TQMa7x - NeoMore
TQMa7x
Energy efficient for future designs
The Minimodule TQMa7x, based on the i.MX7 from NXP, combines an
ARM Dual Cortex-A7 core technology with a variety of interfaces. The
integrated graphics controller supports applications with display and
touch screen requirements. For various applications such as networking, industrial automation and controls with requirements for fast and
secure data processing, there are two CPU variants available. With a
Single- / Dual-Core ARM Cortex™-A7 core and a clock rate up to 2 x 1,0
GHz the TQMa7x provides a balanced ratio between high performance and power dissipation.
The highlights:
 Graphic with full HD support
 Extended temperature range
 High-Speed communication via 2x Gigabit Ethernet
and 1x PCle interface
 Low power consumption (typ. 2 W)
 Integrated Cortex M4
 IEEE 1588 hardware support
 Security functions
Block Diagram TQMa7x
Core2@1.0 GHz
Core1@1.0 GHz
(800 MHz)
32 kB I / D
L1 Cache
512 KB L2-Cache
Camera
24Bit / 2 x MIPI
2 x Gigabit
ETH
Cortex-A7
Single / Dual
Cortex M4
DDR3L-SDRAM
Q-SPI
NOR Flash
eMMC Flash
EEPROM
RTC
Power
16kB I/D
L1 Cache
Security
RNG, 10 tamper pins, Ciphers, DPA, RTC, RSA 4096, 32k storage
Smart
Card
4 x SPI
PCIe
Local
bus
1920 x 1080
Grafik
SDIO/
MMC
2x
CAN
3x
USB 2.0
3 x I²S,
4 x I²C
7x
UART
5V
Module connector 320 Pins
Technical specification
Ordering information
Microprocessor
i.Mx7S, i.Mx7D
TQMa7S-AA
TQMa7S, i.MX7S (Single Cortex-A7) / 800 MHz, 4 GB eMMC
Flash, 512 MB DDR3L, 64 kB EEPROM, -20°C …+85°C
System interfaces Up to 2x Ethernet 10/100/1000 Mbit
Up to 2x CAN
Up to 2x USB 2.0 high speed OTG interface
Up to 1x USB 2.0 high speed HOST interface
Up to 7x UART
Periphery interfaces
Up to 3x SDIO/MMC
Up to 4x I²C
Up to 4x SPI
Up to 3x I²S
Up to 1x Smart Card
Up to 1x PCIe
Graphic
LCD Interface (24 Bit RGB)
Up to 2 Camera Sensor Interface (24Bit /MIPI)
© TQ-Systems GmbH 2016 l All data is for information purposes only | Subject to change without notice | EMB_Datasheet: TQMa7x_en_Rev.101
Memory
DDR3L-SDRAM: Up to 2 GB
Quad SPI NOR: Up to 256 MB
Up to 32 GB eMMC flash
EEPROM: 0 / 64 kbit
Other
Integrated Cortex M4
Real Time Clock (RTC)
Temperature sensor
CPU JTAG Interface
TQMa7D-AA
TQMa7D, i.MX7D (Dual Cortex-A7) / 1,0 GHz, 4 GB eMMC Flash
512 MB DDR3L, 64 kB EEPROM, -20°C …+85°C
STKa7x-AA
STKa7x (Eval Kit) with TQMa7x-AA, Dual Cortex-A7 / 1,0 GHz,
512 MB DDR3L, 4 GB eMMC Flash,
64 kB EEPROM, 1x RS232, 1x RS485, 2 x CAN 2.0B separated
3x USB 2.0 HOST, 1x USB 2.0 OTG, 2x ETH 10/100/1000,
LCD Port, 1xHDMI, LVDS, 1x Mini PCIe, RTC,
Temperature sensor, Reset-Button, SD interface,
Power supply, 4 GB SD card, Cables
Starter kit STKa7x set
The core of the STKa7x set is the TQMa7x module with a Dual
Cortex-A7 CPU. The components contained in the starter kit
constitute a modular system enabling you to develop your
own product ideas. Development of graphic interfaces can
be started immediately using the prepared combination of
closed display unit and starter kit that are matched to each
other. To develop your own hardware you can use the certified
and qualified circuit components of the starter kit in your own
designs.
Power supply
5V
Ambient conditions
Standard temperature range: -20°C…+85°C
Dimensions
54 mm x 44 mm
Plug-in system
Board-to-board plug-in system 320 pins
Operating systems
Linux
Operating systems on request
VxWorks, QNX, WIN EC 2013
TQ-Systems GmbH
Mühlstr. 2 l Gut Delling | 82229 Seefeld | Germany
Phone: +49 8153 9308-0 | Fax: +49 8153 4223
info@tq-group.com | www.tq-group.com
>> Quicklink: www.tq-group.com/en/TQMa7x
Technology in Quality
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising