Lenovo ideapad FLEX 5-1470 Lenovo ideapad FLEX 5

Lenovo ideapad FLEX 5-1470 Lenovo ideapad FLEX 5
Lenovo ideapad
FLEX 5-1470
Lenovo ideapad
FLEX 5-1570
Hardware
Maintenance
Manual
Notes:
• Before using this information and the product it supports, be sure to read the general information under
“Notices” on page 77.
• This manual applies to the following models: Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570.
The illustrations used in this manual are for Lenovo ideapad FLEX 5-1470 unless otherwise stated.
First Edition (March 2017)
© Copyright Lenovo 2017. All rights reserved.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General
Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set
forth in Contract No. GS-35F-05925.
© 2017 Lenovo
Contents
About this manual........................................ iv
Safety information......................................... 1
General safety................................................. 2
Electrical safety............................................... 3
Safety inspection guide................................... 5
Handling devices that are sensitive to
electrostatic discharge..................................... 6
Grounding requirements.................................. 6
Safety notices: multilingual translations.......... 7
Laser compliance statement......................... 14
Important service information.................... 16
Strategy for replacing FRUs.......................... 16
Strategy for replacing a hard disk drive.............17
Important notice for replacing a system
board ................................................................17
Important information about replacing
RoHS compliant FRUs.................................. 18
General checkout ....................................... 19
What to do first.............................................. 20
Power system checkout................................ 21
Checking the AC adapter ..................................21
Checking operational charging..........................22
Checking the battery pack.................................22
1040 Hard disk drive..........................................35
1050 PCI Express Mini Card for wireless
LAN....................................................................36
1060 Speakers..................................................38
1070 DIMM........................................................39
1080 Fan and Heat Sink assembly....................41
1090 IO board....................................................44
1100 System board............................................46
1110 Upper case ...............................................48
1120 DC-in cable...............................................50
1130 LCD unit....................................................51
1140 Camera board, sensor board and
EDP cable..........................................................54
1150 LCD hinges...............................................58
1160 Fingerprint module (on select models).......60
Locations....................................................... 62
Front and right-side view...................................62
Bottom and left-side view .................................63
Rear view ..........................................................64
Parts list......................................................... 65
Overall...............................................................66
LCD FRUs.........................................................71
Miscellaneous parts...........................................72
AC adapters.......................................................73
Screws...............................................................73
Power cords.......................................................74
Notices......................................................... 77
Trademarks................................................... 78
Related service information....................... 23
Restoring the factory contents by using
OneKey Recovery......................................... 23
Restore of factory default..................................23
Passwords..................................................... 24
Power-on password...........................................24
Hard-disk password...........................................24
Supervisor password.........................................24
Power management...................................... 25
Putting the computer to sleep or shutting
it down...............................................................25
Putting your computer to sleep..........................25
Shutting down the computer..............................25
Lenovo ideapad FLEX 5-1470/Lenovo
ideapad FLEX 5-1570.................................. 26
Specifications................................................ 26
Status indicators............................................ 27
Keyboard function keys................................. 28
FRU replacement notices.............................. 29
Screw notices ...................................................29
Removing and replacing an FRU.................. 30
1010 Base cover................................................31
1020 Battery pack..............................................33
1030 Solid state disk.........................................34
iii
About this manual
This manual contains service and reference information for the following
Lenovo products:
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Use this manual to troubleshoot problems.
The manual is divided into the following sections:
• The common sections provide general information, guidelines, and safety
information required for servicing computers.
• The product-specific section includes service, reference, and product-specific
parts information.
Important:
This manual is intended only for trained servicers who are familiar with Lenovo
products. Use this manual to troubleshoot problems effectively.
Before servicing a Lenovo product, make sure to read all the information under
“Safety information” on page 1 and “Important service information” on page 16.
iv
Safety information
Safety information
This chapter presents the following safety information that you need to get
familiar with before you service a Lenovo ideapad FLEX 5-1470/Lenovo ideapad
FLEX 5-1570 computer:
• “General safety” on page 2
• “Electrical safety” on page 3
• “Safety inspection guide” on page 5
• “Handling devices that are sensitive to electrostatic discharge” on page 6
• “Grounding requirements” on page 6
• “Safety notices: multilingual translations” on page 7
• “Laser compliance statement” on page 14
1
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
General safety
Follow these rules below to ensure general safety:
• Observe a good housekeeping in the area where the machines are put
during and after the maintenance.
• When lifting any heavy object:
1. Make sure that you can stand safely without slipping.
2. Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you attempt
to lift it.
4. Lift it by standing or pushing up with your leg muscles; this action could
avoid the strain from the muscles in your back. Do not attempt to lift any
object that weighs more than 16 kg (35 lb) or that you think is too heavy
for you.
• Do not perform any action that causes hazards to the customer, or that
makes the machine unsafe.
• Before you start the machine, make sure that other service representatives
and the customer are not in a hazardous position.
• Please remove covers and other parts in a safe place, away from all
personnel, while you are servicing the machine.
• Keep your toolcase away from walk areas so that other people will not trip
over it.
• Do not wear loose clothing that can be trapped in the moving parts of the
machine. Make sure that your sleeves are fastened or rolled up above your
elbows. If your hair is long, fasten it.
• Insert the ends of your necktie or scarf inside clothing or fasten it with the
nonconductive clip, about 8 centimeters (3 inches) from the end.
• Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for
your clothing.
Attention: Metal objects are good electrical conductors.
• Wear safety glasses when you are hammering, drilling, soldering, cutting
wire, attaching springs, using solvents, or working in any other conditions
that may be hazardous to your eyes.
• After service, reinstall all safety shields, guards, labels, and ground wires.
Replace any safety device that is worn or defective.
• Reinstall all covers correctly before returning the machine to the customer.
• Fan louvers on the machine help to prevent the overheating of internal
components. Do not obstruct fan louvers or cover them with labels or
stickers.
2
Safety information
Electrical safety
Observe the following rules when working on electrical equipments.
Important:
Use only approved tools and test equipments. Some hand tools have handles
covered with a soft material that does not insulate you when working with live
electrical currents.
Many customers have rubber floor mats near their machines that contain small
conductive fibers to decrease electrostatic discharges. Do not use such kind of mat
to protect yourself from electrical shock.
• Find the room emergency power-off (EPO) switch, disconnecting switch or
electrical outlet. If an electrical accident occurs, you can then operate the
switch or unplug the power cord quickly.
• Do not work alone under hazardous conditions or near the equipment that
has hazardous voltages.
• Disconnect all power before:
– Performing a mechanical inspection
– Working near power supplies
– Removing or installing main units
• Before you start to work on the machine, unplug the power cord. If you
cannot unplug it, ask the customer to power-off the wall box that supplies
power to the machine, and to lock the wall box in the off position.
• If you need to work on a machine that has exposed electrical circuits,
observe the following precautions:
– Ensure that another person, familiar with the power-off controls, is near
you.
Attention: Another person must be there to switch off the power, if
necessary.
– Use only one hand when working with powered-on electrical equipment;
keep the other hand in your pocket or behind your back.
Attention: An electrical shock can occur only when there is a complete
circuit. By observing the above rule, you may prevent a current from
passing through your body.
– When using testers, set the controls correctly and use the approved
probe leads and accessories for that tester.
– Stand on suitable rubber mats (obtained locally, if necessary) to insulate
you from grounds such as metal floor strips and machine frames.
Observe the special safety precautions when you work with very high voltages;
instructions for these precautions are in the safety sections of maintenance
information. Be extremely careful when you measure the high voltages.
• Regularly inspect and maintain your electrical hand tools for safe operational
condition.
• Do not use worn or broken tools and testers.
• Never assume that power has been disconnected from a circuit. First, check
it to make sure that it has been powered off.
3
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
• Always look carefully for possible hazards in your work area. Examples of
these hazards are moist floors, nongrounded power extension cables, power
surges, and missing safety grounds.
• Do not touch live electrical circuits with the reflective surface of a plastic
dental mirror. The surface is conductive; such touching can cause personal
injury and machine damage.
• Do not service the following parts with the power on when they are removed
from their normal operating places in a machine:
– Power supply units
–Pumps
– Blowers and fans
– Motor generators
and similar units. (This practice ensures correct grounding of the units.)
• If an electrical accident occurs:
– Caution: do not become a victim yourself.
– Switch off the power.
– Send the victim to get medical aid.
4
Safety information
Safety inspection guide
The purpose of this inspection guide is to assist you in identifying potential
unsafe conditions. As each machine was designed and built, required safety
items were installed to protect users and service personnel from injury. This
guide addresses only those items. You should use good judgment to identify
potential safety hazards according to the attachment of non-Lenovo features or
options not covered by this inspection guide.
If any unsafe conditions are present, you must determine how serious the
apparent hazard could be and whether you can continue without first correcting
the problem.
Consider these conditions and the safety hazards they present:
• Electrical hazards, especially primary power (primary voltage on the frame
can cause serious or fatal electrical shock)
• Explosive hazards, such as a damaged CRT face or a bulging capacitor
• Mechanical hazards, such as loose or missing hardware
To determine whether there are any potential unsafe conditions, use the
following checklist at the beginning of every service task. Begin the checks with
the power off, and the power cord disconnected.
Checklist:
1. Check exterior covers for damage (loose, broken, or sharp edges).
2. Turn off the computer. Disconnect the power cord.
3. Check the power cord for:
a. A third-wire ground connector in good condition. Use a meter to measure
third-wire ground continuity for 0.1 ohm or less between the external
ground pin and the frame ground.
b. The power cord should be the type specified in the parts list.
c. Insulation must not be frayed or worn.
4. Check for cracked or bulging batteries.
5. Remove the cover.
6. Check for any obvious non-Lenovo alterations. Use good judgment as to the
safety of any non-Lenovo alterations.
7. Check inside the unit for any obvious unsafe conditions, such as metal
filings, contamination, water or other liquids, or signs of fire or smoke
damage.
8. Check for worn, frayed, or pinched cables.
9. Check that the power-supply cover fasteners (screws or rivets) have not
been removed or tampered with.
5
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Handling devices that are sensitive to electrostatic discharge
Any computer part containing transistors or integrated circuits (ICs) should be
considered sensitive to electrostatic discharge (ESD). ESD damage can occur
when there is a difference in charge between objects. Protect against ESD
damage by equalizing the charge so that the machine, the part, the work mat,
and the person handling the part are all at the same charge.
Notes:
1. Use product-specific ESD procedures when they exceed the requirements
noted here.
2. Make sure that the ESD protective devices you use have been certified (ISO
9000) as fully effective.
When handling ESD-sensitive parts:
• Keep the parts in protective packages until they are inserted into the product.
• Avoid contact with other people.
• Wear a grounded wrist strap against your skin to eliminate static on your
body.
• Prevent the part from touching your clothing. Most clothing is insulative and
retains a charge even when you are wearing a wrist strap.
• Use the black side of a grounded work mat to provide a static-free work
surface. The mat is especially useful when handling ESD-sensitive devices.
• Select a grounding system, such as those listed below, to provide protection
that meets the specific service requirement.
Note:
The use of a grounding system to guard against ESD damage is desirable but not
necessary.
– Attach the ESD ground clip to any frame ground, ground braid, or greenwire ground.
– When working on a double-insulated or battery-operated system, use an
ESD common ground or reference point. You can use coax or connectoroutside shells on these systems.
– Use the round ground prong of the ac plug on ac-operated computers.
Grounding requirements
Electrical grounding of the computer is required for operator safety and correct
system function. Proper grounding of the electrical outlet can be verified by a
certified electrician.
6
Safety information
Safety notices: multilingual translations
The safety notices in this section are provided in English, French, German,
Hebrew, Italian, Japanese, and Spanish.
Safety notice 1
Before the computer is powered on after FRU replacement, make sure all screws,
springs, and other small parts are in place and are not left loose inside the
computer. Verify this by shaking the computer and listening for rattling sounds.
Metallic parts or metal flakes can cause electrical shorts.
Avant de remettre l’ordinateur sous tension après remplacement d’une unité en
clientèle, vérifiez que tous les ressorts, vis et autres pièces sont bien en place et
bien fixées. Pour ce faire, secouez l’unité et assurez-vous qu’aucun bruit suspect
ne se produit. Des pièces métalliques ou des copeaux de métal pourraient causer
un court-circuit.
Bevor nach einem FRU-Austausch der Computer wieder angeschlossen wird,
muß sichergestellt werden, daß keine Schrauben, Federn oder andere Kleinteile
fehlen oder im Gehäuse vergessen wurden. Der Computer muß geschüttelt und auf
Klappergeräusche geprüft werden. Metallteile oder-splitter können Kurzschlüsse
erzeugen.
Prima di accendere l’elaboratore dopo che é stata effettuata la sostituzione di una
FRU, accertarsi che tutte le viti, le molle e tutte le altri parti di piccole dimensioni
siano nella corretta posizione e non siano sparse all’interno dell’elaboratore.
Verificare ciò scuotendo l’elaboratore e prestando attenzione ad eventuali rumori;
eventuali parti o pezzetti metallici possono provocare cortocircuiti pericolosi.
Antes de encender el sistema despues de sustituir una FRU, compruebe que
todos los tornillos, muelles y demás piezas pequeñas se encuentran en su sitio
y no se encuentran sueltas dentro del sistema. Compruébelo agitando el sistema
y escuchando los posibles ruidos que provocarían. Las piezas metálicas pueden
causar cortocircuitos eléctricos.
7
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Safety notice 2
DANGER
Some standby batteries contain a small amount of nickel and cadmium. Do not
disassemble a standby battery, recharge it, throw it into fire or water, or shortcircuit it. Dispose of the battery as required by local ordinances or regulations.
Use only the battery in the appropriate parts listing. Use of an incorrect battery can
result in ignition or explosion of the battery.
Certaines batteries de secours contiennent du nickel et du cadmium. Ne les
démontez pas, ne les rechargez pas, ne les exposez ni au feu ni à l’eau. Ne
les mettez pas en court-circuit. Pour les mettre au rebut, conformez-vous à la
réglementation en vigueur. Lorsque vous remplacez la pile de sauvegarde ou celle
de l’horloge temps réel, veillez à n’utiliser que les modèles cités dans la liste de
pièces détachées adéquate. Une batterie ou une pile inappropriée risque de prendre
feu ou d’exploser.
Die Bereitschaftsbatterie, die sich unter dem Diskettenlaufwerk befindet,
kann geringe Mengen Nickel und Cadmium enthalten. Sie darf nicht zerlegt,
wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden.
Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim
Ersetzen der Bereitschafts-oder Systembatterie nur Batterien des Typs verwenden,
der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu
Entzündung oder Explosion führen.
Alcune batterie di riserva contengono una piccola quantità di nichel e cadmio.
Non smontarle, ricaricarle, gettarle nel fuoco o nell’acqua né cortocircuitarle.
Smaltirle secondo la normativa in vigore (DPR 915/82, successive disposizioni e
disposizioni locali). Quando si sostituisce la batteria dell’RTC (real time clock) o
la batteria di supporto, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo
parti. L’impiego di una batteria non adatta potrebbe determinare l’incendio o
l’esplosione della batteria stessa.
Algunas baterías de reserva contienen una pequeña cantidad de níquel y cadmio.
No las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite.
Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se
encuentren en la lista de piezas. La utilización de una batería no apropiada puede
provocar la ignición o explosión de la misma.
8
Safety information
Safety notice 3
DANGER
The battery pack contains small amounts of nickel. Do not disassemble it, throw
it into fire or water, or short-circuit it. Dispose of the battery pack as required by
local ordinances or regulations. Use only the battery in the appropriate parts listing
when replacing the battery pack. Use of an incorrect battery can result in ignition
or explosion of the battery.
La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.
Ne la mettez pas en court-circuit. Pour la mettre au rebut, conformez-vous à la
réglementation en vigueur. Lorsque vous remplacez la batterie, veillez à n’utiliser
que les modèles cités dans la liste de pièces détachées adéquate. En effet, une
batterie inappropriée risque de prendre feu ou d’exploser.
Akkus enthalten geringe Mengen von Nickel. Sie dürfen nicht zerlegt,
wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden.
Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim
Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste
aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion
führen.
La batteria contiene piccole quantità di nichel. Non smontarla, gettarla nel fuoco
o nell’acqua né cortocircuitarla. Smaltirla secondo la normativa in vigore (DPR
915/82, successive disposizioni e disposizioni locali). Quando si sostituisce la
batteria, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego
di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della
batteria stessa.
Las baterías contienen pequeñas cantidades de níquel. No las desmonte, ni
recargue, ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como
dispone la normativa local. Utilice sólo baterías que se encuentren en la lista de
piezas al sustituir la batería. La utilización de una batería no apropiada puede
provocar la ignición o explosión de la misma.
9
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Safety notice 4
DANGER
The lithium battery can cause a fire, an explosion, or a severe burn. Do not
recharge it, remove its polarized connector, disassemble it, heat it above 100°C
(212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as
required by local ordinances or regulations. Use only the battery in the appropriate
parts listing. Use of an incorrect battery can result in ignition or explosion of the
battery.
La pile de sauvegarde contient du lithium. Elle présente des risques d’incendie,
d’explosion ou de brûlures graves. Ne la rechargez pas, ne retirez pas son
connecteur polarisé et ne la démontez pas. Ne l’exposez pas à une temperature
supérieure à 100°C, ne la faites pas brûler et n’en exposez pas le contenu à l’eau.
Mettez la pile au rebut conformément à la réglementation en vigueur. Une pile
inappropriée risque de prendre feu ou d’exploser.
Die Systembatterie ist eine Lithiumbatterie. Sie kann sich entzünden, explodieren
oder schwere Verbrennungen hervorrufen. Batterien dieses Typs dürfen nicht
aufgeladen, zerlegt, über 100 C erhitzt oder verbrannt werden. Auch darf ihr
Inhalt nicht mit Wasser in Verbindung gebracht oder der zur richtigen Polung
angebrachte Verbindungsstecker entfernt werden. Bei der Entsorgung die örtlichen
Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien
des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher
Batterien kann zu Entzündung oder Explosion führen.
La batteria di supporto e una batteria al litio e puo incendiarsi, esplodere o
procurare gravi ustioni. Evitare di ricaricarla, smontarne il connettore polarizzato,
smontarla, riscaldarla ad una temperatura superiore ai 100 gradi centigradi,
incendiarla o gettarla in acqua. Smaltirla secondo la normativa in vigore (DPR
915/82, successive disposizioni e disposizioni locali). L’impiego di una batteria
non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa.
La batería de repuesto es una batería de litio y puede provocar incendios,
explosiones o quemaduras graves. No la recargue, ni quite el conector polarizado,
ni la desmonte, ni caliente por encima de los 100°C (212°F), ni la incinere ni
exponga el contenido de sus celdas al agua. Deséchela tal como dispone la
normativa local.
10
Safety information
Safety notice 5
If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your
hands, immediately wash the affected areas with water at least for 15 minutes.
Seek medical care if any symptoms caused by the fluid are present after washing.
Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les
yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au
moins quinze minutes. Consultez un médecin si des symptômes persistent après le
lavage.
Die Leuchtstoffröhre im LCD-Bildschirm enthält Quecksilber. Bei der Entsorgung
die örtlichen Bestimmungen für Sondermüll beachten. Der LCD-Bildschirm
besteht aus Glas und kann zerbrechen, wenn er unsachgemäß behandelt wird
oder der Computer auf den Boden fällt. Wenn der Bildschirm beschädigt ist und
die darin befindliche Flüssigkeit in Kontakt mit Haut und Augen gerät, sollten
die betroffenen Stellen mindestens 15 Minuten mit Wasser abgespült und bei
Beschwerden anschließend ein Arzt aufgesucht werden.
Nel caso che caso l’LCD si dovesse rompere ed il liquido in esso contenuto
entrasse in contatto con gli occhi o le mani, lavare immediatamente le parti
interessate con acqua corrente per almeno 15 minuti; poi consultare un medico se i
sintomi dovessero permanere.
Si la LCD se rompe y el fluido de su interior entra en contacto con sus ojos o sus
manos, lave inmediatamente las áreas afectadas con agua durante 15 minutos
como mínimo. Obtenga atención medica si se presenta algún síntoma del fluido
despues de lavarse.
11
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Safety notice 6
DANGER
To avoid shock, do not remove the plastic cover that protects the lower part of the
inverter card.
Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique
protégeant la partie inférieure de la carte d’alimentation.
Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der
Spannungswandlerplatine umgibt, nicht entfernen.
Per evitare scosse elettriche, non rimuovere la copertura in plastica che avvolge la
parte inferiore della scheda invertitore.
Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la
tarjeta invertida.
Safety notice 7
DANGER
Though the main batteries have low voltage, a shorted or grounded battery can
produce enough current to burn personnel or combustible materials.
Bien que le voltage des batteries principales soit peu élevé, le court-circuit ou la
mise à la masse d’une batterie peut produire suffisamment de courant pour brûler
des matériaux combustibles ou causer des brûlures corporelles graves.
Obwohl Hauptbatterien eine niedrige Spannung haben, können sie doch bei
Kurzschluß oder Erdung genug Strom abgeben, um brennbare Materialien zu
entzünden oder Verletzungen bei Personen hervorzurufen.
Sebbene le batterie di alimentazione siano a basso voltaggio, una batteria in
corto circuito o a massa può fornire corrente sufficiente da bruciare materiali
combustibili o provocare ustioni ai tecnici di manutenzione.
Aunque las baterías principales tienen un voltaje bajo, una batería cortocircuitada
o con contacto a tierra puede producir la corriente suficiente como para quemar
material combustible o provocar quemaduras en el personal.
12
Safety information
Safety notice 8
DANGER
Before removing any FRU, turn off the computer, unplug all power cords from
electrical outlets, remove the battery pack, and then disconnect any interconnecting
cables.
Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension,
débranchez tous les cordons d’alimentation des socles de prise de courant, retirez
la batterie et déconnectez tous les cordons d’interface.
Die Stromzufuhr muß abgeschaltet, alle Stromkabel aus der Steckdose gezogen,
der Akku entfernt und alle Verbindungskabel abgenommen sein, bevor eine FRU
entfernt wird.
Prima di rimuovere qualsiasi FRU, spegnere il sistema, scollegare dalle prese
elettriche tutti i cavi di alimentazione, rimuovere la batteria e poi scollegare i cavi
di interconnessione.
Antes de quitar una FRU, apague el sistema, desenchufe todos los cables de
las tomas de corriente eléctrica, quite la batería y, a continuación, desconecte
cualquier cable de conexión entre dispositivos.
13
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Laser compliance statement
Some models of Lenovo computer are equipped from the factory with an
optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such
devices are also sold separately as options. If one of these drives is installed,
it is certified in the U.S. to conform to the requirements of the Department of
Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR)
Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to
conform to the requirements of the International Electrotechnical Commission
(IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.
If a CD-ROM drive, a DVD-ROM drive, or another laser device is installed, note
the following:
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
O uso de controles, ajustes ou desempenho de procedimentos diferentes daqueles
aqui especificados pode resultar em perigosa exposição à radiação.
Pour éviter tout risque d’exposition au rayon laser, respectez les consignes de
réglage et d’utilisation des commandes, ainsi que les procédures décrites.
Werden Steuer- und Einstellelemente anders als hier festgesetzt verwendet, kann
gefährliche Laserstrahlung auftreten.
L’utilizzo di controlli, regolazioni o l’esecuzione di procedure diverse da quelle
specificate possono provocare l’esposizione a.
El uso de controles o ajustes o la ejecución de procedimientos distintos de los aquí
especificados puede provocar la exposición a radiaciones peligrosas.
Opening the CD-ROM drive, the DVD-ROM drive, or any other optical storage
device could result in exposure to hazardous laser radiation. There are no
serviceable parts inside those drives. Do not open.
14
Safety information
A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may
contain an embedded Class 3A or Class 3B laser diode. Note the following:
DANGER
Emits visible and invisible laser radiation when open. Do not stare into the beam,
do not view directly with optical instruments, and avoid direct exposure to the
beam.
Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe
diretamente por meio de instrumentos óticos e evite exposição direta com o feixe
de luz.
Rayonnement laser si carter ouvert. Évitez de fixer le faisceau, de le regarder
directement avec des instruments optiques, ou de vous exposer au rayon.
Laserstrahlung bei geöffnetem Gerät. Nicht direkt oder über optische Instrumente
in den Laserstrahl sehen und den Strahlungsbereich meiden.
Kinyitáskor lézersugár ! Ne nézzen bele se szabad szemmel, se optikai
eszközökkel. Kerülje a sugárnyalábbal való érintkezést!
Aprendo l’unità vengono emesse radiazioni laser. Non fissare il fascio, non
guardarlo direttamente con strumenti ottici e evitare l’esposizione diretta al fascio.
Radiación láser al abrir. No mire fijamente ni examine con instrumental óptico el
haz de luz. Evite la exposición directa al haz.
15
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Important service information
This chapter presents the following important service information:
• “Strategy for replacing FRUs” on page 16
– “Strategy for replacing a hard disk drive” on page 17
– “Important notice for replacing a system board” on page 17
• “Important information about replacing RoHS compliant FRUs” on page 18
Important:
BIOS and device driver fixes are customer-installable. The BIOS and device drivers
are posted on the customer support site:
http://support.lenovo.com.
Strategy for replacing FRUs
Before replacing parts:
Make sure that all software fixes, drivers, and BIOS downloads are installed
before replacing any FRUs listed in this manual.
After a system board is replaced, ensure that the latest BIOS is loaded to the
system board before completing the service action.
To download software fixes, drivers, and BIOS, follow the steps below:
1. Go to http://support.lenovo.com.
2. Enter the serial number or select a product or use Lenovo smart
downloading.
3. Select the BIOS/Driver/Applications and download.
4. Follow the directions on the screen and install the necessary software.
16
Important service information
Use the following strategy to prevent unnecessary expense for replacing and
servicing FRUs:
• If you are instructed to replace an FRU, but the replacement does not solve
the problem, reinstall the original FRU before you continue.
• Some computers have both a processor board and a system board. If you
are instructed to replace either of them, and replacing one of them does not
solve the problem, reinstall that board, and then replace the other one.
• If an adapter or a device consists of more than one FRU, any of the FRUs
may be the cause of the error. Before replacing the adapter or device,
remove the FRUs one by one to see if the symptoms change. Replace only
the FRU that changed the symptoms.
Attention: The setup configuration on the computer you are servicing may
have been customized. Running Automatic Configuration may alter the
settings. Note the current configuration settings (using the View Configuration
option); then, when service has been completed, verify that those settings
remain in effect.
Strategy for replacing a hard disk drive
Always try to run a low-level format before replacing a hard disk drive. This
will cause all customer data on the hard disk to be lost. Make sure that the
customer has a current backup of the data before performing this action.
Attention: The drive startup sequence in the computer you are servicing may
have been changed. Be extremely careful during write operations such as
copying, saving, or formatting. If you select an incorrect drive, data or programs
can be overwritten.
Important notice for replacing a system board
Some components mounted on a system board are very sensitive. Improper
handling can cause damage to those components, and may cause a system
malfunction.
Attention: When handling a system board:
• Do not drop the system board or apply any excessive force to it.
• Avoid rough handling of any kind.
• Avoid bending the system board and hard pushing to prevent cracking at
each BGA (Ball Grid Array) chipset.
17
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Important information about replacing RoHS compliant FRUs
RoHS, The Restriction of Hazardous Substances in Electrical and
Electronic Equipment Directive (2002/95/EC) is a European Union legal
requirement affecting the global electronics industry. RoHS requirements
must be implemented on Lenovo products placed on the market after
June 2006. Products on the market before June 2006 are not required to
have RoHS compliant parts. If the original FRU parts are non-compliant,
replacement parts can also be non-compliant. In all cases if the original
FRU parts are RoHS compliant, the replacement part must also be RoHS
compliant.
Note: RoHS and non-RoHS FRU part numbers with the same fit and function
are identified with unique FRU part numbers.
Lenovo plans to transit to RoHS compliance well before the implementation
date and expects its suppliers to be ready to support Lenovo’s requirements
and schedule in the EU. Products sold in 2005 and 2006 will contain some
RoHS compliant FRUs. The following statement pertains to these products and
any product Lenovo produces containing RoHS compliant FRUs.
RoHS compliant FRUs have unique FRU part numbers. Before or after the
RoHS implementation date, failed RoHS compliant parts must always be
replaced with RoHS compliant ones, so only the FRUs identified as compliant
in the system HMM or direct substitutions for those FRUs may be used.
Products marketed before June 2006
Products marketed after June 2006
Current or
original part
Replacement FRU Current or
original part
Non-RoHS
Can be Non-RoHS
Non-RoHS
Can be RoHS
Non-RoHS
Can sub to RoHS
RoHS
Must be RoHS
Must be RoHS
Replacement FRU
Must be RoHS
Note: A direct substitution is a part with a different FRU part number that is
automatically shipped by the distribution center at the time of the order.
18
General checkout
General checkout
This chapter presents the following information:
• “What to do first” on page 20
• “Power system checkout” on page 21
Before you go to the checkout, make sure to read the following important notes:
Important notes:
• Only certified trained personnel can service the computer.
• Before replacing any FRU, read the entire page on removing and replacing
FRUs.
• Carefully remove screws for reuse when replacing FRUs.
• Be extremely careful during such write operations as copying, saving, or
formatting. Drives in the computer that you are servicing sequence might
have been altered. If you select an incorrect drive, data or programs might be
overwritten.
• Replace an FRU only with another FRU of the correct model. When you
replace an FRU, make sure that the machine model and the FRU part number are
correct by referring to the FRU parts list.
• An FRU should not be replaced just because of a single, unreproducible failure.
Single failures can occur for a variety of reasons that have nothing to do with a
hardware defect, such as cosmic radiation, electrostatic discharge, or software
errors. Consider replacing an FRU only when a problem recurs. If you suspect that
an FRU is defective, clear the error logs and run the test again. If the error does
not recur, do not replace the FRU.
• Be careful not to replace a nondefective FRU.
19
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
What to do first
When you do return an FRU, you must include the following information in the
parts exchange form or parts return form that you attach to it:
1. Name and phone number of servicer
2. Date of service
3. Date on which the machine failed
4. Date of purchase
5. Procedure index and page number in which the failing FRU was detected
6. Failing FRU name and part number
7. Machine type, model number, and serial number
8. Customer’s name and address
Note for warranty: During the warranty period, the customer may be
responsible for repair costs if the computer damage was caused by misuse,
accident, modification, unsuitable physical or operating environment, or
improper maintenance by the customer.
The following is a list of some common items that are not covered under
warranty and some symptoms that might indicate that the system was
subjected to stress beyond normal use.
Before checking problems with the computer, determine whether the damage is
covered under the warranty by referring to the following list:
The following are not covered under warranty:
• LCD panel cracked from the application of excessive force or from being
dropped
• Scratched (cosmetic) parts
• Distortion, deformation, or discoloration of the cosmetic parts
• Plastic parts, latches, pins, or connectors that have been cracked or broken
by excessive force
• Damage caused by liquid spilled into the system
• Damage caused by the improper insertion of a PC Card or the installation of
an incompatible card
• Improper disk insertion or use of an optical drive
• Diskette drive damage caused by pressure on the diskette drive cover,
foreign material in the drive, or the insertion of a diskette with multiple labels
• Damaged or bent diskette eject button
• Fuses blown by attachment of a nonsupported device
• Forgotten computer password (making the computer unusable)
• Sticky keys caused by spilling a liquid onto the keyboard
• Use of an incorrect AC adapter on laptop products
The following symptoms might indicate damage caused by nonwarranted
activities:
• Missing parts might be a symptom of unauthorized service or modification.
• If the spindle of a hard disk drive becomes noisy, it may have been subjected
to excessive force, or dropped.
20
General checkout
Power system checkout
To verify a symptom, follow the steps below:
1. Turn off the computer.
2. Connect the AC adapter.
3. Make sure that power is supplied when you turn on the computer.
4. Turn off the computer.
5. Disconnect the AC adapter.
6. Make sure that the battery pack supplies power when you turn on the
computer.
If you suspect a power problem, see the appropriate power supply checkout:
• “Checking the AC adapter” on page 21
• “Checking operational charging” on page 22
Checking the AC adapter
You are here because the computer fails only when the AC adapter is used.
• If the power-on indicator does not turn on, check the power cord of the AC
adapter for correct continuity and installation.
• If the computer does not charge during operation, go to “Checking
operational charging”.
To check the AC adapter, follow the steps below:
1. Unplug the AC adapter cable from the computer.
2. Measure the output voltage at the plug of the AC adapter cable. See the
following figure:
Pin
Voltage (V DC)
1
+20
2
0
2
1
Note: Output voltage for the AC adapter pin No. 2 may differ from the one you
are servicing.
3. If the voltage is not correct, replace the AC adapter.
4. If the voltage is acceptable, do the following:
• Replace the system board.
• If the problem persists, go to “Lenovo ideapad FLEX 5-1470/Lenovo ideapad
FLEX 5-1570” on page 26.
Note: Noise from the AC adapter does not always indicate a defect.
21
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Checking operational charging
To check whether the battery charges properly during operation, use a
discharged battery pack or a battery pack that has less than 50% of the total
power remaining when installed in the computer.
Perform operational charging. If the battery status indicator or icon is not lit,
remove the battery pack and let it return to room temperature. Reinstall the
battery pack. If the charge indicator or icon is still off, replace the battery pack.
If the charge indicator is still not lit, replace the system board.
Checking the battery pack
Battery charging does not start until the Power Meter shows that less than 95%
of the total power remains; under this condition the battery pack can charge to
100% of its capacity. This protects the battery pack from being overcharged or
from having a shortened life.
To check your battery, move your cursor to the Power Meter icon in the icon
tray of the Windows® taskbar and wait for a moment (but do not click it), and
the
percentage of battery power remaining is displayed. To get detailed information
about the battery, double-click the Power Meter icon.
Note: If the battery pack becomes hot, it may not be able to be charged.
Remove it from the computer and leave it at room temperature for a while. After
it cools down, reinstall and recharge it.
22
Related service information
Related service information
This chapter presents the following information:
• “Restoring the factory contents by using OneKey Recovery” on page 23
• “Passwords” on page 24
• “Power management” on page 25
Restoring the factory contents by using OneKey Recovery
Restore of factory default
The Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570 computer
comes with pre-installed OneKey Recovery System.In order to save application
files and the initial backed up files of the system, the hard disk in a Lenovo
computer includes a hidden partition when it is shipped. If you need to restore
the system to the point of your first boot up, just enter the Recovery System.
For details of the Recovery system, see the User Guide for Recovery system.
Note: This will delete all the new data on the system partition (C drive), which
is not recoverable. Make sure to back up your critical data before you perform this
action.
23
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Passwords
As many as three passwords may be needed for any Lenovo computer: the
power-on password (POP), the hard disk password (HDP), and the supervisor
password.
If any of these passwords has been set, a prompt for it appears on the screen
whenever the computer is turned on. The computer does not start until the
password is entered.
Power-on password
A power-on password (POP) protects the system from being powered on by
an unauthorized person. The password must be entered before an operating
system can be booted.
Hard-disk password
There are two hard-disk passwords (HDPs):
+ User HDP - for the user
+ Master HDP - for the system administrator, who can use it to get access to
the hard disk drive even if the user has changed the user HDP
Attention: If the user HDP has been forgotten, check whether a master HDP
has been set. If it has, it can be used for access to the hard disk drive. If
no master HDP is available, neither Lenovo nor Lenov authorized service
technicians provide any services to reset either the user or the master HDP, or
to recover data from the hard disk drive. The hard disk drive can be replaced
for a scheduled fee.
Supervisor password
A supervisor password protects the system information stored in the BIOS. The
user must enter the supervisor password to get access to the BIOS and change
the system configuration.
Attention: If you forget the password, there is no service procedure to reset
the password. The system board must be replaced for a scheduled fee.
24
Related service information
Power management
Note: Power management modes are not supported for an APM operating
system.
Putting the computer to sleep or shutting it down
When you have finished working with your computer, you can put it to sleep or
shut it down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the computer to
sleep. When the computer is in sleep mode, you can quickly wake it to resume
use, bypassing the startup process.
To put the computer to sleep, do one of the following:
• Close the display lid.
• Press the Power button.
• Open the start menu, and then select Power
→ Sleep.
Attention: Wait until the power indicator light starts blinking (indicating that
the computer is in sleep mode) before you move your computer. Moving your
computer while the hard disk is spinning can damage the hard disk, causing
loss of data.
To wake the computer, do one of the following:
• Press any key on the keyboard. (Notebook mode only)
• Press the Power button.
Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down your computer, do one of the following:
• Open the start menu, and then select Power
→ Shut down.
• Press and hold or right-click the Start button in the lower-left corner and
select Shut down or sign out → Shut down.
25
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
This chapter presents the following product-specific service references and
product-specific parts information:
• “Specifications” on page 26
• “Status indicators” on page 27
• “Keyboard function keys” on page 28
• “FRU replacement notices” on page 29
• “Removing and replacing an FRU” on page 30
• “Locations” on page 62
• “Parts list” on page 65
Specifications
The following table lists the specifications of the Lenovo ideapad FLEX
5-1470/Lenovo ideapad FLEX 5-1570:
Table 1. Specifications
Feature
Processor
Description
View the system properties of your computer.
You can do this as follows: Open the Control Panel, and then select
System and Security → System.
Graphic Chipset
Display
Standard
memory
SSD
I/O port
Audio
Bluetooth
wireless
Keyboard
Touch pad
Integrated
camera
Battery
AC adapter
Pre-installed
operating
system
26
• 14.0-inch, 16:9, 1,366 × 768 pixels HD / 1,920 × 1,080 pixels FHD
(Lenovo ideapad FLEX 5-1470)
• 15.6-inch, 16:9, 1,920 × 1,080 pixels FHD / 3,840 × 2,160
pixels UHD (Lenovo ideapad FLEX 5-1570)
• DDR4, SODIMM × 1 (max 16 GB)
• 128 GB / 256 GB / 512 GB / Optane memory 16 GB, PCIE M.2
USB 3.0 × 2
Combo audio jack × 1
HDMI port × 1
Type-C × 1 (USB 3.0)
Memory card slot (SD/SDHC/SDXC/MMC)
• 1/8" Combo audio jack
• JBL Branded Speaker
• Built-in microphone × 2
• Built-in antenna with wireless card module for all Models
• 6 Row, Lenovo Keyboard, Back-light
• Multi-touch type
• 720P HD
•
•
•
•
2 cells / 3 cells, 35 Wh / 52.5 Wh (Lenovo ideapad FLEX 5-1470)
3 cells, 52.5 Wh (Lenovo ideapad FLEX 5-1570)
20 V DC, 45 W / 65 W (Lenovo ideapad FLEX 5-1470)
20 V DC, 65 W (Lenovo ideapad FLEX 5-1570)
• Win10
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Status indicators
The system status indicators below show the computer status:
1
2
Table 2. Status indicators
Indicator Indicator status
On (solid white)
On (solid
amber)
Battery
status
indicator
Charge
status
Charging
Discharging
Blinking slowly
(white)
Charging
Blinking slowly
(amber)
Charging
1
Power
status
indicator
2
Blinking quickly
(amber)
Off
On (solid white)
Blinking
Off
Meaning
The battery has more than 80%
charge.
The battery has between 5% and
20% charge.
The battery has between 20% and
80% charge. When the battery
reaches 80% charge, the light will
stop blinking. However, charging
will continue until the battery is fully
charged.
The battery has less than 20%
charge. When the battery charge
reaches 20%, the blinking color will
change to white.
Discharging
The battery has less than 5% charge.
Discharging
-----
The battery has more than 20% charge.
The computer is powered on.
The computer is in sleep mode.
---
The computer is powered off.
27
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Keyboard function keys
You can access certain system settings quickly by pressing the appropriate
function keys.
Table 3. Fn key combinations
Fn + B:
Fn + P:
Fn + C:
Fn + S:
Fn + :
Fn + :
Fn + :
Fn + :
Fn + Space
(on select models):
Activates the break function.
Activates the pause function.
Enables/disables the scroll lock.
Activates the system request.
Activates the Pgup key function.
Activates the Pgdn key function.
Activates the home key function.
Activates the end key function.
Adjusts the keyboard backlight (off → dim → bright → off).
Table 4. Hotkeys
:
Mutes/unmutes the sound.
:
Decreases the volume level.
:
Increases the volume level.
:
Enables/disables the microphone.
:
Refreshes the desktop or the currently active window.
:
Enables/disables the touchpad.
:
Enables/disables Airplane mode.
:
Enables/disables the integrated camera.
:
Locks the screen.
:
Toggles the display between the computer and an external
device.
:
Decreases display brightness.
:
Increases display brightness.
Note: You can use the Lenovo Setting to enable/disable the hotkey function.
28
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
FRU replacement notices
This section presents notices related to removing and replacing parts. Read
this section carefully before replacing any FRU.
Screw notices
Loose screws can cause a reliability problem. In the Lenovo computer, this
problem is addressed with special nylon-coated screws that have the following
characteristics:
• They maintain tight connections.
• They do not easily come loose, even with shock or vibration.
• They are harder to tighten.
Do the following when you service this machine:
• Keep the screw kit in your tool bag.
• Carefully remove screws for reuse when replacing FRUs.
• Use a torque screwdriver if you have one.
Tighten screws as follows:
• Plastic to plastic
Turn an additional 90° after the screw head touches the surface of the
plastic part:
more than 90°
(Cross-section)
• Logic card to plastic
Turn an additional 180° after the screw head touches the surface of the
logic card:
more than 180°
(Cross-section)
• Torque driver
If you have a torque screwdriver, refer to the “Torque” column for each step.
• Make sure that you use the correct screws. If you have a torque screwdriver,
tighten all screws firmly to the torque shown in the table. Carefully remove
screws for reuse when replacing FRUs. Make sure that all screws are
tightened firmly.
• Ensure torque screwdrivers are calibrated correctly following country
specifications.
29
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Removing and replacing an FRU
This section presents exploded figures with the instructions to indicate how to
remove and replace the FRU. Make sure to observe the following general rules:
1. Do not attempt to service any computer unless you have been trained and
certified. An untrained person runs the risk of damaging parts.
2. Before replacing any FRU, review “FRU replacement notices” on page 29.
3. Begin by removing any FRUs that have to be removed before the failing
FRU. Any of such FRUs are listed at the top of the page. Remove them in
the order in which they are listed.
4. Follow the correct sequence in the steps to remove the FRU, as given in the
figures by the numbers in square callouts.
5. When turning a screw to replace an FRU, turn it in the direction as given by
the arrow in the figure.
6. When removing the FRU, move it in the direction as given by the arrow in
the figure.
7. To put the new FRU in place, reverse the removal procedures and follow
any of the notes that pertain to replacement. For information about
connecting and arranging internal cables, see “Locations” on page 62.
8. When replacing an FRU, use the correct screw as shown in the procedures.
DANGER
Before removing any FRU, turn off the computer, unplug all power cords from
electrical outlets, remove the battery pack, and then disconnect any of the
interconnecting cables.
Attention: After replacing an FRU, do not turn on the computer until you have
made sure that all screws, springs, and other small parts are in place and none
are loose inside the computer. Verify this by shaking the computer gently and
listening for rattling sounds. Metallic parts or metal flakes can cause electrical
short circuits.
Attention: The system board is sensitive to, and can be damaged by,
electrostatic discharge. Before touching it, establish personal grounding by
touching a ground point with one hand or using an electrostatic discharge (ESD)
strap (P/N 6405959) to remove potential shock reasons.
Notes:
• This manual applies to the following models: Lenovo ideapad FLEX 5-1470/
Lenovo ideapad FLEX 5-1570.
• The illustrations used in this manual are for Lenovo ideapad FLEX 5-1470
unless otherwise stated.
30
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
1010 Base cover
Figure 1. Removal steps of base cover
Remove the screws 1.
1
1
1
1
1
1
1
1
1
1
Step
1
Screw (quantity)
Color
M2.0 x 6.0 mm, Phillips-head, nylok-coated (10)
LOW TO UPPER
Black/ 1.0-1.5 kgf*cm
Silver
Torque
Remove the base cover 2.
2
31
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Note: Applying labels to the base cover
If you see the following labels on base cover, it needs to be peeled off from
the old base cover, and put on the new base cover.
a
OS label
b
Indonesia label
c
WLAN label
d
BT label
e
China Office label
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
32
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
1020 Battery pack
For access, remove this FRU:
• “1010 Base cover” on page 31
DANGER
Only use the battery specified in the parts list for your computer. Any other battery
could ignite or explode.
Figure 2. Removal steps of battery pack
Unplug the battery pack connector in the direction shown by arrow 1. Remove
the screws 2. Release the cable from the cable guides, then remove the
battery pack in the direction shown by arrow 3.
2
1
2
Step
2
3
Screw (quantity)
Color
Torque
M1.98 x 3.0 mm, Phillips-head, nylok-coated (2)
BATT TO UPPER
Black
1.0-1.5 kgf*cm
When installing: Make sure that the battery connector is attached firmly.
33
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
1030 Solid state disk
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
Figure 3. Removal steps of solid state disk
Remove the screw 1.
1
Step
1
Screw (quantity)
Color
Torque
M1.98 x 3.0 mm, Phillips-head, nylok-coated (1)
SSD TO MB
Black
1.0-1.5 kgf*cm
Remove the solid state disk in the direction shown by arrow 2.
2
34
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
1040 Hard disk drive
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard
disk drive is sensitive to physical shock. Improper handling can cause damage
and permanent loss of data.
• Before removing the drive, suggest the customer to backup all the information
on it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
Figure 4. Removal steps of hard disk drive
Remove the screws
by arrow 2.
1, then remove the hard disk drive in the direction shown
1
1
Step
1
2
Screw (quantity)
Color
Torque
M1.98 × 3.0 mm, Phillips head, nylok-coated (2)
HDD BRK TO UPPER
Black
1.0-1.5 kgf*cm
Remove the screws 3, and then take out the metal frame.
3
3
3
3
Step
3
Screw (quantity)
Color
Torque
M3 × 3 mm, Phillips head, nylok-coated (4)
HDD BRK TO HDD
Silver
1.5-2.0 kgf*cm
35
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
1050 PCI Express Mini Card for wireless LAN
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
Important: The preinstalled WLAN module may only be replaced with a Lenovo
approved module in order to comply with FCC and IC regulations. Refer to
“Table 5. Parts list—Overall” on page 67 for Lenovo part numbers for the
approved modules.
Figure 5. Removal steps of PCI Express Mini Card for wireless LAN
Peel off the sponge on the card 1.
1
36
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Figure 5. Removal steps of PCI Express Mini Card for wireless LAN (continued)
Disconnect the two wireless LAN cables (black, white) 2, and then remove the
screw 3.
2 2
3
In step 2, unplug the jacks by using the removal tool antenna RF connector
(P/N: 08K7159), or pick up the connectors with your fingers and gently unplug
them in the direction shown by the arrows.
Notes:The wireless LAN card has 2 cables in step 2.
The wireless LAN card in some models might have 3 cables in step 2.
Step
3
Screw (quantity)
Color
Torque
M1.98 × 3.0 mm, Phillips-head, nylok-coated (1)
WLAN TO MB
Black
1.0-1.5 kgf*cm
Remove the card in the direction shown by arrow 4.
4
When installing: When installing the wireless LAN card, plug the black cable
into the jack labeled MAIN and the white cable into the jack labeled AUX.
37
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
1060 Speakers
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
Figure 6. Removal steps of speakers
Unplug the speaker connector in the direction shown by arrow 1. Release
the speaker cable from the cable guides and peel off the tape that secures
the cable.
1
When installing: Make sure that the connector is attached firmly.
Remove the two speakers 2.
2
2
38
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
1070 DIMM
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
Figure 7. Removal steps of DIMM
Carefully remove the DIMM EMI shielding 1.
1
39
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Figure 7. Removal steps of DIMM (continued)
Release the two latches on both edges of the socket at the same time in the
directions shown by arrows 2, and then unplug the DIMM in the direction shown
by arrow 3.
2
3
2
When installing: Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into place. Make sure that it is firmly fixed
in the slot and is difficult to move.
Note: When replacing the memory is completed, you need to restart the
computer after the first reboot.
40
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
1080 Fan and Heat Sink assembly
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
Figure 8. Removal steps of fan and heat sink assembly
Remove the screws 1.
1
1
1
1
Step
1
1
Screw (quantity)
Color
Torque
M1.98 x 3.0 mm, Phillips-head, nylok-coated (5)
THERMAL MODULE TO CPU BRK/THERMAL
MODULE TO GPU BRK (for DIS only)
Black
1.0-1.5 kgf*cm
41
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Figure 8. Removal steps of fan and heat sink assembly (continued)
Remove the heat sink module in the direction shown by arrow 2.
2
Attention: Do not handle the heat sink assembly roughly. Improper handling
can cause distortion or deformation and imperfect contact with components.
a
b
When installing: Before you attach the fan assembly to the computer, apply
thermal grease, at an amount of 0.2 grams, to parts a and b shown in the
figure above. Either too much or too little grease application can cause a
thermal problem due to imperfect contact with a component.
42
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Figure 8. Removal steps of fan and heat sink assembly (continued)
Unplug the fan connector in the direction shown by arrow 3. Remove the
screws 4. Release the LCD cable from the cable guides.
4
4
3
Step
4
Screw (quantity)
Color
Torque
M1.98 × 3.0 mm, Phillips head, nylok-coated (2)
FAN TO upper
Black
1.0-1.5 kgf*cm
When installing: Make sure that the connector is attached firmly.
Remove the fan 5.
5
43
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
1090 IO board
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
• “1080 Fan and Heat Sink assembly” on page 41
Figure 9. Removal steps of IO board
Peel off the adhesive tape that secures the RTC battery 1.
1
Disconnect the IO board connector in the directions shown by arrows 2 and 3.
Remove the screw 4.
4
2
3
Step
4
44
Screw (quantity)
Color
Torque
M2.0 x 3.5 mm, Phillips-head, nylok-coated (1)
IO BOARD TO UPPER
Silver
1.0-1.5 kgf*cm
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Figure 9. Removal steps of IO board (continued)
Remove the IO board 5.
5
Unplug the RTC battery connector in the direction shown by arrow 6, then
remove the RTC battery.
6
45
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
1100 System board
Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
• During the whole process, make sure not to drop or stack the system board.
• If you put a system board down, make sure to put it only on a padded surface, such
as an ESD mat or conductive corrugated material.
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
• “1030 Solid state disk” on page 34
• “1040 Hard disk drive” on page 35
• “1050 PCI Express Mini Card for wireless LAN” on page 36
• “1060 Speakers” on page 38
• “1080 Fan and Heat Sink assembly” on page 41
• “1090 IO board” on page 44
Figure 10. Removal steps of system board (continued)
Detach the connectors in the directions shown by arrows 1, 2, 3 and 4.
3
4
1
2
1
2
When installing: Make sure that the connectors are attached firmly.
46
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Figure 10. Removal steps of system board (continued)
Remove the screws 5.
5
5
Step
5
5
Screw (quantity)
Color
Torque
M1.98 x 3.0 mm, Phillips-head, nylok-coated (3)
MB TO UPPER
Black
1.0-1.5 kgf*cm
Remove the system board 6.
6
47
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
1110 Upper case
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
• “1030 Solid state disk” on page 34
• “1040 Hard disk drive” on page 35
• “1050 PCI Express Mini Card for wireless LAN” on page 36
• “1060 Speakers” on page 38
• “1080 Fan and Heat Sink assembly” on page 41
• “1090 IO board” on page 44
• “1100 System board” on page 46
Figure 11. Removal steps of upper case
Remove the screws 1.
1
1
1
1
Step
1
48
Screw (quantity)
Color
Torque
M2.5 × 4.0 mm, Phillips-head, nylok-coated (4)
HINGE BRK TO UPPER
Silver
1.5-2.0 kgf*cm
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Figure 11. Removal steps of upper case (continued)
Open the hinges 2.
2
2
Rotate the upper case in the direction shown by arrows
upper case.
3. Then remove the
3
3
49
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
1120 DC-in cable
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
• “1030 Solid state disk” on page 34
• “1040 Hard disk drive” on page 35
• “1050 PCI Express Mini Card for wireless LAN” on page 36
• “1060 Speakers” on page 38
• “1080 Fan and Heat Sink assembly” on page 41
• “1090 IO board” on page 44
• “1100 System board” on page 46
• “1110 Upper case” on page 48
Figure 12. Removal steps of DC-in cable
Remove the DC-in cable in the direction shown by arrow 1.
1
50
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
1130 LCD unit
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
• “1030 Solid state disk” on page 34
• “1050 PCI Express Mini Card for wireless LAN” on page 36
• “1060 Speakers” on page 38
• “1080 Fan and Heat Sink assembly” on page 41
• “1100 System board” on page 46
• “1110 Upper case” on page 48
Figure 13. Removal steps of LCD unit
Remove the hinge cover with tweezers 1.
1
1
1
Remove the hinge rubbers 2.
2
2
51
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Figure 13. Removal steps of LCD unit (continued)
Remove the screws 3.
3
3
3
3
Step
3
Screw (quantity)
Color
Torque
M2.0 × 2.5 mm, Phillips-head, nylok-coated (4)
LCD BEZELTO COVER
Black
1.0-1.5 kgf*cm
Gently pull out the two pieces of adhesive tape with tweezers in the direction
shown by arrows 4.
4
52
4
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Figure 13. Removal steps of LCD unit (continued)
Lift the LCD unit 5.
5
5
53
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
1140 Camera board, sensor board and EDP cable
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
• “1030 Solid state disk” on page 34
• “1040 Hard disk drive” on page 35
• “1050 PCI Express Mini Card for wireless LAN” on page 36
• “1060 Speakers” on page 38
• “1080 Fan and Heat Sink assembly” on page 41
• “1090 IO board” on page 44
• “1100 System board” on page 46
• “1110 Upper case” on page 48
• “1130 LCD unit” on page 51
Figure 14. Removal steps of camera board, sensor board and EDP cable
Peel off the tape that secures the camera board 1. Unplug the connector in
the direction shown by arrow 2.
1
2
When installing: Make sure that the connector is attached firmly.
54
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Figure 14. Removal steps of camera board, sensor board and EDP cable
(continued)
Remove the camera board 3.
3
Unplug the connector in the direction shown by arrow 4.
4
Remove the sensor board 5.
5
55
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Figure 14. Removal steps of camera board, sensor board and EDP cable
(continued)
Peel off the tape 6 and 7.
7
6
6
Detach the two connectors in the direction shown by arrows 8.
8
8
56
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Figure 14. Removal steps of camera board, sensor board and EDP cable
(continued)
Remove the EDP cable 9.
9
9
57
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
1150 LCD hinges
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
• “1030 Solid state disk” on page 34
• “1040 Hard disk drive” on page 35
• “1050 PCI Express Mini Card for wireless LAN” on page 36
• “1060 Speakers” on page 38
• “1080 Fan and Heat Sink assembly” on page 41
• “1090 IO board” on page 44
• “1100 System board” on page 46
• “1110 Upper case” on page 48
• “1130 LCD unit” on page 51
• “1140 Camera board, sensor board and EDP cable” on page 54
Figure 15. LCD hinges
Remove the screws 1.
1
1
1
1
1
1
Step
1
58
Screw (quantity)
Color
Torque
M2.5 × 2.5 mm, Phillips-head, nylok-coated (6)
HINGE TO LCD COVER
Black
1.5-2.0 kgf*cm
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Figure 15. Removal steps of LCD hinges (continued)
Then release the hinges in the direction shown by arrows 2.
2
2
59
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
1160 Fingerprint module (on select models)
For access, remove these FRUs in order:
• “1010 Base cover” on page 31
• “1020 Battery pack” on page 33
Figure 16. Removal steps of fingerprint module
Remove the screw 1, then remove the fingerprint bracket 2.
Step
1
60
Screw (quantity)
Color
Torque
M2.0 x 2.5 mm, Phillips-head, nylok-coated (1)
FINGER PINTER TO UPPER
Silver
1.0-1.5 kgf*cm
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Figure 16. Removal steps of fingerprint module (continued)
Remove the fingerprint board 3.
61
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Locations
Front and right-side view
aIntegrated camera
bBuilt-in microphone
cWireless LAN antennas
dMulti-touch screen
eTouchpad
fKensington mini security slot
gUSB 3.0 port
hMemory card slot
9Novo button
jPower button
Note: For the description of each indicator, see “Status indicators” on page 27.
3
2
1
2
3
4
6
7
8
5
9
10
62
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Bottom and left-side view
aSpeakers
bAC power adapter jack
cBattery status indicator
Note: For the description of each indicator, see “Status indicators” on page 27.
4HDMI port
eUSB 3.0 port
fType-C port
gCombo audio jack
1
2
3
1
7
6
5
4
63
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Rear view
aVentilation slots
1
64
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Parts list
This section presents the following service parts:
• “Overall” on page 66
• “LCD FRUs” on page 71
• “AC adapters” on page 73
• “Screws” on page 73
Notes:
• Each FRU is available for all types or models, unless specific types or models
are specified.
Attention:
Do not attempt to replace an FRU on your own. If an FRU is damaged, contact
a Lenovo authorized servicer or a marketing representative for replacement
or repair. Only qualified technicians can inspect or repair this product.
65
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Overall
1
e
2
4
3
5
7
6
9
12
a
10
8
b
11
c
14
13
d
66
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Table 5. Parts list—Overall
No.
FRU
FRU no.
a-e
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
see “Miscellaneous parts” on page 72.
LCD unit (see “LCD FRUs” on page 71.)
Upper Case C 80XALNVOBFPNBLW/KBUS
Upper Case C 80XA LNVOBFPBLW/KBUS
Upper Case C 80XALNVOBFPNBLW/KBSP
Upper Case C 80XA LNVOBFPBLW/KBSP
Upper CaseC80XALNVOBFPNBLW/KBCF-E
Upper Case C80XALNVOBFPBLW/KBCF-E
Upper Case C80XALNVOBNFPNBLW/KBUS
Upper Case C 80XALNVOBNFPBLW/KBUS
Upper Case C80XALNVOBNFPNBLW/KBSP
Upper Case C 80XALNVOBNFPBLW/KBSP
UpperCaseC80XALNVOBNFPNBLW/KBCF-E
Upper CaseC80XALNVOBNFPBLW/KBCF-E
Upper Case C 80XA LNVOBFPBLW/KBUSA
Upper Case C 80XALNVOBNFPBLW/KBUSA
Upper Case C80XB FP W/KB NBL US
Upper Case C80XB FP W/KB BL US
Upper Case C80XB FPW/KB NBL CF-EN
Upper Case C80XB FP W/KB BL CF-EN
Upper Case C80XB FP W/KB NBL SPN
Upper Case C80XB FP W/KB BL SPN
Upper Case C80XB FP W/KB BL USA
Upper Case C80XB NFP W/KB NBL US
Upper Case C80XB NFP W/KB BL US
Upper Case C80XB NFPW/KB NBLCF-EN
Upper Case C80XB NFP W/KB BLCF-EN
Upper Case C80XB NFP W/KB NBL SPN
Upper Case C80XB NFP W/KB BL SPN
Upper Case C80XB NFP W/KB BL USA
MB C 80X8 NOK 4415U UMA NFPNBL
MB C 80X8 WIN 4415U UMA NFPNBL
MB C 80X8 NOK 4415U UMA FP NBL
MB C 80X8 WIN 4415U UMA FP NBL
MB C 80X8 NOK 4415U UMA NFP BL
MB C 80X8 WIN 4415U UMA NFP BL
MB C 80X8 NOK 4415U UMA FP BL
MB C 80X8 WIN 4415U UMA FP BL
MBC80X8NOK4415UN16SGTR2GNFPNBL
MBC80X8WIN4415UN16SGTR2GNFPNBL
MB C80X8NOK4415UN16SGTR2GFPNBL
MB C80X8WIN4415UN16SGTR2GFPNBL
MB C80X8NOK4415UN16SGTR2GNFPBL
MB C80X8WIN4415UN16SGTR2GNFPBL
MB C 80X8NOK4415UN16SGTR2GFPBL
MB C 80X8WIN4415UN16SGTR2GFPBL
5CB0N67794
5CB0N67790
5CB0N67799
5CB0N67792
5CB0N67801
5CB0N67798
5CB0N67797
5CB0N67796
5CB0N67789
5CB0N67795
5CB0N67800
5CB0N67793
5CB0N89971
5CB0N89970
5CB0N71295
5CB0N71336
5CB0N71308
5CB0N71305
5CB0N71297
5CB0N71312
5CB0N71262
5CB0N71317
5CB0N71281
5CB0N71324
5CB0N71284
5CB0N71296
5CB0N71342
5CB0N71315
5B20N67507
5B20N67710
5B20N67733
5B20N67753
5B20N67548
5B20N67453
5B20N67610
5B20N67489
5B20N67561
5B20N67697
5B20N67582
5B20N67413
5B20N67731
5B20N67668
5B20N67627
5B20N67369
CRU
ID.
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Lenovo Lenovo
ideapad ideapad
FLEX 5- FLEX 51470
1570
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
67
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Table 5. Parts list—Overall (continued)
No.
FRU
FRU no.
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
MB C 80X8 NOKI37100UHUMANFPNBL
MB C 80X8 WINI37100UHUMANFPNBL
MB C 80X8 NOK I37100UHUMAFPNBL
MB C 80X8 WIN I37100UHUMAFPNBL
MB C 80X8 NOK I37100UHUMANFPBL
MB C 80X8 WIN I37100UHUMANFPBL
MB C 80X8 NOK I37100UH UMAFPBL
MB C 80X8 WIN I37100UH UMAFPBL
MBC80X8NOKI37100UHN16SGTRNFPNBL
MBC80X8WINI37100UHN16SGTRNFPNBL
MBC80X8NOKI37100UHN16SGTRFPNBL
MBC80X8WINI37100UHN16SGTRFPNBL
MBC80X8NOKI37100UHN16SGTRNFPBL
MBC80X8WINI37100UHN16SGTRNFPBL
MBC80X8NOKI37100UHN16SGTR2GFPBL
MBC80X8WINI37100UHN16SGTR2GFPBL
MB C 80X8 NOKI57200UHUMANFPNBL
MB C 80X8 WINI57200UHUMANFPNBL
MB C 80X8 NOK I57200UHUMAFPNBL
MB C 80X8 WIN I57200UHUMAFPNBL
MB C 80X8 NOK I57200UHUMANFPBL
MB C 80X8 WIN I57200UHUMANFPBL
MB C 80X8 NOK I57200UH UMAFPBL
MB C 80X8 WIN I57200UH UMAFPBL
MBC80X8NOKI57200UHN16SGTRNFPNBL
MBC80X8WINI57200UHN16SGTRNFPNBL
MBC80X8NOKI57200UHN16SGTRFPNBL
MBC80X8WINI57200UHN16SGTRFPNBL
MBC80X8NOKI57200UHN16SGTRNFPBL
MBC80X8WINI57200UHN16SGTRNFPBL
MBC80X8NOKI57200UHN16SGTR2GFPBL
MBC80X8WINI57200UHN16SGTR2GFPBL
MB C 80X8 NOKI77500UHUMANFPNBL
MB C 80X8 WINI77500UHUMANFPNBL
MB C 80X8 NOK I77500UHUMAFPNBL
MB C 80X8 WIN I77500UHUMAFPNBL
MB C 80X8 NOK I77500UHUMANFPBL
MB C 80X8 WIN I77500UHUMANFPBL
MB C 80X8 NOK I77500UH UMAFPBL
MB C 80X8 WIN I77500UH UMAFPBL
MBC80X8NOKI77500UHN16SGTRNFPNBL
MBC80X8WINI77500UHN16SGTRNFPNBL
MBC80X8NOKI77500UHN16SGTRFPNBL
MBC80X8WINI77500UHN16SGTRFPNBL
MBC80X8NOKI77500UHN16SGTRNFPBL
MBC80X8WINI77500UHN16SGTRNFPBL
5B20N67702
5B20N67680
5B20N67353
5B20N67428
5B20N67782
5B20N67758
5B20N67491
5B20N67384
5B20N67338
5B20N67656
5B20N67705
5B20N67771
5B20N67385
5B20N67399
5B20N67390
5B20N67776
5B20N67484
5B20N67560
5B20N67769
5B20N67747
5B20N67678
5B20N67638
5B20N67317
5B20N67526
5B20N67471
5B20N67358
5B20N67590
5B20N67368
5B20N67573
5B20N67566
5B20N67434
5B20N67503
5B20N67578
5B20N67462
5B20N67565
5B20N67410
5B20N67666
5B20N67325
5B20N67518
5B20N67700
5B20N67667
5B20N67766
5B20N67739
5B20N67361
5B20N67429
5B20N67321
68
CRU
ID.
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Lenovo Lenovo
ideapad ideapad
FLEX 5- FLEX 51470
1570
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Table 5. Parts list—Overall (continued)
No.
FRU
FRU no.
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
MBC80X8NOKI77500UHN16SGTR2GFPBL
MBC80X8WINI77500UHN16SGTR2GFPBL
MB C 80XB NOK UMA I3 NFP NBL
MB C 80XB WIN UMA I3 NFP NBL
MB C 80XB NOK UMA I3 FP NBL
MB C 80XB WIN UMA I3 FP NBL
MB C 80XB NOK UMA I3 NFP BL
MB C 80XB WIN UMA I3 NFP BL
MB C 80XB NOK UMA I3 FP BL
MB C 80XB WIN UMA I3 FP BL
MB C 80XB NOK DIS I3 NFP NBL
MB C 80XB WIN DIS I3 NFP NBL
MB C 80XB NOK DIS I3 FP NBL
MB C 80XB WIN DIS I3 FP NBL
MB C 80XB NOK DIS I3 NFP BL
MB C 80XB WIN DIS I3 NFP BL
MB C 80XB NOK DIS I3 FP BL
MB C 80XB WIN DIS I3 FP BL
MB C 80XB NOK UMA I5 NFP NBL
MB C 80XB WIN UMA I5 NFP NBL
MB C 80XB NOK UMA I5 FP NBL
MB C 80XB WIN UMA I5 FP NBL
MB C 80XB NOK UMA I5 NFP BL
MB C 80XB WIN UMA I5 NFP BL
MB C 80XB NOK UMA I5 FP BL
MB C 80XB WIN UMA I5 FP BL
MB C 80XB NOK DIS I5 NFP NBL
MB C 80XB WIN DIS I5 NFP NBL
MB C 80XB NOK DIS I5 FP NBL
MB C 80XB WIN DIS I5 FP NBL
MB C 80XB NOK DIS I5 NFP BL
MB C 80XB WIN DIS I5 NFP BL
MB C 80XB NOK DIS I5 FP BL
MB C 80XB WIN DIS I5 FP BL
MB C 80XB NOK UMA I7 NFP NBL
MB C 80XB WIN UMA I7 NFP NBL
MB C 80XB NOK UMA I7 FP NBL
MB C 80XB WIN UMA I7 FP NBL
MB C 80XB NOK UMA I7 NFP BL
MB C 80XB WIN UMA I7 NFP BL
MB C 80XB NOK UMA I7 FP BL
MB C 80XB WIN UMA I7 FP BL
MB C 80XB NOK DIS I7 NFP NBL
MB C 80XB WIN DIS I7 NFP NBL
MB C 80XB NOK DIS I7 FP NBL
MB C 80XB WIN DIS I7 FP NBL
5B20N67712
5B20N67622
5B20N71272
5B20N71309
5B20N71339
5B20N71274
5B20N71291
5B20N71328
5B20N71319
5B20N71314
5B20N71287
5B20N71269
5B20N71288
5B20N71341
5B20N71301
5B20N71322
5B20N71310
5B20N71306
5B20N71270
5B20N71311
5B20N71279
5B20N71264
5B20N71344
5B20N71302
5B20N71325
5B20N71286
5B20N71277
5B20N71327
5B20N71266
5B20N71313
5B20N71303
5B20N71276
5B20N71267
5B20N71285
5B20N71334
5B20N71320
5B20N71326
5B20N71282
5B20N71292
5B20N71333
5B20N71332
5B20N71338
5B20N71343
5B20N71263
5B20N71265
5B20N71278
CRU
ID.
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Lenovo Lenovo
ideapad ideapad
FLEX 5- FLEX 51470
1570
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
69
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Table 5. Parts list—Overall (continued)
No.
FRU
FRU no.
3
3
3
3
4
5
5
6
6
7
7
8
8
8
8
9
10
11
12
13
14
14
—
MB C 80XB NOK DIS I7 NFP BL
MB C 80XB WIN DIS I7 NFP BL
MB C 80XB NOK DIS I7 FP BL
MB C 80XB WIN DIS I7 FP BL
5B20N71345
5B20N71337
5B20N71280
5B20N71261
RTC Battery C 80X8
RTC Battery C 80XB
IO Board C 80X8 W/cable
IO Board C 80XB W/cable
Fan C 80X8
Fan C 80XB
Heatsink C 80X8 UMA
Heatsink C 80X8 DIS
Heatsink C 80XB UMA
Heatsink C 80XB DIS
5B10N67538
5B10N71283
5C50N67487
5C50N71273
5F10N67388
5F10N71321
5H40N67528
5H40N67616
5H40N71260
5H40N71335
Lower Case C 80X8 Onyx Black
Lower Case C 80XB Black
AC adapter (see “AC adapters” on page 73).
5CB0N67363
5CB0N71268
70
CRU
ID.
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Lenovo Lenovo
ideapad ideapad
FLEX 5- FLEX 51470
1570
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
LCD FRUs
In Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570, there are
following types of LCDs.
• “14.0-in. HD/FHD LED”
• “15.6-in. FHD/UHD LED”
1
2
3
5
4
6
7
8
9
71
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Table 6. Parts list—LCD FRUs
No.
FRU
FRU no.
1
1
1
1
1
1
2
2
3
3
4
4
5
5
5
6
6
7
7
8
8
9
9
Hinge Cover C 80X8 M
Hinge Cover C 80X8 L
Hinge Cover C 80X8 R
Hinge Cover C 80XB M
Hinge Cover C 80XB L
Hinge Cover C 80XB R
LCD Module C 80XA HD
LCD Module C 80XA FHD
Sensor Board C 80X8
Sensor Board C 80XB
Camera C 80X8 720P
Camera C 80XB 720P
EDP Cable C 80X8
EDP Cable C 80XB FHD
EDP Cable C 80XB UHD
Rubber Hinge C 80X8
Rubber Hinge C 80XB
Hinge C 80X8 R+L Onyx Black
Hinge C 80XB R+L
Removable Tape C 80X8
Removable Tape C 80XB
LCD Cover C 80XA BLK W/LNV LOGO
LCD Cover C 80XB Black W/LOGO
5CB0N67749
5CB0N67470
5CB0N67722
5CB0N71330
5CB0N71329
5CB0N71259
5D10N45603
5D10N45602
5C50N67555
5C50N71340
5C20N67564
5C20N71300
5C10N67449
5C10N71316
5C10N71323
5R60N67768
5R60N71298
5H50N67542
5H50N71290
5T10N67431
5T10N71307
5CB0N67791
5CB0N71299
CRU
ID.
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Lenovo Lenovo
ideapad ideapad
FLEX 5- FLEX 51470
1570
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Miscellaneous parts
Table 7. Parts list—Miscellaneous parts
FRU
System miscellaneous parts:
• (a) WLAN Sponge C 80X8
• (a) WLAN Sponge C 80XB
• (b) Dimm Emi Shielding C 80X8
• (b) Dimm Emi Shielding C 80XB
• (c) HDD Bracket C 80X8
• (c) HDD Bracket C 80XB
• (d) Foot Rubber C 80X8 Onyx Black
• (d) Foot Rubber C 80XB
Cable miscellaneous parts:
• (e) DC-IN Cable C 80X8
• (e) DC-IN Cable C 80XB
P/N
CRU
ID.
Lenovo Lenovo
ideapad ideapad
FLEX 5- FLEX 51470
1570
5T10N67374
5T10N71318
5S60N67563
5S60N71275
5B40N67466
5B40N71271
5F40N67330
5F40N71289
N
N
N
N
N
N
N
N
●
5C10N67714
5C10N71331
N
N
●
●
●
●
●
●
●
●
Note: Italicized letters in parentheses are references to the exploded view in “Overall” on page 66.
72
●
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
AC adapters
Table 8. Parts list—AC adapters
FRU
P/N
CRU
ID.
*
Lenovo Lenovo
ideapad ideapad
FLEX 5- FLEX 51470
1570
Screws
Table 9. Parts list—Screws
FRU
P/N
Screw Pack C 80X8
Screw Pack C 80XB
5S10N67498
5S10N71293
CRU
ID.
N
N
Lenovo Lenovo
ideapad ideapad
FLEX 5- FLEX 51470
1570
●
●
73
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Power cords
A Lenovo power cord for a specific country or region is usually available only in
that country or region:
Table 10. Parts list—3-pin power cords
Region
•
74
P/N
CRU
ID.
*
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Table 10. Parts list—3-pin power cords (continued)
Region
P/N
CRU
ID.
75
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Table 10. Parts list—3-pin power cords (continued)
Region
76
P/N
CRU
ID.
Notices
Notices
Lenovo may not offer the products, services, or features discussed in this
document in all countries. Consult your local Lenovo representative for
information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or
imply that only that Lenovo product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe
any Lenovo intellectual property right may be used instead. However, it is the
user’s responsibility to evaluate and verify the operation of any other product,
program, or service.
Lenovo may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents.
L E N O V O G R O U P LT D . P R O V I D E S T H I S P U B L I C AT I O N “ A S I S ”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not allow disclaimer of express or implied
warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes
will be incorporated in new editions of the publication. Lenovo may make
improvements and/or changes in the product(s) and/or the program(s)
described in this publication at any time without notice.
The products described in this document are not intended for use in
implantation or other life support applications where malfunction may result in
injury or death to persons. The information contained in this document does not
affect or change Lenovo product specifications or warranties. Nothing in this
document shall operate as an express or implied license or indemnity under the
intellectual property rights of Lenovo or third parties. All information contained
in this document was obtained in specific environments and is presented as an
illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those
Web sites. The materials at those Web sites are not part of the materials for
this Lenovo product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments
may vary significantly. Some measurements may have been made on
development-level systems and there is no guarantee that these measurements
will be the same on generally available systems. Furthermore, some
measurements may have been estimated through extrapolation. Actual results
may vary. Users of this document should verify the applicable data for their
specific environment.
77
Lenovo ideapad FLEX 5-1470/Lenovo ideapad FLEX 5-1570
Hardware Maintenance Manual
Trademarks
The following terms are either registered trademarks or trademarks of Lenovo
in the United States and/or other countries:
Lenovo®
Lenovo logo®
OneKey
The following term is trademark of Microsoft Corporation in the United States,
other countries, or both:
Windows®
The following term is trademark of Intel Corporation or its subsidiaries in the
United States, other countries, or both:
Intel®
Other company, product, or service names may be the trademarks or service
marks of others.
78
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement