Sony | Trinitron KV-HW21 | User's Manual | Sony Trinitron KV-HW21 User's Manual

4-098-348-11(1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and
retain it for future reference.
KV-HW21
M83
M80
© 2003 Sony Corporation
01GB01COV-MIX.p65
1
24/7/03, 3:13 PM
Sony KV-HW21M83 Group A19 (GB) _4-098-348-11(1)
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 110 – 240 V AC.
• Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries from the
remote if you are not going to use it for several days. If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.
For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.
For children’s safety, do not leave children alone
with the TV. Do not allow children to climb onto it.
Do not place any objects on the TV. The apparatus
shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such as a
bookcase or built-in cabinet.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals to
clean the TV. Do not attach anything (e.g., adhesive
tape, cellophane tape, glue) on the painted cabinet of
the TV. Do not scratch the picture tube.
Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are present
inside the TV. Refer servicing and disposal of the
TV to qualified personnel.
Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may be
subject to excessive dust, heat, moisture or
vibrations.
2
01GB02WAR-MIX.p65
2
24/7/03, 3:14 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
To prevent fire or shock hazard, do not expose the
TV to rain or moisture.
Install the TV on a stable TV stand and floor which
can support the TV set weight. Ensure that the TV
stand surface is flat and its area is larger than the
bottom area of the TV.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Pull the power cord out by the plug. Do not pull
the power cord itself. Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.
3
01GB02WAR-MIX.p65
3
24/7/03, 3:14 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
x Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
20 mm
3.8 mm
screws
clamps
band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
or
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
4
01GB02WAR-MIX.p65
4
24/7/03, 3:14 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
Table of Contents
Installation
Additional Information
Getting Started ..................................... 6
Setting up your TV
(“Initial Setup”) .................................... 7
Connecting the 3D WOOFER
(KV-HW21M83 only) ......................... 22
Connecting optional components ... 22
Troubleshooting ................................. 24
Specifications ...................... Back cover
Overview of Controls
TV top control, front and
rear panels ............................................. 8
Using the remote control and
basic functions ...................................... 9
GB
Advanced Operations
Selecting the picture and sound
modes .................................................. 11
Menu Adjustment
Introducing the menu system .......... 12
Changing the “Picture” setting ........ 15
Changing the “Sound” setting ......... 16
Changing the “Timer” setting .......... 18
Changing the “Channel Setup”
setting .................................................. 19
Changing the “Setup” setting .......... 21
5
01GB03TOC-MIX.p65
5
24/7/03, 3:15 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
Installation
x Getting Started
1Step 1
Insert the batteries (supplied) into the remote.
b
Note
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tip
• You can also connect your TV to other optional components
(see page 22).
Step 3
b
Plug in the power cord, then press ! on the TV to
turn it on.
Note
• The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
Step 4
Set up the TV by following the instructions of the
“Initial Setup” menu (see page 7).
6
Installation
01GB04INS-MIX.p65
6
24/7/03, 3:16 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
x Setting up your TV
(“Initial Setup”)
When you turn on your TV for the first time, the “Initial Setup” menu will appear.
You may change the menu language and preset the TV channels automatically using
the buttons on the top control panel.
Tip
1
Press 2 +/– to select the desired menu
language, then press t.
Installation
and V/v/B/b buttons on the remote control can also be used for the
• The MENU,
operations below.
The selected menu language appears.
2
Press 2 +/– to select “Yes”, then press t
to preset the channels automatically or
select “No” to skip automatic channel
presetting.
Once you select “Yes”, your TV will start
searching for all the available channels.
If the message “No channel found. Please
connect cable/antenna.” appears, check your
TV connections, then press t.
3
Press 2 +/– to select “No”, then press
t. This menu will not appear again the
next time you turn on the TV by pressing
!.
To allow this menu to appear again, select
“Yes”, then press t.
Tips
• You can immediately go to the end of the ”Initial Setup” menu by pressing MENU.
• You can also set up your TV by pressing the MENU button on the top control panel for about
five seconds or using the menu system (see page 12).
Installation
01GB04INS-MIX.p65
7
24/7/03, 3:16 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
7
Overview of Controls
x TV top control, front and rear panels
TV top control panel
SOUND MODE
MENU
0
9
PROG
8
7
6
TV rear
panel
qg
1
2
Y
CB
TV front panel
(MONO)
L
L
2
R
L (MONO)
R
qa
R
5
4
32 1
qf
qd
qs
Button/Terminal
1 !
Function
Turn off or turn on the TV.
2
Remote control sensor.
–
Wake Up indicator.
18
3
3
4
5
6
7
8
Page
6
1
Standby indicator.
6
i
Headphone jack.
–
t2
Video input terminal 2.
22
PROG +/–
Select program number.
–
2 +/–
Adjust volume.
–
t
Select TV or video input.
22
Select and adjust items.
–
Confirm selected items.
–
Menu operations
7 2 +/–
8 t
9 MENU
8
(MONO)
CR
Display or cancel the menu.
–
0 SOUND MODE
Select sound mode options with a
5-Band Graphic Equalizer display.
11
qa
qs
qd
qf
qg
8
Antenna input terminal.
22
T
Monitor output terminal.
23
Component video input terminal.
23
t1
Video input terminal 1.
22
WOOFER
(KV-HW21M83 only)
Enjoy high quality sound.
22
Overview of Controls
01GB04INS-MIX.p65
8
24/7/03, 3:16 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
x Using the remote control and basic
functions
9
0
qa
qs
1
Overview of Controls
A/B
2
qd
1
2
3
4
5
6
7
8
9
0
3
PROG
qf
4
5
qg
MENU
qh
6
qj
7
qk
ql
8
TV
Button
1 ?/1
Description
Turn off temporarily or turn on the TV.
Page
–
2 a
3
4 PROG +/–
5 2 +/–
8
Display the TV program.
9
0
qs t
qd 0 – 9, ÷
qh
Mute the sound.
–
Display on-screen information.
Select TV or video input.
–
22
–
Jump to previous program number.
–
Select program number.
–
Adjust volume.
–
Change the picture size:
“On” (16:9 wide-mode), “Off”.
–
Input numbers.
–
Select surround mode options:
“On” (surround), “Simulated” (stereo-like
monaural sound), “Off”.
–
continue
Overview of Controls
01GB04INS-MIX.p65
9
24/7/03, 3:16 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
9
continued
Button
qk
Description
Select sound mode options with a 5-Band Graphic
Equalizer display.
Page
11
ql
Select picture mode options.
11
6 MENU
7
Display or cancel the menu.
14
Confirm selected items.
14
qj V, v, B, b
Select and adjust items.
14
Menu operations
Timer operations
qf
qg
Set TV to turn on automatically.
–
Set TV to turn off automatically.
–
Stereo/bilingual operations
qa A/B
Not function for your TV.
10
–
Overview of Controls
01GB04INS-MIX.p65
10
24/7/03, 3:16 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
Advanced Operations
x Selecting the picture and sound
modes
You can select picture and sound modes and adjust the setting to your
preference in the “Personal” option.
Selecting the picture mode
Press
A/B
1
2
3
4
5
6
7
8
9
0
to select the desired picture mode.
Select
To view
“Dynamic”
high contrast pictures.
“Standard”
normal pictures.
“Soft”
mild pictures.
“Personal”
the last adjusted picture setting
from the “Picture Adjustment”
option in the menu (see page 15).
PROG
MENU
TV
Selecting the sound mode
Press (or SOUND MODE on the top control panel) to select the desired sound
mode with a 5-Band Graphic Equalizer display.
Select
“Dynamic”
To listen to
Dynamic
dynamic and clear sound that emphasizes both the low
and high tones.
100 300 1k 3k 8k
“Drama”
sound that emphasizes voice and high tones.
Drama
100 300 1k 3k 8k
“Soft”
soft, natural and relaxing sounds.
Soft
100 300 1k 3k 8k
“Personal”
Personal
the last adjusted sound setting from the
“Sound Adjustment” option in the menu (see page 17).
100 300 1k 3k 8k
Advanced Operations
01GB05AVD-MIX.p65
11
24/7/03, 3:17 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
11
Menu Adjustment
x Introducing the menu system
The MENU button lets you open a menu and change the settings of your TV.
The following is an overview of the menu system.
Return icon
Name of the current
menu
Picture icon
Sound icon
Setup
Language:
English
Wide Mode:
Video Label
Color System:
Portable Audio Mode:
Timer icon
Channel Setup icon
Setup icon
Menu level 1
Select
Confirm
Menu level 3
Menu level 2
End
User Guidance
Level 1
Level 2
Level 3/Function
“Picture”
“Mode”
Select the picture mode:
“Dynamic” t “Standard” t “Soft” t “Personal”
Page
15
“Picture Adjustment” Adjust the “Personal” option:
“Picture” t “Brightness” t “Color” t
“Hue” t “Sharpness” t “Reset”
“Color Temperature” Adjust white color tint:
“Cool” t “Neutral” t “Warm”
“Intelligent Picture” Optimize picture quality:
“On” t “Off”
“Sound”
Select the sound mode:
“Dynamic” t “Drama” t “Soft” t “Personal”
“Mode”
16
“Sound Adjustment” Adjust sound frequency settings of “Personal”
option:
“Adjust” t “Reset”
Select to emphasize the left and right speakers.
“Balance”
“Intelligent Volume” Adjust volume automatically:
“On” t “Off”
“Surround”
12
Select the surround mode:
“On” t “Simulated” t “Off”
Menu Adjustment
01GB05AVD-MIX.p65
12
24/7/03, 3:17 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
Level 1
Level 2
Level 3/Function
Page
“Timer”
“Sleep Timer”
Set TV to turn off automatically.
“Wake Up Timer”
Set TV to turn on automatically.
18
Preset channels automatically.
“Channel Setup” “Auto Program”
“Manual Program”
Preset channels manually.
“TV System”
Select the TV system:
19
“B/G” t “ I” t “D/K” t “M”
“Setup”
“Program Label”
Label the program number.
“Program Block”
Block unwanted programs.
“Language”
Change the menu language:
”(Arabic)
“English” t “
“Wide Mode”
Change the picture size:
“On” (16:9 wide-mode) t “Off”
“Video Label”
Label the connected equipment.
“Color System”
Select the color system:
“Auto” t “PAL” t “SECAM” t“NTSC3.58” t
“NTSC4.43”
“Portable Audio
Mode”
Select the input connected to your audio
equipment:
“Video1” t “Video2” t “Off”
21
Menu Adjustment
01GB05AVD-MIX.p65
13
24/7/03, 3:17 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
13
How to use the menu
0
PROG
Picture
Mode:
Dynamic
Picture Adjustment
Color Temperature: Cool
Intelligent Picture:
On
Press MENU to
display the menu.
MENU
Select
Press V or v to select
the desired item.
Channel Setup
Auto Program
Manual Program
TV System:
Program Label
TV
End
Confirm
B/G
Program Block
Select
Press
(or b) to
confirm your
selection and
go to the next
level.
End
Confirm
Channel Setup
Auto Program
Manual Program
TV System:
Program Label
Program Block
Select
Confirm
B/G
End
Other menu operations
To
Press
Adjust the setting value
V, v, B or b.
Move to the next/previous menu level
B or b.
Cancel the menu
MENU.
Tips
• If you want to exit from Menu level 2 to Menu level 1, press V or v until the return icon ( ) is
highlighted, then press
.
• The MENU, t and 2 +/– buttons on the top control panel can also be used for the
operations above (see page 8).
14
Menu Adjustment
01GB05AVD-MIX.p65
14
24/7/03, 3:17 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
x Changing the “Picture” setting
The “Picture” menu allows you to adjust the picture settings.
1
2
Press MENU.
Make sure the “Picture” icon (
selected, then press .
) is
Picture
Mode:
Dynamic
Picture Adjustment
Color Temperature: Cool
Intelligent Picture:
On
Select
3
End
Confirm
Press V or v to select the desired item (e.g., “Mode”), then press
.
Select
To
“Mode”
choose either “Dynamic”, “Standard”, “Soft” or
“Personal”* (see page 11).
“Color Temperature”
adjust white color tint.
Choose either “Cool” (blue tint), “Neutral” (neutral
tint) or “Warm” (red tint).
“Intelligent Picture”
optimize picture quality.
Press V or v to select “On”, then press
To cancel, select “Off”, then press
.
.
* You can adjust the setting to your personal preference in the “Picture Adjustment” and
“Color Temperature” options only when the “Personal” mode is selected.
Adjusting the “Picture Adjustment” items under
“Personal” mode
1
Press V or v to select either “Picture” (contrast), “Brightness”, “Color”,
“Hue” (color tones) or “Sharpness”, then press .
Selecting “Reset” will set your TV to the factory setting.
2
3
Press V,v,B or b to adjust the setting of your selected item, then press
.
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “Personal”.
Notes
• “Hue” can be adjusted for the NTSC color system only.
• Reducing “Sharpness” can also reduce picture noise.
Menu Adjustment
01GB05AVD-MIX.p65
15
24/7/03, 3:17 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
15
x Changing the “Sound” setting
The “Sound” menu allows you to adjust the sound settings.
1
2
Press MENU.
Press V or v to select the “Sound”
icon ( ), then press .
Sound
Mode:
Dynamic
Sound Adjustment
Balance
Intelligent Volume: Off
Surround:
Off
Select
3
End
Confirm
Press V or v to select the desired item (e.g., “Mode”), then press
.
Select
To
“Mode”
choose either “Dynamic”, “Drama”, “Soft” or
“Personal”* (see page 11).
“Balance”
Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
“Intelligent Volume”
adjust the volume of all program numbers and
video inputs automatically.
.
Press V or v to select “On”, then press
To cancel, select “Off”, then press
.
“Surround”
choose either “On”, “Simulated” or “Off”
(see page 9).
* You can adjust the setting to your personal preference in the “Sound Adjustment”
option only when the “Personal” mode is selected (see page 17).
16
Menu Adjustment
01GB06ADJ-MIX.p65
16
24/7/03, 3:17 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
Adjusting the “Sound Adjustment” item under
“Personal” mode
The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings
of “Personal” mode in the menu.
1
Make sure that “Adjust” is selected,
then press
.
Adjustment: Personal
Adjust
Reset
Selecting “Reset” will set your TV to
the factory setting.
100 300
Select
2
Confirm
1k
3k
8k
End
Press B or b to select the desired sound frequency, then press V or v to
adjust the setting and press .
The adjusted settings will be received when you select “Personal”.
Notes
• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
will affect lower pitched sound.
• You may display the settings directly using the SOUND MODE button on the top control
panel (see page 8) or button on the remote control (see page 10).
Menu Adjustment
01GB06ADJ-MIX.p65
17
24/7/03, 3:17 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
17
x Changing the “Timer” setting
The “Timer” menu allows you to set TV to turn off and turn on automatically.
1
2
Press MENU.
Press V or v to select the “Timer” icon ( ),
then press
.
Timer
Sleep Timer:
Off
Wake Up Timer: Off
Select
3
Confirm
Press V or v to select the desired item (e.g., “Sleep Timer”), then press
End
.
Select
To
“Sleep Timer”
set TV to turn off automatically.
Press V or v to select the desired period of time (max. of 1 hour
and 30 minutes), then press
.
“Wake Up Timer”
set TV to turn on automatically.
Press V or v to select the desired period of time (max. of 12
hours), then press
. After the selected length of time, the TV
switches on automatically and “Wake Up Timer” will appear on
the screen.
The
indicator on the TV lights up amber once you set the
“Wake Up Timer”.
Notes
• You can also cancel “Sleep Timer” and “Wake Up Timer” by turning off the TV’s main power.
• If no buttons or controls are pressed for more than one hour after the TV is turned on using
the “Wake Up Timer”, the TV automatically goes into standby mode.
18
Menu Adjustment
01GB06ADJ-MIX.p65
18
24/7/03, 3:17 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
x Changing the “Channel Setup”
setting
The “Channel Setup” menu allows you to preset channels automatically,
manually preset channels, select the TV system, label the program number and
block unwanted programs.
1
2
Press MENU.
Press V or v to select the “Channel Setup”
.
icon ( ), then press
Channel Setup
Auto Program
Manual Program
TV System:
Program Label
Program Block
Select
3
B/G
End
Confirm
Press V or v to select the desired item (e.g., “Auto Program”), then press
.
Select
To
“Auto Program”
preset channels automatically.
“Manual Program”
manually preset desired channels and channels that cannot be
preset automatically (see Presetting channels manually on
page 20).
“TV System”
select the TV system.
Press V or v to select either “B/G”, “I”, “D/K” or “M”, then
press
.
“Program Label”
label the program number.
.
(1) Select “Program” and press
Press V or v to select the program number, then press
(2) Select “Label” and press
, then press V or v to select
alphanumeric characters for the label.
“Program Block”
.
block unwanted programs.
(1) Select “Program” and press
.
Press V or v to select the program number, then press
.
(2) Select “Block” and press
, then press V or v to choose
either “On” or “Off”.
If you preset a locked program number, that program number
will be unlocked automatically.
Note
• During automatic channel presetting, your TV screen will indicate “B/G”, “I”, “D/K” or “M” for
the “TV System”.
continue
Menu Adjustment
01GB06ADJ-MIX.p65
19
24/7/03, 3:17 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
19
continued
Presetting channels manually
1
After selecting “Manual Program”, select the program
number to which you want to preset a channel.
(1) Make sure “Program” is selected, then press
(2) Press V or v until the program number you want
to preset appears on the menu, then press .
2
Manual Program
01
Program:
B/G
TV System:
VHF Low
Fine:
Auto
Skip:
Off
.
Select
Confirm
End
Select the desired channel.
(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press
.
(2) Press V or v until the desired channel’s broadcast appears on the TV screen,
then press .
3
If the sound of the desired channel is abnormal, select the appropriate TV
system.
(1) Press V or v to select “TV System”, then press
.
(2) Press V or v until the sound becomes normal, then press
4
.
If you are not satisfied with the picture and sound quality, you may be able
to improve them by using the “Fine” tuning feature.
(1) Press V or v to select “Fine”, then press
.
(2) Press V or v to select “Manual”, then press
.
(3) Press V,v,B or b until the picture and sound quality are optimal, then press
.
The + or – icon on the menu flashes while tuning.
5
If you want to skip this program number when using PROG +/–, you can
select the “Skip” feature.
(1) Press V or v to select “Skip”, then press
(2) Press V or v to select “On”, then press
To cancel, select “Off”, then press
20
.
.
.
Menu Adjustment
01GB06ADJ-MIX.p65
20
24/7/03, 3:17 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
x Changing the “Setup” setting
The “Setup” menu allows you to change the menu language, change the picture
size, label the connected equipment, select the color system and enjoy audio
equipment sound.
1
2
Press MENU.
Press V or v to select the “Setup” icon
( ), then press .
Setup
Language:
Wide Mode:
Video Label
Color System:
Portable Audio Mode:
Select
3
To
“Language”
change the menu language.
Press V or v to select either “English” or “
.
Auto
Off
End
Confirm
Press V or v to select the desired item (e.g., “Language”), then press
Select
English
Off
.
” (Arabic), then press
“Wide Mode”
choose either “On” or “Off” (see page 9).
“Video Label”
label the connected equipment.
(1) Select “Video Input” and press
.
Press V or v to select the input you want to label, then press
.
(2) Select “Label” and press
, then press V or v to select the label
options: ”Video 1/Video 2/DVD”, “VCR”, “SAT”, “Game” or
“Edit”*.
* You may edit the video label by entering alphanumeric
characters.
“Color System”
select the color system.
Press V or v to select either “Auto”, “PAL”, “SECAM”, “NTSC3.58”
. Normally, set this to “Auto”.
or “NTSC4.43”, then press
“Portable Audio
Mode”
enjoy the sound of audio equipment through the TV speakers while
viewing picture from other inputs.
Press V or v to select the input connected to your audio equipment:
“Video1” or “Video2”, then press
. You may change the picture
while listening to the fixed audio input.
To cancel Portable Audio Mode, select “Off” or turn off the TV.
Menu Adjustment
01GB06ADJ-MIX.p65
21
24/7/03, 3:17 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
21
Additional Information
x Connecting the 3D WOOFER
B KV-HW21M83 only
You can enjoy high quality sound by connecting the 3D WOOFER as follows:
Step 1
3D WOOFER
Step 2
Red wire
Black
wire
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make sure that none of the 3D
WOOFER wire strands stick out, making contact with the neighbouring 3D WOOFER terminal.
x Connecting optional components
Connecting to the video input terminal ( t )
Audio/Video cable
(not supplied)
TV front panel
2
L (MONO)
Audio cable
(not supplied)
R
Camcorder
TV rear panel
Walkman
Antenna cable
(not supplied)
1
Y
CB
(MONO)
L
L
CR
R
(MONO)
Audio/Video cable
(not supplied)
R
VCR
Note
• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the
program number 0 on the TV (see page 20).
22
Additional Information
01GB07ADJ-MIX.p65
22
24/7/03, 3:18 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
Connecting to the monitor output terminal ( T )
TV rear panel
Audio system
1
Y
CB
(MONO)
L
L
Audio/Video
cable
(not supplied)
(MONO)
CR
R
R
VCR
Connecting to the component video input terminal (
)
TV rear panel
Component video
cable
(not supplied)
1
Y
CB
(MONO)
L
L
(MONO)
CR
R
DVD player
R
Audio cable
(not supplied)
Notes
• If your DVD player can output interlace and progressive mode signals, select the interlace
output when connecting to
(component video input) on your TV. Your TV can receive
either 525i/60Hz or 625i/50Hz interlace signals.
• Some DVD player terminals may be labeled differently:
Connect
To (on the DVD player)
Y (green)
Y
CB (blue)
CB, PB, Cb or B-Y
CR (red)
CR, PR, Cr or R-Y
• If you select “DVD” on your TV screen, the signal from the T (monitor output) jacks will not
be output properly. This does not indicate a malfunction.
Additional Information
01GB07ADJ-MIX.p65
23
24/7/03, 3:18 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
23
x Troubleshooting
If you find any problem while viewing your TV, please check the following
guide. If any problem persists, contact your Sony dealer.
Troubleshooting guide
Symptom
Snowy picture
Noisy sound
Possible cause
Solutions
Page
• The connection is loose • Check the antenna cable and connection
or the cable is
on the TV, VCR and at the wall.
damaged.
22
• The antenna setup is
inappropriate.
• Check the antenna setup.
Contact a Sony dealer for advice.
–
• Channel presetting is
inappropriate or
incomplete.
• Display the “Channel Setup” menu and
select “Manual Program” to preset the
channel again.
20
• Signal transmission is
low.
• Try using a booster.
–
• Turn off or disconnect the booster if it is in
use.
–
Distorted picture • Broadcast signals are
too strong.
Noisy sound
Good picture
• The TV system setting • Display the “Channel Setup” menu and
select the appropriate “TV System”.
is inappropriate.
20
Noisy sound
No picture
• The power cord,
antenna or VCR is not
connected.
• Check the power cord, antenna and VCR
connections.
22
• The TV is not turned
on.
• Press ?/1 (power).
9
• Press ! (main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
8
No sound
24
Additional Information
01GB08ADV-MIX.p65
24
24/7/03, 3:18 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
Symptom
Good picture
Possible cause
Solutions
Page
9
• The volume level is too • Press 2 + to increase the volume level.
low.
• The sound is muted.
• Press
No sound or
inappropriate
sound
• The Portable Audio
Mode is functioning.
• Display the “Setup” menu and set the
“Portable Audio Mode” to “Off”.
Dotted lines or
stripes
• Do not use a hair dryer or other
• There is local
interference from cars,
equipment near the TV.
neon signs, hair dryers,
power generators, etc. • Check the antenna setup. Contact a Sony
dealer for advice.
9
to cancel the muting.
No sound
–
–
• Use a highly directional antenna.
–
• Use the fine tuning (“Fine”) function.
20
• The antenna setup is
inappropriate.
• Check the antenna setup. Contact a Sony
dealer for advice.
–
• Use of a booster is
inappropriate.
• Turn off or disconnect the booster if it is in
use.
–
• The color level setting
is too low.
• Display the “Picture” menu and select
“Personal” of “Mode”, then adjust the
“Color” level in “Picture Adjustment”.
15
• The color system
setting is
inappropriate.
• Display the “Setup” menu and check the
“Color System” setting (usually set this to
“Auto”).
21
• The antenna setup is
inappropriate.
• Check the antenna setup. Contact a Sony
dealer for advice.
–
Double images or • Broadcast signals are
“ghosts”
reflected by nearby
mountains or
buildings.
No color
21
continue
Additional Information
01GB08ADV-MIX.p65
25
24/7/03, 3:18 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
25
continued
Symptom
Page
• Keep external speakers or other electrical
equipment away from the TV.
–
Abnormal color
patches
• Keep external speakers or other
• The magnetic
equipment away from the TV. Do not
disturbance from
move the TV while the TV is turned on.
external speakers or
Press ! (main power) on the TV to turn
other equipment, or the
off the TV for about 15 minutes, then turn
direction of the earth’s
it on again to demagnetize the TV.
magnetic field may
affect the TV.
–
The 1 (standby)
indicator on
your TV flashes
red several
times after
every three
seconds.
• Your TV’s selfdiagnosis function
indicates the possible
problems.
• Count the number of times the 1
(standby) indicator flashes. Press !
(main power) to turn off your TV.
Contact your nearest Sony service center.
–
TV cabinet
creaks.
• Changes in room
temperature sometimes
make the TV cabinet
expand or contract,
causing a noise. This
does not indicate a
malfunction.
—
–
Good mo
rning!
A small “boom”
sound is heard
when the TV is
turned on.
26
Possible cause
Solutions
Picture slant
• The magnetic
disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
• The TV’s demagnetizing
function is working.
This does not indicate a
malfunction.
—
–
Additional Information
01GB08ADV-MIX.p65
26
24/7/03, 3:18 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
x Specifications
KV-HW21M83
Power requirements
110-240 V AC, 50/60 Hz
Power consumption (W)
Indicated on the rear of the TV
Television system
B/G, I, D/K, M
Color system
PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43
Channel coverage
B/G
VHF : E2 to E12
UHF : E21 to E69
CATV : S01 to S03, S1 to S41
I
UHF : B21 to B68
CATV : S01 to S03, S1 to S41
D/K
VHF : C1 to C12, R1 to R12
UHF : C13 to C57, R21 to R60
CATV : S01 to S03, S1 to S41, Z1 to Z39
M
VHF : A2 to A13
UHF : A14 to A79
CATV : A-8 to A-2, A to W+4, W+6 to W+84
8 (Antenna)
75-ohm external terminal
Audio output (Speaker)
3W+3W
5W+5W
9W
––
3D Woofer
Number of terminal
(Video)
Input: 2
Output: 1
(Audio)
Input: 2
Output: 1
(Component
Video)
i (Headphone)
Input: 1
Phono jacks; 1 Vp-p, 75 ohms
Phono jacks; 500 mVrms
Phono jacks;
Y: 1 Vp-p, 75 ohms,
sync negative
CB: 0.7 Vp-p, 75 ohms
CR: 0.7 Vp-p, 75 ohms
Audio: 500 mVrms
Output: 1
Stereo minijack
21 in.
Picture tube
Tube size (cm)
54
Screen size (cm)
51
Dimensions (w/h/d, mm)
Note
KV-HW21M80
Measured diagonally
Measured diagonally
630 × 470 × 492
630 × 460 × 492
27
25
Mass (kg)
Design and specifications are subject to change without notice.
Sony Corporation
Additional Information
01GB08ADV-MIX.p65
27
24/7/03, 3:18 PM
Sony KV-HW21M83 Group A19 (GB)_4-098-348-11(1)
27
Download PDF

advertising