Sony KE-42M1, WEGA KE-42M1 User's manual

Sony KE-42M1, WEGA KE-42M1 User's manual
2-148-216-11(1)
Making Video Connections
KE-42M1
Best Video
Performance
Quick Setup Guide
The remote control is preset to operate Sony brand video equipment.
Connector type
Sony Equipment
Programmable Code Number
DVD/VCR
701 (Sony Dream System)
Component
SAT/Cable
801 (Satellite Cable Box)
S VIDEO
If you have video equipment other than Sony brand that you want to
control with the TV’s remote control, use the following procedures to
program the remote control.
HDMI
Please follow the steps to setup your TV:
Composite
RF/Coaxial
1
4 Programming the
Remote Control
Your TV includes several types of video inputs. Use the inputs that
are available on your components that provide the best video
performance, as described below.
zzzzzzzz
2
zzzzzzzz
3
zzzzzzzz
4
Note
The equipment must have infrared (IR) remote capability in order to be used with this
remote control.
Good Video
Performance
Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)
Additional Connections
Checking the
Supplied Accessories
Connecting your TV
(See diagram on reverse)
Tuning Your TV
Automatically
Programming
the Remote Control
5
For best audio performance, connect your digital audio components
using either digital optical or digital coaxial audio connections.
Depending on which components are in your system, you may need
to complete additional connections. For example, if you have a
satellite receiver, you’ll need to connect the satellite antenna. If you
have an A/V receiver, you’ll need to connect speakers.
The connection diagrams shown in the reverse side are
recommendations only; other possible solutions may exist.
Connections that include an A/V receiver can often be very
complex, so check your A/V receiver’s instruction manual for
additional details.
If your product is not working properly
DO NOT RETURN TO THE STORE.
For service and technical assistance
Call our Customer Information Service Center (Toll Free):
1-800-222-7669 for US residents.
1-877-899-SONY (7669) for Canadian residents.
DVD/
MUTING VCR
1 Press the DVD/VCR (FUNCTION) and RESET
buttons simultaneously, or press the SAT/CABLE
(FUNCTION) and RESET buttons simultaneously.
SAT/ POWER
CABLE
MODE
PICTURE WIDE SLEEP DISPLAY
2 Press the function button you want to program.
3
FREEZE
FAVORITES
MENU
To program a cable box or a satellite receiver
Press SAT/CABLE (FUNCTION).
To program video equipment
Press DVD/VCR (FUNCTION).
4
TOP MENU
3 Enter the three-digit manufacturer’s code number
using the 0-9 buttons.
F1
F2
1, 2
TV VIDEO 1/2/3 VIDEO 4 VIDEO 5
4 Press ENT (enter).
5 To check if the code number works, aim the TV’s
remote control at the equipment and press DVD/
VCR and/or SAT/CABLE (POWER) that corresponds with that equipment. If it responds, the
programming is completed. If not, try using the
other codes listed for that manufacturer.
RESET PIC OFF MTS/SAP
GUIDE
TV/SAT
1
Sony Corporation © 2004 Printed in JAPAN
Tips
1 Checking the
Supplied Accessories
Remote control (RM-Y1003) (1)
and size AA batteries (2)
2 Connecting your TV
• Review the following chart to determine which diagram to use to
connect the components in your system:
For these components
75-ohm coaxial cable (1)
AC power cord (1)
• Clamp screws (2)
• Plug Holder for AC Power Cord (1)
• Cleaning Cloth (1)
• Operating Instructions (1)
• Quick Setup Guide (1)
• Warranty Card (1)
See diagram
on reverse
A
B
C
D
E
F
Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by matching the e and E on
the batteries to the diagram inside the remote control’s battery
compartment.
• See the “Cables Required” chart that appears with the diagram to
determine which cables you’ll need. You may need to purchase
extra accessories, such as cables and splitters, depending on the
components you plan to connect.
• Turn off and unplug all components before making connections.
• If you are connecting a digital cable box, you’ll need a special bidirectional splitter that’s compatible with your cable box. Contact
your cable provider for details.
• If more than one code number is listed, try entering them one by
one until you come to the correct code for your equipment.
• If you enter a new code number, the code number you
previously entered at that setting is erased.
3 Tuning Your TV
Automatically
1
2
Manufacturer’s codes
DVD
Press 1 (Power) on the TV.
The Auto Setup menu automatically appears on the screen when
you turn on the TV for the first time.
Press CH+ on the remote control or on the drop down panel of
your TV to perform Auto Program.
When all the receivable channels are stored, the “Channel Skip/
Add” menu appears.
Auto Program is set to scan cable TV channels by default. To watch
VHF/UHF channels with an antenna, see “To watch VHF/UHF
channels with an antenna” in the operating instructions.
Manufacturer
Code
Manufacturer
Fisher
330, 335
Sylvania
308, 309, 338, 310
Funai
338
Symphonic
338
332
Manufacturer
Code
General Electronics
329, 304, 309
Tashiro
Sony
751
Go Video
322, 339, 340
Tatung
314, 336, 337
General Electric
755
Goldstar
332
Teac
314, 336, 338, 337
Hitachi
758
Hitachi
306, 304, 305, 338
Technics
309, 308
JVC
756
Instant Replay
309, 308
Toshiba
312, 311
Magnavox
757
JC Penney
309, 305, 304, 330,
314, 336, 337
Wards
327, 328, 335, 331,
332
JVC
314, 336, 337, 345,
346, 347
Yamaha
314, 330, 336, 337
Zenith
331
Mitsubishi
761
Panasonic
753
Philips
757
Pioneer
752
RCA, Proscan
755
Samsung
758
Toshiba
Zenith
Kenwood
314, 336, 332, 337
LG
332
LXI (SEARS)
332, 305, 330, 335,
338
Manufacturer
Code
754
Magnavox
308, 309, 310
Sony
230
760
Marantz
314, 336, 337
Hamlin/Regal
Marta
332
222, 223, 224, 225,
226
Jerrold, G.I.
201, 202, 203, 204,
205, 206, 207, 208,
218, 222
227, 228, 229
DVD changer
Memorex
309, 335
Manufacturer
Code
Minolta
305, 304
Sony
765
Panasonic
766
323, 324, 325, 326
Oak
Multitech
325, 338, 321
Panasonic
219, 220, 221
NEC
314, 336, 337
Pioneer
214, 215
Olympic
309, 308
Scientific Atlanta
209, 210, 211
Optimus
327
Tocom
216, 217
Zenith
212, 213
DVD 5.1ch
1 Press MENU.
Manufacturer
Code
Orion
317
Sony (DAV)
601, 602, 603, 604
Panasonic
308, 309, 306, 307
Pentax
305, 304
Philco
308, 309
(Channel), then press
3 Press V/v to select “Auto Program,” then press
.
VCR
.
4 Press “OK.”
“Auto Program” appears and the TV starts scanning and
presetting channels automatically. When all the receivable
channels are stored, the “Channel Skip/Add” menu appears.
Using this menu, you can start skipping unwanted channels (see
“To skip channels” in the operating instructions).
5 Press MENU to exit the menu screen.
Code
Philips
308, 309, 310
Sony
301, 302, 303
Pioneer
308
Admiral (M. Ward)
327
Quasar
308, 309, 306
Aiwa*
338, 344
RCA/PROSCAN
304, 305, 308, 309,
311, 312, 313, 310,
329
Manufacturer
Audio Dynamic
314, 337
Broksonic
319, 317
Realistic
309, 330, 328, 335,
324, 338
Canon
309, 308
Citizen
332
Sansui
314
Craig
302, 332
Samsung
322, 313, 321
Curtis Mathes
304, 338, 309
Sanyo
330, 335
Daewoo
341, 312, 309
Scott
DBX
314, 336, 337
312, 313, 321, 335,
323, 324, 325, 326
Dimensia
304
Sharp
327, 328
319, 320, 316, 317,
318, 341
Signature 2000 (M.Ward) 338, 327
Emerson
Cable Box
Mitsubishi/MGA
If you need to perform Auto Program again
2 Press V/v to select
Code
SV 2000
338
Satellite Receiver
Manufacturer
Code
Sony
801
Dish Network
810
Echostar
810
General Electric
802
Hitachi
805
Hugues
804
Mitsubishi
809
Panasonic
803
RCA/PROSCAN
802, 808
Toshiba
806, 807
* If an Aiwa VCR does not
work even though you enter
the code for Aiwa, enter the
code for Sony instead.
A
Cables Required
Splitter
Coaxial
Composite
Component
Audio
Use this diagram if you have;
1
4
2
1
1
B
Cables Required
Splitter
Coaxial
Composite
Component
Audio
Use this diagram if you have;
1
4
3
1
2
Cable
If your DVD player or satellite receiver
has a HDMI jack, use that instead of the
video connections shown here.
Rear of TV
Rear of TV
1
VIDEO IN
3
DVD Player
HD/DVD IN
4
Y
S VIDEO
1
DVD Player
HD/DVD IN
4
Y
S VIDEO
Cable Box or
Satellite Receiver
CENTER
SPEAKER IN
180W (6 ) MAX
PB
VIDEO
L
IN
If you are not using a
cable box, connect your
cable or antenna to the
VCR’s RF IN jack.
Rear of TV
VIDEO IN
3
1
R
L
AUDIO IN
AUDIO OUT
VAR/FIX
Y
S VIDEO
PR
L(MONO)
AUDIO
R
R
PR
OUT
L
L(MONO)
AUDIO
R
AUDIO OUT
VAR/FIX
INPUT
DVD
VCR
TV
VIDEO
VIDEO
OUT
LINE IN
R
LINE OUT
OUT
R
L
AUDIO
CABLE IN
ANT IN
SAT IN
OUT TO TV
R
AUDIO OUT
VAR/FIX
VCR
LINE OUT
R
L
AUDIO
LINE IN
IN
L
LINE IN
IN
L(MONO)
AUDIO
R
VCR
A/V
VCR
IN
IN
OUT
L
L(MONO)
AUDIO
R
Cable Box
CENTER
SPEAKER IN
180W (6 ) MAX
PB
5
VIDEO
VIDEO
HD/DVD IN
4
OUT
L(MONO)
AUDIO
R
R
Splitter
IN
PR
L(MONO)
AUDIO
R
DVD Player
Cable Box or
Satellite Receiver
CENTER
SPEAKER IN
180W (6 ) MAX
1
5
3
1
1
1
Cable
If you are not using a
cable box or satellite
receiver, connect your
cable or antenna to the
VCR’s RF IN jack.
PB
VIDEO IN
3
Splitter
Coaxial
Composite
Component
HDMI
Audio
Use this diagram if you have;
Splitter
Splitter
If you are not using a
cable box or satellite
receiver, connect your
cable or antenna to the
VCR’s RF IN jack.
Cables Required
If your DVD player or satellite receiver
has a HDMI jack, use that instead of the
video connections shown here.
Cable
If your DVD player or satellite receiver
has a HDMI jack, use that instead of the
video connections shown here.
C
VIDEO
LINE IN
IN
LINE OUT
AUDIO
OUT
OUT
R
L
AUDIO
LINE OUT
Satellite
VIDEO
OUT
R
L
AUDIO
VIDEO
VIDEO
Sat
Antenna
Cable
D
Cables Required
Splitter
Coaxial
Composite
Component
Audio
Use this diagram if you have;
1
4
4
1
2
Splitter
Coaxial
Composite
Component
HDMI
Audio
Use this diagram if you have;
Splitter
1
VIDEO IN
3
HD/DVD IN
4
Y
S VIDEO
PB
VIDEO
L(MONO)
AUDIO
R
L
R
1
AUDIO OUT
VIDEO IN
3
VAR/FIX
R
L
AUDIO IN
HD/DVD IN
4
Y
S VIDEO
PB
5
High Definition
Cable Box
CENTER
SPEAKER IN
180W (6 ) MAX
VIDEO
L(MONO)
AUDIO
R
Dream
System
1
VIDEO 1
R
AUDIO OUT
L
VIDEO 2
VIDEO OUT
AUDIO IN
L
R
MONITOR OUT
VIDEO IN
Digital Recorder
R
HD/DVD IN
4
Y
S VIDEO
PB
OUT
L(MONO)
AUDIO
R
VIDEO IN
3
IN
PR
L
If you are not using a
cable box or satellite
receiver, connect your
cable or antenna to the
VCR’s RF IN jack.
Rear of
TV
IN
R
L
AUDIO IN
VIDEO
VIDEO IN
Y
PB/CB
VAR/FIX
IN
PR
OUT
PR/CR
COMPONENT VIDEO OUT
AUDIO OUT
Cable Box or
Satellite Receiver
CENTER
SPEAKER IN
180W (6 ) MAX
S VIDEO
L(MONO)
AUDIO
R
L
R
L(MONO)
AUDIO
R
AUDIO OUT
VAR/FIX
LINE IN
IN
L
R
LINE OUT
OUT
AUDIO
VIDEO
VCR
A/V
INPUT
DVD
VCR
TV
VIDEO
L
R
AUDIO
OUT
VCR
VCR
VIDEO
OUT
LINE IN
IN
LINE IN
LINE OUT
OUT
1
4
2
1
1
Splitter
If your cable box has
a DVI jack, use that
instead of the video
connections shown
here.
Rear of TV
OUT
L(MONO)
AUDIO
R
Splitter
Coaxial
Composite
Component
Video
Use this diagram if you have;
Cable
IN
PR
Cables Required
Splitter
DVD Player
Cable Box or
Satellite Receiver
CENTER
SPEAKER IN
180W (6 ) MAX
1
4
1
1
1
1
F
Cable
If you are not using a
cable box or satellite
receiver, connect your
cable or antenna to the
VCR’s RF IN jack.
Rear of TV
DVD Player
Cables Required
If your DVD player or satellite receiver
has a HDMI jack, use that instead of the
video connections shown here.
Cable
If your DVD player or satellite receiver
has a HDMI jack, use that instead of the
video connections shown here.
E
R
L
AUDIO
VIDEO
LINE IN
IN
LINE OUT
OUT
R
L
AUDIO
VIDEO
LINE IN
IN
LINE OUT
OUT
R
L
AUDIO
VIDEO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement