null  null
O|G|TAL
V
I D
E O
_
DIGITALAUOlO
_U_ROUND
3me Theater
ER'S
Before connecting_ operating or adjusting this product.
please read this instruction booklet carefully and completely.
(_2004 Toshiba Corporation
This device does not tape-record
copy protected DVD Video Discs,
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as vases, should be placed on the apparatus.
CAUTION
CAUTION:
TO REDUCE THE RiSK
OF ELECTRIC
SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USERoSERVICEABLE
PARTS INSIDE
REFER SERVICING
TO QUALIFIED
SERVICE
PERSONNEL.
FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
REGULATORY
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNmNG: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
CAUTmON: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR EVlTER LES CHOC ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE
DE LA PRISE ET
POUSSER JUSQU'AU FOND.
WARNING: Do not install this equipment
such as a bookcase or similar unit.
in a confined space
NOTE TO CABLEfrV INSTALLER: This reminder is provided to
call the cable TV system installer's attention to Article 820-40 of
the National Electric Code (U.S.A.). The code provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of the cable entry as practical.
CAUTION:
This DVD/VCB receiver employs a Laser System.
To ensure proper use of this product, please read this owner's
manual carefully and retain for future reference. Should the
unit require maintenance, contact an authorized service
location.
Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
iNFORMATiON:
FCC Part 15
This product has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the product is
operated in a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be
determined by turning the product off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
® Reorient or relocate the receiving antenna.
® Increase the separation between the product and
receiver.
® Connect the product into an outlet on a circuit different
from that to which the receiver is connected.
® Consult the dealer or an experienced
for help.
_NOTES
radio/TV technician
ON COPYRIGHTS:
It is forbidden by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copNzLghted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
SERIAL
NUMBER:
The serial number is found on the back of
this unit. This number is unique to this unit and not available to
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
iMPORTANT
SAFETY
iNSTRUCTiONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNmNGS AND mNSTRUCTmONSmNTHIS OWNER'S MANUAL.
AND THOSE MARKED ON THE PRODUCT. RETAmNTHINSBOOKLET FOR FUTURE REFERENCE,
This product has been designed and manufactured to assure personar safety. Umproper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for instaElation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS
SERWC_NG TO QUAURED SERWCE PERSONNEL ONLY.
1. Read these instructions.
- AI! these safety and operating instructions should be read before the product is
operated.
2. Keep these instructions.
- The safety, operating and
use instructions should be retained for future reference.
VOLTAGE. REFER
10. Protect the power cord from being wamked on or
pinched
particularly
at pmugs, convenience
receptacmes, and the point where they exit from
the product.
11. Onty use attachments/accessories
the manufacturer.
specified
by
3. Heed all warnings, o All warnings on the product and
in the operating instructions should be adhered to.
4. Follow aml instructions,
o All operating
instructions should be followed.
and use
5. Do not use this product near water. - For example:
near a bath tub, wash bowl, kitchen sink, laundry tub,
in a wet basement; or near a swimming pool; and
other areas located near water.
6. Cmeanonmy with dry cloth. - Unplug this product from
the wall outlet before cleaning. Do not use liquid
cleaners.
7. Do not bmock any ventilation openings. Install in
accordance with the manufacturer's
instructions.
°
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over-heating. The openings should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been
adhered to.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus
(incmuding amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized
or grounding-type
pmug.A polarized pmug has two
b_ades with one wider than the other. A ground°
ing type pmug has two binaries and a third ground°
ing prong. The wide blade or the third prong are
provided for your safety, mfthe provided pmugdoes
not fit into your outlet, consumt an electrician for
replacement of the obsolete outlet.
12. Use onmy with the cart, stand, tripod, bracket, or
table specified by the manufacturer,
or somd with
apparatus.
When a cart is used, use caution
when moving the cart/product
combination
to
avoid injury from tip-over.
13. Unpmug this product during Hghtning storms
when unused for long periods of time.
or
14. Refer aH servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way,, such as power°suppmy cord
or pmug is damaged, liquid has been spilled or
objects have fallen into the product, the product
has been exposed to rain or moisture, does not
operate normam_y, or has been dropped.
Introduction
SafetyPrecautions
............................
iMPORTANT SAFETY INSTRUCTIONS ............
Table of Contents .............................
Before Use ................................
Playable Discs .............................
Precautions ...............................
Notes on Discs .............................
About Symbols .............................
Selecting the Viewing Source ..................
Front Panel .................................
Bispmay Window ..............................
Remote Controm ..............................
Rear Panel .................................
2
3
4
5-6
5
6
6
6
6
7
8
9
10
Preparation
Connections .............................
11-14
Connecting Antenna/Cable TV to a
DVD/VCR Receiver ........................
11
Basic TV Connections ......................
12
Optional TV Connections ....................
12
Speaker System Connections .................
13
Speaker Positioning ........................
13
Radio Antenna Connections ..................
14
Accessory Audio/Video (A/V) Connections to
DVD/VCR Receiver ........................
14
Digital Device Connections ...................
14
Semecting the mnput/Output Source ..............
15
Before Operation - Sound Mode Descriptions .....
16
Mini Glossary for Audio Stream & Surround Mode . 16
Sound Mode .............................
16
Volume Control ...........................
16
Muting ..................................
16
VCR Operation Setup ......................
17o19
On-Screen Display(OSD) ....................
17
On-Screen Menus Setup ....................
17
VCR Setup Menu Options ...................
18
Channel Selection .........................
18
Setting the Clock ..........................
19
BVB Operation Setup ......................
20-23
General Explanation ........................
20
On-Screen Display .........................
20
Initial Settings ..........................
21-23
,, General Operation ......................
21
,, Language ............................
21
,, Picture ...............................
21
,, Progressive Scan .......................
21
,, Speaker Setup .........................
22
,, Others ...............................
22
,, Parental Control ........................
23
Operation
VOR Operation ...........................
Normal Playback ..........................
Special Effect Playbacks ....................
,, Search ...............................
,, Still Picture and Frame-by-Frame Playback
,, Slow Motion ...........................
,, Variable playback speed control ............
Normal Recording .........................
Timer Recording ........................
Instant Timer Recording .....................
Dubbing and Editing ........................
Copying from DVD to VCR ...................
VHS Hi-Fi Stereo System/MTS Broadcast .......
Tape Counter Memory Feature ................
Additional Information .......................
DVD and Video CD Operation ................
Playing DVD and Video CD ..................
General Features .......................
,, Moving to another TITLE .................
,, Moving to another CHAPTER/TRACK .......
,, Slow Motion ...........................
,, Still Picture and Frame-by-Frame Playback
24-29
24
24
24
... 24
24
24
25
25-26
27
27
27
28
29
29
30-39
30
30-32
30
30
30
... 30
,, Search ...............................
31
,, Random ..............................
31
,, Repeat ...............................
31
,, Repeat A-B ...........................
31
_,3D Surround ..........................
31
,, Time Search ..........................
31
,, Zoom ................................
31
,, Marker Search .........................
32
,, Changing Video Mode ...................
32
Special DVD Features ......................
32
,, Checking the contents of
DVD Video discs: Menus .................
32
,, Title Menu ............................
32
,, Disc Menu ............................
32
,, Camera Angle .........................
32
,, Changing the Audio Language .............
32
,, Changing the Audio Channel ..............
32
,, Subtitle ..............................
32
,, Screen Saver ..........................
32
Audio CD and MP3/WMA Disc Operation .......
33-34
Playing an Audio CDs and MP3/WMA Discs ......
33
Notes on MP3 Recordings ...................
33
o Pause ...............................
34
o Moving to another Tracks .................
34
o Search ...............................
34
o Random .............................
34
o Repeat Track/All/Off ....................
34
o Repeat A-B ...........................
34
o 3D Surround ..........................
34
e Changing the Audio Channel ..............
34
JPEG File Operation .........................
35
Viewing JPEG Files on a Disc ................
35
o Selecting other Files ....................
35
o Still Picture ...........................
35
o To flip the picture .......................
35
o To rotate picture ........................
35
Notes on JPEG Files .......................
35
Programmed Playback ........................
36
Programmed Playback with Audio CDs
and MP3/WMA Discs .......................
36
Programmed Playback with Video CD ..........
36
o Repeat Programmed Tracks ..............
36
o Erasing a Track from Program List ..........
36
• Erasing the whole Program List ............
36
Speaker Setup ..............................
37
Radio Operation ..........................
38-39
Presetting the Radio Stations .................
38
Listening to the Radio ......................
38
To Clear the Stored Radio Stations .............
38
Tuning into a Station Manually ................
39
For your reference .........................
39
Tuning into a Station Automatically .............
39
Labeling Stations ..........................
39
Reference
Controlling Your TV with the Supplied Remote
Troubmeahooting ..........................
Language Code List ..........................
Country/Area Code List .......................
Specifications ............................
Limited Warranty DVD Players/Recorders ......
About the symbols
. 40-41
42°43
44
45
46-47
48-49
for instructions
Z_
Indicates hazards likely to cause harm to the unit itself
or other material damage.
_
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
Disc=related
PLayable Discs
DVD
(8 cm/12 cm disct
v, r, Eo
Video CD (VCD)
(8 cm / 12 cm disc)
Aud
oCO
(8 cm/12 cm disct
............
Unaddition, this unit can pray a DVD-R/±RW, SVCD,
Kodak PUCTURE CD and CD-R or CD-RW that contains
audio titles, MP3, WMA or JPEG files.
® Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-R/±RW) disc itself,
some CD-R/RW (or DVD-R/±RW) discs cannot be
prayed on the unit.
® Do not attach any sear or labeEto either side (the
labeled side or the recorded side) of a disc.
® Do not use irregurarly shaped CDs (e.g., heartshaped or octagonal). Utmay result in marfunctions.
_otes
on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
or other functions may be added.
Make sure to also refer to the instructions supplied with
the DVDs and Video CDs. Some DVDs made for business purposes may not be able to be played on the
unit.
Regional code of the DVD/VCR Receiver and DVDs
This DVDNCR Receiver is designed and manufactured
for playback of region "1" encoded DVD software. The region code on the labels of some
DVDs indicates which type of player can play
those discs. This unit can only play DVDs
labelled "1" or "ALL". If you try to play any
other discs, the message "Check Regional Code" will
appear on the TV screen. Some DVDs that have no
region code label may stil! be subject to area restrictions and therefore not playable.
_ote
on DTSoencoded
CDs
When playing DTS-encoded CDs, excessive noise may
be exhibited from the analog stereo output. To avoid
possible damage to the audio system, turn down the
volume before playing back such discs, adiust the volume gradually, and keep the volume level low. To enioy
DTS Digital Surround
playback, an external 5.1 channel DTS Digita! Surround
decoder system must be
connected to the digital output of the unit.
TM
TM
Terms
Title (DVD onty)
The main film content or accompanying feature content
or additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
Chapter (DVD onmy)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track (Video CD and Audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and stil! pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
A scene is composed of one or several tracks.
Types
of Video
CDs
There are two types of Video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
Video CDs not equipped with PBC (Version t.!)
Operated in the same way as audio CDs, these discs
al!ow playback of video pictures as well as sound, but
they are not equipped with PBC.
Precautions
HandJing
the unit
When shipping the unit
The originar shipping carton and packing materiaEs
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
Cleaning
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a dean cloth. Wipe the disc from the center out.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback, in this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
To keep the surface cmean
Do not use voEatib liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a !ong period of time. They will
leave marks on the surface.
Cleaning
discs
YES
NO _
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners or anti-static
spray intended for older vinyl records.
the unit
To emeanthe cabinet
Use a soft, dry cloth, if the surfaces are extremely dirty,
use a soft c!oth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
About
To obtain a clear picture
The DVD/VCR Receiver is a high-tech, precision
device. If the optics! pick-up lens and disc drive parts
are dirty or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
About
the
® symbot
display
" Q " may appear on the TV screen during operation.
This icon means the function explained in this owner's
mariu!! is not available at that moment or with that specific DVD video disc.
the disc
symbols
for instructions
A section whose title has one of the following symbols are
applicable only to those discs represented by the symbol.
DVDs.
Audio CDs.
@_
Moisture
Condensation
Never operate the DVD+VCR immediately after moving
it from a cold !ocation to a warm location. Leave it for
two or three hours without operating it. if you use the
DVD+VCR in such a situation, it may damage
discs/tapes and internal parts.
Video CDs with the PBC (playback control)
function.
Video CDs without the PBC (playback control)
function.
MP3 Discs.
WMA Discs.
JPEG Files.
Notes
HandJing
on Discs
discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Storing
Se_
the Vi_
Source
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
, mfyou want to view DVD deck output source:
Press DVD/CD until DVD indicatorin the display window lights
and output source of DVD deck is viewed on the TV screen.
, if you want to view VCR deck output source:
Press VCR until VCR indicatorin the display window lights and
output source of VCR deck is viewed on the TVscreen.
, mfyou want to Hsten to AM/FM radio broadcasts:
Press FM/AM until RADIO indicatorinthe displaywindow lights
and the frequency band appears on the TV screen.
discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature
increase inside the car.
_otee
, if you insert a disc while the DVD/VCR Receiver is in
DVD mode automatically.
, if you insert a cassette tape without an erasure prevention tab intact while the DVD/VCR Receiver is in
the DVD mode, the DVD/VCR Receiver will switch to
VCR mode automatically.
i
i
EJECT
Ejects the tape in the VCR deck.
POWER
Switches the DVD/VCR Receiver ON and OFE
VOLUME
Adiusts volume of speakers.
WDEO / AUDIO (Left/Right) input
Connect the audio/video output of an
externar source (Audio system, TW Monitor,
another VCR).
_'_ (PLAY)
To play back a recorded
tape or disc.
Disc Tray (DVD deck)
Insert a disc here.
TUNING (mJ_')
Selects FM and AM band.
COPY/MEMORY
Press to copy a DVD in the DVD deck to a VHS tape in
the VCR deck.
Memorizes currently tuned Radio frequency (station).
OPEN/CLOSE
Opens or closes the disc tray.
Cassette
Compartment
(VCR deck) _
insert a video cassette here.
,
[
v ,!
!1
B
,-
I ......
_
Y
_ .....
i
RADI
I
O I
Selects Radio operation I
mode. I
CN/PRESET (_/_)
Scans up or down through
memorized channels or radio
frequencies (stations).
Remote Sensor
Point the DVD/VCR Receiver remote
control here.
Display window
Shows the current status of the
DVDNCR Receiver.
I
;
j
VOIJME
DVD/VCR
Togg es contro between
the DVD deck and the
VCR deck.
REC
To record normally or to activate
Instant Timer Recording.
tl (PAUSFJSTEP)
Pause playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
t (STOP)
Stops playback of a disc or tape.
_/_
DVD: Go to beginning of current chapter/track or Press two times in quick successions to go
to previous chapter/track. Press and hold for a fast reverse search.
VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.
DVD: Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search.
VCR: Advances the tape during the STOP mode or for fast forward picture search.
i
i
A cassette is in the VCR deck.
Undicates encoding format of the current disc.
RADIO
Indicates RADUO mode is active
MUTE
The speaker sound is muted.
Indicates sound mode is
DOLBY PROLOGUC or DOLBY PROLOGUCH.
SAP Undicates when a SAP BUUNGUAL
broadcast is being received.
HFR Indicates the unit is praying
back a tape recorded in Hi-Fi.
REC
DVD/VCR Receiver is Recording.
COPY
DVD to VCR copy
is in progress.
TIMFR DVD/VCR
Receiver is in timer
recording or a timer
recording is programmed.
Lights when a disc
is in the DVD deck
PROG Undicates
when programmed
playback is in
progress.
IDi3DiGITAL_'_l)UriPRoLoGiii iiPROGi;ii;LECHP;i;RK
_
_
B
_
_
o-o]
iP?!:_i:.?
_:::.::::.:.:._
ii.:i:!_
...............
i!:;:!::
...............
...............
...............
ii,:i:!::
.....................
il
LPiSCAN
ST .!!PT!
!L£
A/tB
................
Indicates c!ock, total playing time, elapsed time, remaining time, title
number, chapter/track number, channel, radio frequency, level, volume,
channel or current deck status (Playback, Pause, Mode, etc).
Lights when TV mode is active.
The VCR deck is selected.
Indicates repeat mode
DVD DVD inserted.
PHOTO Photo disc inserted.
VCD Video CD inserted.
MP3 MP3 disc inserted.
ST Indicates a stereo broadcast is being received.
Indicates when the Progressive scan playback is in progress.
TV POWER,
Switches TV ON and OFR
POWER
Switches DVD/VCR
OFF.
iNPUT o
= Selects the VCR deck's source
(Tuner, LINE 1, or LINE 2).
- Selects the TV external source.
AUX ®
To listen to an audio source connected \
to the DIGITAL AUDIO IN (OPTICAL) \
jack with video from LINE 1.
SOUND MODE o
Selects sound mode between BYPASS,
PRO LOGIC, PRO LOGICII (MOVIE,
MUSIC, MATRIX) and 3D SURROUND.
o TV
To control multi-brand TV.
o DVD/CD
To control DVD/CD operating.
o VCR
IINPUT
TV
POWER
POWER
AUX
SOUND
MODE
To control VCR operating.
o FMIAM
Selects the DVDNCR Receiver's tuner
as the listening choice (FM and AM
bands).
EJECl
OPEN/CLOSE,
EJECT (_) e
Opens and closes the disc tray.
Ejects the tape in the VCR deck.
7
TOP
DISC MENU
Accesses menu on a DVD disc.
available..______
SUBTITLE
o
MARKER
©
I UNING
SEA_{CH
RETURN
Removes the Setup menu.
oVOLUME
SEARCH
Displays MARKER
PAUSE/STEP
•
Pause playback or recording
temporarily/press
repeatedly for
Advances the tape during the STOP
mode or for fast forward picture search.
SKiP I_
•
Skip to beginning of current chapter or
track, press twice in quick successions
to go to previous chapter or track.
SKiP _,4 •
Skip to next chapter or track.
REC/ITR (0) o
Records normally or activates Instant
Timer Recording.
REPEAT A-B, SP/SLP o
= Repeats sequence.
= Selects recording speed.
REPEAT o
Repeat chapter, track, title, all.
RANDOM
o
Plays tracks in random order.
REW
REC/ITR
STOP
PAUSE/STEP PLAY
WD
REPEATA-B
SP/SLP
SEARCH rnenu.
VOLUME
(A/_)
Adjusts volume of speaker.
Adjusts volume of TV.
ICIffTRK
SLOW
Rewinds the
tape during the
STOPo _l
frame-by-frame
playbaCk.PLAY
mode or for fast reverse picture search.
FWD o
TUNING
(A/T)
To tune in the desired station.
MARKER
Marks any point during playback.
OCH/IRK
STOP •
Stops playback.
Starts playback.
REW o
MENU
Displays the disc's Title menu, if
available.
Selects a DVD camera angle if
Selects a subtitle language.
AUDIO •
Selects an audio language (DVD) or an
audio channel (CD).
SLOW o
Forward slow playback of tape.
PROGRAM
Accesses or removes Program menu.
COUNT RESET, CLEAR
- Resets tape counter to 0:00:00
- Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
0°9 numericam buttons
Selects numbered options in a menu.
ZOOM _
Enlarges DVD/VCD video image. _.
ANGLE o
Receiver ON and
SKIP
REPEAT
DISPLAY, CLK!CNT
Accesses On-Screen display.
Switches among the clock, tape counter
and tape remaining modes on the display.
RANDOM
4/b,,/&/'_' (left/right/up/down)
Selects an option in the menu.
CHiTRK (A/_'): Selects VCR channels.
Selects TV channels. Manually adjusts
the tape's picture onscreen.
TV/VCR
TO view channels selected by the VCR
tuner or by the TV tuner.
ENTER, MEMORY
Acknowledges menu selection.
Displays functions on the TV screen.
SETUP, MENU
Accesses or removes DVD Setup menu
and VCR menu.
MUTE
Turns off sound from speaker
connectors.
_ote
This remote control uses the same buttons for
VCR and DVD functions (ex. PLAY).
To use the VCR, first press the VCR button.
To use the DVD, first press the DVD/CD button.
VCRINLINE
1 (VIDEO IN/AUDIO IN (Left/Right})
Connect the audio/video output of an external
source (Audio system, TV/Monitor, Another VCR).
DVD/VCR OUT (VIDEO/AUDiO (Left/Right})
Connect to a TV with video and audio inputs.
COMPONENT/PROGRESSIVE
SCAN VIDEO OUT
(Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs. FOR DVD
VIEWING ONLY.
ANT.IN
Con nect the VH F/U H F/CATV
antenna to this terminal.
Plug into the power source.
\
i AC Power Cord
®®®o
..........
T..........
RF.OUT (DVD/VCR OUT)
Connect to a TV with RF coaxial inputs.
S-WDEO OUT (DVD OUT)
Connect to a S-Video input on TV. FOR DVD ViEWiNG ONLY.
SPEAKER Connectors
Connect the six supplied speakers to these terminals.
DIGITAL AUDIO IN (OPTICAL)
Connect to a digital audio output on a digital device.
AM Antenna Connectors
Connect the AM antenna to this terminal.
FM Antenna Connector_
Connect the FM antenna to this terminal.
Do not touch the inner pins of the jacks on the rear panel
EBectrostatic discharge may cause permanent damage to the unit.
Remote
Control
Operation
Range
Point the remote control at the remote sensor and press
the buttons.
® Distance: About 7m (23ft) from the front of the
remote sensor
® Angle: About 30 ° in each direction of the front of the
remote sensor
Remote control
_L/
battery
installation
the remote control, and insert two R03
(size AAA)
with ©
•
Detach
the batteries
battery cover
on and
the rear
of
aligned correctly.
ZLcaution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DISPOSED OF IN A SAFE MANNER IN COMPLIANCE
WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AUTHORITY.
Without
® Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
DVD/VCR Receiver. Use connections described on pages
1t-14.
® Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the best
connections.
With
Z_Oaution
® Make sure the DVD/VCR Receiver is connected directly to
the TV. Tune the TV to the correct video input channel.
® Do not connect the DVD/VCR Receiver's DVD/VCR AUDIO
OUT jack to the phone in jack (record deck) of your audio
system.
® Do not connect your DVD/VCR Receiver via your VCR. The
DVD image could be distorted by the copy protection system.
Connecting
Antenna/Cable
DVD/VCR Receiver
_
isconnect
TV.
the antenna
leads
from
TV to
the rear of the
Udentify the type of cable from your antenna. Ufit is
a round cable as irlustrated, it is a 75 ohm coaxiar
antenna cable. This cabre wirl connect directly to
the iack marked AN_UN on your DVD/VCR
Receiver.
Cabme Box
If your cable wire is connected to your TV without a converter
or descrambler box, unscrew the wire from your TV and attach
it to the ANT.IN jack on the DVD/VCR Receiver. Use the supplied round coaxial cable to connect between the DVD/VCR
Receiver's RROUT jack and the 75 ohm antenna input jack on
the TV. With this connection, you can receive all midband,
super band, and hyperband channels.
Cable
Box
If a converter is required in your cable system, follow the
instruction below:
The cable hookup permits both TV and DVD/VCR
operation.
To view or record a CATV channel
1 Tune the TV to the DVDNCR Receiver output channel (CH
3 or 4).
2 Set the DVDNCR Receiver channel selector to the output
channel of the Cable Converter box using CH/TRK (A/T) or
number (0-9) of your DVD/VCR Receiver. (Example: CH3)
3 Select the channel to view at the Cable Converter Box.
® With this connection, you CANNOT record one program
while viewing another.
® If you are using a cable box to tune channels, it is not necessary to do Auto Channel Programming, (Auto Channel
Search) as indicated on page 18.
Cable TV
Wall Jack
Ufyour antenna lead wire is a fiat type antenna cable,
connect it to an Antenna Adaptor (300-ohm to 75-ohm)
(not supplied) and srip the Adaptor onto the ANTJN
iack. The Adaptor does not screw on to the DVD/VCR
Receiver, it iust slips over the iack.
Antenna
X
Antenna
Wall Jack
Cable TV
....
®®®o
Flat Wire
(300 ohm)
300/75 ohm _
OR
Adaptor
(Not supplied)
.....
vc_ IN
DVDNCF
OR
Rear of DVD/VCR Receiver
_
m_F"sr, sc_
®®®o
®®®=
......
Rear of DVD/VCR Receiver
Receiver
Basic TV Connections
Make one of the following connections,
the capabilities of your TV.
RF coaxial
tional
depending on
DVD playback can also be done using the S-VIDEO OUT
and COMPONENT/PROGRESSWE
SCAN VIDEO OUT
connection
Connect the RROUT jack on the DVD/VCR Receiver to
the antenna in jack on the TV using the 75-ohm Coaxial
CabLe supplied (R).
connection options below. The tuner and VCR ONLY
output through the RROUT (R) or DVD/VCR OUT (A,
V) jack. (See left)
S=Video
if you use this connection, tune the TV to the
DVD/VCR Receiver's RF output channel (CH 3 or 4).
How to set the DVD/VCR Receiver's
ne_
RF output
When the DVD/VCR Receiver is turned off,
hoed CH/PRESET (A/T) on the front panel
seconds to change the RF output channel
CH 04). "RF-03" or "RF-04" appears in the
dow.
Audio/Video
_
TV Connections
_
chart°
Connection
onnect the S-VIDEO OUT iack on the DVD/VCR
Receiver to the S-Video in iack on the TV using the
S-Video cable (S).
Connect the Left and Right AUDIO OUT iacks on
the DVD/VCR Receiver to the audio left/right in
iacks on the TV using the supplied audio cables
(A).
press and
for about five
(CH 03 or
display win-
Component
_
connection
onnect theReceiver
DVD/VCR
VUDEO
iackononthe
theTV
DVD/VCR
to the
videoOUT
in jack
using the supplied video cable (V).
Connect the Left and Right DVD/VCR AUDUO OUT
jacks on the DVD/VCR Receiver to the audio
left/right in jacks on the TV (A} using the supplied
audio cables.
set the TV's source selector
Rear of TV
(CoJor
Stream
_'} connection
onnect OUT
the COMPONENT/PROGRESSWE
VIDEO
iacks on the DVD/VCR Receiver SCAN
to the
corresponding in jacks on the TV using Y Pb Pr
cables (C}.
jacks on the TV (A) using the supplied audio
cables.
Progressive
If you use this connection,
to VIDEO.
Video
Scan (ColorStream
'_ pro) connection
® If your television is a high-definition or "digital ready"
television, you may take advantage of the DVD/VCR
Receiver's progressive scan output for the highest
video resolution possible.
® If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD/VCR Receiver.
_
Connect
the COMPONENT/PROGRESSWE
VIDEO OUT
iacks on the DVD/VCR Receiver SCAN
to the
corresponding in iacks on the TV using Y Pb Pr
cable (C).
Connect the Left and Right AUDIO OUT iacks of
the DVD/VCR Receiver to the audio left/right in
iacks on the TV (A) using the supplied audio
cables.
_otes
o Set the Progressive Scan to "On" on the DVD setup
menu for progressive signal, see page 21.
/
Rear of DVD/VCR Receiver
f
® Progressive scan does not work with the ana!og video
connections (yellow VIDEO OUT and S-VIDEO OUT
jack).
Speaker
System
Connections
Connect the speakers using the supplied speaker cords
by matching the colors of the terminals and those of the
cords. To obtain the best possibb surround sound,
adiust the speaker parameters (distance, level, etc.).
For a normal setup use 6 speakers (2 front speakers,
center speaker, 2 rear speakers and subwoofer).
,, Be sure to match
• Center Speaker
It is idea! that the center speakers and front speakers
are same height. But normally place it above or below
the television as shown below.
the speaker
cord to the appropriate
terminal on the components:
_} to _} and Q to G. if
the cords are reversed, the sound will be distorted
and Eack bass.
e if you use front speakers
with low maximum
input rating, adiust the vorume carefully to avoid excessive
volume
output
to the speakers.
e Do not disassemble
the front covers of supplied speakers.
Front Speaker
(Right}
Center
Speaker
e
Front Speaker
(Left)
e
• Front Speakers
Based on your listening position, set up the speakers
at equal distance. And by hearing position, set up an
interval between speakers of 45 degree.
• Rear Speakers
Place the rear surround speakers to the left and right
behind the primary listening area. These speakers
recreate sound motion and atmosphere required for
surround playback. For best results, do not install the
rear speakers too far behind the listening position,
install them at or above the level of the listener's ears.
It is also effective to direct the rear speakers towards
a wall or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is
near to the rear wall set the rear speakers opposite
each other, and set the rear speakers 60 - 90 cm
above the listener's ears.
• Sabwoofer
This can be placed in any front position.
Subwoofer
Center Speaker
Front
Front
Speaker
(Right)
Speaker
Rear
Speaker
(Right)
Rear
Speaker
(Left)
Rear speaker
(Right surround)
Subwoofer
About
Ferrite Core
Be sure to attach
2
the ferrite
core to
the speaker cables (for connecting
to
this unit).
This ferrite core can reduce noises.
How
3
Rear speaker
(Left surround)
to attach
the ferrite
core,
1 Push the stopper [a] of the ferrite core
to open.
2 Wind the Center and Subwoofer Speaker
cables once on the ferrite core.
Pass the others straight on the ferrite core.
3 Close the ferrite core until it clicks.
Speaker
Positioning
Examp{e
Radio Antenna
Connections
Connect the supplied FM/AM antennas for radio listening.
_
onnect
the AM loop antenna to the AM antenna
con
nectors.
D_ital
Device
Connections
Connect the DUGFAL AUDUO UN(OPTUCAL) jacks on
the DVD/VCR Receiver to the digital audio out (opticar)
jacks on your digitaE device (Game device, DigitaE Set
Top Box, etc.), using optionar opticar audio cable.
To select source of DVD/VCR Receiver to OPTUCAL UN,
press AUX on the remote control.
Connect
the FM wire antenna to the FM antenna
con nectors.
_otes
_otes
,, To prevent noise pickup, keep the AM roop antenna
away from the DVD/VCR Receiver and other components.
,, Be sure to furly extend the FM wire antenna.
e After connecting the FM wire antenna, keep it as horizontal as possible.
o If the audio format of the digita! output does not
match the capabilities of your DVD/VCR Receiver, the
DVD/VCR Receiver will produce a strong, distorted
sound or no sound at al!.
o The Optica! input function is available only when the
other unit's Sampling Frequency is 32 - 48kHz.
Game Device
Digital Set Top Box
....
°"1
OR
Rear of DVD/VCR Receiver
Audio/Video
(A/V)
Connections
to DVD/VCR
Receiver
Connect the VCR IN MNE1 or MNE2 jacks on the
DVD/VCR Receiver to the audio/video out iacks on your
accessory component, using optional audio/video
cables.
Jack Panel of Accessory Component
(VCR, Camcorder, etc.)
OR
Rearef DVD/VCRReceiver
FrontofDVD/VCRReceiver
Rear of DVD/VCR Receiver
AUX
DVDiCD
VCR
FM/AM
Follow these guidelines to select and switch among the
various DVD/VCR Receiver input and output sources:
• DVD/CD
To view output from the DVD deck:
Press DVD/CD on the remote or DVD/VCR on the
front panel unti! the DVD indicator on the front panel
lights and output from the DVD deck is viewed on the
TV screen.
• VCR
e[NPUT
iNPUT
C2
MODE
EJECT
CBC
[_
SOUND
OPEN,eL OSF
To view output from the VCR deck:
Press VCR on the remote or DVD/VCR on the front
panel until the VCR indicator on the front panel lights
and output from the VCR deck is viewed on the TV
screen.
• FM/AM
(DC3
_
RETURN
ANGLE
SUB
TITLE
DISC MENLJ
Press FMiAM on the remote to toggle between AM
and FM radio. The selected frequency appears on
the front panel display.
MARKER
©
TUNING
SEARCH
AUX
eVOLUME
DIS play
SET
0
To listen to AM/FM radio broadcasts:
AUDIO
UP
.o.,Tr,
K 0
To Hsten to an audio source connected to the
DiGiTAL AUDIO iN (OPTICAL) jack with video
from LiNE 1:
Press AUX on the remote control once. L1 OPT will
CLK/CNT___MENU
TV/VCR
SLOW
@
MUTE
STOP
PAUSESTEP
PLA)
SKIP
REC/ITR
REPEATA=B
REPEAT
RANDOM
@3EZI C:]
appear on the front panel display. Audio wil! come
from an external source connected to the DIGITAL
AUDIO IN (OPTICAL) iack and video will come from
an external source connected to the VIDEO IN iack
of LINE 1 (for rear panel).
To listen to an audio source connected to the
AUDIO iN jack of LINE1 with video from LiNE 1 :
Press AUX on the remote control a second time.
L1 will appear on the front panel display. Audio will
come from an external source connected to the
AUDIO IN iacks of LINE1 (for rear panel) and video
wi![ come from an external source connected to the
VIDEO IN jack of LINE 1 (for rear panel).
iNPUT
To view a source connected
LiNE inputs:
to the front or rear
First, press VCR to select the VCR deck, and then
press INPUT to select LINE1 (L1) (for rear panel) or
LINE2 (L2) (for front panel).
BYPASS
Surround
Software with multichannel surround audio signals is played
according to the way it was recorded.
mode
Sound
(DTS)
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
means identical to the original masters) and results in exceptional clarity throughout a true 360 degree sound field. The
term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
DDDIGITAL(Domby
Digital)
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital program source. If you play DVDs with " Rq_
" mark, you can
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
DDPROLOGIC
(Domby Pro
Logic)
Use this mode when playing movie or Dolby Digital 2 channel
which carries the " _
" mark. This mode provides the effect
of being in a movie theater or live concert house-an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND.
The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynamic than before.
Pro Logic
from two-channel
II creates
sources.
five full-bandwidth
This
is done
using
output
surround
of the pre-programmed
program
you want
sound
sound
to listen
simply
fields
by selecting
according
one
to the
to.
Press SOUND MODE repeatedly
unti! the sound mode
you want appears in the display window as below.
Each
time you press
mode
is changed
SOUND
MODE
in the following
button,
the sound
order;
BYPASS _ PRO LOGIC -_ MOVIE -_ MUSIC -_ MATRIX -_
3D SURR
When DVD is inserted.
You can change the sound mode of DVD (Dolby Digital, DTS,
PCM, etc) by pressing the AUDIO button on the remote
during playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.
Each time you press AUDIO button, the sound mode of DVD is
changed as the following order;
DDDIGITAL-_ _
-_ PCM
_ DDDIGITAL
_ote
channels
an advanced,
high-purity
matrix surround
decoder
that extracts the spatial
properties
of the original recording
without adding any new
sounds or tonal colorations.
MOVIE mode:
The Movie mode is for use with stereo
"You can enioy
Depending on discs format, you may not be able to change the
sound mode.
D[]PRO
LOGICII (DoBby Pro Logic If)
Dolby
Mode
television
shows
and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality
that approaches
the quality of discrete
5.1-channel
sound.
MUSmC mode:
The Music mode is for use with any stereo music recordings,
and
provides a wide and deep sound space. The Music mode
includes controls that allow the sound to be tailored to individual
For your reference
, The DVD/VCR Receiver memorizes the mastmode
settings for each source individuam_y,
• You can identify the encoding format of program
software by mooking at its packaging.
- Dolby Digital discs are labelled with the up_
logo.
- Dolby Surround encoded programs are labelled with
the _
logo.
- DTS Digital Surround discs are marked with DTS.
listening
tastes.
_ote
MATRIX
mode:
When you play sound tracks with 96kHz sampling frequency,
the output signals will be converted to 48kHz (sampling
frequency).
The Matrix mode is the same as the Music mode except that the
directional enhancement
logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The Matrix
mode may also find use in auto systems, where the fluctuations
from poor FM stereo reception can otherwise cause disturbing
surround signals from a logic decoder. The ultimate "cure" for
pOOr FM stereo reception may be simply to force the audio to
mono.
Vobume Controm
"You can adiust the volume by rotating VOLUME on the
front panel or by pressing VOLUME (A/T) on the
remote control repeatedly.
3D SURROUND
This unit can produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five
or more speakers normally required to listen to multi-channel
audio from a home theater. This feature works with DVD discs
encoded with Dolby Pro Logic and Dolby Digital audio tracks.
Press MUTE to mute your unit.
"You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator in the display window.
To exit mute mode, press MUTE again.
On-Screen
Display
(OSD)
Set the Output Source to VCR as shown in "Selecting
the Unput/Output Source" on page 15.
Some of these functions appear during VCR operated.
@
@TAPE
@
SPEED
_
@
@
DISPLAY
Shows the current tape speed.
@ FUNCTION
D_SPLAY
Indicates the current function.
_HFF_
DISPLAY
EASY
INFORMATION
If the Extended Data Service (XDS) signals are provided
along with normal TV signal in your area or during playback of a tape recorded with Extended Data Service
(XDS) signals, the station ID, program title, and program
details are shown on the TV screen.
When viewing a channel with Extended Data Service (XDS)
signals, press ENTER and the station ID will appear on the
TV screen. Press ENTER again and the program details will
appear on the TV screen.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER twice and the program title and program details will appear on the TV
screen.
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
T_ME REMAiNiNG: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
Indicates the unit is playing back tape recorded in Hi-Fi.
@ CHANNEL
DISPLAY
SP
CH 4
STEREO
WABC
PROGRAM DETAILS
"Home video"
Indicates the selected channel (or LINE1 (L1), LINE2(L2)).
@STEREO/SAP
DISPLAY
"Home video"
OCT 8, FRJ
Shows the type of audio signal received by the VCR tuner.
@ DATE DISPLAY
Shows the current date. (Month/Date/Day
format)
@ CLOCKJCOUNT/REMAIN
of the week
DISPLAY
Shows the current time, the tape counter and remaining time
on the tape.
Each press of the ENTER changes the TV
on-screen displays in the following sequence.
STOP
SP
LENGTH
T_ME REMAINING
RATtNG
(MONO is not displayed)
OH 4
STEREO
2:15 PM
Easy hformation
Screen
(Station ID)
On-Screen
01:00
00:26
N/A
Easy mnformation Screen
(Program details)
Menus Setup
The SETUP, clock setting (CLOCK), and timer
recordings (PROGRAM) are accessed conveniently with
the on-screen menus, that lead you through each step.
The fol!owing pages describe the on-screen menu
selections available.
Menu Selection
OCT
8 , FRI
"Your VCR allows remote control adjustment of several
featu res.
2:15 PM
_
l
2:15 PM
_otes
2
Press MENU and the MAiN menu will appear.
emect
the desired
then
press
ENTER. menu with ,&/_' button and
Menus remain on-screen for 3 minutes.
® The function displays remain on the TV screen for 5
seconds.
® The clock (or tape counter, tape remaining) mode will remain
on the screen until you press ENTER.
® The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
MAIN
]
i _
MENU
_- CLOCK SET (page t9)
L0CK
]
PROGRAM
]
TUNING
]
SETUP-
PROGRAM
--
:_
E _c:r_r_r_ _:_
Press MENU when finished.
(page 25)
TUNING (page t8)
SETUP (page 18)
Setup
VCR
Press
Channel
Menu Options
MENU
end
the
MAiN
menu
will appear.
This DVD/VCR
frequency
Use
_
ENTER,
to eemect the
The SETUP
menu
SETUP
menu,
then
press
will appear.
Selection
Receiver
synthesized
is equipped
tuner
capable
with a
of receiving
181 channels.
These include VHF channels
channels
14-69 and CATV channels
1-125.
2-13,
up to
UHF
Preparation:
Connect the DVD/VCR Receiver to the desired type of antenna
or cable TV system, as shown in Connecting Antenna/Cable
TV to DVD/VCR Receiver on page ti.
AUTO
_
Use _
to choose a desired option on the
SETUP menu. Then use _/_ to choose a
desired setting.
CHANNEL
PROGRAMMING
Press MENU and the MAiN menu wim_appear.
Use _
to eemect the TUNING menu, then press
ENTER.
The TUNING menu will appear.
FUNCTION
OSD
The on-screen display of this DVD/VCR Receiver can be turned
on or off.
® FUNCTION OSD can be switched between ON and OFF
using .,q/_.
AUDIO MODE
The DVDNCR Receiver has two separate audio playback systems, the high quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is generally recorded on
both systems. The VHS Hi-Fi system plays on separate (left
and right) channels, and the NORMAL system plays monaural
sound. The normal track is always played so the cassette can
be played on a DVD/VCR Receiver that does not have VHS
Hi-Fi.
® AUDIO MODE can be switched between HI-FI and
NORMAL using _/_.
Use Y to
then use
Press 4/_
LINEI(L1)
choose the SOURCE SELECT option,
_./_ to semect TUNER.
repeatedly to switch between TUNER,
and LINE2(L2).
Use
choose
the AUTO
CHANNEL SET option,
thee _use to
41/_
to search
for chaeeema.
The tuner wil! automatically cycle through all
available channels in the area and place them in
the tuner's memory.
' After the AUTO CHANNEL SET PROCEEDING is
compmete, make sure the TUNING RAND is set
appropriatemy (TV or CATV} using _
and
choosing the correct TUNING BAND (TV or
CATV} by using _q/_ whime in the TUNING menu.
Remember, TV is for the air antenna reception,
CATV is for cable or wireless cable connection.
BROADCAST
TYPE (STEREO/SAP/MONO}
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display to
the desired position when both MTS stereo and SAP signals are
received. When only one of the MTS signal is received, the
DVD/VCR Receiver automatically selects the corresponding
receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO
position. The DVD/VCR Receiver will then record a STEREO program when available, and record a mono program IF the program is
NOT IN STEREO.
For weak STEREO and/or SAP broadcasts, changing the display to mono may give clearer sound.
® BROADCAST TYPE can be switched between STEREO,
SAP, and MONO using 4/_.
Press MENU to return to the TV screen.
AUDIO OUTPUT
(STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/NORMAL) is
in HI-FI position] for selecting the audio output signals from the
AUDIO OUT terminals (L ch and R ch), and RROUT.
This display setting should normally be left in the stereo position, so that when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
® AUDIO OUTPUT can be switched between STEREO, LEFT,
and RIGHT using _/_.
Use CH,q'RK (_k/V) on the remote contro_ or
CH/PRESET (,_£_'} on the front panel to cycme the
DVD/VCR Receiver through the channems in
memory.
_
Press
MENU
when
finished.
TO ADD OR ERASE CHANNELS
FROM MEMORY
This feature allows you to add or erase channels in
memory manually.
1
Press V to choose the CH. ADD/DEL option on the
TUNING menu. Use 4i/_ to select a channel to add
or erase.
2
Press ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase channels.
3
Press MENU to return to the TV screen.
Setting
the Clock
_ote
The DVD/VCR Receiver gives you two ways to set the
time and date: the Auto CEock Feature or manually. The
Auto Crock feature enabres the DVD/VCR Receiver to
set up the clock while the DVD/VCR Receiver is turned
off.
® The clock uses the 12-hour system.
(Be sure to set AM
There are cases where the TV station does not send or sends
the wrong time. Therefore, the incorrect time will be set. If this
happens we recommend that you set the clock manually.
Manual
CHock Set
Press MENU and the MAiN menu will appear.
and PM correctly.)
® The initial Clock Setting is JANUARY
Auto
1, 2004, 12:00 AM.
CWock Set
The Auto Clock Set feature is set to ON at the factory. In the
ON setting, the DVD/VCR Receiver looks for a channel carrying XDS (Extended Data Services) information. XDS updates
the clock using the Coordinated Universal Time.
The Auto CEock feature enaMes the DVDNCR Receiver
to set up the clock while the DVD/VCR Receiver is
turned off.
_
Use
to choose
the CLOCK
CLOCK menu
menu.will appear.
Press_ ENTER
and the
Press MENU and the MAiN menu will appear.
Use
to choose
the CLOCK
CLOCK menu
menu.will appear.
Press&t_ENTER
and the
Use _/_ to choose
the month.
Use V to choose the DAY option.
Use _/_ to choose the date.
The day of the week will display automatically.
Use V to choose the YEAR option.
Use _/_ to choose the year.
Use T to choose the T_ME option.
Use 4_/_ to choose the time.
Press and ho_d _/_ to advance cmock
continuouemy.
Use _' to choose the AUTO
Use _/_ to choose
ON,
CLOCK
SET option.
The Auto Clock Set feature is set to ON at the factory. In
the ON setting, the DVD/VCR Receiver looks for a channel carrying XDS (Extended Data Services) information.
XDS updates the clock using the Coordinated Universal
Time.
Use _ to choose
the
DAYUGHT
Use T to choose the DAYLIGHT SAVINGS
option.
Use _ or _ to choose AUTO, ON, or OFR
If you choose AUTO, the VCR sets the clock using the
DST information broadcast in the signal (channel).
If you choose ON, the VCR adjusts the clock for Daylight
Saving Time automatically.
SAWNGS
option.
Use _ or _ to choose
AUTO,
ON, or OFR
If you choose AUTO, the DVDNCR Receiver sets the
clock using the DST information broadcast in the signal
(channel). If you choose ON, the DVD/VCR Receiver
adjusts the clock for Daylight Saving Time automatically.
Use T to choose
the T_,_E ZONE
Use _ or _ to choose
the correct
(AUTO,
EASTERN,
CENTRAL,
MOUNTAIN,
PAC_RC, ALASKA
or HAWAH),
If "AUTO" is selected as the time zone, the DVD/VCR
Receiver sets the clock using the first Coordinated
Universal Time information it finds in a broadcast signal.
Press
MENU
when
Press MENU when finished.
option.
time zone
finished.
Turn
DVD/VCR
Receiver
clock off
setthe
feature
sets the
time. and the auto
If setting the dock manually, "AUTO CLOCK SET" must
set to "OFF".
If set to "ON", an incorrect date and/or time will be
entered again when the DVD/VCR Receiver is turned
off.
GeneraJ E×pJanation
Temporary
This manual gives basic instructions for operating the
DVD/VCR Receiver. Some DVDs require specific operation or aEIowonly limited operation during playback.
When this occurs, the symbol Q appears on the TV
screen, indicating that the operation is not permitted by
the DVD/VCR Receiver or is not available on the disc.
® .... : Repeat Title
......................
@c.APf Repeat Chapter
@ ..... ; Repeat Track (non-PBC Video CDs
...........
and Audio CD only)
[email protected] ALL
On-Screen
Displa
Feedback
Field icons
Repeat Disc (non-PBC Video CDs
and Audio CD only)
Repeat A-B
Set the Output Source to DVD as shown in "Selecting
the Unput/Output Source" on page 15.
Repeat Off
Resume play from this point
General prayback status can be displayed on the TV
screen. Some items can be changed on the menu.
On-screen
dispJay
Press DISPLAY during
®
operation
Action prohibited or not available
_otes
® Some discs may not provide n!l of the features on the
on-screen display example shown below.
e If no button is pressed for 10 seconds, the on-screen
display disappears.
p_ayback.
Pressselected
_dT to item
semect
The
will an
beitem,
highlighted.
Pressnumber
4_ to buttons
change can
thebesetting
an item.
The
also beof used
for setting
numbers (e.g., title number). For some functions,
press ENTER to execute the setting.
Items
Function
Title Number
Shows the current title number and total number
titles, and skips to the desired title number.
Chapter Number
Shows the current chapter number and total number
chapters, and skips to the desired chapter number.
Time search
Shows the elapsed playing time, and
searches the point directly from the elapsed time.
Audio language
and Digital Audio
Output mode
Shows the current audio soundtrack
language,
encoding method, and channet number, and
changes the setting.
Subtitle language
Shows the current subtitles
changes the setting.
Angle
Shows the current angle number and tota_ number
angles, and changes the angle number.
Sound
Shows the current sound
changes the setting.
Items
Function
Track Number
(Press AdT to select desired item)
(Press
A,_
SeJection
of
/ _, or Numbers,
ENTER
of
_I / _, or
AUDIO
_ / _, or
SUBTITLE
of
mode, and
desired
Shows the eJapsed pJaying time (Display
Audio Channel
Shows the audio channet,
changes the audio channel.
and
Sound
Shows the current sound
changes the setting.
mode, and
_I / _, or
ANGLE
_ / _', or
SOUND MODE
item)
Shows the current track number, totaJ number of tracks
and PBC On mode, and skips to the desired track number.
Time
_I / I1_or Numbers,
ENTER
Numbers, ENTER
_anguage, and
to select
Method
SeJection
Method
4 / _, or Numbers,
ENTER
onJy)
_ / !_, or
AUDIO
41 / I_, or
SOUND MODE
Jnit
Settings
You can set your personal preferences on the DVD/VCR
Receiver.
Genera_
_
Operation
PressSetup
SETUP.
The
menu appears.
Use _dT
to will
semect
thethe
desired
The
screen
show
current option.
setting for the
selected option, as well as alternate setting(s).
While the desired option is semected, press _,
then Jld_' to semect the desired setting.
Press ENTER to confirm your semection.
Some options require additional steps.
Press SETUP, RETURN, or PLAY to exit the
setup menu.
Language
Disc
Language
Picture
TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is connected. Displays pictures with masking bars above and
below the picture.
4:3 Panecan: Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.
Progressive
Scan
Progressive Scan Video provides the highest resolution
pictures with less flicker and line structure.
If you are using the COMPONENT/PROGRESSWE
SCAN VIDEO OUT jacks, but are connecting the
DVD/VCR Receiver to a standard (analog) television,
set Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Select a language for the disc's Menu, Audio, and
Subtitle features.
Origina_ : The original language set for the disc is selected.
Other : To select another language, use number buttons to
enter the corresponding 4-digit number according to the
language code list on page 44. If you enter the wrong
language code, press CLEAR.
_ote
Disc Language selection may not work for some DVDs.
Z._Caution
Menu
Language
Select a language for the VCR and DVD Setup menu.
This is the menu you see when you press SETUP.
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed on the display
window.
2) Press STOP (I) and hold it for more then five
seconds before releasing it. The video output wil! be
restored to the standard setting and a picture will
once again be visible on a conventional analog TV or
monitor.
Speaker
setup
5.1 Speaker
Auto
settings
Select speaker settings, incruding volume balance and
distance, or test the speaker settings.
Speaker settings are onry active on the AnaEog MultiChannel Output. (See "Speaker Setup", page 37.)
PJay
"You can set up the DVD Prayer so a DVD disc automaticaHy starts pEaying whenever the DVD is inserted.
UfAuto PEay mode is set to On, this DVD prayer wirr
search a title where pEayback time is longest and then
pray back the titre automaticalry.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
_ote
The Auto Play function may not work for some DVDs.
BoL.E. (Black
Level
Expansion)
To select the black level of playback pictures. Set your
preference and monitor's ability.
Others
On: Expanded grey scale. (0 IRE cut off)
The DRC, Vocal PBC, Auto Hay, B.L.E., Pluge and
DNR settings can be changed.
Off: Standard grey scale. (7.5 IRE cut off)
o Use _
to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
Pluge
(BJaeker than
BJack)
For proper adjustment of your television brightness
settings utilizing a commercially available test disc.
On: Select when you adjust the level of your TV using a
commercially available test disc that contains pluge signals.
Off: For normal use.
DNR (Digitat
Noise
Reduction)
You can reduce ambient noise in the picture.
DNRI: Normal level
Dynamic
Range Control
(DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the !oudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
VoeaJ_
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
PBC
Set Playback
Control
(PBC)
to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio
CDs.
DNR2: Expanded level.
Off:
Off.
_otes
® Actual picture enhancement
quality of the disc.
may vary depending
on the
® While the DNR2 (expanded level) can provide additional
improvement in the reduction of noise in the video signal, it
may produce undesirable picture artifacts on some discs.
Should this occur, select a more appropriate DNR level (normal or off).
® Depending on the disc, some picture detail may be lost by
the picture enhancement.
Parental
Contro_
Area
Rating
Movies on bVDs may contain scenes not suitabre for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are
available for selection on some discs. Ratings are
country dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See "Country/Area Code List", page 45).
_
emectmenu.
Area Code using the ,_d_' buttons
setup
on the
While Area Code is semected, press _.
Follow step 3 of "Rating"
_
2
emect Rating on the Setup menu using _dT
buttons.
Whime Rating is semected, press
_.
When you have not entered a password yet.
Enter a 4-digit password using the numbered buttons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit
password again and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numerica!
buttons to confirm the personal 4-digit security
password, then press ENTER.
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
_
elect(1)a has
rating
to 8 usingrestrictions.
Ad_' buttons.
One
the from
most 1 pmayback
Eight (8) has the _east p_ayback restrictions.
The Hmitation will be more severe as the mevem
number decreases,
Unmock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the DVD,
all disc scenes with the same rating or lower will be
played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found, playback will stop. 'You must enter the 4-digit password
or change the rating level in order to play the disc.
Press ENTER to confirm
your rating semection,
then press SETUP to exit the menu.
_
Select the first character
on meft.
using the ,Lf_ buttons.
Press _ to shift to second character and semect
the second character using ,_dT buttons.
Press ENTER to confirm your Area code
semection, then press SETUP to exit the menu.
Confirmation of the 4-digit password is necessary when
the password is changed (see Changing the 4-digit
password below ).
Changing
the 4-digit
password
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old password, then press ENTER.
3 Select Change using ,L/T buttons then press
ENTER.
4 Enter the new 4-digit password, then press
ENTER.
5 Enter exactly the same password a second time and
verify by pressing ENTER.
5 Press SETUP to exit the menu.
ff you forget
your
4-digit
password
If you forget your password, to clear the current password follow the procedure below.
1 Press SETUP to display the setup menu.
2 Enter the 6-digit number 210499.
The 4-digit password is cleared.
3 Enter a new password as shown above to the left
(Rating).
Normal
Specia!
Playback
Effect
Playbacks
Preparation:
_
® Turn on the TV.
® Tune the TV to the DVD/VCR Receiver output channel (CH
3 or 4) or set the TV's source selector to VIDEO.
® If a direct VIDEO/AUDIO connection is made between the
DVD/VCR Receiver and the TV, set the TV's source selector
to VIDEO.
® Set the Output Source to VCR as shown in "Selecting the
Input/Output Source" on page 15.
Insert
a prerecorded
video
Speciam effects
Receiver
® Horizontal lines (noise bars) will appear on the TV screen.
This is normal.
® The audio is automatically muted during special effect modes,
so there is no sound during search.
® During high-speed picture search mode, a short period is
needed to stabilize tape speed when re-entering the PLAY
mode. Slight interference may be observed during this period.
This function lets you quickly
desired tape section in either
• If a tape without a safety tab is inserted, the unit will
start playback automatically.
1 Press BACKWARD
or FORWARD
during
The DVD/VCR
Receiver will be activated
SEARCH
2 To return
PLAY once.
appears on the TV screen.
appears
to stop
Control
Tracking
The AUTO
works
TRACKUNG
function
the picture
to
in the foflowing
PAUSE/STEP
to playback,
to advance
at a time while
press
the
viewing
a still
PLAY.
SLOW.
wifl be played
back
than the normal
at a speed
1/19 times
speed.
e During slow playback, use CH/TRK (A/T) on the Remote
Control to minimize noise bands.
® Tape speed (SP, SLP) changes.
® Streaks or snow appear because of scratches on the tape.
Manuam Tracking
Uf noise appears on the screen during playback,
press
either CH_qRK A/T on the remote control or OH/PRESET (A/V) on the front panel
screen is reduced.
1 Press
slower
® A tape is played back for the first time.
repeatedly
one frame
SLow Motion
The tape
cases:
Receiver is left in the STILL mode for
more than 5 minutes, the DVD/VCR Receiver will automatically enter the STOP mode to protect the tape and
video heads.
3 To return
adjusts
on the remote control.
® If the DVD/VCR
video picture
picture.
The automatic
tracking function
remove snow or streaks.
and Frame=by-Frame
CHfrRK(A/T)
playback,
on the TV screen.
2 Press
Auto
PLAY.
® If a still picture vibrates vertically, stabilize it using
® If the tape reaches the end before STOP is pressed, the
DVD/VCR Receiver will automatically stop, rewind and
eject the tape, and it will turn itself off.
Tracking
press
1 Press PAUSE/STEP
during playback.
Still picture will appear on the TV screen.
• In playback, the TViVOR selector switches to VCR
mode automatically.
STOP
playback.
in the
mode.
to playback,
Still Picture
P_ayback
® It is not necessary to select the tape speed for
playback. It will be automatically selected by the
DVD/VCR Receiver.
STOP
and visuafly search for a
direction:
forward or
reverse.
® Make sure that the Q indicator in the display
window is not lighted. If it is, press POWER once.
Press
notes
Search
cassette.
The O'--O indicator will light and the DVD/VCR
will power-up automatically.
Press
PLAY
p_aybaek
until the noise
® If slow motion mode continues for more than 3 minutes,
the DVD/VCR Receiver will automatically change to playback mode.
2 To return
to playback,
press
PLAY.
on the
® If vertical jitter is present, adjust tracking controls very
carefully.
® Tracking is automatically reset to normal when the tape is
ejected or the power cord is unplugged for more than 3
seconds.
Variable
playback
speed
control
During
Pmaybaek use _ql/_, you can
ing playback
speeds.
(-7xplay
(REV),
(STILL),
1/19 slow
-3xplay
(-3PLY),
(SLOW),
reach
the follow-
-play (-PLAY),
play (PLAY),
2xplay
still
(2PLY),
7xplay(OUE)).
During
appear
s!ow motion and shuttle,
on the picture according
If distortions
with CH/TRK
can be seen
(,L/T)
the noise bars may
to the status of tape.
in the picture,
on the remote
reduce
control.
them
Normal
Recordin
Timer
Preparation:
® Turn on the power of both the DVD/VCR Receiver and TV.
® Tune the TV to the DVD/VCR Receiver output channel (CH 3
or 4) or set the TV's source selector to VIDEO.
® If a direct VIDEO/AUDIO connection is made between the
DVD/VCR Receiver and the TV, set the TV's source selector
to VIDEO.
insert a video cassette
with the safety tab intact.
Semect the desired
channe_
number
(0o9) buttons.
with
CH/TRK
_JT
or
If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select LINEI(L1)
or LINE2(L2) with INPUT.
Set the desired
recording
with the SP/SLP button.
Set the
Press
MTS
mode
REC/_TR
Recording
speed
as desired
(SP or SLP)
(See
page
t8,
28).
(The
REC indicator
recorded
the timer
needs to know the channels
and the starting
and ending
to be
times.
If you try to set the program timer before setting the clock,
PLEASE SET THE CLOCK appears for a moment and
then CLOCK menu appears on the TV screen. Set the time
and date before proceeding.
® Make sure a tape is in the DVD/VCR Receiver and the
safety tab is in place or the tape will be automatically
ejected.
Preparation:
® Turn on the power of both the DVD/VCR
TV.
Receiver and the
® Be sure the TV is set to the DVD/VCR Receiver output channel
(CH3 or CH4).
® Make sure the TUNING BAND in the TUNING menu is set
(TV or CATV).
will light in
® If a cassette with no safety tab is loaded, the cassette
will be ejected automatically.
Press STOP to stop recording.
If the tape reaches the end before STOP is pressed, the
DVDNCR Receiver will automatically stop, rewind, eject
the tape and turn itself off.
1
ed recording,
appropriately
the dispray window.)
® REC indicator appears only when the Output Source is
set to VCR.
To pause
This DVD/VCR
Receiver can be programmed
to record
up to 8 programs within a period of 1 year. For unattend-
(@) once,
win start.
Recording
_
Press
Use _
Press
MENU
and
the
to choose
ENTER
MAiN
the
menu
PROGRAM
to go to the
will
appear.
menu.
PROGRAM
menu.
The PROGRAM
menu wil! appear.
® If all 8 programs have been entered, FULLY
PROGRAMMED message will appear for a moment
and then PROGRAM 1 will appear on the TV screen.
recording
Press PAUSE/STEP
recording.
to pause
the tape
during
The REC indicator will flash in the display window.
2
When
you want to continue
recording,
press
PAUSE/STEP
or REC/FR
(@).
® After 5 minutes in Pause mode, the tape will be stopped
automatically to protect the tape and the video heads.
another
1
Use TV/VCR to select the TV mode
"TV" appears in the display window.
2
Using
the TV, select
the channel
during
the PROGRAM No. (1-8).
Use _' to choose the MONTH option.
Use "_./_ to choose the desired month.
Use _' to choose the DAY option.
Use ,4./_ to choose the desired day.
To record one TV program whi e
watching
Use _/_ to choose
recording.
to be viewed.
Always use PAUSE/STEP for best results when making
changes during recording.
For example: To change channels during recording, first press
PAUSE/STEP to put the unit in pause mode. Select the desired
channel on the DVD/VCR Receiver, then press PAUSE/STEP
again to resume recording.
Use _'
choose
START
Use
_/_to to
choosethethe
desiredoption.
start time.
Use V to choose the STOP option.
Use _/_ to choose the desired stop time.
Use _' to choose the CHANNEL option.
Use _,,1_ to choose the desired channem
(Channem, UNE1 (L1) or UNE2(L2)).
Cabte Users: If you have CABLE TV and used Cable Box
in Connecting Antenna/Cable TV to DVD/VCR Receiver
(page 11), using a cable box converter, you must set the
channel in this step to match the cable box output channel
(usually CH 3 or 4). Change channels on the cable box
instead of with the DVD/VCR Receiver.
Use V to choose
the
SPEED
option.
Use _1/_ to choose
the desired
recording
speed (AUTO, SP or SLP),
AUTO mode determines how much tape is left and
switches speed from SP to SLP, if necessary, to complete recording the program. There will be some picture and sound distortion at the point of the speed
change.
Use V to choose
Use "_./_ to choose
the
REPEAT
the desired
option.
repeat
® If the power fails or the DVD/VCR Receiver is unplugged
from the AC outlet, the correct clock time and timer settings
are kept in memory for approximately 3 seconds. After 3
seconds, the clock and program timer must be reset when
power is restored. Reset the clock according to instructions.
® After setting up a timer recording, recording will start if no
other timer recordings are scheduled to occur at the same
time (see "Program Priority" at right).
(ONCE,
WEEKLY
or DA_LY).
ONCE event....for recording up to 8 programs on a
single day or over the days within a period of t year.
WEEKLY event....for recording up to 8 programs on a
certain day of every week.
DAILY event....for recording up to 8 programs at the
same time(s) Monday through Friday.
Checking
(Erasing)
Programming
Programming
can be checked
Receiver is turned on.
1
2
Press
MENU,
the
program
will
be memorized
by the DVD/VCR
Receiver.
® TIMER indicator lights in the display window.
® If the program preset time has past, the PAST TIME
PROGRAMMED message will appear on the TV
screen. Return to the incorrect program and program
it with the correct time.
If you have finished programming and you want to set the
DVD/VCR Receiver to record the programs you have entered,
MAKE SURE YOU HAVE INSERTED A TAPE mNTOTHE
DVD/VCR Receiver. The DVD/VCR Receiver is now set to
record the preset programs.
whenever
the DVD/VCR
ENTER
and the PROGRAM
menu
will appear.
3 Use 4!/_* to select a program you want to check or
erase, if you want to erase the program, press
CLEAR.
4 Press MENU to return to the TV screen.
Program
Priority
_:ooPM8:OOPM9:OOPM
_0:00PM if the starting and ending
I
I
I
I
times of two or more timer
ProgNo 1
........
® If you had entered a past date, timer recording will
be performed on that date of the next year.
® Additional programs may be entered by repeating
steps 1-12.
Cable Users: If your cable hookup is via a TV
converter box, you can program multiple recordings
only on the converter box output channel. This is
because the converter determines what channel you
view through your DVDNCR Receiver.
Record
Press MENU and the MAUN menu will appear.
Use A/_' to choose the PROGRAM
menu.
Press
ff the input data is wrong, use ,_ to semect the data
and correct it using _V_.
Timer
recordings
overlap
on the
......... the
sameearliest
day, priority
is given
recording.
For to
Theseportionswill
notbe recorded,
example,
in the diagram at
left PROGRAM
2 will not be
recorded
until PROGRAM
1 is finished.
The first part of
PROGRAM
2 will not be recorded.
Likewise,
PROGRAM 3 will not be recorded until PROGRAM
2 is finished,
and so on.
Insta
Dubbing
Timer Recording
Instant Timer Recording
easily of a preset length
ble timer.
al!ows you to make a recording
without using the programma-
and Editin
If you wish to edit or dub your camcorder
VCR)
recordings
(or Front)
panel
Preparation:
iacks
_, Turn on the power of both the DVD/VCR Receiver and the TM
_, Be sure the TV is tuned to the DVD/VCR Receiver output channel
(OH3 or 4).
If a direct VIDEO/AUDIO connection is made between the
DVD/VCR Receiver and the TV, set the TV's source selector to
VIDEO.
direct A/V iacks
than
_
Insert a video
cassette
with
the safety
tab
intact.
Semect the desired
channeB with CH/TRK
_JT
number
(0°9) buttons.
The channel number appears on the TV screen.
or
The tape
speed
will appear
speed
Press
REO/ITR
recording
time
to select
the Recording
the Recording
The recording
time can be extended
ing REC/FR
Subsequent
(@).
presses
time by 30-minute
If you
Receiver,
camcorder
(or another
a TV attached
you can
to your
see the
video
p_ay-
DVD to VCR
_
nsert Disc
Insert the disc you wish to copy
COPY
in the DVD deck
press
REO/ETR
tape into the VCR deck.
on the
(@) button
unit front
panem or
on the remote
control
and the VCR
will
go into Record mode.
® If the DVD disc menu appears, you may need to press
manually to begin copying.
Q "COPY" indicator will light.
Stopping
the Copy Process
When the DVD is finished playing, press STOP to end
copying.
You must stop the Copy process manually when the DVD
movie ends, or the unit may replay and record over and
over again.
by press-
_otes
button
The DVD will go into Play mode
Time
® If you press PAUSE/STEP during instant timer recording, the
DVDNCR Receiver will enter the recording pause mode.
Instant timer recording is cancelled.
® If the DVDNCR Receiver is set to "0H00M', the DVD/VCR
Receiver goes to normal recording mode.
of a DVD to a
the disc tray.
Press
PLAY
the recording
the contents
Insert VHS Tape
Insert a blank VHS video
_ 0H00M
increments.
you to copy
VHS tape.
Time
result in advancing
in the
have
from
and dose
anytime
results
emect the input channeB "LINE2"
(Use iNPUT to
semect UNE2(L2)}.
If you have connected your DVD/VCR Receiver to the
A/V input jacks on the rear of DVD/VCR Receiver, you
should select the input channel LINEt(Lt) by pressing
INPUT twice.
This unit allows
Press REC/ITR (@) once to check the recording time.
The recalled setting will automatically
return to the TV
screen after 6 seconds.
To extend
picture
Before recording, please confirm the recording start position.
Length Display
(each additional
press of
REC/ITR (O) increases recording
time 30 minutes)
Checking
better
When you desire the recording
to begin,
press
DVD/VOR
Receiver's
REO#TR
(@) once to start.
You can stop the recording by pressing STOR
mNSTANT TIMER RECORD MENU
..... 9H00M
provide
input
and easy. These
Receiver
will stop recording
and shut off.
® During Instant Timer Recording, changing the channel
on the DVD/VCR Receiver will not be possible.
o You can stop the recording by pressing STOR
0H30M
quick
the rear
(A/V)
onnect the camcorder's
(or another VCR's) A/V
outputs to your DVD/VCR Receiver as illustrated
on
Copying
the DVD/VCR
and Video
the
mength.
At the end of the recording,
will also
(or another
Receiver,
using the RF iack on the rear panel.
DVD/VCR
ing.
on the TV screen.
(@) repeatedmy
Audio
make the connections
VCR).
(SP or SLP)
Press REC/ITR
(@) twice.
The menu as illustrated, will appear on the TV screen.
o Recording will start. (The TIMER indicator will light)
mounted
Play the tape
® if you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select
LINEI(LI)
or LINE2(L2).
Semect the desired
recording
with the SP/SLP button.
DVD/VCR
page 14.
£
_
to this
_ote
® If the DVD you are attempting to copy is copy protected, you
will not be able to copy the disc. It is not permitted to copy
Macrovision encoded DVDs. "LOCK" is displayed in the display window.
® When you stop the DVD playback during copying, VCR
recording mode also stops automatically.
® You must set Progressive Scan to Off to copy process.
MTS (Mu[tFChanne[
MTS Broadcast
This DVD/VCR Receiver is equipped with the VHS Hi-Fi
audio sound system for recording and playback. The
information below gives a brief description of Hi-Fi audio
and how to record and play a tape in the Hi-Fi audio
mode.
stereo/bilingual
TV sound system.
Mu[tichanne[
Playback
with HFFi Stereo Audio
Sound
A stereo TV with AUDUO/VUDEO input jacks or a stereo
audio system is required for true stereo playback. To
experience the full and rich stereo sound available with
Hi-Fi recorded tapes, we recommend the connection of
this unit to a home stereo audio system.
Set the AUDIO MODE option
SETUP menu.
TV Sound)
This DVD/VCR Receiver wi[[ decode MTS stereo and
bilingua! (SAP) off-the-air broadcast sound signals. It
also decodes stereo TV sound from local cable companies, as long as they operate on assigned came fiequencies and use the EIA-recommended MTS
TV Sound
Indicator
(MTS)
Shows onscreen as illustrated below when ENTER is
pressed.
® One or both of the indicators will light, depending on the
MTS broadcast.
rv
I
to HFFI on the
screen
r ......................
STEREO/SAP
CH 4 "_"_
Lights up when a stereo broadcast
is
being received,
STEREO
SAP
mILights up when a SAP BIUNGUAL
I broadcast is being received,
k
if only STEREO appears on the TV screen.
The DVD/VCR Receiver can record in stereo onto the VHS HiFi audio tracks when the BROADCAST TYPE option is in the
STEREO position. The DVD/VCR Receiver will also record
mono audio onto the mono audio track.
if onmy SAP appears on the TV screen.
Set the BROADCAST TYPE option to SAR
Set the AUDIO
position,
OUTPUT
option
to STEREO
STEREO: The left channel sound (L) is heard from the left
speaker and the right channel sound (R) is heard from the
right speaker,
LEFT: The left channel sound (L) is heard from both
speakers.
RIGHT: The right channel sound (R) is heard from both
speakers.
if STEREO/SAP appears on the TV screen
Use the BROADCAST TYPE option to select the desired
recording mode (STEREO or SAP).
SAP (Second
_
Program)
Recording
insert a video cassette
with the safety tab intact.
Set the BROADCAST TYPE option to SAP
(SETUP menu),
Do this if only the SAP appears on the TV screen or you
know the program will use the SAP.
Press MENU.
_
Audio
Some stations transmit a Second Audio Program, which
is used for a second language or additional information.
When the station broadcasts a Second Audio Program,
follow the procedure below to record the SAP.
Insert
cassette
and stereo
press system.
PLAY.
Adjust avolume
at your
Press MENU.
_
elect the desired recording
with the SP/SLP button.
Semect the desired
on the TV screen.
channel
speed (SP or SLP)
SAP should
appear
Press REC/mTR (@) once
Youare now recordingthe programyou see and hear on the
TV.
Press STOP to stop recording.
Tape Counter
Real=Time
Memory
Additiona(
Featur
Counter
Shows (ength of tape run in hours, minutes,
and
seconds.
Press CLK/ONT
to select the real-time
counter display.
Every press of CLK/ONT
illustrated
below.
CLOCK
changes
the TV screen
as
information
® In manual recording, Timer recording, Instant Timer
Recording, playback, or fast forward modes, the DVDNCR
Receiver automatically starts rewinding the tape at the end
of the tape. The cassette will stop at the beginning of the
tape and be ejected, and the DVD/VCR Receiver will turn
itself off.
® After you have finished using the DVD/VCR Receiver,
rewind, eject, and remove the cassette. Place the cassette
in its protective sleeve to protect it from dust. It is not necessary to rewind the cassette before removing it, but if you
do, it will be ready to play or record the next time you use it.
COUNTER
REMAINING TIME
® Counter changes to "0:00:00" when the cassette is
ejected.
® The real-time counter does not operate if nothing is
recorded on the tape.
® The real-time counter will not work unless a tape is
inserted.
® Be sure the DVD/VCR Receiver Channel Selector is on the
correct channel you wish to record. The channel that is
being recorded can always be checked by tuning the television to the DVD/VCR Receiver channel (3 or 4) and pressing the VCR button to set the DVDNCR Receiver to VCR
mode (VCR appears in the display window).
® Do not attempt to hook up more than one television set to
the DVD/VCR Receiver for either recording or playback.
_ote
During the "L1 OPT" mode, the OSD(On
Display) can not be changed.
Screen
Auto
Play System
This DVD/VCR
Counter
Memory
This is usefuE if there
Feature
is a section
view immediately
after recording
to the same point severa( times.
_
Begin
recording
or p(aying
Receiver
features
automatic
playback.
Load a cassette (with the safety tab removed).
® The Output Source is changed to VCR mode automatically.
of tape you want to
® The power turns on automatically
or if you want
® At the end of the tape, the DVDNCR
rewinds the tape.
to return
and playback begins.
Receiver stops and
® The cassette is ejected after rewinding and the VCR turns
itself off automatically.
a tape.
At the point that you want to (ocate mater, reset
the reaFtime counter to '°0:00:00" by pressing
CLEAR.
_
Continue
_ote
to p_ay or record.
Press STOP when recording
finishes,
or p_ayback
Press BACKWARD.
The tape automatically stops when the tape counter
returns to about "0:00:00".
shows
e
P(ayback
the remaining
recording
or playback.
Press
CLK/ONT
repeatedly
on the TV screen
time on the tape
until the REM
during
recording
indicator
or playback.
_ote
The remaining tape length indicator may not be displayed
correctly depending on the condition of the tape and the kind of
the tape (T-140, T-160, or T-210 etc)
(SQPB)
This DVD+VCR can also play back a tape which is recorded in S-VHS playback picture.
cannot record in S-VHS format
® SQPB is an abbreviation
during
displays
S=VHS Quasi
® This DVD+VCR
Tape Remaining
This function
Auto power off does not function during regular DVD play
mode. (DVD/VCR Receiver power stays on.)
for S-VHS Quasi Playback.
PWaying DVD and Video CD
Playback
Setup
_
_
Turn on the TV and select the video input source connected
to the DVD/VCR Receiver.
Audio system: Turn on the audio system and select the input
source connected to the DVD/VCR Receiver.
Set the Output Source to DVD as shown in "Selecting the
Input/Output Source" on page t5.
Press OPEN/CLOSE
(&) to open the disc tray.
Load your chosen disc in the tray, with the mabem
facing up,
When a double-sided DVD is inserted, make sure
the side you want to play is facing down.
Press OPEN/CLOSE (&) to close the tray.
"READING" appears in the display window, and
playback starts automatically. If playback does not
start, press PLAY.
In some cases, the disc menu might appear
instead.
_lf
a menu
screen
is dispJayed
A menu screen may appear automatically
DVD.
after loading a
Use _!/_/,L/_' buttons to select the title/chapter you
want to view, then press ENTER to start
playback.
Press TOP MENU or D_SC MENU to return to the menu
screen.
General
Features
m
Dote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Moving
to another
TITLE
If a disc has more than one title, you can move to
another title as follows:
o Press DISPLAY, then press the appropriate number
buttons (0-9) to select a title number.
Moving
to another
CHAPTER/TRACK
If a title on a disc has more than one chapter or a disc
has more than one track, you can move to another
chapter/track
as follows:
,, Press SKiP J_l or I_l briefly during playback to
return to the beginning of the current chaptedtrack or
to select the next chaptedtrack.
o Press SKiP I_l twice briefly to step back to the previous chaptedtrack.
® To go directly to any chapter/track during playback,
press DISPLAY. Use _1_ ' to select Chaptedtrack icon.
Then, enter the chapter/track number with the number
buttons (0-9).
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
® Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
® Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
"Youalso may set PBC to Off under setup. See page
22.
SLow Motion
_
_
1 Press SLOW during playback or still mode.
The player will enter SLOW mode.
2 Use SKiP 1_41 or _
(or SLOW) to select the
required speed:
_II11/16, _i 1/8, 41 1/4, _111/2 (backward), or
m_ 1/16, !_ 1/8, HI_1/4, HI_1/2 (forward).
3 To return to playback, press PLAY.
,, If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit password
must be entered and/or the disc must be authorized
(see Parental Control, on page 23).
,, DVDs may have a Region Code.
Your DVD/VCR Receiver wil! not play discs that have
a Region Code different from your DVD/VCR
Receiver. The Region Code for this DVD/VCR
Receiver is 1 (one).
,, Do not keep a fixed image displayed on the screen
for a long time.
_otes
,, Slow motion playback in reverse is not applicable for
Video CD.
Sti_mPicture
and Frame=by-Frame
P ayback
1 Press PAUSE/STEP during playback.
The DVD/VCR Receiver will go into PAUSE mode.
2 "Youcan advance the picture frame by frame by
pressing PAUSE/STEP repeatedly on the remote contro!.
3 To return to playback, press PLAY.
GeneraJ Features
(Continued
Search
1 Press and hord SKiP I_,_,_ or _
for about two seconds during playback.
The DVDNCR Receiver will now go into SEARCH mode.
2 Press and hold SKIP I_-'_ or _
repeatedly to
select the required speed: _X2,
_,_X4, _,_X16,
_X100
(backward) or _X2,
_X4,
_X16,
_XI00
(forward).
With a Video CD, the Search speed changes: _,_X2,
_X4,
_,_X8, (backward) or _X2,
I_¢_X4, _X8,
(forward).
3 To return to playback, press PLAY.
Random
_
_
1 Press RANDOM during prayback or in Stop mode.
The unit automaticarry begins Random Playback and
"RANDOM" appears on the TV screen.
2 To return to normar playback, press RANDOM until
"NORMAL" appears on the TV screen.
By pressing SKIP _
or _,_! during Random pEayback, the unit serects another title (track) and resumes
Random playback.
® This function only works with DVD Karaoke discs and
Video CD without PBC.
® On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Random function. See
page 22.
Repeat
_
_
DVD Video Discs - Repeat Chapter/Titme/Off
1 To repeat the currently playing chapter, press
REPEAT.
The Repeat Chapter icon appears on the TV screen.
2 To repeat the title currently playing, press REPEAT a
second t_me.
The Repeat Title icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Video CDs - Repeat TracWAIVOff
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
2 To repeat the disc currently playing, press REPEAT a
second time.
The Repeat All icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 22.
Repeat
A=B
To repeat a sequence in a title:
1 Press A-B at your chosen start point.
"A * " appears briefly on the TV screen.
2 Press A-B again at your chosen end point.
"A B" appears briefly on the TV screen, and the repeat
sequence begins.
3 To cancel the sequence, press A-B.
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a home theater system.
1 Press SOUND MODE to select "3D SUR" during
playback.
2 To turn off the 3D Surround effect,
press SOUND MODE again to select "BYPASS".
Time Search
The Time Search function allows you to start playing at
any chosen time on the disc.
1 Press DISPLAY during playback. The on-screen display appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2 Within 10 seconds, use A/T to select the Time
Search icon in the on-screen display.
The 'M--:--" appears in the Time Search box.
3 Within 10 seconds, use the numbered buttons to
enter the required start time. Enter hours, minutes
and seconds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4 Within 10 seconds, press ENTER.
Playback starts from the selected time on the disc. If you
enter an invalid time, playback will continue from the current
point.
Zoom
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM during playback or still playback to activate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to six steps.
2 Use _/m/,L/_ buttons to move through the zoomed
picture.
3 Press CLEAR to resume normal playback or return to
the paused image.
_otea
® The Zoom function may not work with some DVDs.
e The Zoom function may not work with some
multi-angle scenes.
General
Features
Marker Search _
(Continued)
Spec
_
Checking
DVD Features
discs:
You can start playback from a memorized point. Up to
nine pointscan be memorized.
To entera mark, folrowthese steps.
I Duringdiscprayback,press MARKER
when playback
reachesthespotthatyou want tomemorize.
The Markericonwill
appearon theTV screenbriefly.
2 Repeat step I to enterup to nineMarker pointson a
disc.
To Recall a Marked Scene
Menus
DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select an
option. OF, use _/_/A/T
buttons to highlight your selection, then press ENTER.
Tit_e Menu
1 Press TOP MENU.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press TOP MENU again.
Disc Menu
1 Press DISC MENU.
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Within 10 seconds, use _/_ or number button to
select a Marker number that you want to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
5 To remove the MARKER SEARCH menu, press
SEARCH.
® All markers are erased when the disc is ejected.
Video
of DVD Video
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Within 10 seconds, use _/_ oF number button to
select a Marker number that you want to recall.
3 Press ENTER.
Playback will start from the Marked scene.
4 To remove the MARKER SEARCH menu, press
SEARCH.
To Cmear a Marked Scene
Changing
the contents
The disc menu is displayed.
2 To remove the disc menu, press DISC MENU again.
Camera
Angle
_
N
If the disc contains sequences recorded from different
camera angles, the angle icon blinks on the TV screen.
"You can then change the camera angle if you wish.
® Press ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the display.
Mode
® With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That
means Vertica! interpolation oF Deqnterlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
® To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback. The
new video mode selected is displayed on the TV
screen. Check whether the video quality has
improved. If not, repeat the above procedure until picture quality is improved.
® Video mode sequence:
Auto -_ Film -_ Video -_ Auto
® If you turn off the power, the video mode will return to
initial default state (Auto).
DetaiJed Description
of each Video Mode
Auto : The source material of the DVD video (film material or
video material) is determined from disc information.
Fi_m : Suitable for playing film based content or video based
material recorded by the progressive scan method.
Video : Suitable for playing video based content with
comparatively little motion.
Changing
r._
Scan
Language
uuD
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
Changing
the Audio Channem
__
®;;°°-
® L_/ _ ......
Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT or RIGHT).
Subtitles
_
I_I _"_
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
If _
appears, the feature is not available on the disc.
Screen
The video mode setting only works when the Progressive
mode is set to "On" in the Setup menu.
the Audio
1 ENG
Saver
The screen saver picture appears when you leave the
DVD/VCR Receiver in Stop mode for about five minutes.
Playing an Audio CDs and IVIP31WM
Notes
Discs
About
The DVD/VCR Receiver can play MP3/WMA formatted
recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MPS/WMA discs, read the notes on
MPS/WMA Recordings on right.
® An MP3 fib is audio data compressed by using the
MPEG1 audio layer-3 fib-coding scheme. We call
files that have the ".mp3" file extension "MP3 flies".
® The DVD/VCR Receiver can not read an MP3 fib
that has a file extension other than ".mp3".
Insert a disc and dose the tray.
Audio CD: Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc: The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2.
#q JPEG
Use
aJv to seBect the MP3/WMA then press
ENTER.
The MP3ANMA menu appears on the TV screen.
Press RETURN to move to the MP3fWMA-JPEG
chobe menu.
Use A/T to semect a folder then press ENTER.
A mistof fines in the folder appears.
Use _
to select a track then press PLAY or
ENTER.
Playback starts.
During playback, the current track's elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press TOP MENU to move to the next page.
Press DISC MENU to move to the previous page.
Audio
CD Menu
MP3/WMA Menu
If you are in a fib list and want to return to the Folder
list, use the ,_/V to highlight ->- and press ENTER to
return to the previous menu screen.
To stop pmaybaek at any other time, press
STOR
About
on MP3/WMA
Recordings
MP3
WMA
(Window
Media
Audio)
FHes
® An WMA fib is a Microsoft audio compression
tech no!ogy.
® WMA(Windows Media Audio) offers double the audio
compression of the MP3 format.
MP3/WMA
Disc compatibility
limited as follows:
with
this
player
is
1. Sampling Frequency / only at 44.1kHz (MP3),
22.05 - 44.1 kHz (WMA)
2. Bit rate / within 32 - 320kbps (MP3),
32 - 128kbps (WMA)
3. CD-R physical format should be "ISO 9660"
4. If you record MP3fWMA flies using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "EasyCD Creator", which creates an ISO9660 fib system.
5. A single session disc requires MP3fWMA files in the
first track. If there is no MP3/WMA fib in the 1st
track, it cannot playback MP3/WMA flies. If you wish
to playback MP3/WMA flies, format all the data in
the disc or use a new one.
6. Fib names should be named using 8 letters or less
and must incorporate ".mp3" or ".wma" extension
e.g. '......... .MP3" or .......... .WMA".
7. Do not use special letters such as "/: * ? " < >" etc.
8. Total number of files on the disc should be less than
650.
This DVD/VCR Receiver requires discs/recordings to
meet certain technica! standards in order to achieve
optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R
containing MP3 or WMA files). That require certain preexisting conditions (see above) to insure compatible
playback.
Customers should amso note that permission
is
required in order to downmoad MP3/W_,_A fimes and
music from the Internet. Our company has no right
to grant such permission.
Permission should
amways be sought from the copyright owner.
Microsoft, Windows Media, and the
Windows Logo are trademarks or
registered trademarks of Microsoft
mCorporation in both the United States
[and other countries
Do_g,,odfo,
Windows
'"_'_
)
Pause
Repeat A=B
1 Press PAUSE/STEP during playback.
To repeat a sequence.
1 During disc playback, press A-B at your chosen starting point.
The Repeat icon and "A * " appears on the menu screen.
2 To return to playback, press PLAY or press
PAUSE/STEP again.
Moving
to another
Tracks ___
® Press SKiP l_
or _
briefly during playback to go
to the next track or to return to the beginning of the
current track.
® Press SKiP I_
vious track.
twice briefly to step back to the pre-
® On Audio CDs, to go directly to any track, enter the
track number using the numbered buttons (0-9) during playback.
Search
___
Press and hold SKIP I_
or _
for about two seconds during playback.
The player will now go into SEARCH mode.
Press and hold SKIP l_
or _q repeatedly to
select the required speed:
_X2,
4_,4X4, _X8
(backward) or
_¢_X2, J_,C_X4,_X8
(forward).
Search speed and direction are indicated on the menu
screen.
3 To exit SEARCH mode, press PLAY.
Random
___
1 Press RANDOM during playback or in Stop mode.
The unit automatically begins Random Playback and
"RAND." appears on the menu screen.
2 To return to normal playback, press RANDOM repeatedly until "RAND." disappears from the menu screen.
Repeat
TracWAH!Off
___
1 To repeat the track currently playing, press REPEAT
The Repeat icon and "TRACK" appears on the menu
screen.
2 TO repeat all tracks on a disc, press REPEAT a second time.
The Repeat icon and "ALL" appears on the menu screen.
3 To cance! Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
2 Press A-B again at your chosen end point.
The Repeat icon and "A B" appears on the menu screen,
and the sequence begins to play repeatedly.
3 To exit the sequence and return to normal play, press
A-B again.
The Repeat icon and "OFF" appears on the menu screen.
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channe! audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a home theater system.
1 Press SOUND MODE to select "3D sun"
during playback.
2 To turn off the 3D Surround effect,
press SOUND MODE again to select "BYPASS".
Changing
the Audio
Channem
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
Viewing JPEG Files on a Disc
This DVD/VCR Receiver can play discs with JPEG flies.
Before playing JPEG flies, read the notes on JPEG
Files on right.
_
nsert a disc and cmose the tray,
The MP3/WMA-JPEG choice menu appears on the
TV screen.
Selecting
other
Files
Press SKiP _
or I_m_4once whiEe viewing a picture to
advance to the next file or to the previous file.
StH_ Picture
1 Press PAUSE/STEP during slide show.
The prayer will now go into PAUSE mode.
2 To return to the sride show, press PLAY or press
PAUSE/STEP again.
To flip the picture
Press _'T while showing a picture to flip the
picture horizontally or a vertically.
Use JdV to semect a folder, and ENTER.
A list of flies in the folder appears.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
To rotate
picture
Press 4/_ while showing a picture to rotate the
picture clockwise or counter clockwise.
Notes on JPEG FHes
® Depending upon the size and number of the JPEG
flies, it could take a long time for the DVD player to
read the disc's contents. If you don't see an onscreen display after several minutes, some of the flies
are too big -- reduce the resolution of the JPEG files
to less than 3072x2048 pixels and burn another disc.
If you are in a file list and want to return to the Folder
list, use the A_' buttons on the remote to highlight
" .. "and press ENTER to return to the
previous menu screen.
ff
you wanttheto fime
wew
file, or
usePLAY.
_JV to
highlight
anda particumar
press ENTER
Viewing the file function starts.
While viewing a file, press RETURN to move to the
previous menu (JPEG menu).
Press TOP MENU to move to the next page.
Press DISC MENU to move to the previous page.
There are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Use 4f_ to highlight the Slide
Speed then use _,/T to select the option you want to
use, and press ENTER.
' To stop viewing at any other time, press STOR
The JPEG menu appears.
® Total number of files and folders on the disc should
be less than 650.
® Some disc may be incompatible due to different
recording format or condition of disc.
o When you are using software such as "Easy CD
Creator" to burn the ipeg flies into the CD-R, ensure
that all the selected flies have the ".iPg" extensions
when copying into the CD layout.
o If the flies have ".ipe" or ".ipeg" extensions, please
rename them as ".iPg" flies.
® File names without ".iPg" extension wil! not be able to
be read by this DVD/VCR Receiver, even though the
flies are shown as JPEG image flies in windows
explorer.
Programmed
Playback
and MP3RNMA Discs
with
Audio
_nsert Video CD and cmose the tray.
CDs
The Program function enabres you to store your
favoudte tracks from any disc in the player memory.
Press PROGRAM whime pmaybaek is stopped.
The VCD Program menu will appear.
Program can contain 30 tracks.
Press
mode
The []
on the
PROGRAM during pmaybaek or in the Stop
to enter the Program Edit mode,
mark will appear to the right of the word Program
right side of the menu screen.
Dote
Press PROGRAM to exit the Program Edit mode;
the [] mark will disappear.
Semect
a track,
ENTER
semected
track then
on thepress
Program
list.to p_ace the
Repeat step 2 to p_ace additionam tracks on the
Program list.
Audio
_
CD menu
MP3,_N MA menu
Press
_.
The
programmed
track you selected last is highlighted on
the program list.
Use A/V to semect the track you want to start
pmaying.
Press TOP MENU to move to the next page.
Press DISC MENU to move to the previous page.
Press PLAY or ENTER to start,
Playback begins in the order in which you programmed
the tracks and "PROG/' appears on the menu screen.
Playback stops after all of the tracks on the Program list
have played once.
To resume normam playback from programmed
pBayback, press PROGRAM.
SeJect a track of CD (or MP3/WMA) mistand then
press ENTER or PLAY.
"PROG" indicator disappears from the display window.
Programmed
PLayback
with
Video
CD
Dote
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 22.
Dote
Press RETURN, PROGRAM or PLAY to exit the Program
menu.
Follow steps 2-6 of "Programmed
Pmaybaek with
Audio CO and MP3iWMA disc" on Belt.
Press PLAY _ or ENTER to start.
Playback begins in the order in which you programmed
the tracks. "PROGRAM" indicator will appear briefly on
the TV screen.
Playback stops after all of the tracks on the Program list
have played once.
TO resume
normal playback
from
programmed
playback,
press PROGRAM.
"NORMAL" indicator will appear briefly on the TV screen.
Repeat Programmed
Tracks
® To repeat the track currently playing, press REPEAT
The Repeat icon and "TRACK" appears on the menu
screen.
® To repeat all tracks on the program list, press
REPEAT a second time.
The Repeat icon and "ALL" appears on the menu screen.
® To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
Erasing
a Track
from
Program
List
I Press PROGRAM during playback (Audio CD and
MP3/WMA disc only) or stop to enter the Program
Edit mode.
The [] mark will appear.
2 Press F to move to the Program list.
3 Use _
to select the track that you wish to erase
from the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
Erasing
the whole
Program
List
I Fol!ow steps 1-2 of "Erasing a Track from Program
List" as above.
2 Use A/T to select "Clear AIr, then press ENTER.
The complete Program for the disc will be erased.
® The programs are cleared when the disc is removed.
® The programs are cleared when another function mode
(VIDEO, radio etc.) is selected.
Adiust the following settings for the builtqn 5.1 channel
surround decoder.
Distance
If you connected speakers to your DVD/VCR Receiver,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the same time. (1N20 ft, 1 ft = 0.30 m)
You can not set the distance of subwoofer speaker.
Test
_
emect "5.1
buttons
on Speaker
the setup Setup"
menu. using the Ab_
Whime"5.1 Speaker Setup"
button.
Press _ buttons
is semected, press
Press ENTER to test the signals of each speaker.
Adiust the volume to match the volume of test signals
memorized in the system.
® Front Left (L) _ Centre _ Front Right (R)
Rear Right (R) _ Rear Left (L) _ Subwoofer
to semect the desired speaker.
Return
_
Adjust
Speaker
options
by using AT4
_ buttons.
selection
Select a speaker that you want to adiust. ((Front speakers (Left), Centre Speaker, Front speakers (Right), Rear
speakers (Left), Rear speakers (Right), or Subwoofer))
Dote
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Volume
Press 4 / _ to adiust the output level of the selected
speaker. (-6dB N 6dB)
Size
Since the speaker settings are fixed, you cannot
change the settings.
® Subwoofer's
size is fixed "Large" and the other
speaker's size are fixed "small".
Press ENTER to return to the previous menu.
Presetting
the Radio Stations
"You can preset 50 stations for FM and AM. Before tuning, make sure that you have turned down the volume.
Listening to the Radi
Preset radio stations in the DVD/VCR Receiver memory
first (see "Presetting Radio Stations" on the left).
Press FM/AM on the remote controm or RADIO
Press FM/AM on the remote controm or RADIO
on the front panem until the frequency band
appears on the display and TV screen.
on the front panel untim the frequency band
appears on the dispmay and TV screen.
The last received station is tuned in.
Use _
on the remote controm repeatedmy to
semeet the preset station you want.
Each time you press the button, the DVD/VCR Receiver
tunes in one preset station at a time.
Adjust the vomume by rotating VOLUME on the
front panemor by pressing VOLUME _, or T on
the remote control repeatedmy.
Use
the remote
or OH/PRESET
JdT A/T
front onpanel
to selecteontrot
the desired
Station.
If you select a blank column, R-SKIP appears in the display window.
To Clear the Stored Radio Stations
Press
FM/AMuntil
on the
the frequency
remote controm
on the on
front pane_
band or
appears
the display and TV screen.
AM
1400kHz
AM
l[_:10kHz
Press FM/AM on the remote contro_ or front
panem to select the desired band.
Homd down TUNING (T/A} on the front panel or
remote eontrom for 1 or 2 seconds, and a station
is searched for automaticaJ_y.
Press MEMORY on the remote
The station is stored.
Use _b'T on the remote
desired station.
control
FM
FM
:i\111111/
¸_i !_i]l]il]i
\
i!_ii_
contro_ to select your
106.0MHz
98
0MHz
,_,
t
Repeat steps 2 to 5 to store other stations.
Press CLEAR the remote
stored radio station.
contro_ to c_ear the
While record or record pause mode, the CLEAR
function may not be operated.
Tuning
into a Station
Manually
Press FM/AM
on the remote
quency
band appears
on the controm
display until
and the
TV frescreen.
on the remote controm to eemectthe
Press TUNING (V/A) on the remote controm to
tune in the desired station.
your
For
reference
Weak FM stations
"ST" may flash when the weak FM stereo signal is
received, select another station.
To turn off the radio
Press I / (_ to turn the DVDNCR Receiver off or select
another function mode (DVD or VCR).
Tuning
into a Station
Automatically
Hold down TUNING (V/_,) on the remote control for 1
or 2 seconds, and a station is searched for automatically.
_ote
The search may not stop at a station with a very weak
signal.
Labeling
Station_
Press _ to move to the station
EM
_FM
name comumn.
87 :SMHz
10_"]
OMHz
Use the _Jv buttons
to select the character
use the _
buttons
cue character.
to shift to the next or previo
Press ENTER to confirm
the station
Press ENTER on the remote
The station name is stored.
control.
name.
then
Theremote
control
canbecompatible
withvarious
brands
ofTVbysetting
theircontror
codes.
TheTOSHF
BAcodehasinitiallybeensettocontrol
TOSHUBA
TVs.
"_)
Setting
TV Control
TV
POWER
POWER
Codes
_
1.
Press TV to set the remote
your TV.
VD/CD
VCR
FM/AM
--
contro_ operating
AUX
MOD_
Ci3 E23
Remease
INPUT
EJECt
2. Whime holding down PROGRAM button, enter
the two digits of your TV's brand code (_isted on
page 4t) using number buttons.
3.
TV POWER
--Number
buttons
PROGRAM.
By pressing
You can
TV POWER
Turn the TV on or off.
CH/TRK V/A
To select TV channels in the upper
or lower direction.
VOLUME T/_,
Number buttons
UNPUT
Adiust the volume of the TV.
To select TV channels.
When selecting channers 1 to 9,
first enter 0 and then the desired
number.
ANGLE
SUBIITLE
AUDIO
[email protected]
@[email protected]
I UNING
SEARCH
eVOLUME
DESPLAy
SET
VOLUME
UP
-CH_qrRK
Switch the TV's input source
between the TV and other input
sources.
SLOW
R
W
STOP
PAUSE!STEP
FWD
PLAY
SKIP
Important
Some TV's may not respond to all the operations
above, or may not be operated at arl with this
remote control. In this case, operate your TV with
its own remote control.
REO/ITR aEPE_T_-B REPEAt
SP/SLP
TOSHmSA
___jJ
_ote
® For some brands, several control codes (brand
codes) are allocated. Try each of them until the buttons work on your TV.
® If you replace the remote control's batteries, set the
brand code again.
RANDOM
_J CD C3 C_
Tabme of TV Brand
Codes
Toshiba
0t
Brand name of your TV
Runco (NEC)
Brand Code
14
Bell & Howell
09
Samsung
1t,12
Carver
I0
Celebrity
03
Sanyo
Scotch
09
1t
Citizen
12
Scott
1t
Curtis Mathes
09, 12
Sears
01,02, 09, 10, 11
Dumont
14
Sharp
08, 13
Electro band
03
Sony
03
Emerson
09, ti
Soundesign
11
Fisher
09
Supreme
03
GE
02, 07, 11
Gibraiter
14
Brand
name of your TV
Goldstar
Brand
Code
1t
Syrvania
10
Tandy
08
07, 15
Hallmark
1t
Technics
Hitachi
06
Techwood
07
Infinity
10
Teknika
04, 10, 12
JBL
10
TM K
11
JCB
03
Victor
05
JVC
05
Vidikron
10
LX!
0t, 02, 09, 10, 11
Vidtech
11
Magnavox
I0
Wards
10, 11, 13
Marantz
I0
Zenith
14
Megatron
06, tt
Memorex
04, 09, ti
MGA
04, tt
Midland
02, 07, 14
Mitsubishi
04, ti
Motorola
08
MTC
12
NAD
0t, 11
Nikko
1t
Optimus
09
Optonica
08
Panasonic
07, t0, t5
Penney
0t, 02, 07, 11, 12
Philco
10
Philips
10
Pioneer
16
Princeclub
12
Prism
07
Proscan
02
Proton
1t
Pulser
14
Quasar
07, 15
Radio Shack
13
RCA
02
Realistic
09, 11, 13
Check
thefollowing
guideforthepossible
causeofa problem
before
contacting
service.
Symptom
Nopower.
Cause
,, Thepowercordisdisconnected.
Solution
,, Plugthepowercordintothewalloutlet
securely.
Thepowerison,butthe ,, Nodiscis inserted.
,, Unsert
adiscortape.(Check
thatthe
DVD/VCR
Receiver ,, Notapeisinserted,
discortapeindicator
inthedisplay
doesnotwork.
window
is lit.)
Nopicture.
,, TheTVisnotsettoreceive
DVD/VCR ,, Select
theappropriate
videoinputmode
Receiver
signaloutput,
ontheTVsothepicture
fromthe
DVD/VCR
Receiver
appears
ontheTV
screen.
,, TV/VCR
modeforDVD/VCR
Receiver
is ,, PresstheTV/VCR
buttonontheremote
settoTVMODE.
contror
repeatedly
tochoose
VCR
mode.
VCRMODEappears
inthedisplaywindow.
e Thevideocableisnotconnected
,, Connect
thevideocablesecurely.
securely.
,, Theconnected
TV power is turned off.
,, Turn on the TV.
No sound,
,, The equipment connected with the
audio cable is not set to receive
DVD/VCR Receiver signal output,
,, Select the correct input mode on the
audio receiver so you can listen to the
sound from the DVD/VCR Receiver.
,, The audio cables are not connected
securely.
,, Connect the audio cable securely.
,, The power of the equipment connected
with the audio cable is turned off.
,, Turn on the equipment connected with
the audio cable.
,, The audio connecting cord is damaged.
,, Replace it with new one.
,, The disc is dirty.
,, Clean the disc.
,, Tape heads are dirty.
,, Clean video heads.
,, Tape is a rental or was recorded on
another VCR.
,, Use CH/TRK (_,/_') for manual tracking
adjustment while tape is playing.
" No disc is inserted.
,, No tape is inserted,
,, Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
,, An unplayable disc is inserted.
,, Insert a playable disc. (Check the disc
type, color system, and Regional code.)
,, The disc is placed upside down.
,, Place the disc with the playback side down.
,, The disc is not placed within the guide.
,, Place the disc on the disc tray correctly
inside the guide.
,, The disc is dirty.
,, Clean the disc.
,, The Rating level is set.
,, Cancel the Rating function or change
the rating level.
,, The remote contro! is not pointed at the
remote sensor of the DVD+VCR.
,, Point the remote control at the remote
sensor of the DVD+VCR.
,, The remote control is too far from the
DVD+VCR.
,, Operate the remote control within 23 ft
(7 m).
,, There is an obstacle in the path of the
remote control and the DVD+VCR.
,, Remove the obstacle.
,, The batteries in the remote control are
exhausted.
,, Replace the batteries with new ones.
,, This remote control use the same
buttons for VCR and DVD functions
(ex. PLAY).
,, When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
The playback picture is
poor.
The DVD/VCR Receiver
does not start playback.
The remote control
does not work properly.
Symptom
Cause
iNPUT,
VOLUME
A/T
e incorrect
mode(e.g.Remote
control
in
and4/_/AfVbuttons
on
TVmode),
remote
control
cannot
operate.
Somechannels
are
_,Thosechannels
weredeleted
withthe
skipped
overwhenusing CH.ADD/DEL
option.
CRiTRK
(A/_r)
Picture
andsoundof
_,Antenna
orcablesareloose.
broadcasting
channel
are
weakormissing.
_,WrongCHANNEL
SOURCE
optionis
beingused.
Camcorder
imageisnot e Camcorder
isoff.
shown,
Solution
_ PressDVD/CD,
VCRorFM/AM
to
selectthecorrectmodeontheremote
control.
_,UseCH.ADD/DEL
torestore
channels.
See"Channel
Selection"
onpage18.
_,Tighten
connections
orreplace
cable.
_,Tryal!CHANNEL
SOURCE
options.
See"Channel
Selection"
onpage18for
details.
• Turncamcorder
onandoperate
properly.
Camcorder image via
A/V input to DVD/VCR
Receiver is not shown on
TV screen.
e DVD/VCR Receiver iNPUT SELECT is
not set to UNE1 (L1) or LINE2(L2).
e Press iNPUT to select LINE input channel (LINE1 (L1) or LINE2(L2)).
Timer recording is not
possible,
_, Clock in DVD/VCR Receiver is not set
to correct time.
• Set clock to correct time. See "Setting
the Clock" on page 19.
_, Timer has been programmed
incorrectly.
Q indicator light does not appear after
programming timer.
_ TV is not Stereo-compatible.
_, Reprogram Timer. See "Timer
Recording" on pages 25 and 26.
_ Reprogram Timer.
Stereo Audio Record
and/or Playback is not
present,
Broadcast program is not in stereo format.
_, DVD/VCR Receiver A/V Out iacks are
not connected to TV AN in iacks,
DVD/VCR Receiver Audio/Video Out is
not selected for viewing at the TV.
DVD/VCR Receiver BROADCAST
TYPE mode is set to SAP or MONO.
Severe hum or noise is
heard,
Radio stations cannot be
tuned in.
_, No action is possible.
_ No action is possible.
• Make A/V connections. Stereo is
available only via A/V output from
DVD/VCR Receiver.
_ Select AUX or A/V source as TV input.
_ Set BROADCAST TYPE mode to
STEREO. See "VCR Setup Menu
Option" on page 18.
_, The plugs and iacks are dirty.
_, Wipe them with a cloth slightly moistened with alcohol.
_, The disc is dirty.
_, Clean the disc.
_, The speakers and components are
connected poorly.
_, The DVD/VCR Receiver is located too
close to the TV.
_, Connect the speakers and components
securely.
_, The antenna is positioned or connected
poorly.
_, Connect the antenna securely.
_, Move your TV away from the audio
components.
Adiust the antennas and connect
external antenna
if necessary.
The signal strength
weak (when tuning
tuning).
of the stations is too
in with automatic
No stations have been preset or preset
stations have been cleared (when
tuning
No sound from DiGiTAL
AUDIO iN (OPTICAL).
by scanning
preset
_ Tune
in the station
_ Preset
the stations
_ Select
OPTICAL
an
manually.
(page
38).
stations).
_ DVD/VCR
Receiver source is not set to
DiGiTAL AUDIO iN (OPTICAL).
by pressing
AUX once.
Enter the appropriate
(See page 21 ).
code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu"
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7O74
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Amharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
847t
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Romanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
VolapOk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faeroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
Enter the appropriate code number for the initial setting "Area Code List" (See page 23).
Code
AD
Country
Andorra
Code
ER
CouNtry
Entrea
Code
LC
Country
Saint Lucia
Code
SC
CouNtry
Seychelles
AE
United Arab Emirates
ES
Spafn
LI
Liechtenstein
SD
Sudan
AF
AG
Afghanistan
Antigua and Barbuda
ET
FI
Ethiopia
Finland
LK
LR
Sri Lanka
Liberia
SE
SG
Sweden
Singapore
AI
AL
Anguilla
Albania
FJ
FK
Fiji
Falkland
LS
LT
Lesotho
Lithuania
SH
SI
Saint Helena
SIovenia
AM
AN
Armenia
Netherlands
FM
FO
Micronesia
Faroe Islands
LU
LV
Luxembourg
Latvia
SJ
Svalbard
Islands
AO
Angola
FR
France
LY
Libya
SK
SIovak Republic
AQ
AR
Antarctica
Argentina
FX
France (European
Territory)
MA
MC
Morocco
Monaco
SL
SM
Sierra Leone
San Marino
AS
American
GA
Gabon
MD
Moldavia
SN
Senegal
AT
AU
Austria
Australia
GB
GD
Great Britain
Grenada
MG
MH
Madagascar
Marshall Islands
SO
SR
Somalia
Suriname
AW
Aruba
GE
Georgia
MK
Macedonia
ST
Saint rome and Principe
AZ
Azerbaidjan
GF
French Guyana
ML
Mali
SU
Former USSR
BA
BB
Bosnia-Herzegovina
Barbados
GH
GI
Ghana
Gibraltar
MM
MN
Myanmar
Mongolia
SV
SY
El Salvador
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
BF
Belgium
Burkina Faso
GM
GN
Gambia
Guinea
MP
MQ
Northern Mariana Islands
Martinique (French)
TC
TD
Turks and Caicos Islands
Chad
BG
Bulgaria
GP
Guadeloupe
MR
Mauritania
TF
French Southern
BH
BI
Bahrain
Burundi
GQ
GR
Equatorial Guinea
Greece
MS
MT
Montserrat
Malta
TG
Territories
Togo
BJ
Benin
GS
S, Georgia & S, Sandwich
MU
Mauritfus
TH
Thailand
BM
BN
Bermuda
Brunef Darussalam
GT
Isis,
Guatemala
MV
MW
Maldives
Malawi
TJ
TK
Tadjikistan
Tokelau
BO
Bolivia
GU
Guam (USA)
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
Malaysia
TN
Tunisia
BS
BT
Bahamas
Bhutan
GY
HK
Guyana
Hong Kong
MZ
NA
Mozambique
Namibia
TO
TP
Tonga
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
BY
Botswana
Belarus
HN
Islands
Honduras
NE
NF
Niger
Norfolk island
TT
TV
Trinidad and Tobago
Tuvalu
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haitf
NI
Nicaragua
TZ
Tanzania
CC
CF
Cocos (Keeling) Islands
Central African Republic
HU
ID
Hungary
Indonesia
NL
NO
Netherlands
Norway
UA
UG
Ukraine
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United Kingdom
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor Outlying
C_
CK
Ivory Coast
Cook Islands
IN
IO
India
Britfsh Indian Ocean
NU
NZ
Niue
New Zealand
US
Islands
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
CN
Cameroon
China
IQ
IR
Iraq
Iran
PA
PE
Panama
Peru
UZ
VA
Uzbekistan
Vatican City State
CO
Colombia
IS
Iceland
PF
Polynesia
(French)
VC
Saint Vincent &
CR
CS
Costa Rfca
Former Czechoslovakia
IT
JM
Italy
Jamaica
PG
PH
Papua New Guinea
Philippines
VE
Grenadines
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
Virgin Islands (Britfsh)
CV
CX
Cape Verde
Christmas Island
JP
KE
Japan
Kenya
PL
PM
Poland
Saint Pierre and Miquelon
Vl
VN
Virgin Islands (USA)
Vietnam
CY
Cyprus
KG
Kyrgyzstan
PN
Pitcafrn Island
VU
Vanuatu
CZ
Czech Republic
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
DJ
Germany
Djiboutf
KI
KM
Kiribati
Comoros
PT
PW
Portugal
Palau
WS
YE
Samoa
Yemen
DK
Denmark
KN
Saint Kitts & Nevis Anguilla
PY
Paraguay
YT
Mayotte
DM
DO
Dominica
Dominican
KP
KR
North Korea
South Korea
QA
RE
Qatar
Reunion (French)
YU
ZA
Yugoslavia
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
EE
Ecuador
Estonia
KY
KZ
Cayman Islands
Kazakhstan
RU
RW
Russian Federation
Rwanda
ZR
ZW
Zaire
Zimbabwe
EG
EH
Egypt
Western Sahara
LA
LB
Laos
Lebanon
SA
SB
Saudi Arabia
Solomon Islands
Antilles
Samoa
Republic
Islands
(French)
(French)
and Jan Mayen
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Signal system
AC 120V, 60 Hz
74W
430 X 81 X 380 mm (17 x 3.2 x 14.9 inches) (w x h x d)
6 kg (13.2 Ibs)
5°C to 35°C (41°F to 95°F)
5 % to 90 %
NTSC
Inputs
ANTENNA
VCR VIDEO
VCR AUDIO
FM ANTENNA
AM ANTENNA
DiGiTAL AUDIO
iN
iN
iN
iN
iN
iN
Antenna or CATV input, 75 ohms
1 V (p-p) 75 ohms, sync negative, RCAiack x 2
-6.0 dBm more than 47 kohms, RCAiack (L, R) x 2
FM antenna input, 75 ohms
AM antenna input, 300 ohms
Optical connector x 1
Outputs
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (analog audio)
RF OUT
1 V (p-p) 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 ohms, sync negative, Mini DiN 4-pin x 1
(C) 0.286 V (p-p) 75 ohms
(Y) 1.0 V (p-p), 75 ohms, sync negative, RCAiack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCAiack x 2
2.0 Vrms (1 KHz, 0 dB), 330 ohms, RCAiack (L, R) x 1
Channel 3 or 4 (Adiustabb)
VCFt Specifications
Head system
Timer
Tape speed
Tape width
Maximum recording time
Rewind time
Antenna
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
Channel separation
4 head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
SP: 2 HOURS (1--120), SLP: 6 HOURS (1--120)/8 HOURS (1--160)
About 180 seconds (1--120)
75 ohms (VHF/UHF)
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+I _ W+84, A_5 _A-l)
20Hz to 20kHz
More than 43dB
More than 85 dB (AUDIO OUT iacks)
More than 55 dB (AUDIO OUT iacks)
DVD Specifications
Laser system
Frequency response
SignaPto-noise ratio
Harmonic distortion
Dynamic range
Semiconductor laser, wavelength 650 nm
DVD (PCM 48 kHz): 20 Hz to 20 kHz, CD: 20 Hz to 20 kHz
More than 80 dB (AUDIO OUT iacks)
Less than 0.4%
More than 80 dB (AUDIO OUT iacks)
FM Tuner
Tuning Range
intermediate Frequency
87.5 - 108.0 MHz
10.7 MHz
AM Tuner
Tuning Range
intermediate Frequency
530 - 1,720 kHz
450 kHz
Amplifier
Stereo mode
Surround mode
inputs
90W + 90W (6_",_
at 1 kHz, THD 10 %)
Front: 90W + 60W (6__ at 1 kHz, THD 10 %)
Center*: 90W (6£_2at 1 kHz, THD 10 %)
Surround*: 90W + 60W (6_)_at 1 kHz, THD 10 %)
Subwoofer*: 150W (40 at 30 Hz, THD 10 %)
*Dependingon the soundmodesettingsandthe source,theremay be no soundoutput.
LiNE 1, LiNE 2, OPTICAL iN
Speakers
Type
impedance
Frequency Response
Sound Pressure Level
Rated input Power
Max. input Power
Net Dimensions (W x H x D)
Net Weight
Satellite Speaker
2 Way 2 Speaker
6 Q
110 - 40,000 Hz
83 dB/W (1 m)
90 W
120 W
120 x 170 x 107 mm
0.94 kg
Center Speaker
2 Way 2 Speaker
6 ¢_
110 - 40,000 Hz
83 dB/W (1 m)
90 W
120 W
120 x 252 x 107 mm
1.07 kg
Passive Subwoofer
1 Way 1 Speaker
4 O
40 - 1,500 Hz
82 dB/W (1 m)
t50 W
200 W
200 x 400 x 381 mm
7.0 kg
Accessories:
Video cable ..................................
Audio cable ..................................
Ferrite core ...................................
RF 75-ohm Coaxial Cable ........................
Speakers ....................................
Speaker cables ................................
AM loop antenna ..............................
FM antenna ..................................
Remote control ................................
Batteries .....................................
® Design and specifications
Manufactured
Laboratories.
1
1
1
1
6
6
1
1
1
2
are subiect to change without notice.
under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are trademarks
i DTS and DTS Digital Surround are registered trademarks
of Digital Theater Systems, Inc.
of Dolby
Limited Warranty
DVD Players/Recorders
Toshiba America Consumer Products, LL.C. ("TACP't makes the fol!owing limited warranties to original consumers
in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER
OR ANY PERSON RECEIVING THIS DVD Player/Recorder AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
PRODUCTS
RANTIES.
PURCHASED
iN THE U.S.A. AND USED iN CANADAARE
PRODUCTS
RANTIES.
PURCHASED
iN CANADAAND
NOT COVERED
BY THESE WAR-
USED iN THE U.S.A. ARE NOT COVERED BY THESE WAR-
Limited Ninety (90) Day Warranty on Labor*
TACP warrant this DVD Player/Recorder and its parts
against defects in materials or workmanship for a period
of ninety (90) days after the date of original retai! purchase. DURING THIS PERIOD, TACP WILL, AT TACP's
OPTION, REPAIR OR REPLACE A DEFECTIVE PART
WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU FOR PARTS OR LABOR. YOU
MUST DELIVER THE ENTIRE DVD
PLAYER/RECORDER TO AN AUTHORIZED TACP
SERVICE STATION. YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES
FOR THE DVD PLAYER/RECORDER TO AND FROM
THE SERVICE STATION.
Limited One (1) Year Warranty on Parts*
TACP further warrant the parts in this DVD
Player/Recorder against defects in materials or workmanship for a period of one (1) year after the date of
original retail purchase. DURING THIS PERIOD, TACP
WILL, AT TACP's OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED
PART WITHOUT CHARGE TO YOU FOR THE PART,
PROVIDED THAT IF A DEFECTIVE PART IS
REPAIRED OR REPLACED AFTER N_NETY (90)
DAYS FROM THE DATE OF ORiGiNAL RETAIL PURCHASE, THE CONSUMER PAYS ALL LABOR
CHARGES iNVOLVED iN THE REPAIR OR
REPLACEMENT= YOU MUST DELIVER THE ENTIRE
DVD PLAYER/RECORDER TO AN AUTHORIZED
TACP SERVICE STATION. YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES
FOR THE DVD PLAYER/RECORDER TO AND FROM
THE SERVICE STATION.
*Rental Units
The warranty for renta! units begin with the first rental or
thirty (30) days from the date of shipment to the rental
firm, whichever comes first.
*Commercia_ Units
DVD PLAYER/RECORDER(s)
sold and used for commercial purposes have a limited ninety (90) day warranty.
Owner's BiJanuaJ and Demographic
Card
"You should read the owner's manual thoroughly before
operating this DVD PLAYER/RECORDER.
You should
complete and mail the enclosed Demographic card
within ten days after you, or the person who has given
you this product as a gift, purchased this DVD PLAYER/RECORDER. This is one way to enable TACP to
provide you with better customer service and improved
products. Failure to return the Demographic card will
not affect your rights under this warranty.
Your ResponsibiJity
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDiTiONS:
(1) "You must provide your bill of sale or other proof of
purchase.
(2) AI! in-warranty servicing of this DVD PLAYER/
RECORDER must be made by a specified
Authorized TACP Service Station.
(3) The warranties from TACP are effective only if the
DVD PLAYER/RECORDER
is purchased and operated in the U.S.A. or Puerto Rico.
(4) Labor service charges for set installation. Set up,
adjustment of customer controls and installation or
repair of hook up related items and/or antenna systems are not covered by these warranties.
Reception problems caused by inadequate antenna
systems are your responsibility.
(5) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to
any DVD PLAYER/RECORDER or parts which have
been lost or discarded by you or to damage to DVD
PLAYER/RECORDER or parts caused by misuse,
accident, Acts of God, such as lightning or fluctuations in electric power, improper installation, improper maintenance or use in violation of instructions furnished by TACP; or to units which have been modified or had the seria! number removed, altered,
defaced or rendered illegible.
Howto ObtainWarranty
Services
if,afterfollowing
alloftheoperating
instructions
inthis
manual
andchecking
thesection
"Troubleshooting",
you
findthatservice
isneeded:
(1) Forinstructions
onhowtoobtainwarranty
service
foryourDVDPlayer/Recorders,
contact
TACP
Call
Center's
tollfreenumber
at1-866-583-7353.
(2) "You
mustinclude
acopyororiginal
bil!ofsaleor
otherproofofpurchase
alongwiththeentireDVD
PLAYER/RECORDER
totheAuthorized
TACP
Service
Station
specified
bytheCallCenter.
"You
mustpayforalltransportation
andinsurance
charges
fortheDVDPLAYER/RECORDER
tothe
Service
Station.
Foradditional
information,
visitTACP's
website:
www.tacp.toshiba.com
Time for Taking Action
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A., INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
LIMITED TO THE DURATION OF THE LiMiTED WARRANTIES SET FORTH ABOVE. WiTH THE EXCEPTiON OF ANY WARRANTIES iMPLiED BY THE LAW
OF ANY STATE OF THE U.S.A. AS HEREBY LiMiTED,
THE FOREGOING WARRANTY IS EXCLUSIVE AND
iN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS AND SiMiLAR OBLIGATIONS
OF TACP WITH RESPECT TO THE REPAIR OR
REPLACEMENT OF ANY PARTS. iN NO EVENT
SHALL TACP OR BE LIABLE FOR CONSEQUENTIAL
OR iNCiDENTAL DAMAGES.
No person, agent distributor, dealer or company is
authorized to change, modify or extend the terms of
these warranties in any manner whatsoever, The time
within which action must be commenced to enforce any
obligation of TACP arising under this warranty or under
any law of the United States or of any state thereof is
hereby limited to 90 days from the date you discovered
or should have discovered, the defect. This limitation
does not apply to implied warranties arising under the
law of any state of the U.S.A.
HOW STATE LAW RELATES TO WARRANTY
THiS WARRANTY GIVES YOU SPECiFiC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH MAY VARY FROM STATE TO STATE iN THE
U.S.A. SOME STATES OF THE U.S.A. DO NOT
ALLOW LIMiTATiONS ON HOW LONG AN iMPLiED
WARRANTY LASTS, WHEN AN ACTION MAY BE
BROUGHT, OR THE EXCLUSION OR LiMITATiON OF
iNCiDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LiMITATiONS OR EXCLUSIONS MAY
NOT APPLY TO YOU UNDER SUCH CiRCUMSTANCES.
P/NO:3834RH0033K
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement