Barcode Reader Series BCL 31, BCL 32, BCL 34
Barcode Reader Series
BCL 31, BCL 32, BCL 34
P R O D U C T I N F O R M AT I O N
BCL 31, BCL 32 and BCL 34:
Barcode readers for universal use
in conveyor and storage technology.
3 models: numerous advantages.
This technically mature family of barcode readers offers the user an excellent
range of reliable line and raster scanners.
High scanning rates, very small installation dimensions and reliable function are
characteristics shared by all three models. The additional features of each type
ensure perfect solutions to individual problems.
Shared advantages:
Scanning rate of up to 1000 scans/
s for line or raster scanners
Switching outputs
For reliable detection with fast applications.
devices.
Reference code
Reads all common code types
Perfect solutions for a wide range of sorting
2/5 Interleaved, Code 39, UPC (A, E),
tasks.
EAN (8,13), EAN Adendum, Code 128, EAN 128,
Up to two switching outputs for controlling various
Codabar, Code 93, Pharma Code.
Simple mounting
Particularly fast and reliable through the use of a
Ink-jet model
dovetail connection.
This BCL model is equipped with optics which
are specially designed for ink-jet barcodes printed
Shallow installation depth and a
minimum read distance of 10 millimetres
directly on cardboard. As a result, it is possible to
obtain optimal read results even in this problematic
application area.
For use in limited spaces, e.g. between two roller
conveyors.
Heating
For applications in refrigerated areas, all optics
Switching inputs
Up to two switching inputs for activating the scanner as well as for starting teach-in events.
models are also optionally available with heating.
Connection options.
BCL 31
BCL 32
BCL 34
MA 2
KB 031
KB 031
KB 040 direct
KB 040 direct
MA 2L
MA 4 1xx L
KB 040 direct
MA 4 1xx
KB 031
MA 4D 1xx
KB 031
MA 4/MA 4D
KB 031
MA 42 IS/MA 42
DP-k
KB 031
KB 031
MS 34 103
direct
MS 34 105
direct
MSD 1 101
KB 034 only with MS 34 105
Barcode readers BCL 31, BCL 32
Stand-alone operation or network.
The use of a connector unit simplifies the electrical installation
of the barcode reader in stand-alone operation.
Moreover, the operating parameters are also stored in the MA
4/MA 4D connector units.
Networking the BCL 31 in multiNet plus.
Up to 30 scanners can be networked together using the
MA 2, MA 4 or MA 4D connector units and an MA 30/31 bus
master. For this purpose, each BCL 31 is assigned its own
The scanners with serial interfaces
RS 485 and RS 232.
hardware address in the corresponding connector unit.
The networking is carried out by simply wiring through the
individual RS 485 interfaces. Using this method, networks
Depending on requirements, the BCL 31 or BCL 32 can be
may extend up to 1200 m.
operated either as a stand-alone device or networked in the
Leuze multiNet. The BCL can also be integrated via the MA
The network is connected to the primary computer via the
42 IS, MA 42 IS PDP gateways to Interbus. With the MS 31
host interface of the MA 30/31.
105 (for the BCL 31) and the MS 32 104 (for the BCL 32) modular hoods with integrated connectors, the barcode readers
Available for this are plug-in modules for RS 422, RS 232,
can be easily wired using the M 12 connection system.
TTY or RS 485.
Stand-alone operation
The barcode reader features a 15-pin sub-D connector for
the electrical connection of the supply voltage, the interface
and the switching inputs.
MS 31 105
MS 32 104
Barcode reader BCL 34
Scanners with
inside.
Configuration with as many as 43 modules.
If necessary, an additional 43 modules can be included in
the project. E.g. result and control modules or statistics and
alignment modules which simplify mechanical alignment of
the scanner and monitor its fault-free operation.
Economical BCL PROFIBUS solution
By eliminating the PROFIBUS gateway and its RS 232 components, it was possible to considerably reduce the costs of
The scanner especially for the
PROFIBUS interface.
the entire system.
Plug and Play
Maximum transmission rate 12 MBd
Configuration performed by the control during device installa-
The BCL 34 enables the full PROFIBUS transmission speed.
tion. By means of this functionality, it is possible to exchange
a scanner in just seconds without any special technical
Direct configuration
knowledge.
All important parameters are set centrally via the PROFIBUS
project.
PROFIBUS diagnostics includes BCL 34.
The scanner state can be monitored directly by the PROFIBUS
No other configuration tools necessary.
diagnostics tool.
The programmer works only with the software tool of the
PROFIBUS DP master, a tool with which he is already familiar.
BCL 34 accessories (necessary for the PROFIBUS connection)
M 34 103 with
M 12 connector for:
• PROFIBUS DP IN/OUT
• Voltage supply
PWR IN
M 34 105 with
M 12 connector for:
• PROFIBUS DP IN/OUT
• Voltage supply
PWR IN
• Switching input and output
SW IN/OUT
• Modular Service Display MSD
Specifications
Optical data
BCL 31/32
BCL 34
Light source
Laser safety class
Scanning rate and resolution
laser diode 650 nm
class 2 acc. to IEC 60825-1
BCL with M optics: 1000 scans/s
module m = 0.2 mm ... 0.5 mm
BCL with F optics: 800 scans/s
module m = 0.3 mm ... 0.8 mm
BCL with L optics: 800 scans/s
module m = 0.35 mm ... 0.8 mm
BCL with J optics: 1000 scans/s*
module m = dependent on application
all optics models available with heating
raster or line scanner
see reading curves
laser diode 650 nm
class 2 acc. to IEC 60825-1
BCL with M optics: 1000 scans/s
module m = 0.2 mm ... 0.5 mm
BCL with F optics: 800 scans/s
module m = 0.3 mm ... 0.8 mm
BCL with L optics: 800 scans/s
module m = 0.35 mm ... 0.8 mm
BCL with J optics: 1000 scans/s*
module m = dependent on application
all optics models available with heating
raster or line scanner
see reading curves
all common code types
selectable output format, autoConfig, autoControl,
reference code comparison, multiple read, real time
decoding, alignment mode, diagnosis, reading gate
control,
control of the switching inputs and outputs etc.
all common code types
selectable output format, autoControl, reference code
comparison, multiple read, real time decoding,
alignment mode, diagnostics, reading gate control,
control of the switching inputs and outputs etc.
BCL 31: RS 485
BCL 32: RS 232
110 ... 115 400 Bd
with/without framing protocol
via service interface
BCL 31: 1 switching output, 1 switching input
BCL 32: 2 switching outputs, 2 switching inputs
PROFIBUS DP
10 ... 30 V DC
3.2 W
10 ... 30 V DC
5W
IP 65
400 g
120 x 90 x 43 mm
diecast aluminium
IP 65
405 g
120 x 90 x 43 mm
diecast aluminium
0 °C ... +40 °C/-20 °C ... +60 °C
0 °C ... +40 °C/-20 °C ... +60 °C
max. 90% rel. humidity, non-condensing
IEC 60068-2-6, FC test
IEC 60068-2-27, Ea test
EN 61326-1
EN 61000-6-2
EN 61000-6-3
MA 2, MA 2.2, MA 4, MA 4 D, MA 22 DC
MS 31 105 (for BCL 31)
MS 32 104 (for BCL 32)
max. 90% rel. humidity, non-condensing
IEC 60068-2-6, FC test
IEC 60068-2-27, Ea test
EN 61326-1
EN 61000-6-2
EN 61000-6-3
MS 34 103, MS 34 105
Scan lines
Reading fields
Software
Code types
Software features
Electrical data
Interface type
Baud rate
Protocol
Configuration
Ports
Indicators
Operating voltage
Power consumption
Mechanical data
Protection class
Weight
Dimensions (W x H x D)
Housing
Environmental data
Ambient temperature
operation/storage
Air humidity
Vibration
Shock
EMC
Accessories
9.6 kBd –12 MBd
PROFIBUS DP
via PROFIBUS DP
1 switching output, 1 switching input
The specified reading curve applies to the standard case: black on white, sharp contours, homogeneously printed code.
The actual reading field for an ink-jet application must be checked for the respective application.
Reading curves
Reading field height in mm
BCL 31, BCL 32 and BCL 34 type M with 1000 scans/s
Distance in mm
– m = 0.2
– m = 0.3
– m = 0.5
Reading field height in mm
BCL 31, BCL 32 and BCL 34 type F with 800 scans/s
Distance in mm
BCL 31, BCL 32 and BCL 34 type L with 800 scans/s
Reading field height in mm
Reading field height in mm
BCL 31, BCL 32 and BCL 34 type J with 1000 scans/s
– m = 0.3
– m = 0.5
– m = 0.8
Distance in mm
Reading curves for heating devices on request
– m = 0.5
– m = 0.8
Distance in mm
– m = 0.35
– m = 0.5
– m = 0.8
Optical Electronic Sensors
Cubic Series
Cylindrical Sensors, Mini Photoelectric Sensors, Fibre Optic Amplifiers
Measuring Sensors
Special Sensors
Light Curtains
Forked Sensors
Double Sheet Testing Unit, Splice Detection
Accessories
Identification Systems
Data Transmission Systems
Distance Measurement
Barcode Readers
RF IDent Systems
Modular Connector Units
Industrial Image Processing Systems
Optical Data Transmission Systems
Optical Distance Measurement/Positioning
Hand-Held Readers
Safety Sensors
Safety Systems
Safety Services
Leuze electronic GmbH + Co. KG
In der Braike 1
D-73277 Owen
Phone +49 (0) 7021 / 573-0
Fax +49 (0) 7021 / 573-199
[email protected]
www.leuze.com
GB 169/03-08/07 50039006
Safety Laser Scanners
Safety Light Curtains
Transceivers and Multi-Beam Safety Photoelectric Sensors
Single-Beam Safety Photoelectric Sensors
AS-i-Safety Product Line
Safety Sensors for the PROFIBUS DP
Safety Switches and Locks
Safety Relays and Interfaces
Sensor Accessories and Signal Devices
Machine Safety Services
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement