lcd monitors
LCD MONITORS
Faithful to the original
The Image Aesthetic of
Charactor イ on CRT
The history of JVC monitors overlaps with that of the birth and
development of Japanese monitors, which can be traced back
to Dr. Kenjiro Takayanagi, known in Japan as the “father of
television”. When Dr. Takayanagi, in 1925, first displayed the
Japanese character “イ" on a CRT, he laid the foundation for a
development approach that is stronger today than ever before.
The path opened up by this has lead to a stream of landmark
technical achievements for the company.
Since the launch of our first colour television in 1960, our
progress has been marked with evolving mass-production
systems that consistently achieve higher performance, lower
costs, and enhanced quality control. JVC’s line-up of colour
monitors embraces the concept of “image communication” to
provide an interface between mind and technology. So,
whatever your application, JVC has a monitor that delivers the
features and sophistication that you need.
Throughout its history, JVC’s tireless pursuit for high quality
images has driven the company to realise unique technologies
and images embodying the company’s enthusiasm for the
“creation of images” that bring the creators’ intentions and
beliefs to life. This is the origin of the image aesthetic of JVC
monitors.
2 JVC LCD MONITORS
The biggest transition in the history of monitors occurred with
the dawn of the current hi-vision era. At the time, JVC had
already established its own image aesthetic based on the
concept of “creation of a calm image with low black
luminance”. This “smooth image” is highly praised by
professionals.
Full-fledged production of HD contents is now underway in the
current era of full high-vision definition, and JVC’s image
aesthetic has further evolved and been adapted to LCD
monitors. Its smooth and calm black image matches well with
high definition.
JVC’s LCD monitor series features analogue-like natural images
by keeping the digitization of input signals to a minimum.
Minimal digitisation processing is also applied to moving images,
succeeding in offering constant sharp and clear images with
deep black technology by means of optimised IP conversion.
JVC’s original image processor, with its particular emphasis on
“reproduction of raw signals”, has succeeded in reproducing
high-definition signals used in a production site into images with
unconstrained definition and sharpness.
JVC Monitors
JVC LCD MONITORS 3
JVC Techno WING gathering of leading-edge technology
This example shows how the high performance of the DT-V series is verified and introduced in the OB-VAN.
The Image Aesthet
JVC LCD MONITORS 5
While media and signalling systems have changed, and flat
displays have become the mainstream in the field of display
devices, JVC’s basic philosophy of image creation remains
unchanged.
Moreover, JVC’s technical capabilities are verified by various
tests conducted by the quality control division, including tests in
a large thermostat, a medium-sized and a small-sized constant
temperature/humidity chamber, a vibration testing system, and
a central signal room.
Ultra-low temperature performance test
Tests products around the minimum temperature to verify
fatigue due to the different shrinkage and expansion factors of
plastic and metal.
High Constant Temperature
High temperature test
Verifies basic performance and functions of products at high
temperatures.
Vibration test system
Verifies products by applying random vibration in three
directions (X, Y, Z) simultaneously. Data is acquired by a sensor
incorporated in products with specifications of various countries
or which are actually shipped. Products are verified by
multiplying the data with the acceleration factor.
Long-term running test
Highly innovative systems are tested for about 50,000 hours
after shipment to determine the average time when the first
failure will occur. The data thus gained is applied to customer
services and the development of the next system.
High temperature and humidity test
Evaluates products in a high humidity environment. This a very
important test in terms of moisture absorption and the
difference in air pressure due to humidity at each part.
Temperature stress test
Verifies the marginal utility of products by applying
high-temperature stress for short-term product development.
Low temperature performance test
Verifies the basic performance and functions of products at
low-temperature start-up.
Thermal shock test
Reliability testing by means of thermal fatigue is a vital process.
Testing is made over a long period of time, with high and low
temperatures being repeatedly applied to the products.
Central signal room
The room transmits TV broadcasting systems all over the world
(digital, analogue). These signals are shared among the
process of development, design and quality assurance, so that
products are efficiently promoted. The signals transmitted here
are compliant with stricter standards than broadcasting
standards.
These tests make it possible to deliver more stable and higher
quality monitors.
JVC monitors, supported by JVC’s image-creation transition
and its own technologies and stable quality, have been highly
acclaimed by users involved in world broadcasting and
television production. They are the perfect choice for any critical
monitoring application.
tic of JVC Monitors
JVC LCD MONITORS 6
HD-SDI
HD-SDI
HD-SDI
CONTROLS
INPUT TERMINALS
HD-SDI
DT-V24L3D
DT-V20L3D
Gold plated
Gold plated
HD/SD-SDI
Gold plated
—
✓
✓
In/Out
In/Out
In/Out
In/Out
Speaker
Stereo
Stereo
Stereo
Mono
RS-232C
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
—
✓
✓
✓
✓
—
—
✓
✓
—
—
—
✓
Option
Option
Option
✓
—
✓
✓
✓
✓
RS-485
Make/trigger
Tally lamp
Time code
FUNCTIONS
Gold plated
Audio
Safety marker
CRC error
Audio level meter
Source ID display
1:1 mode
I/P mode
Waveform monitoring
INSTALLATION
DT-V9L1D
DVI-D
Area marker
OPERATION
DT-V17L3D
Stand (Tilt & hight adjustable)
Rack mount
VESA
Carrying handle
Power
PIXELS
▲
▲
▲
✓
AC
AC
AC/DC
AC/DC
☞P10
☞P11
☞P12
☞P13
W-UXGA
DT-V24L3D
UXGA
GM-F520F
GM-F420S
HD-SDI
1920x1200
FULL-HD
FULL-HD
FULL-HD
GM-F470S
1600x1200
W-SXGA+
HD-SDI
1680x1050
DT-V20L3D
SXGA+
1400x1050
SXGA
1280x1024
TM-17L2D
LM-H171
SD-SDI SD-SDI
STANDARD STANDARD
TM-19L2D
LM-H191
QVGA
1280x960
HD-SDI
W-XGA
DT-V17L3D
1280x768
XGA
1024x768
W-VGA
800x480
HD-SDI
DT-V9L1D
VGA
640x480
10
20
30
40
50
▲
▲
▲
LCD PANEL SIZE (inches)
6 JVC LCD MONITORS
Narrow
STANDARD
FULL-HD
LM-H191
LM-H171
GM-F520S GM-F470S GM-F420S
FULL-HD
✓
—
✓
—
—
✓
—
✓
—
✓
—
✓
—
✓
In/Out
In/Out
In/Out
In/Out
In/Out
In/Out
In/Out
Audio
Mono
Mono
Mono
Mono
Stereo
Stereo
Stereo
Speaker
—
—
✓
—
✓
—
✓
✓
—
—
—
—
—
✓
—
—
✓
✓
—
—
—
—
—
—
✓
—
—
✓
✓
—
—
—
—
✓
✓
✓
✓
—
✓
—
—
✓
✓
✓
✓
✓
✓
✓
—
✓
—
—
✓
✓
✓
✓
✓
✓
✓
—
✓
—
—
✓
✓
✓
RS-232C
—
—
✓
—
✓
—
✓
✓
—
—
—
300 cd/m
300 cd/m
300 cd/m
300 cd/m
—
—
✓
—
—
✓
—
—
✓
—
—
✓
Option
Option
Option
2
2
2
2
700 cd/m
2
700 cd/m
2
SDI x 2
DVI-D
RS-485
Make/trigger
Tally
lamp
LAN Remote
Tally
lamp
Picture
mode
CTI/LIT mode
Picture
CTI/LTI
1:1 mode
Native
HD 1920 x 1080
1:1
mode
MotionHD
Sensor
Native
1920 x 1080
PIP/PBPSensor
Motion
High Brightness 700 cd/m2
PIP/PBP
700 cd/m
2
✓
✓
✓
✓
✓
✓
✓*
—
✓
AC
AC
AC
AC
AC
AC
AC
☞P15
☞P15
☞P16
☞P18
☞P18
☞P18
Option
☞P16
Status display (DT-V series)
INPUT TERMINALS
FULL-HD
CONTROLS
TM-19L2D TM-17L2D
STANDARD
FUNCTIONS
SD-SDI
24-hour
7 days operation
High
Brightness
✓
✓
✓*
—
✓
✓
✓
✓*
—
✓
Slim bezel
24-hour
7 days operation
Power
Slim
Standbezel
(Tilt & hight adjustable)
Rack mount
Stand
(Tilt & hight adjustable)
VESA mount
Rack
Power
VESA
OPERATION INSTALLATION
SD-SDI
*No tilt or height adjustments
Selectable picture modes (LM and GM series)
Standard
Dark enhanced
Standard
Vivid
Standard
Dynamic
Motion sensor (GM series)
(TM seires)
Overscan
1:1
JVC LCD MONITORS 7
DT-V24L3D
DT-V20L3D
DT-V17L3D
DT-V9L1D
Features of DT-V Series
High quality pictures
 Compatible with multiple HD/SD formats
The DT-V24L3D, DT-V20L3D, and DT-V17L3D are all equipped with a full
set of HD-compatible inputs. These include two auto-sensing HD/SD
inputs, one SDI switched output, and one set of component
inputs/outputs. In addition, an HDCP-compatible DVI input is provided for
PC connection. The DT-V9L1D is equipped with one auto-sensing HD/SD
SDI input, one SDI switched output, and one set of component
inputs/outputs.
 Exclusive JVC image processing technology
We’ve taken our leading-edge image processing technology and refined it
to meet the requirements of HD digital imaging systems. Featured within
the DT-V24L3D, DT-V20L3D, DT-V17L3D are 10-bit processors and
DT-V9L1D is a 8-bit real-time processor, this new system delivers true
professional performance, eliminating superfluous processing to ensure
natural, analogue-style digital image reproduction, while optimising input
conversion to maintain sharp, clear images at all times — even with
fast-moving content. JVC’s advanced technology also eliminates many of
the problems inherent in digital circuits, such as diagonal jaggies, block
noise, and mosquito noise, while our exclusive enhancer technology
provides accurate image outline correction. The end result is clearly visible
on the screen with smoother resolution and crisper, sharper images.
 Waveform monitoring
The new waveform monitor on the DT-V24L3D, DT-V20L3D, and
DT-V17L3D can be positioned in any of the four corners of the screen and
features an ‘over’ level function, offering clear indication of possible problem
areas. In addition, the monitors feature greatly reduced delay between input
signal and image display, thus ensuring faithful picture reproduction, and
are widely used throughout the post and broadcast industries.
 Gamma calibration*1
In professional video production, accurate image display is a must. By
calibrating each unit’s gamma at the factory before it is shipped, JVC is
able to ensure extremely precise grey scale characteristics.
 High-performance liquid crystal panels
Wide viewing angles, high brightness, excellent focus and contrast
performance set JVC’s industry-leading DT-V series apart from the
competition. In addition, these advanced LCD monitors feature minimal
delay between input signal and image display, thus ensuring faithful picture
reproduction.
Before calibration
System flexibility
 Colour temperature setting
Three colour temperature settings are provided: 9,300°K, 6,500°K, and
one user-defined setting.
 4-way remote control
Remote control can be selected from make-contact, trigger-pulse, RS-485
(excluding DT-V9L1D), and RS-232C methods.
0.9
 Faithful colour reproduction*1
Matrix parameters are set in
response to the actual HD or SD
input signal. This makes it
possible to accurately reproduce
colours in strict conformity with
ITU standards without having to
process color signals. A
chromatic range equivalent to
EBU 100%, ensures colour
reproduction that is virtually
identical to the original.
520
530
0.8
540
510
0.7
550
EBU
560
0.6
570
500
0.5
580
590
0.4
600
610
620
630
640
650
700~780
0.3 490
0.2
480
0.1
470
460
0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
INPUT SIGNAL FORMAT
Standard Setting
Preset Format
SDTV
ITU-R BT.601
PAL, NTSC, SECAM*2: 480i, 576i, 480p, 576p
HDTV
ITU-R BT.709
720p, 1035i, 1080i, 1080p
*1: DT-V24L3D, DT-V20L3D and DT-V17L3D only
8 JVC LCD MONITORS
After calibration
0.8
Functions controlled by MAKE/TRIGGER system
Display
Functions to be controlled
DT-V24L1D DT-V20L1D DT-V17L2DU DT-V9L1DU
COLOR OFF
Color off
✓
✓
✓
✓
ASPECT
Changes the aspect ratio.
✓
✓
✓
✓
A.MARKER
AREA MARKER display
✓
✓
✓
✓
S.MARKER
SAFETY MARKER display
✓
✓
✓
✓
TIME CODE
Time code display
✓
✓
✓
1:1
Displays in 1:1 mode.
✓
✓
✓
SCR CHECK
Screen check
✓*1
✓*1
✓
✓
I/P MODE*1
IP MODE
✓
✓
✓
SDI 1
Changes the input to SDI 1.
✓
✓
✓
✓
SDI 2
Changes the input to SDI 2.
✓
✓
✓
DVI
Changes the input to DVI.
✓
✓
✓
COMP. /RGB
Changes the input to COMPO. /RGB.
✓
✓
✓*2
✓*3
VIDEO 1
Changes the input to VIDEO 1.
✓
✓
✓
VIDEO 2
Changes the input to VIDEO 2.
✓
✓
EXT.SYNC
Changes the sync signal.
✓
✓
TALLY
Controls the tally lamp.
✓
✓
✓*4
✓*4
TALLY SEL
Selects the color of the tally lamp.
✓
✓
✓
✓
MONI. NAME
MONITOR NAME
✓
✓
✓
✓
MUTING
Muting on/off
✓
✓
✓
✓
MARK.SEL
Selects the items of AREA MARKER.
✓
✓
✓
✓
L.METER
Audio level meter display
✓
✓
✓
✓
STATUS
Status display
✓
✓
✓
✓
--No function
✓
✓
✓
✓
FOCUS ASSIST
Focus adjustment
✓
DYNAMIC
Optimization of the brightness
✓
COLOR RANGE MODE
Reduction of the gradation step
✓
For customization, select 8 functions and assign them to 8 pin terminals. *1: TRIGGER pulse
control only *2: Component only *3: Video/component *4: Indication cannot be displayed.
Battery powered operation enhances mobility
 Dual power source
The DT-V17L3D and DT-V9L1D can be powered by a standard AC
connection or by 12V DC batteries (Anton Bauer, IDX or PAG) installed
via bracket on the rear panel. This dual power system makes these two
monitors extremely versatile, enabling HD image review in the field.
platform simply by removing the stand. The DV-9L1D can be tilted 10°
forward and 20° backward even when batteries are installed, permitting
easier image confirmation.
 DT-V24L3D/DT-V20L3D/DT-V17L3D
6°
8°*
6°
12°*
DT-V17L3D
TM-19L2D
TM-17L2D
LM-H191
LM-H171
*DT-V17L3D
DT-V9L1D
As a conventional desktop stand,
showing 6˚ of tilt in both directions
As a rear support when monitor is resting
directly on a flat surface
 DT-V9L1D
10°
 Anton Bauer
Battery: DIONIC 90
Mount: QR DXC-M3A
 IDX
Battery: ENDURA-7S
Mount: C-EB (XLR)
Attachment plate: A-EB2J
Product number for
the set in Europe
IDX-JC-EB (XLR)
20°
The DT-V9L1D’s stand can be tilted
even when batteries are installed,
permitting easier image confirmation.
and does not fall down.
* The DT-VI7L3D’s stand can also be
tilted with batteries installed.
Easy installation
Can be tilted 10° forward and 20°
backward
 Compact, all-in-one design
Thanks to a slim, space-saving, all-in-one design, these monitors can be
installed easily on any wall, shelf, or rack and in a variety of locations
such as an OB van, studio control room, or editing studio.
 VESA-compliant design
VESA-standard screw holes of 100mm x 100mm pitch are provided. The
rigidly constructed rear panel makes all the monitors eminently suitable
for wall mounting.
Can be placed directly on a flat surface and tilted in a
confined space.
Rugged, durable design
 Connector protection structure
To prevent any damage to the control panel, it is protected by a speaker
grille and reinforced edge design. The rear panel connectors are
protected by a concave design. This slim, efficient construction is both
practical and safe.
 Rack-mounted design
 Metal rear cabinets
The DT-V20L3D is designed to fit on the optional RK-C20D1, at a height
of 9U. The DT-V17L3D can be installed in a standard EIA rack with a
height of 7U and a width of 17”. As for the DT-V9L1D, two units can be
rack mounted side by side within a standard EIA rack with a rack height
of 4U.
Rugged metal rear cabinets provide excellent heat radiation and greater
durability.
DT-V20L3D and
RK-C20D1
 Convenient grip handle
The DT-V17L3D and DT-V9L1D
are fitted with a convenient
self-retracting grip handle
for easy mobility. The handle
contains a metal belt for strength.
DT-V9L1D
 Protective screen
(option)
RK-C20D1
 Adjustable stand
The metal table-top stand can be tilted up or down by 6° for
easier viewing and more flexible installation. When height is
restricted the monitor frame can also be installed directly on a shelf or
DT-V17L3D
To keep the LCD panel clean and
protect it from scratches or
damage, optional screen
protection filters are available. These protection filters also suppress
reflections when the panels are under bright light. The DT-V9L1D is
provided with a protective screen as standard.
Application (JVC Shoulder Mount Fiber System)
DT-V Series
LCD Monitor
RM-LP25U
RM-LP57U
RM-LP55U
Camera
Remote units
HD-SDI
KA-R25U
Return Video Module
GY-HD250U
HD-SDI
KM-H3000/KM-H2500
HD SDI switcher
CCU Base station
Hybrid cable
(BNC and ST Fiber)
JVC LCD MONITORS 9
DVI-D
Audio
In/Out
INPUT TERMINALS
HD/SD SDI
Gold-plated
DT-V SERIES
DT-V24L3D
24” Native HD Multi-Format Studio Monitor
Speaker
Stereo
RS-232C
DT-V20L3D
DT-V24L3D
Make/
trigger
Area marker
Safety
marker
Tally lamp
Applicable Standard
Audio Output
Environmental Conditions
Source ID
display
Achieving HD images, faithful to original
signals, with less than one frame of latency
1:1 mode
I/P mode
Features
Stand
(Tilt & hight
adjustable)
VESA
Power
AC
OPERATION INSTALLATION
Waveform
monitoring
Rear Panel
DT-V17L3D
 1920x1200 pixels
 Circuits that deliver low latency of less than one frame
 Waveform monitoring with over level function
 Gold-plated HD/SD SDI terminals with embedded audio
 DVI-D with HDCP terminal
 High-performance LCD panel
 Exclusive JVC image processing technology
 Status display in unused section of 16:10 panel
 Wide selection of video production functions
 Easy-to-operate front panel controls
 Rugged, adjustable stand provided
 Source ID input by ASCII code
 Information position selectable
 Full screen mode for SD 4:3 signal
Status Display
Source ID
Status
Power Requirements
Rated Current
Dimensions (WxHxD)
excluding protrusions)
Weight
Option
Input/Output Terminals
Video
VIDEO 1
CRC error
Audio
Over level
Waveform
monitoring
External Control
Input Format
Signal name
Dimensions
COMPUTER
Input terminals
Video
DVI-D with
Component/
HD/SD SDI
HDCP (video)
RGB
Signal name
✓
̶
̶
̶
VGA60
✓
PAL
BW(50Hz/60Hz)
✓
✓
̶
̶
̶
̶
̶
̶
W-VGA60
✓
SVGA60
✓
480/60i
̶
✓
✓
✓
XGA60
✓
576/50i
̶
✓
✓
✓
480/60p
̶
✓
̶
✓
W-XGA60 (1280 x 768)
W-XGA+60 (1440 x 900)
✓
✓
576/50p
̶
✓
̶
✓
SXGA60 (1280 x 1024)
✓
640 x 480/60p
̶
̶
̶
✓
1920 x 1080@60/50
✓
720/24p, 25p, 30p
720/50p, 60p
̶
✓
✓
̶
1280 x 720@60/50
✓
̶
̶
✓
✓
✓
✓
✓
✓
W-SXGA+60 (1680 x 1050)
✓
U-XGA60(1600 x 1200)
✓
̶
̶
̶
✓
W-UXGA60 (1920 x 1200)
✓
1080/24psf, 30psf*1
Front Panel
10 JVC LCD MONITORS
̶
✓*
✓
✓*
̶
✓
✓
✓
̶
✓
✓
̶
1
1
99 (4)
DVI-D (PC)
NTSC
1080/50i, 60i
1080/50p, 60p
1035/60i
1080/24p, 25p, 30p
VESA
(M4, D: 10 mm)
Input terminals
*1: It is displayed by 1080/60i.
448.6 (17-3/4)(High)/
413.6 (16-3/8) (Low)
408 (16-1/8)
VIDEO
Composite video signal input/output: 1 line,
BNC x 2, 1 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection)
(auto termination)
DVI-D (HDCP)
DVI-D signal input (compatible with HDCP):
DVI-D connector x 1 (compatible with DDC2B)
COMPO./RGB
Analogue component signal/
(G/Y, B/Pb/B-Y, R/Pr/R-Y)
analogue RGB signal input/output: 1 line, BNC x 6
Video signal: G/Y: 1 V (p-p), 75 ohms (sync signal included),
B/Pb/B-Y, R/Pr/R-Y: 0.7 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection)
(auto termination)
EXT. SYNC (CS)
Composite sync signal input/output: 1 line, BNC x 2,
0.3 V (p-p) to 4 V (p-p), 75 ohms (bipolar tri-signal,
negative pole binary signals, BB) (video signals excluded)
(IN and OUT are connected with a bridge connection)
(auto termination)
HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO):
HD/SD SDI (IN 2)
Auto detection, 1 line, BNC x 1
HD/SD SDI (OUT)
Digital signal output
(compatible with EMBEDDED AUDIO)
1 line (switched out), BNC x 1
AUDIO ASSIGN (IN 1)
Analogue audio signal input:
AUDIO ASSIGN (IN 2)
1 line, RCA x 2, 500 mV (rms), high impedance
AUDIO ASSIGN (MONITOR OUT) Analogue audio signal output: 1 line, RCA x 2, 500 mV (rms)
MAKE/TRIGGER
RJ-45 x 1 (8-pin)
RS-485
RJ-45 x 2 (IN/OUT) (8-pin)
RS-232C
D-sub (9-pin) x 1
VIDEO 2
Level meter
*Information
can be
displayed in
the upper or
the lower
blank area.
With desktop stand
Without stand
Including stand
Excluding stand
Provided Accessories
Time code
Level meter
Operating temperature
Operating humidity
Storage temperature
DT-V9L1D
1.5
(1/16)
300 (11-7/8)
100
51.9 (2-1/8)
564 (22-1/4)
51
(2-1/8) 243 (9-5/8)
<Bottom of stand>
160 (6-1/4)
4-φ8
(1/4-ø1/2)
260 (10-1/4)
Option  TS-W24F1 (Protective screen)
20
(7/8)
145.7 (5-3/4)
Audio level
meter
FUNCTIONS
Time code
CRC error
DT-V24L3D
Multi-format HDTV/SDTV LCD monitor
Type 24 wide format
16:10
24" wide, active matrix TFT
518.4 x 324 mm (20-7/16 x 12-13/16 inches)
1920 x 1200 (W-UXGA)
16.7 million
176˚
176˚
400 cd/m2
1000:1
8 msec
31.469 kHz to 75.000 kHz
60 Hz ± 5 Hz
Depending on the signal within the range of these
frequencies, some signals may not be displayable,
in which case, "Out of range" is shown.
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Internal: 1.0 W + 1.0 W (L/R)
5˚C to 35˚C (41°F to 95°F)
20% to 80% (non condensing)
-25°C to 60°C (-13°F to 140°F)
AC 120/220-240 V, 50/60 Hz
1.15 A (AC 120V)
0.67 A (AC 220-240 V)
564 x 448.6 x 243 mm (22-1/4" x 17-3/4" x 9-5/8")
564 x 408 x 99 mm (22-1/4" x 16-1/8" x 4")
11.6 kg (25.5 lbs.)
8.7 kg (19.1 lbs.)
AC power cord, power cord holder,
screw x 2 (for power cord holder)
Protective screen
Model
Type
Screen Size
Aspect Ratio
LCD Panel
Effective Screen Size (W x H)
Pixels
Display Colours
Viewing Angle
Horizontal
Vertical
Brightness
Contrast Ratio
Response Time (G to G)
Horizontal/Vertical
Horizontal
Frequency (PC signals)
Vertical
Unit: mm (inches)
117 (4-5/8) 100
CONTROLS
RS-485
In/Out
Specifications
DT-V SERIES
HD/SD SDI
Gold-plated
INPUT TERMINALS
DT-V20L3D
20” HD Multi-Format Studio Monitor
DVI-D
Audio
In/Out
Speaker
Stereo
Specifications
Applicable Standard
Audio Output
Environmental Conditions
Achieving HD images, faithful to original
signals, with less than one frame of latency
Features
 1680x1050 pixels
 Circuits that deliver low latency of less than one frame
 Waveform monitoring with over level function
 Gold-plated HD/SD SDI terminals with embedded audio
 DVI-D with HDCP terminal
 High-performance LCD panel
 Exclusive JVC image processing technology
 Wide selection of video production functions
 Easy-to-operate front panel controls
 Rugged, adjustable stand provided
 1:1 mode with HD (1920 x 1080 pixel array)
 Source ID input by ASCII code
 Information position selectable
 Full vertical screen mode for SD 4:3 signal
Status Display
Source ID
Status
Power Requirements
Rated Current
Dimensions (WxHxD)
excluding protrusions)
Weight
Option
CRC error
Audio
Over level
External Control
Waveform
monitoring
Signal name
Input terminals
DVI-D (PC)
✓
̶
̶
̶
VGA60
✓
PAL
BW(50Hz/60Hz)
✓
✓
̶
̶
̶
̶
̶
̶
W-VGA60
✓
SVGA60
✓
480/60i
̶
✓
✓
✓
XGA60
✓
576/50i
̶
✓
✓
✓
480/60p
̶
✓
̶
✓
W-XGA60 (1280 x 768)
W-XGA+60 (1440 x 900)
✓
✓
576/50p
̶
✓
̶
✓
SXGA60 (1280 x 1024)
✓
720/24p, 25p, 30p
720/50p, 60p
1080/50i, 60i
1080/50p, 60p
1035/60i
1080/24p, 25p, 30p
1080/24psf, 30psf*1
̶
✓
1920 x 1080@60/50
✓
̶
✓
✓
̶
1280 x 720@60/50
✓
̶
̶
✓
✓
✓
✓
✓
✓
W-SXGA+60 (1680 x 1050)
✓
U-XGA60(1600 x 1200)
✓
̶
̶
̶
✓
W-UXGA60 (1920 x 1200)
✓
̶
✓*1
✓
✓*1
̶
✓
✓
✓
̶
✓
✓
̶
̶
CONTROLS
CRC error
Audio level
meter
Source ID
display
1:1 mode
I/P mode
Waveform
monitoring
Stand
(Tilt & hight
adjustable)
Rack
mount
(Option)
VESA
Power
AC
Power
AC/DC
Rear Panel
̶
*1: It is displayed by 1080/60i.
1.5
(1/16)
300 (11-7/8)
100
52.7 (2-1/8)
477 (18-7/8)
51
(2-1/8) 243 (9-5/8)
<Bottom of stand>
160 (6-1/4)
4-φ8
(1/4-ø1/2)
260 (10-1/4)
20
(7/8)
Unit: mm (inches)
117 (4-5/8) 100
DVI-D with
Component/
HD/SD SDI
HDCP (video)
RGB
NTSC
640 x 480/60p
Time code
VESA
(M4, D: 10 mm)
145.7 (5-3/4)
COMPUTER
Input terminals
Video
Tally lamp
99 (4)
394.6 (15-5/8)(High)/
359.6 (14-1/4) (Low)
354 (14)
VIDEO
Safety
marker
Composite video signal input/output: 1 line,
BNC x 2, 1 V (p-p), 75 ohms
VIDEO 2
(IN and OUT are connected with a bridge connection)
(auto termination)
DVI-D (HDCP)
DVI-D signal input (compatible with HDCP):
DVI-D connector x 1 (compatible with DDC2B)
COMPO./RGB
Analogue component signal/
(G/Y, B/Pb/B-Y, R/Pr/R-Y)
analogue RGB signal input/output: 1 line, BNC x 6
Video signal: G/Y: 1 V (p-p), 75 ohms (sync signal included),
B/Pb/B-Y, R/Pr/R-Y: 0.7 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection)
(auto termination)
EXT. SYNC (CS)
Composite sync signal input/output: 1 line, BNC x 2,
0.3 V (p-p) to 4 V (p-p), 75 ohms (bipolar tri-signal,
negative pole binary signals, BB) (video signals excluded)
(IN and OUT are connected with a bridge connection)
(auto termination)
HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO):
HD/SD SDI (IN 2)
Auto detection, 1 line, BNC x 1
HD/SD SDI (OUT)
Digital signal output
(compatible with EMBEDDED AUDIO)
1 line (switched out), BNC x 1
AUDIO ASSIGN (IN 1)
Analogue audio signal input:
AUDIO ASSIGN (IN 2)
1 line, RCA x 2, 500 mV (rms), high impedance
AUDIO ASSIGN (MONITOR OUT) Analogue audio signal output: 1 line, RCA x 2, 500 mV (rms)
MAKE/TRIGGER
RJ-45 x 1 (8-pin)
RS-485
RJ-45 x 2 (IN/OUT) (8-pin)
RS-232C
D-sub (9-pin) x 1
Dimensions
Input Format
Signal name
Area marker
Input/Output Terminals
Video
VIDEO 1
Level meter
*Status
information
can be
displayed in
the upper or
the lower
blank area.
With desktop stand
Without stand
Including stand
Excluding stand
Provided Accessories
Time code
Level meter
Operating temperature
Operating humidity
Storage temperature
RS-485
In/Out
Make/
trigger
FUNCTIONS
TM-17L2D
LM-H171
INSTALLATION
LM-H191
DT-V20L3D
Multi-format HDTV/SDTV LCD monitor
Type 20 wide format
16:10
20" wide, active matrix TFT
433.4 x 270.9 mm (17-1/8 x 10-11/16 inches)
1680 x 1050 (W-SXGA+)
16.7 million
178˚
178˚
470 cd/m2
700: 1
6 msec
31.469 kHz to 75.000 kHz
48 Hz - 65 Hz
Depending on the signal within the range of these
frequencies, some signals may not be displayable,
in which case, "Out of range" is shown.
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Internal: 1.0 W + 1.0 W (L/R)
5˚C to 35˚C (41°F to 95°F)
20% to 80% (non condensing)
-25°C to 60°C (-13°F to 140°F)
AC 120/220-240 V, 50/60 Hz
1.00 A (AC 120V)
0.60 A (AC 220 - 240V)
477 x 394.6 x 243 mm (18-7/8" x 15-5/8" x 9-5/8")
477 x 354 x 99 mm (18-7/8" x 14" x 4")
10.6 kg (23.3 lbs.)
7.7 kg (16.9 lbs.)
AC power cord, power cord holder,
screw x 2 (for power cord holder)
Protective screen/rack mount adapter
OPERATION
TM-19L2D
RS-232C
Model
Type
Screen Size
Aspect Ratio
LCD Panel
Effective Screen Size (W x H)
Pixels
Display Colours
Viewing Angle
Horizontal
Vertical
Brightness
Contrast Ratio
Response Time (G to G)
Horizontal/Vertical
Horizontal
Frequency (PC signals)
Vertical
Option  TS-W20F2 (Protective screen)
 RK-C20D1 (Rack mount adapter)
Front Panel
JVC LCD MONITORS 11
DVI-D
Audio
In/Out
INPUT TERMINALS
HD/SD SDI
Gold-plated
DT-V SERIES
DT-V17L3D
17” HD Multi-Format AC/DC LCD Monitor
Speaker
Stereo
Specifications
Model
Type
Screen Size
Aspect Ratio
LCD Panel
Effective Screen Size (W x H)
Pixels
Display Colours
Viewing Angle
Horizontal
Vertical
Brightness
Contrast Ratio
Horizontal/Vertical
Horizontal
Frequency (PC signals)
Vertical
DT-V20L3D
Area marker
Safety
marker
Tally lamp
DT-V17L3D
Time code
Applicable Standard
Audio level
meter
Source ID
display
FUNCTIONS
CRC error
1:1 mode
Audio Output
Environmental Conditions
Achieving HD images, faithful to original
signals, with less than one frame of latency
Features
I/P mode
Waveform
monitoring
Rack
mount
(Option)
VESA
INSTALLATION
Stand
(Tilt & hight
adjustable)
Power
AC/DC
OPERATION
Carrying
handle
Rear Panel
 1440x900 pixels
 AC/DC operation
 Circuits that deliver low latency of less than one frame
 Waveform monitoring with over level function
 Gold-plated HD/SD SDI terminals with embedded audio
 DVI-D with HDCP terminal
 High-performance LCD panel
 Exclusive JVC image processing technology
 Wide selection of video production functions
 Easy-to-operate front panel controls
 Rugged, adjustable stand provided
 1:1 mode with HD (1920 x 1080 pixel array)
 Source ID input by ASCII code
 Information position selectable
 Full vertical screen mode for SD 4:3 signal
 Light weight (7kg with tilt stand or 5.3kg without tilt stand)
Status Display
Source ID
Status
Time code
Power Requirements
Rated Current
Dimensions (WxHxD)
excluding protrusions)
Weight
Option
Input/Output Terminals
Video
VIDEO
Composite video signal input/output: 1 line,
BNC x 2, 1 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection)
(auto termination)
DVI-D (HDCP)
DVI-D signal input (compatible with HDCP):
DVI-D connector x 1 (compatible with DDC2B)
Analogue component signal
COMPO.
input/output: 1 line, BNC x 6
(Y, Pb/B-Y, Pr/R-Y)
Video signal: Y: 1 V (p-p), 75 ohms,
Pb/B-Y, Pr/R-Y: 0.7 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection)
(auto termination)
HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO):
HD/SD SDI (IN 2)
Auto detection, 1 line, BNC x 1
HD/SD SDI (OUT)
Digital signal output
(compatible with EMBEDDED AUDIO)
1 line (switched out), BNC x 1
AUDIO ASSIGN
Analogue audio signal input:
1 line, RCA x 2, 500 mV (rms), high impedance
AUDIO ASSIGN (MONITOR OUT) Analogue audio signal output: 1 line, RCA x 2, 500 mV (rms)
MAKE/TRIGGER
RJ-45 x 1 (8-pin)
RS-485
RJ-45 x 2 (IN/OUT) (8-pin)
RS-232C
D-sub (9-pin) x 1
Audio
External Control
CRC error
Dimensions
Over level
Input Format
VIDEO
Signal name
COMPUTER
Input terminals
Video
DVI-D with
Component/
HD/SD SDI
HDCP (video)
RGB
Signal name
Input terminals
DVI-D (PC)
NTSC
✓
̶
̶
̶
VGA60
✓
PAL
BW(50Hz/60Hz)
✓
✓
̶
̶
̶
̶
̶
̶
W-VGA60
✓
SVGA60
✓
480/60i
̶
✓
✓
✓
XGA60
✓
576/50i
̶
✓
✓
✓
480/60p
̶
✓
̶
✓
W-XGA60 (1280 x 768)
W-XGA+60 (1440 x 900)
✓
✓
576/50p
̶
✓
̶
✓
SXGA60 (1280 x 1024)
✓
640 x 480/60p
720/24p, 25p, 30p
720/50p, 60p
1080/50i, 60i
1080/50p, 60p
1035/60i
1080/24p, 25p, 30p
1080/24psf, 30psf*1
Front Panel
12 JVC LCD MONITORS
̶
̶
✓
1920 x 1080@60/50
✓
̶
✓
✓
̶
1280 x 720@60/50
✓
̶
̶
✓
✓
✓
✓
✓
✓
W-SXGA+60 (1680 x 1050)
✓
U-XGA60(1600 x 1200)
✓
̶
̶
̶
✓
W-UXGA60 (1920 x 1200)
✓
̶
✓*1
✓
✓*1
̶
✓
✓
✓
̶
✓
✓
̶
̶
*1: It is displayed by 1080/60i.
86 (3-1/2)
40 (1-5/8)
1.5
(1/16)
VESA
(M4, D: 10 mm)
100
304 (12)
395 (15-5/8)
Waveform
monitoring
344.8 (13-5/8) (High)/
309.5 (12-1/4)(Low)
*Information
can be
displayed in
the upper or
the lower
blank area.
With desktop stand
Without stand
Including stand
Excluding stand
Provided Accessories
Level meter
Level meter
Operating temperature
Operating humidity
Storage temperature
DT-V9L1D
240 (9-1/2)
34 (1-3/8)
199 (7-7/8)
Unit: mm (inches)
Option  TS-W17FD1 (Protective screen)
 RK-C17D1 (Rack mount adapter)
115 (4-9/16) 100
DT-V24L3D
Make/
trigger
DT-V17L3D
Multi-format HDTV/SDTV LCD monitor
Type 17 wide format
16:10
17" wide, active matrix TFT
367.2 x 229.5 mm (14-7/16 x 9")
1440 x 900 (W-XGA+)
16.77 million
160˚
140˚
400 cd/m2
600: 1
31.469 kHz to 75.000 kHz
48 Hz - 65 Hz
Depending on the signal within the range of these
frequencies, some signals may not be displayable,
in which case, "Out of range" is shown.
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Internal: 1.0 W + 1.0 W (L/R)
5˚C to 35˚C (41°F to 95°F)
20% to 80% (non condensing)
-25°C to 60°C (-13°F to 140°F)
AC 120/220-240 V, 50/60 Hz/DC 12-17 V
0.56 A (AC 120 V), 0.36 A (AC 220-240 V)
3.0 A (DC 12-17 V)
395 x 344.8 x 199 mm (15-5/8" x 13-5/8" x 7-7/8")
395 x 304 x 86 mm (15-5/8" x 12" x 3-1/2")
7 kg (15.5 lbs.)
5.3 kg (11.7 lbs.)
AC power cord, power cord holder, screw x 2 ( for power
cord holder), Ferrite core x 1 ( for external battery)
Protective screen/rack mount adapter
<Bottom of stand>
140 (5-5/8) φ8
(ø1/2)
210 (8-3/8)
240 (9-1/2)
120.6 (4-7/8)
RS-485
In/Out
CONTROLS
RS-232C
15
5/8
CONTROLS
INPUT TERMINALS
DT-V9L1D
Specifications
TM-17L2D
LM-H191
Audio Output
Environmental Conditions
Operating temperature
Operating humidity
Storage temperature
Achieving HD images, faithful to original
signals, with less than one frame of latency
With desktop stand
Without stand
Weight
Including stand
Excluding stand
Provided Accessories
Features
 800x480 pixels
 AC/DC operation
 Gold-plated HD/SD SDI terminals with embedded audio
 High-performance LCD panel
 Exclusive JVC image processing technology
 Status display in unused section of 19:9 panel
 Wide selection of video production functions
 Easy-to-operate front panel controls
 Rugged, adjustable stand provided
 Focus assist function
Status Display
Source ID
Status
Option
Audio
Level meter
Level meter
External Control
Dimensions
VIDEO
Signal name
NTSC
(Analogue
(Composite) component)
✓
̶
PAL
BW(50Hz/60Hz)*1
✓
✓
480/60i
̶
576/50i
480/60p
576/50p
720/50p, 60p
1035/60i
1080/50i, 60i
1080/24psf/25psf*3/30psf*3
̶
̶
̶
̶
̶
̶
̶
̶
̶
HD/SD SDI
116 (4-5/8)
27.5
(1-1/8)
Make/
trigger
Tally lamp
Audio level
meter
Source ID
display
Focus
assist
Dynamic
mode
Stand
(Tilt & hight
adjustable)
Rack
mount
(Option)
VESA
Carrying
handle
Protective
screen
(Provided)
Power
AC/DC
100
75
75
100
37.5
(1-1/2)
55
(2-1/4)
13
(5/8)
185 (7-3/8)
Unit: mm (inches)
̶
RS-232C
Rear Panel
176 (7-1/4)
1.5
(1/16)
186 (7-3/8)
Input terminals
Video/Component
Y/PB/PR
VBS
218 (8-5/8) (High)/
181 (7-3/16) (Low)
Input Format
Speaker
mono
VESA
(8-M4, 10 mm)
222.4 (8-13/16)
*The level meters can be displayed at either the upper or lower (super impose)
part of the screen. (selectable)
Audio
In/Out
Safety
marker
Input/Output Terminals
Video
VIDEO
Composite video signal input/output: 1 line,
BNC x 2, 1 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection)
(auto termination)
Analogue component signal
COMPO.
input/output: 1 line, BNC x 6
(Y, Pb/B-Y, Pr/R-Y)
Video signal: Y: 1 V (p-p), 75 ohms,
Pb/B-Y, Pr/R-Y: 0.7 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection)
(auto termination)
HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO):
Auto detection, 1 line, BNC x 1
HD/SD SDI (OUT)
Digital signal output
(compatible with EMBEDDED AUDIO)
1 line, BNC x 1
AUDIO ASSIGN
Analogue audio signal input:
1 line, RCA x 1, 500 mV (rms), high impedance
AUDIO ASSIGN (MONITOR OUT) Analogue audio signal output: 1 line, RCA x 1, 500 mV (rms)
MAKE/TRIGGER
RJ-45 x 1 (8-pin)
RS-232C
D-sub (9-pin) x 1
HD/SD SDI
Gold-plated
Area marker
LM-H171
Power Requirements
Rated Current
Dimensions (WxHxD)
excluding protrusions)
DT-V9LD
Multi-format HDTV/SDTV LCD monitor
Type 9 wide format
15:9
9" wide, active matrix TFT
195 x 117 mm (7-11/16 x 4-5/8")
800 x 480 (WVGA)
approx. 16.2 million
170˚
170˚
350 cd/m2
400: 1
6 msec
HD SDI: BTA S-004B, SMPTE292M
SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
1.0 W (Mono)
0˚C to 40˚C (32°F to 104°F)
20% to 80% (non condensing)
-20°C to 60°C (-4°F to 140°F)
AC 120/220-240 V, 50/60 Hz/DC 12-17 V
0.35 A (AC 120 V)/
1.7 A (DC 12 V)
222.4 x 181 [Low] x 202 [Low] mm
(8-13/16" x 7-1/8"[Low] x 8"[Low])
222.4 x 176 x 116 mm
8-13/16" x 6-15/16" x 4-5/8"
3.6 kg (7.9 lbs.)
2.7 kg (5.9 lbs)
Protective screen x1, screw x4 (for protective screen),
AC power cord, power cord holder,
screw x 2 (for power cord holder)
Rack mount adapter
OPERATION
TM-19L2D
Model
Type
Screen Size
Aspect Ratio
LCD Panel
Effective Screen Size (W x H)
Pixels
Display Colours
Viewing Angle
Horizontal
Vertical
Brightness
Contrast Ratio
Response Time (G to G)
Applicable Standard
FUNCTIONS
9” HD Multi-Format AC/DC LCD Monitor
INSTALLATION
DT-V SERIES
<Bottom of product>
̶
̶
✓
✓
✓
✓
✓
̶
✓
̶
✓
✓
✓*2
✓
✓*2
✓
✓*3
✓*3
Tap holes
*1: BW(50Hz); Status display is displayed by PAL.
BW(60Hz); Status display is displayed by NTSC.
*2: Status display is displayed by 1080/60i.
*3: 1080/25psf; Status display is displayed by 1080/50i.
1080/30psf; Status display is displayed by 1080/60i.
Option  RK-C9D1 (Rack mount adapter)
Front Panel
JVC LCD MONITORS 13
Features of TM and LM Series
High quality picture and JVC unique functions
Easy installation
 High performance S-XGA LCD panel with various inputs
 Compact square, all-in-one design
TM-series and LM-series realize JVC high quality pictures with S-XGA LCD
panels. Not only the high quality pictures, TM series equipped SDI input
for digital signals and LM-series equipped VGA and DVI input for PC
signals besides NTSC/PAL video inputs for your professional applications.
Both series can control aspect and signal inputs with Make/Trigger remote
control and can adjust various picture settings with front control buttons
conveniently.
This slim, space-saving, all-in-one design enables easy installation on a
shelf or in a rack.
For added convenience, a VESA standard mounting (100mm x 100mm) is
provided. A rugged metal base rear cabinet with 4-hole patterns for
additional screws assures secure installation and prevents monitor from
being displaced or falling.
 JVC unique functions
Both series equipped colour temperature settings which you can select 3
settings of colour temperature depends on your various usage.
Besides colour temperature setting, TM series equipped “Selectable
scanning modes (Narrow / Overscan / 1:1)” and LM series equipped
“Picture modes (standard / dark enhanced / Vivid / Dynamic)” which are
JVC unique functions you can best fit your monitors conveniently by direct
front controls.
VESA
 Colour temperature setting
Three colour temperature settings are provided: 9300K (High), 6500K
(Low), User-Defined setting.
 Selectable scanning modes (TM series)
You can select 3 modes of picture sizes.
 Robust front cabinet and metal rear cabinet
Robust and metal cabinet provides rugged durability for use in a variety of
professional applications.
 Connector guard construction
With a speaker grill and enforced edge design, protruding volume controls
and switches are sheltered to prevent mis-operation and damage. On the
back of the monitor, the concave design helps protect the connectors.
This attractive, efficient design is both practical and safe.
 Picture modes (LM series)
You can select 4 modes of JVC recommended picture settings.
Standard Mode
Standard Mode
Standard Mode
Dark Enhanced Mode
Vivid Mode
Dynamic Mode
Dark Enhanced Mode to increase
visibility of underexposed images.
Vivid Mode to reproduce vivid colours
for images with high saturation and
increased contrast.
Dynamic Mode to reproduce midluminance images more brightly and
clearly by sacrificing high luminance.
14 JVC LCD MONITORS
 Adjustable stand
The provided metal table top stand can be tilted up (20 degree) or down (8
degree) for easy viewing and more flexible positioning. You can also install
the monitor directly on a platform – useful when you need to install in a
location with a height limit ( for example, on a shelf or in a rack).
 Built-in monaural speaker
CONTROLS
19” TFT-LCD SXGA (1280 x 1024 pixels)
17” TFT-LCD SXGA (1280 x 1024 pixels)
INPUT TERMINALS
TM-19L2D
TM-17L2D
TM SERIES
For Europe and Asia only
Specifications
 1300:1 (TM-19L2D) and 1000:1 (TM-17L2D) high contrast
 CTI / LTI / Sharpness / White balance for customising
picture setting
 Colour Transient Improvement (CTI): adjustment of the
contours and edges of colour signal
 Luminance Transient Improvement (LTI): adjustment of the
contours and edges of individual luminance signals
Make/
trigger
FUNCTIONS
1:1 mode
OPERATION
INSTALLATION
CTI/LTI
Stand
(Tilt & hight
adjustable)
Rack
mount
(Option)
VESA
Power
AC
TM-19L2D (TM-17L2D)
Unit: mm
<Front view>
413 (374)
<Stand bottom>
104 (104)
199 (199)
Precise picture quality
Rack Mount (Option)
Provided Accessories
Dimensions
Speaker
Mono
IN (Monaural, RCA) x 2
IN (Monaural, RCA) x 2
Composite video:PAL,NTSC,Monochrome (50Hz/60Hz)
480/60i, 576/50i
Make Trigger (RJ-45)
Internal speaker: 0.8 W (monaural)
Tilt (Up 20°/Down 8°), Height (Adjustable 2 steps)
5°C to 35°C
-15°C to 60°C
AC 120V, 220-240V, 50/60Hz
413 x 404.8 x 199 mm
374 x 375 x 199 mm
374 x 334 x 74 mm
413 x 364 x 74 mm
7.5 kg
8.2 kg
5.8 kg
6.4 kg
9U
8U
AC Power Cord , Stand
With stand
Without stand
Including stand
Excluding stand
364 (334)
 Remote terminal (Make/Trigger) via RJ45
 Front panel selection keys for Standby/On, Input Select,
Picture Control and Aspect Ratio
 Front panel direct control keys (SCAN SIZE, COLOUR OFF,
BLUE CHECK, ASPECT)
 Selectable picture size
 Multiple video inputs
 Built-in power supply
 Power save mode and grey back mode
 Security cable slot
 Control lock
 VESA 100 mount
 9U (TM-19L2D) and 8U (TM-17L2D) rack mount option
404.8 (374.8) (at the higher position)
369.5 (339.5) (at the lower position)
Professional features
Composite Video: 2 line BNC x 4, 1V(p-p), 75 Ω
The input (IN) and output (OUT) terminals are bridgeconnected. (Auto termination)
Y/C x 1 (Video1)
2 Line BNC x 2, Switched out BNC x 1
S-Video
SDI
Audio
Video
SDI
Video
SD SDI
Remote Control
Audio Output
Stand
Operating temperature
Storage temperature
Powerc Requirements
Dimensions (W x H x D)
excluding protrusions
Weight
TM-17L2D
LCD Monitor
PAL and NTSC
5:4
19" active matrix TFT
17" active matrix TFT
Width: 376.3 mm (14-13/16"), Width: 337.9 mm (13-7/16"),
Height: 301 mm (11-13/16") Height: 270.3 mm (10-3/4")
1280 x 1024 pixels (SXGA)
16.7million
160°
178°
160°
178°
2
300 cd/m
1300:1
1000:1
8 msec
5 msec
Number of Pixels Displayed
Display Colours
Viewing Angle
Horizontal
Vertical
Brightness
Contrast Ratio
Response Time (G to G)
Input/Output
Video
Terminals
Video 1
Video 2
JVC’ s new LCD monitor, designed with
the professional in mind
Audio
In
Tally lamp
TM-19L2D
Model
Type
Colour System
Aspect Ratio
LCD panel
Effective Screen Size
Support Format
SDI x 2
Rear Panel
240 (240)
High reliability
 High build quality
 Connector protection structure
 Front control layout designed to protect control parts
during installation and transfer
 Error detection circuit in inverter
<Side view>
29 (30.2)
<Rear view (without the stand)>
74 (74)
100 (100)
1.5 (1.5)
100 (100)
 Compact square design for wall mounting
 Tilt & height position adjustment
 Rugged, adjustable stand
Option
 Rack mount adaptor (RK-C179L2)
46 (46)
Front Panel
187 (187)
Easy installation
100
VESA mounting holes
(4-M4, depth: 10 mm)
199 (199)
JVC LCD MONITORS 15
Brightness
Contrast Ratio
Response Time
Input/Output
Terminals
Professional features
 Rack mount capability
 Security Category Regulation compliant
 Remote terminal (Make/Trigger: RJ45)
 Control lock
 Direct Front Control Keys
 Front panel adjustment of Stand By/ON, input select, picture control,
aspect ratio and Auto ADJ.
 Security wire slot
 4 BNC video inputs with loop through
 Built-in power supply
 Selectable scan size (Narrow/Over)
 Power Save Mode and Gray Back Mode
 VESA 100 mount
 Quick Switching Speed
Precise picture quality
Rear Panel
 1300:1 High contrast (1000:1 for LM-H171)
 AV chip inside for professional use
Good for video picture, compared with PC monitors
 CTI/LTI/Sharpness/White balance for Customising picture setting
 Colour Transient Improvement (CTI):
Adjustment of the contours and edges of colour signal.
 Luminance Transient Improvement (LTI):
Adjustment of the contours and edges of individual luminance signals.
High reliability
 High reliability and fire safety structured:
Metal rear cabinet/Fire-retardant front cabinet
 Connector protection structure
 Front control design (Designed to protect control parts during
installation and transfer)
 Error detection circuit in inverter
 Designed for 24/7 operation
Easy installation
 High performance picture quality with new Picture Mode (Standard
Mode, Dark Enhanced Mode, Vivid Mode and Dynamic Mode)
 2 BNC video inputs with loop through
 Input terminals for a wide range of devices:
Support industrial/medical cameras (Y/C input terminal)
 Compact square design for wall mounting
 Tilt & Height position adjustment
 Rugged, adjustable stand
Option
 Rack mount adaptor (RK-C179L2)
Front Panel
16 JVC LCD MONITORS
160°
160°
300 cd/m2
1000:1
5 msec
1300:1
8 msec
Video
Video 1
Video 2
Composite video: 2 line, BNC connector x 4, 1 V(p-p), 75Ω
The input (IN) and output (OUT) terminals are bridgeconnected. (Auto termination)
Y/C: 1 line (Priority input VIDEO 1)
1 line
1 line (D-sub 15-pin)
S-Video
RGB
DVI-D
Audio
AUDIO 1
AUDIO 2
AUDIO (DVI-D)
AUDIO (RGB)
Video
PC
Support Format
Analogue audio: 2 line mono, RCA x 2
Analogue audio: 2 line (Stereo mini jack) x 2
Composite video: NTSC, PAL, Monochrome (50 Hz/60 Hz)
DVI - D, Analog RGB (D-sub 15-pin)/VGA: 640 x 480
(60 Hz)*, 640 x 576 (50 Hz)/SVGA: 800 x 600* (56 Hz)*,
800 x 600 (60 Hz)/XGA: 1024 x 768 (60 Hz), 1024 x 768*
(70 Hz)*/WXGA: 1280 x 768 (60 Hz)/SXGA: 1280 x 1024
(60 Hz)/ US TEXT: 720 x 400* (70 Hz)*
*Support only analog
signals (Vertical
frequency): Refresh rate
Remote Control
Audio Output
Stand
Operating temperature
Storage temperature
Power Requirements
Dimensions (W x H x D)
excluding protrusions
Make Trigger (RJ-45)
Internal speaker: 0.8 W (monaural)
Tilt (Up 20°/Down 8°), Height (Adjustable 2 steps)
5°C to 35°C (41°F to 95°F)
-15°C to 60°C (5°F to 140°F)
AC 120V, 220-240V, 50/60Hz
413 x 404.8 x 199 mm
374 x 374.8 x 199 mm
(16-3/8" x 14-5/8" x 7-7/8") (14-3/4" x 13-3/8" x 7-7/8")
413 x 364 x 74 mm
374 x 334 x 74 mm
(16-3/8" x 14-3/8" x 3")
(14-3/4" x 13-1/4" x 3")
7.5 kg (16.5 lbs.)
8.2 kg (18 lbs.)
5.8 kg (12.8 lbs.)
6.4 kg (14.1 lbs.)
9U
8U
AC Power Cord
With stand
Without stand
Including stand
Excluding stand
Weight
Rack Mount (Option)
Provided Accessories
Dimensions
LM-H191
413 (16-3/8)
Unit: mm (inches)
29 (1-1/4)
1.5
(1/16)
74 (3)
100
46
(1-7/8)
LM-H171
374 (14-3/4)
199
(7-7/8)
30.2 (1-1/4)
1.5
(1/16)
74 (3)
*2: 339.5 (13-3/8) at
the lower position
Stand bottom
104 (4-1/8)
240 (9-1/2)
46
(1-7/8)
199
(7-7/8)
187 (7-3/8)
INPUT TERMINALS
JVC’s new LCD monitor designed for superb
visual performance and precise resolution.
178°
178°
187 (7 3/8)
Power
AC
16.77 million
Horizontal
Vertical
100
VESA
Display Colours
Viewing Angle
100
Rack
mount
(Option)
Number of Pixels Displayed
PC Scanning Frequency
404.8 (16)* 1
364 (14-3/8)
Stand
(Tilt & hight
adjustable)
LM-H171
LCD Monitor
PAL and NTSC
5:4
19" active matrix TFT
17" active matrix TFT
Width: 376.3 mm (14-13/16"), Width: 337.9 mm (13-7/16"),
Height: 301 mm (11-13/16") Height: 270.3 mm (10-3/4")
1280 x 1024 pixels (SXGA)
H: 31.5 kHz - 65 kHz V: 56 Hz - 75 Hz
Some signals within this frequency range may not be
displayed depending on the computer (“Out of range” appears).
VESA mounting holes
(4-M4, depth: 10 mm)
100
334 (13-1/4
CTI/LTI
LM-H191
Model
Type
Colour System
Aspect Ratio
LCD panel
Effective Screen Size
374.8 (14-7/8)*2
Picture mode
Specifications
199
(7-7/8)
Make/
trigger
CONTROLS
RS-485
In/Out
19” TFT-LCD SXGA (1280 x 1024 pixels)
17” TFT-LCD SXGA (1280 x 1024 pixels)
FUNCTIONS
Speaker
Mono
LM-H191
LM-H171
LM SERIES
INSTALLATION
Audio
In/Out
OPERATION
DVI-D
VESA mounting holes
(4-M4, depth: 10 mm)
OPTIONS
TS-W24F1
Protective screen
For DT-V24L3D
TS-W20F2
Protective screen
For DT-V20L3D
TS-W17FD1
Protective screen
For DT-V17L3D
RK-C20D1
Rack mount adapteor
For DT-V20L3D
(The DT-V20L3D is
designed to fit on
the optional
RK-C20D1, at
a height of 9U.)
RK-C17D1
Rack mount adapteor
For DT-V17L3D
(The DT-V17L3D
can be installed in
a standard EIA rack
with a height of 7U.)
RK-C9D1
RK-C179L2
Rack mount adapteor Rack mount adapteor
For DT-V9L1D
For TM-19L2D
(The DT-V9L1D,
TM-17L2D
two units can
LM-H191
be rack mounted side
LM-H171
by side within a standard
EIA rack with
a rack height of 4U.)
CONTROLS
INPUT TERMINALS
ICON EXPLANATION
HD/SD SDI
DT-V24/V20/V17 has 2 multi-format HD/SDI inputs (HD/SD automatic switching). DT-V9 is equipped with one input which accepts various HD signals. The SDI terminal is gold-plated to prevent corrosion
and signal loss, and also works with embedded audio.
DVI-D
Connects a computer monitor (DVD-I) output terminal. HDCP stands for High-Bandwidth Digital Content Protection. This technology is copyright protected.
Audio
Equipped with Audio Input/Output terminal.
Speaker
Built-in mono/stereo internal speaker.
RS-232C
This equipment can be controlled from your PC via an RS-232C terminal (D-SUB 9 pin).
RS-485
This equipment can be controlled from your PC via an RS-485 terminal with a straight LAN cable.
Make/trigger
The Make/Trigger terminal acts as an remote terminal, which acts according to the selected control mode. Make mode: Controls functions with short-circuiting pins (short with GND) or a disconnecting
circuit (terminal open). Trigger mode: Controls functions by instantaneously inputting pulse signals to the pins.
LAN remote
Equipped with a remote LAN enabling menu control via a network computer, allowing the state of the monitor to be checked, turned on or off, and remote control of colour calibration and other functions
in the TV menu. If trouble occurs, the monitor will send an error code by e-mail.
Area marker
Area marker aspect ratio and display style are selectable.
Safety marker
The Safety Area is an area which is displayed for certain on the viewer's TV screen, and Safety Marker is displayed on the producer's monitor screen. The display can be controlled using this equipment or
an external control.
Tally lamp
Equipped with a Tally Lamp. In addition to Tally functions, input signals can be identified with lighting colours in green and red.
Time code
Displays the time code superimposed on SDI signals (00:00:00:00 Hours Minutes Seconds Frames).
CRC error
Determines display or non-display of CRC errors when Cyclic Redundancy Check (CRC) HD SDI signals are input. If an error occurs, a red square is displayed.
FUNCTIONS
Audio level
meter
Source ID
display
Checks the state of signals input from the embedded audio level meter, and sets colour and brightness values, and the minimum input level.
An arbitrary name for the input image source (10 letters) can be registered with the character set function (RS-232C method is also applicable), and display or non-display of the name can be specified.
1:1 mode
Displays an image with the same resolution (same magnification) as that of the input signal.
I/P mode
IP conversion mode can be selected from NORMAL (frame complement), FIELD (field complement) and CINEMA for films (24p).
Waveform
monitoring
A waveform monitor with high display quality is equipped to mainly check the level of luminance (Y) signals. If a certain set value is exceeded, the waveform turns red with the level-exceeded function.
The gain control function compensates cable gain attenuation in analogue mode, and the auto-off function prevents an image from being burned onto the LCD.
Picture mode
Four new picture modes have been adopted; Standard; Dark enhanced mode for more visibility of underexposed images; Vivid mode with higher saturation and contrast; and Dynamic mode with brighter and
more vibrant images based on Vivid mode.
CTI/LIT
CTI: COLOR TRANGENT IMPROVEMENT Adjusts the clarity of the outlines of colour signals, and increases colour border contrast. LTI: LUMINANCE TRANGENT IMPROVEMENT Adjusts the clarity of
the outlines of colour signals, and increases colour border contrast.
Native HD
1920 x 1080
Motion
Sensor
PIP/PBP
Uses 1920x1080 full Hi-Vision LCD to provide clear details.
An attached human detection sensor enables switching of monitor functions.
PIP (PICTURE IN PICTURE) Displays a small sub-screen in the main screen. PBP (PICTURE BY PICTURE) Dual display and screen size are selectable.
OPERATION
INSTALLATION
High
Provides clear images even in bright situations, making 700CD high brightness visible even from a distance.
Brightness
24-hour 7
days operation Uses an advanced electrolytic condenser allowing 24-hour operation. The robust full-metal cabinet supports long-term operation with high reliability.
Stand (Tilt &
height adjustable) The attached metal stand can be tilted up and down. It can be also directly grounded by turning it at its maximum height.
Rack mount
Mounting is available according to the application as described above.
VESA
All items are equipped with a screw hole in compliance with the Vesa Standard.
Carrying
handle
Comes with a handle to enable easier portability — helpful in outdoor locations and studios.
Slim bezel
The slim frame never blocks images and saves space. The design is suitable for combinations of multiple displays.
Power
Green indicates the monitor is on, orange indicates standby, and flickering orange indicates energy-saving mode.
JVC LCD MONITORS 17
GM SERIES
GM-F420S
GM-F470S
GM-F520S
42"/47"/52"
1920 x 1080 Full HD LCD Monitor
Superior full HD picture performance,
stylish super-thin bezel design, with high reliability
42”
GM-F420S
52”
47”
GM-F470S
 Features
Extended Line up of 3 sizes for varying applications
● 3 sizes of 42/47/52 - inches
Excellent Picture Quality & Performance
● Native Full HD 1920x1080 pixels resolution
● Panel brightness of 700 cd/m2 highly visible even under outdoor
ambient lighting
● Wide viewing angle, up to 178 degree ( vertical/horizontal )
Functional & Stylish Design
● Ultra-slim bezel of 15mm width ( GM-F420S/GM-F470S ) and
17mm width (GM-F520S ) permits Video Wall application
● Also vertically positionable
High Reliability
● Continuous operations 24 hours/7 Days a week
● Full metal cabinet using light-weight aluminum
Comprehensive System Connectivity & Networking
● “LAN Remote” allows off-site control & monitoring via network PC
● Professional connectivity; RS-232C, MAKE/TRIGGER, RS-485
● Flexible installation ( multiple mounting points )
● When detecting a person, “Motion sensor” feature automatically
switches functions for timely information display
● A/C outlet provides power for additional device JVC recommend (eg. PC)
● Rear space for integrating system unit ( eg. PC; set-top box )
● Multi-screen, Video Wall use ( 1x2 to 5, 2 to 5x1,2x2 upto 5x5
Tile Matrix capable )
● VESA wall mount compatible
GM-F520S
 Mechanical Feature
Front
17mm
(GM-F520S)
Rounded Corner
15mm
(GM-F420S/
GM-F470S)
EE Sensor
 Motion sensor
JVC Logo is removable by
screw when using as portrait.
And the position can be changed.
Rear
Handle (bundled with monitor)
Input and
output
terminals
Arms for VESA
VESA
The “Motion sensor”, a JVC
Original Innovation designed
specifically for Digital Signage
and Point-of-Sales
applications, triggers
pre-programmed functions to
display timely information such
as promotional messages to the viewers.
・Detectable distance: up to 5m ( max.)
・Detectable angle: 80 degree horizontally and 80 degree vertically
・Continuous detection until the viewer stops moving or steps out of range.
・The "Motion sensor" can be setup on the top or bottom of the LCD.
18 JVC LCD MONITORS
Monitor
speaker
AC IN/OUT
Rear space
for system
unit
GM-F420S
42 inch LCD monitor
Model
Type
LCD Panel
Screen Size
Aspect Ratio
Pixel Number
Brightness
Viewing Angle
Contrast Ratio
Response Time (G to G)
Display colour
Video
Signal Format
RGB
DVI (HDCP)
Dimensions ( W x H x D )
Bezel
Operating Temperature
Storage Temperature
Power Requirements
Weight
Frequency
Speaker
Ext. Speaker Connector
Accessories
GM-F520S
52 inch LCD monitor
GM-F470S
47 inch LCD monitor
TFT Active Matrix
47 inch
16:9
1920 x 1080
700 cd/m2
89/89/89/89
42 inch
INPUT TERMINALS
 Specifications
52 inch
1000:1
DVI-D
Audio
In/Out
Speaker
Stereo
RS-232C
2000:1
9 msec
Input/Output Terminals
Video
RGB input
RGB output
PC
DVI input
Audio 1 * Selectable for each Video and PC input
Audio
Audio 2 * Selectable for each Video and PC input
Audio out
RS-232C
RS-485 / MAKE / TRIGGER IN
External Control
RS-485/IR OUT
LAN Remote
LAN Remote
CONTROLS
1.07 billion (10-bit)
16.7 million (8-bit)
NTSC / PAL / SECAM / PAL-M / PAL-N
VGA-FHD (1920 x 1080)
VGA-FHD (1920 x 1080) 60 Hz
963.6 x 556.6 x 151.2 mm (38 x 22 x 6 inches) 1075.2 x 620.4 x 151.2mm (42-3/8 x 24-1/2 x 6 inches) 1199.2 x 695.2 x 161.5 mm (47-1/4 x 27-3/8 x 6-3/8 inches)
15 mm
17 mm
0°C to 40°C (32°F to 104°F)
-20°C to 60°C (-4°F to 140°F)
AC 120 / 220 - 240 V
24.9 Kg (54.8 lbs)
29.8 Kg (65.6 lbs)
40 Kg (88 lbs)
50 Hz / 60 Hz
1.7 W + 1.7 W
2.3W + 2.3W
AC power cord, Power cord holder, Remote control, Motion sensor, Stand
RS-485
In/Out
Make/
Trigger
Native HD
1920 x 1080
High Brightness
700 cd/m2
BNC x 1, with bridge out
D-sub (15-pin) x 1 (DDC2B)
D-sub (15-pin) x 1 (Active output)
DVI-D x 1 (DDC2B)
RCA x 2 ( L / R ), 500 mV (rms) with bridge out
Stereo Mini Jack x 1, 500mV (rms) with bridge out
Speaker output terminal (L / R)
D-sub (9-pin) x 1
RJ-45 x 1 (8-pin)
RJ-45 x 1 (8-pin)
RJ-45 x 1 (8-pin)
FUNCTIONS
Motion
Sensor
Slim bezel
15 mm (for GM-F420S/F470S)
17 mm (for GM-F520S)
 Control Terminal
Unit: mm (inches)
GM-F420S
69.6 (2-7/8)
81.6 (3-1/4)
Source ID
VESA
Power
AC
 Input/Output Terminal 2
526.6 (20-3/4)
556.6 (22)
963.6 (38)
933.6 (36-7/8)
Picture mode
OPERATION INSTALLATION
 Input/Output Terminal 1
PIP/PBP
24-hour 7 days
operation
E & O E. Design and specifications subject to change without notice.
 Dimensions
Remote
Control
SENSOR EXT. SPEAKER
OUT
R
L
151.2 (6)
 Input/Output Terminal 3
GM-F470S
1075.2 (42-3/8)
1045.2 (41-1/4)
AC OUT
69.6 (2-7/8)
AC IN
I
0
81.6 (3-1/4)
590.4 (23-1/4)
620.4 (24-1/2)
( 2A )
Provided Accessories
151.2 (6)
• Stand
GM-F520S
• Remote control
1199.2 (47-1/4)
1165.2 (45-7/8)
79.9 (3-1/4)
81.6 (3-1/4)
695.2 (27-3/8)
661.2 (26-1/8)
• Motion sensor
• Power cord holder • AC power cord
161.5 (6-1/4)
All pictures are simulated.
JVC LCD MONITORS 19
Printed in Japan
ICN-0383
“JVC” is the trademark or registered trademark of Victor Company of Japan, Limited.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising