Sony | DPP-F800 | User's Manual | Sony DPP-F800 User manual

4-208-449-13 (1)
Overview
Digital Photo
Printer/Frame
Using as a photo frame
Using as a printer
DPP-F800
Using various functions
Printing in various ways
Using with a computer
Troubleshooting
Operating Instructions
Before operating this unit, please read “Read This First” and
“About the Print Packs” supplied and this manual, “Operating
Instructions,” thoroughly and retain them for future reference.
Additional information
Owner’s Record
Printed using VOC (Volatile
Organic Compound)-free
vegetable oil based ink.
The model and serial numbers are located at the rear.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. DPP-F800
Serial No. ________________________
These models are not available in every country and region.
Printed in China
© 2010 Sony Corporation
Please read the supplied “Read This First”
and “About the Print Packs.”
WARNING
To reduce fire or shock hazard, do not
expose the unit to rain or moisture.
IMPORTANT SAFETY
INSTRUCTIONS
-SAVE THESE
INSTRUCTIONS
DANGER
TO REDUCE THE RISK
OF FIRE OR ELECTRIC
SHOCK, CAREFULLY
FOLLOW THESE
INSTRUCTIONS
If the shape of the plug does not fit the power outlet, use an
attachment plug adaptor of the proper configuration for the
power outlet.
Do not expose the batteries to
excessive heat such as
sunshine, fire or the like.
CAUTION
Replace the battery with the specified
type only. Otherwise, fire or injury
may result. Dispose of used batteries
according to the instructions.
For the customers in the U.S.A.
CAUTION
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
If you have any questions about this product, you may
call:
Sony Customer Information Services Center
1-800-222-SONY (7669)
The number below is for the FCC related matters
only.
2 GB
Regulatory Information
Declaration of Conformity
Trade Name:
Model No.:
Responsible Party:
Address:
SONY
DPP-F800
Sony Electronics Inc.
16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.:
858-942-2230
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Note:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
For the State of California, USA
only
Perchlorate Material - special handling may apply,
See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate.
For the Customer in Europe
This product has been tested and found compliant
with the limits set out in the EMC Directive for using
connection cables shorter than 3 meters (9.8 feet).
Attention
The electromagnetic fields at the specific frequencies
may influence the picture of this unit.
Notice
If static electricity or electromagnetism causes data
transfer to discontinue midway (fail), restart the
application or disconnect and connect the
communication cable (USB, etc) again.
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
This symbol on the product
or on its packaging indicates
that this product shall not be
treated as household waste.
Instead it shall be handed
over to the applicable
collection point for the
recycling of electrical and
electronic equipment. By
ensuring this product is
disposed of correctly, you
will help prevent potential
negative consequences for
the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. The recycling of materials will help to
conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Disposal of waste batteries
(applicable in the European Union
and other European countries with
separate collection systems)
human health which could otherwise be caused by
inappropriate waste handling of the battery. The
recycling of the materials will help to conserve
natural resources. In case of products that for safety,
performance or data integrity reasons require a
permanent connection with an incorporated battery,
this battery should be replaced by qualified service
staff only. To ensure that the battery will be treated
properly, hand over the product at end-of-life to the
applicable collection point for the recycling of
electrical and electronic equipment. For all other
batteries, please view the section on how to remove
the battery from the product safely. Hand the battery
over to the applicable collection point for the
recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic
Office, your household waste disposal service or the
shop where you purchased the product.
Notice for the customers in the
countries applying EU Directives
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo, 1080075 Japan. The Authorized Representative for EMC
and product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to
the addresses given in separate service or guarantee
documents.
NOTICE FOR CUSTOMERS IN
THE UNITED KINGDOM
A moulded plug complying with BS 1363 is fitted to
this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be
replaced, a fuse of the same rating as the supplied one
and approved by ASTA or BSI to BS 1362,
(i.e.marked with
or
mark) must be used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse cover
after you change the fuse. Never use the plug without
the fuse cover. If you should lose the fuse cover,
please contact your nearest Sony service station.
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not
be treated as household waste.
On certain batteries this symbol
might be used in combination with a
chemical symbol. The chemical
symbols for mercury (Hg) or lead (Pb) are added if
the battery contains more than 0.0005% mercury or
0.004% lead. By ensuring these batteries are disposed
of correctly, you will help prevent potentially
negative consequences for the environment and
Continued
3 GB
Duplication, edition, or printing of a CD, TV
program, copyrighted materials such as pictures or
publications, or any other materials except for your
own recording or creation is limited to private or
domestic use only. Unless you hold copyright or
have permission from copyright holders for the
materials to be duplicated, use of those materials
beyond this limit may infringe the provisions of the
copyright law and be subject to the copyright
holder’s claim for damages.
When using photo images with this unit, pay
special attention not to infringe the provisions of
the copyright law. Any unauthorized use or
modification of portraits may also infringe their
rights.
For some demonstrations, performances, or
exhibits, photography may be forbidden.
Backup recommendations
To avoid potential risk of data loss caused by
accidental operation or malfunction of this unit, we
recommend that you save a backup copy of your
data.
Information
IN NO EVENT SHALL SELLER BE LIABLE
FOR ANY DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES
RESULTING FROM ANY DEFECTIVE
PRODUCT OR THE USE OF ANY PRODUCT.
Sony shall assume no responsibility for any
accidental or consequential damages or loss of the
recorded content which may be caused by use or
malfunction of this unit or memory card.
Notes on LCD screen
• The displayed image on the screen is not identical in
picture quality and colors with the printed image
because display methods or profiles differ. This is
not a malfunction.
• Do not press against the LCD screen. The screen
may be discolored and that may cause a
malfunction.
• Exposing the LCD screen to direct sunlight for a
long period may cause malfunctions.
• The LCD screen is manufactured using extremely
high-precision technology, so over 99.99% of the
pixels are operational for effective use. However,
there may be some tiny black points and/or bright
points (white, red, blue or green in color) that
constantly appear on the LCD screen. These points
are normal in the manufacturing process and do not
affect the printing in any way.
• Images may trail across on the LCD screen in a cold
location. This is not a malfunction.
4 GB
Notice for users
Program © 2010 Sony Corporation
Documentation © 2010 Sony Corporation
All rights reserved. This manual or the software
described herein, in whole or in part, may not be
reproduced, translated or reduced to any machine
readable form without prior written approval from
Sony Corporation.
IN NO EVENT SHALL SONY CORPORATION BE
LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
WHETHER BASED ON TORT, CONTACT, OR
OTHERWISE, ARISING OUT OF OR IN
CONNECTION WITH THIS MANUAL, THE
SOFTWARE OR OTHER INFORMATION
CONTAINED HEREIN OR THE USE THEREOF.
By breaking the seal of the envelope of the CD-ROM
package, you accept all the terms and conditions of
this agreement. If you do not accept these terms and
conditions, please return this disk envelope unopened,
along with the rest of the package, immediately to the
dealer where you obtained it.
Sony Corporation reserves the right to make any
modification to this manual or the information
contained herein at any time without notice.
The software described herein may also be governed
by the terms of a separate user license agreement.
Any design data such as sample pictures provided in
this software cannot be modified or duplicated except
for the purpose of personal use. Any unauthorized
duplication of this software is prohibited under
copyright law.
Please note that unauthorized duplication or
modification of portraits or copyrighted work could
infringe the rights reserved by rights holders.
You may be referred to the supplied “Read This
First” and “About the Print Packs” when there are
detailed explanations in the leaflet.
5 GB
Table of Contents
Notice for users ..............................5
Before you start
Features ........................................10
How to use as a photo frame .......... 10
How to use as a printer .................. 11
You can even do this ..................... 11
Checking included items ...............12
Identifying the parts .....................13
About the information display ......16
Single view .................................... 16
Index view ...................................... 16
Let's get started
(basic operations)
Using as a photo frame
Preparing the remote control ........20
Rotating this unit ..........................21
Connecting to the AC power
source ..........................................22
Turning this unit on ......................23
Setting the current date and time .24
Inserting a memory card ..............25
Changing the display ....................26
Slideshow display .........................28
Clock and calendar display ...........29
Single view mode (single image
display) .........................................30
Index view ....................................31
Using as a printer
Preparation ...................................32
Setting this unit in the print
position (flat position) ..................32
6 GB
Setting the ink ribbon ...................33
Inserting the print paper ...............34
Basic printing ...............................36
Printing in single view mode ..........36
Printing in slideshow mode ............36
Try using various functions
(advanced operations)
Enjoying a slideshow ....................40
Changing the settings of the
slideshow .......................................40
Importing images from a memory
card to the internal memory .........42
Specifying the playback device .....44
Exporting an image from the
internal memory to a memory card
......................................................45
Deleting an image .........................46
Registering a mark .......................48
Sorting images (Filtering) .............49
Adjusting image size and
orientation ...............................50
Enlarging/reducing an image ..........50
Rotating an image ...........................51
Changing the settings of the auto
power on/off function ...................51
Enjoy various printing
(advanced printing)
Changing print settings
(Date Print,Borders,Pages Per
Sheet) ...........................................54
Performing “Creative Print”
(Calendar/Layout print/ID Photo) .55
Making a Calendar .........................55
Making a Layout print .....................57
Making an ID Photo ........................57
Editing an image .............................58
Adjusting an image quality .............59
Saving an image .............................59
Performing Batch Print (Index Print/
DPOF Print/Print All) .....................60
Changing the settings of
this unit
Changing the settings ...................61
Setting procedure ...........................61
Items to set .....................................63
Connecting to a computer lets you
do even more
Using with a computer
What you can do when connected to a
computer ......................................68
System requirements ......................68
Before connecting to a computer ..69
Connecting to a computer ............70
Selecting the function of this unit .70
Using the internal memory
of this unit
Copying an image from your
computer to this unit ....................71
Disconnecting your computer ......72
Printing from a commercially
available software application ........ 80
Troubleshooting
Error messages ............................84
If trouble occurs ...........................87
If the paper jams ...........................96
Cleaning ........................................97
Miscellaneous
About the Memory Cards ............100
“Memory Stick” media ................. 100
SD memory card .......................... 101
xD-Picture Card ........................... 101
Notes on using memory card ....... 102
Specifications .............................103
On trademarks and copyrights ..... 105
Precautions ................................105
On safety ...................................... 105
On installation .............................. 106
On cleaning .................................. 107
When disposing of this unit ......... 107
Index ..........................................108
Printing from a computer
Printing an image from your
computer ......................................73
Installing the software ..................73
Installing the printer driver .............73
Installing the PMB (Picture Motion
Browser) .........................................75
Printing photos from a computer .76
Printing from the PMB (Picture
Motion Browser) ............................76
Registering a browsing folder .........80
The illustrations in this manual may differ
slightly from the actual product.
7 GB
memo
8 GB
Before you start
Overview
9 GB
Overview
Features
As a photo frame or as a printer, you can use your Digital Photo Printer/Frame in
various ways.
The Sony digital photo printer/frame DPP-F800 displays your digital camera pictures on its screen
and prints your favorites, simply and without using a computer.
How to use as a photo frame
• Enjoy slideshows of your photos (page 40)
Single view
Multi image view
Clock view
Calendar view
Single view
Index view
• Enjoy various display styles (page 29~31)
Clock display
Calendar display
• Enjoy viewing sorted photos (page 49)
2010/12/31
Sort by folder
Sort by shooting date
• View photos in portrait or landscape
orientation (page 21)
10 GB
Sort by portrait/
landscape orientation
Sort by marks
• View photos for as long as you like
(page 51)
How to use as a printer
• Print a photo just as it looks (page 36)
Overview
• Print in various ways (page 54)
Print date
Print with/without border
Pages Per Sheet
• Create a calendar of your favorites, a Layout print or an ID photo (page 55)
Calendar
Layout print
ID photo
You can even do this
• Import images to the internal memory
(page 42)
• Connect to a computer to exchange or print
images (page 68)
You can import images from your memory
card to the internal memory.
• Export images (page 45)
You can export images from the internal
memory to your memory card.
11 GB
Checking included
items
Make sure that the following items are
included.
• Digital photo printer/frame (1)
• Remote control (1)
• AC Adaptor (1)
• Cleaning cartridge (1)
• Cleaning sheet (1)
• CD-ROM (Windows Printer Driver Software
Ver.1.0 and PMB (Picture Motion Browser)
Ver.5.2) (1)
•
•
•
•
Operating Instructions (this booklet) (1)
Read This First (1)
About the Print Packs (1)
Warranty (In some regions, the warranty is
not supplied.) (1)
• Sony End User Software License Agreement
(1)
*1 The plug shape and specifications of the power
cord differ depending on the region in which you
purchased this unit.
About Sony Print Packs (sold
separately)
• Power cord*1 (1)
Please use a Sony optional color print pack
designed for this unit. You cannot use other
print packs.
About the supplied power cord
• Paper tray (1)
12 GB
The supplied power cord is for exclusive use
with this unit and cannot be used with other
electrical devices.
Identifying the parts
For details, see the pages indicated in the parentheses.
Front
Overview
Remote sensor
LCD screen
Sony logo (. page 23)
Continued
13 GB
Rear
Direction (B/b/v/V) buttons
MENU button
PRINT button
VIEW MODE button (. page 26)
BACK button
ENTER button
1 (on/standby) button/Standby
indicator
DC IN 24V jack (. page 22)
Paper outlet (. page 35)
Memory Card slot
(. page 25)
Access lamp
USB B connector (. page 70)
Ink ribbon compartment door
Paper tray
compartment door
Ink ribbon
compartment door
14 GB
Remote control
VIEW MODE buttons
(.page 26)
SLIDESHOW (
(.page 26)
SINGLE button
(.page 26)
) button
MENU button
Direction (B/b/v/V)
buttons
1 (on/standby) button
INDEX (
) button
(.page 26)
Zoom in ( ) button
(.page 50)
ENTER (
BACK button
MARKING (
) button
(.page 48)
SORT button
(.page 49)
ROTATE (
) button
(.page 51)
Overview
CLOCK (
) button
(.page 26)
) button
Zoom out ( ) button
(.page 50)
IMPORT (
) button
(.page 42)
DELETE (
) button
(.page 46)
SELECT DEVICE button
(.page 44)
PRINT button
About descriptions in this manual
The operations described in this manual are based on remote control operation. When an
operation is performed differently, for example, with the remote control and the buttons on this
unit, it will be explained in a tip.
15 GB
About the information display
Single view
Index view
The following information is shown.
Items
Description
1
Display type
The name of the view style is displayed.
Single view
• Entire image
• Fit to screen
• Entire image (with Exif)
• Fit to screen (with Exif)
Index view
• Index1
• Index2
• Index3
2
Image no./Total no.
of images
The number of the displayed image and the total number of images
are shown.
3
Device information
An icon is shown indicating the media from which the displayed
image is input.
•
(Internal memory)
•
(“Memory Stick”)
•
(SD Memory Card)
•
(xD-Picture Card)
4
Ink ribbon type
The type of installed ink ribbon is shown.
• P (P size)
• C (Cleaning cartridge)
16 GB
Description
Image information
Detailed information of the image is shown.
• File format (JPEG (4:4:4), JPEG (4:2:2), JPEG (4:2:0), BMP,
TIFF
• Number of pixels (width × height)
• Manufacturer of the image input device
• Model name of the image input device
• Shutter speed (e.g.: 1/8)
• Aperture value (e.g.: F2.8)
• Exposure value (e.g.: +0.0EV)
• Rotation information
6
Setting information
Setting information is shown.
•
(Protection information)
•
(Associated file information)
(Shown when an associated file such as a small-size image file
for email or a video clip exists.)
•
(Shown when a mark is registered.)
•
DPOF
(Shown if an image has a print job request set in DPOF (Digital
Print Order Format).)
7
Image number
(Folder-File
number)
Shown if an image is DCF compliant. If not, a file name is shown.
The file name may differ from the one that is shown on your
computer.
8
Shooting date/time
The date and time when the displayed image was shot is shown.
9
Guide message
Operating guide is shown.
0
Set No. of prints
No. of prints set is shown.
qz
Print setting
information
The print settings of print date, border and layout print are shown
(Only when in the print position (page 32)).
•
(Date Print ON)
•
(Print date and time ON)
•
(With border 1 ON)
•
(With border 2 ON)
•
(Pages Per Sheet 4 ON)
•
(Pages Per Sheet 9 ON)
•
(Pages Per Sheet 16 ON)
qs
Scroll bar
The scroll bar indicates the location of a selected image among all
images or among sorting results (page 49).
qd
Cursor
You can move the cursor to select an image with B/b/v/V.
17 GB
Overview
Items
5
memo
18 GB
Let's get started
(basic operations)
Using as a photo frame
Using as a printer
19 GB
Using as a photo frame
Preparing the remote
control
The supplied lithium battery (CR2025) has
already been inserted into the remote control.
Pull out the protective sheet before use as
shown in the figure.
Replacing the battery of the
remote control
If the remote control stops working, replace the
battery (CR2025 lithium battery) with a new
one.
1
Press the tab in.
2
Pull the battery holder out.
Protective sheet
Using the remote control
Point the top end of the remote control towards
the remote sensor on this unit.
Remote
sensor
3
Insert a new battery and slide the
battery holder back into the remote
control.
Insert the battery so that “+” is facing
upwards.
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
Notes
• When the lithium battery becomes weak, the
operating distance of the Remote control may
shorten, or the Remote control may not function
properly. In this case, replace the battery with a
Sony CR2025 lithium battery. Use of another
battery may present a risk of fire or explosion.
• Using a battery other than the specified one may
result in the battery rupturing.
20 GB
• Dispose of used batteries as specified by the local
authorities.
• Do not leave the remote control in a very hot and
humid place.
• Take care that no foreign objects get inside the
remote control when you, for example, replace the
battery.
• Incorrect use of the battery may cause leaking and
corrosion.
Rotating this unit
Setting to portrait or landscape
orientation
You can set this unit to portrait or landscape
orientation by rotating it.
– Do not recharge the battery.
– Incorrectly inserting, shorting, dismantling, or
heating the battery, or throwing it into a fire
may cause the battery to rupture or leak.
When you place this unit vertically, the image
on the display automatically rotates to the
portrait position.
Continued
21 GB
Using as a photo frame
– When the remote control will not be used for a
long period of time, remove the battery from the
remote control to prevent leaking and corrosion.
Notes
• Check whether this unit is stable. If the unit is not
set properly, it may fall over.
• The Sony logo does not light up when this unit is
placed vertically or turned off.
• You can also rotate the image manually. (page 51)
• To print a picture, set this unit in the print position
(flat position) (page 32).
Connecting to the AC
power source
1
2
Insert the plug of the AC Adaptor
into the DC IN 24V jack on the back
of this unit.
Connect one plug of the power cord
to the connector of the AC Adaptor
and the other plug to the wall outlet.
This unit automatically turns on.
AC Adaptor
Power cord
To the wall
outlet
A socket outlet should be as close as possible to
the unit and easily accessible.
Notes
• Do not place this unit in an unstable location such as
on a wobbly table.
• Connect the AC Adaptor to an easily accessible
wall outlet close by. If trouble occurs while using
the adaptor, immediately shut off the power by
disconnecting the plug from the wall outlet.
• Do not short the plug of the AC Adaptor with a
metallic object, as this may cause a malfunction.
22 GB
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• When not in use, remove the AC Adaptor from the
DC IN 24V jack of this unit and the power cord
from the wall outlet.
• This unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the printer itself has been turned off.
To use this unit abroad - Power
sources
When you have already turned on this unit in
the previous section, skip to the next section.
Turning on the power
Press 1 (on/standby) on this unit or remote
control to turn on the power. The standby
indicator turns to green from red. The Sony
logo on the front panel lights up.
Using as a photo frame
You can use this unit and the AC Adaptor
(supplied) in any country or region where the
power supply is within 100 V to 240 V AC,
50Hz/60Hz.
Do not use an electronics transformer (travel
converter), as this may cause a malfunction.
Turning this unit on
Turning off the power
Hold 1 (on/standby) on this unit or remote
control until the power turns off. The standby
indicator on this unit turns from green to red
and this unit enters standby mode.
Notes
Do not disconnect the AC Adaptor from the wall
outlet or DC IN 24V jack before the standby indicator
turns red. Doing so may damage this unit.
Continued
23 GB
Operations in an initial state
When this unit is turned on without a memory
card inserted, the initial display below appears
on the screen.
Setting the current date
and time
1
2
Press MENU.
Press B/b to select the
(Settings) tab.
Tips
You can only use the B/b buttons when the
clock and calendar settings item (page 29) is not
selected.
3
If this unit is not operated for 10 seconds, the
demo mode is displayed. If any other button
than the power button is pressed, the screen
returns to the initial display.
First, press MENU during the initial display,
and then set the current date and time. (See next
section)
4
Press v/V to select [Date/time
Settings] and then press
.
Adjust the date.
1 Press v/V to select [Date] and then
press
.
2 Press B/b to select year, month, and
day, and then press v/V to select a
value, then press
.
5
Adjust the time.
1 Press v/V to select [Time] and then
press
.
2 Press B/b to select hour, minute, and
second, and then press v/V to select a
value, then press
.
6
Select the format of the date.
1 Press v/V to select [Date Display Order]
and then press
24 GB
.
2 Press v/V to select a format and then
press
.
• Y-M-D
• M-D-Y
• D-M-Y
7
Set the day to start the week for the
calendar.
8
Insert the memory card firmly into the
corresponding slot with its label side
facing toward you (when you are facing
the back side of this unit).
The access lamp flashes when the memory card
is inserted correctly. Reinsert the memory card
after checking the label side of the memory
card if the access lamp does not flash.
Select the time display.
“Memory Stick Duo”
(Slot B)
1 Press v/V to select [12hr/24hr display]
and then press
.
2 Press v/V to select [12 hours] or
[24 hours] and then press
.
9
Press MENU.
“Memory
Stick”(Slot A)
The menu screen is closed.
SD
memory
Card
(Slot A)
xD-Picture Card
(Slot A)
Access lamp
Notes
• When using a miniSD/SDHC 1, microSD/
SDHC 2 or “Memory Stick Micro” media 3,
be sure to insert it in an appropriate adaptor.
1
2
3
Continued
25 GB
Using as a photo frame
You can set the day that appears on the
very left when the calendar is displayed.
1 Press v/V to select [First day of the
week] and then press
.
2 Press v/V to select [Sunday] or
[Monday] and then press
.
Inserting a memory card
For details on compatible memory cards, see
pages 100 to 102. For supported file formats,
see page 103.
When you insert a memory card
When you insert a memory card, the images on
it are automatically displayed. If you switch off
the power while they are being displayed and
then switch the power back on, the same
images continue to be displayed.
Changing the display
You can change the view style by pressing the
VIEW MODE buttons.
1
Press the button corresponding to
view mode you want to select.
VIEW MODE buttons
Notes
• In clock and calendar display, change to
“Slideshow”, “Single image display” or “Index”
(See next section).
To change the playback device
Press the SELECT DEVICE (page 44).
To remove a memory card
Remove the memory card from its slot in the
opposite direction from which it was inserted.
Do not remove the memory card while the
access lamp is flashing.
The display changes to selected view
mode.
1
Slideshow
(page 28)
2
Notes
• The slot is both a “Memory Stick” standard and
Duo size compatible slot, so you do not need a
“Memory Stick” adaptor.
• The “Memory Stick” (Standard/Duo)/SD memory
card/MMC/xD-Picture Card multi-purpose slot
automatically detects the card type.
Clock and
calendar
(page 29)
3
Single view
(page 30)
4
Index
(page 31)
Tips
• When using the buttons on this unit, press
VIEW MODE on the upper back of the
LCD screen, press V to move the cursor to
the display selection area and press B/b to
select a display.
26 GB
• You can also repeatedly press VIEW
MODE on this unit, move the cursor within
the display selection area and select any
view mode.
Display selection area
Using as a photo frame
Style selection area
2
Select a style with B/b/v/V and
press
.
The display changes to the selected view
style.
Tips
• If the cursor is in the display selection area,
move it to the style selection area by
pressing v.
• You can move it within the style selection
area by pressing the button corresponding
to currently selected view mode
,
,
or
or
VIEW MODE on this unit repeatedly.
Notes
• If you do not operate this unit for a certain
period of time, the style indicated by the
cursor is automatically selected.
27 GB
Slideshow display
Display
Style
Description
Images are displayed on a single screen, one after another.
Slideshow
Single view
Displays multiple images at the same time.
Multi image view
Displays images, one after another, while showing the present
date and time.
Clock view
Displays images, one after another, while showing a calendar.
The present date and time is shown.
Calendar view
Displays images, one after another, while showing the
shooting date and time. The present date and time is not
shown.
Time Machine
Random view
Displays images while randomly switching between a
number of different slideshow styles and effects.
When displaying images in random order
You can do this if [Shuffle] in [Slideshow Settings] is set to
[ON]. (Page 41)
Tips
• You can set the interval, effect, listing order, or color effect when you select the slideshow display. Refer to
“Changing the settings of the slideshow” (page 40).
• If you press
during slideshow, the display changes to single view mode.
• If you turn this unit off during slideshow and back on, the slideshow restarts from the last image viewed.
28 GB
Clock and calendar display
Clock2
Clock3
Clock4
Clock5
Clock6
Clock7
Clock8
Clock9
Clock10
Calendar2
Calendar3
Clock11
Calendar1
Lunar Calendar
(when you select
[Simplified
Chinese] in
[Language
Setting])
Arabic calendar
Farsi calendar
(when you select
(when you select
[Arabic] in
[Persian] in
[Language setting]) [Language setting])
Notes
• Only the
(Settings) tab is available in the clock and calendar display mode.
29 GB
Using as a photo frame
Clock1
Single view mode (single image display)
Display
Style
Description
Displays an entire image in the screen.
You can switch the images to be displayed by pressing B/b.
Entire image
Displays an image over the whole screen.
(Depending on the aspect ratio of the recorded image, the
border of the image may only be partially displayed.)
You can switch the images to be displayed by pressing B/b.
Fit to screen
Entire image (with
Exif)
Fit to screen (with
Exif)
30 GB
Displays image information, such as the image number, file
name, and shooting date while displaying the entire image.
You can switch the images to be displayed by pressing B/b.
Refer to “About the information display” (page 16) for details
on the image information.
Displays image information, such as the image number, file
name, and shooting date in fit to screen mode.
(Depending on the aspect ratio of the recorded image, the
border of the image may only be partially displayed.)
You can switch the images to be displayed by pressing B/b.
Refer to “About the information display” (page 16) for details
on the image information.
Index view
Display
Style
Description
Displays a list of large thumbnails. You can select an
image by pressing B/b/v/V.
Index
Index1
Index2
Displays a list of small thumbnails. You can select an
image by pressing B/b/v/V.
Index3
Tips
• A thumbnail is a small-sized image for index use that is recorded in the pictures taken by a digital camera.
• You can select the single view mode when you press
when the image you want appears in the index image
display.
31 GB
Using as a photo frame
Displays a list of thumbnails. You can select an image by
pressing B/b/v/V.
Using as a printer
Preparation
To use this unit as a printer, do the following.
Prepare the remote control (page 20).
Connect the AC power source (page 22).
Set this unit in the print position (flat position)
(see next topic).
Set an ink ribbon (page 33).
Set some print paper (page 34).
Turn this unit on (page 23).
• For details of the remote control and AC
power source, see “Using as a photo frame.”
(page 20)
Setting this unit in the
print position
(flat position)
To use this unit as a printer, do the following.
1
2
Lay this unit flat (print position) and
open the paper tray compartment
door.
Tilt the display up.
2
1
32 GB
Setting the ink ribbon
1
2
Insert the ink ribbon in the direction
of the arrow until it clicks into place.
Using as a printer
3
Pull and open the ink ribbon
compartment door.
Notes
• Do not touch the ink ribbon or store the ink ribbon
in a dusty location. Fingerprints or dust on the ink
ribbon may result in imperfect printing.
• Do not rewind the ink ribbon and use the rewound
ink ribbon for printing. Otherwise, proper printing
results will not be obtained, or a malfunction may
occur. If the ink ribbon does not click into place,
remove it and then re-insert it. Only when the ink
ribbon is too slack to be loaded, keep pressing the
core of the ribbon and wind the ink ribbon in the
direction of the arrow to remove the slack.
Close the ink ribbon compartment
door.
Removing the ink ribbon
Push up the blue eject lever, and remove
the used ink ribbon.
Do not wind the ribbon in the
directions shown here.
•
•
•
•
Do not disassemble the ink ribbon.
Do not pull out the ribbon from the ink ribbon.
Do not remove the ink ribbon while printing.
Notes on storing printing packs
Avoid placing the printing pack in locations that
are subject to high temperature (more than 30 °C/
86° F), high humidity, excessive dust or direct
sunlight.
Please store it in a cool and dark place and use it
within a short period from the date of production.
Depending on the storage conditions, the ink
ribbon may deteriorate. Use of such an ink ribbon
may affect the printed results, for which we cannot
guarantee or compensate.
33 GB
Inserting the print paper
1
Front surface
Open the paper tray cover.
Hold the parts on both sides of the paper
tray cover (shown with arrows) and open
the paper tray cover.
Rear surface
2
3
Close the paper tray cover.
4
Open the slide cover.
Set the print paper in the paper tray
with the print surface facing up.
Front surface
Make sure the print paper is not upside
down.
34 GB
Notes
• You can set up to 20 sheets of print paper. Riffle
the print paper thoroughly. Insert the print paper
with the protective sheet facing up. Remove the
protective sheet from the tray.
• If there is no protective sheet, insert the print paper
into the paper tray with its printing surface (the
side with no imprint) facing up.
• Do not touch the printing surface. Fingerprints or
contamination on the printing surface may result in
imperfect printing.
• Do not bend the print paper, or cut the print paper
from the perforations before printing.
• To avoid paper jam or malfunctions of this unit,
make sure of the following before printing:
5
Insert the paper tray into this unit.
– Do not write or type on the print paper.
– Do not attach a sticker or stamps on the print
paper.
– When adding print paper to the paper tray, be
sure that the total number of print paper sheets
does not exceed 20 sheets.
– Do not insert different types of print paper
together into the paper tray.
– Do not print on used print paper. Printing an
image twice on the same paper will not make
the printed image thicker.
– Use the print paper for this unit only.
• To store print paper in the tray, remove the paper
tray from this unit and close the slide door of the
paper tray.
• Avoid storing the paper with the printed faces
touching each other or in contact with rubber or
plastic products, including vinyl chloride or
plasticizer for an extended period of time; color
changes or deterioration of the printed image may
occur.
• Avoid placing the print paper in a location subject
to high temperatures, high humidity, excessive
dust or direct sunlight.
• When you are going to store partially-used print
paper, store it in its original bag or a similar
container.
Before printing
The paper outlet opens automatically when this
unit is placed in the print position (when laid
flat), but you should make sure it is fully open
before printing.
Leave enough room around this unit. The print
paper emerges from the back a few times
during printing. Keep 11 cm (4 3/8 inches) or
more space at the rear of this unit.
To the wall
outlet
AC Adaptor
Power cord
11 cm (4 3/8
inches) or
more
Movement of print paper
35 GB
Using as a printer
– Do not use print paper ejected without printing.
Notes on storing the print paper
Basic printing
This section explains how to display the images
of a memory card or internal memory on this
unit’s LCD screen and print the selected
images (direct printing).
To print an image from the connected
computer, see “Printing an image from your
computer” (page 73).
Printing in single view mode
1
2
Press 1 (on/standby) to turn this
unit on.
Tips
• If you press PRINT in index view mode (page 31),
the image indicated by the cursor and ones you set
the No. of prints will be printed.
• To print an index page, see “Performing Batch
Print” (page 60).
Printing in slideshow mode
You can print directly from a slideshow screen
that is being displayed.
1
2
Change the display to single view
mode.
4
Press B/b to display the image that
you want to print.
5
3
Press PRINT.
Printing starts.
The images are printed with the quantity
set in step 4.
To print multiple images
Repeat steps 3 and 4.
To change the print quantity
Display the image whose print quantity you
want to change and press
to set the print
quantity. If you select "0," printing is canceled.
36 GB
Press PRINT.
The print preview screen is displayed.
Set the No. of prints.
When making one print of the displayed
image, skip this step and go on to step 5.
If you press the
button when an image
is displayed in single view mode,
appears at the bottom right of the screen.
Press v/V to set the No. of prints and press
. The display returns to single view
mode and the set No. of prints is
displayed.
Change the display to slideshow
mode.
For changing the display, see "Changing
the display" (page 26).
Press B/b to select the image that you
want to print.
For changing the display, see “Changing
the display” (page 26).
3
Press 1 (on/standby) to turn this
unit on.
4
Set the No. of prints.
If you press the
button when the print
preview screen is displayed,
appears at the bottom right of the screen.
Press v/V to set the No. of prints and press
. The display returns to the print
preview screen and the set No. of prints is
displayed.
5
Press PRINT.
Printing starts.
The image displayed on the print preview
screen is printed.
Notes
Using as a printer
• You cannot print in clock and calendar display.
• Never move or turn off this unit while it is printing;
the ink ribbon may become stuck or paper jam may
occur. In case you turn off the power, keep the
paper tray inserted and turn on this unit. After the
paper is ejected, resume printing.
• Do not remove the paper tray during printing.
Otherwise, malfunction may occur.
• The print paper emerges a few times during
printing. Do not touch nor pull the emerged paper.
• If print paper is jammed, see page 96.
• Date Print/Borders/Pages Per Sheet can only be
printed in single image display mode (page 54).
37 GB
memo
38 GB
Try using various
functions
(advanced
operations)
Using various functions
39 GB
Enjoying a slideshow
1
Press
(Slideshow).
Tips
• When using the buttons on this unit, press
VIEW MODE on the upper back of the
LCD screen, press V to move the cursor to
the display selection area and press B/b to
select
(Slideshow).
Changing the settings of the
slideshow
1
2
3
Press MENU.
Press B/b to select the
(Settings) tab.
Press v/V to select [Slideshow
Settings] and then press
.
• When the cursor is in the display selection
area, move it to the style selection area with
v.
• When the cursor is in the style selection
area, you can move it by pressing VIEW
MODE repeatedly.
Display selection area
4
Press v/V to select the item and
then press
.
Refer to the tables on the next page for
details on the setting items.
Notes
Style selection area
2
Press B/b/v/V to select the style you
want, then press
.
• Note the following when you select a slideshow
using the image stored on the memory card.
– Due to the characteristics of memory cards,
frequent reading can lead to errors and images
may not be displayed correctly.
– Do not run a slideshow for a long time with a
small number images. This may cause data
error.
– We recommend you back up images on the
memory card often.
• When this unit is, for instance, displaying a
slideshow, changes to the settings of some items are
unavailable. These items are shown in gray and
cannot be selected.
Refer to “Slideshow display” (page 28)
for details on the slideshow styles.
40 GB
• The slideshow starts from the first image if you turn
off this unit, or if you reset this unit.
• When the screen is too bright, it may make you feel
nauseous. Be careful that you do not make the
brightness settings too bright when you use this
unit.
*: Factory default settings
Item
Setting
Description
Slideshow
Settings
Interval
Set a value from 3 sec., 7 sec.*, 20 sec., 1 min., 5 min., 30 min., 1 hour,
3 hours, 12 hours, 24 hours for the interval between images.
Notes
• An image may not switch at the intervals you set on the menu,
depending on the style of the slideshow or the size of the image.
Effect
Color effect
Display Mode
Transitions to the next image as though the previous
image is being pushed from the center to the four
corners.
Vert. blinds
Transitions to the next image as though blinds are
being lowered vertically.
Horiz. blinds
Transitions to the next image as though blinds are
being pulled horizontally.
Fade*
Transitions to the next image by fading out the current
image and fading in the next image.
Wipe
Transitions to the next image as though the current
image is being wiped off the screen to reveal the next
image.
Random
Uses the above five effects randomly.
ON
Displays images randomly.
OFF*
Cancels shuffle playback.
Color*
Displays an image in color.
Sepia
Displays an image in a sepia color.
Monochrome
Displays an image in monochrome.
You can select the display size of the slide image.
Notes
• The original image data will not change.
Entire image*
Displays an entire image enlarged to proper size. (An
image may be displayed with margins on the top,
bottom, left and right.)
Fit to screen
Zooms in at the center of the image enough to fill the
whole screen.
Notes
• An image may not display with the display size you
set on the menu, depending on the style of the
slideshow.
41 GB
Using various functions
Shuffle
Center cross
Slideshow display
Importing images from a
memory card to the
internal memory
You can use this unit as a digital album, saving
important images in the internal memory.
Tips
• When saving images to the internal memory, you
can use [Image import size] in the menu to preset
whether to resize images to the optimum size or
save them as they are without compressing them
(page 64).
When [Image import size] is set to [Resize], up to
approx. 500 images can be imported to the internal
memory. When set to [Original], the number of
images that can be saved may vary, depending on
the original image file size.
1
Press
(Import) when an image
stored on the memory card is
displayed on the screen.
Tips
• If using the buttons on this unit, press
MENU, select the
(Editing) tab with
B/b, select [Import] with v/V, and press
.
Single view mode
(Single image display)
42 GB
Index image display
2
Press v/V to select [Import this
image], [Import multiple images] or
[Import all images] and then press
.
If you select [Import this image], the
image currently displayed is imported to
the internal memory. Go to step 5. (This
item cannot be selected on the slideshow
display.)
If you select [Import multiple images],
you can select the image you want to
import from the image list. Go to step 3.
If you select [Import all images], the
image list is displayed. A check mark is
attached to the check box of all the
images. Go to step 4.
3
Use B/b/v/V to select the image
from the image list to be imported
and press
.
“✔” is added to the selected image.
If you want to import multiple images
at a time, repeat this step.
Tips
• A new folder is created automatically when
you select [New folder].
6
Press v/V to select [Yes] and then
press
.
The image is saved in the specified folder
in the internal memory.
7
Press
when the confirmation
screen is displayed.
Notes
4
– Turning off the power
– Removing an memory card
– Inserting another card
Tips
You can change the thumbnail size using [ / ] in
the image list.
Press MENU.
The confirmation screen used for selecting
a folder is displayed.
5
Press v/V to select the folder you
want and press
.
The confirmation screen used to decide
whether to import an image or not to the
internal memory is displayed.
43 GB
Using various functions
If you want to clear the selection, select
the image and press
. “✔” disappears
from the image.
About image sorting in the image list
During a sort:
Lists all images that meet the sorting
criteria.
Not during a sort:
Lists all images in the device that contains
the image currently displayed.
Refer to “Sorting images (Filtering)”
(page 49).
• “Import to the internal memory” is not available for
images in the internal memory.
• Avoid doing the following while images are being
imported to the internal memory. Doing so may
damage this unit, memory card, or the data:
Specifying the playback
device
You can specify whether to display a memory
card or the internal memory.
1
Press SELECT DEVICE.
Tips
• When operating from the main unit, press
the MENU and use the B/b buttons to
select the
(Select device) tab.
• If the memory card you want to select is
not inserted, insert it now.
Notes
• During clock and calendar display, you
cannot select the
(Select device) tab.
2
Press v/V to select a device to
display the image and press
.
The images of the selected device are
displayed.
44 GB
Exporting an image from
the internal memory to a
memory card
5
“✔” is added to the selected image.
If you want to export multiple images at a
time, repeat this step.
If you want to clear the selection the
image, select the image and press
.
“✔” disappears from the image.
About image sorting in the image list
During a sort:
You can export the images in the internal
memory to a memory card.
1
2
3
Press MENU when an image stored
on the internal memory is displayed
on the screen.
Press B/b to select the
tab.
Lists all images that meet the sorting
criteria.
Not during a sort:
Lists all images in the internal memory.
Refer to “Sorting images (Filtering)”
(page 49).
(Editing)
Press v/V to select [Export] and
then press
.
6
The screen used for selecting the memory
card to which to export is displayed.
7
4
Press v/V to select [Export this
image], [Export multiple images] or
[Export all images] and then press
.
If you select [Export this image], the
image currently displayed is exported to
the device. Go to step 7. (This item cannot
be selected on the slideshow display.)
If you select [Export multiple images],
you can select the image you want to
export from the image list. Go to step 5.
If you select [Export all images], the
image list is displayed. A check mark is
attached to the check box of all the
images. Go to step 6.
Press MENU.
8
Press v/V to select a memory card
to export the image to and press
.
Press v/V to select a destination
folder and press
.
The confirmation screen used to decide
whether to export or not is displayed.
Continued
45 GB
Using various functions
Single view mode
(Single image display)
Use B/b/v/V to select the image
from the image list to be exported
and press
.
Tips
If you select [New folder], a new folder is
created automatically .
9
Press v/V to select [Yes] and then
press
.
Deleting an image
1
The exporting is finished.
Tips
10 Press
when the confirmation
screen is displayed.
• If using the buttons on this unit, press
MENU, select the
(Editing) tab with
B/b, select [Delete] with v/V, and press
.
The image is copied to the specified
memory card.
Notes
Press
(Delete) when an image
is displayed on the screen.
2
• Avoid doing the following while an image is being
exported. Doing so may damage this unit, memory
card, or the data:
Press v/V to select [Delete this
image], [Delete multiple images] or
[Delete all images] and then press
.
If you select [Delete this image], the
image currently displayed is deleted. Go
to step 5. (This item cannot be selected on
the slideshow display.)
If you select [Delete multiple images], you
can select the image you want to delete
from the image list. Go to step 3.
If you select [Delete all images], the
image list is displayed. A check mark is
attached to the check box of all the
images. Go to step 4.
– Turning off the power
– Removing an memory card
– Inserting another card
Tips
• You can also use the MENU button on this unit.
• You can change the thumbnail size using [ / ] in
the image list.
• Any memory card that is not recognized by this unit
is shown in gray and you cannot select it.
3
Use B/b/v/V to select the image
from the image list to be deleted and
press
.
“✔” is added to the selected image.
If you want to delete multiple images at a
time, repeat this step.
If you want to clear the selection, select
the image and press
. “✔” disappears
from the image.
About image sorting in the image list
During a sort:
Lists all images that meet the sorting
criteria.
Not during a sort:
Lists all images in the memory card that
contains the image currently displayed.
46 GB
Refer to “Sorting images (Filtering)”
(page 49).
4
Notes
• Avoid doing the following while an image is being
deleted. Doing so may damage this unit, memory
card, or the data:
Press MENU.
The delete confirmation screen is
displayed.
5
– Turning off the power
Press v/V to select [Yes] and then
press
.
The image is deleted.
6
Press
when the confirmation
screen is displayed.
To format the internal memory
Press MENU.
4
Press v/V to select [Format internal
memory] and then press
.
The confirmation screen used for
initializing the internal memory is
displayed.
5
Press v/V to select [Yes], then press
Press B/b to select the
(Settings) tab.
Press v/V to select [Initialize] and then
press
.
– Inserting another card
• When the message [Cannot delete a protected file.]
appears on the screen, the image file was set to
Read Only on a computer. In this case, connect this
unit to a computer, and delete this file using the
computer.
• The total capacity of the internal memory is not
equal to the remaining capacity, even immediately
after initialization.
• If deletion has started, the deleted image cannot be
recovered even if you stop deletion. Delete images
only after confirming you actually want to delete
them.
Tips
• You can change the thumbnail size using [ / ] in
the image list.
.
47 GB
Using various functions
1
2
3
– Removing an memory card
Registering a mark
4
“✔” is added to the selected image.
If you want to mark multiple images at a
time, repeat this step.
If you want to clear the selection, select
the image and press
. “✔” disappears
from the image.
About image sorting in the image list
During a sort:
You can produce a slideshow only with images
which have been selected beforehand and have
been marked. You can easily check for images
with marks using the index image display or
single view mode (with Exif).
1
Press
(Marking) when an image
is displayed on the screen.
Lists all images that meet the sorting
criteria.
Not during a sort:
Lists all images in the memory card that
contains the image currently displayed.
Refer to “Sorting images (Filtering)”
(page 49).
Tips
• If using the buttons on this unit, press
MENU, select the
(Editing) tab with
B/b, select [Marking] with v/V, and press
.
2
Press v/V to select the mark you
want and then press
.
Use B/b/v/V to select the image
from the image list to be marked and
press
.
5
Press MENU.
The confirmation screen appears.
6
Press v/V to select [Yes] and then
press
.
The mark is attached to the selected
image.
3
Press v/V to select [Mark this
image], [Mark/Unmark multiple
images] or [Mark all images] and
then press
.
If you select [Mark this image], the image
currently displayed will be marked and
showed in the future. (This item cannot be
selected on the slideshow display.)
If you select [Mark/Unmark multiple
images], you can select the image to
which you want to attach a mark from the
image list. Go to step 4.
If you select [Mark all images], the image
list is displayed. A check mark is attached
to the check box of all the images. Go to
step 5.
48 GB
To delete the registration of a
mark
Select [Unmark this image] or [Unmark all
images] and then press
in step 3. You can
also cancel the selection when you remove the
check mark from the check box.
• [Unmark this image]:
Removes a mark from the image currently
displayed. (This item cannot be selected on
the slideshow display.)
• [Unmark all images]:
During a sort:
Unmarks all images that meet the sorting
criteria.
Not during a sort:
Unmarks all images in the memory card that
contains the image currently displayed.
Notes
• Only marks attached to images on the internal
memory are saved.
Marks attached to images on a memory card will be
removed when you turn the power off or change
playback devices.
Tips
• You can select a mark from among 3 types.
• You can change the thumbnail size using [ / ] in
the image list.
Sorting images
(Filtering)
You can sort for images stored in the internal
memory or on a memory card according to
date, folder, image orientation or marks.
1
Press SORT when an image is
displayed on the screen.
Tips
•
2
If using the buttons on this unit, press
MENU, select the
(Editing) tab with
B/b, select [Sort] with v/V, and press
.
Select a sort style using v/V and
press
.
Using various functions
• [Sort by date]:
Filters by the shooting date.
• [Sort by folder]:
Filters by the folder.
• [Sort by vertical/horizontal]:
Filters by the image orientation.
• [Sort by mark]:
Filters by the mark.
3
Press B/b/v/V to select the item you
want and then press
.
Continued
49 GB
To cancel the sort
Press MENU while the sorted images are
displayed, select [Exit sort (show all photos)]
and press
.
To change the sort style
Press BACK while the sorted images are
displayed.
Adjusting image size
and orientation
Enlarging/reducing an image
You can enlarge or reduce an image in single
view mode.
Notes
• Do not turn this unit off or remove the memory card
during sort. Doing so may damage this unit or the
memory card or corrupt the data.
• Sort is automatically canceled in the following
cases:
– When the playback device is changed
– When images on a memory card are sorted and
the memory card is removed.
• If you change the memory device during sorting,
the sort is automatically canceled.
1
To enlarge an image, press
(zoom in) on the remote control. To
reduce an enlarged image, press
(zoom out).
Each press of the button enlarges the
image further. You can enlarge an image
to a maximum of 5 times the original
scale. You can move an enlarged image
up, down, left, and right.
To save an enlarged or a reduced image
(Crop and save)
1 Press MENU while the enlarged or reduced
image is displayed.
2 Press v/V to select the saving method.
If you select [Save as new image], a copy of
the image is saved. Proceed to step 3.
If you select [Overwrite], the new image
overwrites the old image. Proceed to step 5.
3 Press v/V to select the device on which to
save the image and press
.
4 Press v/V to select a destination folder and
press
.
5 Press v/V to select [Yes] and press
.
The image is saved.
6 When the confirmation screen appears after
you finish saving the image, press
.
Tips
• If you move the enlarged image with B/b/v/V and
press MENU in step 1, the image is trimmed into
the displayed image size and saved.
50 GB
Notes
• Enlarging an image may reduce the quality
depending on the image size.
• You cannot overwrite the image if its data format is
other than JPEG (.jpg)
Rotating an image
You can rotate an image during single view
mode.
1
2
3
Press B/b to select the
tab.
(Editing)
1
2
Press v/V to select [Rotate] and
then press
.
3
Press v/V to select the direction to
rotate and then press
.
4
•
:
Rotates the image 90 degrees
clockwise.
•
:
Rotates the image 90 degrees
counterclockwise.
5
You can use the timer function to turn this unit
on or off automatically when this unit is turned
on.
Press v/V to select [OK] and then
press
.
Notes
• An enlarged image cannot be rotated.
Tips
• You can also rotate an image with
(Rotate) on
the remote control. The image rotates 90 degrees
counterclockwise every time you press the button.
• When displaying the images in the internal
memory, the information used to rotate the image is
retained even after the power is turned off.
• You can rotate the image of the index image
display.
Press MENU.
Press B/b to select the
(Settings) tab.
Press v/V to select [Auto power ON/
OFF] and press
.
Press v/V to select [Setup method]
and press
. Then, press v/V to
select [Simple], [Advanced] or [Auto
off], and press
.
[Simple]:
Sets the auto power ON/OFF function
finely in one minute increments.
[Advanced]:
Sets the auto power ON/OFF function
according to a day of the week by one
hour units.
[Auto off]:
Sets the amount of time after which the
auto power OFF function turns off the
power if no operations are done.
Continued
51 GB
Using various functions
4
Press MENU in single view mode.
Changing the settings of
the auto power on/off
function
5
Press v/V to select [Time Setting]
and press .
1 Press B/b/v/V to select the time you
want to use the auto power on/off
function.
You can set this function according to a
day of the week by one hour units.
The color of the selected time zone
changes to blue after you press
. The
power supply of this unit will be turned
on when the blue time zone time occurs.
The color of the selected time zone
changes to gray, after you select the
blue time zone and then press
. The
power supply of this unit is turned off
while it is in the gray time zone.
[Simple]
1 Select an item for which you want to set
the time.
Press v/V to select [Power-ON timer]
or [Power-OFF timer] and press
.
Then, press v/V to select [Enable] and
press
.
2 Set the time at which you want to
activate the Power-ON timer or PowerOFF timer.
Press v/V to select [Auto ON time] or
[Auto OFF time] and press
.
Press B/b to select the hour or minute,
press v/V to set the hour or minute, and
press
.
3 Set the day of the week on which you
want to activate the timer.
Press v/V to select [Auto ON day] or
[Auto OFF day] and press
.
Press v/V to select the day on which
you want activate the timer and press
to make it checked.
Press v/V to move the cursor to [OK]
and press
.
[Advanced]
52 GB
Tips
• This unit automatically turns off at the
auto power off time even when in use,
except during printing.
The power is turned on automatically at
the time you set for [Power-ON timer]
during the standby mode.
2 Press B/b/v/V to select [OK] and then
press
.
[Auto off]
1 Press v to select [Time Setting] and
press
.
2 Press v/V to select [2 hour] or [4 hour]
and press
6
.
Press MENU.
Enjoy various
printing
(advanced printing)
Printing in various ways
53 GB
Changing print settings
(Date Print,Borders,Pages Per
Sheet)
Date Print (Print date)
Borders (With border)
Pages Per Sheet
1
2
3
4
5
Press MENU.
Press B/b to select the
(Settings) tab.
Press v/V to select [Print Settings]
and press
.
Press v/V to select an item you
want to change and press
.
Press v/V to select the setting value
and press
.
The set value is confirmed. (page 65)
54 GB
Tips
• When the print setting is set to [Date Print], [Pages
Per Sheet] and [Borders], printing is only enabled
when the image is displayed in single view mode
(page 36).
• This section describes only [Date Print], [Borders]
and [Pages Per Sheet] patterns.
• You can select any images from a memory card or
the internal memory and print them as a Layout
print. (page 57)
Performing “Creative
Print”
Making a Calendar
1
(Calendar/Layout print/ID Photo)
From the Creative Print menu, press
B/b/v/V to select
(Calendar),
then press
.
What is “CreativePrint”?
The window used for selecting the
calendar template is displayed.
You can edit images in a memory card or the
internal memory and create a calendar, layout
print or ID photo.
1
2
3
2
Press B/b/v/V to select the desired
template, and then press
.
The preview of the selected template is
displayed.
Press MENU.
Image area
Press B/b to select the
tab.
Calendar area
(Editing)
Press v/V to select [Creative Print]
and press
.
The Creative Print menu is displayed.
Tips
• You can press MENU while performing Creative
Print and set part of the print setup menu items.
Press BACK. The window of the previous step is
displayed. Depending on the step, you may not be
able to undo the operation.
To exit the Creative Print menu
Do the following steps.
1 Press MENU and press B/b to select the
(Editing) tab.
2 Press v/V to select [CreativePrint Complete]
and press
.
Tips
• You can select and set an image area or
calendar area in any order.
3
Select an image.
When you select a template with multiple
images, select an image for each area.
1 On the calendar template preview
screen, press B/b/v/V to select an
image area and press
.
The image selection screen appears.
2 Press B/b/v/V to select an image and
press
.
The image edit screen appears.
Tips
• You can also exit the Creative Print menu by
pressing B/b/v/V to select
and then pressing
on the preview screen. The dialog box for
saving an image may be displayed.
4
Edit the image.
For details on how to edit an image, see
page 58.
5
Adjust the image.
For details on how to adjust an image, see
page 59.
Continued
55 GB
Printing in various ways
To undo the operation midway
6
7
Set the calendar.
1 On the calendar template preview
screen, press B/b/v/V to select the
calendar area and press
.
The calendar setting window is
displayed.
Press v/V to select
.
and press
The image preview screen appears.
8
Press PRINT.
Operate by following the instructions on
the screen.
Tips
• You can save the created calendar data. See page
59.
2 Press v/V to select the item that you
want to set, and then press
.
Item
Description
Start Y/M
Set the first month and the
year starting the calendar.
Press B/b to select the
month or year and press
v/V to set the number. Press
.
First day
of the
week
Set the day of the week
(placed furthest left in the
calendar). Press b and then
v/V to select [Sunday] or
[Monday]. Then press
.
Date color Set the color of Sunday and
Saturday to be displayed in
the calendar. Press b and
then v/V to select the
desired color for Sunday
and Saturday. Then press
.
A calendar is displayed in the calendar
area of the image preview screen.
56 GB
Making a Layout print
The following layouts are available.
• 1/2/4/9/13/16 photos per page
1
Making an ID Photo
1
From the Creative Print menu, press
B/b/v/V to select
(ID Photo),
then press
.
The window used for setting the height
and width of an ID photo is displayed.
From the Creative Print menu, press
B/b/v/V to select
(Layout
print), then press
.
The Layout print templates are displayed.
Tips
2
Press B/b/v/V to select the desired
template, then press
.
3
2
• To specify the unit:
Select the text box at the left of the photo.
You can select either [cm] or [inch].
Select an image.
When you select a template with multiple
images, select an image for each area. For
details on how to select an image, see step
3 on page 55. When you select image(s),
the adjustment screen appears.
4
5
• To specify the width:
Select the figure box in the upper of the
photo.
3
Adjust the image.
For details on how to adjust an image, see
page 59.
6
• To specify the height:
Select the figure box at the right of the
photo.
Edit the image.
For details on how to edit an image, see
page 58.
4
Operate by following the instructions on
the screen.
5
Tips
Press v/V to set the size or unit and
then press
.
The layout image of the selected size is
displayed.
Press PRINT.
• You can save the layout. See page 59.
Press B/b/v/V to select the item that
you want to adjust, and press
.
If you want to specify the other
items, repeat steps 2 and 3.
Press B/b/v/V to select
press
.
and
The window for selecting an image is
displayed.
Continued
57 GB
Printing in various ways
The preview of the selected template is
displayed
• You can set a maximum size of 7.0 (width)
cm × 9.0 (height) cm.
6
Select an image.
For details on how to select an image, see
step 3 on page 55. When you select
image(s), the adjustment screen appears.
7
Edit the image.
Editing an image
You can edit an image on the image edit screen.
Image editing screen for
(Calendar)
For details on how to edit an image, see
next topic.
8
Adjust the image.
For details on how to adjust an image, see
page 59.
9
Press PRINT.
Operate by following the instructions on
the screen.
Tips
1
• You can save the created ID photo. See page 59.
Notes
Press v/V to select the desired
editing items and press
.
Items
• An ID photo print using this unit may not be
acceptable to be used for an identification card or
passport. Please check the requirements for the
photo to be used in the certificate before you submit
the card or passport.
Description
Reduces or enlarges an
image.
Moves an image by B/b/v/
V. Pressing
confirms
the position.
Rotates an image 90
degrees clockwise.
Enters image quality
adjustment mode.
For details, see page 59.
Changes an image from
color to monochrome.
2
Press v/V to select [OK] and press
.
The image preview screen appears.
58 GB
Adjusting an image quality
1
On the image edit screen, press B/b
to select
and press
.
Saving an image
1
The image quality adjustment menu is
displayed.
2
Press B/b to select
on the image
preview screen and press
.
Calendar preview screen
Press v/V to select the desired
adjustment tool and press
.
The adjustment screen of the selected tool
appears.
When [Brightness] is selected.
The destination selection screen appears.
2
3
Items
Description
Brightness
Press b to brighten the
picture or B to darken it.
Tint
Press b to make the picture
greenish or B to make it
reddish.
Saturation
Press b to deepen the colors
or B to lighten them.
Sharpness
Press b to sharpen the
outlines or B to soften them.
Press
.
The adjustment takes effect.
3
.
Press v/V to select the folder you
want to save and press
.
Tips
• If you select [New folder], a new folder is
created automatically.
4
Press
screen.
on the confirmation
Tips
• The previous image is not overwritten.
Notes
• Do not turn this unit off or remove a memory card
while saving the image.
Doing so may damage this unit or the memory card
or corrupt the data.
59 GB
Printing in various ways
Press B/b to adjust an image while
checking the level.
The image before adjustment is displayed
on the left half of the screen, and the
adjusted image is displayed on the right.
Press v/V to select a device to
export the image to and press
Performing Batch Print
1
2
(Index Print/DPOF Print/Print All)
3
• Index Print
You can print a list (index) of all the images
stored in a memory card or this unit’s
internal memory which allows you to check
the contents of the selected media easily.
The number of split panes on a sheet will be
calculated automatically. Images are printed
in each split pane.
Press MENU.
Press B/b to select the
tab.
(Editing)
Press v/V to select [Batch Print] and
press
.
The Batch Print menu is displayed.
4
Press v/V to select [Index Print],
[DPOF Print], or [Print All] and then
press
.
The confirmation dialog box is displayed.
Notes
• If there are no DPOF preset images when
you select [DPOF Print], an error message
will be shown.
5
• DPOF Print
The images which are DPOF (Digital Print
Order Format) preset for printing are
displayed with the print mark ( ) in an
image preview. You can print those images
at one time. The images are printed with the
preset number of copies in the order they
were displayed.
• Print All
You can print all the images stored on a
memory card or in the internal memory.
Notes
• Only selected images are displayed during sort.
• For how to preset images for printing, refer to the
manual of your digital camera.
• Some types of digital cameras do not support the
DPOF function, or this unit may not support some
of the functions of the digital camera.
60 GB
Press B/b to select [Yes] to start
printing or [No] to cancel printing,
and then press
.
When you select [Yes], printing starts.
Changing the settings of this unit
Changing the settings
3
Press v/V to select the item you
want to change and then press
.
You can change the following settings.
•
•
•
•
Slideshow Settings
Auto Power ON/OFF
Date/time Settings
General Settings (Listing Order, Sony logo
ON/OFF etc,.)
• Print Settings
• Language Setting
• Initialize
Setting procedure
1
2
For example, when [Slideshow Settings]
is selected.
4
.
This enables you to set each of the items
(page 63).
Press MENU.
Press B/b to select the
(Settings) tab.
Notes
Press v/V to select a setting value
and then press
.
Each time you press v/V, the setting value
changes. In the case of a numerical value,
press V to increase the value and press v
to decrease the value.
If you press
, the setting is confirmed.
Notes
6
Press MENU.
The menu closes.
Continued
61 GB
Printing in various ways
• When this unit is, for instance, displaying a
slideshow, some settings of some items
cannot be changed. They are shown in gray
and cannot be selected.
5
• Only the
(Settings) tab is available in the clock
and calendar display mode.
Press v/V to select the item you
want to change and then press
To reset to factory default
settings
1
2
3
Press MENU and then B/b to
select
(Settings) tab.
Press v/V to select [Initialize] and
press
.
Press v/V to select [Initialize
settings] and then press
.
All settings except for clock time and
date are reset to the default settings.
Tips
You can also use the MENU button on this unit.
62 GB
Items to set
Item
Setting
Slideshow
Settings
See “Changing the settings of the slideshow” (page 40).
Auto Power
ON/OFF
Sets the timer function which turns the power supply of this unit on or off, automatically.
You can use this function with the following settings. (page 51)
Simple
Advanced*
Description
Sets the auto power ON/OFF function finely in one minute increments.
Power-ON
timer
You can set the timer (time/day) and input time for the
power to turn on automatically, when you set this
function to enable.
Power-OFF
timer
You can set the timer (time/day) and input time for the
power to turn off automatically, when you set this
function to enable.
Sets the auto power ON/OFF function according to a day of the week by
one hour units.
The following functions are enabled when you press the following
buttons after you have set time or date to turn on or off this unit
automatically.
Returns to the previous screen after confirming the
operation.
Cancel
Returns to the previous screen after canceling the
operation.
Reset all
Deletes all the selected times.
Date/time
Settings
Sets the date, time, first day of a week, etc. (page 24)
General
Settings
Listing Order
Printing in various ways
OK
Sets the display order of images. This setting affects the order in
[Slideshow Settings].
Number
Order*
Displays images in order of image numbers.
Shoot. Date
Displays images in order of shooting date.
Auto display
orientation
ON*/OFF: Enables or disables the function of automatically changing the
image orientation according to the orientation of this unit.
LCD backlight
Allows you to set the brightness of the backlight of the LCD screen to a
level from 1 to 10*.
*: Factory default settings
Continued
63 GB
Item
Setting
Description
General
Settings
Image import
size
Resize*
When importing images from a memory card, this
setting resizes the images and saves them to the internal
memory. You can save more images, but deterioration in
image quality compared to the original images is
noticeable when the images are displayed on a large
monitor via a computer or other device.
Original
Saves images to the internal memory without
compressing them. There is no deterioration, but you can
save fewer images.
Sony logo ON/
OFF
Language
Setting
ON*/OFF: You can set whether this unit’s Sony logo lights or not.
Sets the display language on the LCD screen.
Japanese/English*/French/Spanish/German/Italian/Russian/Korean/Simplified Chinese/
Traditional Chinese/Dutch/Portuguese/Arabic/Persian/Hungarian/Polish/Czech/Thai/Greek/
Turkish/Malay/Swedish/Norwegian/Danish/Finnish
Notes
• Default language setting may vary in some regions.
Initialize
Format internal
memory
You can format the internal memory.
Notes
• All the images imported to the internal memory will be deleted.
• Do not format the internal memory by using a connection to a
computer.
Initialize
settings
Returns all settings to their factory defaults except for the current date and
time setting of the [Date/time Settings].
*: Factory default settings
64 GB
Item
Print
Settings
Settings
Date Print
Borders
Description
Date/Time Prints an image with the date and time of shooting when
Date
the image is recorded according to the DCF (Design rule
for Camera File system) format and the date and time of
shooting is recorded as part of shooting information. You
can select [Date] or [Date/Time].
OFF*
Prints an image without the date and time.
Border 1/
Prints an image with borders around the image. To print an
Border 2
image without being cut, select [Border 1]. To leave
almost-equal borders in the top, bottom, right and left
around an image, select [Border 2].
Notes
• When you select [Border 2], the top and bottom edges or right
and left edges may be trimmed and printed depending on the
image.
Borderless* Prints an image without blank space around the image.
Notes
• When printing a standard 4:3 picture shot by a digital camera, the
top and bottom edges of the image are cut and it is printed as a
3:2 picture.
*: Factory default settings
Printing in various ways
Continued
65 GB
Item
Print
Settings
Settings
Auto Fine
Print7
Description
ON*
The function automatically corrects the picture quality so
that an image may be printed in more vivid, clear and
beautiful pictures. It is especially effective for a darker
image with low contrast.
Not available when printing the following:
• Pages Per Sheet (Page 54)
• Index Print (Page 60)
• Slideshow Print other than Single view (Page 36)
• CreativePrint (Page 55)
Notes
• The original image data is not corrected.
• When printing in PC mode, the Auto Fine Print7 setting with the
printer driver has priority over the setting here.
Pages Per
Sheet
Color
Setting
66 GB
OFF
Prints an image without any corrections.
Prints the specified numbers of split screens, with each
4-split/
9-split/
screen an image is placed.
16-split
OFF*
Prints an image without split screens.
Adjusts the colors and sharpness of a print. Press B/b to select a color
element ([R] (red), [G] (green), or [B] (blue)) or [S] (Sharpness), and
then press v/V to set the level. You can set the levels for R, G, B in the
range from +4 to –4 and for S in the range from +7 to 0.
R:Adjusts the red and blue elements. The higher you set the level, the
more reddish the picture becomes as if it receives red light. The
lower you set the level, the darker the picture becomes as if light
blue is added.
G:Adjusts the green and purple elements. The higher you set the level,
the more greenish the picture becomes as if it receives green light.
The lower you set the level, the darker the picture becomes as if red
purple is added.
B:Adjusts the blue and yellow elements. The higher you set the level,
the more bluish the picture becomes as if it receives blue light. The
lower you set the level, the darker the picture becomes as if yellow
is added.
S:The higher you set the level, the more distinct the outlines become.
(*R: 0/G:0/B:0/S:0)
*: Factory default settings
Connecting to a
computer lets you do
even more
Using with a computer
Using the internal memory of this unit
Printing from a computer
67 GB
Using with a computer
What you can do when
connected to a
computer
Connecting this unit to a computer lets you use
the following two functions. For details on
mode selection, see page 70.
Using the internal memory of
this unit ([Use internal memory])
You can browse the internal memory of this
unit on the computer. You can also copy
images from the computer to the internal
memory and list them on this unit.
• You cannot operate this unit from another USB
device being used simultaneously.
• Do not disconnect the USB cable during data
communication.
• Operation with all computers that satisfy the
recommended system requirements is not
guaranteed.
• This unit has been demonstrated as operable when
connected to a computer. When other devices are
connected to this unit, these devices may not
recognize the internal memory of this unit.
When printing
To use the supplied printer driver and PMB
(PictureMotionBrowser), you need a computer
that meets the following system requirements:
Recommended Microsoft Windows Vista SP2 /
OS*1*2:
Windows XP SP3
*1
Printing from a computer
([Print])
You can print images on the computer from
this unit. Before printing for the first time, you
need to install the supplied software.
*2
System requirements
Using as an internal memory
To use this unit as an internal memory, your
computer must meet the following
recommended system requirements.
CPU:
Pentium III 500 MHz or faster
(Pentium III 800 MHz or faster
is recommended.)
RAM:
256 MB or more (512 MB or
more is recommended.)
Hard disk
space:
500 MB or more (Depending on
the Windows version you are
using, more space will be
required. To handle image data,
you will need additional hard
disk space.)
Display
setting:
Screen resolution:
1024 dots × 768 dots or more
Screen colors:
High Color (16-bit) or greater
x Windows
Recommended OS: Microsoft Windows 7/
Windows Vista SP2/Windows XP SP3
Port: USB port
x Macintosh
Recommended OS: Mac OS X (10.4 or later)
Port: USB port
Notes
• If multiple USB devices are connected to a
computer or if a hub is used, a problem may occur.
In such a case, simplify the connections.
68 GB
The printer driver is not
guaranteed on Windows 2000 and
cannot run on Windows ME or
earlier or on Macintosh.
PMB does not support on
Windows 2000 or earlier
operating systems / Windows
Vista Starter Edition / Windows
XP 64-bit and Starter Edition /
Macintosh.
PMB runs in a 32-bit
compatibility mode on Windows
Vista 64-bit edition.
Connector:
USB connector
Drive:
CD-ROM drive (to be used for
software installation)
Notes
You need to prepare beforehand, depending on
how you connect this unit to the computer.
Using the internal memory of
this unit
You do not need to prepare before connecting.
Printing (for the first time)
The first time you connect this unit to a
computer to print, you must first install the
supplied printer driver.
For the printer driver installation method, see
page 73.
Printing (from the second time
onwards)
You do not need to prepare before connecting.
Using with a computer
• If a hub is used to connect this unit and your
computer, or if two or more USB devices,
including other printers, are connected to your
computer, a problem may occur. In such a case,
simplify the connections between your computer
and this unit.
• You cannot operate this unit from another USB
device being used simultaneously.
• Do not disconnect the USB cable from or connect
it to this unit during data communication or
printing.
• This unit does not support standby, sleep, and
hibernation modes and restarting from those
modes. Do not allow the computer connected to
this unit to switch to one of those modes during
printing. If you do so, printing may be failed.
• When printing is failed, remove a USB cable and
then connect it, or restart your computer. Then try
printing again.
• Operation with all computers that satisfy the
recommended system requirements is not
guaranteed.
• PMB supports DirectX technology and DirectX
installation may be required.
DirectX is available on the CD-ROM.
• If the PMB is installed on a computer on which the
Cyber-shot Viewer is already installed, the Cybershot Viewer will be overwritten and replaced by
the PMB. The browsing folders once registered in
the Cyber-shot Viewer will be automatically
registered in the PMB.
Before connecting to a
computer
69 GB
Connecting to a
computer
Selecting the function
of this unit
1
1
2
Connect this unit to the AC power
source. (page 22)
Turn your computer on.
The PC mode selection screen appears on
the LCD of this unit.
Connect the computer and this unit
with a commercially available USB
cable.
Tips
• If the computer is already switched on, the
mode selection screen is displayed when
this unit is connected to the computer.
To USB B
connector
2
To USB connector
Computer
Notes
• Use a USB cable with a B-type plug (for
the USB B connector of this unit) shorter
than 3 meters.
3
Turn this unit on. (page 23)
Press B/b to select [Use internal
memory] or [Print] and then press
.
For how to use the various functions, see
the following pages.
• [Use internal memory] t page 71
• [Print] t page 73
The first time you select [Print], install the
supplied printer driver before pressing the
button. (page 73)
Tips
• If you disconnect this unit from your
computer and reconnect it, the PC mode
selection screen appears and you can
change the mode.
For details on how to disconnect this unit
from your computer, see page 72.
Notes
• The dialog boxes shown in this section are
from Windows Vista, unless otherwise
specified. The installation procedures and
the dialog boxes shown differ depending on
the operating system.
70 GB
Using the internal memory of this unit
Copying an image from
your computer to this
unit
You can connect to a computer to view and
copy images from the internal memory of this
unit to the computer, and copy images from the
computer to this unit.
Note
• When copying an image from your computer to this
unit, the image will not be resized and stored in the
original size.
If you want to save the resized image, import it
from a memory card.
1
2
On the PC mode selection screen of
this unit, press B/b to select [Use
internal memory] and then press
.
When the “Auto Play” window
appears on the computer display,
click “Open folder to view files”.
If the “Auto Play” window does not
appear, click “Computer (My Computer)”
3
Move the cursor in this window and
right click, and then click “New” “Folder”.
Name this new folder. In this manual, the
folder name “sony” is used as an example.
5
Double click to open this “sony”
folder.
Open the folder that contains the
image files you want to copy, and
then copy the image files by using
drag-and-drop.
Notes
• When saving images from a computer in the
internal memory, make a folder in the internal
memory and save the images in this folder. If you
do not make a folder, you can only save up to 512
images. In addition, the number of images may be
reduced depending on the file name length or
character type.
• A particular image may not be displayed in order of
the shooting date on the index image display, etc as
the information on the shooting date may have been
changed or lost when you edited or saved that image
file on a computer.
• Image files made or edited on a computer may not
be displayed. Image files set to “Read Only” on a
computer cannot be deleted on this unit. Cancel
“Read Only” before saving image files from a
computer on this unit.
71 GB
Using the internal memory of this unit
in the Start menu, and then open the
removable disc.
4
Disconnecting your
computer
Disconnect the USB cable or turn this unit off
after disconnecting it from your computer.
1
2
3
Double-click
(Disconnect) on
the Task Tray of your computer.
Click
(USB Mass Storage
Device) t “Stop”.
Click “OK” after checking the drive
you want to remove.
Tips
• When using [Print], you do not need to do this step.
72 GB
Printing from a computer
Printing an image from
your computer
Notes
• Installation of the software is required only when
you connect this unit to your computer for the first
time.
You can print the images from a computer by
installing the supplied software on your
computer and connecting it to this unit.
This section explains how to install the
supplied software on your computer and how to
use the supplied PMB (Picture Motion
Browser) software to print an image.
Please also refer to the operating instructions
supplied with your computer for information
on operating the computer.
Installing the software
Installing the printer driver
Follow the procedures below to install the
driver.
Notes
• Do not connect this unit to the computer before
installing the driver.
• Please log on to Windows using a “Computer
administrator” user account.
• Be sure to close all running programs before
installing the software.
1
On the supplied CD-ROM
The supplied CD-ROM contains the following
software:
• Printer driver for the DPP-F800:
The software describes this unit’s
requirements and enables printing from the
computer.
• PMB (Picture Motion Browser):
Sony’s original software application that
allows you to handle photographs and
moving images—this includes capturing,
managing, processing, and printing.
Turn your computer on, start
Windows, and insert the supplied
CD-ROM into the CD-ROM drive of
your computer.
The installation window is displayed.
• If the installation window is not displayed
automatically, double-click the “Setup.exe”
file on the CD-ROM.
• In Windows Vista, the AutoPlay window
may appear. Even if this occurs, select
“Setup.exe” execution and install the driver
according to the instructions on the screen.
2
Click “Installing Printer Driver.”
The “InstallShield Wizard” dialog box is
displayed.
Continued
73 GB
Printing from a computer
Notes
3
Click “Next.”
The license agreement dialog box is
displayed.
4
Read the agreement thoroughly,
and if you agree, check “I accept
this agreement” and click “Next.”
Tips
• When an older version of the printer driver
has been installed on your computer, the
message “Older version of the printer
driver has been found.” may appear on the
screen. Click “Yes,” and follow the
displayed instructions to restart your
computer. Then, perform the installation
procedures again. After the computer is
restarted, the older version of printer driver
will be deleted. If you install the new
version of printer driver, you can use the
new version of printer driver.
5
To USB
connector
To USB
connector
Windows PC
Notes
Click “Install.”
• Use a USB cable with a B-type plug (for
the USB B connector of this unit) shorter
than 3 meters.
Installation starts.
6
7
8
When the “Sony DPP-F800 printer
driver has been successfully
installed.” dialog is displayed, click
“Finish.”
Press the 1 (on/standby) button to
turn on this unit.
Connect the USB connectors of this
unit and your computer with the
USB cable.
9
On the mode selection screen of this
unit, press the B/bbuttons to select
[Print] and press the
button.
10 Wait for a while, then check to see
that “Sony DPP-F800” has been
added to the “Printers” or “Printers
and Faxes.”
11 When the installation is complete,
remove the CD-ROM from your
computer and keep it for future use.
To continue the process and install the
PMB software, follow the procedures
from step 2 on page 76.
74 GB
6 Click “Yes.”
Notes
• If the installation fails, remove this unit from your
computer, restart your computer, and then follow
the installation procedures from step 1 again.
• After installation, the “Sony DPP-F800” is not yet
set as the default printer. Set the printer you use for
each application.
• The supplied CD-ROM will be required when you
uninstall or re-install the printer driver. Keep it for
possible future use.
• Before you use this unit, read the Readme.txt file
(the README folder of the CD-ROM c English
folder c Readme.txt).
When the software is installed
The
icon is displayed on the Windows
desktop, as well as a shortcut to the web site for
printer customer registration. After you finish
registration, you can find support information
at: http://www.sony.net/registration/di/
Notes
• If the installation window is not displayed
automatically, double-click the “Setup.exe”
file on the CD-ROM.
3 Click “Installing Printer Driver.”
The “InstallShield Wizard” dialog box is
displayed.
4 Click “Next.”
The license agreement dialog box is
displayed.
5 Read the agreement thoroughly, and if you
agree, check “I accept this agreement” and
click “Next.”
The confirmation dialog box used for
removing the software is displayed.
Installing the PMB (Picture
Motion Browser)
Follow the procedures below to install the
PMB.
Notes
• Please log on to Windows using a “Computer
administrator” user account.
• Be sure to close all running programs before
installing the software.
If you have already installed one or more
versions of PMB on your computer, check the
version of the installed PMB. (Click [Help] on
the menu bar of the PMB, and select [About
Picture Motion Browser]. The version
information is displayed.)
Compare the version number of the supplied
CD-ROM with that of the previously installed
PMB, check to ensure that the versions have
been installed in order, from the older to the
newer. When the computer you are using has a
newer version of PMB already installed,
uninstall that version first, then reinstall both
versions, starting with the older one first. If you
install the newer version first, some functions
of PMB may not operate correctly.
1
Turn your computer on, start
Windows, and insert the supplied
CD-ROM into the CD-ROM drive of
your computer.
The installation window is displayed
(page 73).
Continued
75 GB
Printing from a computer
Uninstalling the printer driver
When the printer driver becomes unnecessary,
please follow the procedures below to remove
the printer driver:
1 Disconnect the USB cable from this unit and
the computer.
2 Insert the supplied CD-ROM into the
CD-ROM drive of your computer.
The installation window is displayed.
The confirmation dialog box used for restart
is displayed.
7 Check “Yes, I want to restart my computer
now” and click “OK.”
After the computer is restarted, the relevant
files will be deleted and uninstallation is
complete.
2
Click “Installing PMB (Picture Motion
Browser)” and follow the screen
instructions to set your region and
language.
Printing photos from a
computer
The license agreement dialog is displayed.
3
Read the agreement thoroughly,
and if you agree, check “I accept the
terms of the license agreement” and
click “Next.”
After you click “Next” in the license
agreement dialog, the dialog box notifying
you that the program is ready to installed
is displayed.
4
Select “Install” and follow the screen
instructions to proceed with
installation.
When you are prompted to restart your
computer, follow the displayed
instructions to restart it.
5
When the installation is complete,
remove the CD-ROM from your
computer and keep it for future use.
Notes
• If the installation fails, perform the installation
procedures from step 2 again.
• The supplied CD-ROM will be required when you
uninstall or re-install the PMB. Keep it in a safe
place for possible future use.
Uninstalling the PMB
When this software is no longer needed,
remove it from your computer as follows:
1 Click “Start” - “Control Panel.”
The Control Panel is displayed.
2 Click “Uninstall a program.”
Depending on the operating system, it may
be called “Programs and Features” or “Add
or Remove Programs.”
3 Select “PMB” and click “Change/Remove.”
The software uninstallation process starts.
76 GB
Printing from the PMB (Picture
Motion Browser)
You can use the PMB to print an image from
your computer.
1
2
Press B/b to select [Print] on the PC
mode selection screen of this unit
and then press
.
Start the PMB window using either
of the following methods:
• Double-click
(PMB) on the
Windows desktop.
• Click “Start” - “All Programs” “PMB.”
When the PMB is started for the first time,
its initial setting screen is displayed.
For how to register images saved in a
folder other than the “Pictures” folder, see
“Registering a browsing folder” on
page 80.
Tips
• In Windows XP, please read “Pictures” as
“My Pictures.”
How to access the “Pictures” folder
Click “Start” - “Pictures” from the
taskbar.
The main window of the PMB is
displayed.
5
In the “Printer” drop-down list box,
select “Sony DPP-F800.” To set the
paper orientation or other print
options, go to step 6. To print, skip
to step 11.
In main window, there are the following
two different views. To switch the view,
click the “Calendar” or “Index” tab in the
bar above.
• “Calendar” view
The images will be classified according
to the shot date and are displayed as
thumbnails on each date of the calendar.
In “Calendar” view, you can switch the
display by year, by month, or by hour.
• “Index” view
The images will be classified in each
registered folder and are displayed as
thumbnails.
In this section, “Index” view windows are
used as examples.
Select the printer you are using:
“Sony DPP-F800”
Paper size
To change the size, click
“Properties.”
Note: In some regions, L size
print paper is not sold.
Print
Options
Click the folder containing the
photos you want to print.
As an example, the “sample” folder is
selected in the following explanation.
4
Description
Printer
Select the photos that you want to
print and click
(print).
The Print dialog box is displayed.
Properties
• Zoom the image until the print
area is full: When checked, an
image will be printed over the
entire printing area of the
paper. An edge of the photo
may be cut. When unchecked,
an image will be printed
without cutting off any
portions.
• Print date taken: When
checked, an image is printed
with the date of shooting if the
image is a file recorded in the
DCF (Design rule for Camera
File system) format.
Specifies paper size,
orientation, picture quality and
other details.
Continued
77 GB
Printing from a computer
3
Items
6
To set the paper orientation or other
print options, click “Properties.”
The “Properties” dialog box of the
selected printer is displayed. The printer
driver of this unit utilizes the Universal
Printer Driver, a Microsoft common
printer driver. In the dialog boxes, there
are some items that are not used within
this unit.
7
8
Click “Advanced.”
The “Sony DPP-F800 Advanced Options”
dialog box is displayed.
In the “Layout” tab, specify the
paper orientation or other options.
Items
Paper/
Output
Items
Orientation
Page Order
78 GB
Description
Select the orientation of an
image when printed:
• Portrait
• Landscape
Select the order of the pages
when printed:
• Front to Back
• Back to Front
Pages Per
Sheet
Specify the number of copies
per sheet to be printed. Select
“1.”
Advanced
Specifies the paper size or
other options.
Description
• Paper Size: From the dropdown list box, select the paper
size you actually use for
printing: P size/L size
Note: L size print paper is not
sold in some regions.
• Copy Count: Specify the
number of copies to be
printed.
• ICM Method: This unit does
Graphic not support the ICM method
Image
settings. Even if you select an
Color Manoption other than “ICM
agement
Disabled,” the printed results
will not reflect the setting.
Leave the option as it is.
• ICM Intent: This unit does not
support the ICM Intent
settings. Leave the option as it
is.
Items
Document
Options
Printer
Features
Description
• Advanced Printing Features:
Select “Enabled” to turn on
advanced printing options
such as “Page Order.” If a
compatibility problem occurs,
disable this feature.
• Color Printing Mode: To print
in colors, select “True Color
(24bpp).” To print in
monochrome, select
“Monochrome.”
On the “Paper/Quality” tab, specify
the color or paper source.
Items
Description
Tray
Selection
From the “Paper Source” dropdown list box, select
“Automatically Select.”
Color
To print in colors, select
“Color.” To print in
monochrome, select “Black &
White.”
Advanced
The “Sony DPP-F800
Advanced Options” dialog box
is displayed (page 78). For
details, see step 9.
10 Click “OK.”
The “Print” dialog box is displayed again.
11 Click “Print.”
Printing starts. For the details of the
properties of the PMB, refer to the PMB
help.
Notes
• You cannot print movies, BMP or RAW data.
• Set this unit in the print position to use it as a
printer. It will not print in any other position. For
details on the print position, see page 32.
Tips
• To select a series of still images in the image area
of the main window, click the first image in the
series and then click the last image while pressing
the Shift key. To select multiple still images not in
a sequence, click the images individually while
pressing the Ctrl key.
Continued
79 GB
Printing from a computer
• Borderless Print: To print an
image without borders, select
“ON.” To print with borders,
select “OFF.” Depending on
the application software, an
image will be printed with
borders even if “ON” is
selected. Set an image to be
printed fully in the print
range.
• Auto Fine Print7: Select from
“ON” or “OFF.” When you
select “ON,” please select
“ICM Disabled” for “ICM
Method.” Unlike direct
printing from a memory card,
no Exif data is referred.
• Color Setting: You can
change R (red), G (green), B
(blue), and sharpness
settings. For details, see
page 66.
9
• You can also print from single image display
screen.
• To cancel the printing operation, do the following.
1Double-click on the printer icon on the taskbar,
and open the “Print” dialog box.
2Click the document name that you want to
cancel printing of and then click “Cancel” from
the “Document” menu.
The dialog box used for confirming the deletion
is displayed.
3Click “Yes.”
The printing job is canceled.
Notes
• When you cancel a job, you cannot stop the
page currently being printed.
Registering a browsing folder
PMB does not allow you to view images saved
on the computer hard disk directly. You must
first register the browsing folder as follows:
1
Click “File”-“Register Viewed
Folder.”
The “Register Folders to View” dialog
box is displayed.
2
Select the folder you want to register
and then click “Apply” and “OK.”
Notes
• You cannot register the whole drive.
80 GB
The confirmation dialog box used for
registration is displayed.
3
Click “Yes.”
Registration of the image information in
the data base starts.
Notes
• The folder you select as the destination of
the imported images will be registered
automatically.
• You cannot cancel registration of the folder
you register here.
To change the browsing folder
Repeat steps 1 to 3.
Tips
• If a sub folder is contained in the source folder, the
images in the sub folder will also be registered.
• When the software is first started, a message
prompting you to register “Pictures” will be
displayed.
• Depending on the number of images, it may take
some tens of minutes to register images.
Printing from a commercially
available software application
You can use a commercially available software
application to print an image from the DPPF800. Select “DPP-F800” as a printer in the
print dialog box, and select the print paper size
in the page setup dialog box. For details of print
settings, see steps 6 and 7 on page 78.
On the “Borderless Print” setting in
“Printer Features”
When using an application other than the PMB,
an image might be printed with borders even if
you select “ON” for “Borderless Print” in
“Printer Features” of the “Sony DPP-F800
Advanced Options” dialog box.
When you select the borderless print option, the
printing range information for borderless
printing will be supplied to the application.
Some applications, however, may arrange and
print the image with borders within the
specified range.
If this occurs, do the following to print an
image without borders:
• When you can set the print range with an
application, set an image to be printed fully
within the available print range. For
example, if you print images using
“Windows Photo Gallery” of Windows
Vista, select “Full page photo print” and
check “Fit picture to frame.”
Orientation setting
Depending on the software application you use,
orientation may not change even if you change
portrait or landscape setting.
With the Borders/Borderless setting of
the printer driver
When the software application you use has
Borders/Borderless setting, we suggest you
select “ON” for “Borderless Print” in “Printer
Features” of the “Sony DPP-F800 Advanced
Options” dialog box as the printer driver
setting.
Printing from a computer
No. of prints setting
Depending on the software application you are
using, the No. of prints setting of the
application may have priority over the setting
specified in the printer driver dialog box.
81 GB
memo
82 GB
Troubleshooting
Error messages
If trouble occurs
If the paper jams
Cleaning
83 GB
Error messages
If an error occurs, one of the following error messages may be shown on the LCD screen of this unit.
Follow the corresponding solution below to solve the problem.
Memory cards and internal memory
Error message
Meaning/Solutions
No Memory Stick. / No SD
Memory Card. / No xD-Picture
Card.
• A memory card is not inserted in a slot.
Insert a memory card in the corresponding slot.
(.page 25)
An incompatible Memory Stick is
inserted. / An incompatible SD
Memory Card is inserted. / An
incompatible xD-Picture Card is
inserted.
• An unsupported memory card is inserted. Use a memory
card that is supported by this unit.
No images on file.
• There is no image file that can be displayed on the screen
of this unit on the memory card. Use a memory card
containing image files that can be displayed with this unit.
Cannot delete a protected file.
• To delete a protected file, cancel the protection on your
digital camera or computer.
Memory card is protected. Remove • The memory card is write-protected. Slide the writeprotection then try again.
protect switch to the enable position. (.page 100)
The Memory Stick is full. / The SD • No more data can be saved because the memory card, or
Memory Card is full. / The xDthe internal memory is full. Delete images, or use a
Picture Card is full. /The internal
memory card with free space available.
memory is full.
Error reading the Memory Stick. /
Error reading the SD Memory
Card. / Error reading the xDPicture Card./Error reading the
iternal memory.
Write error on the Memory Stick. /
Write error on the SD Memory
Card. / Write error on the xDPicture Card. / Write error on the
internal memory.
84 GB
• In case of a memory card:
An error has occurred. Check that the memory card is
inserted correctly. If this error message is shown
frequently, check the status of the memory card with a
device other than this unit.
• In case of the internal memory:
Format the internal memory.
Notes
• Formatting deletes all image files imported to the internal memory.
Error message
Meaning/Solutions
The Memory Stick is read only.
• A “Memory Stick-ROM” is inserted. To save the images,
use the “Memory Stick” recommended.
The Memory Stick is protected.
• A protected “Memory Stick” is inserted. To edit and save
the images, use an external device to remove protection.
Memory card format not supported. • In case of a memory card, use your digital camera or other
device to format the memory card.
• In case of the internal memory, format it with this unit.
Notes
• When you format the media, all the contained files will be deleted.
Image data
Error messages
Meaning/Solutions
Cannot open the image.
• This unit cannot display or open an image file whose
format is not supported.
No DPOF file.
• There are no DPOF-preset image files in the memory card.
Specify the print (DPOF) mark with your camera.
Ink ribbon
Error messages
Meaning/Solutions
No ink ribbon. Insert P size ink
ribbon and press [PRINT].
• The ink ribbon is not inserted in this unit. Set the ink
ribbon into this unit. (.page 33)
If “cleaning cartridge” is shown, set the cleaning cartridge.
(.page 97)
End of ink ribbon.
• Replace the current ink ribbon with a new ink ribbon.
(.page 33)
End of ink ribbon. Insert P size ink
ribbon and press [PRINT].
Ink ribbon type incorrect. Insert P
size ink ribbon and press [PRINT].
• Set an ink ribbon and print paper of the shown size.
(.page 33)
Error messages
Continued
85 GB
Print paper
Error messages
Meaning/Solutions
No paper tray.
• There is no print paper in this unit.
Insert paper tray containing P size print
– The paper tray is not set in this unit.
paper and press [PRINT].
– The print paper is not set in the paper tray.
– The print paper has run out.
No print paper. Set the print paper for
• In any case, set the print paper in the tray and set the
the P Size and press [PRINT].
paper tray into this unit. (.page 34)
No cleaning sheet. Set the cleaning
sheet and press [PRINT].
• There is no cleaning sheet in the paper tray. Insert the
cleaning sheet into the paper tray and set the paper tray
into this unit. (.page 97)
Wrong print paper. Set the print paper
for the P Size and press [PRINT].
• The print paper and ink ribbon do not match. Check
the ink ribbon size actually loaded in this unit and set
the print paper for the identical size. (.page 33, 34)
Paper jam. Remove print paper.
• Paper has jammed. See “If paper jams” (.page 96)
and remove any jammed paper from this unit.
86 GB
If trouble occurs
Before submitting this unit for repair, read the following suggestions. If the problem persists, consult
with your Sony dealer or Sony service facilities.
Power supply
Symptom
Check item
Cause/Solutions
The power cannot
be turned on.
• Is the power plug inserted
properly?
c Insert the power plug properly.
Displaying images
If you experience one of the following problems, check the table below: “No images are displayed
while this unit is turned on,” “Unable to set the operation screen” or “Printing does not start even
though the printer is turned on.”
Symptom
Check item
Cause/Solutions
No images are
displayed on the
screen.
• Is a memory card inserted
properly?
c Insert a memory card properly. (.page
25)
• Does the memory card
contain images saved with a
digital camera or other
device?
c Insert a memory card containing images.
c Check the file formats that can be
displayed. (.page 103)
• Is the file format compatible c A file that is not compatible with DCF
with DCF?
may not be able to be displayed with this
unit, even if it can be displayed with a
computer.
• Is this unit in clock and
calendar display mode?
Images are not
displayed in the
order of shooting
date.
c Set this unit to other than clock and
calendar display mode. (.page 26)
c The information on the shooting date may
• Were these images saved
be changed or lost when you edit or save
from a computer?
an image file on a computer.
• Were these images edited on
a computer?
If trouble occurs
Continued
87 GB
Symptom
Check item
Cause/Solutions
Some images are
not displayed or
printed.
• Are the images displayed in
the index view?
c If the image is displayed in the index view
but cannot be displayed as single image,
the image file may be damaged even
though its thumbnail preview data is fine.
c A file that is not compatible with DCF
may not be able to be displayed or printed
with this unit, even if it can be displayed
with a computer.
• Does the mark displayed
below appear in the index
view?
c If the mark shown on the left is displayed,
the image file may not be supported by
this unit because, for example, it is a JPEG
file that was created with your computer.
Also, the image file may be supported, but
not contain thumbnail data. Select the
mark and press
to change the screen to
single view mode, and if the image is
displayed it can be printed. If the mark on
the left is still shown even in single view
mode, the image file is not supported by
this unit and cannot be displayed or
printed.
• Were the images created
with an application on a
computer?
• Does the mark displayed
below appear in the index
view?
c If the mark shown on the left is displayed,
the image file is supported by this unit, but
the thumbnail data or image itself cannot
be opened. Select the mark and press
to change the screen to single view mode,
and if the image is displayed it can be
printed. If the mark on the left is still
shown even in single view mode, the
image file is not supported by this unit and
cannot be displayed or printed.
• Are there more than 4,999
images stored in the internal
memory or on the memory
card?
c This unit can play, print, save, delete, or
otherwise handle up to 4,999 image files.
• Did you rename the file with c If you named or renamed the file on your
a computer or other device?
computer and the file name includes
characters other than alphanumeric
characters, the image may not be able to
be displayed on this unit.
• Are there five or more levels c This unit cannot display images saved in a
in the folder hierarchy of the
folder that is more than five levels deep.
memory card?
88 GB
Symptom
Check item
The file name is
not displayed
properly.
• Did you rename the file with c If you named or renamed the file on your
a computer or other device?
computer and the file name includes
characters other than alphanumeric
characters, the file name may not be able
to be displayed properly on this unit.
Cause/Solutions
In the Editing
menu, there are
blank areas at the
top and bottom of
the previewed
image.
• Is the previewed image
extremely stretched
vertically or horizontally?
c If an image is extremely stretched
vertically or horizontally, blank areas may
appear in the Editing menu.
c The standard aspect ratio of an image shot
with a digital camera is 3:4. When you use a
device other than this unit to edit or save an
image, it is saved as a more horizontal print
image and its top and bottom edges will be
cut and displayed in black.
The image does
not automatically
rotate when this
unit is set to
portrait
orientation.
• Is the [Auto display
orientation] setting of this
unit set to [OFF]?
• Does the rotation
information on the image
information display say [No
Rotation]?
c Set the [Auto display orientation] setting
to [ON]. (.page 63)
c If the rotation information says [No
Rotation], you can rotate the image
manually. (.page 51)
Saving and deleting images
Symptom
Check item
Cause/Solutions
Cannot save an
image.
• Is the memory card writeprotected?
c Cancel write-protection and try saving
again.
• Is the write-protect switch of c Slide the write-protect switch to the
the memory card in the
enable position.
“LOCK” position?
c Replace the memory card with one with
sufficient free space. Or, delete any
unwanted images. (.page 46)
• Is the internal memory full?
c Delete any unwanted images.
(.page 46)
• Did you save images from a
computer to the internal
memory without making a
folder in the internal
memory?
c If you do not make a folder, you can only
save up to 512 images. In addition, the
number of images may be reduced
depending on the file name length or
character type. When you save images in
the internal memory from a computer, be
sure to make a folder in the internal
memory and save the images in this
folder.
Continued
89 GB
If trouble occurs
• Is the memory card full?
Symptom
Check item
Cause/Solutions
Cannot delete an
image.
• Is the memory card writeprotected?
c Use the device you are using to cancel
write-protection and try deleting again.
• Is the write-protect switch of c Slide the write-protect switch to the
the memory card in the
enable position.
“LOCK” position?
• Are you using a “Memory
Stick-ROM”?
c It is not possible to delete an image from
or format a “Memory Stick-ROM”.
• Is this image protected?
c Check the image information from the
single view mode. (.page 16)
An image with a
mark is set to Read
Only. You cannot delete it on this unit.
An image was
deleted
accidentally.
—
c An image cannot be recovered once it is
deleted.
Remote control
Symptom
Check item
Cause/Solutions
Nothing happens
• Is the battery inserted in the
even if you operate
remote control properly?
the remote control.
—
• Is the protective sheet in the
remote control?
90 GB
c Replace the battery. (.page 20)
c Insert a battery. (.page 20)
c Insert a battery in the proper orientation.
(.page 20)
c Point the top end of the remote control
towards the remote sensor on this unit.
(.page 20)
c Remove any obstruction between the
remote control and the remote sensor.
c Pull the protective sheet out of the remote
control. (. page 20)
Printing
Symptom
Check item
Cause/Solutions
Paper does not
feed.
• Is the print paper properly
set in the paper tray?
c If print paper is not properly loaded, this
unit may develop trouble. (.page 34)
Check the following:
• Insert the correct set of print paper and
ink ribbon.
• Load the print paper in the correct
direction in the tray.
• You can insert a maximum 20 sheets of
print paper into the tray. If the sheets
exceed 20, remove the extra sheets.
• Riffle the print paper thoroughly and
insert it into the tray.
• Do not bend or fold the print paper
before printing, as this may cause
malfunctions of this unit.
c Use print paper designed for this unit. If
• Are you using print paper
you use incompatible print paper, this unit
that was not designed for this
may develop trouble. (.About the
unit?
Print Packs)
The print paper is
ejected without
being printed.
• Is the perforation of the print c Use print paper designed for this unit. If
you use incompatible print paper, this unit
paper removed?
may develop trouble. (.About the
• Are you using print paper
Print Packs)
that was not designed for this
unit?
Printed results
Check item
• Did you print preview image c Depending on the type of digital camera
data?
used, preview images may be displayed
along with the primary images in the
thumbnail list. The printed quality of the
preview images will not be as good as the
primary images. Note that if you delete
the preview images, the data for the
primary images may be damaged.
Cause/Solutions
• Did you print an image
c When an image is displayed in a small
whose size (width or height)
size with a black frame, printing quality is
is smaller than 480 dots?
rough due to this small image size.
• Did you use the Editing
menu to enlarge the image?
c An enlarged image, depending on its
image size, will be printed with
deteriorated picture quality.
Continued
91 GB
If trouble occurs
Symptom
The printed
pictures are
inferior in quality.
Symptom
Check item
Cause/Solutions
The picture quality
and colors of the
image previewed
on the screen
differs from those
printed.
—
c This is not a malfunction, but is caused by
variations in the color reproduction
system or LCD characteristics. Images are
adjusted to best suit the color reproduction
system and characteristics. You can
change the image quality settings as
follows.
– MENU button - [Settings] - [Print
Settings] - [Color Setting] (.page
66)
– Adjusting image quality is only
available in the CreativePrint menu. For
details, see page 59.
The printed image
differs when an
image is printed
directly from the
memory card and
the internal
memory, and
when it is printed
via a computer.
—
c Because of the differences in this unit’s
internal processing and computer software
processing, the printed images will be
different.
The date cannot be • Is [Date Print] set to [Date]
printed.
or [Date/Time]?
c Press MENU button, select [Settings] and
set [Date Print] in the Print Settings to
[Date] or [Date/Time]. (.page 65)
• Does the image support
DCF?
c The Date Print function of this unit
supports an image that is compatible with
the DCF standards.
• Are you printing in
slideshow mode?
c The layout of the LCD screen is printed as
it appears, so the Date Print setting is
invalid.
The date is printed • Is [Date Print] set to [OFF]?
unintentionally.
c Press MENU button, select [Settings] and
set [Date Print] in the Print Settings to
[OFF]. (.page 65)
• Was the date saved with the c When the date was saved with the image,
image when it was shot with
you cannot make a print without a date.
the digital camera?
The image cannot
be printed fully in
the print range.
Borders remain.
92 GB
• Did you select [Border 1] or
[Border 2] for [Borders] in
the Print setup menu?
c Press MENU button, select [Settings] and
set [Borderless] by selecting [Print
Settings] - [Borders]. (.page 65)
• Is the aspect ratio of the
image correct?
c Depending on the type of digital camera
used, the aspect ratio of the recorded
image differs, so the image may not be
printed covering the entire printable area.
Symptom
Check item
Cause/Solutions
Even though
[Borderless] for
[Borders] is
selected in the
Print Settings, the
image is printed
with borders on
both sides.
• Are you printing in
slideshow mode?
c When printing in slideshow mode, the
layout of the LCD screen is printed as it
appears, so the Borderless Print setting is
invalid.
The whole area of
an image cannot
be printed.
• Did you set [Border 1] in the c You can print the whole area of an image
Print Settings?
by selecting [Border 1] in the Print
Settings. (.page 65)
—
c When you use a device other than this unit
to edit or save an image, blank areas
around an image are also saved as part of
image data. Even if you print such data
with the Borderless setting, you cannot
eliminate the borders on both sides of a
print. (.page 65)
The image is
• Is the paper tray inserted
printed at an angle.
properly?
c Re-insert the paper tray firmly straight in
to the end.
There are white
lines or dots on the
printed pictures.
—
c The print head or paper path may be
soiled. Use the supplied cleaning cartridge
and sheet to clean the head and path.
(.page 97)
The picture is too
bright, dark,
reddish, yellowish,
or greenish.
—
c Adjust the image quality on the image
quality adjustment screen.
Adjusting the image quality is only
available in the CreativePrint menu. For
details, see page 59.
Settings
Symptom
Check
Cause/Solutions
The [Borderless]
and [Border 1/2]
setting does not
take effect.
• Are you operating the
CreativePrint menu?
c In the CreativePrint menu, templates are
used and you cannot select border/
borderless prints.
Symptom
The images on the
memory card
inserted to this unit
are not displayed
on the computer.
Check item
Cause/Solutions
—
c This unit does not provide the function for
viewing the memory card images from the
computer.
Continued
93 GB
If trouble occurs
Connecting with a computer
Symptom
You lost the
supplied CD-ROM
and want to obtain
a new one.
The printer driver
cannot be
installed.
Check item
Cause/Solutions
—
• Are you sure that you have
followed the installation
procedures correctly?
c Follow the procedures in the operating
instructions to install the driver (.page
73). If an error occurs, restart your
computer and do the installation
procedures again.
• Is another application
program running?
c Exit all applications and then install the
driver again.
• Did you specify the
CD-ROM as the installation
CD-ROM correctly?
c Double-click “Computer (My Computer)”
and then the CD-ROM icon in the open
window. Follow the procedures in the
operating instructions to install the driver.
—
This unit does not
respond to the
printing order
from the
computer.
94 GB
c Please download the printer driver from
the Customer support web site. Or contact
your Sony dealer.
c The USB driver may not be installed
properly. Follow the operating
instructions to install the USB driver
again.
• Is there an anti-virus
program or other program
running on the system?
c If there is an anti-virus program or other
program running on the system, exit it and
then start installing the driver.
• Did you log on using an
Administrator user account?
c To install the driver, log onto Windows
using an Administrator user account.
—
c If there is no trouble displayed on the
Windows desktop, check this unit’s LCD
screen.
If this unit shows trouble, do the
following:
1. Turn off the 1 (on/standby) button of
this unit.
2. Disconnect the power cable, wait for 5
to 10 seconds, and then connect the
cable again.
3. Restart your computer.
If these do not solve the problem, consult
with your Sony dealer or service facilities.
Symptom
Check item
Cause/Solutions
Even though
• Are you using an application c When using an application other than the
“Borderless” is
software other than PMB?
PMB, an image might be printed with
selected, the image
borders even if you select borderless print.
is printed with
When you can set border/borderless with
borders.
an application, set an image to be printed
fully in the print range even if it is printed
over the range.
No. of prints
specified in the
“Pages Per Sheet”
in the “Layout” tab
of the “Sony DPPF800 Properties”
dialog box does
not match the
actual No. of
prints and printed
results.
—
c Depending on the application you use, the
No. of prints setting of the application you
use may have priority over the setting
specified in the printer driver dialog box.
Colors of the
printed image
from a computer
are different from
those printed from
a memory card.
—
c Since the process in printing an image
from a memory card differs that in
printing from a computer, the colors may
not be exactly identical.
An error stating
“Error was found
while a document
is output to the
USB device.” is
displayed.
—
c Disconnect the USB cable and then
connect it again.
Others
Symptom
Check item
Cause/Solutions
—
c If the ink ribbon does not click into place,
remove it and then re-insert it. Only when
the ink ribbon is too slack to be loaded,
remove the slack. (.page 33)
The ink ribbon
cannot be
removed.
—
c Turn this unit off using the 1 (on/
standby) button and then turn it on again.
After the sound of movement inside this
unit stops, try to remove the ink ribbon. If
this does not solve the problem, contact
Sony service facilities or your Sony
dealer.
95 GB
If trouble occurs
You cannot insert
the ink ribbon
smoothly.
If the paper jams
1
Turn this unit off and then turn it on
again.
Please wait for the print paper to be
ejected automatically.
1 (on/standby)
Print paper
2
3
Remove the ejected print paper
from this unit.
Remove the paper tray and ink
ribbon from this unit and check to
ensure if there is no jammed print
paper inside.
Check to see if
there is jammed
paper. If any,
remove it.
Tips
• If you cannot remove the jammed paper, contact
your Sony dealer.
96 GB
Cleaning
If white lines or period-like dots are printed on
the pictures, the thermal transfer head may be
soiled with the dust accumulated inside this
unit.
Clean inside this unit using the supplied
cleaning cartridge and sheet.
Before you start cleaning this unit, please
remove any memory cards or USB cables from
this unit.
1
2
3
4
Open the ink ribbon compartment
door and if there is an ink ribbon
inserted, remove it.
Insert the supplied cleaning
cartridge into this unit and close the
ink ribbon compartment door.
5
Set the paper tray into this unit and
press PRINT.
The cleaning cartridge and cleaning sheet
will clean inside this unit. After the
cleaning is finished, the cleaning sheet is
automatically ejected.
6
Remove the cleaning cartridge and
sheet from this unit.
Tips
• Keep the cleaning cartridge and cleaning sheet
together for future cleaning. Be careful not to lose
them.
Notes
• If you already enjoy proper printing performances,
cleaning will not improve the printed picture
quality.
• Do not place the cleaning sheet on top of print
paper and carry out cleaning, as this may cause a
paper jam or other troubles.
• If a cleaning does not improve printed picture
quality, please carry out the cleaning process a
couple of times.
• You cannot clean this unit while it is connected to
a computer.
Remove the paper tray from this
unit. If there is print paper in the tray,
remove it.
If the paper jams
Cleaning
Place the cleaning sheet into the
paper tray with the no-imprint side
facing up.
Cleaning sheet
97 GB
memo
98 GB
Miscellaneous
Additional information
99 GB
About the Memory Cards
“Memory Stick” media
Notes on use
Types of “Memory Stick” media
that this unit can use
With this unit, you can use the following types
of “Memory Stick” media.*1
Type of “Memory Stick”
media
Displaying/
Printing/Deleting/
Saving
“Memory Stick” media*2
(Not compatible with
“MagicGate”)
OK
“Memory Stick” media*2
(“MagicGate”
Compatible)
OK*5
“MagicGate Memory
Stick” media*2
OK*5
“Memory Stick PRO”
media*2
OK*5
“Memory Stick PRO-HG”
media*2
OK*5*6
“Memory Stick Micro”
media*3(“M2”*4)
OK*5
*1
*2
*3
*4
*5
This unit supports FAT32. This unit has been
demonstrated as operable with a “Memory Stick”
media with a capacity of 32GB or less
manufactured by Sony Corporation. However, we
do not guarantee the operations of all the “Memory
Stick”.
This unit is equipped with a slot compatible with
both standard-size and Duo-size media. Without a
“Memory Stick Duo” media adaptor, you can use
both a standard-size “Memory Stick” media and
the compact-size “Memory Stick Duo” media.
When using the “Memory Stick Micro” media with
this unit, always insert it into an “M2” adaptor.
“M2” is an abbreviation for “Memory Stick
Micro” media. In this section, “M2” is used to
describe “Memory Stick Micro” media.
Data reading/recording that requires “MagicGate”
copyright protection cannot be performed.
“MagicGate” is the general name of a copyright
100 GB
*6
protection technology developed by Sony using
authentication and encryption.
This unit does not support 8 bit parallel data
transfer.
• Do not insert more than one “Memory Stick”
media at the same time, which may cause
trouble with this unit.
• When using the “Memory Stick Micro”
media with this unit, always insert it into an
“M2” adaptor.
• If you insert a “Memory Stick Micro” media
into this unit without an “M2” adaptor, you
may be unable to remove the “Memory Stick
Micro” media.
• If you insert the “Memory Stick Micro”
media into an “M2” adaptor, and insert the
“M2” adaptor into a “Memory Stick Duo”
media adaptor, this unit may not operate
properly.
• When you format a “Memory Stick” media,
use the format function of your digital
camera. If you format a “Memory Stick”
media with your computer, images may not
be displayed properly.
• When you format a “Memory Stick” media,
all the data including the protected image
files will be erased. To avoid erasing
important data by accident, make sure to
check the contents of the “Memory Stick”
media before formatting.
• You cannot record, edit or delete data if you
slide the write-protect switch to LOCK.
• Do not attach any other material than the
supplied label on the labeling position. When
you attach the supplied label, be sure to
attach it to the labelling position. Be careful
that the label does not stick out.
SD memory card
The SD memory card/xD-Picture Card dualformat slot of this unit allows you to use the
following:
• SD memory card*1
• miniSD memory card, microSD memory
card
(An adaptor is necessary.)*2
• SDHC memory card*3
• miniSDHC memory card, microSDHC
memory card
(An adaptor is necessary.)*2
• MMC standard memory card*4
We do not guarantee proper operations for all
types of SD memory cards and MMC standard
memory cards.
*1
*2
*3
*4
xD-Picture Card
With the SD memory card/xD-Picture Card
dual-format slot of this unit, you can use an xDPicture Card*5. Not all the memory card
operations are supported and we do not
guarantee proper operations for all types of xDPicture Card.
*5
This unit has been demonstrated as operable with
an xD-Picture Card with a capacity of 2 GB or
smaller.
This unit has been demonstrated as operable with
an SD memory card with a capacity of 32 GB or
smaller.
Some commercially available card adaptors have
projected terminals on the rear. This type of
adaptor may not work properly with this unit.
This unit has been demonstrated as operable with
an SDHC memory card with a capacity of 32 GB
or less.
This unit has been demonstrated as operable with
an MMC standard memory card with a capacity of
2 GB or less.
Notes on use
Data reading/recording that requires copyright
protection cannot be performed.
101 GB
Additional information
Continued
Notes on using memory card
• Be sure that the orientation of the card and
the slot are correct. Inserting the card
incorrectly or in the wrong slot may damage
this unit.
• Inserting a memory card with unnecessary
force may damage the memory card or this
unit.
• Do not remove a card or turn off this unit
while this unit is reading or accessing data,
or the access indicator is flashing.
• We recommend that you save backup of the
important data.
• The data processed with the computer may
not be played with this unit.
• When you carry or store a card, put it in the
case supplied with it.
• Do not touch the terminal of a card with your
hand or a metal object.
• Do not strike, bend or drop a card.
• Do not disassemble or modify a card.
• Do not expose a card to water.
• Do not use or store a card under the
following conditions:
– Locations beyond the required operational
conditions including locations such as the
hot interior of a car parked in the sun or/
and in the summer, the outdoors exposed
to direct sunlight, or a place near a heater
– Humid locations or locations with
corrosive substances present
– Locations subject to static electricity or
electrical noises
102 GB
Specifications
x Digital photo printer/frame
Continued
103 GB
Additional information
Printing method
Dye sublimation printing (yellow/
magenta/cyan 3 pass)
Print resolution
300 (H) dpi × 300 (V) dpi
Image processing per dot
256 Tones (8 bits each for yellow/
magenta/cyan)
Printing range
1,800 dots × 1,200 dots
Printing size
101.6 mm × 152.4 mm (4 × 6) in.
(maximum, borderless)
Printing speed (per sheet)*1 *2
Internal memory*3/Memory card*4:
Approx. 63 sec.
PC*5: Approx. 60 sec.
Ink ribbon/Print paper
tRefer to supplied “About the Print
Packs.”
LCD screen
LCD panel:
20 cm/8 inches, TFT active matrix
Total number of dots:
1,152,000 dots
(800 × 3 (RGB) × 480) dots
Effective display area
Display aspect ratio:
16:10
LCD screen area:
Approx. 19.3 cm/7.6 inches
Total number of dots:
1,069,080 dots
(755 × 3 (RGB) × 472) dots
LCD backlight life
20,000 hours
(before brightness of the backlight is
reduced to half)
Input/Output connectors
USB connector (TypeB, Full-Speed USB)
Slots
“Memory Stick” slot (Standard/Duo)/
SD memory card slot/
xD-Picture Card slot/MMC card slot
Compatible image file formats
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF*6
TIFF: Exif 2.21 compatible
BMP*7: 1, 4, 8, 16, 24, 32 bit Windows
format
(Some image file formats are not
compatible.)
Max. no. of pixels that can be displayed
and printed
8,000 (H) dots × 6,000 (V) dots*8
File system
FAT12/16/32
Image file name
DCF format, 256 characters within 5th
hierarchy
Maximum number of files that can be
handled
4,999 files in the internal memory or on
the memory card
Internal memory capacity*9
Approx. 256 MB
(Approx. 500 images*10 can be saved.)
Power requirements
DC IN jack, DC 24V
Power consumption
80 W (maximum)
On standby mode: less than 1 W
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Dimensions
Placed sideways:
Approx. 231 mm × 157 mm × 113 mm
(w/h/d) (9 1/8 × 6 1/4 × 4 1/2) in.
Placed vertically:
Approx. 157 mm × 231 mm × 121 mm
(w/h/d) (6 1/4 × 9 1/8 × 4 7/8) in.
Print position (flat):
LCD screen opened:
Approx. 231 mm × 208 mm × 154 mm
(w/h/d) (9 1/8 × 8 1/4 × 6 1/8) in.
Depth with paper tray attached:
Approx. 301 mm (11 7/8) in.
LCD screen closed:
Approx. 231 mm × 88 mm × 157 mm
(w/h/d) (9 1/8 × 3 1/2 × 6 1/4) in.
Depth with paper tray attached:
Approx. 310 mm (12 1/4) in.
Mass
Approx. 1.5 kg (3lb 4 7/8 oz)
(excluding the paper tray (Approx.
115g (4 oz), ink ribbon and AC
Adaptor)
Included accessories
See “Checking included items” on
page 12.
x AC Adaptor
*Either one of these adaptors is
included.
AC-S2422
Power requirements
- 100 V to 240 V, 50 Hz/60 Hz
1.5 A to 0.75 A
Rated output voltage
24 V 2.2 A
Peak 3.7 A - 9.2 s
Dimensions
Approx. 60 mm × 30.5 mm × 122 mm
(2 3/8 × 1 1/4 × 4 7/8) in. (w/h/d)
(excluding the protruding parts and
cables)
Mass
Approx. 305 g (11 oz)
AC-P2430Z
Power requirements
- 100 V to 240 V, 50 Hz/60 Hz
1.5 A to 0.75 A
Rated output voltage
24 V 3.0 A
Peak 3.7 A - 9.2 s
104 GB
Dimensions
Approx. 57 mm × 30.5 mm × 136.5 mm
(2 1/4 × 1 1/4 × 5 3/8) in. (w/h/d)
(excluding the protruding parts and
cables)
Mass
Approx. 320 g (11 1/4 oz)
See the label of AC Adaptor for more details.
Design and specifications are subject to change
without notice.
*
Estimated No. of prints is about 2,000 sheets (P
size). For the total No. of prints, see [System
Information] in the Settings menu.
*1: Average time from the PRINT being pressed to the
printed paper coming out. (Time may vary with the
size and format of image data and operating
conditions.)
*2: Print settings: [Borders] is set to [Borderless],
[Date Print] is set to [OFF], and [Auto Fine Print7]
is set to [ON].
*3: Images shot on a Sony digital still camera with an
effective pixel count of approximately 12,100,000
(file size about 4.1 MB) and stored on the internal
memory with this unit set to [Resize] (file size
about 400 KB). (page 64)
*4: Images in *3 stored on a Sony “Memory Stick PRO
Duo”. Printed from the “Memory Stick PRO Duo”
in the slot of this unit.
*5: Excluding data processing and transferring time.
*6: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format
*7: You cannot use the Picture Motion Browser
(PMB) for printing.
*8: 17 dots or more are required both vertically and
horizontally. An image with an aspect ratio of 20:1
or more may not be displayed properly. Even if the
aspect ratio is less than 20:1, display problem may
occur in thumbnails, slideshow or other occasions.
*9: The capacity is calculated as 1 MB is equivalent to
1,000,000 bytes. The actual capacity is reduced as
files for management and applications are
included. Approximately 190 MB.
*10: The number of stored images is an approximate
guide when resizing and importing images.
When resizing and importing images, they are
automatically resized to about 2,000,000 pixels.
This varies depending on the subject and shooting
conditions.
Customer support home page
The latest support information is available at the
following home page address:
http://www.sony.net/
On trademarks and copyrights
•
, Cyber-shot,
, “Memory
, “Memory Stick Duo,”
, “MagicGate Memory
Stick,” “Memory Stick PRO,”
, “Memory Stick PRO
Duo,”
, “Memory Stick
PRO-HG Duo,”
,
“Memory Stick Micro,”
,
, “Memory Stick-ROM,”
,
“MagicGate,” and
are
trademarks or registerd trademarks of Sony
Corporation.
Stick,”
• Microsoft, Windows, Windows Vista and DirectX
are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or
other countries.
• Macintosh and Mac OS are registered trademarks of
Apple Inc. in the United States and/or other
countries.
• Intel and Pentium are the registered trademarks or
trademarks of Intel Corporation.
•
•
•
•
•
•
•
On safety
• Be careful not to set or drop any heavy
objects on the power cord, or to damage the
power cord in any way. Never operate this
unit with a damaged power cord.
• Should any solid object or liquid fall into the
cabinet, unplug this unit and have it checked
by qualified personnel before operating it
any further.
• Never disassemble this unit.
• To disconnect the power cord, pull it out by
the plug. Never pull the power cord itself.
• When this unit is not going to be used for an
extended period of time, disconnect the
power cord from the wall outlet.
• Do not handle this unit roughly.
• To reduce the risk of electrical shock, always
unplug this unit from the electrical outlet
before cleaning and servicing this unit.
• Do not block the ventilation window.
If the ventilation window is blocked, heat
builds up inside this unit and may cause fire
or a malfunction. Always do the following to
ensure good ventilation.
• Place this unit 20 cm or further from a wall.
• Do not place it in a tight space.
• Do not place it on a deep-pile carpet, blanket
or anything that this unit might sink into
when placed on top.
• Do not wrap it in cloth.
• Do not use it on its side or upside down.
• Do not touch or peer into the paper ejecting
slot. Paper may suddenly come out and cause
an injury.
• Do not lift this unit by holding the electrical
cord, connecting cord, paper tray, ink ribbon
compartment door or LCD screen. You may
drop it, which may cause damage to the unit
or physical injury.
Continued
105 GB
Additional information
•
or xD-Picture Card™ is a trademark of
FUJIFILM Corporation.
Contains iType™ and fonts from Monotype
Imaging Inc. iType™ is a trademark of Monotype
Imaging Inc.
SD and SDHC Logos are trademarks of SD-3C,
LLC.
Libtiff
Copyright © 1988 - 1997 Sam Leffler
Copyright © 1991 - 1997 Silicon Graphics, Inc.
Lua
Copyright © 1994-2008 Lua.org, PUC-Rio.
Full FreeType License
Copyright 1996-2002, 2006 by David Turner,
Robert Wilhelm, and Werner Lemberg
All other companies and product names mentioned
herein may be the trademarks or registered
trademarks of their respective companies.
Furthermore, “™” and “®” are not mentioned in
each case in this manual.
Other trademarks and trade names are those of their
respective owners.
Precautions
On installation
• Avoid placing this unit in a location subject
to:
– vibration
– humidity
– excessive dust
– direct sunlight
– extremely high or low temperatures
• Do not use electrical equipment near this
unit. This unit will not work properly in
electromagnetic fields.
• Do not place heavy objects on this unit.
• Leave enough room around the printer so
that the ventilation holes are not blocked.
Blocking these holes may cause internal heat
build-up.
On the AC Adaptor
• Even if this unit is turned off, AC power
(house current) is still supplied to it while it
is connected to the wall outlet via the AC
Adaptor.
• Be sure to use the AC Adaptor supplied with
this unit. Do not use other AC Adaptors, as
this may cause a malfunction.
• Do not use the supplied AC Adaptor for
other devices.
• Do not use an electrical transformer (travel
converter), as this may cause overheating or
a malfunction.
• In case the cord of the AC Adaptor is
damaged, do not use it any longer, as this
may be dangerous.
Do not damage the AC Adaptor
Damaging the AC Adaptor may result in fire or
electrical shock.
• Do not modify or cut it.
• Do not place a heavy object on it or pull it.
• Keep it away from heating devices. Do not
let it get hot.
• Always unplug this unit by holding the plug
and pulling it.
106 GB
If the AC Adaptor is damaged, consult your
Sony dealer or Sony customer center.
On moisture condensation
If this unit is brought directly from a cold
location to a warm location or placed in an
extremely warm or humid room, moisture may
condense inside the unit. In such cases this unit
will probably not work properly and may even
develop a fault if you persist in using it. If
moisture condensation occurs, unplug the
power cord of this unit and do not use this unit
for at least one hour.
On transport
When you transport this unit, remove the ink
ribbon, paper tray, memory card, AC Adaptor,
and connected cables from this unit and put this
unit and its peripherals in the original box with
the protective packaging.
If you no longer have the original box and
packing parts, use similar packing material so
that this unit will not be damaged while being
transported.
On cleaning
Clean this unit with a soft dry cloth, or a soft
cloth lightly moistened with a mild detergent
solution. Do not use any type of solvent, such
as alcohol or benzine, which may damage the
finish.
On CD-ROM
Do not play back the supplied CD-ROM on a
music CD player.
Doing so may cause hearing loss or damage
speakers or earphones and cause malfunction.
When disposing of this unit
Formatting of this unit may not erase the data
in the internal memory completely. When you
dispose of this unit, we recommend that you
physically destroy this unit.
Notes on disposal of this unit
Data stored on the internal memory of this unit
may not be deleted completely by [Format
internal memory]. Sony recommends that you
physically destroy this unit before disposal.
Additional information
107 GB
Index
Symbols
“Memory Stick” media
Inserting 25
Types 100
A
AC Adaptor 22
AC power source 22
Adjusting an image 59
Associated file 17
Auto Fine Print7 66, 79
Auto power ON/OFF 51, 63
B
Batch Print 60
Borders/Borderless 54, 65,
79
Brightness 59
C
Calendar 29, 55
Canceling printing 80
Changing the settings 61
Cleaning 97, 107
Color Setting 41, 66
Connecting
AC power source 22
Computer 70
CreativePrint 55
D
Date Print 54, 65
Date/time Settings 24, 63
DC IN 24V 22
DCF (Design rule for
Camera File system) 65
Deleting an image 46
DPOF 60
108 GB
E
N
Editing an image 58
Enlarge and reducing an
image size 50
Exporting an image 45
No. of print 36
F
Format internal memory 47,
64
G
General Settings 63
I
ID photo 57
Image import size 64
Importing to the internal
memory 42
Index image display 31
Index Print 60
Initial state 24
Initialize 62, 64
Inserting a memory card 25
Inserting an ink ribbon 33
Inserting the print paper 34
Installing
PMB (Picture Motion
Browser) 75
Printer driver 73
L
Language setting 64
Layout print 57
LCD screen 13
M
Memory cards
Inserting 25
Memory cards Notes on use
102
Monochrome 41, 58
Moving an image 58
O
On/standby button 14, 15
Orientation 78
P
Paper jams 96
Placing in portrait or
landscape orientation 21
Playback device 44
PMB (Picture Motion
Browser) 75
Precautions 105, 106
Print All 60
Printing
Calendar 55
From a commercially
available application 80
From a computer 73
ID photo 57
Layout print 57
Memory card images 36
Using the PMB (Picture
Motion Browser) 76
Protection information 17
R
Registering a browsing
folder 80
Remote control 20
Removing a memory card
26
Replacing the battery of the
remote control 20
Rotating an image 51
S
Saturation 59
Saving the image 59
SD memory Card
Inserting 25
Types 101
Sepia 41
Setting the No. of print 36
Sharpness 59
Single view mode 30
Slideshow display 28
Slideshow Settings 41
Color effect 41
Display Mode 41
Effect 41
Interval 41
Shuffle 41
Sorting images 49
Specifications 103
Supplied accessories 12
System requirements
Macintosh 68
Windows 68
T
Tint 59
U
Uninstalling
PMB (Picture Motion
Browser) 76
Printer driver 75
USB cable 70, 74
W
Write-protect switch 100
X
Additional information
xD-Picture Card
Inserting 25
Types 101
Z
Zooming an image in/out 50
109 GB
memo
110 GB
memo
111 GB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising