Sony | VGN-BX540 | Replacement Instructions | Sony VGN-BX540 Replacement Instructions

Cingular SIM Card
BX Series - Replacement Instructions
IMPORTANT!
PLEASE READ BEFORE YOU START
These easy instructions are intended to guide you through the replacement process.
9 To avoid electric shock please make sure product is turned off and AC Adaptor is disconnected
from the power source. Remove jewelry before you begin work to avoid scratching the surface
of your notebook computer.*
9 Place your notebook computer on a clean, stable and covered surface to avoid damage to
the computer's case.*
9 Follow the ESD (Electrostatic Discharge) damage prevention instructions:
o Hold parts by the edges, away from exposed circuitry when possible.
o Do not walk around excessively as this promotes static build-up.
9 The appearance of the electronic components shown in the illustrations may be different from
the components shipped. This slight difference does not affect the accuracy of these
instructions.
* Sony is not responsible for any loss of data associated with your computer or any damage caused by
incorrect handling of the computer under these procedures. The terms of your Sony Limited Warranty
continue to apply.
SIM CARD COMPARTMENT
Step 1. Prepare the Computer.
CAUTION: Make sure the
computer is turned off, and the AC
Adapter is disconnected.
Place the computer on a protected
surface in upright position with the
left edge facing you.
P/N 994645200
Rev. B
SIM CARD LOCATION
Step 2. Open SIM Card door.
Step 3. Locate the SIM Card.
Locate SIM Card compartment in
middle back edge of your computer.
The SIM Card is located under the
plastic cover.
Gently slide forward the door as
shown.
1/2
Cingular SIM Card
BX Series - Replacement Instructions
Step 4. Unseat the SIM Card.
Step 5. Remove the SIM Card.
Use your thumb or finger and gently
press the SIM Card in and release
the pressure.
The SIM Card will pop up out of the
slot; proceed to remove it.
Step 6. Punch the SIM Card out of
the card.
Step 9. Start the VAIO SmartWi
Connection Utility.*
1. Start your computer.
2. Click the SmartWi
Connection Utility icon in
the task bar.
Step 7. Insert the new SIM Card.
Step 8. Close Plastic Cover.
Place the SIM Card in the slot as
shown and gently push down the
SIM card until you hear a click.
Release the pressure. The SIM
Card should remain fully in the slot.
Align plastic cover, close it and
carefully slide it back in place.
3. From the SmartWi main
screen, click the Cingular
button, and then click in the
Cingular Connection
Manager launch area below
the button.
4. Call (888) 739-VAIO (8246)
to activate your account.
* Note: The VAIO SmartWi Connection Utility Guide provides detailed information on how to use the SmartWi
Connection Utility. To view the guide, click Start, point to All Programs, and click VAIO Control Center. Make
sure that the Categories tab page is active. Click the Documentation folder, and then click VAIO SmartWi
Connection Utility Guide.
P/N 994645200
Rev. B
2/2
Download PDF

advertising