twin spot welding unit - CEA | Welding together

twin spot welding unit - CEA | Welding together
DUAL
TWIN SPOT WELDING UNIT
The twin spot welding units are the most suitable solution for single side
welding and they ensure the possibility to realise multi spot welding
equipment in a simple and cheap way. Each twin spot unit is fitted with its
own welding control, thus allowing independent operation or, by connecting
more units together, the operator can weld either in electric or pneumatic
cascade or simultaneously.
40÷180mm
TECHNICAL DATA
Technical features might change without notice
Single phase input 50/60 Hz
DUAL
30
V
400
Rated power at 50%
kVA
30
Max. welding power
kVA
96
Installed power
kVA
20
Delayed Fuse
A
63
Open Circuit Voltage
V
6
Short circuit current
kA
20
Max. welding current
kA
16
Work stroke
mm
60
Distance between electrodes
mm
40 - 180
Electrode force max (6 bar)
daN
2 x 180
Water consumption a 300 kPa (3 bar)
l/min
4
Dimensions
Weight
mm
380
mm
162
mm
630
kg
68
Other voltages available on request
PUSH PULL
These power sources are built for industrial environment use. EMC (CISPR 11): class A
The “push-pull” system allows to operate on thicker
thickness; it’s obtained by connecting a special
version of DUAL 30 to another unit without any
control.
ISO 9001: 2008
2020H209 - 09/2013 - DUAL
WWW.CEAWELD.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement