Sony MZ-RH910 Portable MD Recorder Service Manual
Below you will find brief information for MZ-RH910. This portable MD recorder lets you record and playback MiniDiscs in various modes (Hi-MD, MD, ATRAC3plus, ATRAC3, ATRAC, Linear PCM, MP3). It offers different recording and playback times depending on the codec and disc type. The device includes a USB connection for computer transfer and various input/output jacks.
Advertisement
Advertisement
SERVICE MANUAL
MZ-RH910
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Tourist Model
US and foreign patents licensed from Dolby Laboratories.
• SonicStage is trademark or registered trademark of Sony Corporation.
• MD Simple Burner, OpenMG, “MagicGate”, “MagicGate Memory
Stick”, “Memory Stick”, Hi-MD, Net MD, ATRAC, ATRAC3,
ATRAC3plus and their logos are trademarks of Sony Corporation.
• Microsoft, Windows, Windows NT and Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and /or other countries.
• IBM and PC/AT are registered trademarks of International Business
Machines Corporation.
• Macintosh is a trademark of Apple Computer, Inc. in the United States and/ or other countries.
• Pentium is a trademark or registered trademark of Intel Corporation.
• All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders.
• ™ and ® marks are omitted in this manual.
• CD and music-related data from Gracenote, Inc., copyright © 2000-
2004 Gracenote. Gracenote CDDB® Client Software, copyright 2000-
2004 Gracenote. This product and service may practice one or more of the following U.S. Patents: #5,987,525; #6,061,680; #6,154,773,
#6,161,132, #6,230,192, #6,230,207, #6,240,459, #6,330,593, and other patents issued or pending. Services supplied and/or device manufactured under license for following Open Globe, Inc. United States Patent
6,304,523.
Gracenote is a registered trademarks of Gracenote. The Gracenote logo and logotype, and the “Powered by Gracenote” logo are trademarks of
Gracenote.
Program © 2001, 2002, 2003, 2004, 2005 Sony Corporation
Documentation © 2005 Sony Corporation
Model Name Using Similar Mechanism NEW
MD Mechanism Type MT-MZNH900-181J
Optical Pick-up Name ABX-UJ
SPECIFICATIONS
Audio playing system
MiniDisc digital audio system
Laser diode properties
Material: GaAlAs
Wavelength:
λ = 790 nm
Emission duration: continuous
Laser output: less than 44.6
µW
(This output is the value measured at a distance of 200 mm from the lens surface on the optical pick-up block with 7 mm aperture.)
– Continued on next page –
PORTABLE MD RECORDER
9-879-561-01
2005C05-1
© 2005.03
Sony Corporation
Personal Audio Group
Published by Sony Engineering Corporation
For other Service and User Manuals, go to www.ManualDepot.com
MZ-RH910
Recording and playback time
List of the recording time for each disc
When using a disc in Hi-MD mode
When recording on the recorder
Recording time 1)
Recording mode on the recorder
PCM
Hi-SP
Hi-LP
Codec/
Bit rate
Linear PCM/
1.4Mbps
ATRAC3plus/
256kbps
ATRAC3plus/
64kbps
1GB Hi-MD disc
80-minute standard disc
28 minutes
74-minute standard disc
26 minutes 1 hour and 34 minutes
7 hours and 55 minutes
2 hours and 20 minutes
2 hours and
10 minutes
34 hours 10 hours and
10 minutes
9 hours and
20 minutes
Recording time 1)2) When transferring from the computer
Codec/Bit rate 1GB Hi-MD disc
80-minute standard disc
74-minute standard disc
Linear PCM/1.4Mbps
ATRAC3plus/256kbps
1 hour and 34 minutes
28 minutes 26 minutes
7 hours and 55 minutes
2 hours and 20 minutes
2 hours and
10 minutes
ATRAC3plus/64kbps
ATRAC3plus/ 48 kbps
ATRAC3/132kbps
ATRAC3/105kbps
ATRAC3/66kbps
MP3/128kbps
34 hours
45 hours
16 hours and
30 minutes
20 hours and
40 minutes
32 hours and
40 minutes
17 hours
60-minute standard disc
21 minutes
1 hour and 40 minutes
7 hours and
40 minutes
60-minute standard disc
21 minutes
10 hours and
10 minutes
13 hours and
30 minutes
9 hours and
20 minutes
12 hours and
30 minutes
4 hours and 50 minutes
4 hours and
30 minutes
6 hours and 10 minutes
5 hours and
40 minutes
9 hours and 50 minutes
9 hours
5 hours 4 hours and
30 minutes
1 hour and 40 minutes
7 hours and
40 minutes
10 hours
3 hours and
40 minutes
4 hours and
40 minutes
7 hours and
20 minutes
3 hours and
30 minutes
1)
2)
Approximate time
When transferring 4-minute tracks
When using a disc in MD mode
You cannot record in MD mode on this recorder.
When transferring from the computer
Codec/Bit rate
ATRAC(stereo)/292kbps
ATRAC3/132, 105kbps
80-minute standard disc
80 minutes
ATRAC3/66kbps
2 hours and 40 minutes
5 hours and 20 minutes
Recording time 1)2)
74-minute standard disc
74 minutes
2 hours and 28 minutes
4 hours and 56 minutes
60-minute standard disc
60 minutes
2 hours
4 hours
1) Approximate time
2) When transferring 4-minute tracks
Revolutions
350 rpm to 3,000 rpm (CLV)
Error correction
Hi-MD:
LDC (Long Distance Code)/BIS (Burst
Indicator Subcode)
MD:
ACIRC (Advanced Cross Interleave Reed
Solomon Code)
Sampling frequency
44.1 kHz
Sampling rate converter
Optical (digital) input: 32 kHz/44.1 kHz/
48 kHz
Audio formats supported by this recorder
Recording:
Linear PCM (44.1 kHz/16 bit)
ATRAC3plus (Adaptive TRansform
Acoustic Coding 3 plus) (Hi-SP/Hi-LP)
Playback:
Linear PCM
ATRAC3plus
ATRAC3
ATRAC
MP3 (MPEG-1 Audio Layer-3/Sampling frequency 44.1 kHz/Bit rate 32 - 320 kbps
(constant/variable bit rate))
Modulation system
Hi-MD:
1-7RLL (Run Length Limited)/PRML
(Partial Response Maximum Likelihood)
MD:
EFM (Eight to Fourteen Modulation)
Frequency response
20 to 20,000 Hz
± 3 dB
Inputs 1)
MIC: stereo mini-jack
(minimum input level 0.13 mV)
Line in: stereo mini-jack for analog input
(minimum input level 49 mV) optical (digital) mini-jack for optical
(digital) input
1) The LINE IN (OPT) jack is used to connect either a digital (optical) cable or a line
(analog) cable.
Outputs i: stereo mini-jack (dedicated remote control jack)
2
Maximum output (DC)
Headphones:
2.8 mW + 2.8 mW (16
Ω) (European models)
5 mW + 5 mW (16
Ω) (Other models)
Power requirements
Sony AC Power Adaptor connected at the DC
IN 3V jack:
120 V AC, 60 Hz (Models for USA, Canada,
Mexico and Taiwan)
240 V AC, 50 Hz (Model for Australia)
220 V AC, 50 Hz (Models for China and
Argentine)
100 - 240 V AC, 50/60 Hz (Other models)
The recorder:
Nickel metal hydride rechargeable battery
NH-10WM 1.2V 900 mAh (MIN) Ni-MH
LR6 (size AA) alkaline battery
AC power adaptor DC 3V
Operating temperature
+5
°C (+41°F) to +35°C (+95°F)
Battery operation time 2)
2) Measured in accordance with JEITA.
Battery life
When recording continuously in Hi-MD mode
Disc type
1GB Hi-MD disc
60/74/80-minute standard disc
Batteries
NH-10WM 2)
LR6 3)
NH-10WM + LR6
NH-10WM
LR6
NH-10WM + LR6
4
8
Linear PCM
4
2
6.5
3.5
3
9
(Unit: approx.hours)(JEITA 1) )
Hi-SP Hi-LP
5.5
5.5
6.5
13
6.5
3.5
11
6.5
7.5
15
1) Measured in accordance with the JEITA (Japan Electronics and Information Technology Industries
2)
3)
Association) standard.
When using a 100% fully charged nickel metal hydride rechargeable battery
When using a Sony LR6 (size AA) alkaline dry battery (produced in Japan)
When playing continuously in Hi-MD mode
Disc type Batteries Hi-SP
(Unit: approx.hours)(JEITA)
Hi-LP MP3 1)
1GB Hi-MD disc
60/74/80-minute standard disc
NH-10WM
LR6
NH-10WM + LR6
NH-10WM
LR6
NH-10WM + LR6
1) Tracks transferred at 128 kbps
Linear
PCM
6.5
10.5
20
5.5
8.5
16.5
9.5
15.5
30
9
15
28.5
11
18
34.5
11
18
34.5
10
16.5
31.5
10
16.5
31.5
When playing continuously in MD mode
Disc type
60/74/80-minute standard disc
Batteries
NH-10WM
LR6
NH-10WM + LR6
SP
10
17.5
33
(Unit: approx.hours)(JEITA)
LP2 LP4
11
20
12
21
37 39.5
Dimensions
Approx. 80.2
× 20.7 × 84.3 mm (w/h/d)
(3 1 / 4
×
27 / 32
× 3
3 / 8 in.) (excluding projecting parts and controls)
Mass
Approx. 112 g (4.0 oz) (the recorder only)
Approx. 138 g (4.9 oz) (including the rechargeable battery)
Supplied accessories
AC power adaptor
Remote control (except US and Canadian models)
Earphones
Dedicated USB cable
NH-10WM Nickel metal hybride rechargeable battery
Battery carrying case
Dry battery case
Optical cable (except US and Canadian models)
Clamp filters (small-size)
CD-ROM (SonicStage/MD Simple Burner)*
Carrying poach
* Do not play a CD-ROM on an audio CD player.
Design and specifications are subject to change without notice.
MZ-RH910
On power sources
• For use in your house: Use the AC power adaptor supplied with this recorder. Do not use any other AC power adaptor since it may cause the recorder to malfunction.
Polarity of the plug
Notes on chip component replacement
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be damaged by heat.
Flexible Circuit Board Repairing
•
Keep the temperature of the soldering iron around 270 ˚C during repairing.
•
Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering or unsoldering.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
TABLE OF CONTENTS
1.
SERVICING NOTES
...............................................
4
2.
GENERAL
...................................................................
5
3.
DISASSEMBLY
3-1.
Disassembly Flow ...........................................................
6
3-2.
Case (Lower) Block .........................................................
6
3-3.
MAIN Board ....................................................................
7
3-4.
Panel (Upper) Section .....................................................
7
3-5.
Mechanism Deck (MT-MZNH900-181J) ........................
8
3-6.
Battery Case Block ..........................................................
8
3-7.
Gear (BSA), Gear (SB) ...................................................
9
3-8.
OP Service Assy ..............................................................
9
3-9.
DC Motor SSM18D/C-NP (Spindle) (M701),
DC Motor (Sled) (M702),
DC Motor Unit (Over Write Head Up/Down) (M703) ... 10
3-10. Holder Assy ..................................................................... 10
3-11. Position of Ferrite Core ................................................... 11
4.
TEST MODE
.............................................................. 12
5.
ELECTRICAL ADJUSTMENTS
.......................... 16
6.
DIAGRAMS
6-1.
Block Diagram – MD SERVO Section – ........................ 21
6-2.
Block Diagram – AUDIO Section – ................................ 22
6-3.
Block Diagram – POWER SUPPLY Section – ............... 23
6-4.
Schematic Diagram – MAIN Board (1/9) – .................... 25
6-5.
Schematic Diagram – MAIN Board (2/9) – .................... 26
6-6.
Schematic Diagram – MAIN Board (3/9) – .................... 27
6-7.
Schematic Diagram – MAIN Board (4/9) – .................... 28
6-8.
Schematic Diagram – MAIN Board (5/9) – .................... 29
6-9.
Schematic Diagram – MAIN Board (6/9) – .................... 30
6-10. Schematic Diagram – MAIN Board (7/9) – .................... 31
6-11. Schematic Diagram – MAIN Board (8/9) – .................... 32
6-12. Schematic Diagram – MAIN Board (9/9) – .................... 33
6-13. Printed Wiring Board
– MAIN Board (Component Side) – ............................... 34
6-14. Printed Wiring Board
– MAIN Board (Conductor Side) – ................................. 35
7.
EXPLODED VIEWS
7-1.
Case (Lower) Section ...................................................... 48
7-2.
Panel (Upper) Section ..................................................... 49
7-3.
Chassis Section ................................................................ 50
7-4.
Mechanism Deck Section (MT-MZNH900-181J) ........... 51
8.
ELECTRICAL PARTS LIST
................................ 52
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
3
MZ-RH910
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts.
The flexible board is easily damaged and should be handled with care.
OPERATION CHECK WHEN THE MAIN BOARD IS
REMOVED
In making an operation check with the MAIN board removed from the set, short the SL894 of the MAIN board with the solder before starting the operation check.
Note: Be sure to remove the solder used for shortcircuit after the repaire completed.
– MAIN BOARD (Conductor Side) –
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens.
SL894
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to about 350 °C.
Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.
NOTES ON REPLACEMENT OF CSP (CHIP SIZE
PACKAGE) IC
Replacement of MM1690NCBE (IC401), SN761059AZQLR
(IC501), SC901585VAR2 (IC601) and CXD2681-225GG (IC801) used in this set requires a special tool.
Providing the required system environment
System requirements
The following system environment is required in order to use the SonicStage Ver. 3.0/MD
Simple Burner Ver. 2.0 software for the MD Walkman.
Computer
Operating
System
Display
Others
IBM PC/AT or Compatible
• CPU: Pentium III 450 MHz or higher
• Hard disk drive space: 200 MB or more (1.5 GB or more is recommended) (The amount space will vary according to Windows version and the number of music files stored on the hard disk.)
• RAM: 128 MB or more
Others
• CD drive (capable of digital playback by WDM) (A CD-R/RW drive is necessary for CD writing)
• Sound Board
• USB port
Factory installed:
Windows XP Media Center Edition 2005/Windows XP Media Center
Edition 2004/Windows XP Media Center Edition/Windows XP
Professional/Windows XP Home Edition/Windows 2000 Professional/
Windows Millennium Edition/Windows 98 Second Edition
High Color (16bit) or higher, 800 u 600 dots or better (1024 u 768 dots or better is recommended)
• Internet access: for Web registration, EMD services and CDDB
• Windows Media Player (version 7.0 or higher) installed for playing
WMA files
This software is not supported by the following environments:
• OSs other than the indicated above
• Personally constructed PCs or operating systems
• An environment that is an upgrade of the original manufacturer-installed operating system
• Multi-boot environment
• Multi-monitor environment
• Macintosh
Notes
• We do not ensure trouble-free operation on all computers that satisfy the system requirements.
• The NTFS format of Windows XP/Windows 2000 Professional can be used only with the standard
(factory) settings.
• For Windows 2000 Professional users, install Service Pack 3 or later version before using the software.
• We do not ensure trouble-free operation of the system suspend, sleep, or hibernation function on all computers.
4
Looking at controls
The recorder
SECTION 2
GENERAL
The display window of the recorder
MZ-RH910
This section is extracted from instruction manual.
A MIC (PLUG IN POWER) jack
1)
B LINE IN (OPT) jack
C HOLD switch
Slide the switch in the direction of the arrow to disable the buttons on the recorder. To prevent the buttons from being accidentally operated when you carry the recorder, use this function.
D Display window
E OPEN switch
F Jog dial (N (play)/ENT)
G . (AMS, fast rewind), > (AMS, fast forward) button
H Battery compartment
I X (pause) button
J VOL (volume) +
1) , – button
K i (earphones) jack
L REC(+N)/T MARK button
M •SEARCH/ MENU button
2)
N x (stop) • CANCEL/CHG button
O DC IN 3V jack
P
USB cable connecting jack
Q The cover of the connecting jack
USB cable
R Terminals for attaching dry battery case
1) There are tactile dots beside the VOL + button
2) and the MIC (PLUG IN POWER) jack.
• indicates a function that requires a slight press of the button. indicates a function that requires pressing the button for 2 seconds or more.
A Operating condition indication display area
Displays the indications of each operating condition.
x: stop
N: play
X: pause m: fast rewind
M: fast forward
., >: AMS
B Selected operating condition display area
Displays the recording mode, play mode, or selected menu item, etc.
C SYNC (synchro-recording) indication
D REC indication
Lights up during recording or file transfer from the computer. When flashing, the recorder is in record standby mode.
E Hi-MD/MD indication
“Hi-MD” lights up when the disc used in Hi-MD mode is inserted in the recorder and “MD” lights up when the disc used in MD mode is inserted in the recorder.
F Battery indication
Shows the approximate remaining battery power. If the batteries are weak, the indication becomes empty and starts flashing.
G Track number display area
H Text information display area
Displays titles, menu items, error messages, etc. Titles are preceded by the following icons.
: track name
: artist name*
: album name*
: group name
: disc name
* Appears only for discs used in Hi-MD mode.
I Time display area
Displays the elapsed time, remaining time of the track or disc, etc.
The earphones with a remote control (except for the US and Canadian model)
A
B
C
D
E
F
G
A VOL (volume) +, – control
B HOLD switch
Slide the switch in the direction of the arrow to disable the buttons on the remote control. To prevent the buttons from being accidentally operated when you carry the recorder, use this function.
C Clip
D (group) +, – button
E NX (play, pause) button
F x (stop) button
G . (AMS, fast rewind), > (AMS, fast forward) button
5
MZ-RH910
•
This set can be disassembled in the order shown below.
SECTION 3
DISASSEMBLY
3-1. DISASSEMBLY FLOW
Note 1: The process described in can be performed in any order.
Note 2: Without completing the process described in , the next process can not be performed.
SET
3-2. CASE (LOWER) BLOCK
(Page 6)
3-3. MAIN BOARD
(Page 7)
3-4. PANEL (UPPER) BLOCK
(Page 7)
3-5. MECHANISM DECK (MT-MZNH900-181J)
(Page 8)
3-7. GEAR (BSA), GEAR (SB)
(Page 9)
3-8. OP SERVICE ASSY
(Page 9)
3-6. BATTERY CASE BLOCK
(Page 8)
3-9. DC MOTOR SSM18D/C-NP (SPINDLE) (M701),
DC MOTOR (SLED) (M702),
DC MOTOR UNIT (OVER WRITE HEAD UP/DOWN) (M703)
(Page 10)
Note: Follow the disassembly procedure in the numerical order given.
3-2. CASE (LOWER) BLOCK
3-10. HOLDER ASSY
(Page 10)
S895 knob (hold)
5 two screws (M1.4)
6
7 screw (M1.4)
6 Slide the knob (Open) in the direction of arrow.
8 case (lower) block
4 screw (M1.4)
3 screw (M1.4)
2 battery lid assy
1 Open the battery lid assy in the direction of arrow.
3-3. MAIN BOARD
3 flexible board
(CN471)
5
1 Remove two solders.
7 MAIN board
2 flexible board
(CN701)
1 Remove two solders.
6 flexible board
(CN501)
4 five toothed lock screws
3-4. PANEL (UPPER) SECTION
6 panel (upper) section
5 claw
MZ-RH910
1 flexible board
(CN471)
4 torsion spring (L)
B
– POSITION OF TORSION SPRING (L) – hook
A
2 Slide the open slider in the direction of arrow A and open the panel (upper) section in the direction of arrow B .
torsion spring (L) hook
3 two step screws
7
MZ-RH910
3-5. MECHANISM DECK (MT-MZNH900-181J)
1 two step screws (MD)
2 mechanism
(MT-MZNH900-181J)
3-6. BATTERY CASE BLOCK
3 two screws
2 MD standard pin
5 tension spring (lock)
6 open slider
1 claw
7 battery case block
4 screw (M1.4)
8
3-7. GEAR (BSA), GEAR (SB)
5 gear (SB)
1 self tap screw
2 thrust retainer spring
3 washer (0.8-2.5)
4 gear (BSA)
MZ-RH910
3-8. OP SERVICE ASSY
1 Lead screw block assy is turned and it removes from OP service assy.
2 OP service assy
9
MZ-RH910
3-9. DC MOTOR SSM18D/C-NP (SPINDLE) (M701), DC MOTOR (SLED) (M702),
DC MOTOR UNIT (OVER WRITE HEAD UP/DOWN) (M703)
2 Remove two solders of flexible board.
3 two screws (M1.4)
4 DC motor (sled)
(M702)
1 Remove four solders of flexible board.
8 self tap screw
9 DC motor unit
(over write head up/down)
(M703)
6 three self tap screws
7 DC motor SSM18D/C-NP
(spindle) (M701)
3-10. HOLDER ASSY
4 Remove the holder assy to the direction of the arrow A .
3 Open the holder assy.
5 motor base assy
2 boss
1 boss
A
10
MZ-RH910
3-11. POSITION OF FERRITE CORE
-AC ADAPTOR-
-USB CABLE-
USB A type
4cm
A cable is rolled twice.
clamp filter (ferrite core)
(Part No. 1-400-878-11)
4cm
A cable is rolled once.
1cm clamp filter (ferrite core)
(Part No. 1-400-878-11)
(except mexican, tourist models)
USB mini B type
11
MZ-RH910
SECTION 4
TEST MODE
OUTLINE
Operation in the test mode is performed with the set. A key having no particular description in the text, indicates a set key. Also, For the LCD display, the LCD on the remote commander is shown.
(The running system is displayed in set LCD instead of the disk mark)
Remote commander LCD display
888
F 1SHUFPGM SOUND 8
V-SUR
All lit
Remote commander LCD display
(all off)
(all lit)
(inner rotation, outer lit) off x
B
(inner lit, outer off)
(inner off, outer lit)
.
>
Set LCD display
003 V1.000
All off
Microcomputer version display
1. OPERATION IN SETTING THE TEST MODE
• When the test mode becomes active, first the Display Check mode is selected.
• Other mode can be selected from the Display Check mode.
• When the test mode is set, the LCD repeats the following display.
• When the x key is pressed and hold down, the display at that time is held so that display can be checked.
2. CONFIGURATION OF THE TEST MODE
Display check mode:
Set LCD display
003[80**]
Ver 1.000
BEr******
All lit
All off
Flow of the test mode:
Display Check Mode
003
V1.000
Version display → All lit
→ All off → Version display...
[VOL +] key
Manual Mode
000 Manual x key
[VOL --] key
Overall Adjustment Mode
000 AdjF** x key
[SEARCH/MENU] key
Key Check Mode
110 10
Open the lid
> key x key
Self-Diagnosis Result Display Mode
000 1 0000
N /ENT key
Sound Skip Check Result
Display Mode (Play)
000 P00r00 x key
[REC/T MARK] key x key
Sound Skip Check Result
Display Mode (REC)
000 p00R00
[SEARCH/MENU] key
(press a few seconds)
Key Count Mode
000 MENU 000
Remote commander
[DISPLAY] key
(press a few seconds)
(Not used in servicing)
Microcomputer version display
12
MZ-RH910
3. MANUAL MODE
This is mode to adjust or check the operation of the set by function.
Operation of The Manual Mode
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to activate the Manual mode where the
LCD displays as shown below.
Display of the remote commander
000 Manual
Number of 1000th place
(000 to 009)
3. During Manual mode, the optical pick-up moves outward or inward while the > or .
key is pressed for several seconds respectively.
4. Each test item is assigned with a four-digit item number; 1000th place is a top item, 100th place is a major item, 10th place is a medium item, and unit place is a minor item.
Flow of manual mode operation:
Top item switching
> key x key
[VOL +] key: 1000th place of item number increase.
[VOL --] key: 1000th place of item number decrease.
Major item switching
> key x key
Minor item switching
[VOL +] key: 100th place of item number increase.
[VOL --] key: 100th place of item number decrease.
Medium item switching
> key x key
[VOL +] key: 10th place of item number increase.
[VOL --] key: 10th place of item number decrease.
> key: 1st place of item number increase.
. key: 1st place of item number decrease.
Adjusted value variation
[VOL +] key: Increases the adjusted value.
[VOL --] key: Decreases the adjusted value.
Adjusted value write
Set [ ] key:
Remote commander [ --] key:
Adjusted value is written.
5. The display changes a shown below each time the
[SEARCH/MENU] key is pressed.
• Item Title Display
Remote commander LCD display
XXX * * * * * * # # item number item title
• Address & Adjusted Value Display
Remote commander LCD display adjusted value
XXX * * * S # # item number address adjusted value
• Jitter Value & Adjusted Value Display
Remote commander LCD display
XXX * * * J # # item number adjusted value jitter value
• Block/Bite Error Value & Adjusted Value Display
Remote commander LCD display
XXX * * * B # # item number adjusted value block/bite error value
• Bite Error LPF Value & Adjusted Value Display *1)
Remote commander LCD display
XXX * * * L # # item number adjusted value bite error LPF value
• CEMAX Value & Adjusted Value Display *1)
Remote commander LCD display
XXX
* * * C # # item number adjusted value
CEMAX value
• ADIP Error Value & Adjusted Value Display
Remote commander LCD display
XXX
* * * A # # item number adjusted value
ADIP error value
• Focus Drive Value & Adjusted Value Display
Remote commander LCD display
XXX * * * F # # item number adjusted value focus drive voltage value
*1) It is skipped from the item number 5000 less than 8000.
6. To release the Manual mode, press the x key to return to the
Display Check mode.
13
MZ-RH910
4. OVERALL ADJUSTMENT MODE
4-1. Operation of The Overall Adjustment Mode
1. Enter the test mode (Display Check mode).
2. Press the [VOL--] key to activate the Overall Adjustment mode where the LCD displays as shown below.
Display of the remote commander
000 AdjF**
Disc mark:
Lit the inner segments: Completed the power supply adjustment.
Lit the outer segments: Completed the check of charge function.
“ ** ”:
If “DF” or “FF” is displayed, it mean that completed the servo overall adjustment.
3. To release the Overall Adjustment mode, press the x key and return to the Display Check mode.
Flow of overall adjustment mode:
Overall Adjustment Mode
000
AdjF**
.
key
CD Overall Adjustment Mode
*** CD Run x key
> key
MD1 Overall Adjustment Mode
*** MD1Run x key
[VOL +] key
Hi-MD3 Overall Adjustment Mode
*** HM3Run x key
[VOL --] key
Stray Light Offset Overall
Adjustment Mode
*** OfsRun x key
[SEARCH/MENU] key
Optical Pick-up Operation
Check Mode
000
OPChk x key
[REC/T MARK] key
Initialize The Adjustment Values
911 ResOK?
x key rotation
4-2. Error Message in The Overall Adjustment Mode
In the Overall Adjustment mode, if an error occurred, it displays as following table.
Display
Close!
DfDis!
Dose not close the lid
Description
Unsuitableness disc was inserted
NoChg!
Does not finish the check of charge function yet
NotCD!
Does not complete the CD Overall adjustment before the
MD1 Overall adjustment
NotM1!
Does not complete the MD1 Overall adjustment before the
Hi-MD3 Overall adjustment
NotH3!
Does not complete the Hi-MD3 Overall adjustment before the Stray Light Offset Overall adjustment
**** NG Error of item number “****”
5. SELF-DIAGNOSIS RESULT DISPLAY MODE
This set uses the self-diagnostic function system in which if an error occurred during the recording or playing, the mechanism control block and the power supply control block in the microcomputer detect it and record its cause as history in the nonvolatile memory.
By checking this history in the test mode, you can analyze a fault and determine its location.
Total recording time is recorded as a guideline of how long the optical pick-up has been used, and by comparing it with the total recording time at the time when an error occurred in the selfdiagnosis result display mode, you can determine when the error occurred.
Clear the total recording time, if the optical pick-up was replaced.
5-1. Operation of The Self-Diagnosis Result Display
Mode
1. Enter the test mode (Display Check mode).
2. Press the > key to activate the Self-Diagnosis Result Display mode where the LCD displays as shown below.
Display of the remote commander
*** $$ ####
“ *** ” : Error display code
“ $$ ” : Error rivision history code
“ #### ” : Addition information when error occurs
3. To release the Self-Diagnosis Result Display mode, press the x key and return to the Display Check mode.
14
MZ-RH910
Flow of Self-diagnosis Result Display mode operation:
*** 1 ####
[VOL +] key [VOL --] key
*** N ####
[VOL +] key [VOL --] key
*** N1####
[VOL +] key [VOL --] key
*** N2####
[VOL +] key [VOL --] key
*** R_####
[VOL +] key [VOL --] key
The first error
The last error
One error before the last
Two error before the last
Total recording time
5-2. Error Code of The Self-Diagnosis Result Display
Mode
Error display code
000 No error
001
002
Description
Attempt to access an abnormal address
High temperature detected
003
004
005
006
Focus error (no change)
Abnormal rotation of disc
Fault of disc discriminate
Error of access loop (no change)
013
032
033
034
007
008
009
012
Error of access loop (with change)
Could not read address
Focus error (with change)
Could not read data with SYNC
TOC address data error
Focus error, ABCD offset error
Tracking error, offset error
X1 tracking error, Tracking error, offset error
Error display code
000 0000
Addition information when error occurs
001
002 to 034
Illegal cluster specified when error occurs
Total recording time when erroe occurs
5-3. Clear The Total Recording Time
After replacing the optical pick-up, clear the total recording time.
1. Enter the test mode (Display Check mode).
2. Press the > key to activate the Self-Diagnosis Result Display mode.
3. Press the [VOL--] key once to display the total recording time indication.
4. Press the X key on the set or – key on the remote commander and display “ClrOK?”.
5. Press the X key on the set or – key on the remote commander again to display “RecT 0” and clear the total recording time.
6. KEY CHECK MODE
This mode is used for key check.
Operation of The Key Check Mode
1. Enter the test mode (Display Check mode).
2. Press the [SEARCH/MENU] key to activate the Key Check mode where the LCD displays as shown below.
Display of the remote commander
110 $$$$$$ ##
“$$$$$$” : Pressed key name.
When remote commander key is pressed, display becomes as “r$$$$$”.
“##”
When the jog dial is turned, it displays “JOG+ X” or “JOG-
X ” (“X” is number of 1 to 3). If the jog dial is turned four click, it displays “JOG+OK” or “JOG-OK”.
: Key voltage of remote commander. (Hexadecimal number)
3. When all keys check is OK on the main unit, it displays as follows.
Display of the remote commander
888 SET OK ##
When all keys check is OK on the remote commander, it displays as follows.
Display of the remote commander
888
RMC OK ##
4. When all keys check are OK both the main unit and the remote commander, it display backs to the Display Check mode automatically.
5. To release the Key Check mode, open the lid and return to the
Display check mode.
15
MZ-RH910
Adjustment order:
1. Entering the test mode
Note: Enter the test mode with a key.
2. Initialize the adjustment value
3. Power supply voltage adjustment
4. Charge function check
5. Laser power check
6. Setting the adjustment values
7. Servo Overall adjustment
8. Resume clear
9. Releasing the test mode
SECTION 5
ELECTRICAL ADJUSTMENTS
1. PRECAUTIONS FOR ADJUSTMENT
1. Adjustment must be done in the test mode only. After adjusting, release the test mode. A key having no particular description in the text, indicates a set key. Also, for the LCD display, the
LCD on the remote commander is shown.
2. Use the following tools and measuring instruments.
•
Digital multi meter
•
Regulated dc power supply (two sets)
•
Ampere meter
•
Laser power meter
•
CD adjustment disc TDYS-1 (Part No. : 4-963-646-01)
•
MD1/HiMD1 hybrid adjustment disc MDW-74/GA2
•
Hi-MD3 adjustment disc HMD1GSDJ
(Part No. : 8-892-388-38) *1
•
Remote commander in accessories (with LCD)
•
AC adapter in accessories
*1) Hi-MD3 adjustment disc (HMD1GSDJ) is consumable.
Therefore if it is used 400 times, exchange it for a new.
2. ADJUSTMENT SEQUENCE
Adjustment must be done with the following order.
4. Press the > key once, press the [VOL+] key once, and press the > key once again to display as follows.
Display of the remote commander
210 PwrAdj
5. Repeat the next procedures (3-2-2. PwrAdj Adjustments), and adjust all contents of “table 3-2-1. PwrAdj Specifications”.
3-2-2. PwrAdj adjustments
Repeat the following procedures and adjust all contents of “table 3-
2-1. PwrAdj Specifications”.
Example Display (Item No. 2211)
211 VC1 ** adjustment value (hexadecimal)
Procedure:
1. Connect the digital multi meter to measuring point (refer to the following table) and CL433 (GND).
2. Press the > key to change the item numberr to 2211.
3. Adjust with [VOL+]/[VOL--] keys so that the value of digital multi meter becomes specification value.
4. Press the X key on the set or – key on the remote commander to write the adjusted value. (Shifts to the next item automatically)
5. Repeat adjustment from step 3 until item number 2233.
3. ADJUSTMENT OF THE EACH ITEM
3-1. Initialize The Adjustment Value
Procedure:
1. In the test mode (Display Check mode), press the [VOL--] key to enter the Overall adjustment mode.
2. Press the [REC/T MARK] key and display “911 ResOK?”.
3. Press the X key on the set or – key on the remote commander to display “911 Reset!” and initialize the adjustment values.
4. Press the x key and back to Display Check mode.
3-2. Power Supply Voltage Adjustment
Adjustment must be done with the following order.
3-2-1. Setting
Procedure:
1. Apply the voltage of 1.2 V to the battery terminals, and enter the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Press the [VOL+] key twice to display as follows.
Display of the remote commander
002 POWER
ItemNo.
Display Specification value Measuring point
2211 211 VC1 **
2212 212 VC1 Ni **
2213 213 VC2 **
2214 214 DDC3 L **
2215 215 DDC3 H **
2216 216 REG1 L **
2217 217 REG1 H **
2218 218 REG2 1 **
2219 219 REG2 2 **
2221 221 REG2 3 **
2222 222 REG2 4 **
2223 223 REG3 **
2224 224 VREC 1 **
2225 225 VREC 2 **
2226 226 VREC 3 **
2227 227 VREC 4 **
2228 228 VREC 5 **
2229 229 VREC 6 **
2231 231 VREC 7 **
2232 232 VREC 8 **
2233 233 VREC 9 **
2.05V + 0.02V
2.25V
±
0.01V
1.20V + 0.01V
3.10V
±
0.015V
3.10V
±
0.015V
3.02V
±
0.02V
3.02V
±
0.02V
2.275V
±
0.01V
2.480V
±
0.01V
2.740V
±
0.01V
2.985V
±
0.01V
2.52V
±
0.02V
0.89V
±
0.02V
1.08V
±
0.02V
1.52V
±
0.02V
2.27V
±
0.02V
2.97V
±
0.02V
0.94V
±
0.02V
1.28V
±
0.02V
2.57V
±
0.02V
2.57V
±
0.02V
Note1: “**” is adjustment value (hexadecimal number).
Note2: Ground point of all measuring points is CL433.
Note3: Refer to page 17 for adjustment location.
Table 3-2-1. PwrAdj Specifications
CL518
CL518
CL518
CL511
CL604
CL604
CL604
CL515
CL8029
CL8029
CL8001
CL658
CL658
CL362
CL362
CL518
CL515
CL604
CL604
CL604
CL604
16
MZ-RH910
3-2-3. VBsAdj adjustments
Procedure:
1. In the “3-2-2. PwrAdj Adjustments” completed status, display as follows.
Display of the remote commander
240 VBsAdj
2. Apply the voltage of 5 V to the CL453 and CL460 (GND).
3. Press the > key to change the item number to 2241.
4. Adjust with [VOL+]/[VOL--] keys so that the value of digital multi meter becomes specification value. (Refer to “table 3-
2-2. VBsAdj Specifications”)
5. Press the X key on the set or – key on the remote commander to write the adjusted value.
6. Repeat adjustments to item number 2243 at the same manner as step 4 to step 5.
7. Select the item number 2244, and turn off the power supply of battery terminal.
8. Repeat adjustments to item number 2244 and 2245 at the same manner as step 3 to step 5.
9. Apply the voltage of 1.2 V to the battery terminal again.
10. Turn off the voltage of 5 V to the CL453 and CL460 (GND).
11. Press the x key three times and back to the Display Check mode.
ItemNo.
Display
2241 241 REG4 **
2242 242 REG5 **
2243 243 REG6 **
Specification value Measuring point
1.13 V
±
0.01 V CL8001
2.05 V + 0.02 V
3.30 V
±
0.01 V
CL8029
CL8055
2244 244 DDC5 L ** 2.00 V + 0.02 V CL935
2245 245 DDC5 H ** 1.95 V
±
0.01 V
Note1: “**” is adjustment value (hexadecimal number).
Note2: Ground point of all adjustment points is CL433.
Table 3-2-2. VBsAdj Specifications
CL935
Adjustment Location:
– MAIN BOARD (Component Side) –
S892
(HALF LOCK)
CL362
CL8029
SL892
S895
R8892
C8893
CL8001 CL518 CL511 CL515
NICKEL METAL HYBRID
RECHARGEABLE BATTERY
NH-14WM
1PC. 1.2V 1400mAh
FB3301
C3308
C3309
R307
D3305
1
Q351
8
4
C3306
FB3302
C206
C204
2C
R357
1C
Q353
2B E 1B
Q251
Q151
5
C3372
R251
FB3351
1
FB2202
R256
R255
D471
R206
Q352
FB2201
C362 +
+
C254
+
C154
R489
R107
CN471
FB1101
F351
+
R106
16
1
R101
C101
C108
C107
C4485
18
+
C367
R201
C102
C207
IC351
R843
SL802
1C
15
21
+
9
8
C364
Q471
+
1B E 2B
2C
14
22
C314
R957
R836
C805
C803
R827
VDR8861
C479
1
3
IC302
R309
IC301
+
8
28
C318
R811
R812
7
1
J402
–
DC IN 3V
+
5
4
C328
+
D4436
D457
A
D4435
K
C4425
R314
+
+
L303
W404
FB802
+
10
FB808
FB8810
C819
L802
CN701
L806
1
C821
X801
SL891
R808
FB807
C801
117
58
114 109
28
102
236
110
119
33
30
31
156
168
63
202
254
162 165
208
211
212
204
173 253
257
233
106
100
41
15
159
201
255
235
20
80
261
234
103
238
13
313
275
273
105
39
237
52
104 115
27 140 139 276 274 44 113 14 37 146 149 138
118 111 239 54 277 40 108 107 283 281 147
112 32
148
297
137
285
116
42
43
98
34
99
101 141
158 160
213
142
200
256
203
258
259
232
19
18
260
214
215
161
12 11
96 94
95
97
10
92
93
9
91
90
88
89
45 145 143 144 46
167 295
29
172
17
163
210 154
164 155
209 171 170 166 157
169
60
16
153
7
86
8
85
84
87
287
307
308
296
292
305
191
228
231
185
83
50
311 312
310 6
151 150
47 49
280
38
278
282 77
48
289
306
309
174
303
301
195
59
224
2
290
226
284
279
78
5
57
288
286
53
299
302
293
4
304
199
197
225
227
207
194
229
190
189
192 183
135
294
186
1
79
242
180
217
61
176
182
222
220 246
64
223 248
249
262
263
265 268
266 269
240 243
178 244
230
187
193
3
219 241 221 247 270 152 69 67 25 70 65
24 175 245 250 267 264 72 71 26 66 51
271
272
179
251
216
252
218
177 181
62
23
IC801
76
∗
73 131
68
188
75 74 198
320 316
205 319 318
184
136
196
134
317
314
315
21
298
36
121
123
126
124
206
22
130
55
129
132
120
35
300
56
291
82
81
133
128
127
125
122
R807
R806
R804
R6623
D6616
X802
C835
R8813
FB8803
SL801
SL894
D803
C850
C6680
R813
R878
C828
R857
R6622
1G S 2G
S894
BATTERY
INSERT DETECT
C518 +
L502
R526
L503
W403
C520
R525 C524
C550
C554
C556 + C530 + C553
C4462
L504
C836
C8864
C616
+
L803
C557
FB5503
C521
C552
5451 48 45 43 42 40 37 34 31
5552 49 47 44 41 38 36 33 30
5653 50 46
1 4 7 11
39 35 32 29
18 22 25 28
2 5 8 10 13 16 19 21 24 27
3 6 9 12 14 15 17 20 23 26
C838 +
L804 R501
R502
C526
R524
R520
R518
R519
C555
C565
E C B
Q504
C643
C607
IC605
4
R628
C666
5
R664
R6695
L608
1 3
R653 C602
D614
D601
C675
D613
C636
R678
R693
85
86
88
90
93
97
101
105
84
87
89
91
94
98
102
106
82
83
108 109
110 111
112
1
3
2
5
4
80
81
7
6
77
78
10
9
73
74
14
13
69
70
18
17
65
66
92
95
79
96
75
76
99
103
107
100
104
12 16
8 11 15
71
72
67
68
64
51
20
19
48
44
40
47
43
39
23 36
22
21
62
63
60
61
58
59
57
56
55
53
54
52
25
24
27
26
50
46
42
38
35
33
31
28
49
45
41
37
34
32
30
29
R6694
R690
R651
R649
R648
R675
R616
C641
C642
R617
R629
C645
C672
K
D602
A
C633 C638 R689
+ C637
C533
C567
+
C627 +
C628
L601
+ C635
L906
L603
+
C411
C409
+
L907
L901
L506
+ C909
K A
D443
R505
C552
C545
R686
Q407
R436
6 12 16 20 26 32
5 11 15
4 10
3 9
19 25 31
24 30
23 29
2 8 14
1 7 13
18 22 28
17 21 27
R437
R422
1C 2B 2E
Q441
1E 1B 2C
G D D
R433
R432
C560
L505
C558
R515
R516
E C B
Q503
R513
R514
E C B
Q502
1C 2B 2E
Q406
1E 1B 2C
R443
Q442
S D D
D444 A K
4
5
C424 +
Q433
D440
C4465
Q432
1
8
S
D
D
Q403
G
D
D
D6615
C622
+
+ C426
Q601
D4456
R4460
FB4452
C4455
C4467
C4466
FB4451
C4456
D4442
C4428
W402
1D 2D
C623
CL604
K A
+
K
D606
A
D608
C6649
2S
2G
1D
R625
K A
Q602
1S
R6621
2D
1G
R6620
C6676
L605
D605
D607
DRY BATTERY
SIZE “AA”
(IEC DESIGNATION R6)
1PC. 1.5V
(CHASSIS)
C4429
+ C922
C653
D4443
+
+ C402
+
C403
W401
C406
C4463
K
CL433
(GND)
8
1
A
D401
Q401
5
4
C4464
(BATTERY CASE)
CL460
(GND)
CL453 CL8055 CL604
CL433
(GND)
11
(11)
CL935
CL658
17
MZ-RH910
3-3. Charge Function Check
Note1: When perform this check, don’t apply a voltage to battery terminals.
Note2: Be sure to disconnect the AC adapter when connecting the resistors.
Doing so with the power supply connected causes a trouble.
3-3-1. Voltage adjustment and checks
Procedure:
1. Connect the digital multi meter to battery terminals.
2. Connect the AC adapter to the set.
3. Enter the test mode (Display Check mode).
4. Press the [VOL+] key to enter the Manual mode.
5. Press the [VOL+] key twice, press the > key once, press the
[VOL+] key once, press the > key once, press the [VOL+] key three times to display as follows.
Display of the remote commander
260 ChrgNi
6. Press the > key to select the item number 2261 and display as follows.
Display of the remote commander
261 ChgAdj ** adjustment value (hexadecimal)
7. Adjust with [VOL+]/[VOL--] keys so that the value of digital multi meter becomes 1.80 ± 0.01V.
8. Press the X key on the set or – key on the remote commander to write the adjusted value.
9. Press the > key to select the item number 2262.
10. Confirm that the value of digital multi meter is 1.20 ± 0.024V.
11. Press the > key to select the item number 2263.
12. Confirm that the value of digital multi meter is 2.17
± 0.05V.
13. Press the x key four times and back to the Display Check mode.
3-3-2. Ampere checks
Procedure:
1. Connect the 22 ohms resistor (more than 0.1 watts) and ampere meter to battery terminals.
2. Connect the AC adapter to the set.
3. Enter the test mode (Display Check mode).
4. Press the [VOL+] key to enter the Manual mode.
5. Press the [VOL+] key twice, press the > key once, press the
[VOL+] key once, press the > key once, press the [VOL+] key three times, press the > key four times to select the item number 2264.
6. Confirm that the value of ampere meter becomes specification value. (Refer to “table 3-3-1. Ampere Specifications”)
7. Press the x key four times and back to the Display Check mode.
8. Cut the power supply and remove the resistor that connected to the battery terminals.
9. Repeat checks to item number 2267 at the same manner as step 1 to step 8. ( Refer to “table 3-3-1. Ampere Specifications” for the kind of the resistor that connected to the battery terminals at step 1)
ItemNo.
Display Specification value Connected Resistor
2264 20mA I ** 20 mA
± 11 mA
22
Ω (more than 0.1W)
2265 140mAI ** 140 mA
± 14 mA
10
Ω (more than 1.0W)
2266 170mAI ** 170 mA
± 15 mA
10
Ω (more than 1.0W)
2267 500mAI ** 500 mA
± 32 mA
2.2
Ω (more than 1.5W)
Table 3-3-1. Ampere Specifications
3-4. Laser Power Check
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Open the lid and press the .
key continuously until the optical pick-up moves to the most inward track.
4. Press the [VOL--] key once to display as follows.
Display of the remote commander
009 DESIGN
5. Press the > key three times to select the item number 9111 and display as follows.
Display of the remote commander
111
LrefPw **
6. Set the laser power meter so that the laser beam from the optical pick-up aims at the objective lens of laser power meter at right angle. (Confirm it with the disc not inserted)
7. Confirm that the value of laser power meter is 0.860 mW
±
19.2%.
8. Press the > key to select the item number 9112.
9. Confirm that the value of laser power meter is 0.763 mW ±
18.2%.
10. Press the > key to select the item number 9113.
11. Confirm that the value of laser power meter is 6.87 mW
±
12%.
12. Press the x key four times and back to the Display Check mode.
3-5. Setting The Adjustment Values
3-5-1. Hi-MD3 setting
Preparation:
1. Perform calculation every item based on the data given by the
Hi-MD3 adjustment disc by referring to the following table.
(Round off the value in decimal place)
2. Convert the calculated value into hexadecimal number.
Note: The Hi-MD3 adjustment parameters vary depending on the disc, and therefore use the parameters of the disc used when performing the adjustment.
Item No.
0211
(*1)
0212
0213
(*2)
0214
0215
0216
Calculating formula ( * 3)
Pr_nominal / 0.05
Por / 0.05
Kr
× (−100)
Pw_nominal / 0.05
Ppw / 0.05
Kw
× (−100)
Prmin / 0.05
Pwmin / 0.05
*1) If the “Pr_nominal” value is indicated, use the “Pr_nominal” value and not used “Por” value.
*2) If the “Pw_nominal” value is indicated, use the “Pw_nominal” value and not used “Ppw” value.
*3) Round off after the decimal point.
Table 3-5-1. Hi-MD3 adjustment parameter
18
MZ-RH910
Example of Calculation:
Item No.
Parameter
0211 Pr_nominal 2.48 mW
0212 Kr
−
0.3 %/
°
C
0213 Pw_nominal 7.35 mW
0214 Kw
−
0.4 %/
°
C
0215 Prmin 1.9 mW
0216 Pwmin 5.8 mW
Decimal
50
30
147
40
38
116
Result
Hexadecimal
32h
1Eh
93h
28h
26h
74h
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Press the > key once, press the [VOL+] key once, and press the > key once again to display as follows.
Display of the remote commander
210 DiscPr
4. Press the > key once to select the item number 0211.
5. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of LCD becomes calculated value.
6. Press the X key on the set or – key on the remote commander to write the adjusted value.
7. Press the > key to next item.
8. Repeat adjustment from step 4 until item number 0216.
3-5-2. Destination setting
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Press the > key five time to select the item number 0113 and display as follows.
Display of the remote commander
113 DistFL ** adjustment value (hexadecimal)
4. Press the [VOL+]/[VOL--] key and set the according value to each destination referring to the following table.
5. Press the X key on the set or – key on the remote commander to write the adjusted value.
6. Press the > key to select the item number 0114.
7. Repeat adjustment from step 3.
8. Press the x key four times and back to the Display Check mode.
Destination
Setting value
Item No. 0113 Item No. 0114
US, Canadian, E, Mexican,
Hong Kong, Korean, Australian and
Tourist
AEP, UK and East European
20
A0
Table 3-5-2. Destination Setting
80
80
3-5-3. Other setting
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Press the [VOL+] key once and press the > key five time to select the item number 1113 and display as follows.
Display of the remote commander
113 SS **$$## adjustment value (hexadecimal)
4. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of “**” on the LCD becomes “1A”.
5. Press the X key on the set or – key on the remote commander to write the adjusted value. ($$ blinks and disc mark rotates on the LCD)
6. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of “$$”on the LCD becomes “20”.
7. Press the X key on the set or – key on the remote commander to write the adjusted value. (## blinks and disc mark rotates on the LCD)
8. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of “##”on the LCD becomes “94”.
9. Press the X key on the set or – key on the remote commander to write the adjusted value.
10. Press the [VOL+] key once to change the adjustment value of
“**” on the LCD into “1B”.
11. Press the X key on the set or – key on the remote commander to write the adjusted value. ($$ blinks and disc mark rotates on the LCD)
12. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of “$$”on the LCD becomes “F1”.
13. Press the X key on the set or – key on the remote commander to write the adjusted value. (## blinks and disc mark rotates on the LCD)
14. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of “##”on the LCD becomes “1A”.
15. Press the X key on the set or – key on the remote commander to write the adjusted value.
16. Press the x key four times and back to the Display Check mode.
19
MZ-RH910
3-6. Servo Overall Adjustment
Note1: Be sure to adjustment so that the set is horizontal and the LCD is upside. Unless performed in that state, it is not adjusted correctly.
Note2: If NG is displayed in the middle of this adjustments, perform “3-2.
Initialize The Adjustment Value” and “3-5. Setting The Adjustment
Values” again, then retry this adjustments from step 1.
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL--] key to enter the Overall Adjustment mode.
3. Insert the CD adjustment disc (TDYS-1).
4. Put the main unit horizontal so that the LCD becomes upside, and press the .
key.
5. Wait until “CD OK” is displayed on the LCD.
6. Insert the MD1/HiMD1 hybrid adjustment disc
(MDW-74/GA2).
7. Put the main unit horizontal so that the LCD becomes upside, and press the > key.
8. Wait until “MD1 OK” is displayed on the LCD.
9. Insert the Hi-MD3 adjustment disc (HMD1GSDJ).
10. Put the main unit horizontal so that the LCD becomes upside, and press the [VOL+] key.
11. Wait until “HMD3OK” is displayed on the LCD.
12. Eject the disc and close the lid.
13. Put the main unit horizontal so that the LCD becomes upside, and press the [VOL--] key.
14. Wait until “OfstOK” is displayed on the LCD.
15. Press the x key and back to the Display Check mode.
3-7. Resume Clear
Procedure:
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to enter the Manual mode.
3. Press the [VOL+] key once, press the > key once, press the
[VOL--] key once, press the > key once, and press the [VOL+] key twice, press the > key three times to select the item number 1933.
4. Press the X key on the set or – key on the remote commander to resume clear.
5. Press the x key four times and back to the Display Check mode.
3-8. Releasing The Test Mode
Note: When the power supply is switched on in the state where all electrical adjustments have not finished, it is displayed on LCD as
“Error EE’’ and the usual operation can’t be performed. When a power supply is accidentally turn off in the middle of electrical adjustments, it is again set as test mode and electrical adjustments is mode to complete.
20
SECTION 6
DIAGRAMS
6-1. BLOCK DIAGRAM – MD SERVO Section –
VREF
IY
IX
JX
JY
A
B
C
D
F
IIN
OPTICAL
PICK-UP
BLOCK
(ABX-UJ)
S0
S1
PLSE_XDC
CONT
TRK+
TRK–
FCS+
FCS–
MDVCC
PVCC
VCC
MDVCC
REG2 B+
REG3 B+
TRK+
TRK–
FCS+
FCS–
RF AMP, FOCUS/TRACKING ERROR AMP
IC501
HR601
OVER
WRITE
HEAD
RF BUFFER
Q504
M702
(SLED)
W
OVER WRITE
HEAD DRIVE
Q601, 602
M703
OVER WRITE
HEAD
UP/DOWN
OVER WRITE HEAD DRIVE
IC601 (1/2)
TRK+
TRK–
FCS+
FCS–
FOCUS/TRACKING
COIL DRIVE,
SPINDLE/SLED
MOTOR DRIVE
IC701
U
V
• SIGNAL PATH
: PLAYBACK
: REC
M701
(SPINDLE)
W
U
V
47 46 45 52 53 54
SLD MON U
SLD MON V
SLD MON W
CLV MON U
CLV MON V
CLV MON W
CLK
MZ-RH910
MZ-RH910
21 21
MZ-RH910
6-2. BLOCK DIAGRAM – AUDIO Section –
J301
LINE IN
(OPT)
J302
MIC
(PLUG IN POWER)
B+ SWITCH
Q301
VC01 B+
A/D CONVERTER, MIC AMP
IC301
REG1 B+
XRST
WAKE UP SWITCH
Q803
SWITCHING DRIVER,
HEADPHONE AMP
IC351
MUTING
Q351
MUTING
Q151, 251
MUTING
CONTROL
Q352
MUTING
CONTROL
Q353
VCO1
B+
VG
B+
RVDD
F351
J351 i
RVDD
DTCK
KEY_R
RGND
128 133 213 214 215 236 124 125 248 249 183 192
3
2
DATA+
DATA–
CN451 (1/2)
(USB)
1
VBUS
VBUS
X801
48MHz
X802
22.5792MHz
MUTEON
• SIGNAL PATH
: PLAYBACK
: OPTICAL IN
: LINE IN
: USB input from PC
: USB output to PC
: MIC IN
RMC KEY
EEPROM
IC891
SDO0, SCK0
DDC3 B+
RESET
SWITCH
Q471
DDC3 B+
VB B+
XRST2
SWITCH UNIT
(INCLUDING LCD101)
S892
HALF
LOCK
S893
OPEN/CLOSE
DETECT
S890
PROTECT
DETECT
S891
Hi-MD
PROTECT
DETECT
S895
HOLD
OFF
HOLD
XWK1, XWK2,
XWK4
MZ-RH910
22 22
MZ-RH910
6-3. BLOCK DIAGRAM – POWER SUPPLY Section –
B+ SWITCH
Q616, 617
RESET
SWITCH
Q618
REG4 B+
REG5 B+
OR GATE
IC605
VREC B+
RVDD
B+ SWITCH
Q904, 905
B+ SWITCH
Q502, 503
MDVCC
SDO0
SCK0
VSTB
B+
VCO2
B+
VC01
B+
VG
B+
VC
B+
REG1 B+
REG2 B+
REG3 B+
DDC3 B+
B+ SWITCH
Q901
REG5 VSTB B+
REG5 TSBV B+
TH801
REG F B+
REG5 OSC B+
USB IF VDD
B+ SWITCH
Q801, 802
VB B+
VBUS B+
DC IN B+
RVDD
DDC3 B+
B+ SWITCH
Q609
B+ SWITCH
Q603
VOLTAGE
LIMITER
Q451, 452
XWK4
XWK2
WAKE UP SWITCH
Q906
XWK1
CLK
XWK1, XWK2,
XWK4
REC KEY
MUTEON
FCRAM_VDD
FFCLR
B+ SWITCH
Q885, 886
REG5 B+
D884
D885
DRAM_
HOLD_DET
VOLTAGE
DETECT
Q884
DRAM_
VDD_CLR
DRAM_ALONE
REGULATOR
CONTROL
Q883
D883
D882
REGULATOR
CONTROL
Q881
VBUS
VB B+
B+ SWITCH
Q611
THP401
B+ SWITCH
Q608 VB B+
SWITCHING
Q612
D444
USB CHARGE
ON/OFF CONTROL
Q441, 442
CHARGE ON/OFF
CONTROL
Q407
S894
(BATTERY INSERT DETECT)
D443
DC IN B+
DC IN DETECT
Q433
REGULATOR
Q401
D401
NICKEL METAL HYBRID
RECHARGEABLE
BATTERY
(NH-10WM)
1PC. 1.2V 900mAh
CHARGE
CONTROL
Q432
GROUND LINE
SWITCHING
Q403, 406
J402
–
DC IN 3V
+
CN451 (2/2)
(USB)
DRY BATTERY
SIZE "AA"
(IEC DESIGNATION R6)
1PC. 1.5V
(BATTERY CASE)
MZ-RH910
23 23
MZ-RH910
•
Note For Printed Wiring Boards and Schematic Diagrams
Note on Printed Wiring Board:
• X
: parts extracted from the component side.
• Y
: parts extracted from the conductor side.
• f : internal component.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Pattern face side: Parts on the pattern face side seen from
(Conductor Side) the pattern face are indicated.
Parts face side: Parts on the parts face side seen from
(Component Side) the parts face are indicated.
* Replacement of IC401, IC501, IC601 and IC801 used in this set requires a special tool.
•
MAIN board is multi-layer printed board.
However, the patterns of intermediate-layer have not been included in this diagrams.
•
Lead Layouts surface
Lead layout of conventional IC CSP (chip size package)
Note on Schematic Diagram:
•
All capacitors are in
µ
F unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
• and tantalums.
All resistors are in
Ω
and 1 /
4
W or less unless otherwise specified.
• f : internal component.
• C
: panel designation.
Note:
The components identified by mark 0 or dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Note:
Les composants identifiés par une marque 0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce por tant le numéro spécifié.
• A
: B+ Line.
•
Power voltage is dc 1.5 V and fed with regulated dc power supply from battery terminal.
• Voltages and waveforms are dc with respect to ground under no-signal conditions.
no mark : PLAYBACK
∗ : Impossible to measure
•
Voltages are taken with a VOM (Input impedance 10 M
Ω
).
Voltage variations may be noted due to normal production tolerances.
•
Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production tolerances.
•
Circled numbers refer to waveforms.
•
Signal path.
E : PLAYBACK j : REC
J : OPTICAL IN
F : LINE IN d : USB input from PC
G : USB output to PC
N : MIC IN
* Replacement of IC401, IC501, IC601 and IC801 used in this set requires a special tool.
• The voltage and waveform of CSP (chip size package) cannot be measured, because its lead layout is different form that of conventional IC.
MZ-RH910
•
Waveforms
– MAIN Board –
1
IC501 8 (RFO)
(MD play mode)
8
IC301 9 (MCLK)
1.0 Vp-p
500 mV/DIV, 500 ns/DIV
2
IC501 ra (FE)
(MD play mode)
2.5 Vp-p
88 ns
1 V/DIV, 50 ns/DIV
9
IC301 q; (LRCK)
2,3 Vp-p
22.8
µ s
1 V/DIV, 10 µ s/DIV
Approx.
280 mVp-p
100 mV/DIV, 500 ns/DIV
3
IC501 rs (TE)
(MD play mode)
Approx.
100 mVp-p
200 mV/DIV, 500 ns/DIV
4
IC351 6 (MCK)
1.8 Vp-p
44.3 ns
1 V/DIV, 20 ns/DIV
6
IC801 <czz (OSCO)
2.6 Vp-p
44.3 ns
1 V/DIV, 20 ns/DIV
7
IC301 8 (BCLK)
2.2 Vp-p
354 ns
1 V/DIV, 100 ns/DIV
24 24
MZ-RH910
6-4. SCHEMATIC DIAGRAM – MAIN Board (1/9) –
• See page 36 for IC Block Diagrams.
(1/9)
W
M702
(SLED)
U
N
V
M703
OVER WRITE
HEAD UP/DOWN
M701
(SPINDLE)
U
N
W V
SLEDW
SLEDV
SLEDU
SLEDN
HD_DRV-
HD_DRV+
CLVW
CLVV
CLVU
CLVN
CN701
10P
C714
0.1
C716
0.1
R710 10k
R711 10k
R712 10k
SLD_CON_W
SLD_CON_V
R707 2.2k
R708 2.2k
R709 2.2k
C712
0.1
C713
0.1
SLD_CON_U
SLD_PWM
SLD_MON_U
SLD_MON_V
SLD_MON_W
XRST_MTR_DRV
CLV_MON_W
CLV_MON_V
CLV_MON_U
CLV_PWM
CLV_CON_U
CLV_CON_V
CLV_CON_W
C715
0.1
C717
0.1
TF1
TR1
Z12
Z11
FR1
FF1
XRST_MTR_DRV
SLD_CON_W
SLD_CON_V
SLD_CON_U
SLD_PWM
SLD_MON_U
SLD_MON_V
SLD_MON_W
TF1
TR1
ZI2
ZI1
FR1
FF1
CLV_CON_W
CLV_CON_V
CLV_CON_U
CLV_PWM
CLV_MON_U
CLV_MON_V
CLV_MON_W
XRST_MTR_DRV
SLD_CON_W
SLD_CON_V
SLD_CON_U
SLD_PWM
SLD_MON_U
SLD_MON_V
SLD_MON_W
TF1
TR1
ZI2
ZI1
FR1
FF1
CLV_CON_W
CLV_CON_V
CLV_CON_U
CLV_PWM
CLV_MON_U
CLV_MON_V
CLV_MON_W
A1
A2
A3
A4
A5
MZ-RH910
25 25
MZ-RH910
6-5. SCHEMATIC DIAGRAM – MAIN Board (2/9) –
• See page 36 for IC Block Diagrams.
HR601
OVER WRITE
HEAD
W601
W602
A1
A2
A3
A4
A5
C1
C2
(2/9)
C673
0.1
REG_DACVREFH
C668 1
C669 1
VOLTAGE DETECT
IC606
XC61CN1702NR
R663 220k
R662 470k
R659
100k
Q617
RT3WLMM-TP-1F
Q616,617
B+ SWITCH
-1
-2
R660
470k
R661
470k
+1.2V REGULATOR
IC604
R1180Q121C-TR-F
C601
R6695
0
1
+1.2V REGULATOR
IC602
R1160N121B-TR-F
R678
0
R608
USB_HOLD
Q616
S
RTL035N03
REG4_DVDD
D614
MA2SD32008S0
C612 22 6.3V
C613 22 6.3V
OR GATE
IC605
TC7S32LFU(TE85R)
IC607
XC61CN0902NR
C677
0.1
R685
10k
R682
1M
VOLTAGE
DETECT
R684
10k
R683
1M
-1 -2
Q618
RT3WLMM-TP-1F
RESET
SWITCH
C671
0.1
R679
220
R647
1M
REG5_OSC
SLEEP
RST_CONT
REG5_REG
SUSPEND
REG5_VSTB
3.3V
C614
C675
C616
D613
C609
C611
22 6.3V
0.01
C607 1
1
D601
MA2SD32008S0
22 10V
MA2SD32008S0
0.01
R653
22k
R612 2.2M
R605 C620
1k 0.047
C602 0.1
C604 0.1
R645 470k
R654 1M
1
C621
10
6.3V
Q601,602
OVER WRITE
HEAD DRIVE
R6621
2.2
R6623
2.2
CL604
C6679
47p
C623
220p
C622
47
6.3V
L601 10 µH
C627
47
6.3V
C628
1 R6620
2.2
C646
0.047
Q602
MCH6617-TL-E
D606
MA22D1700LS0
S S
D607
MA22D1700LS0
C6674
33p
100V
D6615
MA22D1700LS0
R6622
2.2
Q601
CPH5614-TL-E S
C6676
1000p
C6649
0.1
C650
10
6.3V
Q603
NTHD4508NTIG
S
S
R691
0
C652
10
6.3V
L606
10 µH
C625
0.1
C630
0.1
OVER WRITE HEAD DRIVE,POWER CONTROL
Q609
NTHD4508NTIG
B+ SWITCH
S
S
R689
0
C633
0.01
C634
1
C635
47
6.3V
C6680
1000p
R693
0
R6694
10
XCS_REC_DRV
R675
2.2M
C641
0.01
R616
1k
C642
0.047
R617
1k
R681
1M
C644
4700p
Q608
XP4314-TX
B+ SWITCH
-1
-2
DC IN
DETECT
R646
47k
L607
47 µH
R649
1
R648
1
R651
1
R629
2.2M
C645
0.01
C638
0.01
L605 22 µH
S
Q612
RTR025N03
SWITCHING
L603
10 µH
CL658
C637
10
6.3V
C643
2.2
C636
0.1
R618
100k
R619 100k
S
Q611
RTL035N03
B+ SWITCH
R686
0
C662
10
6.3V
D604
MA22D2800LS0
L608
4.7
µH
C672
4.7
R664
2.2
C658
47
6.3V
C666 4.7
C653
10
6.3V
R628
22
REG5_VSTB
MZ-RH910
26 26
SUSPEND
USB_HOLD
RECP
EFM_CLK
EFM
XCS_REC_DRV
VBUS_DET
SUSPEND
USB_HOLD
RECP
EFM_CLK
EFM
XCS_REC_DRV
VBUS_DET
VBUS_VB_CTL
RST_CONT
SDO0
SCK0
4FS
SLEEP
RMC_DTCK
XRST
3.3V
REG5_VSTB
REG5_REG
REG5_OSC
REG4_DVDD
REG_F
REG_DACVREFH
RST_CONT
SDO0
SCK0
4FS
SLEEP
RMC_DTCK
XRST
3.3V
REG5_VSTB
REG5_REG
REG5_OSC
REG4_DVDD
REG_F
REG_DACVREFH
DDC3
VB
R690
0
D1
D2
F1
F2
MZ-RH910
6-6. SCHEMATIC DIAGRAM – MAIN Board (3/9) –
• See page 24 for Waveforms.
• See page 36 for IC Block Diagrams.
MZ-RH910
(3/9)
C513
0.01
OFTRK
BOTM
PEAK
C519
0.1
C523
0.1
C524
0.01
C530
1
R505
10
C536
0.022
C538
4700p
C553
4.7
6.3V
C554
0.1
C1
C2
L503
10 µH
AMICE_FS256
C545 0.1
C547 0.047
ADIP
C550 0.047
S_MON
C552 0.01
APCREF_DA
S0
S1
XLDON
PLSE_XDC
PEAK
BOTM
OFTRK
TE
FE
ABCD
VREF
XRST_RF
SSB_DATA
SSB_CLK
ADIP
S_MON
APCREF_DA
VC
RFI
MDVCC_CTL
AMICE_FS256
VIN
S0
S1
XLDON
PLSE_XDC
PEAK
BOTM
OFTRK
TE
FE
ABCD
VREF
XRST_RF
SSB_DATA
SSB_CLK
ADIP
S_MON
APCREF_DA
VC
RFI
MDVCC_CTL
AMICE_FS256
VIN
REG03
C
D
A
B
IY
IX
S0
IIN
LDK
MDVCC
GND
F
VREF
VCC
S1
JY
JX
TRK+
FCS-
FCS+
TRK-
L1
L2
CONT
PLSE_XDC
PVCC
CN501
26P
TRK+
FCS-
FCS+
TRK-
FB5501
0
XLDON
PLSE_XDC
CL518
CL515
CL511
S1
S0
C570
4.7
6.3V
C573
220p
L507
R501
2.2k
R502
1k
C525
4700p C531
0.01
C533
0.01
VC
FB5503
0
C558
1000p
Q502
2SA2018TL
Q502,503
B+ SWITCH
R513
10k
Q503
2SC5383-TP-1F
R514
47k
R515
10k
R516
47k
C560
0.1
C564
4.7
6.3V
L505
10 µH
27 27
C527
0.1
C559
4700p
R517
10k
Q504
2SC4627J-C
(TX).SO
RF BUFFER
R518
47k
R519
1k
C555
4700p
C565
0.1
C529
0.1
L502
10 µH
C557
0.1
C518
4.7
6.3V
C520
0.1
C556
4.7
6.3V
L504
10 µH
MDVCC_CTL
L506
10 µH
R524
220
R520
470
C526
100p
C566
0.1
C567
4.7
6.3V
RFI
VIN
I1
I2
The components identified by mark 0 or dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant le numéro spécifié.
MZ-RH910
6-7. SCHEMATIC DIAGRAM – MAIN Board (4/9) –
• See page 36 for IC Block Diagrams.
(4/9)
DRY BATTERY
SIZE"AA"
(IEC DESIGNATION R6)
1PC. 1.5V
(BATTERY CASE)
W401
W402
NICKEL METAL HYDRIDE
RECHARGEABLE BATTERY
NH-10WM
1PC. 1.2V 900mAh
W403
W404
C4462
100p
C424
100
6.3V
C453
0.047
C4438
1000p
C452
0.1
R462
220k
R467
10k
Q451
RTQ035P02TR
S
Q451,452
VOLTAGE LIMITER
R463
220
R464
100k
-2 -1
Q452
RT3WLMM-TP-1F
D458
MA8056-L-TX
R466
2.2M
J402
DC IN 3V
CN451
7P
(USB)
VBUS
DATA-
DATA+
IO
GND
SW_A
SW_B
CL453
R401
0
CL460
(GND)
LF4451
FB4451
C4465
1000p
C4455
1000p
FB4452
R4460
0
THP401
D4436
EDZTE616.8B
D450
NSR0320MW2T1G
C4416
1000p
C4464
0.1
Q403
RTL035N03
S
Q403,406
GROUND LINE
SWITCHING
C4463
100p
C402
220
5V
C403
220
5V
Q432
TPC8501
CHARGE
CONTROL
R455
1M
R456
470k
R438
100k
R437
220k
R432
1
R433
0.47
Q433
2SC5383-TP-1F
DC IN
DETECT
R421
100k
R402
0
LF401
C4418
1000p
R418
100k
C419
0.1
R419
10k
R420
4.7k
C420
0.1
C426
22
16V
Q401
TPC8601
REGULATOR
UDP
UDM
Q407
RT1N144U-TP-1
CHARGE
ON/OFF
CONTROL
CHG_TYPE2
BATT_MINUS_MON
CHG_TYPE2
CHG_I_CTL3
CHG_I_CTL2
CHG_MON
CHG_U
CHG_PWM
HIDC_MON
STAND_DET
NI_VI_CTL
IC401
MM1690NCBE
∗
CSP
(Chip Size Package)
R423 220k
R422
1M
-1 -2
Q406
RT3WLMM-TP-1F
R416
0
R425
2.2k
R426 0
R436
220k
C415
0.1
STAND_DET
CHG_PWM
NI_VI_CTL
Q441,442
USB CHARGE
ON/OFF CONTROL
Q441
XP4314-TX
CHG_U
R441
0
-2
-1
R442
100k
D401
NSR0320MW2T1G
CL433
(GND) C406
0.1
Q442
RTL035N03
S
HIDC_MON
R443
100k
D3353
UDZSTE-175.1B
G4
G1
G2
G3
G5
M1
M3
M2
H1
UDP
UDM
D1
D2
GND_SW
VBUS_MON
BATT_MINUS_MON
CHG_TYPE2
CHG_I_CTL3
CHG_I_CTL2
CHG_MON
CHG_U
CHG_PWM
HIDC_MON
STAND_DET
NI_VI_CTL
MZ-RH910
28 28
6-8. SCHEMATIC DIAGRAM – MAIN Board (5/9) –
•
See page 36 for IC Block Diagrams.
MZ-RH910
(5/9)
I1
I2
C9001
0.01
RESET SIGNAL GENERATOR
IC903
XC61CC1702NR
C961
0.1
R908
22k
R910
22k
G4
G1
G2
G3
G5
L906
4.7
µH
C909
22
16V
C906
1
L901
100
µH
C902 0.1
C903 0.01
C901 0.1
R903
1M
R906
47k
C959
0.1
CL935
R904
1M
C919
0.022
R907
10k
C908
0.01
C916
10
6.3V
L904
10
µH
R912
220k
C958
1
D906
NSR0320MW2T1G
C915
10
6.3V
C922
100
6.3V
L903
10 µH
C923
47
6.3V
D904
HRC0201ATRF-E
C920
0.1
C924
47
6.3V
L907
47 µH
R977
100k
S S
Q901
US6K1TR
B+ SWITCH
R927
1k
R930
47k
R926
100k
R968
470k
-1
Q906
RT3WLMM-TP-1F
WAKE UP
SWITCH
-2
R966 47k
R969
2.2k
R924
470k
4FS
C931 2.2
C932 0.01
R962
0
C933
2.2
C939
22
6.3V
R925
47k
R933
220k
C940
22
6.3V
R934
22k
R960
0
C945
2200p
C946
4700p
C935 2.2
C936 2.2
R935 100k
R936 47k
R961
4.7
C948
22
6.3V
C937 2.2
R937 22k
R938 47k
SCK0
XCS_PWR_IC
SDO0
29 29
J1
J2
J4
J 6
J3
J7
J 8
J 5
L2
L1
MZ-RH910
MZ-RH910
6-9. SCHEMATIC DIAGRAM – MAIN Board (6/9) –
•
See page 24 for Waveforms.
•
See page 36 for IC Block Diagrams.
MZ-RH910
J 5
J 6
J3
J 8
J7
J1
J2
J4
(6/9)
R358
0
CL362
R356
2.2k
R361
22
C370
1
D_VCONT_PWM
FS512
DCLSOUTL
C361 22 6.3V
C364 0.1
DCLSOUTR
R365
0
R366
0
R353 22k
R354 0
SWITCHING DRIVER,
HEADPHONE AMP
IC351
NJU8716AV(TE2)
H1
L252
47 µH
L152
47 µH
Q352
RT1P441U-TP-1
MUTING
CONTROL
XMUTE
R355
1M
RMC_DTCK
RMC_KEY
Q904
RTL035N03
S
R923
2.2M
Q904,905
B+ SWITCH
R939
100k
Q905
XP4314-TX
-2
-1
R357
47k
-1
-2
Q353
RT2C00M
MUTING
CONTROL
F351
0.25A
125V
R362
470k
C351
0.1
R364
0
D_VCONT_PWM
DCLSOUTR
DCLSOUTL
FS512
XMUTE
C3372
1000p
C9957
220p
WK_DET
REC_KEY
RMC_KEY
HALF_LOCK
XRST2
XCS_PWR_IC
C3374 1000p
C371
0.1
FB1151
FB2251
FB3355
FB3353
FB3357
RVDD
DTCK
KEY_R
RGND
FB3351
R359
470k
R360
100k
C154
220
2.5V
C254
220
2.5V
Q351
NTHD4508NT1G
MUTING
S
S
-1
-2
R255
10
R256
47
R156
47
R155
10
D_VCONT_PWM
DCLSOUTR
DCLSOUTL
FS512
XMUTE
TEMP_THP
WK_DET
REC_KEY
RMC_KEY
HALF_LOCK
XRST2
XCS_PWR_IC
S_GND
GND
J351
Q151,251
MUTING
C352
0.1
R251
4.7k
R151
4.7k
R351
1M
Q251
2SK354700LS0
R352
47k
30 30
The components identified by mark 0 or dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant le numéro spécifié.
MZ-RH910
6-10. SCHEMATIC DIAGRAM – MAIN Board (7/9) –
• See page 36 for IC Block Diagrams.
(7/9)
R476
4.7k
R477
4.7k
R478
4.7k
SWITCH UNIT
INCLUDING
LCD101
VC01
JOG_B
JOG_A
SET_KEY_2
SET_KEY_1
REC
SDO(OLED-LCD_SI)
SDI(OLED-LCD_SO)
SCK
CS
RST
XWK
PAUSE
DGND
OLED_VCC
OLED_VCC
OLED_LCD_VDD
SGND
XRST2
WK_DET
REC_KEY
RMC_KEY
HALF_LOCK
XCS_PWR_IC
S_GND
GND
TEMP_THP
CN471
18P
R498
0
RST_CONT
SDO0
SCK0
4FS
SLEEP
RMC_DTCK
XRST
3.3V
REG5_VSTB
REG5_REG
REG5_OSC
REG4_DVDD
REG_F
REG_DACVREFM
VB
DDC3
RST_CONT
SDO0
SCK0
4FS
SLEEP
RMC_DTCK
XRST
3.3V
REG5_VSTB
REG5_REG
REG5_OSC
REG4_DVDD
REG_F
REG_DACVREFM
D471 MA2Z748001S0
C4485
0.1
XRST2
WK_DET
REC_KEY
RMC_KEY
HALF_LOCK
XCS_PWR_IC
TEMP_TMP
C8858
1000p
R894
100k
R899 0
IC891
AK6512CM-E2
EEPROM
R473
0
R490 100
R489 100
R491 100
JOG_B
JOG_A
SET_KEY_2
SET_KEY_1
REC_KEY
SDO1
SDI1
SCK1
XCS_LCD
LCD_RST
WK_DET
PAUSE
XRST2
R487
0
+2.4V REGULATOR
IC471
XC6219B242MR
R488
220k
C481
1
C480
1
C892
0.1
R895
100k
R897
0
R484
220k
-1 -2
Q471
RT2C00M
RESET
SWITCH
R480
100k
C479
0.1
R485
470k
R483
470k
PROTECT
UMD_PROTECT
HALF_LOCK
OPEN_CLOSE_SW
XHOLD_SW
XGUM_ON
S894
(BATTERY INSERT DETECT)
SL891
S890
(PROTECT DETECT)
S891
(Hi-MD PROTECT DETECT)
S892
(HALF LOCK)
SL892
S893
(OPEN/CLOSE DETECT)
SL894
R8891
1k
C8893
1000p
OFF
S895
HOLD
HOLD
R8892
1k
REG5_REG
MZ-RH910
31 31
K1
K2
K3
K4
K5
K6
MZ-RH910
MZ-RH910
6-11. SCHEMATIC DIAGRAM – MAIN Board (8/9) –
•
See page 24 for Waveforms.
•
See page 41 for IC Pin Function Description.
(8/9)
K1
K2
K3
K4
K5
K6
GND
SDO0
SCK0
OPT_DET
XJACK_DET
DIN1
XOPT_CTL
ADDT
FS256
LRCK
XBCK
XCS_ADC
XPD_ADC
XMIC_DET
SUSPEND
USB_HOLD
RECP
EFM_CLK
EFM
XCS_REC_DRV
VBUS_DET
VBUS_VB_CTL
CHG_PWM
CHG_MON
GND_SW
VBUS_MON
BATT_MINUS_MON
CHG_I_CTL2
CHG_I_CTL3
HIDC_MON
CHG_TYPE2
STAND_DET
NI_VI_CTL
XRST_MTR_DRV
SLD_CON_W
SLD_CON_V
SLD_CON_U
SLD_PWM
SLD_MON_U
SLD_MON_V
SLD_MON_W
TF1
TR1
ZI2
ZI1
FR1
FF1
CLV_CON_W
CLV_CON_V
CLV_CON_U
CLV_PWM
CLV_MON_U
CLV_MON_V
CLV_MON_W
CHG_PWM
CHG_MON
GND_SW
VBUS_MON
BATT_MINUS_MON
CHG_I_CTL2
CHG_I_CTL3
HIDC_MON
CHG_TYPE2
STAND_DET
NI_VI_CTL
XRST_MTR_DRV
SLD_CON_W
SLD_CON_V
SLD_CON_U
SLD_PWM
SLD_MON_U
SLD_MON_V
SLD_MON_W
TF1
TR1
ZI2
ZI1
FR1
FF1
CLV_CON_W
CLV_CON_V
CLV_CON_U
CLV_PWM
CLV_MON_U
CLV_MON_V
CLV_MON_W
SDO0
SCK0
OPT_DET
XJACK_DET
DIN1
XOPT_CTL
ADDT
FS256
LRCK
XBCK
XCS_ADC
XPD_ADC
XMIC_DET
SUSPEND
USB_HOLD
RECP
EFM_CLK
EFM
XCS_REC_DRV
VBUS_DET
VBUS_VB_CTL
S0
S1
XLDON
PLSE_XDC
PEAK
BOTM
OFTRK
TE
FE
ABCD
VREF
XRST_RF
SSB_DATA
SSB_CLK
ADIP
S_MON
APCREF_DA
VC
RFI
MDVCC_CTL
AMICE_FS256
VIN
REGO3
S0
S1
XLDON
PLSE_XDC
PEAK
BOTM
OFTRK
TE
FE
ABCD
VREF
XRST_RF
SSB_DATA
SSB_CLK
ADIP
S_MON
APCREF_DA
VC
RFI
MDVCC_CTL
AMICE_FS256
VIN
UDP
UDM
D_VCONT_PWM
FS512
XMUTE
DCLSOUTR
DCLSOUTL
FCRAMVDD
D_VCONT_PWM
XMUTE
DCLSOUTR
DCLSOUTL
C8859
1000p
R868
0
C847
0.1
R843
2.2k
D_VCONT_PWM
XCS_REG_DRV
GND_SW
CHG_TYPE2
JOG_A
JOG_B
VBUS_DET
SSB_DATA
SSB_CLK
UMD_PROTECT
PLSE_XDC
DRAM_HOLD_DET
DRAM_VDD_CLR
R835
220k
C813
0.047
R823
10k
R810
0
R834
470k
R957
220k
R836
47k
XLDON
ZI2
ZI1
SL802
R861
10
REG5_REG R813 0
R814 0
FS256
ADDT
LRCK
XBCK
FB807
0
FB8810 0
FB802 0
C801 6p
R808 2.2k
C802
6p
X802 22.5792MHz
R804 22
R805 22
USB_HOLD
SUSPEND
FB808
0
R802
0
X801
48MHz
CL8001
C835
0.1
3.3V
REG_F
REG5_VSTB
REG5_OSC
REG5_REG
32
C811
0.1
C839
0.1
C816
47
6.3V
CL8029
OPEN_CLOSE_SW WK_DET
R880
47
R879
47
R858
10
R827
100
R8813
0
R842
47k
VDR8801
Q803
2SC5383-TP-1F
WAKE UP
SWITCH
R877
1M
C861
0.1
CLV_CON_U
SLD_PWM
FR1
FF1
TF1
TR1
DCLSOUTL
DCLSOUTR
4FS
ADIP
VIN
C814
0.1
C817
0.1
C830
1000p
C843
0.1
C812
1
D803 MA2SD32008S0
C810
0.1
APCREF_DA
REG_DACVREFM
REG5_VSTB
XRST
HALF_LOCK
C827
C803
R860 10k
0.1
0.01
REC_KEY
RST_CONT
RMC_KEY
BATT_MINUS_MON
VBUS_MON
WK_DET
HIDC_MON
STAND_DET
SET_KEY_2
SET_KEY_1
VREF
CHG_MON
R837 2.2k
TEMP_THP
R898
100k
C828
1000p
R857
470k
R854
47k
TH801 C888
0.01
TE
S_MON
R820
220
R822
1M
VC
FE
ABCD
BOTM
PEAK
R817 1k
R815
220k
C809
0.1
R818
2.2k
R821 2.2M
R819
1k
C857
22p
R811
10k
R812
100k
C805 0.47
C804 0.01
C808
1
RFI
Q801,802
B+ SWITCH
R865
1M
Q801
2SK1830-TE85L
S
S
Q802
XP152A12C0MR
R866
1M
C856
0.1
+2.5V REGULATOR
IC804
PST3325UL
C846
0.1
C845
47
6.3V
L802
22
µH
C819
47
6.3V
C850
0.1
R841
10
L801 10
µH
L803
10
L804
10
C8864
470p
C853
0.1
CL8055
D801
HRC0201ATRF-E
C822
0.1
C818
10
6.3V
C823
0.1
C820
0.1
32
MZ-RH910
6-12. SCHEMATIC DIAGRAM – MAIN Board (9/9) –
• See page 24 for Waveforms.
• See page 36 for IC Block Diagrams.
(9/9)
SDO0
SCK0
OPT_DET
XJACK_DET
DIN1
XOPT_CTL
ADDT
FS256
LRCK
XBCK
XCS_ADC
XPD_ADC
XMIC_DET
GND
L1
L2
M 1
M2
M 3
SDO0
SCK0
OPT_DET
XJACK_DET
DIN1
XOPT_CTL
ADDT
FS256
LRCK
XBCK
XCS_ADC
XPD_ADC
XMIC_DET
C327
1
+2.1V REGULATOR
IC302
XC6219B212MR
C328
1
C883
10
6.3V
ADDT
XBCK
FS256
LRCK
SDO0
SCK0
XCS_ADC
XPD_ADC
R309 1k
R310 1k
R884
470k
L881
100 µH
0.1
R314
C325
0
DC/DC
CONVERTER
IC881
MM3005BNLE
L303
10 µH
C323
10
6.3V
C324
0.1
C320
2.2
6.3V
C319
0.1
C202
1
C102
1
C208
4.7
6.3V
C311 0.1
C310
10
6.3V
C318
2.2
6.3V
C312
47 6.3V
C313
47
6.3V
C314 0.1
C315 10 6.3V
C316 22 6.3V
R312
10
C108
4.7
6.3V
C107
47
4V
C207
47
4V
D881
MA2SD32008S0
C884
10
6.3V
C885
1
R882
470k
R890
220k
R201
47k
R101
47k
XOPT_CTL
R304
100k
R306
10k
DIN1
XJACK_DET
R303
R305 100
Q301
2SA2018TL
B+ SWITCH
R301
1k
C303
0.1
FB3301
FB1101
FB2201
R203
22k
R103
22k
C201
100p
C101
100p
OPT_DET
R302
R206
10k
R207
22k
C205
0.1
C206
1000p
R107
22k
R106
10k
C105
0.1
XMIC_DET
C106
1000p
C204
2200p
C104
2200p
C3309
1000p
C3301
100p
C3302
2200p
C3308
1000p
R881
220k
R883
1M
+2.2V REGULATOR
IC882
R1180Q221B-TR-F
-1 -2
Q881
RT3WLMM-TP-1F
R886
100k
Q883
RT1N144U-TP-1
C886
0.01
R885
1M
Q881,883
REGULATOR CONTROL
D884
MA2Z748001S0
D885
MA2Z748001S0
C887
1
C895
0.1
R873
10k
D883
MA2SD32008S0
R887
100k
-1
-2
R888
220k
Q884
XP4314-TX
VOLTAGE
DETECT
R892
220k
Q885,886
B+ SWITCH
Q885
RTL035N03
S
Q886
XP4314-TX
-2
-1
R893
2.2M
C891
0.1
R307
100
EDZTE616.8B
R872
10k
FB2202
FB1102
FB3302
D3305
FFCLR
DRAM_HOLD_DET
DRAM_ALONE
DRAM_VDD_CLR
DVCC
DGND
D-IN
C3306
4700p
FCRAMVDD
FCRAMVDD
REG5_REG
VB
J301
LINE IN
(OPT)
J302
MIC
(PLUG IN POWER)
MZ-RH910
33 33
MZ-RH910
MZ-RH910
Q301
Q451
Q452
Q603
Q608
Q609
Q611
Q612
Q616
Q617
Q618
Q801
Q802
Q803
Q881
Q883
Q884
Q885
Q886
Q901
Q904
Q905
Q906
IC471
IC602
IC604
IC606
IC607
IC701
IC804
IC881
IC882
IC891
IC901
IC903
•
Semiconductor
Location
Ref. No. Location
D450
D458
D604
D801
D881
D882
D883
D884
D885
D904
D905
D906
D3352
D3353
D4441
E-6
H-4
H-2
H-4
G-9
I-10
D-2
I-8
I-5
F-3
H-6
D-8
E-7
E-7
E-7
H-4
F-4
G-4
F-3
I-6
H-6
G-6
D-7
D-9
J-5
I-5
H-5
F-2
H-4
F-2
F-7
E-7
E-6
F-5
G-2
I-5
I-5
J-3
H-9
F-5
F-5
G-3
F-4
E-6
I-6
E-8
E-7
F-8
H-3
I-4
6-13. PRINTED WIRING BOARD – MAIN Board (Component Side) –
1 2 3 4 5
: Uses unleaded solder.
6 7
A
B
C
D
E
I
F
G
H
8 9
S890
(PROTECT DETECT)
S891
HI-MD
PROTECT DETECT
10
S890
S891
11
OPTICAL
PICK-UP
BLOCK
(ABX-UJ) MAIN BOARD
(COMPONENT SIDE)
D4441
C3332
R303
R618
1C 2B 2E
Q608
1E 1B 2C
R619
2D 1G 1S
Q901
2S 2G 1D
C937
R976
R977
C4427
D905
R930
R927
+
R936
48
49
C4438
D D S
Q611
D D G
+ C916
C919
C920
33
32
R904
C940
C939
D604
+
+
R691
C933
1E
1B
2C
C673
1C
2B
2E
CN501
1
2
IC607
C677
4
3
1
26
C570 +
C573
FB5501
5
4
L507
IC602
C601
3
1
C659
S
D
D
R659 C625
3 G
D
D
4
C668
C669
2
1
IC604
C703
R709
C702
R708
C701
C714
R707
2E
2B
1C
2C 1B 1E
C3304
29
42
C716
28
15
14
C710
C709
R710
C708
C707
R711
R712
R884
+
Q881 R882
2E 2B 1C
R890
R883 R881 R886
C883
L881
4
D881
A K
5
43
R713 C712 C713
2C
1B
1E
D
D
G
D
D
S
C706
R887
1
C705
56
D885 D884
1E
1B
2C
D882
D883
1C 3
2B
2E
4
K A
C887
R888 C814
C818 +
C816 +
L607
L801
C820
2
1
C885
Q883
B C E
R873 C895
IC882
C817
3
1
C892
8
R895
5
1
C3302
4
+ C312
+ C208
+ C315
+ C316
+ C313
+
C356
C809
R817
R821
R818
R822
R819
3
4
IC606
1
2
2E
2B
1C
2C
1B
1E
C906
C827
R837
C810 B C E Q803
C918
C902
C901
17
D904
64
1
R920
1C 2B 2E
Q906
1E 1B 2C
R968 R966
1
4
8
4
5
5
Q603
1
8
R877
C811
C853
+ C923 + C652
L606
Q802
Q612
K
D906
A
S G
C8859
D
R455 R456 C8858
C954
R918
R917
C958
L903
C915 +
C961
2
R969
3
IC903
K A
R908
1
R464
1E
1B
2C
1C
2B
2E
R462 R466
D458
D D S
Q904
D D G
2C 1B 1E
Q905
4
C453 C452
2E 2B 1C
R939
D
D
G
D
D
S
Q451
R898
R923
C888
R866
3
G D S
4
IC804
1
2
D801
R865
C856
Q801
C823
7 6
LF4451
5
CN451
(USB)
LF401
1
R416
D450
C9001
C4418
C419
C4416
Q301
B C E
R304
R306
C3331
+
C355
C3374
8
1
R481
C480
5
R420
C420
1
R355
D3352
5
4
4
3
THP401
L152
C3305
L252
RVDD
DTCK
KEY_R
FB3357 RGND
D3353
A K
S893
S893
OPEN/CLOSE
DETECT
J301 (1/2)
LINE IN
(OPT)
1-866-346-
11
(11)
J351 (1/2) i
J
34 34
6-14. PRINTED WIRING BOARD – MAIN Board (Conductor Side) –
1 2 3 4 5
: Uses unleaded solder.
6
A
MAIN BOARD (CONDUCTOR SIDE)
S892
(HALF LOCK)
1
U
N
7
W V
M702
(SLED)
8
NICKEL METAL HYBRID
RECHARGEABLE BATTERY
NH-10WM
1PC. 1.2V 900mAh
B
C
D
E
F
G
H
I
J
9 10 11 12
S895 SL892
M
M703
OVER WRITE
HEAD UP/DOWN
S895
HOLD
HOLD
OFF
R8892
C8893
U
M701
(SPINDLE)
10
W
N
V
FB3301
J301 (2/2)
LINE IN
(OPT)
(CHASSIS)
J302
MIC
(PLUG IN POWER)
J351 (2/2) i
C3308
C3309
R307
D3305
C206
C204
FB2202
R357
2C 1C
Q353
2B E 1B
1
4
Q351
8
R251
5
C3372
FB3351
R256
R255
(CHASSIS)
C3306
FB3302
Q251
Q151
1
D471
R206
Q352
FB2201
R107
FB1101
CL362
C362 +
+
C254
+
C154
R489
CN471
F351
16
1
SWITCH UNIT
(INCLUDING LCD101)
+
R101
C101
R106
C108
C107 +
C207
C367
R201
C102
R843
SL802
C4485
18
15
21
+
9
8
C364
+
1B E 2B
Q471
1C 2C
1
IC302
R309
14
22
C314
R957
R836
R811
R812
C805
CL8029
C803
R827
VDR8861
C479
3
+
8
28
C318
J402
–
DC IN 3V
+
5
4
C328
+
D4436
D457
A
D4435
K
C4425
R314
+
+
L303
W404
FB802
+
10
FB808
FB8810
1
SL891
R808
FB807
C801
27 140 139 276 274 44 113 14 37 146 149 138
118 111 239 54 277 40 108 107 283 281 147
219 241 221 247 270 152 69 67 25 70 65 184 196
24 175 245 250 267 264 72 71 26 66 51 136 134
C819
L802
CN701
L806
C821
X801
R807
R806
R804 CL8055
R6623
D6616
C835
SL801
SL894
X802
FB8803
D803
CL8001
C850
R8813
R813
R878
C828
R857
C6680
R6622
1G S 2G
S894
BATTERY
INSERT DETECT
C518 +
L502
R526
L503
W403
R525 C524
C520 C554
C556 +
C550
C530 + C553
C4462
L504
C836
C8864
C616
+
+
C627 +
CL518
L803
C628
CL511
C557
L601
FB5503
C521
C552
+ C635
L906
CL515
C838 +
L804
R501
R502
C526
R524
R520
R518
R519
C555
C565
E C B
Q504
C643
C607
5
IC605
4
R628
C666
R664
R6695
L608
1 3
R653 C602
D614
D601
C675
D613
C636 R693
R678
R6694
R690
R651
R649
R648
R675
R616
C641
C642
R617
R629
C645
C672
D602
K A
C633 C638 R689
+ C637
L603
+
C411
C533
C567 +
C409
L907
L901
K A
D443
R505
L506
+ C909
C552
C545
R686
1C 2B 2E
Q406
1E 1B 2C
R443
1C 2B 2E
CL935
Q441
CL658
1E 1B 2C
Q407
R436
G D D
Q442
S D D
D444 A K
R433
R432
C560
L505
C558
R437
R422
R515
R516
E C B
Q503
R513
R514
E C B
Q502
4
5
C424 +
Q433
D440
C4465
Q432
1
8
S
D
D
Q403
G
D
D
D6615
C622 +
+ C426
Q601
CL460
FB4452
C4455
D4456
C4467
R4460
C4466
FB4451
C4456
CL453
D4442
HR601
OVER WRITE
HEAD
C4428
W402
1D
W601
W602
2D
C623
CL604
+
K
D606
A
D608
C6649 2S
R625
K A
2G
1D
1G
1S
R6621
2D
Q602
R6620
L605
C6676
K A
D605
D607
DRY BATTERY
SIZE “AA”
(IEC DESIGNATION R6)
1PC. 1.5V
(BATTERY CASE)
(CHASSIS)
C653
D4443
+
C4429
+ C922
+ C402
+
C403
W401
C406
C4463
K
CL433
(GND)
8
1
A D401
Q401
5
4
C4464
(CHASSIS)
(CHASSIS)
11
(11)
MZ-RH910
35 35
Q151
Q251
Q351
Q352
Q353
Q401
Q403
Q406
Q407
Q432
Q433
Q441
Q442
Q471
Q502
Q503
Q504
Q601
Q602
IC301
IC302
IC351
IC401
IC501
IC601
IC605
IC801
•
Semiconductor
Location
Ref. No. Location
D401
D440
D443
D444
D457
D471
D601
D602
D605
D606
D607
D608
D613
D614
D803
D3305
D4435
D4436
D4442
D4443
D4456
D6615
D6616
J-8
I-7
J-7
I-8
G-8
F-8
H-7
F-2
J-10
F-11
H-10
G-11
I-4
H-2
G-8
H-8
C-5
I-4
I-6
J-9
J-5
I-7
I-7
F-11
H-10
G-11
E-11
F-11
G-10
H-3
E-11
G-2
G-2
G-2
F-2
F-2
I-11
F-11
D-11
E-9
I-7
I-8
D-4
D-4
F-3
H-10
D-9
G-8
F-8
G-5
MZ-RH910
MZ-RH910
•
IC Block Diagrams
IC301 AK5356VN-L
MICR 22
MVDD 23
MVSS 24
MVCM 25
MRF 26
MPWR 27
LIN 28
21 20 19 18 17 16 15
VCOM
MIC POWER
SUPPLY
RESET 14 PDN
CONTROL
REGISTER
INTERFACE
13
12
11
CSN
CCLK
CDTI
10
9
8
LRCK
MCLK
BCLK
1
VCOM
2 3 4 5 6
A/D
CONVERTER
AUDIO
INTERFACE
CONTROLLER
7
IC302 XC6219B212MR
IC471 XC6219B242MR
VCC
VIN 1
VSS 2
VCC
CE 3
ON/OFF
CONTROL
VOLTAGE
REFERENCE
+
–
CURRENT
LIMIT
5 VOUT
4 NC
MZ-RH910
IC351 NJU8716AV (TE2)
VREGO 1
CFB 2
VG 3
VREF 4
VSS 5
MCK 6
VDD 7
IN2 8
16 VREG
LOW VOLTAGE
DETECTOR VDD
REGULATOR
LOW VOLTAGE
DETECTOR VRGO
LEVEL SHIFTER
LEVEL SHIFTER
PRE
DRIVER
HEADPHONE
AMP (P–N)
15 VDD2
14 OUT2
13 VSSO
LEVEL SHIFTER
LEVEL SHIFTER
PRE
DRIVER
12 VSSO
11 OUT1
HEADPHONE
AMP (P–N)
10 VDD1
9 IN1
IC401 MM1690NCBE
24 23 22 21 20 19 18 17
A/D
CONVERTER
BAT– 25
RF1 26
IAMP_CAL 27
AMP_SEL 28
+ –
16 TYPE2
15 CFB
14 IAMP_CTL
13 A7CAL_SW + –
+ – VREF
VREF
I_CTL2 29
CHG_SW1 30
BAT+ 31
VO 32
SWITCHING
CONTROL
RECEIVER
CHARGE
CONTROL
ON/OFF
VREF
–
+
1 2 3 4
12 IN1–
11 TYPE1
10 WDT
SWITCHING
CIRCUIT
TIME
DIVIDER
DET
OSC
COMPARATOR
BLOCK
CHARGE CONTROL
ON/OFF
CHARGE SWITCH
CONTROL
5 6 7
ERROR LED
CONTROL
WAKE-UP
CONTROL
9 LED_CTL
8
36 36
IC501 SN761059AZQLR
NPPO 43
AVCC2 44
OFTRK 45
TON-C 46
VCC2
OFTRK
T-ON
BOTM
PEAK
47
48
D
A
B
C
49
50
51
52
AVCC 53
JX
JY
LY
54
55
56
PEAK/
BOTTOM
VCC
42 41 40 39 38 37 36 35 34 33 32 31 30 29
SERIAL
INTERFACE
VCC2
VCC
ADIP
POWER
SUPPLY
A+B+C+D
I+J
NPP
TON
CSL
AW+DW
TON PEAK
TON BOTM
ADIP
TE
TWPP
PK/BTM
AW
CSLO
S-MONITOR
TEMP
VREF09
A-C
D-C
MALFA
MIJ
AWBPF
DW
DWBPF
OFTTH
APC
ADIP-BPF
VFREF0.4
I-J
TE
FE
ABCD
TPP/WPP
RF
APC
28
27
26
CN
CPGND
CLK
25
24
CCSL2
CDN
23 ADFG
22 WPP-LPF
21 SMON
20
19
18
PD-BUF
PD-NI
PD-I
17
16
PDO-SOURCE
PDO-SINK
15 A-C
1 2 3 4 5 6 7 8 9 10 11 12 13 14
MZ-RH910
37
MZ-RH910
IC601 SC901585VAR2
HOLD OUT 86
RST OUT 87
PVBUS 88
CRST 89
DVDD IN
DVDD OUT
90
91
HOLDC 92
OSC OUT 93
SLEEP IN 94
RST IN 95
PGND2 96
REG IN
REG OUT
97
98
SUS IN 99
PGND2 100
TSBV IN 101
TSBV OUT 102
V33R 103
PGND1 104
VSTB IN
VSTB OUT
105
106
BATSEL 107
V33RO 108
BUFFER
PVBUS
RF1 109
INM1 110
NC A12 85
84 83 82 81 80
VG
79 78 77 76 75 74 73 72 71
CHARGE PUMP
70 69 68 67 66 65 64 63 62 61 60 59 58 57
VG3 VIF
DTC1
VREC
111
112
VREC
1
2.0V
RESET
RESET
LOGIC
DRIVER
CIRCUIT
HOLD
LOGIC
POWER SWITCH
PWM
VREC STEP UP-DOWN
CONVERTER DRIVER
EFM BOTTOM
PRE DRIVER
EFM TOP
PRE DRIVER
SYSTEM
CONTROL
H-BRIDGE
DRIVER
DAC
VC
VREF
BUFFER
CONTROL
BUS POWER
STEP DOWN CONVERTER
DRIVER
SELFPOWER
STEP UP-DOWN CONVERTER
DRIVER
PWM
DAC
V3 STEP UP-DOWN
CONVERTER DRIVER
LVDT
VBUS
LVDT
BANDGAP
REFERENCE
WAKE
VBUS
56 LATCH
55 XWKO
54 VBUS
53 WAKEC
52 V33UO
51 VBUS DET
50 VBUSREF
49 L5 2
48 PGND5
47 PGND5
46 POWFB
45 L5 1
44 PGND5
43 VBUSSEL
42 CLM
41 POWP2
40 INP3
39 INP2
38 CLP
VPDRV
37 POWP1
36 VPDRV
35 RF2
34 DTC2
33 INM2
32 INM3
31 DTC3
30 RF3
29 NC M1
V3FB
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
IC602 R1160N121B-TR-FA
VDD 1
GND 2
CE 3
REGULATOR
CURRENT
LIMIT
5 VOUT
4 ECO
38
MZ-RH910
IC701 SC901583EPR2
VI1 1
WI1 2
GNDW1 3
56 55
VC
3PHASE
CONTROL
CH1
54 53 52
VG
51
VC
50 49 48 47 46 45
VC LOW
VOLTAGE
DETECTOR
BIAS
ROE
VC
3PHASE
CONTROL
CH2
44 43
VG VC VC VG
42
41
VI2
WI2
40 GNDW2
WO1 4
VMVW1 5
VO1 6
GNDUV1 7
UO1 8
VMU1 9
3PHASE
PRE DRIVER
CH1
VG VC
VMR1 10
RO1 11
PGND1 12
FO1 13
VMF1 14
H-BRIDGE
PRE DRIVER
CH1
VC
H-BRIDGE
CONTROL
CH1
15 16 17 18
VG VC
–
+
U
19
VG VC
–
+
V
20
VG VC
–
+
W
21
3PHASE
PRE DRIVER
CH2
39
38
37
36
WO2
VMVW2
VO2
GNDUV2
35 UO2
34 VMU2
VC VG
H-BRIDGE
PRE DRIVER
CH2
22
VC VG
W
–
+
23
VC VG
V
–
+
24
VC VG
U
–
+
VC
HI-BRIDGE
CONTROL
CH2
25 26 27 28
33
32
31
VMR2
RO2
PGND2
30 FO2
29 VMF2
IC881 MM3005BNLE
ON/OFF 1
VOUT 2
SOFT
START
VOLTAGE
REFERENCE
+
–
NC 3
PWM
CONTROL
5 VOUT
4 VSS
39
MZ-RH910
IC891 AK6512CM-E2
CS 1
SO 2
WP 3
GND 4
INSTRUCTION
REGISTER
INSTRUCTION
DECODE
CONTROL
&
CLOCK
GENERATION ADD
BUFFERS
VREF
VPP
GENERATOR
VPP
SWITCH
DECODER
R/W AMPS
&
AUTO ERASE
DATA
REGISTER
STATUS
REGISTER
8 VCC
7 HOLD
EEPROM
64K bit
8192 × 8
6 SCK
5 SI
IC901 SC901584EPR2
REGC2
REG2G
REGO2
REGI2
REGC1
REGO1
REGI1
49
50
51
52
53
54
55
GND 56
VREF 57
DATA
STRB
CLK
WDT
SEQSEL
CLK
SLEEP
62
63
64
58
59
60
61
48 47
SERIAL
PASS
SERIAL
PASS
SERIAL
PASS
46
REGULATOR 3
REGULATOR 2
REGULATOR 1
45 44 43
MUTING
BUFFER
RST2
VG SELECT, VG DUTY
VREF0
CLK
CONTROL
RST1
RST2
BANDGAP
REFERENCE
REF DAC
LVB
DRIVER
VREF
42
VC2
41 40
POWER
SWITCH 2
39 38 37 36 35
STEP
UP-DOWN
DRIVER
VC2
VREF
PWM
34
RESET 2
33
RST2
REF2
32 DTC2
VREF
REF2
31 RF2
30 INM2
29 VGSEL1
28 VGSEL2
VB
VC
VREF0
RST1
START UP
VC
REF1
VREF
STEP UP
DC/DC CONVERTER
PWM
VC
VC
POWER
SWITCH 1
RST2
STEP
UP-DOWN
DRIVER
VC
REF1
VREF
27 VB
26 PGND3
25 LG
24 VG
23 C1L
22 INM1
21 RF1
20 DTC1
RST1
RESET 1
19 XRST1ADJ
18 CRST1
17 XRST1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
40
•
IC Pin Function Description
IC801 CXD2681-225GG (SYSTEM CONTROLLER, DSP)
43
44
45
46
40
41
42
37
38
39
34
35
36
31
32
33
28
29
30
25
26
27
22
23
24
18
19
20
21
15
16
17
12
13
14
9
10
11
6
7
8
Pin No.
1
2
3
4
5
VSS_3
DVDD1_10
DVSS1_10
DVDD1_11
DVSS1_11
AVDD1A
AVSS1A
AVDD1B
AVSS1B
AVDD1C
AVDD2
DVDD25SVADC
AVSS2
AVDD3
AVSS3
AVDD4A
AVSS4A
AVDD4B
AVSS4B
AVDD4C
AVSS4C
AVDD5
AVSS5
AVDD6
AVSS6
DVSS1_4
DVDD1_5
DVSS1_5
DVDD1_6
DVSS1_6
DVDD1_7
DVSS1_7
DVDD1_8
DVSS1_8
DVDD1_9
DVSS1_9
DVDD3
Pin Name
DVDD1_0
DVSS1_0
DVDD1_1
DVSS1_1
DVDD1_2
DVSS1_2
DVDD1_3
DVSS1_3
DVDD1_4
I/O
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Description
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (DSP logic system)
Ground terminal (DSP logic system)
Power supply terminal (for PLL)
Ground terminal (for PLL)
Power supply terminal (for RFA of asymmetry correction cell)
Ground terminal (for RFA of asymmetry correction cell)
Power supply terminal (for ASYO of asymmetry correction cell)
Power supply terminal (for A/D converter)
Power supply terminal (for A/D converter)
Ground terminal (for A/D converter)
Power supply terminal (for A/D converter)
Ground terminal (for A/D converter)
Power supply terminal (for PLL)
Ground terminal (for PLL)
Power supply terminal (for PLL)
Ground terminal (for PLL)
Power supply terminal (for D/A converter)
Ground terminal (for D/A converter)
Power supply terminal (for PLL)
Ground terminal (for PLL)
Power supply terminal (for A/D converter)
Ground terminal (for A/D converter)
MZ-RH910
41
MZ-RH910
70 to 72
95
96
97
92
93
94
88
89
90
91
85
86
87
98
99
100
101
102
82
83
84
79
80
81
76
77
78
73
74
75
Pin No.
47
48
49
50
51
52
53
54
55
56 to 58
Pin Name
DAVDD
DVDD25LPF
DAVSS
OSCVDD
USBOSCVDD
TSMVDD
MAIFVDD
MSJTAGVDD
USBIFVDD
VSS_0 to VSS_2
I/O
Power supply terminal (for D/A converter)
Description
Power supply terminal (for D/A converter)
Ground terminal (for D/A converter)
Power supply terminal (for 22.5792 MHz OSC)
Power supply terminal (for the USB 48 MHz OSC)
Power supply terminal (for the TSB master communication)
Power supply terminal (for MA interface)
Power supply terminal (for MS interface and JTAG)
Power supply terminal (for USB interface)
-
Power supply terminal (for 22.5792 MHz OSC, USB 48 MHz OSC, TSB master communication,
MS interface, MA interface, JTAG and USB interface)
59 to 62
IFVDD_1 to
IFVDD_4
Power supply terminal (for interface)
63, 64 IFVSS_1, IFVSS_2 Ground terminal (for interface)
65 to 69
DRAMVDD0 to
DRAMVDD4
Power supply terminal (for D-RAM/DSP interface)
DRAMVSS0 to
DRAMVSS2
EBIFVSS1
EBIFVDD2
EBIFVSS2
EBIFVDD3
EBIFVSS3
EBIFVDD4
EBIFVSS4
EBIFVDD5
EBIFVSS5
EBIFVDD6
EBIFVSS6
EBIFVDD7
EBIFVSS7
FCRAMVDD0
FCRAMVSS0
FCRAMVDD1
FCRAMVSS1
FVDD0
FVSS0
SRAMVDD0
SRAMVSS0
SRAMVDD1
SRAMVSS1
EBIFVDD0
EBIFVSS0
EBIFVDD1
ASYO
ASYI
RFI
PCO
Ground terminal (for D-RAM/DSP interface)
Power supply terminal (for D-RAM)
Ground terminal (for D-RAM)
Power supply terminal (for D-RAM)
Ground terminal (for D-RAM)
Power supply terminal (for flash memory)
Ground terminal (for flash memory)
Power supply terminal (for S-RAM)
Ground terminal (for S-RAM)
Power supply terminal (for S-RAM)
Ground terminal (for S-RAM)
Power supply terminal (for external flash memory bus interface)
Ground terminal (for external flash memory bus interface)
Power supply terminal (for external flash memory bus interface)
Ground terminal (for external flash memory bus interface)
Power supply terminal (for external flash memory bus interface)
Ground terminal (for external flash memory bus interface)
Power supply terminal (for external flash memory bus interface)
Ground terminal (for external flash memory bus interface)
Power supply terminal (for external flash memory bus interface)
Ground terminal (for external flash memory bus interface)
Power supply terminal (for external flash memory bus interface)
Ground terminal (for external flash memory bus interface)
Power supply terminal (for external flash memory bus interface)
Ground terminal (for external flash memory bus interface)
Power supply terminal (for external flash memory bus interface)
Ground terminal (for external flash memory bus interface)
O Playback EFM duplex signal output terminal
I Playback EFM comparator slice level input terminal
I
O
Playback EFM RF signal input from the RF amplifier
Phase comparison output terminal for the playback EFM system master PLL
42
MZ-RH910
140
141
142
143
144
145
134
135
136
137
138
139
146
147
148
114
115
116
117
118
119
120
121
122
123
108
109
110
111
112
113
Pin No.
103
104
105
106
107
124, 125
126
127
128
129
130
131
132
133
Pin Name
FILI
FILO
CLTV
PEAK
BOTM
ABCD
FE
VC
ADIO
ADRB
SE
TE
AUX1
ADRT
DCHG
APC
ADC1EXTC
TEMP_MON
VB_MON
CHG_MON
VREF_MON
SET_KEY_1,
SET_KEY_2
DCIN_DET
HIDC_MON
WK_DET
VBUS_MON
BATT_MINUS
_MON
RMC_KEY
RST_CONT
REC_KEY/
DOWNLOAD
RADIO_ON
HALF_LOCK_SW
XRST
PLL2EXTCI
PLL2EXTCO
PLL3EXTCI
PLL3EXTCO
DACVREFH
APCREF_DA
ADC3VREFH
ADC3EXTC
VIN
VREFL
AOUTL
AOUTR
I/O Description
I Filter input terminal for the playback EFM system master PLL
O Filter output terminal for the playback EFM system master PLL
I Internal VCO control voltage input terminal for the playback EFM system master PLL
I Peak hold signal input of the light amount signal (RF/ABCD) the RF amplifier
I Bottom hold signal input of the light amount signal (RF/ABCD) the RF amplifier
I Light amount signal (ABCD) input from the RF amplifier
I Focus error signal input from the RF amplifier
I Middle point voltage input from the RF amplifier
I Monitor output terminal of A/D converter input signal Not used
I A/D converter the lower limit voltage input terminal
I Sled error signal input from the RF amplifier
I Tracking error signal input from the RF amplifier
I Auxiliary A/D input terminal
I The upper limit voltage of A/D converter input terminal
Connecting terminal with the analog power supply of low impedance
I Error signal input terminal for the laser automatic power control
Connection terminal for an external capacitor
I Thermistor connection terminal for temperature detection
I Monitor input terminal of rechargeable battery power supply voltage (UNREG)
I Charge or discharge current monitor input from power control IC
O Reference voltage monitor input from the RF amplifier
I
I Monitor input terminal of DC input voltage for battery charge
I Monitor input terminal of High DC voltage
I
I
I
I
O
I
I
I
I
I
O
I
O
O
O
Set key input terminal (A/D input)
Detection terminal of panel key input for system wake up
Detection terminal of panel key input for camera wake up
Monitor input terminal of USB power supply voltage (VBUS)
Monitor input terminal of rechargeable battery minus terminal voltage
Reset signal output to the power control IC
REC/T MARK key input terminal
Radio on detection input terminal Not used
Top panel open switch detection terminal
System reset signal input terminal
Connection terminal for an external capacitor
Connection terminal for an external capacitor
Connection terminal for an external capacitor
Connection terminal for an external capacitor
I Reference voltage input terminal
O Reference voltage output to the RF amplifier
I Reference voltage input terminal
Connection terminal for an external capacitor (for A/D converter)
I RF signal input from the RF amplifier
I Reference voltage input terminal (for internal D/A converter L-CH) Not used
Internal D/A converter (L-CH) output terminal Not used
Internal D/A converter (R-CH) output terminal Not used
43
MZ-RH910
Pin No.
149
150
Pin Name
VREFR
DCLSOUTR
DCLSOUTL
I/O Description
I Reference voltage input terminal (for internal D/A converter R-CH) Not used
O PWM modulator signal output to the headphone amplifier (R-CH)
O PWM modulator signal output to the headphone amplifier (L-CH) 151
152
153
RTCK
ADFG
TRDR
O Not used
I ADIP duplex FM signal (21.05kHz to 23.05 kHz) input from the RF amplifier
O Tracking servo drive PWM signal output (-) to the coil driver 154
155
156
TFDR
FFDR
FRDR
O Tracking servo drive PWM signal output (+) to the coil driver
O Focus servo drive PWM signal output (+) to the coil driver
O Focus servo drive PWM signal output (-) to the coil driver 157
158
159
FS4
SFDR
SPRD
O 176.4 kHz clock signal output to the over write head driver and power control IC
O Sled servo drive PWM signal output to the motor driver
O Spindle motor drive control signal output (U) to the motor driver 160
161
162
163
SPFD
SPDV
SPDW
O Spindle servo drive PWM signal output to the motor driver
O Spindle motor drive control signal output (V) to the motor driver
O Spindle motor drive control signal output (W) to the motor driver
164
165
166
SPCU
SPCV
SPCW
SLDV
I Spindle motor drive comparison signal input (U) from the motor driver
I Spindle motor drive comparison signal input (V) from the motor driver
I Spindle motor drive comparison signal input (W) from the motor driver
O Sled motor drive control signal output (V) to the motor driver 167
168
169
SLDW
SLCU
SLCV
O Sled motor drive control signal output (W) to the motor driver
I Sled motor drive comparison signal input (U) from the motor driver
I Sled motor drive comparison signal input (V) from the motor driver 170
171
172
SLCW
SRDR
DIN
I Sled motor drive comparison signal input (W) from the motor driver
O Sled motor drive control signal output (U) to the motor driver
I Digital audio signal input terminal 173
174
175
FS256_OUT O 11.2896 MHz clock output to the RF amplifier
CHOPPERCLK O Clock signal output for chopper to the over write head driver
176 to 179 MNT0 to MNT3 O Monitor output terminal for DSP Not used
180 OFTRK I/O Tracking signal input/output for MD3
181 RECP O Laser power selection signal output to the power control IC
182
183
184
EFMO
PAUSE_KEY
PROTECT
O EFM encode data output for the recording to the over write head driver
I
I
Pause key input terminal
Recording protector for normal disc detection switch input terminal
185 OPT_DET I Optical digital input plug detection signal input terminal "H": optical in
186 XJACK_DET I Line input plug detection signal input terminal "L": plug in
187 XMIC_DET I Microphone input plug detection signal input terminal "L": plug in
188 OPEN_CLOSE_SW I Top panel open/close detection switch input terminal
189
190
191
XCS_ADC
XPD_ADC
NC
XRST_LCD
O
O
-
O
Chip select signal output to the A/D converter
Power control signal output to the A/D converter
Not used
Reset signal output to the switch unit 192
193
194
USB_WAKE
A7CAL_SW
SI0
I
I/O
I
System wake up signal output terminal by USB connection
A7 offset voltage CAL on/off control signal output terminal Not used
Serial data input from the EEPROM 195
196
197
198
SO0
SCK0
XGUM_ON
O
O
I
Serial data output to the A/D converter, EEPROM and power control IC
Serial data transfer clock signal output to the A/D converter, EEPROM and power control IC
Rechargeable battery insert detection switch input terminal
44
MZ-RH910
240
241
242
243
244
245
246
234
235
236
237
238
239
228
229
230
231
232
233
223
224
225
226
227
Pin No.
199
200
201
202
203
Pin Name
BEEP
XOPT_CTL
NC
EL_PWR_CTL
REC_LED/
ACCESS_LED
I/O
Not used
O
O
Description
O Beep sound control signal output to the headphone amplifier Not used
O Power supply on/off control signal output terminal for the optical input jack
EL power supply on/off control signal output terminal Not used
Recording indication LED and accessing indication LED drive signal output terminal Not used
204
205
206
MDVCC_CTL O Power supply control signal output terminal for the optical pick-up block
VBUS_VB_CTL O USB power supply control signal output terminal
EL_PWR_CTL O EL VDD power supply on/off control signal output terminal Not used
207 DRAM_ALONE O Power on/off control signal output terminal for internal D-RAM
208 XNV_WP_CTL
209, 210 PD_S0, PD_S1
211
212
213
D_ENREG
XMUTE
SI1
-
O
O
O
I
Write protect signal output to the EEPROM
PD IC mode selection signal output to the optical pick-up block
Internal power supply on/off control signal output to the headphone amplifier
Muting on/off control signal output terminal
Serial data input from the switch unit
SO1 O Serial data output to the switch unit 214
215
216
SCK1
SLD_MON
AOUT_SEL
O
I
O
Serial data transfer clock signal output to the switch unit
Monitor signal input terminal of sled servo
Headphone/line output selection signal output terminal Not used 217
218
219
220
SLEEP
FFCLR
NC
O
O
-
Chip enable signal output to the power control IC
Power supply on/off control signal output terminal for FCRAM (internal RAM)
Not used
221, 222
CHGI_CTL2,
CHGI_CTL3
O Charge current control signal output terminal "H": low current charge
NC
XTEST
XRF_RST
VREC_SEL
XHOLD_SW
Not used
I Input terminal for the test mode setting "L": test mode
O Reset signal output to the RF amplifier
O VREC wake up timing control signal output terminal Not used
I HOLD switch input terminal
T_MARK_SW
XRST2_DET
CHGI_SEL
RECP_MON
I T MARK switch input terminal Not used
I Reset signal input from the power control IC
O Charge/discharge control signal output for current detection amplifier to the charge control IC
I Monitor input terminal for laser power selection signal output
SPDL_MON
XCS_PWR_IC
I
O
Monitor signal input terminal of spindle servo
Chip select signal output to the power control IC
USB_CHARGE O USB charge control signal output terminal
AC_CHARGE
XCS_LCD
CC_CTL/VI_CTL
XRST_MTR_DRV
XCS_NV
CHG_PWM
IAMP_CAL
NC
D_VCONT_PWM
CHG_OPR_LED
XCS_REC_DRV
GND_SW
O AC charge control signal output terminal Not used
O Chip select signal output to the switch unit
O Constant current circuit control signal output to the charge control IC
O Reset signal output to the motor driver
O Chip select signal output to the EEPROM
O Charge current or voltage control signal output to the charge control IC
O Offset signal output for current detection amplifier charge control IC Not used
Not used
O For voltage control signal output to the headphone amplifier
O Charging indication LED drive signal output terminal
O Chip select signal output to the over write head driver
O Ground line selection signal output terminal
45
MZ-RH910
Pin No.
247
248
249
250
251
252
253
254
255
Pin Name
CS_RTC
JOG_A
JOG_B
VBUS_DET
SSB_DATA
SSB_CLK
UMD_PROTECT
LDPEN
CHG_TYPE2
I/O Description
O Chip select signal output to the real time clock Not used
I Jog dial pulse input terminal (A phase)
I Jog dial pulse input terminal (B phase)
I Detection terminal of USB power supply
I/O SSB data input/output with the RF amplifier
O SSB clock output to the RF amplifier
I Recording protector for Hi-MD disc detection switch input terminal
O Pulse/DC light-emit selection signal output to the optical pick-up block
O Charge control signal output terminal "H": charging
256
DRAM_HOLD
_DET
I Detection terminal for internal D-RAM power supply information keeping
257
258
259
260
DRAM_VDD_CLR
AD2ENDF
TEST
SRAM_MODE
O Internal D-RAM power supply latch clear signal output for quick mode sleep
I Monitor input terminal for flag of servo signal A/D measuring finish
I Input terminal for the test Not used
I Terminal for setting
261
273
274
275
276
HSALF I Terminal for setting
262 to 271 MON0 to MON9 O Trigger monitor terminal Output clock=18.5 MHz
272 XLSRCK O Pulse output for laser strobe recording to the optical pick-up
TAT
TAN
NAR
IDO
I Not used
I
I
I
Not used
Not used
Not used
277
278
279
SAK
LRCKI
XBCKI
DATAI
O
I
I
I
Not used
L/R sampling clock signal input terminal for PCM data interface Not used
Bit clock signal input terminal for the PCM data interface Not used
Serial data input terminal for the PCM data interface Not used 280
281
282
SI3
SO3
SCK3
I
O
O
Serial data input for LAM microcomputer communication Not used
Serial data output for LAM microcomputer communication Not used
Serial data transfer clock signal output for LAM microcomputer communication Not used 283
284
285
286
287, 177
289
290
SI4
SO4
SCK4
NC
HI_Z_SLD
HI_Z_SPDL
I
O
O
-
O
O
Serial data input for ATRAC3 plus encoder communication Not used
Serial data output for ATRAC3 plus encoder communication Not used
Serial data transfer clock signal output for ATRAC3 plus encoder communication Not used
Not used
Standby signal output for the sled motor to the motor driver
Standby signal output for the spindle motor to the motor driver
291 to 294
SET_CODE0 to
SET_CODE3
I Input terminal for the model setting
295, 296 D_EN1, D_EN2 O Headphone/LINE/beep selection signal output to the headphone amplifier Not used
297 D_ENVG O Power on/off control signal output terminal for headphone amplifier
298 DADT O Audio data output to the D/A converter Not used
299, 300
PWM_L1,
PWM_L2
O LC drive PWM output terminal Not used
301, 302 I2C_1, I2C_2
303, 304 JTAG0, JTAG1 I/O Terminal for setting
305 CLKIN2 I Clock signal input terminal (13.5 MHz or 27 MHz) Not used
306
307
308
FS256
ADDT
LRCK
I/O Open drain for I2C
O Master clock signal (256Fs=11.2896 MHz) output to A/D converter
I
O
Data input from A/D converter
L/R sampling clock signal (44.1kHz) output to external A/D converter
46
MZ-RH910
314
315
316
317
318
319
320
Pin No.
309
310
311
312
313
Pin Name
XBCK
OSCI
OSCO
FS512
DTCK
UDP
UDM
USBHOLD
SUSPEND
UPUEN
UOSCI
UOSCO
I/O Description
O Bit clock (2.8224 MHz) output to the external A/D converter
I Main system clock input terminal (22.5792 MHz)
O Main system clock output terminal (22.5792 MHz)
O Clock signal (512Fs=22.5792 MHz) output to the headphone amplifier
I/O TSB master data clock input/output or SSB data input/output with the remote commander
I/O USB data (+) input/output terminal
I/O USB data (-) input/output terminal
I USB hold signal input from the power control IC
O USB suspend signal output to the power control IC
O USB pull-up resistor connection control terminal
I System clock input terminal (48 MHz) (for USB oscillation circuit)
O System clock output terminal (48 MHz) (for USB oscillation circuit)
47
MZ-RH910
SECTION 7
EXPLODED VIEWS
NOTE:
• -XX and -X mean standardized parts, so they may have some difference from the original one.
• Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
↑ ↑
Parts Color Cabinet's Color
• Abbreviation
CND : Canadian model MX : Mexican model
• Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
• The mechanical parts with no reference number in the exploded views are not supplied.
• Accessories are given in the last of the electrical parts list.
7-1.
CASE (LOWER) SECTION
The components identified by mark
0 or dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 0 sont critiquens pour la sécurité.
Ne les remplacer que par une pièce portant le numéro spécifié.
panel (upper) section
6
7
chassis section
8
4
5
3
11
2
2
9
1
2
10
Ref. No.
6
7
4
5
2
3
1
2
3
Part No.
Description
2-588-293-31 KNOB (OPEN)
3-234-449-25 SCREW (M1.4) (for BLACK)
3-234-449-27 SCREW (M1.4) (for SILVER, BLUE, RED)
3-237-092-51 KNOB (HOLD) (for BLACK)
3-249-687-81 KNOB (HOLD) (for SILVER, BLUE, RED)
2-588-291-11 ORNAMENT (CASE)
2-593-171-01 SHUTTER (JACK)
2-588-274-01 TORSION SPRING (L)
3-241-529-01 SCREW, STEP
Remark Ref. No.
Part No.
8
Description
X-2055-749-1 SHEET (EMC SV) ASSY
9
9
9
9
10
11
2-588-290-31 CASE (LOWER) (BLACK)
2-588-290-41 CASE (LOWER) (SILVER)
2-588-290-51 CASE (LOWER) (BLUE)
2-588-290-61 CASE (LOWER) (RED)
X-2055-438-1 BATTERY LID ASSY (J)
2-595-602-01 ADHESIVE, ORNAMENT
2
Remark
48
MZ-RH910
7-2.
PANEL (UPPER) SECTION
51
58
60
59
64
62
63
52
52
LCD101
55
53
54
55
61
65
57
56
53
53
54
54
55
56
Ref. No.
Part No.
51
51
51
51
52
Description
X-2055-986-1 UPPER PANEL ASSY, SVX (BLACK)
X-2055-987-1 PANEL (UPER) (S) SV ASSY (SILVER)
X-2055-988-1 PANEL (UPER) (L) SV ASSY (BLUE)
X-2055-989-1 PANEL (UPER) (RED) SV ASSY (RED)
3-254-003-01 SCREW
Remark
2-582-046-01 BUTTON, CONTROL (for BLACK)
2-582-046-11 BUTTON, CONTROL (for SILVER, BLUE, RED)
2-582-047-01 ORNAMENT, JOG (for BLACK)
2-582-047-11 ORNAMENT, JOG (for SILVER, BLUE, RED)
2-582-048-01 BUTTON, FF/FR
A-1104-959-A SWITCH BOARD, COMPLETE
Ref. No.
Part No.
57
58
59
60
Description
2-630-518-01 SHEET (LCD) (EXCEPT US, CND, MX)
2-630-517-01 CUSHION (BUTTON)
2-582-045-01 LOCKER, OPEN
2-594-988-01 SHEET, INSULATION
Remark
61
62
63
64
65
2-595-607-01 SHEET, INSULATION 2
2-585-958-01 SHEET, ANTISTATIC
2-594-989-01 SHEET, SHIELDING
2-596-596-01 SHEET, UPPER (PORON)
2-582-050-01 ADHESIVE, LCD
LCD101 1-805-813-11 DISPLAY PANEL, LIQUID CRYSTAL
49
MZ-RH910
7-3.
CHASSIS SECTION
109
mechanism deck section
(MT-MZNH900-181J)
107
105
120
106
108
123
112
110
111
122
MAIN board
114
104
117
124
118
121
113
116
115
101
102
103
119
Ref. No.
Part No.
101
102
103
104
105
Description
2-595-769-01 SPRING (LOCK), TENSION
3-245-889-01 SPRING (LIMITTER), COMPRESSION
3-266-499-01 SLIDER, OPEN
3-266-506-01 CASE, BATTERY
3-254-003-01 SCREW
Remark Ref. No.
Part No.
113
114
115
Description
2-594-514-01 SPACER (IC)
2-588-273-01 TERMINAL (SUM3)
3-238-876-04 SCREW (M1.4), TOOTHED LOCK
106
107
108
109
110
2-588-272-01 COVER (SUM3)
3-266-502-01 PIN, MD STANDARD
2-588-275-01 TORSION SPRING (R)
3-246-996-01 SCREW (MD), STEP
2-024-015-01 SPACER (HP)
116
117
118
119
120
X-2059-427-1 MAIN BOARD, COMLETE (for SERVICE)
3-266-508-01 TERMINAL (-), BATTERY
X-3382-584-2 TERMINAL (+) ASSY, BATTERY
3-234-449-27 SCREW (M1.4)
X-2050-643-1 CHASSIS ASSY, SET
Remark
111
112
2-594-513-01 SPECER (COIL)
2-024-013-01 SPACER (LINE IN)
121
122
123
124
2-595-170-01 SPACER (COMPONENT)
2-630-348-01 LEAF (USB), COPPER
2-630-349-01 SHEET (REC FPC), ADHESIVE
2-631-802-01 CUSHION, BATTERY TERMINAL
50
MZ-RH910
7-4.
MECHANISM DECK SECTION
(MT-MZNH900-181J)
159
158
M702
154
161
157 not supplied HR601
(over write head)
154
M701
153
152
151
156
155
153
153
160
M703
162
163
(including HR601 (over write head) )
The components identified by mark 0 or dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant le numéro spécifié.
Ref. No.
Part No.
151
152
153
154
155
Description
3-338-645-31 WASHER (0.8-2.5)
3-263-454-01 GEAR (BSA)
3-248-370-01 SCREW, SELF TAP
3-225-996-17 SCREW (M1.4) (EG), PRECISION PAN
3-244-880-01 SPRING, THRUST RETAINER
Remark
156
157
158
159
160
3-263-455-01 GEAR (SB)
3-259-972-24 CHASSIS (REC)
X-3384-651-2 BASE ASSY, MOTOR
X-3384-650-3 HOLDER ASSY
3-263-453-01 PLATE, RATCHET
Ref. No.
Part No.
Description Remark
161
162
0 163
X-2023-272-1 LEAD SCREW SERVICE ASSY
3-244-879-01 SPRING, RACK
X-2055-677-1 OP SERVICE ASSY (ABX-UJ)
(including HR601(OVER WRITE HEAD))
M701 8-835-782-12 MOTOR, DC SSM18D/C-NP (SPINDLE)
M702 1-787-143-11 MOTOR, DC (SLED)
M703 1-477-519-21 MOTOR UNIT, DC
(OVER WRITE HEAD UP/DOWN)
51
MZ-RH910
MAIN
SECTION 8
ELECTRICAL PARTS LIST
NOTE:
• Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set.
• -XX and -X mean standardized parts, so they may have some difference from the original one.
• RESISTORS
All resistors are in ohms.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
• Abbreviation
AUS : Australian model JE : Tourist model
CND : Canadian model
EE : East European model
KR : Korean model
MX : Mexican model
HK : Hong Kong model
Ref. No.
Part No.
Description
• Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• SEMICONDUCTORS
In each case, u:
µ, for example: uA... :
µA...
uPA... :
µPA...
uPB... :
µPB...
uPC... :
µPC...
uPD... :
µPD...
• CAPACITORS uF:
µF
• COILS uH:
µH
Remark Ref. No.
Part No.
The components identified by mark
0 or dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 0 sont critiquens pour la sécurité.
Ne les remplacer que par une pièce portant le numéro spécifié.
When indicating parts by reference number, please include the board.
Description Remark
X-2059-427-1 MAIN BOARD, COMPLETE (for SERVICE)
*********************
C323 1-135-259-11 TANTALUM CHIP 10uF
C324 1-125-777-11 CERAMIC CHIP 0.1uF
20% 6.3V
10% 10V
2-024-013-01 SPACER (LINE IN)
2-024-015-01 SPACER (HP)
2-594-513-01 SPECER (COIL)
2-594-514-01 SPACER (IC)
2-595-170-01 SPACER (COMPONENT)
C325 1-125-777-11 CERAMIC CHIP 0.1uF
C327 1-125-837-11 CERAMIC CHIP 1uF
C328 1-125-837-11 CERAMIC CHIP 1uF
C351 1-125-777-11 CERAMIC CHIP 0.1uF
C352 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
10% 6.3V
10% 6.3V
10% 10V
10% 10V
2-630-348-01 LEAF (USB), COPPER
< CAPACITOR >
C101 1-164-874-11 CERAMIC CHIP 100PF
C102 1-125-837-11 CERAMIC CHIP 1uF
5% 50V
10% 6.3V
C104 1-164-939-11 CERAMIC CHIP 0.0022uF
10% 50V
C105 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
C106 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C107 1-131-862-11 TANTALUM CHIP 47uF
C108 1-135-210-11 TANTALUM CHIP 4.7uF
C153 1-125-777-11 CERAMIC CHIP 0.1uF
C154 1-135-868-11 TANTALUM CHIP 220uF
C155 1-127-715-11 CERAMIC CHIP 0.22uF
20%
20%
10%
20%
10%
4V
10V
10V
2.5V
16V
C201 1-164-874-11 CERAMIC CHIP 100PF
C202 1-125-837-11 CERAMIC CHIP 1uF
5% 50V
10% 6.3V
C204 1-164-939-11 CERAMIC CHIP 0.0022uF
10% 50V
C205 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
C206 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C207 1-131-862-11 TANTALUM CHIP 47uF
C208 1-135-210-11 TANTALUM CHIP 4.7uF
C253 1-125-777-11 CERAMIC CHIP 0.1uF
C254 1-135-868-11 TANTALUM CHIP 220uF
C255 1-127-715-11 CERAMIC CHIP 0.22uF
20%
20%
10%
20%
10%
4V
10V
10V
2.5V
16V
C303 1-125-777-11 CERAMIC CHIP 0.1uF
C310 1-135-259-11 TANTALUM CHIP 10uF
C311 1-125-777-11 CERAMIC CHIP 0.1uF
C312 1-100-539-11 TANTALUM CHIP 47uF
C313 1-100-539-11 TANTALUM CHIP 47uF
C314 1-125-777-11 CERAMIC CHIP 0.1uF
C315 1-165-851-11 TANTALUM CHIP 10uF
C316 1-119-750-11 TANTALUM CHIP 22uF
C318 1-135-149-21 TANTALUM CHIP 2.2uF
C319 1-125-777-11 CERAMIC CHIP 0.1uF
C320 1-135-149-21 TANTALUM CHIP 2.2uF
C321 1-100-539-11 TANTALUM CHIP 47uF
C322 1-125-777-11 CERAMIC CHIP 0.1uF
10%
20%
10%
20%
20%
10%
20%
10%
10V
6.3V
10V
6.3V
6.3V
10% 10V
20% 6.3V
20% 6.3V
10% 10V
10% 10V
10V
6.3V
10V
C354 1-125-837-11 CERAMIC CHIP 1uF
C355 1-128-964-11 TANTALUM CHIP 100uF
C356 1-128-964-11 TANTALUM CHIP 100uF
C360 1-125-777-11 CERAMIC CHIP 0.1uF
C361 1-119-750-11 TANTALUM CHIP 22uF
C362 1-135-259-11 TANTALUM CHIP 10uF
C364 1-125-777-11 CERAMIC CHIP 0.1uF
C365 1-125-837-11 CERAMIC CHIP 1uF
C367 1-125-837-11 CERAMIC CHIP 1uF
C370 1-100-352-11 CERAMIC CHIP 1uF
C371 1-125-777-11 CERAMIC CHIP 0.1uF
C381 1-125-777-11 CERAMIC CHIP 0.1uF
C402 1-100-609-11 TANTALUM CHIP 220uF
C403 1-100-609-11 TANTALUM CHIP 220uF
C406 1-125-777-11 CERAMIC CHIP 0.1uF
C407 1-125-777-11 CERAMIC CHIP 0.1uF
C408 1-125-777-11 CERAMIC CHIP 0.1uF
C409 1-164-943-11 CERAMIC CHIP 0.01uF
C411 1-119-751-11 TANTALUM CHIP 22uF
C412 1-125-777-11 CERAMIC CHIP 0.1uF
C415 1-125-777-11 CERAMIC CHIP 0.1uF
C419 1-125-777-11 CERAMIC CHIP 0.1uF
C420 1-125-777-11 CERAMIC CHIP 0.1uF
C421 1-125-777-11 CERAMIC CHIP 0.1uF
C424 1-128-964-11 TANTALUM CHIP 100uF
10% 10V
10% 10V
10% 10V
10% 10V
20% 6.3V
C426 1-119-751-11 TANTALUM CHIP 22uF
C452 1-107-826-11 CERAMIC CHIP 0.1uF
20% 16V
10% 16V
C453 1-165-176-11 CERAMIC CHIP 0.047uF
10% 16V
C479 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
C480 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V
C481 1-125-837-11 CERAMIC CHIP 1uF
C511 1-125-777-11 CERAMIC CHIP 0.1uF
C513 1-164-943-11 CERAMIC CHIP 0.01uF
C515 1-125-777-11 CERAMIC CHIP 0.1uF
C516 1-125-777-11 CERAMIC CHIP 0.1uF
C517 1-125-777-11 CERAMIC CHIP 0.1uF
10% 6.3V
10% 10V
10% 16V
10% 10V
10%
10%
10V
10V
10% 6.3V
20% 6.3V
20% 6.3V
10% 10V
20% 6.3V
20% 6.3V
10% 10V
10% 6.3V
10% 6.3V
20% 16V
10% 10V
10% 10V
5V
5V
10% 10V
10% 10V
10% 10V
10% 16V
20% 16V
10% 10V
52
MZ-RH910
MAIN
Ref. No.
Part No.
Description
C518 1-135-210-11 TANTALUM CHIP 4.7uF
C519 1-125-777-11 CERAMIC CHIP 0.1uF
C520 1-125-777-11 CERAMIC CHIP 0.1uF
C521 1-164-850-11 CERAMIC CHIP 10PF
Remark
20% 10V
10% 10V
10% 10V
0.5PF
50V
C522 1-164-850-11 CERAMIC CHIP 10PF
C523 1-125-777-11 CERAMIC CHIP 0.1uF
0.5PF
50V
10% 10V
C524 1-162-970-11 CERAMIC CHIP 0.01uF
10% 25V
C525 1-164-941-11 CERAMIC CHIP 0.0047uF
10% 16V
C526 1-164-874-11 CERAMIC CHIP 100PF 5% 50V
C527 1-125-777-11 CERAMIC CHIP 0.1uF
C528 1-125-777-11 CERAMIC CHIP 0.1uF
C529 1-125-777-11 CERAMIC CHIP 0.1uF
C530 1-125-837-11 CERAMIC CHIP 1uF
C531 1-164-943-11 CERAMIC CHIP 0.01uF
10%
10%
10%
10%
10%
10V
10V
10V
6.3V
16V
C533 1-164-943-11 CERAMIC CHIP 0.01uF
10% 16V
C536 1-107-819-11 CERAMIC CHIP 0.022uF
10% 16V
C537 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V
C538 1-164-941-11 CERAMIC CHIP 0.0047uF
10% 16V
C539 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V
C545 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
C547 1-119-923-11 CERAMIC CHIP 0.047uF
10% 10V
C550 1-119-923-11 CERAMIC CHIP 0.047uF
10% 10V
C552 1-164-943-11 CERAMIC CHIP 0.01uF
10% 16V
C553 1-135-210-11 TANTALUM CHIP 4.7uF
20% 10V
C554 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
C555 1-164-941-11 CERAMIC CHIP 0.0047uF
10% 16V
C556 1-135-210-11 TANTALUM CHIP 4.7uF
C557 1-125-777-11 CERAMIC CHIP 0.1uF
20%
10%
10V
10V
C558 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C559 1-164-941-11 CERAMIC CHIP 0.0047uF
10% 16V
C560 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
C564 1-135-210-11 TANTALUM CHIP 4.7uF
C565 1-125-777-11 CERAMIC CHIP 0.1uF
C566 1-125-777-11 CERAMIC CHIP 0.1uF
20%
10%
10%
10V
10V
10V
C567 1-135-210-11 TANTALUM CHIP 4.7uF
C570 1-112-014-11 TANTALUM CHIP 4.7uF
C573 1-164-933-11 CERAMIC CHIP 220PF
C601 1-125-837-11 CERAMIC CHIP 1uF
C602 1-125-777-11 CERAMIC CHIP 0.1uF
C604 1-125-777-11 CERAMIC CHIP 0.1uF
C607 1-125-837-11 CERAMIC CHIP 1uF
C609 1-125-837-11 CERAMIC CHIP 1uF
C611 1-164-943-11 CERAMIC CHIP 0.01uF
C612 1-119-750-11 TANTALUM CHIP 22uF
20% 10V
20% 6.3V
10% 50V
10% 6.3V
10% 10V
10% 10V
10% 6.3V
10% 6.3V
10% 16V
20% 6.3V
C613 1-119-750-11 TANTALUM CHIP 22uF
C614 1-119-750-11 TANTALUM CHIP 22uF
C616 1-165-897-11 TANTALUM CHIP 22uF
C619 1-125-837-11 CERAMIC CHIP 1uF
20%
20%
20%
10%
6.3V
6.3V
10V
6.3V
C620 1-119-923-11 CERAMIC CHIP 0.047uF
10% 10V
C621 1-117-919-11 TANTALUM CHIP 10uF
C622 1-100-539-11 TANTALUM CHIP 47uF
C623 1-164-933-11 CERAMIC CHIP 220PF
C625 1-125-777-11 CERAMIC CHIP 0.1uF
C627 1-100-539-11 TANTALUM CHIP 47uF
20%
20%
10%
10%
20%
6.3V
6.3V
50V
10V
6.3V
C628 1-125-837-11 CERAMIC CHIP 1uF
C630 1-125-777-11 CERAMIC CHIP 0.1uF
C633 1-164-943-11 CERAMIC CHIP 0.01uF
C634 1-125-837-11 CERAMIC CHIP 1uF
10% 6.3V
10% 10V
10% 16V
10% 6.3V
Ref. No.
Part No.
Description
C635 1-100-539-11 TANTALUM CHIP 47uF
Remark
20% 6.3V
C636 1-125-777-11 CERAMIC CHIP 0.1uF
C637 1-100-442-11 TANTALUM CHIP 10uF
C638 1-164-943-11 CERAMIC CHIP 0.01uF
C641 1-164-943-11 CERAMIC CHIP 0.01uF
10%
20%
10%
10%
10V
6.3V
16V
16V
C642 1-119-923-11 CERAMIC CHIP 0.047uF
10% 10V
C643 1-100-743-91 CERAMIC CHIP 2.2uF
20% 16V
C644 1-164-941-11 CERAMIC CHIP 0.0047uF
10% 16V
C645 1-164-943-11 CERAMIC CHIP 0.01uF
10% 16V
C646 1-119-923-11 CERAMIC CHIP 0.047uF
10% 10V
C648 1-119-923-11 CERAMIC CHIP 0.047uF
10% 10V
C650 1-100-442-11 TANTALUM CHIP 10uF
C652 1-135-259-11 TANTALUM CHIP 10uF
C653 1-135-259-11 TANTALUM CHIP 10uF
C658 1-100-539-11 TANTALUM CHIP 47uF
C662 1-165-851-11 TANTALUM CHIP 10uF
C666 1-127-820-11 CERAMIC CHIP 4.7uF
C668 1-125-837-11 CERAMIC CHIP 1uF
C669 1-125-837-11 CERAMIC CHIP 1uF
C671 1-125-777-11 CERAMIC CHIP 0.1uF
C672 1-127-820-11 CERAMIC CHIP 4.7uF
20% 6.3V
20% 6.3V
20% 6.3V
20% 6.3V
20% 6.3V
10% 16V
10% 6.3V
10% 6.3V
10% 10V
10% 16V
C673 1-125-777-11 CERAMIC CHIP 0.1uF
C675 1-164-943-11 CERAMIC CHIP 0.01uF
10% 10V
10% 16V
C677 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
C701 1-119-923-11 CERAMIC CHIP 0.047uF
10% 10V
C702 1-119-923-11 CERAMIC CHIP 0.047uF
10% 10V
C703 1-119-923-11 CERAMIC CHIP 0.047uF
10% 10V
C705 1-164-943-11 CERAMIC CHIP 0.01uF
10% 16V
C706 1-107-819-11 CERAMIC CHIP 0.022uF
10% 16V
C707 1-164-943-11 CERAMIC CHIP 0.01uF
10% 16V
C708 1-107-819-11 CERAMIC CHIP 0.022uF
10% 16V
C709 1-164-943-11 CERAMIC CHIP 0.01uF
10% 16V
C710 1-107-819-11 CERAMIC CHIP 0.022uF
10% 16V
C712 1-125-777-11 CERAMIC CHIP 0.1uF
C713 1-125-777-11 CERAMIC CHIP 0.1uF
C714 1-125-777-11 CERAMIC CHIP 0.1uF
10%
10%
10%
10V
10V
10V
C715 1-125-777-11 CERAMIC CHIP 0.1uF
C716 1-125-777-11 CERAMIC CHIP 0.1uF
C717 1-125-777-11 CERAMIC CHIP 0.1uF
C801 1-164-846-11 CERAMIC CHIP 6PF
C802 1-164-846-11 CERAMIC CHIP 6PF
10%
10%
10%
0.5PF
0.5PF
10V
10V
10V
50V
50V
C803 1-164-943-11 CERAMIC CHIP 0.01uF
C804 1-164-943-11 CERAMIC CHIP 0.01uF
C805 1-125-891-11 CERAMIC CHIP 0.47uF
C808 1-125-837-11 CERAMIC CHIP 1uF
C809 1-125-777-11 CERAMIC CHIP 0.1uF
10% 16V
10% 16V
10% 10V
10% 6.3V
10% 10V
C810 1-125-777-11 CERAMIC CHIP 0.1uF
C811 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
10% 10V
C812 1-125-837-11 CERAMIC CHIP 1uF 10% 6.3V
C813 1-119-923-11 CERAMIC CHIP 0.047uF
10% 10V
C814 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
C816 1-100-539-11 TANTALUM CHIP 47uF
C817 1-125-777-11 CERAMIC CHIP 0.1uF
C818 1-165-851-11 TANTALUM CHIP 10uF
C819 1-100-539-11 TANTALUM CHIP 47uF
C820 1-125-777-11 CERAMIC CHIP 0.1uF
C821 1-164-874-11 CERAMIC CHIP 100PF
20% 6.3V
10% 10V
20% 6.3V
20% 6.3V
10% 10V
5% 50V
53
MZ-RH910
MAIN
Ref. No.
C830
C835
C843
C845
C853
C856
C884
C885
C891
C892
C903
C906
C916
C918
Part No.
Description
C822 1-125-777-11 CERAMIC CHIP 0.1uF
C823 1-125-777-11 CERAMIC CHIP 0.1uF
C827 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
C828 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
1-164-937-11 CERAMIC CHIP
1-125-777-11 CERAMIC CHIP
C836 1-165-851-11 TANTALUM CHIP 10uF
C838 1-165-851-11 TANTALUM CHIP 10uF
C839 1-125-777-11 CERAMIC CHIP 0.1uF
1-125-777-11 CERAMIC CHIP
1-100-539-11 TANTALUM CHIP 47uF
C846 1-125-777-11 CERAMIC CHIP 0.1uF
C847 1-125-777-11 CERAMIC CHIP 0.1uF
C850 1-125-777-11 CERAMIC CHIP 0.1uF
1-125-777-11 CERAMIC CHIP
1-125-777-11 CERAMIC CHIP
C857 1-164-858-11 CERAMIC CHIP 22PF
C861 1-125-777-11 CERAMIC CHIP 0.1uF
C883 1-135-259-11 TANTALUM CHIP 10uF
1-135-259-11 TANTALUM CHIP 10uF
1-125-837-11 CERAMIC CHIP
C886 1-164-943-11 CERAMIC CHIP 0.01uF
C887 1-125-837-11 CERAMIC CHIP 1uF
C888 1-164-943-11 CERAMIC CHIP 0.01uF
1-125-777-11 CERAMIC CHIP
1-125-777-11 CERAMIC CHIP
C895 1-125-777-11 CERAMIC CHIP 0.1uF
C901 1-125-777-11 CERAMIC CHIP 0.1uF
C902 1-125-777-11 CERAMIC CHIP 0.1uF
1-164-943-11 CERAMIC CHIP
1-100-352-11 CERAMIC CHIP
C908 1-164-943-11 CERAMIC CHIP 0.01uF
C909 1-119-751-11 TANTALUM CHIP 22uF
C915 1-100-442-11 TANTALUM CHIP 10uF
1-100-442-11 TANTALUM CHIP 10uF
1-165-176-11 CERAMIC CHIP
0.001uF
0.1uF
0.1uF
0.1uF
0.1uF
1uF
0.1uF
0.1uF
0.01uF
1uF
0.047uF
C919 1-164-227-11 CERAMIC CHIP 0.022uF
10% 25V
C920 1-125-777-11 CERAMIC CHIP 0.1uF
10% 10V
C922 1-128-964-11 TANTALUM CHIP 100uF
10%
10%
10%
20%
20%
10%
10%
20%
10%
10%
10%
10%
10%
5%
10%
20%
20%
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
20%
10%
20%
20%
20%
10%
Remark Ref. No.
Part No.
10V
10% 10V
50V
10V
6.3V
6.3V
10V
10V
6.3V
10V
10V
10V
10V
10V
50V
10V
6.3V
6.3V
6.3V
16V
6.3V
16V
10V
10V
10V
10V
10V
16V
16V
16V
16V
6.3V
6.3V
16V
20% 6.3V
C3332
C3372
C4425
C4427
C4455
C4456
C4463
C4464
C4485
C6649
C6680
C8858
Description
C3304 1-164-943-11 CERAMIC CHIP 0.01uF
C3305
C3306
1-164-943-11 CERAMIC CHIP
1-164-941-11 CERAMIC CHIP
1-164-931-11 CERAMIC CHIP
1-164-937-11 CERAMIC CHIP
1-164-937-11 CERAMIC CHIP
1-164-933-11 CERAMIC CHIP
1-164-937-11 CERAMIC CHIP
1-164-937-11 CERAMIC CHIP
1-164-874-11 CERAMIC CHIP
1-125-777-11 CERAMIC CHIP
1-125-777-11 CERAMIC CHIP
1-125-777-11 CERAMIC CHIP
1-164-937-11 CERAMIC CHIP
1-164-937-11 CERAMIC CHIP
0.01uF
0.0047uF
C3308 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C3309 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C3331 1-164-931-11 CERAMIC CHIP 100PF
100PF
0.001uF
10% 50V
10%
10%
50V
50V
C3374 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C4416 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C4418 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
0.001uF
220PF
C4428 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C4429 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C4438 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
0.001uF
0.001uF
10%
10%
50V
50V
C4458 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C4459 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C4462 1-164-874-11 CERAMIC CHIP 100PF
100PF
0.1uF
C4465 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C4466 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C4467 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
0.1uF
0.1uF
10%
10%
10V
10V
C6674 1-112-010-11 CAP-CHIP 33PF 5% 100V
C6676 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C6679 1-164-866-11 CERAMIC CHIP 47PF
C8859 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C8864 1-164-935-11 CERAMIC CHIP 470PF 10% 50V
C8893 1-164-937-11 CERAMIC CHIP 0.001uF
10% 50V
C9001
C9957
1-162-970-11 CERAMIC CHIP
1-164-933-11 CERAMIC CHIP
0.001uF
0.001uF
0.01uF
220PF
10%
10% 16V
10%
10%
10%
5%
5%
10%
5%
10%
10%
10%
10%
Remark
16V
16V
50V
50V
50V
50V
10V
50V
50V
50V
25V
50V
C923 1-100-539-11 TANTALUM CHIP 47uF
C924 1-100-539-11 TANTALUM CHIP 47uF
C931 1-165-884-11 CERAMIC CHIP 2.2uF
C932 1-164-943-11 CERAMIC CHIP 0.01uF
C933 1-165-884-11 CERAMIC CHIP 2.2uF
C935 1-165-884-11 CERAMIC CHIP 2.2uF
C936 1-165-884-11 CERAMIC CHIP 2.2uF
C937 1-165-884-11 CERAMIC CHIP 2.2uF
C939 1-119-750-11 TANTALUM CHIP 22uF
C940 1-119-750-11 TANTALUM CHIP 22uF
20%
20%
10%
10%
10%
20%
6.3V
6.3V
6.3V
16V
6.3V
10% 6.3V
10% 6.3V
10% 6.3V
20% 6.3V
6.3V
< CONNECTOR >
CN451 1-818-190-21 CONNECTOR, SQUARE TYPE (USB) 7P
CN471 1-819-098-21 CONNECTOR, FFC/FPC (ZIF) 18P
CN501 1-818-547-21 CONNECTOR, FFC/FPC (ZIF) 26P
CN701 1-818-540-21 CONNECTOR, FFC/FPC (ZIF) 10P
< DIODE >
C945
C946
C948
C954
C958
1-164-939-11 CERAMIC CHIP
1-164-941-11 CERAMIC CHIP
1-119-750-11 TANTALUM CHIP 22uF
1-164-937-11 CERAMIC CHIP
1-125-837-11 CERAMIC CHIP
0.0022uF
0.0047uF
0.001uF
1uF
C959 1-125-777-11 CERAMIC CHIP 0.1uF
C961 1-125-777-11 CERAMIC CHIP 0.1uF
C3301 1-164-931-11 CERAMIC CHIP 100PF
10%
10%
20%
10%
10%
50V
16V
6.3V
50V
6.3V
10% 10V
10% 10V
10% 50V
C3302 1-164-939-11 CERAMIC CHIP 0.0022uF
10% 50V
D401 6-501-199-01 DIODE NSR0320MW2T1G
D440 6-500-483-01 DIODE MA22D2800LS0
D443 6-500-912-01 DIODE MA2SD3100LS0
D444 6-500-912-01 DIODE MA2SD3100LS0
D450 6-501-199-01 DIODE NSR0320MW2T1G
D457 6-500-483-01 DIODE MA22D2800LS0
D458 8-719-422-49 DIODE MA8056-L
D471 8-719-072-27 DIODE MA2Z748001S0
D601 6-500-813-01 DIODE MA2SD32008S0
D602 8-719-072-27 DIODE MA2Z748001S0
D604 6-500-483-01 DIODE MA22D2800LS0
54
MZ-RH910
MAIN
Ref. No.
Part No.
Description
D605 6-501-201-01 DIODE BAT54XV2T1
D606 6-500-909-01 DIODE MA22D1700LS0
D607 6-500-909-01 DIODE MA22D1700LS0
D608 6-501-201-01 DIODE BAT54XV2T1
D613 6-500-813-01 DIODE MA2SD32008S0
D614 6-500-813-01 DIODE MA2SD32008S0
D801 6-501-200-01 DIODE HRC0201ATRF-E
D803 6-500-813-01 DIODE MA2SD32008S0
D881 6-500-813-01 DIODE MA2SD32008S0
D882 6-500-813-01 DIODE MA2SD32008S0
D883 6-500-813-01 DIODE MA2SD32008S0
D884 8-719-072-27 DIODE MA2Z748001S0
D885 8-719-072-27 DIODE MA2Z748001S0
D904 6-501-200-01 DIODE HRC0201ATRF-E
D905 6-501-200-01 DIODE HRC0201ATRF-E
D906 6-501-199-01 DIODE NSR0320MW2T1G
D3305 8-719-083-91 DIODE EDZ TE61 6.8B
D3352 8-719-081-71 DIODE DF8A6.8FK (TE85R)
D3353 8-719-069-54 DIODE UDZSTE-175.1B
D4435 8-719-978-33 DIODE DTZ-TT11-6.8B
D4436 8-719-083-91 DIODE EDZ TE61 6.8B
D4441 8-719-978-33 DIODE DTZ-TT11-6.8B
D4442 8-719-083-91 DIODE EDZ TE61 6.8B
D4443 8-719-083-91 DIODE EDZ TE61 6.8B
D4456 8-719-083-91 DIODE EDZ TE61 6.8B
D6615 6-500-909-01 DIODE MA22D1700LS0
D6616 6-500-909-01 DIODE MA22D1700LS0
0 F351
< FUSE >
1-576-439-41 FUSE (0.25A/125V)
Remark
< JUMPER RESISTOR/FERRITE BEAD >
FB802 1-218-990-11 SHORT CHIP
FB807 1-218-990-11 SHORT CHIP
0
0
FB808 1-218-990-11 SHORT CHIP 0
FB1101 1-500-283-11 INDUCTOR, FERRITE BEAD
FB1102 1-400-591-22 BEAD, FERRITE (CHIP) (1608)
FB1151 1-400-180-21 INDUCTOR, EMI FERRITE (1608)
FB2201 1-500-283-11 INDUCTOR, FERRITE BEAD
FB2202 1-400-591-22 BEAD, FERRITE (CHIP) (1608)
FB2251 1-400-180-21 INDUCTOR, EMI FERRITE (1608)
FB3301 1-500-283-11 INDUCTOR, FERRITE BEAD
FB3302 1-400-591-22 BEAD, FERRITE (CHIP) (1608)
FB3351 1-400-180-21 INDUCTOR, EMI FERRITE (1608)
FB3353 1-469-179-21 INDUCTOR, FERRITE BEAD
FB3355 1-469-179-21 INDUCTOR, FERRITE BEAD
FB3357 1-469-179-21 INDUCTOR, FERRITE BEAD
FB4451 1-469-869-21 INDUCTOR (EMI FERRITE) (2012)
FB4452 1-469-869-21 INDUCTOR (EMI FERRITE) (2012)
FB5501 1-218-990-11 SHORT CHIP
FB5503 1-216-864-11 SHORT CHIP
FB8803 1-216-864-11 SHORT CHIP
0
0
0
0 FB8810 1-218-990-11 SHORT CHIP
< IC >
IC301 (Not supplied) IC AK5356VN-L
IC302 6-706-528-01 IC XC6219B212MR
The components identified by mark 0 or dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant le numéro spécifié.
Ref. No.
Part No.
Description
IC351 6-706-746-01 IC NJU8716AV (TE2)
@ IC401 6-707-717-01 IC MM1690NCBE
IC471 6-705-715-01 IC XC6219B242MR
@ IC501 6-705-012-11 IC SN761059AZQLR
@ IC601 6-705-000-01 IC SC901585VAR2
IC602 6-703-317-01 IC R1160N121B-TR-FA
IC604 6-706-079-01 IC R1180Q121C-TR-FA
IC605 6-706-214-01 IC TC7SL32FU (TE85R)
IC606 6-702-590-01 IC XC61CN1702NR
IC607 8-759-690-72 IC XC61CN0902NR
IC701 6-705-001-01 IC SC901583EPR2
@ IC801 8-753-239-65 IC CXD2681-225GG
IC804 6-704-732-01 IC PST3325UL
Remark
IC881 6-708-012-01 IC MM3005BNLE
IC882 6-706-094-01 IC R1180Q221B-TR-FA
IC891 6-702-168-01 IC AK6512CM-E2
IC901 6-704-997-01 IC SC901584EPR2
IC903 6-704-245-01 IC XC61CC1702NR
< JACK >
J301
J302
J351
J402
1-815-950-12 JACK (LINE IN (OPT))
1-794-084-12 JACK (MIC (PLUG IN POWER))
1-816-153-21 JACK (i)
1-785-383-11 JACK, DC (POLARITY UNIFIED TYPE)(DC IN 3V)
< COIL/RESISTOR >
L152 1-400-582-21 INDUCTOR
L252 1-400-582-21 INDUCTOR
L303 1-400-397-11 INDUCTOR
L502 1-400-397-11 INDUCTOR
L503 1-400-397-11 INDUCTOR
L504 1-400-397-11 INDUCTOR
L505 1-400-397-11 INDUCTOR
L506 1-400-397-11 INDUCTOR
L507 1-400-397-11 INDUCTOR
L601 1-414-398-11 INDUCTOR
L603 1-414-398-11 INDUCTOR
L605 1-456-697-21 COIL, CHOKE
L606 1-400-626-11 COIL, CHOKE
L607 1-456-697-21 COIL, CHOKE
L608 1-400-402-21 INDUCTOR
L801 1-400-397-11 INDUCTOR
L802 1-400-343-21 INDUCTOR
L803 1-216-001-00 RES-CHIP
L804 1-216-001-00 RES-CHIP
L806 1-400-342-21 INDUCTOR
L881 1-414-404-41 COIL, CHOKE
L901 1-456-710-21 COIL, CHOKE
L903 1-400-397-11 INDUCTOR
L904 1-400-397-11 INDUCTOR
L906 1-456-677-21 COIL, CHOKE
100uH
100uH
10uH
10uH
47uH
L907 1-456-677-21 COIL, CHOKE
< FILTER/COIL >
47uH
LF401 1-411-957-11 FILTER, COMMON MODE
LF4451 1-456-111-11 COIL, COMMON MODE CHOKE
10uH
22uH
10uH
22uH
4.7uH
10uH
22uH
10
10
10uH
47uH
47uH
10uH
10uH
10uH
10uH
10uH
10uH
10uH
10uH
5%
5%
1/10W
1/10W
@ Replacement of IC401, IC501, IC601 and IC801 used in this set requires a special tool.
55
MZ-RH910
MAIN
Ref. No.
Q151
Q251
Q301
Q351
Q352
Q432
Q433
Q441
Q442
Q451
Q452
Q471
Q502
Q503
Q504
Q601
Q602
Q603
Q608
Q609
Q611
Q612
Q616
Q617
Q618
Q801
Q802
Q803
Q881
Q883
Q884
Q885
Q886
Q901
Q904
Description
< TRANSISTOR >
6-550-379-01 FET
6-550-379-01 FET
8-729-051-23 TRANSISTOR
6-550-859-01 FET
6-551-127-01 TRANSISTOR
Q353 6-551-154-01 TRANSISTOR
Q401 6-551-329-01 TRANSISTOR
Q403 6-551-334-01 FET
Q406 6-551-321-01 TRANSISTOR
Q407 6-551-327-01 TRANSISTOR
Q905 8-729-030-46 TRANSISTOR
Q906 6-551-321-01 TRANSISTOR
XP4314-TX
RT3WLMM-TP-1F
< RESISTOR/FERRITE BEAD >
R101
R103
R106 1-208-911-11 METAL CHIP
R107 1-208-715-11 METAL CHIP
R151 1-218-961-11 RES-CHIP
R155
R156
R201 1-208-927-11 METAL CHIP
R203 1-208-715-11 METAL CHIP
R206 1-208-911-11 METAL CHIP
R207
R251
Part No.
6-551-328-01 TRANSISTOR
6-551-325-01 TRANSISTOR
8-729-030-46 TRANSISTOR
6-551-334-01 FET
6-550-354-01 FET
6-551-321-01 TRANSISTOR
6-551-154-01 TRANSISTOR
8-729-051-23 TRANSISTOR
6-551-325-01 TRANSISTOR
8-729-037-89 TRANSISTOR
6-550-357-01 FET
6-550-740-01 FET
6-550-859-01 FET
8-729-030-46 TRANSISTOR
6-550-859-01 FET
6-551-334-01 FET
6-551-273-01 FET
6-551-334-01 FET
6-551-321-01 TRANSISTOR
6-551-321-01 TRANSISTOR
8-729-047-68 FET
8-729-051-50 FET
6-551-325-01 TRANSISTOR
6-551-321-01 TRANSISTOR
6-551-327-01 TRANSISTOR
8-729-048-77 TRANSISTOR
6-551-334-01 FET
8-729-030-46 TRANSISTOR
6-550-818-01 FET
6-551-334-01 FET
1-208-927-11 METAL CHIP
1-208-715-11 METAL CHIP
1-218-929-11 RES-CHIP
1-218-937-11 RES-CHIP
1-208-715-11 METAL CHIP
1-218-961-11 RES-CHIP
2SK354700LS0
2SK354700LS0
2SA2018TL
NTHD4508NT1G
RT1P441U-TP-1
RT2C00M-TP
TPCP8601 (TE85L, F)
RTL035N03TR
RT3WLMM-TP-1F
RT1N144U-TP-1
TPCP8501 (TE85L, F)
2SC5383-TP-1F
XP4314-TX
RTL035N03TR
RTQ035P02TR
RT3WLMM-TP-1F
RT2C00M-TP
2SA2018TL
2SC5383-TP-1F
2SC4627J-C (TX).SO
CPH5614-TL-E
MCH6617-TL-E
NTHD4508NT1G
XP4314-TX
NTHD4508NT1G
RTL035N03TR
RTR025N03TL
RTL035N03TR
RT3WLMM-TP-1F
RT3WLMM-TP-1F
SSM3K03FE (TPL3)
XP152A12C0MR
2SC5383-TP-1F
RT3WLMM-TP-1F
RT1N144U-TP-1
XP4313- (TX).SO
RTL035N03TR
XP4314-TX
US6K1TR
RTL035N03TR
Remark Ref. No.
Part No.
Description
R255 1-218-929-11 RES-CHIP
R256 1-218-937-11 RES-CHIP
R301 1-218-953-11 RES-CHIP
R302
R303
R304
R305
R306
R307
R309
R310
1-400-807-21 BEAD, FERRITE (1005)
1-400-807-21 BEAD, FERRITE (1005)
1-218-977-11 RES-CHIP
1-218-941-11 RES-CHIP
1-218-965-11 RES-CHIP
R312 1-218-929-11 RES-CHIP
R314 1-218-990-11 SHORT CHIP
R351
R352
R353
1-218-941-11 RES-CHIP
1-218-953-11 RES-CHIP
1-218-953-11 RES-CHIP
R354 1-218-990-11 SHORT CHIP
R355 1-218-989-11 RES-CHIP
R356
R357
R358
1-218-989-11 RES-CHIP
1-218-973-11 RES-CHIP
1-208-715-11 METAL CHIP
R359 1-218-985-11 RES-CHIP
R360 1-218-977-11 RES-CHIP
R361
R362
R364
1-218-957-11 RES-CHIP
1-218-973-11 RES-CHIP
1-218-990-11 SHORT CHIP
R365 1-218-990-11 SHORT CHIP
R366 1-218-990-11 SHORT CHIP
R401
R402
R416
1-218-933-11 RES-CHIP
1-218-985-11 RES-CHIP
1-216-864-11 SHORT CHIP
R418 1-218-977-11 RES-CHIP
R419 1-218-965-11 RES-CHIP
R420
R421
R422
1-218-990-11 SHORT CHIP
1-218-990-11 SHORT CHIP
1-218-990-11 SHORT CHIP
R423 1-218-981-11 RES-CHIP
R424 1-218-985-11 RES-CHIP
R425
R426
R432
1-218-961-11 RES-CHIP
1-218-977-11 RES-CHIP
1-218-989-11 RES-CHIP
1-218-957-11 RES-CHIP
1-218-990-11 SHORT CHIP
1-245-456-21 METAL CHIP
R433 1-245-455-21 METAL CHIP
R434 1-218-989-11 RES-CHIP
10
47
1K
100K
100
10K
100
1K
1K
10
0
1M
47K
22K
0
1M
2.2K
47K
0
470K
100K
22
470K
0
0
0
0
0
0
100K
10K
4.7K
100K
1M
220K
470K
2.2K
0
1
0.47
1M
47K
22K
10K
22K
4.7K
10
47
47K
22K
10K
22K
4.7K
0.5%
0.5%
0.5%
0.5%
5%
5%
5%
0.5%
0.5%
0.5%
0.5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
R436
R437
1-218-981-11 RES-CHIP
1-218-981-11 RES-CHIP
R438 1-218-977-11 RES-CHIP
R441 1-218-990-11 SHORT CHIP
R442 1-218-977-11 RES-CHIP
R443
R455
1-218-977-11 RES-CHIP
1-218-989-11 RES-CHIP
R456 1-218-985-11 RES-CHIP
R462 1-218-981-11 RES-CHIP
R463 1-218-945-11 RES-CHIP
R464
R466
1-208-935-11 METAL CHIP
1-220-804-11 RES-CHIP
R467 1-218-965-11 RES-CHIP
R473 1-218-990-11 SHORT CHIP
R476 1-208-699-11 METAL CHIP
220K
220K
100K
0
100K
100K
1M
470K
220K
220
100K
2.2M
10K
0
4.7K
5%
5%
5%
Remark
1/16W
1/16W
1/16W
5%
5%
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
5%
5%
5%
5%
5%
5%
1/16W
1/16W
0.5% 1/16W
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1%
1%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
0.5% 1/16W
5% 1/16W
5% 1/16W
0.5% 1/16W
1/5W
1/5W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
56
Ref. No.
Part No.
Description
R477 1-208-699-11 METAL CHIP
R478 1-218-961-11 RES-CHIP
R480 1-218-977-11 RES-CHIP
R481 1-218-990-11 SHORT CHIP
R483 1-218-985-11 RES-CHIP
R484 1-218-981-11 RES-CHIP
R485 1-218-985-11 RES-CHIP
R487 1-218-990-11 SHORT CHIP
R488 1-218-981-11 RES-CHIP
R489 1-218-941-11 RES-CHIP
R490 1-218-941-11 RES-CHIP
R491 1-218-941-11 RES-CHIP
R498 1-218-990-11 SHORT CHIP
R501 1-218-957-11 RES-CHIP
R502 1-218-953-11 RES-CHIP
R505 1-218-929-11 RES-CHIP
R513 1-218-965-11 RES-CHIP
R514 1-218-973-11 RES-CHIP
R515 1-218-965-11 RES-CHIP
R516 1-218-973-11 RES-CHIP
R517 1-218-965-11 RES-CHIP
R518 1-218-973-11 RES-CHIP
R519 1-218-953-11 RES-CHIP
R520 1-218-949-11 RES-CHIP
R524 1-218-945-11 RES-CHIP
R525 1-216-864-11 SHORT CHIP
R526 1-216-864-11 SHORT CHIP
R605 1-218-953-11 RES-CHIP
R608 1-218-446-11 METAL CHIP
R612 1-220-804-11 RES-CHIP
R616 1-218-953-11 RES-CHIP
R617 1-218-953-11 RES-CHIP
R618 1-218-977-11 RES-CHIP
R619 1-218-977-11 RES-CHIP
R624 1-218-985-11 RES-CHIP
R625 1-218-985-11 RES-CHIP
R628 1-218-933-11 RES-CHIP
R629 1-220-804-11 RES-CHIP
R645 1-218-985-11 RES-CHIP
R646 1-218-973-11 RES-CHIP
R647 1-218-989-11 RES-CHIP
R648 1-245-456-21 METAL CHIP
R649 1-245-456-21 METAL CHIP
R651 1-245-456-21 METAL CHIP
R653 1-218-969-11 RES-CHIP
R654 1-218-989-11 RES-CHIP
R659 1-218-977-11 RES-CHIP
R660 1-218-985-11 RES-CHIP
R661 1-218-985-11 RES-CHIP
R662 1-218-985-11 RES-CHIP
R663 1-218-981-11 RES-CHIP
R664 1-216-789-11 METAL CHIP
R675 1-220-804-11 RES-CHIP
R678 1-218-990-11 SHORT CHIP
R679 1-218-945-11 RES-CHIP
R681 1-218-989-11 RES-CHIP
R682 1-218-989-11 RES-CHIP
1K
1K
100K
100K
470K
470K
22
2.2M
470K
47K
10K
47K
1K
470
220
0
0
1K
1
2.2M
10
10K
47K
10K
47K
100
100
0
2.2K
1K
4.7K
4.7K
100K
0
470K
220K
470K
0
220K
100
220K
2.2
2.2M
0
220
1M
1M
1
1
1M
1
22K
1M
100K
470K
470K
470K
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
1%
1%
1%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
0.5% 1/16W
5% 1/16W
5% 1/16W
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/10W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/5W
1/5W
1/5W
1/16W
1/16W
1/10W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
Remark Ref. No.
Part No.
Description
R683 1-218-989-11 RES-CHIP
R684 1-218-965-11 RES-CHIP
R685 1-218-965-11 RES-CHIP
R686 1-216-864-11 SHORT CHIP
R689 1-218-990-11 SHORT CHIP
R690 1-216-864-11 SHORT CHIP
R691 1-218-990-11 SHORT CHIP
R693 1-218-990-11 SHORT CHIP
R707 1-218-957-11 RES-CHIP
R708 1-218-957-11 RES-CHIP
R709 1-218-957-11 RES-CHIP
R710 1-218-965-11 RES-CHIP
R711 1-218-965-11 RES-CHIP
R712 1-218-965-11 RES-CHIP
R713 1-218-953-11 RES-CHIP
R801 1-218-961-11 RES-CHIP
R802 1-218-990-11 SHORT CHIP
R804 1-218-933-11 RES-CHIP
R805 1-218-933-11 RES-CHIP
R806 1-218-961-11 RES-CHIP
R807 1-218-957-11 RES-CHIP
R808 1-218-957-11 RES-CHIP
R810 1-218-990-11 SHORT CHIP
R811 1-218-965-11 RES-CHIP
R812 1-218-977-11 RES-CHIP
R813 1-218-990-11 SHORT CHIP
R814 1-218-990-11 SHORT CHIP
R815 1-218-981-11 RES-CHIP
R817 1-218-953-11 RES-CHIP
R818 1-218-957-11 RES-CHIP
R819 1-218-953-11 RES-CHIP
R820 1-218-945-11 RES-CHIP
R821 1-220-804-11 RES-CHIP
R822 1-218-989-11 RES-CHIP
R823 1-218-965-11 RES-CHIP
R827 1-218-941-11 RES-CHIP
R834 1-218-985-11 RES-CHIP
R835 1-208-943-11 METAL CHIP
R836 1-208-927-11 METAL CHIP
R837 1-218-957-11 RES-CHIP
R841 1-218-929-11 RES-CHIP
R842 1-218-973-11 RES-CHIP
R843 1-218-957-11 RES-CHIP
R854 1-208-927-11 METAL CHIP
R857 1-218-985-11 RES-CHIP
R858 1-218-929-11 RES-CHIP
R860 1-218-965-11 RES-CHIP
R861 1-218-929-11 RES-CHIP
R865 1-218-989-11 RES-CHIP
R866 1-218-989-11 RES-CHIP
R868 1-218-990-11 SHORT CHIP
R872 1-218-965-11 RES-CHIP
R873 1-218-965-11 RES-CHIP
R877 1-218-989-11 RES-CHIP
R878 1-218-937-11 RES-CHIP
R879 1-218-937-11 RES-CHIP
R880 1-218-937-11 RES-CHIP
R881 1-218-981-11 RES-CHIP
1K
2.2K
1K
220
2.2M
1M
10K
100
470K
220K
22
4.7K
2.2K
2.2K
0
0
0
10K
100K
220K
2.2K
2.2K
2.2K
10K
10K
10K
1K
4.7K
0
22
0
0
0
0
0
1M
10K
10K
1M
1M
0
10K
10K
1M
47
47
47
220K
47K
2.2K
10
47K
2.2K
47K
470K
10
10K
10
MZ-RH910
MAIN
5%
5%
5%
Remark
1/16W
1/16W
1/16W
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
5%
5%
1/16W
1/16W
5%
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
0.5% 1/16W
0.5% 1/16W
5% 1/16W
5%
5%
5%
1/16W
1/16W
1/16W
5%
5%
5%
5%
5%
5%
5%
5%
5%
0.5% 1/16W
5% 1/16W
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
57
MZ-RH910
MAIN SWITCH
Ref. No.
Part No.
Description
R882 1-218-985-11 RES-CHIP
R883 1-218-989-11 RES-CHIP
R884 1-218-985-11 RES-CHIP
R885 1-218-989-11 RES-CHIP
R886 1-218-977-11 RES-CHIP
R887 1-218-977-11 RES-CHIP
R888 1-218-981-11 RES-CHIP
R890 1-218-981-11 RES-CHIP
R892 1-218-981-11 RES-CHIP
R893 1-220-804-11 RES-CHIP
R894 1-218-977-11 RES-CHIP
R895 1-218-977-11 RES-CHIP
R897 1-218-990-11 SHORT CHIP
R898 1-208-935-11 METAL CHIP
R899 1-218-990-11 SHORT CHIP
R903 1-218-989-11 RES-CHIP
R904 1-218-989-11 RES-CHIP
R906 1-218-973-11 RES-CHIP
R907 1-218-965-11 RES-CHIP
R908 1-218-969-11 RES-CHIP
R910 1-218-969-11 RES-CHIP
R912 1-218-981-11 RES-CHIP
R914 1-208-911-11 METAL CHIP
R917 1-218-981-11 RES-CHIP
R918 1-218-985-11 RES-CHIP
R920 1-218-985-11 RES-CHIP
R922 1-218-977-11 RES-CHIP
R923 1-220-804-11 RES-CHIP
R924 1-218-985-11 RES-CHIP
R925 1-208-927-11 METAL CHIP
R926 1-208-935-11 METAL CHIP
R927 1-208-683-11 METAL CHIP
R929 1-208-935-11 METAL CHIP
R930 1-208-927-11 METAL CHIP
R933 1-208-943-11 METAL CHIP
R934 1-208-715-11 METAL CHIP
R935 1-208-935-11 METAL CHIP
R936 1-208-927-11 METAL CHIP
R937 1-208-715-11 METAL CHIP
R938 1-208-927-11 METAL CHIP
R939 1-218-977-11 RES-CHIP
R957 1-208-943-11 METAL CHIP
R960 1-218-990-11 SHORT CHIP
R961 1-220-803-81 RES-CHIP
R962 1-218-990-11 SHORT CHIP
R966 1-218-973-11 RES-CHIP
R967 1-218-985-11 RES-CHIP
R968 1-218-985-11 RES-CHIP
R969 1-218-957-11 RES-CHIP
R976 1-218-973-11 RES-CHIP
R977 1-218-977-11 RES-CHIP
R4460 1-218-990-11 SHORT CHIP
R6620 1-244-161-11 RES-CHIP
R6621 1-244-161-11 RES-CHIP
R6622 1-244-161-11 RES-CHIP
R6623 1-244-161-11 RES-CHIP
R6694 1-218-929-11 RES-CHIP
100K
1K
100K
47K
220K
22K
100K
47K
22K
47K
22K
220K
10K
220K
470K
470K
100K
2.2M
470K
47K
1M
1M
47K
10K
22K
100K
100K
0
100K
0
470K
1M
470K
1M
100K
100K
220K
220K
220K
2.2M
100K
0
2.2
2.2
2.2
2.2
10
100K
220K
0
4.7
0
47K
470K
470K
2.2K
47K
58
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
Remark Ref. No.
Part No.
1/16W
1/16W
1/16W
1/16W
1/16W
R6695 1-218-990-11 SHORT CHIP
R8813 1-218-990-11 SHORT CHIP
R8891 1-218-953-11 RES-CHIP
R8892
Description
1-218-953-11 RES-CHIP
< SWITCH >
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
S890
S891
S892
0
0
1K
1K
5%
5%
Remark
1/16W
1/16W
1-786-691-21 SWITCH, PUSH (1 KEY) (PROTECT DETECT)
1-786-692-21 SWITCH, PUSH (1 KEY)
(HI-MD PROTECT DETECT)
1-762-946-12 SWITCH, PUSH (1 KEY) (HLAF LOCK)
S893 1-762-805-21 SWITCH, PUSH (1 KEY)
* S894
(OPEN/CLOSE DETECT)
1-786-079-21 SWITCH, PUSH (1 KEY)
(BATTERY INSERT DETECT)
0.5% 1/16W
S895 1-762-078-11 SWITCH, SLIDE (HOLD)
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
0.5% 1/16W
5% 1/16W
5% 1/16W
< THERMISTOR >
THP401 1-805-580-11 THERMISTOR, POSITIVE
TH801 1-805-194-21 THERMISTOR, NTC (SMD)
< VARISTOR >
VDR8801 1-805-697-21 VARISTOR (SMD)
5%
5%
5%
5%
0.5% 1/16W
0.5% 1/16W
0.5% 1/16W
0.5% 1/16W
0.5% 1/16W
0.5% 1/16W
0.5%
0.5%
0.5%
0.5%
0.5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
0.5% 1/16W
5%
1/16W
1/16W
1/16W
< VIBRATOR >
X801 1-813-353-21 VIBRATOR, CERAMIC (48MHz)
X802 1-795-728-21 VIBRATOR, CRYSTAL (22.5792MHz)
************************************************************
A-1104-959-A SWITCH BOARD, COMPLETE
***********************
Parts on the SWITCH board cannot be exchanged. Replace the entire mounted board.
************************************************************
MISCELLANEOUS
**************
0 163 X-2055-677-1 OP SERVICE ASSY (ABX-UJ)
(including HR601(OVER WRITE HEAD))
LCD101 1-805-813-11 DISPLAY PANEL, LIQUID CRYSTAL
M701 8-835-782-12 MOTOR, DC SSM18D/C-NP (SPINDLE)
M702 1-787-143-11 MOTOR, DC (SLED)
M703 1-477-519-21 MOTOR UNIT, DC
(OVER WRITE HEAD UP/DOWN)
************************************************************
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
0
ACCESSORIES
************
1-400-877-11 FILTER, CLAMP (FERRITE CORE) (for remote control, stereo microphone, line cable)
1-569-007-12 ADAPTOR, CONVERSION 2P (JE)
1-816-206-11 CONNECTOR, LIGHT (AEP, UK, E, EE, AUS)
1-816-206-21 CONNECTOR, LIGHT (HK, KR, JE)
2-588-603-11 MANUAL, INSTRUCTION (ENGLISH)
(EXCEPT MX, KR)
1/16W
1/16W
1/16W
1/16W
1/16W
2-588-603-21 MANUAL, INSTRUCTION (FRENCH) (CND, AEP)
2-588-603-31 MANUAL, INSTRUCTION (GERMAN) (AEP)
2-588-603-41 MANUAL, INSTRUCTION (SPANISH)
(AEP, MX, JE)
2-588-603-51 MANUAL, INSTRUCTION (DUTCH) (AEP)
The components identified by mark 0 or dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant le numéro spécifié.
MZ-RH910
0 501
0 501
0 501
0 501
0 501
0 501
502
502
502
502
Ref. No.
Part No.
Description Remark
2-588-603-61 MANUAL, INSTRUCTION (SWEDISH) (AEP)
2-588-603-71 MANUAL, INSTRUCTION (ITALIAN) (AEP)
2-588-603-81 MANUAL, INSTRUCTION (PORTUGUESE)
(AEP, JE)
2-588-603-91 MANUAL, INSTRUCTION (FINNISH) (AEP)
2-588-604-11 MANUAL, INSTRUCTION (CZECH) (EE)
2-588-604-21 MANUAL, INSTRUCTION (HUNGARIAN) (EE)
2-588-604-31 MANUAL, INSTRUCTION (POLISH) (EE)
2-588-604-41 MANUAL, INSTRUCTION (SLOVAK) (EE)
2-588-604-51 MANUAL, INSTRUCTION (RUSSIAN) (EE)
2-588-604-61 MANUAL, INSTRUCTION
(TRADITIONAL CHINESE) (E, HK, JE)
2-588-604-71 MANUAL, INSTRUCTION (KOREAN) (KR, JE)
3-220-749-01 CASE, CARRYING (EXCEPT US, MX)
3-228-300-11 CASE, BELT CLIP CARRYING (MX)
X-2050-995-1 CD-ROM (APPLICATION) ASSY
(SonicStage/MD Simple Burner)
1-478-846-11 ADAPTOR, AC (AC-ES3010K2) (US, CND, MX)
1-478-847-11 ADAPTOR, AC (AC-ES3010K2) (KR)
1-478-848-11 ADAPTOR, AC (AC-ES3010K2) (AEP, E, EE)
1-478-849-11 ADAPTOR, AC (AC-ES3010K2) (UK, HK)
1-478-850-11 ADAPTOR, AC (AC-ES3010K2) (AUS)
503
503
504
505
505
506
507
508
1-478-853-12 ADAPTOR, AC (AC-ES3010K2) (JE)
1-479-321-21 REMOTE COMMANDER (RM-MC60/SM)
(for BLACK) (EXCEPT US, CND)
1-479-321-31 REMOTE COMMANDER (RM-MC60/SM)
(for SILVER) (EXCEPT US, CND)
1-479-321-41 REMOTE COMMANDER (RM-MC60/SM)
(for BLUE) (EXCEPT US, CND)
1-479-321-51 REMOTE COMMANDER (RM-MC60/SM)
(for RED) (EXCEPT US, CND)
8-912-743-90 EARPHONES MDR-E808SPB19 SET
(EXCEPT US, CND)
8-912-744-94 EARPHONES MDR-E808LPB29 SET (US, CND)
1-830-472-11 CORD, CONNECTION (USB)
1-756-306-22 BATTERY, NICKEL HYDROGEN (NH-10WM)
(EXCEPT US, CND)
1-756-306-32 BATTERY, NICKEL HYDROGEN (NH-10WM)
(US, CND)
3-008-521-01 CASE, CHARGE
1-417-577-11 CASE, BATTERY
1-400-878-11 FILTER, CLAMP (FERRITE CORE)
(for AC POWER ADAPTOR,
DEDICATED USB CABLE)
Ref. No.
Part No.
501
508
AC power adaptor
504
Dedicated USB cable
507
508
(EXCEPT E, MX, JE)
Dry battery case
Description
502
Remote control
505
NH-10WM Nickel metal hydride rechargeable batery
503
506
Earphones
Remark
Battery carrying case
The components identified by mark 0 or dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque 0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant le numéro spécifié.
59
MZ-RH910
REVISION HISTORY
Clicking the version allows you to jump to the revised page.
Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page.
Ver.
1.0
Date
2005.03
New
Description of Revision
2
Advertisement
Key Features
- Hi-MD and MD recording/playback
- Multiple audio codecs supported (ATRAC3plus, ATRAC3, ATRAC, Linear PCM, MP3)
- USB connectivity for computer file transfer
- Long battery life with various battery options
- Various input/output jacks (MIC, Line In, Optical)
- Remote control (except US/Canadian models)