Powered Raceway - Strand Lighting
Strand Distributed Dimming Systems
Powered Raceway
R21 Powered Raceway Distributed Dimming System
R21 Powered Raceway from Strand Lighting is a perfect
extension of our C21 and A21 range of installed dimmer
cabinets. Systems can be mixed and matched as needed to
create a completely flexible lighting system to meet the needs of
any installation. Our powered raceway features quiet convection
cooled IGBT dimming for low lamp noise and reliable operation.
Strand Lighting’s powerful ShowNet Ethernet network allows
easy integration of your entire lighting system with consoles,
houselight systems and fixed dimming racks all connecting
seamlessly over a network. The heart of the system is our
powerful Raceway processor which mounts remotely in an easy
to access auxiliary rack (auxiliary rack sold separately). One
processor can control up to 96 dimmers over multiple raceways
simplifying set up and operation. Our Report.net software allows
remote status monitoring over our network.
Each raceway can have a mixture of dimmed circuits and relay
modules for a wide variety of applications. Several hanger
options are available for pipe mount and wall mount applications
to meet the needs of any installation.
Features
• Fully Digital Powered Raceway
• Wide range of load connector options
• DMX512 I/O
• Integrates with Strand C21 and A21 Dimmers
• Simplified Data distribution over ShowNet Networking
• Dimmer Status reporting standard
• Remote processor option provides support for up to 96
dimmers and relays
• Hangers available for Wall and pipe mount applications
• Energy efficient – only a 2.5 volt insertion loss per dimmer
module
• Our "Z-Fold Tiered Packaging" is designed to accommodate
the use of palette jacks and forklifts to transport the
R21 Powered Raceway from our factory to your job site.
This unique shipment method also assures that your R21
Powered Raceway arrives at your project site scratch and
dent free.
• Local Focus buttons and status display
• UL and cUL listed and labeled
• Dimmer modules offer 1000 S transition time significantly
reduces lamp sing
• Custom lengths and configurations are available
• Quiet convection cooled dual IGBT dimmer modules - 2400
Watts per module
• Dual relay modules for on/off operation - 20 Amps per
module
• Automatic Short Circuit protection
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
Strand Distributed Dimming Systems
Powered Raceway
R21 Powered Raceway Mounting Hardware
Single-Pipe Rigged Hanger
Bracket (71440)
Single-Pipe Overhung Hanger
Bracket (71444)
1-1/2 Inch Schedule 40 Pipe
(not provided, available through others)
1-1/2 Inch Schedule 40 Pipe
(not provided, available through others)
Double-Pipe Rigged Hanger
Bracket (71441)
Double-Pipe Offset
Hanger Bracket (71443)
1-1/2 Inch Schedule 40 Pipe
(not provided, available
through others)
1-1/2 Inch Schedule 40 Pipe
(not provided, available
through others)
Wall Mount
Hanger
Bracket
(71442)
Threaded Rod
Bracket (71445)
Hardware to secure to wall (not
provided, available through others)
1-1/2 Inch Schedule 40 Pipe
(not provided, available
through others)
Note: Brackets must be spaced every five feet (or less) per NEC® requirements.
Strand Distributed Dimming Systems
Powered Raceway
R21 Powered Raceway Components
Power Feed Multi-conductor Cable
with Strain Relief (optional)
Hanger Bracket
- six types available
FRONT VIEW
Relay Modules
(2 Relays, 20 Amps total)
Dual Dimmer Modules
(2400 Watts total)
Power Terminal
Box (PTB)
Flush Receptacle (choice of stage pin,
twistlock, or Edison connectors)
Focus Button /
LED Indicator
DMX Single
Plate (output)
Pigtail Receptacle - Standard Length 18"
(choice of stagepin, twistlock, or Edison
connectors)
DMX Headend
(one required per universe)
SIDE VIEW
Control Cable
Tray (optional)
1-1/2" Schedule 40 Pipe
(not provided, available by others)
3.469"
19.0"
Rack Mount Processor
Front View
Notes:
(1) Example configurations shown for illustrative purposes only. Actual components and
configurations will vary per requirements.
(2) All components are pre-wired at the factory except terminal box input connections.
Rack Mount Processor
Rear View
Powered Raceway
Strand Distributed Dimming Systems
Technical Information
Number of Circuits:
Up to 96 Dimmers / Relays (48
modules)
Output Voltage:
115/120 Volts AC (max.)
Minimum Load:
1 watt
Maximum Load:
2400 Watts (per dimmer module)
20 Amps (per relay module)
Insertion Loss:
2.5 Volts AC (max.)
Power Feed:
3-Phase, 4 Wire 120/208 volts,
20 Amps per 3 Dimmer Modules
Frequency:
50/60Hz
Ambient Temperature: 32 to 104o F / 0 to 40o C
Humidity:
5%-95% Non-Condensing
Cooling:
Height:
Depth:
Length:
Weight:
Connector Types:
Natural Convection
6 in. (14.5 in. with terminal box)
5.25 in. (Including dimmer module
heatsink)
8 to 96 Feet
Up to 6.5 lbs. per Foot
GP – Grounded Stage Pin
GTL – Twistlock
GR – Edison NEMA 5-20R
Ordering Information
Cat No.
Description
R21 Powered Raceway
DMX Output Options
96350- aa-bb(bb)-cc(cc)-dd(dd)-e(e)-ff(ff)
96350-DMXHE R21 Raceway Headend (one required per
universe)
96350-DMX
R21 Raceway DMX Single Plate (A5F panel
connector)
aa
bb
(bb)
cc
(cc)
dd
=
=
=
=
=
=
(dd) =
e =
(e) =
ff =
(ff) =
Total Length in Feet
Number of 2400 Watt Dual-Dimmer Modules
Number of 20 Amp Dual Relay Modules
Number of Dimmer Load Connectors
Number of Relay Load Connectors
Dimmer Load Connector Type (GP - Grounded
Stage Pin / GTL - Twistlock / GR - Edison)
Relay Load Connector Type (GP - Grounded Stage
Pin / GTL - Twistlock / GR - Edison)
Dimmer Connector Style (F - Flush / P - Pigtail)
Dimmer Connector Style (F - Flush / P - Pigtail)
If Pigtail, Specify Dimmer Module Pigtail Length in
Inches (note, standard length is 18 inches)
If Pigtail, Specify Relay Module Pigtail Length in
Inches (note, standard length is 18 inches)
Mounting Hardware
71440
71441
71442
71443
71444
71445
Single-Pipe Rigged Hanger Bracket
Double-Pipe Rigged Hanger Bracket
Wall-Mount Hanger Bracket
Double-Pipe Offset Hanger Bracket
Single-Pipe Overhung Pipe Hanger Bracket
Single-Pipe Threaded Rod Hanger Bracket
Philips Strand Lighting
Dallas
10911 Petal Street
Dallas, TX 75238
Tel: +1 (214) 647-7880
Fax: +1 (214) 647-8031
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: + 64 9 481 0100
Fax: + 64 9 481 0101
Asia
Unit C, 14/F,
Roxy Industrial Centre
No. 41-49 Kwai Cheong Road
Kwai Chung, N.T., Hong Kong
Tel: +852 2796 9786
Fax: +852 2798 6545
Europe
European Service & Distribution Centre
Rondweg zuid 85
Winterswijk 7102 JD
the Netherlands
Tel: +31 (0) 543-542516
010214NA
www.strandlighting.com
© Philips Group 2014
All rights reserved.
The Company reserves the right to make any variation in
design, construction or descriptions contained herein,
of the equipment, at any time without prior notice. E&OE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement