Sony Microphone ECM-MS957 User manual

Sony Microphone ECM-MS957 User manual
Pin out:
an —
S O NY. 3-859-112-12(1)
Electret Condenser
Stereo Microphone
Operating Instructions
Mode d'emploi
Bedienungsanleitung
Manual de instrucciones
Gebruiksaanwijzing
Istruzioni per l'uso
ECM-MS957
Sony Corporation O 1996 Printed in Japan
- Common
- Right....ring
- Common
- Left...tip
- Common
Before operating the unit, please read this manual thoroughly and retain it for
future reference.
a
Features
This microphone is suitable for use in a variety of situations such as at concerts
or conferences with digital recording equipment (Sony DAT, MD, NT(Digital
Microcorder), etc.).
* The turning capsule function allows both vertical and horizontal sound pick-
up.
* The Mid-Side Stereo System provides a natural sound pick up, delivering a
stereo sound image with superb clarity.
* The directive angle (between left and right channels) can be set to 90% or 120%
according to the sound source.
E
Precautions
* The microphone should never be dropped or subjected to strong shock.
* Keep the microphone away from areas with extremely high temperatures and
humidity (above 60°C or 140°F).
If the microphone is placed near loudspeakers, an accoustic feedback (howling
effect) may occur. If this happens, place the microphone as far away as
possible from the loudspeakers, change the direction of the microphone or
decrease the speaker volume until the howling stops.
Specifications
General
Type One-point stereo (employing the Mid-side stereo system),
electret condenser microphone
Microphone cord 4 mm diameter, two core-shielded OFC (Oxygen- free
copper) cord with Canon XLR-5-12C type connector and '
gold ated L-shaped stereo miniplug 6 " 6 Co rd
Stand screw PF 1/2 screw
Dimensions Approx. 40 x 183 mm (diameter x length) (1 °/8 x 7 !/4 in.),
projecting parts and controls not included.
Mass Approx. 330 g (11.7 oz.) including battery and cord
Supplied accessories Wind screen (1)
Microphone holder (PF '/2 screw) (1)
Microphone stand (1)
Carrying case (1)
Performance
Frequency response 50 — 18,000 Hz
Directivity Unidirectional x 2 (Directive angle: 90° or 120°) (switchable)
Output impedance 600 ohm + 30% unbalanced
Sensitivity(directive angle 120°)
Open circuit output voltage ‘: 42 +3 dB
Effective output level "*: —45. 8 + 3 dBm
Difference between L and R channel sensitivity: Less than
3dB
Power requirements Normal operating voltage: 1.5 V, R6 (Size AA) battery
Minimum operating voltage: 1.1 V, R6 (Size AA) battery
Battery life: Approx. 2,000 hours with Sony R6P (SR)
battery
Maximum sound pressure level input >
More than 115 dBspr
Т \ч ут ал ran mo Maro than an AR
aecrease Ne Speaker volume until tne nowliing STOPS.
Specifications
General
Type One-point stereo (employing the Mid-side stereo system),
electret condenser microphone
Microphone cord 4 mm diameter, two core-shielded OFC (Oxygen- free
copper) cord with Canon XLR-5-12C type connector and
gold plated L-shaped stereo miniplug
Stand screw PF 1/2 screw
Dimensions Approx. 40 x 183 mm (diameter x length) (1 */8 x 7 !/4 in.),
projecting parts and controls not included.
Mass Approx. 330 g (11.7 oz.) including battery and cord
Supplied accessories Wind screen (1)
Microphone holder (PF ! /2 screw) (1)
Microphone stand (1)
Carrying case (1)
Performance
Frequency response 50 — 18,000 Hz
Directivity Unidirectional x 2 (Directive angle: 90° or 120°) (switchable)
Output impedance 600 ohm + 30% unbalanced
Sensitivity(directive angle 120°)
Open circuit output voltage '!: —42 + 3 dB
Effective output level 2: 45.8 + 3 dBm
Difference between L and R channel sensitivity: Less than
зав
Power requirements Normal operating voltage: 1.5 V, R6 (Size AA) battery
Minimum operating voltage: 1.1 V, R6 (Size AA) battery
Battery life: Approx. 2,000 hours with Sony R6P (SR)
battery
Maximum sound pressure level input
More than 115 dBspL
Dynamic range More than 90 dB
Operating temperature range
0°C — 40°C (32°F — 104°F)
*1 0 dB = 1 v/Pa, 1,000 Hz (1 Pa = 10 ubar = 94 dBspL)
*2 0 dBm = 1 MmW/Pa, 1,000 Hz
*3 1% wave distortion at 1,000 Hz. (0 dBspL = 2 x 10° Pa)
Design and specifications are subject to change without notice.
ECM-MS957
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement