TF-4388 IB GB
GB SIZE: 148x105mm
NPD-702
INSTRUCTION MANUAL
For Sales Information Please
Contact
RoadTrucker Inc
(www.RoadTrucker.com
8312 Sidbury Rd. Wilmington, NC
28411
(800) 507-0482 / (910) 686-4281
7” PORTABLE DVD PLAYER WITH USB/SD/MMC INPUTS
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
Use of controls or adjustments or performance of procedures
other thanthose specified herein may result in hazardous
radiation exposure.
This Compact Disc player is classified as CLASS 1 LASER product.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CAUTION!
Invisible laser radiation when open and interlocks defeated. Avoid
exposure to beam.
FOR SAFE AND EFFICIENT OPERATION
- Do not damage the mains lead.
When not in use, disconnect the mains lead from the outlet. Grasp the plug, not the mains lead,
when disconnecting the unit.
- If water should enter the unit, electrical shock or a malfunction may result. Use in an area where
there is low humidity and little dust.
- Do not disassemble or alter the unit in any way.
。
- Do not use the unit in areas where extremes in temperature occur (below 5 C or exceeding
。
35 C), or where it may be exposed to direct sunlight.
- Because of the CD player's extremely low noise and wide dynamic range, there is a tendency
to turn the volume on the amplifier higher than necessary. Doing so may produce an
GB-1
-
-
excessively high output from the amplifier which can cause damage to your speakers. Please
be careful in this regard.
Sudden changes in the surrounding temperature can cause dew to form on the optical
pickup lens inside the unit. Under this condition the unit may be unable to operate properly.
If this should occur, remove the disc and allow the player to adjust to the surrounding
temperature.
This unit must be operated in a horizontal position.
Please use the original DVD or VCD or CD or MP3 software, and any copy discs are not
recommendable for use.
The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc;
No naked flame sources, such as lighted candles, should be placed on the apparatus;
It shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus;
Do not place the product in closed bookcases or racks without proper ventilation.
Where the mains plug or an appliance coupler is used as the disconnect device,
the disconnect device shall remain readily operable.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such
as sunshine, fire or the like.
Excessive sound pressure from earphones and headphones can cause hearing loss.
GB-2
POWER SUPPLY
There are two ways to supply power: AC power supply and Lithium battery power supply.
AC power operation
Connect one end of the mains lead to the DC ~IN socket and the other end to an AC outlet,
and set the POWER ON/POWER OFF select switch to POWER ON.
Lithium battery power supply
When the lithium battery be full charged, push the POWER ON/POWER OFF select switch to
POWER ON, the unit will start work.
Once you connect the unit to the AC outlet, the lithium battery will be charged. The indicator
light has been flashing during charge period.
GB-3
1
24
25
2
3
4
5
6
7
8
9
10
19
20
21
11
12
13
22
23
14
15
GB-4
16 17
18
THE FUNCTION PARTS OF THE UNIT
In CD/VCD play mode ,open or close PBC.
In DVD play mode, enter song play menu.
9. Volume- button
10. USB/SD card button
11. Volume+ button
12. Repeat button
13. Audio button
14. CD/VCD/DVD Compartment Lid
open button
15. indicator light:
In work state, indicator light display green,
in standby state, indicator light display red.
16. Mode button:
Enter display setup menu to set Brightness,
Contrast, Colar, FLIP, MODE, Reset.
17. Stop button
18. Pause/play button
19. SD/MMC card socket
20. AV OUT socket
21. COAXIAL socket
22. POWER ON/POWER OFF select switch
23. Phone socket
24. USB socket
25. DC~IN socket
1. TFT screen
2. Left button
In the menu interface , press the key to move
left the option, then press"OK" key to enter the
current location.
3. Upward/ Previous song button:
In the menu interface , press the key to move
up the option, then press"OK" key to enter the
current location.
In the CD/VCD/DVD play interface, press the
key to enter previous song
4. Right button
In the menu interface, press the key to move
left the option, then press"OK" key to enter the
current location.
5. OK button
6. Downward/ Next button
In the menu interface , press the key to move
down the option, then press"OK" key to enter
the current location.
In the CD/VCD/DVD play interface, press the
key to enter next song.
7. Setup button: Enter DVD setup menu.
8. Menu button:
GB-5
REMOTE CONTROL
1
2
3
4
6
5
7
8
11
13
15
17
19
21
23
25
27
29
9
10
12
14
16
18
20
22
24
26
28
30
1. STANDBY button
2. USB/CARD button
3. DISPLAY button
4. MUTE button
5. Number button
6. REPEAT button
7. A-B button
8. GOTO button
9. STOP button
10. TITLE button
11.SETUP button
12. VOL+ button
13. Upward button
14. ZOOM button
15. LEFT button
CAUTION
1.When using the remote controller ,make sure the
remote controller directly to the remote sink of the
unit ,and avoid operating in the 45°c and 5m range
having no any bar.
2.When the remote controller doesn't use ,change
the battery as right picture.
3.If the battery isn't used for a long time ,take out it .
16. VOL- button
17. OK button
18. RIGHT button
19. AUDIO button
20. PLAY/PAUSE button
21. Downward button
22. SUBTITLE button
23. Fast Recede button
24. Next song button
25. Fast forward button
26. Previous song Button
27. LCD-MODE button
28. MENU/PBC button
29. N/P button
30. PROG button
+
GB-6
INSTRUCTION TO KEYSTROKES OF REMOTE CONTROLLER
7. GOTO button:
Press this button enter into search interface,
such as:
1. Standby button: switch on/off the unit.
2. USB/CARD button: when insetr USB or
CARD, press this button to play song in the
USB or CARD.
3. Display button: display the information of
current song.
4. Mute: mute control
5. Repeat button:
Each press the REPEAT button will
change the repeat mode. During MP4/VCD/
CD playback, there are three modes: Repeat
single ,Repeat all and off. During DVD
playback, there are four modes: Repeat
chapter, Repeat Title, Repeat all and off.
Note: During VCD playback, the PCB mode
must be set to off.
6. A-B button:
Repeat play between A-B point for all discs.
1) Press "A-B" button once at the point where
repeat play is started. (“Rep A-” appears on
the TFT screen.)
2) Press "A-B" button again at the point where
repeat play is stopped. ("Rep A-B" appears on
the TFT screen)
3) To cancel, press "A-B" button again.
Search
Title
Chapter
Time
16
1
00:00:03
Press upward/downward button to move
high light bar to select item you desired, then
press left or right button to set the value, or
press number buttons to set the value.
8. Title button: press this button to display
disc's played title.
9. Stop button: stop play.
10. Setup button: enter into the DVD setup
interface.
11. Upward/Downward button: press the key
to move up/down the option, then press" OK "
button to enter the current location.
12. Left/Right button: press the key to move
left/right the option, then press "OK" button
to enter the current location.
GB-7
13. OK button: press to enter an item in the
menu or to confirm and execute a selection.
14. Zoom button: repeat this button in turn to
Q1,Q2,Q3, Q4, off.
15. Vol-/+: turn down/up the volume.
16. Audio button: enter into Audio setup
menu, repeat press this button to select left,
right and stereo audio.
17. Subtitle button: The button's function is
switch subject title in DVD disc play mode.
( One DVD disc has over 32 kind of language ).
18. Play/Pause button: Switch between Play
and Pause.
19.
Fast backward search button
20.
Fast forward search button
21.
Pre-view SKIP button
22.
Next-view SKIP button
23. LCD-MODE button: Enter display setup
menu to set Brightness,Cintrast,Color,Flip,
Mode,Reset.
24. N/P button: switch between PAL mode
and NTSC mode.
25. PROG button: press PROG button, enter
desired track in sequence by setting the
program play.
Press this button enter into program play
interface, such as:
When playing DVD:
GB-8
Program
1
2
3
......
......
......
......
......
......
Play
Clear program
When playing VCD:
Program
1
2
3
......
......
......
Play
Clear program
Press upward/downward/left/right button to
move high light to design point, then press
number button to set title and chapter which
you desired. Move the high light to “play”
after finishing the setup of the program play,
then press OK button, the unit will play the
DVD DISC in sequence according to the
program sequence you just do. If you want to
cancel the program play, move the high light
to “Clear program”, then press OK button.
Tip: When play DVD disc, you must input
title and chapter, and when play VCD, you
just only input chaper.
26. Menu:
In CD/VCD play mode ,open or close PBC.
In DVD play mode, enter song play menu.
GENERAL OPERATION
1. Connect one end of the mains lead to the
DC ~IN socket and the other end to an AC
outlet, the indicator light will display red.
2. Press the CD/VCD/DVD Compartment Lid
open button to open the Compartment Lid,
put the DISC in.
3. Set the POWER ON/POWER OFF select
switch to POWER ON, the indicator light will
display green, and the unit will automatically
play the DISC.
4. Press the Play/Pause button to pause the
play, press twice to resume play.
5. Press Stop button to stop the play.
6. Press power button to switch off the unit,
the indicator light will display red.
DVD PLAYING OPERATION
1. Open the unit, after inserting the disc ,
close the cover , then the unit will play
automatically.
(Press some invalid button, the screen will
show "not allowed at the moment". )
2. Title/Chapter Search
(1) Some discs will have many title, each title
will have many chapters. Press Title button
on the remote controller in playing, the screen
will show title.
(2) Press upward/downward/left/right button
to select expected title, then press “OK”
button to play.
GB-9
(3) Select playing tracks chapter with number
key "0-9" and "10+" (the entering number must
less than the total chapter number), then
press "ENTER" to play.
3. Previous and next
During playing, press " " " " button of the
remote controller, each time press the button,
jump a chapter to playing.
Press " ", playing from the next chapter;
press " ", playing from the previous chapter.
4. Fast forward and fast backward
(1)Press the " " button or " " button to
activate fast forward or fast backward function.
(2)Each time you touch the " ", the fast
forward speed goes from forward X2,
forward X4,forward X8, for ward X16 to normal
playback.
(3)Each time you touch the " ", the fast
backward speed goes from backward X2,
backward X4, backward X8,backward X16
to normal playback.
5. Pausing disc play
(1)Press the " " button to make the disc
pause.
(2)Press the " " button again to start
playing again.
6. Stopping playback
(1)Press the " " button once, stop playing,
press the button again to stop al l play backs
without last memory.
(2)Press the " " button to resume from
where it is stopped or start play.
7. Change the subtitle
This function only available when there are
two or more subtitle languages recorded in
the disc.
Press "SUBTITLE" button on the remote
controller while playing to change between
available subtitle languages. Repeatly press
the button, the subtitle language change
among English, Spanish, French, Chinese,
subtitle on, subtitle off.
Some discs record most 32 languages.
Please see most subtitle marks on the disc,
the number show how many languages had
recorded.
8. Switching the Audio Languages
This function only available when there are
two or more audio languages recorded in the
disc.
Press "AUDIO" button on the remote
controller, each time press it, you can switch
between available languages.
Some of disc can record 8 audios. Detailed
condition, please see language mark on the
disc. The number had showed the recorded
language.
The function may not work with some disc or
during some courses. It may require some
time to switch between audio language.
9. Repeat function
Press the “REPEAT” button on the remote
controller to repeat playing.
Press the first time, showing current repeat
mode, select repeat mode according to
pressing times, repeat mode is circle as below:
repeat All
repeat chapter
repeat title.
GB-10
10.Repeat segment
Press "A-B" button on the remote controller
to select expected playing segment,
the default is off.
Press once, the repeat begin from A
Press twice, the repeat end from B
Press third, close the repeat function.
11.Screen display playing status
When playing and then press "DISPLAY"
button on the remote controller, the screen
will display the playing status: title playing
time, title remainder time, chapter playing
time, chapter remainder time.
SETUP THE DVD MENU FUNCTION
(2) Subtitle
English
French
Spanish
German
Italian
Portuguese
Swedish
Chinese
Auto
Off
Press “SETUP” button on the remote
controller or the unit, the screen will show
setup menu. Press direction key (upward/
downward/lef/right button) to move the high
light and set the items, press OK button to
confirm. Press the “SETUP” button for the
second time, the unit will exit setup interface.
1. Language setting
(1) Language
English
French
Spanish
Deutsch
Italian
Portuguese
Swedish
中文
(3)DIVX subtitle
ASCII
Unicode
Turkish
Central European
Cyrillic
Chinese
GB-11
(4) Audio
English
French
Spanish
German
Italian
Portuguese
Swedish
Chinese
3. Audio setting
(1) Digital Output
Off
PCM
All
(2) Night Mode
Off
On
(3) Down sampling
Off
On
(4) Smart Sound
Off
classical
Rock
Jazz
Pop
(5) DVD menu
English
French
Spanish
German
Italian
Portuguese
Swedish
Chinese
4. Misc Setting
(1) Use Default Setting
Move the high light to the “Use Default
Settings”, then press OK button, it will show
“Do you want to use default setting?” you
can select yes or no.
(2) Screen saver
Off
On
(3) Enable
Off
On
2. Video setting
(1) Aspect Ratio
4:3 LB
4:3 PS
16:9
(2) TV System
NTSC
PAL
Auto
GB-12
VCD PLAYING OPERATION
After selecting the disc, the playing mode
auto form. The function whether or not work
according to some the story of the disc. If the
VCD disc with PBC function, it will start
playing after the menu screen displaying.
1. Title/Chapter playing (The disc must have
PBC function and the PBC is on)
When playing, press " Menu " button , the
screen will show title. Press number key "0-9"
and "10+" to select expected chapter (the
entering number must less than the total
chapter number).
2. Previous and next
During playing, press " " " " button of the
remote controller, each time press the button,
jump a chapter to playing.
Press " ", playing from the next chapter;
press " ", playing from the previous chapter.
3. Fast forward and fast backward
(1)Press the " " button or " " button to
activate fast forward or fast backward function.
(2)Each time you touch the " ", the fast
forward speed goes from forward X2,
forward X4, forward X8, for ward X16 to normal
playback.
GB-13
(3)Each time you touch the " ", the fast
backward speed goes from backward X2,
backward X4, backward X8,backward X16 to
normal playback.
4. Pausing disc play
(1)Press the " " button to make the disc
pause.
(2)Press the " " button again to start
playing again.
5. Stopping playback
(1)Press the " " button once, stop playing,
press the button again to stop al l play backs
without last memory.
(2)Press the " " button to resume from
where it is stopped or start play.
6. Repeat function
Press the “REPEAT” button on the remote
controller to repeat playing.
Press the first time, showing current repeat
mode, select repeat mode according to
pressing times, repeat mode is circle as
below: repeat single repeat all repeat off.
7. Repeat segment
Press "A-B" button on the remote controller
to select expected playing segment,
will display the playing status: Track, chapter
playing time, chapter remainder time.
9. Change the audio output
Press the “AUDIO” button when playing,
each time you press, the sound modes will
change in sequence. Switch among: Left,
Right, Mix, Stereo.
the default is off.
Press once, the repeat begin from A
Press twice, the repeat end from B
Press third, close the repeat function.
8. Screen display playing status
When playing and then press "DISPLAY"
button on the remote controller, the screen
JPEG PLAYING OPERATION
JPEG disc is formed by many lists, each list
has many JPEG pictures.
After selecting disc and play it, the unit will
auto play JPEC disc.
Press "Upward " or "Downward" or “Left” or
“Right” button on the remote controller to
select different picture.
Press " OK " button to play selected picture.
Press "left" button to return menu.
MP3/MP4 PLAYING OPERATION
1. MP3 is formed by many lists (folders ), each
list has many MP3 tracks.
After selecting disc and play it, the unit will
auto play MP3 mode.
Press " upward" or "downward" button to
select page.
Press "upward", "downward", " left " and "
right " button to select track.
Press " OK" to playing selected track.
Press "left" button to return folder.
GB-14
2. Fast forward and fast backward
(1)Press the " " button or " " button to
activate fast forward or fast backward function.
(2)Each time you touch the " ", the fast
forward speed goes from forward X2,
forward X4,forward X8, for ward X16 to
normal playback.
(3)Each time you touch the " ", the fast
backward speed goes from backward X2,
backward X4, backward X8,backward X16 to
normal playback.
3. Pausing disc play
(1)Press the " " button to make the disc
pause.
(2)Press the " " button again to start
playing again.
4. Stopping playback
(1)Press the " " button once, stop playing,
press the button again to stop al l play backs
without last memory.
(2)Press the " " button to resume from
where it is stopped or start play.
5. Repeat function
When playing, press “repeat” to select
repeat function. Press once to select a track
repeat; Press twice to select folder or dir
repeat; Press third to select repeat all disc;
Press four close.
Repeat mode: repeat " OFF " repeat " ONE "
repeat " DIR " repeat " ALL ".
6. Repeat segment
Press "A-B" button on the remote controller
to select expected playing segment, the
default is off.
Press once, the repeat begin from A
Press twice, the repeat end from B
Press third, close the repeat function.
7. Screen display playing status
When playing or stop, press " display "
button on the remote controller to show
current track playing time or remainder time.
CD PLAYING OPERATION
according to track number (if the track
number over the disc range, the input is
invalid ).
Eg: If you select twelfth track, press " 10+ "
first and then press " 2 " to select it.
2. Previous and next
During playing, press " " " " button of the
remote controller, each time press the button,
After selecting the disc and play it, the unit
will auto play CD (If press the button on the
unit or the remote controller without function,
the screen will show "not allowed at the
moment".
1. Select number to play at first hand.
Press number button " 0~9 " and " 10+ " on
the remote controller to select song
GB-15
jump a chapter to playing.
Press " ", playing from the next chapter;
press " ", playing from the previous chapter.
3. Fast forward and fast backward
(1)Press the " " button or " " button to
activate fast forward or fast backward function.
(2)Each time you touch the " ", the fast
forward speed goes from forward X2,
forward X4, forward X8, for ward X16 to
normal playback.
(3)Each time you touch the " ", the fast
backward speed goes from backward X2,
backward X4, backward X8,backward X16 to
normal playback.
4. Pausing disc play
(1)Press the " " button to make the disc
pause.
(2)Press the " " button again to start
playing again.
5. Stopping playback
(1)Press the " " button once, stop playing,
press the button again to stop al l play backs
without last memory.
(2)Press the " " button to resume from
where it is stopped or start play.
GB-16
6. Repeat playing
When playing, press “REPEAT” button to
select repeat playing function.
Press once, repeat playing the current track.
Press twice, repeat playing the current disc.
Press third times, close repeat playing
function.
Repeat mode: repeat " OFF " repeat " ONE "
repeat " ALL ".
7. Repeat segment
Press "A-B" button on the remote controller
to select expected playing segment, the
default is off.
Press once, the repeat begin from A
Press twice, the repeat end from B
Press third, close the repeat function.
8. Screen display playing
When playing, press "display " to show
round current track playing time, current
track remainder time, all disc playing time
and all disc remainder time.
USB/SD CARD PALY
Insert the USB or SD card to the USB socket or SD/MMC socket, press “USB/CARD” button on the
remote controller, the unit will read the information on the USB or SD card. The next steps as
operation DVD
SPECIFICATIONS
Compatibility:
DISC DVD/VCD/MP3
Mode: PAL/NTSC
Screen size: 7 inch
Power: 0.8Wx2
DC power supply: 12V, 1.5A
。
。
Work temperature: 5 C~ 35 C
Lithium Battery: 7.4V/1750mAh
Dimensions : 210x 164 x 41 mm
(W) x (H) x (D)
weight (approx) : 822.5g (excluding batteries)
Accessory: instruction book,
remote controller, AV cord, power adaptor,
power supply by car plug, assurance card.
Specifications subject to change without notice.
For Sales Information Please Contact
RoadTrucker Inc (www.RoadTrucker.com
8312 Sidbury Rd. Wilmington, NC 28411
(800) 507-0482 / (910) 686-4281
GB-17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising