8"x5 1/4"x89 1/2" (86x134x2274)

+ ,

E1 - FORT UPRIGHT - W102432

1 3/8"x3 3/8"x89 5/8" (36x86x2275)

+ ,

E2 - FORT UPRIGHT - W102433

1 3/8"x3 3/8"x89 5/8" (36x86x2275)

+*,

E3 - DOUBLE ANGLE GUSSET - W102437

1 3/8"x3 3/8"x15 7/8" (36x86x403)

+ ,

E4 - SUNDECK UPRIGHT - W102497

1 3/8"x3 3/8"x33 7/8" (36x86x861)

+ ,

E5 - SUNDECK UPRIGHT - W102498

1 3/8"x3 3/8"x33 7/8" (36x86x861)

+ ,

E6 - TABLE TOP GUSSET - W102511

1 3/8"x3 3/8"x9 3/8" (36x86x237.5)

+ ,

E7 - LEFT LADDER RAIL - W102584

1 3/8"x3 3/8"x64 3/8" (36x86x1634)

+ ,

E8 - RIGHT LADDER RAIL - W102585

1 3/8"x3 3/8"x64 3/8" (36x86x1634)

+ ,

E50 - END SUPPORT - W100949

1 3/8"x3 3/8"x44 1/8" (36x86x1120)

+ ,

E51 - ANGLE BRACE - W100948

1 3/8"x3 3/8"x88 3/4" (36x86x2254)

+ ,

E72 - LEFT RAIL - W100036

1 3/8"x3 3/8"x61 3/4" (36x86x1570)

+ ,

E73 - RIGHT RAIL - W100037

1 3/8"x3 3/8"x61 3/4" (36x86x1570)

Parts Identification

Wood Components

(NOT TO SCALE)

+ ,

G1 - SIDE ARCH WALL RAIL - W102436

1"x5 1/4"x71 7/8" (24x134x1825)

+ ,

G2 - GROUND BOARD - W102438

1"x5 1/4"x43 3/4" (24x134x1110)

+ ,

G3 - WALL RAIL - W102441

1"x5 1/4"x43 3/4" (24x134x1110)

+ ,

G4 - GROUND BOARD - W102450

1"x5 1/4"x63 3/8" (24x134x1609)

+ ,

G5 - SIDE ARCH WALL RAIL - W102452

1"x5 1/4"x71 7/8" (24x134x1825)

+ ,

G6 - GROUND BOARD - W102453

1"x5 1/4"x63 3/8" (24x134x1609)

+ ,

G7 - CENTER ARCH WALL RAIL - W102456

1"x5 1/4"x40 7/8" (24x134x1037)

+ ,

G8 - CENTER ARCH WALL RAIL - W102504

1"x5 1/4"x43 3/4" (24x134x1110)

+ ,

G9 - TABLE TOP BOARD - W102508

1"x5 1/4"x43 3/4" (24x134x1110)

+ ,

G10 - TABLE TOP BOARD - W102509

1"x5 1/4"x43 3/4" (24x134x1110)

+ ,

G11 - WALL RAIL - W102542

1"x5 1/4"x11 5/8" (24x134x296)

Parts Identification

Wood Components

(NOT TO SCALE)

+ ,

G12 - OVERHANG BOARD - W102586

1"x5 1/4"x13 3/4" (24x134x350)

+ ,

G13 - OVERHANG BOARD - W102587

1"x5 1/4"x13 3/4" (24x134x350)

+ ,

G14 - OVERHANG BOARD - W102588

1"x5 1/4"x3 1/2" (24x134x90)

+ ,

G15 - OVERHANG BOARD - W102589

1"x5 1/4"x3 1/2" (24x134x90)

+ ,

G50 - GROUND BOARD - W100947

1"x5 1/4"x86 3/4" (24x134x2202)

+ ,

H1 - FLOOR SUPPORT - W102434

1"x3 3/8"x71 7/8" (24x86x1825)

+ ,

H2 - FLOOR SUPPORT - W102439

1"x3 3/8"x43 3/4" (24x86x1110)

+(,

H3 - FLOOR JOIST - W102448

1"x3 3/8"x43 5/8" (24x86x1108)

+ ,

H4 - FLOOR SUPPORT - W102451

1"x3 3/8"x71 7/8" (24x86x1825)

+ ,

H5 - WALL SLAT - W102454

1"x3 3/8"x55 5/8" (24x86x1414)

+ ,

H6 - BENCH SUPPORT - W102500

1"x3 3/8"x14 1/8" (24x86x360)

+ ,

H7 - BENCH SUPPORT - W102501

1"x3 3/8"x8 5/8" (24x86x220)

+ ,

H8 - WALL RAIL - W102507

1"x3 3/8"x43 3/4" (24x86x1110)

+ ,

H9 - ROOF SUPPORT - W102543

1"x3 3/8"x43 3/4" (24x86x1110)

Parts Identification

Wood Components

(NOT TO SCALE)

+ ,

H10 - ROOF SUPPORT - W102545

1"x3 3/8"x45 1/2" (24x86x1157)

+*,

H11 - ROOF TRUSS - W102546

1"x3 3/8"x35" (24x86x890)

+ ,

H12 - WALL RAIL - W102558

1"x3 3/8"x43 3/4" (24x86x1110)

+ ,

H13 - LADDER RUNG - W102583

1"x3 3/8"x21 1/8" (24x86x536)

+ ,

H14 - DOOR STOP - W102590

1"x3 3/8"x4 7/8" (24x86x125)

+ ,

H15 - OVERHANG CLEAT - W102627

1"x3 3/8"x5 1/4" (24x86x134)

+ ,

H16 - WALL SLAT - W102628

1"x3 3/8"x55 5/8" (24x86x1414)

+ ,

K1 - MENDING PLATE - W102556

5/8"x5 1/4"x11 3/8" (16x134x290)

+ ,

K2 - SUNBURST CENTER PIECE - W102557

5/8"x5 1/4"x13 3/8" (16x134x340)

+ ,

M1 - WALL RAIL - W102435

5/8"x3 3/8"x42 1/8" (16x86x1069)

+ ,

M2 - WALL RAIL - W102440

5/8"x3 3/8"x43 3/4" (16x86x1110)

+ ,

M3 - WALL RAIL - W102442

5/8"x3 3/8"x10 7/8" (16x86x276)

+ ,

M4 - WALL RAIL - W102443

5/8"x3 3/8"x43 3/4" (16x86x1110)

+( ,

M5 - LOWER ENCLOSURE SLAT - W102444

5/8"x3 3/8"x23" (16x86x583)

+ ,

M6 - FLOOR BOARD - W102445

5/8"x3 3/8"x71 7/8" (16x86x1825)

+ ,

M7 - WALL RAIL - W102449

5/8"x3 3/8"x42 1/8" (16x86x1069)

Parts Identification

Wood Components

(NOT TO SCALE)

+ ,

M8 - WALL SLAT - W102455

5/8"x3 3/8"x55 5/8" (16x86x1414)

+ ,

M9 - WALL RAIL - W102457

5/8"x3 3/8"x40" (16x86x1016)

+*,

M10 - ARCH WALL SLAT - W102458

5/8"x3 3/8"x42 7/8" (16x86x1090)

+*,

M11 - ARCH WALL SLAT - W102459

5/8"x3 3/8"x42 7/8" (16x86x1090)

+",

M12 - ARCH WALL SLAT - W102460

5/8"x3 3/8"x42 7/8" (16x86x1090)

+ ",

M13 - WALL SLAT - W102461

5/8"x3 3/8"x27" (16x86x685)

+ ,

M14 - WALL SLAT - W102499

5/8"x3 3/8"x42 7/8" (16x86x1090)

+ ,

M15 - BENCH CLEAT - W102503

5/8"x3 3/8"x7 7/8" (16x86x200)

+ ,

M16 - WALL SLAT - W102505

5/8"x3 3/8"x28 1/8" (16x86x715)

+ ,

M17 - WALL RAIL - W102506

5/8"x3 3/8"x7 5/8" (16x86x195)

+ ,

M18 - TABLE TOP CLEAT - W102510

5/8"x3 3/8"x6 1/4" (16x86x160)

+ ,

M19 - LADDER WALL CAP - W102512

5/8"x3 3/8"x34" (16x86x863)

+ ,

M20 - SWING WALL CAP - W102513

5/8"x3 3/8"x40 7/8" (16x86x1038)

+ ,

M21 - WALL RAIL - W102514

5/8"x3 3/8"x43 3/4" (16x86x1110)

Parts Identification

Wood Components

(NOT TO SCALE)

+ ,

M22 - LOWER ENCLOSURE SLAT - W102515

5/8"x3 3/8"x23" (16x86x583)

+ ,

M23 - ARCH WALL SLAT - W102625

5/8"x3 3/8"x42 7/8" (16x86x1090)

+ ,

M24 - WALL RAIL - W102626

5/8"x3 3/8"x10 7/8" (16x86x276)

+*,

M25 - UPPER SLAT - W102518

5/8"x3 3/8"x15" (16x86x380)

+ ,

M26 - UPPER ARCHED SLAT - W102519

5/8"x3 3/8"x15" (16x86x380)

+ ,

M27 - WALL RAIL - W102520

5/8"x3 3/8"x11 5/8" (16x86x296)

+ ,

M28 - DOUBLE ARCH WALL SLAT - W102541

5/8"x3 3/8"x42 7/8" (16x86x1090)

+ ,

M29 - GABLE BOARD - W102551

5/8"x3 3/8"x45 1/2" (16x86x1157)

+ ,

M30 - GABLE BOARD - W102552

5/8"x3 3/8"x38 3/4" (16x86x985)

+ ,

M31 - REAR SUPPORT - W102582

5/8"x3 3/8"x22 7/8" (16x86x582)

+ ,

M70 - SLIDE BED SUPPORT - W100935

5/8"x3 3/8"x19 7/8" (16x86x505)

+ ,

M74 - ROCK WALL BOARD - W100987

5/8"x3 3/8"x26 5/8" (16x86x675)

+*,

M75 - ROCK WALL BOARD - W100988

5/8"x3 3/8"x26 5/8" (16x86x675)

+*,

M76 - ROCK WALL BOARD - W100989

5/8"x3 3/8"x26 5/8" (16x86x675)

Parts Identification

Wood Components

(NOT TO SCALE)

+ ,

N1 - FLOOR BOARD - W102446

5/8"x2 3/8"x34" (16x60x864)

+ ,

N2 - FLOOR BOARD - W102447

5/8"x2 3/8"x25 3/4" (16x60x653)

+ ,

N3 - ROOF BRACE - W102549

5/8"x2 3/8"x32 5/8" (16x60x830)

+ ,

N4 - ROOF BRACE - W102550

5/8"x2 3/8"x34 1/4" (16x60x870)

+ ,

N5 - GABLE BOARD - W102553

5/8"x2 3/8"x32" (16x60x813)

+*,

N6 - SUNBURST BOARD - W102554

5/8"x2 3/8"x7 1/2" (16x60x190)

+ ,

N7 - VERTICAL SUNBURST BOARD - W102555

5/8"x2 3/8"x12 1/4" (16x60x310)

+ ,

N71 - ROCK WALL END BOARD - W100490

5/8"x2 3/8"x27 7/8" (16x60x707)

+ ,

Q1 - BENCH BOARD - W102502

1"x4 3/8"x47 1/2" (24x112x1205)

+ (,

R1 - ROOF SLAT - W102547

3/4"x5 1/2"x50 3/8" (18x140x1280)

+ ,

R2 - ARCHED ROOF SLAT - W102548

3/4"x5 1/2"x50 3/8" (18x140x1280)

+ ,

SP50 - SWING BEAM SUPPORT - W102417

3 3/8"x3 3/8"x49 3/8" (86x86x1254)

(1) WP1 - CABIN DOOR - W102580

(1)

QG - BOLT WH 5/16x6 - H100023

Parts Identification

Hardware

(32)

F - BOLT WH 5/16x1 - H100008

(7)

AE - BOLT WH 5/16x5-3/4 - H100032

(13)

QD - BOLT WH 5/16x4-1/4 - H100166

(2)

T - BOLT WH 5/16x4 - H100020

(24)

CM - BOLT WH 5/16x1/2 - H100115

(4)

KT - BOLT WH 1/4x1" - H100137

(26)

AZ - BOLT PTH 1/4x1-1/4 - H100062

(15)

Z - LAG SCREW WH 5/16x2 - H100027

(2)

S - BOLT WH 5/16x3-3/4 - H100019

(19)

P - BOLT WH 5/16x3 - H100016

(2)

M - BOLT WH 5/16x2-1/2 - H100014

(48)

K - BOLT WH 5/16x2 - H100012

(7)

AA - LAG SCREW WH 5/16x2-1/2 - H100028

(7)

LC - LAG SCREW WH 1/4x1-1/2 - H100145

(4)

AJ - BOLT HEX 5/16x1-1/4 - H100042

(2)

AS - BOLT HEX 5/16x4-1/4 - H100054

(9)

AT - BOLT HEX 3/8x5-3/4 - H100056

(36)

H - BOLT WH 5/16x1-1/2 - H100010

Parts Identification

Hardware

(44)

BW - SCREW PFH 8x3 - H100092

(48)

CK - SCREW PFH 8x2 - H100111

(4)

KS - NUT BARREL WH 1/4x5/8" - H100136

(136)

BS - SCREW PFH 8x1-3/4" - H100089

(148)

BP - SCREW PFH 8x1-1/2" - H100086

(22)

B - NUT BARREL WH 5/16x5/8 - H100004

(362)

BR - SCREW PFH 8x1-1/8" - H100088

(26)

BN - SCREW PFH 8x1" - H100085

(4)

CR - SCREW PFH 8x3/4 - H100121

(115)

D - NUT BARREL WH 5/16x7/8 - H100005

(11)

C - NUT BARREL WH 5/16x1-1/2 - H100006

(26)

BE - T-NUT 1/4 - H100072

(13)

E - NUT BARREL WH 5/16x1-3/4 - H100007

(22)

BG - T-NUT 5/16 - H100074

(9)

BF - T-NUT 3/8 - H100073

(13)

CJ - NUT LOCK 5/16 - H100110

(7)

BL - SCREW TAPPING 14x3/4 - H100083

(2)

CY - SCREW PWH 8x5/8 - H100128

Parts Identification

Hardware

(179)

AC - WASHER LOCK EXT 8x19 - H100030

(4)

KW - WASHER LOCK EXT 8x15 - H100139

(149)

AD - WASHER LOCK EXT 12x19 - H100031

(9)

CF - WASHER LOCK INT 10x18 - H100107

(26)

CG - WASHER LOCK INT 8x15 - H100108

(2)

MC - WASHER LOCK INT 7x12 - H100157

(7)

BX - WASHER SPLIT 5/16 - H100095

(9)

CA - WASHER FLAT 11x25 - H100102

(22)

CD - WASHER FLAT 8x27 - H100105

(7)

CE - WASHER FLAT 9x18 - H100106

Parts Identification

Accessories

(NOT TO SCALE)

(1)

DR - SLIDE RAIL 10' BOTTOM LEFT GREEN - A100030

(2)

- T-40 Torx Driver - A100042

(2)

- T-30 Torx Driver - A100147

(1)

DS - SLIDE RAIL 10' BOTTOM RIGHT GREEN - A100031

(1)

DT - SLIDE RAIL 10' TOP LEFT GREEN - A100032

(1)

TR - SLIDE RAIL 10' TOP RIGHT GREEN - A100033

(1)

DX - SLIDE BED 10' LIGHT GREEN - A100035

(1)

DN - GLIDER SEAT DARK GREEN - A100025

(1)

TB - SWING BEAM EXTENSION BRACKET - A100325

(2)

DP - SWING SEAT GREEN - A100027

(1)

TC - SWING BEAM EXTENSION BRACKET - A100326

(2)

DO - CAPTAINS GLIDER ARM YELLOW - A100026

Parts Identification

Accessories

(NOT TO SCALE)

+ ,

EJ - L BRACKET 54x67

-A100053

+ ,

EV - CLIMBING ROCK - GREEN

-A100064

+ ,

GD - L BRACKET 66x66x127

-A100140

+*,

ED - SINGLE DUCTILE HANGER

-A100046

+*,

EY - TUBING CAP GLIDER SUPPORT

-A100067

+*,

EX - GLIDER BUSHING BYD GREEN

-A100066

(2)

EW - GLIDER SUPPORT BYD GREEN - A100065

+ ,

TD - HINGE (DOOR, SPRING LOADED)

-A100327

(4)

FX - HAND GRIP METAL GREEN 381 c/c - A100118

(8)

FA - QUICK LINK - A100069

(1)

HZ - KNOB - A100071

(1)

EH - LTP ID TAG - A100051

(4)

DW - SLIDE SUPPORT TUBE 21.34x505 - A100034

(6)

KC - METAL GROUND STAKE BROWN - A100178

(2)

TA - METAL LADDER RAIL - Y35-24.75G - A100324

(4)

EZ - CHAIN GREEN 51.25" - A100068

(4)

EF - CHAIN GREEN 57" - A100047

(1) SQ - "A" REVISION TAG - A100314

(1)

A50 - SWING BEAM - W102416

3 3/8"x5 1/4"x89 1/2" (86x134x2274)

(1)

TB - SWING BEAM EXTENSION BRACKET - A100325

(1)

TC - SWING BEAM EXTENSION BRACKET - A100326

(2)

GD - L BRACKET 66x66x127 - A100140

5 FT SWING BEAM EXTENDED

STEP 1

ATTACH L BRACKETS GD TO A50 SWING BEAM USING 4-1/4" BOLTS, SPLIT WASHERS,

FLAT WASHERS AND 5/16" LOCK NUTS.

ATTACH EXTENSION BRACKETS TB AND TC TO A50 SWING BEAM USING 3" BOLTS AND

7/8" BARREL NUTS, AS SHOWN.

GD

(3)

BOLT WH

5/16x3

(2)

BOLT HEX

5/16x4-1/4

(2)

NUT LOCK

5/16

(2)

WASHER

SPLIT 5/16

(4)

(3)

NUT BARREL

WH 5/16x7/8

WASHER

FLAT 8x27

A50

FINGER TIGHTEN ONLY AT THIS TIME.

TB

TC

5 FT SWING BEAM EXTENDED

STEP 3

ATTACH SP50 TO TB AND TC EXTENSION BRACKETS USING 3" BOLTS AND

7/8" BARREL NUTS, AS SHOWN.

(2)

BOLT WH

5/16x3

(2)

NUT BARREL

WH 5/16x7/8

TC

TB

TIGHTEN ALL BOLTS

AT THIS TIME.

SP50

SP50

(1)

N71 - ROCK WALL END BOARD - W100490

5/8"x2 3/8"x27 7/8" (16x60x707)

STEP 2

USING N71 AS A GUIDE, PRE-DRILL TOP EDGE OF RAILS WITH 1/8" DRILL BIT. FAILURE

TO PRE-DRILL MAY RESULT IN BOARD SPLITTING.

ATTACH N71 ROCK WALL END BOARD TO E72 & E73 RAILS USING 1 1/2" SCREWS.

(2)

SCREW PFH

8x1-1/2"

E72

E73

E73

N71

N71

FLU

SH

EV - CLIMBING ROCK - GREEN - A100064

STEP 3

ATTACH EV ROCKS TO BOARDS USING 1/4"X1 1/4" BOLTS, LOCK WASHERS, AND 1/4"

T-NUTS.

(24)

BOLT PTH

1/4x1-1/4

(24)

WASHER

LOCK INT

8x15

(24)

T-NUT 1/4

TOP

10 FOOT SLIDE ASSEMBLY

PHASE 1

STEP 1

●

PLACE SLIDE BED SUPPORT CENTERED ON THE BOTTOM 1/2" FROM THE EDGE. TRANSFER HOLES

ON THE BOARD THROUGH THE SLIDE BED AS SHOWN BELOW. USE A 3/8" DRILL BIT.

●

ATTACH SLIDE BED SUPPORT TO SLIDE USING HARDWARE SHOWN.

QTY

1

ITEMS FOR PHASE 1

DESCRIPTION

SLIDE BED 10' LIGHT GREEN

1

3

3

3

SLIDE BED SUPPORT

BOLT WH 5/16x1/2

WASHER LOCK EXT 12x19

NUT BARREL WH 5/16x5/8

LABEL

DX

M70

CM

AD

B

SLIDE BED 10' LIGHT GREEN

(SEE SLIDE ASSEMBLY

INSTALLATION STEP FOR

TOP MOUNTING HOLE

DRILLING LOCATIONS).

NUT BARREL WH 5/16x5/8

WASHER LOCK EXT 12x19

BOTTOM

BOLT WH 5/16x1/2

M70

USE M70 SLIDE BRACE AS A TEMPLATE

FOR DRILLING BOTTOM HOLE PATTERN

IN SLIDE BED. BE SURE TO PLACE

SLIDE BRACE UP 1/2" FROM BOTTOM

EDGE OF SLIDE BED BEFORE MARKING

HOLE PATTERN.

TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.

10 FOOT SLIDE ASSEMBLY

PHASE 2

STEP 2

●

ASSEMBLE WITH HARDWARE AS SHOWN.

●

REPEAT ON OTHER SIDE, MAKING A LEFT AND RIGHT ASSEMBLY.

8

8

1

8

QTY

1

1

1

ITEMS FOR PHASE 2

DESCRIPTION

SLIDE RAIL 10' BOTTOM LEFT GREEN

SLIDE RAIL 10' BOTTOM RIGHT GREEN

SLIDE RAIL 10' TOP LEFT GREEN

SLIDE RAIL 10' TOP RIGHT GREEN

BOLT WH 5/16x1/2

WASHER LOCK EXT 8x19

NUT BARREL WH 5/16x1-1/2

TR

CM

AC

C

DR

STOCK NUMBER

DS

DT

WASHER LOCK EXT 8x19

BOLT WH 5/16x1/2

NUT BARREL WH 5/16x1-1/2

10 FOOT SLIDE ASSEMBLY

PHASE 3

STEP 3

●

PLACE (1) SLIDE RAIL ASSEMBLY ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE SLIDE RAIL (FIG. 1). PUT

SLIDE BED SUPPORT INTO THE SUPPORT POCKET AT THE BOTTOM OF THE RAIL AND HAVE A HELPER BEND THE SLIDE BED TOWARDS THE

TOP OF THE SLIDE AND INSERT THE BED INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS COMPLETELY DOWN IN THE SLIDE CAVITY.

●

INSTALL THE (4) SLIDE SUPPORT TUBES INTO THEIR RESPECTIVE PILOT LOCATIONS (FIG. 1).

●

PLACE THE OTHER SLIDE RAIL ASSEMBLY ON A FLAT SURFACE WITH THE SLIDE CAVITY UP. HAVE A HELPER HOLD THE TOP END OF THE SLIDE

BED AND BEGIN INSERTING THE SLIDE BED, SUPPORT TUBES, AND SUPPORT BOARD INTO THE CAVITY AND SUPPORT POCKETS STARTING AT

THE BOTTOM OF THE SLIDE AND WORKING UP TO THE TOP (FIG. 2).

QTY

4

ITEMS FOR PHASE 3

DESCRIPTION

SLIDE SUPPORT TUBE 21.34x505

STOCK NUMBER

DW

SLIDE SUPPORT TUBE 21.34x505

10 FOOT SLIDE ASSEMBLY

PHASE 4

STEP 4

●

ONCE THE SLIDE BED, SUPPORT TUBES, AND SUPPORT BOARD ARE COMPLETELY IN THE CAVITY AND SUPPORT POCKET, SECURE USING

3" SCREWS AT EACH OF THE PILOT HOLE LOCATIONS AS SHOWN.

QTY

38

ITEMS FOR PHASE 4

DESCRIPTION

SCREW PFH 8x3

STOCK NUMBER

BW

SCREW PFH 8x3

(1) TABLE TOP ASSEMBLY

STEP 10

ATTACH TABLE TOP ASSEMBLY FROM STEP 8 TO E6 GUSSETS USING 1 3/4" SCREWS.

(7)

SCREW PFH

8x1-3/4"

E3 - DOUBLE ANGLE GUSSET - W102437

1 3/8"x3 3/8"x15 7/8" (36x86x403)

STEP 11

ATTACH TOPS OF (2) E3 GUSSETS TO H2 FLOOR SUPPORT USING 2" BOLTS, LOCK

WASHERS, AND 7/8" BARREL NUTS; ATTACH AT THE BOTTOM TO E2 UPRIGHTS USING 2"

LAG SCREWS AND LOCK WASHERS.

ATTACH TOP OF (1) E3 GUSSET TO H1 FLOOR SUPPORT USING 2" BOLTS, LOCK

WASHERS, AND 7/8" BARREL NUTS; ATTACH AT THE BOTTOM TO E1 UPRIGHT USING 2

1/2" LAG SCREW AND LOCK WASHER.

ATTACH TOP OF REMAINING E3 GUSSET TO H4 FLOOR SUPPORT USING 2" BOLTS, LOCK

WASHERS, AND 7/8" BARREL NUTS; ATTACH AT THE BOTTOM TO E1 UPRIGHT USING 2

1/2" LAG SCREW AND

LOCK WASHER.

(2)

LAG SCREW

WH 5/16x2-1/2

(2)

LAG SCREW

WH 5/16x2

(8)

BOLT WH

5/16x2

(12)

WASHER

LOCK EXT

8x19

WASHER

(8) LOCK EXT

12x19

(8)

NUT BARREL

WH 5/16x7/8

(1)

M2 - WALL RAIL - W102440

5/8"x3 3/8"x43 3/4" (16x86x1110)

(1)

M24 - WALL RAIL - W102626

5/8"x3 3/8"x10 7/8" (16x86x276)

(1)

M9 - WALL RAIL - W102457

5/8"x3 3/8"x40" (16x86x1016)

(2)

M10 - ARCH WALL SLAT - W102458

5/8"x3 3/8"x42 7/8" (16x86x1090)

E4

(2)

EJ - L BRACKET 54x67 - A100053

(2)

M23 - ARCH WALL SLAT - W102625

5/8"x3 3/8"x42 7/8" (16x86x1090)

STEP 16

ATTACH M2 WALL RAIL TO E2 UPRIGHTS USING 2" LAG SCREWS AND LOCK WASHERS.

ATTACH M24 WALL RAIL TO E2 UPRIGHT USING 1 1/2" BOLTS, LOCK WASHERS, AND 7/8"

BARREL NUTS. NOTE THE HOLE ORIENTATION SHOWN BELOW.

ATTACH M9 WALL RAIL TO E1 UPRIGHT AND E4 SUNDECK UPRIGHT USING 1 1/2" BOLTS,

LOCK WASHERS, AND 7/8" BARREL NUTS.

(6)

BOLT WH

5/16x1-1/2

WASHER

(8) LOCK EXT

8x19

(2)

LAG SCREW

WH 5/16x2

WASHER

(6) LOCK EXT

12x19

M24

M9

(6)

NUT BARREL

WH 5/16x7/8

FLIP M24 BOARD

SO HOLE IS

TOWARDS THE TOP

E2

M2

M9

E2

E1

M24

STEP 17

ATTACH MIDDLES OF (2) M10 ARCHED WALL SLATS TO G3 WALL RAIL USING 1" BOLTS,

LOCK WASHERS, AND 7/8" BARREL NUTS; ATTACH BOTTOMS TO M2 WALL RAIL USING

1" BOLTS, LOCK WASHERS, AND 5/8" BARREL NUTS.

ATTACH MIDDLE OF (1) M23 ARCHED WALL SLAT TO G5 WALL RAIL USING 1" BOLTS,

LOCK WASHERS, AND 7/8" BARREL NUTS; ATTACH BOTTOM TO M24 WALL RAIL USING

EJ BRACKET, 1" BOLT, LOCK WASHERS, 7/8" BARREL NUT. SECURE EJ BRACKET TO

FLOOR USING 3/4" TAPPING SCREW.

ATTACH MIDDLE OF (1) M23 ARCHED

WALL SLAT TO G5 WALL RAIL USING

1" BOLTS, LOCK WASHERS, AND 7/8" BARREL

NUTS; ATTACH BOTTOM TO M9 WALL RAIL

USING EJ BRACKET, 1" BOLT, LOCK

WASHERS, AND 7/8" BARREL

NUT. SECURE EJ BRACKET

TO FLOOR USING

3/4" TAPPING SCREW.

G3

M10

M23

EJ

M24

(8)

BOLT WH

5/16x1

SCREW

(2)

TAPPING

14x3/4

WASHER

(8) LOCK EXT

12x19

WASHER

(8) LOCK EXT

8x19

(2)

NUT BARREL

WH 5/16x5/8

(6)

NUT BARREL

WH 5/16x7/8

G5

M2

M9

EJ

M13 - WALL SLAT - W102461

5/8"x3 3/8"x27" (16x86x685)

H11 - ROOF TRUSS - W102546

1"x3 3/8"x35" (24x86x890)

K1 - MENDING PLATE - W102556

5/8"x5 1/4"x11 3/8" (16x134x290)

STEP 25

ATTACH M13 WALL SLATS TO G5 & M9 WALL RAILS AS SHOWN USING 1 1/8" SCREWS.

(16)

SCREW PFH

8x1-1/8"

STEP 26

ATTACH H11 ROOF TRUSSES TO H10 ROOF SUPPORTS USING 1 1/2" BOLTS, LOCK

WASHERS, AND 7/8" BARREL NUTS. LEAVE SLIGHTLY LOOSE AND ROTATE SO TRUSSES

MEET AT A PEAK IN THE CENTER AND THEN TIGHTEN BOLTS.

ATTACH K1 MENDING PLATES TO H11 ROOF TRUSSES USING 1 1/8" SCREWS.

(4)

BOLT WH

5/16x1-1/2

(8)

SCREW PFH

8x1-1/8"

(4)

WASHER

LOCK EXT

8x19

WASHER

(4)

LOCK EXT

12x19

(4)

NUT BARREL

WH 5/16x7/8

(13)

R1 - ROOF SLAT - W102547

3/4"x5 1/2"x50 3/8" (18x140x1280)

(1)

R2 - ARCHED ROOF SLAT - W102548

3/4"x5 1/2"x50 3/8" (18x140x1280)

(1)

N4 - ROOF BRACE - W102550

5/8"x2 3/8"x34 1/4" (16x60x870)

(1)

N3 - ROOF BRACE - W102549

5/8"x2 3/8"x32 5/8" (16x60x830)

(1)

EJ - L BRACKET 54x67 - A100053

STEP 27

STARTING AT THE PEAK OF THE ROOF, ATTACH R1 ROOF SLAT FLUSH AT THE PEAK

WITH A 1 1/2" OVERHANG AT THE FRONT AND REAR USING 1 1/2" WOOD SCREWS. (SEE

DIAGRAM.)

FLUSH (6) REMAINING R1 ROOF SLATS TO THE PREVIOUSLY INSTALLED ROOF SLAT

USING 1 1/2" WOOD SCREWS AN THEN REPEAT THE PROCESS FOR THE OPPOSITE SIDE

OF ROOF. MAKE SURE TO ATTACH R2 ARCHED ROOF SLAT LAST.

R1

(7 PLCS)

(56)

SCREW PFH

8x1-1/2"

R1

(6 PLCS)

R2

1 1/2" TYP

OVERHANG

STEP 28

ATTACH N3 & N4 ROOF BRACES TO ROOF SLATS USING 1" WOOD SCREWS, AS SHOWN.

(SEE LOCATION DIMENSIONS.)

ATTACH EJ BRACKET TO ROOF BRACES USING 3/4" TAPPING SCREWS AND LOCK

WASHERS, AS SHOWN.

EJ

N4

N3

R2

7"

N3 & N4 LOCATION

(12)

SCREW PFH

8x1"

(2)

SCREW

TAPPING

14x3/4

(2)

WASHER

LOCK INT

7x12

(1)

H14 - DOOR STOP - W102590

1"x3 3/8"x4 7/8" (24x86x125)

(1) WP1 CABIN DOOR ASSEMBLY

STEP 39

ATTACH H14 DOOR STOP TO H5 WALL SLAT AS SHOWN USING 1 1/2" SCREWS.

H5

H14

(4)

SCREW PFH

8x1-1/2"

STEP 40

ATTACH TD HINGES TO WP1 CABIN DOOR ASSEMBLY USING 1" WOOD SCREWS, AS

SHOWN.

ATTACH WP1 CABIN DOOR ASSEMBLY TO H16 WALL SLAT USING 1" WOOD SCREWS

THROUGH TD HINGES, AS SHOWN.

WP1

H16

(12)

SCREW PFH

8x1"

TD

(1) SLIDE ASSEMBLY

(1) LADDER ASSEMBLY

STEP 45

ATTACH LADDER ASSEMBLY TO H4 FLOOR SUPPORT USING 2-1/2" LAG SCREWS AND

WASHERS, AS SHOWN.

(2)

LAG SCREW

WH 5/16x2-1/2

(2)

WASHER

LOCK EXT

8x19

STEP 46

CENTER SLIDE ASSEMBLY IN OPENING. USING SLIDE ASSEMBLY AS A TEMPLATE, DRILL

THREE 10 MM HOLES THROUGH THE SLIDE AND THE M6 FLOOR BOARD. ATTACH SLIDE

ASSEMBLY TO M6 FLOOR BOARD USING 1/2" BOLT, WASHER AND 5/8" BARREL NUT, AS

SHOWN. (SEE HOLE LOCATION DIAGRAM BELOW FOR PLACEMENT).

(3)

BOLT WH

5/16x1/2

(3)

WASHER

LOCK EXT

12x19

(3)

NUT BARREL

WH 5/16x5/8

HOLE LOCATION DIAGRAM

SLIDE ASSEMBLY

(4)

FX - HAND GRIP METAL GREEN 381 c/c - A100118

STEP 47

USING FX METAL HAND GRIPS AS A TEMPLATE, PRE-DRILL USING A 3/8" DRILL BIT AND

ATTACH FX METAL HAND GRIPS TO M23 WALL SLATS USING 1/2" BOLTS, LOCK

WASHERS & 5/8" BARREL NUTS, AS SHOWN. (SEE DIAGRAM FOR MOUNTING LOCATION).

(4)

BOLT WH

5/16x1/2

(4)

WASHER

LOCK EXT

12x19

M23

FX

(4)

NUT BARREL

WH 5/16x5/8

3 1/8"

(2 PLCS)

1 11/16"

(2 PLCS)

STEP 48

USING FX METAL HAND GRIPS AS A TEMPLATE, PRE-DRILL USING A 3/8" DRILL BIT AND

ATTACH FX METAL HAND GRIPS TO M16 WALL SLATS USING 1/2" BOLTS, LOCK

WASHERS & 5/8" BARREL NUTS, AS SHOWN. (SEE DIAGRAM FOR MOUNTING LOCATION).

M16

M16

FX

(4)

BOLT WH

5/16x1/2

(4)

WASHER

LOCK EXT

12x19

(4)

NUT BARREL

WH 5/16x5/8

3 1/8"

(2 PLCS)

1 11/16"

(2 PLCS)

(4)

EX - GLIDER BUSHING BYD GREEN - A100066

(2)

EW - GLIDER SUPPORT BYD GREEN - A100065

(4)

EY - TUBING CAP GLIDER SUPPORT - A100067

STEP 49

ATTACH (2) EW GLIDER SUPPORTS TO SWING BEAM ASSEMBLY USING 5-3/4" BOLTS,

FLAT WASHERS & 5/16" LOCK NUTS, AS SHOWN.

INSERT SWING HANGER QUICK LINK THROUGH EX GLIDER BUSHING AND EW GLIDER

SUPPORT AND ATTCH USING FLAT WASHER AND 5/16" LOCK NUT, AS SHOWN.

INSERT EY GLIDER SUPPORT CAP INTO BOTH ENDS OF EW GLIDER SUPPORT, AS

SHOWN. REPEAT ENTIRE PROCESS FOR SECOND GLIDER SUPPORT.

(4)

(8)

BOLT WH

5/16x5-3/4

(4)

SWING

HANGER

QUICK LINK

WASHER

FLAT 8x27

(8)

NUT LOCK

5/16

SWING BEAM ASSEMBLY

EY

EX

EW

EH - LTP ID TAG - A100051

STEP 53

ATTACH EH ID PLACARD TO SWING BEAM

ASSEMBLY USING 3/4" SCREWS, AS SHOWN.

ATTACH SQ REVISION TAG TO FORT ASSEMBLY

USING 5/8" SCREWS, WHERE SHOWN.

SQ - "A" REVISION TAG - A100314

(4)

SCREW PFH

8x3/4

(2)

SCREW PWH

8x5/8

SWING BEAM ASSEMBLY

Limited Warranty

This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time

Products.

Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories. All wood carries a five (5) year pro-rated warranty against rot and decay. Refer to the schedule below for charges associated with replacement of parts under this Limited Warranty. In addition,

Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging.

This warranty applies to the original owner and registrant and is non-transferable. Regular maintenance is required to assure maximum life and performance of this product and failure by the owner to maintain the product according to the maintenance requirements may void this warranty. Maintenance guidelines are provided in the Owner’s Manual.

This Limited Warranty does not cover:

•

Labor for any inspection

•

Labor for replacement of any defective item(s)

•

Incidental or consequential damages

•

Cosmetic defects which do not affect performance or integrity of a part or the entire product

•

Vandalism, improper use, failure due to loading or use beyond the capacities stated in the applicable

Assembly Manual.

•

Acts of nature including but not limited to wind, storms, hail, floods, excessive water exposure

•

Improper installation including but not limited to installation on uneven, unlevel, or soft ground

•

Minor twisting, warping, checking, or any other natural occurring properties of wood that do not affect performance or integrity

Backyard Discovery products have been designed for safety and quality. Any modifications made to the original product could damage the structural integrity of the unit leading to failure and possible injury.

Modification voids any and all warranties and Backyard Discovery assumes no liability for any modified products or consequences resulting from failure of a modified product.

This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a Backyard Discovery product be used in public settings. Such use may lead to product failure and potential injury. Any and all public use will void this warranty. Backyard Discovery disclaims all other representations and warranties of any kind, express or implied.

This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to province. This warranty excludes all consequential damages, however, some states do not allow the limitation or exclusion of consequential damages and therefore this limitation may not apply to you.

Pro Rated Part Replacement Schedule

Product Age

All Parts

0-30 days from date of purchase

31 days to 1 year

Wood Rot and Decay Only

1 year

2 years

3 years

4 years

5 years

Over 5 years

Customer Pays

$0 and free shipping

$0 + S&H

$0 and free shipping

20% + S&H

40% + S&H

60% + S&H

80% + S&H

100% + S&H

Rev5/20/10 BRS